diff mbox series

xen/arm: vgic-v3: Fix the typo of GICD IRQ active status range

Message ID 1577498922-192711-1-git-send-email-xuwei5@hisilicon.com (mailing list archive)
State New, archived
Headers show
Series xen/arm: vgic-v3: Fix the typo of GICD IRQ active status range | expand

Commit Message

Wei Xu Dec. 28, 2019, 2:08 a.m. UTC
This patch fixes the typo about the active status range of an IRQ
via GICD. Otherwise it will be failed to handle the mmio access and
inject a data abort.

Fixes: a2b83f95bfad ("xen/arm: vgic: Properly emulate the full register")

Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
---
 xen/arch/arm/vgic-v3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Julien Grall Dec. 28, 2019, 8:09 a.m. UTC | #1
Hi,

On 28/12/2019 03:08, Wei Xu wrote:
> This patch fixes the typo about the active status range of an IRQ
> via GICD. Otherwise it will be failed to handle the mmio access and
> inject a data abort.
I have seen a patch similar from NXP a month ago and I disagreed on the 
approach.

If you look at the context you modifed, it says that reading ACTIVER is 
not supported. While I agree the behavior is not consistent accross 
ACTIVER, injecting a data abort is a perfectly fine behavior to me 
(though not spec compliant) as we don't implement the registers correctly.

I guess you are sending this patch, because you tried Linux 5.4 (or 
later) on Xen, right? Linux has recently began to read ACTIVER to check 
whether an IRQ is active at the HW level during the synchronizing of the 
IRQS. From my understanding, this is used because there is a window 
where the interrupt is active at the HW level but the Linux IRQ 
subsystem is not aware of it.

While the patch below will allow Linux 5.4 to not crash, it is not going 
to make it fly very far because of the above. So I am rather not happy 
with persuing with returning 0.

@Stefano, you mention you will look at implementing ACTIVER. What's the 
state?

 >
> Fixes: a2b83f95bfad ("xen/arm: vgic: Properly emulate the full register")
> 
> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
> ---
>   xen/arch/arm/vgic-v3.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/xen/arch/arm/vgic-v3.c b/xen/arch/arm/vgic-v3.c
> index 422b94f..e802f20 100644
> --- a/xen/arch/arm/vgic-v3.c
> +++ b/xen/arch/arm/vgic-v3.c
> @@ -706,7 +706,7 @@ static int __vgic_v3_distr_common_mmio_read(const char *name, struct vcpu *v,
>           goto read_as_zero;
>   
>       /* Read the active status of an IRQ via GICD/GICR is not supported */
> -    case VRANGE32(GICD_ISACTIVER, GICD_ISACTIVER):
> +    case VRANGE32(GICD_ISACTIVER, GICD_ISACTIVERN):
>       case VRANGE32(GICD_ICACTIVER, GICD_ICACTIVERN):
>           goto read_as_zero;
>   
> 

Cheers,
Wei Xu Dec. 28, 2019, 8:57 a.m. UTC | #2
Hi Julien,

On 2019/12/28 16:09, Julien Grall wrote:
> Hi,
>
> On 28/12/2019 03:08, Wei Xu wrote:
>> This patch fixes the typo about the active status range of an IRQ
>> via GICD. Otherwise it will be failed to handle the mmio access and
>> inject a data abort.
> I have seen a patch similar from NXP a month ago and I disagreed on 
> the approach.
>
> If you look at the context you modifed, it says that reading ACTIVER 
> is not supported. While I agree the behavior is not consistent accross 
> ACTIVER, injecting a data abort is a perfectly fine behavior to me 
> (though not spec compliant) as we don't implement the registers 
> correctly.
>
> I guess you are sending this patch, because you tried Linux 5.4 (or 
> later) on Xen, right? Linux has recently began to read ACTIVER to 
> check whether an IRQ is active at the HW level during the 
> synchronizing of the IRQS. From my understanding, this is used because 
> there is a window where the interrupt is active at the HW level but 
> the Linux IRQ subsystem is not aware of it.
>
> While the patch below will allow Linux 5.4 to not crash, it is not 
> going to make it fly very far because of the above. So I am rather not 
> happy with persuing with returning 0.
>

Yes, I am using Linux 5.5-rc2 :)
Got it and thanks for the explanation.
I am not insistent on this and OK to wait for the update.
Thanks and have a very happy new year!

Best Regards,
Wei

> @Stefano, you mention you will look at implementing ACTIVER. What's 
> the state?
>
> >
>> Fixes: a2b83f95bfad ("xen/arm: vgic: Properly emulate the full 
>> register")
>>
>> Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
>> ---
>>   xen/arch/arm/vgic-v3.c | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/xen/arch/arm/vgic-v3.c b/xen/arch/arm/vgic-v3.c
>> index 422b94f..e802f20 100644
>> --- a/xen/arch/arm/vgic-v3.c
>> +++ b/xen/arch/arm/vgic-v3.c
>> @@ -706,7 +706,7 @@ static int __vgic_v3_distr_common_mmio_read(const 
>> char *name, struct vcpu *v,
>>           goto read_as_zero;
>>         /* Read the active status of an IRQ via GICD/GICR is not 
>> supported */
>> -    case VRANGE32(GICD_ISACTIVER, GICD_ISACTIVER):
>> +    case VRANGE32(GICD_ISACTIVER, GICD_ISACTIVERN):
>>       case VRANGE32(GICD_ICACTIVER, GICD_ICACTIVERN):
>>           goto read_as_zero;
>>
>
> Cheers,
>
Stefano Stabellini Jan. 6, 2020, 10:01 p.m. UTC | #3
On Sat, 28 Dec 2019, Wei Xu wrote:
> Hi Julien,
> 
> On 2019/12/28 16:09, Julien Grall wrote:
> > Hi,
> > 
> > On 28/12/2019 03:08, Wei Xu wrote:
> > > This patch fixes the typo about the active status range of an IRQ
> > > via GICD. Otherwise it will be failed to handle the mmio access and
> > > inject a data abort.
> > I have seen a patch similar from NXP a month ago and I disagreed on the
> > approach.
> > 
> > If you look at the context you modifed, it says that reading ACTIVER is not
> > supported. While I agree the behavior is not consistent accross ACTIVER,
> > injecting a data abort is a perfectly fine behavior to me (though not spec
> > compliant) as we don't implement the registers correctly.
> > 
> > I guess you are sending this patch, because you tried Linux 5.4 (or later)
> > on Xen, right? Linux has recently began to read ACTIVER to check whether an
> > IRQ is active at the HW level during the synchronizing of the IRQS. From my
> > understanding, this is used because there is a window where the interrupt is
> > active at the HW level but the Linux IRQ subsystem is not aware of it.
> > 
> > While the patch below will allow Linux 5.4 to not crash, it is not going to
> > make it fly very far because of the above. So I am rather not happy with
> > persuing with returning 0.
> > 
> 
> Yes, I am using Linux 5.5-rc2 :)
> Got it and thanks for the explanation.
> I am not insistent on this and OK to wait for the update.
> Thanks and have a very happy new year!

Hi Wei,

what do you do to reproduce the issue? Are you just booting Linux
5.5-rc2 as dom0 and seeing the issue during boot, or are you doing
something specific?
Wei Xu Jan. 7, 2020, 8:39 a.m. UTC | #4
Hi Stefano,

On 2020/1/7 6:01, Stefano Stabellini wrote:
> On Sat, 28 Dec 2019, Wei Xu wrote:
>> Hi Julien,
>>
>> On 2019/12/28 16:09, Julien Grall wrote:
>>> Hi,
>>>
>>> On 28/12/2019 03:08, Wei Xu wrote:
>>>> This patch fixes the typo about the active status range of an IRQ
>>>> via GICD. Otherwise it will be failed to handle the mmio access and
>>>> inject a data abort.
>>> I have seen a patch similar from NXP a month ago and I disagreed on the
>>> approach.
>>>
>>> If you look at the context you modifed, it says that reading ACTIVER is not
>>> supported. While I agree the behavior is not consistent accross ACTIVER,
>>> injecting a data abort is a perfectly fine behavior to me (though not spec
>>> compliant) as we don't implement the registers correctly.
>>>
>>> I guess you are sending this patch, because you tried Linux 5.4 (or later)
>>> on Xen, right? Linux has recently began to read ACTIVER to check whether an
>>> IRQ is active at the HW level during the synchronizing of the IRQS. From my
>>> understanding, this is used because there is a window where the interrupt is
>>> active at the HW level but the Linux IRQ subsystem is not aware of it.
>>>
>>> While the patch below will allow Linux 5.4 to not crash, it is not going to
>>> make it fly very far because of the above. So I am rather not happy with
>>> persuing with returning 0.
>>>
>> Yes, I am using Linux 5.5-rc2 :)
>> Got it and thanks for the explanation.
>> I am not insistent on this and OK to wait for the update.
>> Thanks and have a very happy new year!
> Hi Wei,
>
> what do you do to reproduce the issue? Are you just booting Linux
> 5.5-rc2 as dom0 and seeing the issue during boot, or are you doing
> something specific?
>
> .
>

I directly tested the mainline kernel with defconfig.
And the 5.5-rc5 kernel booting log is as below:

     root@ubuntu:~# dmesg | more
     [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010]
     [    0.000000] Linux version 5.5.0-rc5 (joyx@Turing-Arch-b) (gcc 
version 4.9.1 2
     0140505 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.05 - 
Linaro GCC 4.9-20
     14.05)) #132 SMP PREEMPT Tue Jan 7 15:43:06 CST 2020
     [    0.000000] Xen XEN_VERSION.XEN_SUBVERSION support found
     [    0.000000] efi: Getting EFI parameters from FDT:
     [    0.000000] efi: EFI v2.50 by Xen
     [    0.000000] efi:  ACPI 2.0=0x181d0e70
     [    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
     [    0.000000] ACPI: Early table checksum verification disabled
     [    0.000000] ACPI: RSDP 0x00000000181D0E70 000024 (v02 HISI  )
     [    0.000000] ACPI: XSDT 0x00000000181D0DB0 0000BC (v01 HISI 
HIP08    0000000
     0      01000013)

But to boot with ACPI on our hardware, except above change I have also 
done some hacking based on
XEN 4.13 as below:

     diff --git a/xen/arch/arm/traps.c b/xen/arch/arm/traps.c
     index d028ec9..215a291 100644
     --- a/xen/arch/arm/traps.c
     +++ b/xen/arch/arm/traps.c
     @@ -1856,8 +1856,8 @@ static bool try_map_mmio(gfn_t gfn)
              return false;

          /* The hardware domain can only map permitted MMIO regions */
     -    if ( !iomem_access_permitted(d, mfn_x(mfn), mfn_x(mfn) + 1) )
     -        return false;
     +    /* if ( !iomem_access_permitted(d, mfn_x(mfn), mfn_x(mfn) + 1) 
) */
     +    /*     return false; */

          return !map_regions_p2mt(d, gfn, 1, mfn, p2m_mmio_direct_c);
      }


     diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
     index 4d6c971..c626f9e 100644
     --- a/xen/arch/arm/mm.c
     +++ b/xen/arch/arm/mm.c
     @@ -1095,7 +1095,7 @@ static bool xen_pt_check_entry(lpae_t entry, 
mfn_t mfn, unsigned int flags)
              {
                  mm_printk("Changing MFN for a valid entry is not 
allowed (%#"PRI_mfn" -> %#"PRI_mfn").\n",
                            mfn_x(lpae_get_mfn(entry)), mfn_x(mfn));
     -            return false;
     +            return true;
              }
          }
          /* Sanity check when removing a page. */


     diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
     index 3c899cd..1e83351 100644
     --- a/xen/arch/arm/setup.c
     +++ b/xen/arch/arm/setup.c
     @@ -852,7 +852,8 @@ void __init start_xen(unsigned long 
boot_phys_offset,
          else
          {
              printk("Booting using ACPI\n");
     -        device_tree_flattened = NULL;
     +        device_tree_flattened = relocate_fdt(fdt_paddr, fdt_size);
     +        dt_unflatten_host_device_tree();
          }

          init_IRQ();

Best Regards,
Wei
Julien Grall Jan. 7, 2020, 9:10 a.m. UTC | #5
On 07/01/2020 08:39, Wei Xu wrote:
> Hi Stefano,
> 
> On 2020/1/7 6:01, Stefano Stabellini wrote:
>> On Sat, 28 Dec 2019, Wei Xu wrote:
>>> Hi Julien,
>>>
>>> On 2019/12/28 16:09, Julien Grall wrote:
>>>> Hi,
>>>>
>>>> On 28/12/2019 03:08, Wei Xu wrote:
>>>>> This patch fixes the typo about the active status range of an IRQ
>>>>> via GICD. Otherwise it will be failed to handle the mmio access and
>>>>> inject a data abort.
>>>> I have seen a patch similar from NXP a month ago and I disagreed on the
>>>> approach.
>>>>
>>>> If you look at the context you modifed, it says that reading ACTIVER 
>>>> is not
>>>> supported. While I agree the behavior is not consistent accross 
>>>> ACTIVER,
>>>> injecting a data abort is a perfectly fine behavior to me (though 
>>>> not spec
>>>> compliant) as we don't implement the registers correctly.
>>>>
>>>> I guess you are sending this patch, because you tried Linux 5.4 (or 
>>>> later)
>>>> on Xen, right? Linux has recently began to read ACTIVER to check 
>>>> whether an
>>>> IRQ is active at the HW level during the synchronizing of the IRQS. 
>>>> From my
>>>> understanding, this is used because there is a window where the 
>>>> interrupt is
>>>> active at the HW level but the Linux IRQ subsystem is not aware of it.
>>>>
>>>> While the patch below will allow Linux 5.4 to not crash, it is not 
>>>> going to
>>>> make it fly very far because of the above. So I am rather not happy 
>>>> with
>>>> persuing with returning 0.
>>>>
>>> Yes, I am using Linux 5.5-rc2 :)
>>> Got it and thanks for the explanation.
>>> I am not insistent on this and OK to wait for the update.
>>> Thanks and have a very happy new year!
>> Hi Wei,
>>
>> what do you do to reproduce the issue? Are you just booting Linux
>> 5.5-rc2 as dom0 and seeing the issue during boot, or are you doing
>> something specific?
>>
>> .
>>
> 
> I directly tested the mainline kernel with defconfig.
> And the 5.5-rc5 kernel booting log is as below:
> 
>      root@ubuntu:~# dmesg | more
>      [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010]
>      [    0.000000] Linux version 5.5.0-rc5 (joyx@Turing-Arch-b) (gcc 
> version 4.9.1 2
>      0140505 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.05 - 
> Linaro GCC 4.9-20
>      14.05)) #132 SMP PREEMPT Tue Jan 7 15:43:06 CST 2020
>      [    0.000000] Xen XEN_VERSION.XEN_SUBVERSION support found
>      [    0.000000] efi: Getting EFI parameters from FDT:
>      [    0.000000] efi: EFI v2.50 by Xen
>      [    0.000000] efi:  ACPI 2.0=0x181d0e70
>      [    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
>      [    0.000000] ACPI: Early table checksum verification disabled
>      [    0.000000] ACPI: RSDP 0x00000000181D0E70 000024 (v02 HISI  )
>      [    0.000000] ACPI: XSDT 0x00000000181D0DB0 0000BC (v01 HISI 
> HIP08    0000000
>      0      01000013)

Is that the full log from Linux? If not, can you post it in full?

> 
> But to boot with ACPI on our hardware, except above change I have also 
> done some hacking based on
> XEN 4.13 as below:

I haven't booted Xen on any ACPI systems recently so there might be bugs 
in the code. Your changes below is definitely a call to look more into 
details what's wrong.

> 
>      diff --git a/xen/arch/arm/traps.c b/xen/arch/arm/traps.c
>      index d028ec9..215a291 100644
>      --- a/xen/arch/arm/traps.c
>      +++ b/xen/arch/arm/traps.c
>      @@ -1856,8 +1856,8 @@ static bool try_map_mmio(gfn_t gfn)
>               return false;
> 
>           /* The hardware domain can only map permitted MMIO regions */
>      -    if ( !iomem_access_permitted(d, mfn_x(mfn), mfn_x(mfn) + 1) )
>      -        return false;
>      +    /* if ( !iomem_access_permitted(d, mfn_x(mfn), mfn_x(mfn) + 1) 
> ) */
>      +    /*     return false; */

Dom0 should be able to map nearly all the address space through this 
function. The only thing not allowed is the GIC and UART (see 
acpi_iomem_deny_access).

So why do you want this change? What sort of address Dom0 is trying to 
map and fail?

> 
>           return !map_regions_p2mt(d, gfn, 1, mfn, p2m_mmio_direct_c);
>       }
> 
> 
>      diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
>      index 4d6c971..c626f9e 100644
>      --- a/xen/arch/arm/mm.c
>      +++ b/xen/arch/arm/mm.c
>      @@ -1095,7 +1095,7 @@ static bool xen_pt_check_entry(lpae_t entry, 
> mfn_t mfn, unsigned int flags)
>               {
>                   mm_printk("Changing MFN for a valid entry is not 
> allowed (%#"PRI_mfn" -> %#"PRI_mfn").\n",
>                             mfn_x(lpae_get_mfn(entry)), mfn_x(mfn));
>      -            return false;
>      +            return true;

There is a pretty good reason to prevent modifying the MFN on a valid 
entry. Indeed, the PT code is not handling of the Break-Before-Make 
sequence (requires when updating certain entry) as this is a can of worms.

However, during my testing I never found a place where an valid entry is 
modified (other than the permissions part). So can you give more details 
how you came up here?

>               }
>           }
>           /* Sanity check when removing a page. */
> 
> 
>      diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
>      index 3c899cd..1e83351 100644
>      --- a/xen/arch/arm/setup.c
>      +++ b/xen/arch/arm/setup.c
>      @@ -852,7 +852,8 @@ void __init start_xen(unsigned long 
> boot_phys_offset,
>           else
>           {
>               printk("Booting using ACPI\n");
>      -        device_tree_flattened = NULL;
>      +        device_tree_flattened = relocate_fdt(fdt_paddr, fdt_size);
>      +        dt_unflatten_host_device_tree();

When using ACPI, the DT should not be used. So why do you need this?

Cheers,
Wei Xu Jan. 7, 2020, 9:28 a.m. UTC | #6
Hi Julien,

On 2020/1/7 17:10, Julien Grall wrote:
>
>
> On 07/01/2020 08:39, Wei Xu wrote:
>> Hi Stefano,
>>
>> On 2020/1/7 6:01, Stefano Stabellini wrote:
>>> On Sat, 28 Dec 2019, Wei Xu wrote:
>>>> Hi Julien,
>>>>
>>>> On 2019/12/28 16:09, Julien Grall wrote:
>>>>> Hi,
>>>>>
>>>>> On 28/12/2019 03:08, Wei Xu wrote:
>>>>>> This patch fixes the typo about the active status range of an IRQ
>>>>>> via GICD. Otherwise it will be failed to handle the mmio access and
>>>>>> inject a data abort.
>>>>> I have seen a patch similar from NXP a month ago and I disagreed 
>>>>> on the
>>>>> approach.
>>>>>
>>>>> If you look at the context you modifed, it says that reading 
>>>>> ACTIVER is not
>>>>> supported. While I agree the behavior is not consistent accross 
>>>>> ACTIVER,
>>>>> injecting a data abort is a perfectly fine behavior to me (though 
>>>>> not spec
>>>>> compliant) as we don't implement the registers correctly.
>>>>>
>>>>> I guess you are sending this patch, because you tried Linux 5.4 
>>>>> (or later)
>>>>> on Xen, right? Linux has recently began to read ACTIVER to check 
>>>>> whether an
>>>>> IRQ is active at the HW level during the synchronizing of the 
>>>>> IRQS. From my
>>>>> understanding, this is used because there is a window where the 
>>>>> interrupt is
>>>>> active at the HW level but the Linux IRQ subsystem is not aware of 
>>>>> it.
>>>>>
>>>>> While the patch below will allow Linux 5.4 to not crash, it is not 
>>>>> going to
>>>>> make it fly very far because of the above. So I am rather not 
>>>>> happy with
>>>>> persuing with returning 0.
>>>>>
>>>> Yes, I am using Linux 5.5-rc2 :)
>>>> Got it and thanks for the explanation.
>>>> I am not insistent on this and OK to wait for the update.
>>>> Thanks and have a very happy new year!
>>> Hi Wei,
>>>
>>> what do you do to reproduce the issue? Are you just booting Linux
>>> 5.5-rc2 as dom0 and seeing the issue during boot, or are you doing
>>> something specific?
>>>
>>> .
>>>
>>
>> I directly tested the mainline kernel with defconfig.
>> And the 5.5-rc5 kernel booting log is as below:
>>
>>      root@ubuntu:~# dmesg | more
>>      [    0.000000] Booting Linux on physical CPU 0x0000000000 
>> [0x481fd010]
>>      [    0.000000] Linux version 5.5.0-rc5 (joyx@Turing-Arch-b) (gcc 
>> version 4.9.1 2
>>      0140505 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.05 - 
>> Linaro GCC 4.9-20
>>      14.05)) #132 SMP PREEMPT Tue Jan 7 15:43:06 CST 2020
>>      [    0.000000] Xen XEN_VERSION.XEN_SUBVERSION support found
>>      [    0.000000] efi: Getting EFI parameters from FDT:
>>      [    0.000000] efi: EFI v2.50 by Xen
>>      [    0.000000] efi:  ACPI 2.0=0x181d0e70
>>      [    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
>>      [    0.000000] ACPI: Early table checksum verification disabled
>>      [    0.000000] ACPI: RSDP 0x00000000181D0E70 000024 (v02 HISI  )
>>      [    0.000000] ACPI: XSDT 0x00000000181D0DB0 0000BC (v01 HISI 
>> HIP08    0000000
>>      0      01000013)
>
> Is that the full log from Linux? If not, can you post it in full?

I will reply the other questions in another mail since the below log is 
too big.

Best regards,
Wei

---

IPMI ExitBootService Event
POST done.
- UART enabled -
- Boot CPU booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) Checking for initrd in /chosen
(XEN) RAM: 0000000000000000 - 0000000010130fff
(XEN) RAM: 0000000012a00000 - 0000000016256fff
(XEN) RAM: 0000000017b5a000 - 0000000017c59fff
(XEN) RAM: 0000000017c5a000 - 00000000181cdfff
(XEN) RAM: 000000001849d000 - 000000001850ffff
(XEN) RAM: 0000000018520000 - 0000000018523fff
(XEN) RAM: 0000000018524000 - 0000000018524fff
(XEN) RAM: 0000000018526000 - 0000000018526fff
(XEN) RAM: 0000000018527000 - 0000000018528fff
(XEN) RAM: 0000000018529000 - 000000001852ffff
(XEN) RAM: 0000000018560000 - 000000001a324fff
(XEN) RAM: 000000001a325000 - 000000001a326fff
(XEN) RAM: 000000001a327000 - 000000001a549fff
(XEN) RAM: 000000001a54a000 - 000000001a54dfff
(XEN) RAM: 000000001a54e000 - 000000001a54ffff
(XEN) RAM: 000000001a550000 - 000000001a557fff
(XEN) RAM: 000000001a558000 - 000000001a558fff
(XEN) RAM: 000000001a559000 - 000000001a610fff
(XEN) RAM: 000000001a629000 - 000000001b8f1fff
(XEN) RAM: 000000001b8f2000 - 000000001b903fff
(XEN) RAM: 000000001b904000 - 00000000310a8fff
(XEN) RAM: 00000000310a9000 - 00000000315dafff
(XEN) RAM: 00000000315db000 - 00000000395dbfff
(XEN) RAM: 00000000395dc000 - 000000003961ffff
(XEN) RAM: 0000000039690000 - 0000000039692fff
(XEN) RAM: 0000000039693000 - 00000000396affff
(XEN) RAM: 0000000039750000 - 0000000039751fff
(XEN) RAM: 0000000039752000 - 00000000397affff
(XEN) RAM: 0000000039a10000 - 0000000039a4ffff
(XEN) RAM: 0000000039af0000 - 0000000039af0fff
(XEN) RAM: 0000000039af1000 - 0000000039b1ffff
(XEN) RAM: 0000000039c60000 - 0000000039d0ffff
(XEN) RAM: 0000000039d32000 - 0000000039d33fff
(XEN) RAM: 0000000039d34000 - 0000000039d3ffff
(XEN) RAM: 0000000039d41000 - 0000000039d41fff
(XEN) RAM: 0000000039d42000 - 0000000039d4ffff
(XEN) RAM: 0000000039d52000 - 0000000039d53fff
(XEN) RAM: 0000000039d54000 - 0000000039d5ffff
(XEN) RAM: 0000000039d72000 - 0000000039d72fff
(XEN) RAM: 0000000039d73000 - 0000000039d7ffff
(XEN) RAM: 0000000039d91000 - 0000000039d9ffff
(XEN) RAM: 000000003a0f0000 - 000000003a0f0fff
(XEN) RAM: 000000003a0f1000 - 000000003a0fafff
(XEN) RAM: 000000003a0fc000 - 000000003a10ffff
(XEN) RAM: 000000003a110000 - 000000003ef2ffff
(XEN) RAM: 000000003ef30000 - 000000003ef30fff
(XEN) RAM: 000000003ef31000 - 000000003f0bffff
(XEN) RAM: 000000003f0c0000 - 000000003f0dffff
(XEN) RAM: 000000003f110000 - 000000003f120fff
(XEN) RAM: 000000003f121000 - 000000003f141fff
(XEN) RAM: 000000003f142000 - 000000003f195fff
(XEN) RAM: 000000003f196000 - 000000003fbcbfff
(XEN) RAM: 000000003fbcc000 - 000000003fbf7fff
(XEN) RAM: 000000003fbf8000 - 000000003fbfffff
(XEN) RAM: 0000000050000000 - 000000007fffffff
(XEN) RAM: 0000002080000000 - 00000027ffffffff
(XEN) RAM: 0000202000000000 - 000020279bffffff
(XEN)
(XEN) MODULE[0]: 00000000181ce000 - 00000000183138f0 Xen
(XEN) MODULE[1]: 000000001a613000 - 000000001a61e000 Device Tree
(XEN) MODULE[2]: 0000000016257000 - 0000000017b58200 Kernel
(XEN)
(XEN) CMDLINE[0000000016257000]:chosen rdinit=/init acpi=force noinitrd 
root=/dev/sdb1 rw
(XEN)
(XEN) Command line: dom0_mem=4G acpi=force loglvl=all guest_loglvl=all
(XEN) PFN compression on bits 26...32
(XEN) ACPI: RSDP 39DE0000, 0024 (r2 HISI  )
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39de0 
-> 0x39dd0).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffbc0
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000000047  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039dd0 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffbc0
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffbc0:
(XEN)    00000000002ffc90 0000000000262ce0 0000000000402000 0000000000001000
(XEN)    0000000039dd0000 0000000000000024 00000000002e0078 0000000000000000
(XEN)    ffffffffffffffff 00000000002e1078 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 1f3171271f33312f 00000000002ffd00 0000000000018306
(XEN)    0000000000402000 0000000000000001 00000000002ffce0 00000000002ffce0
(XEN)    0000000000000000 0000000200000002 00000000002ffca0 000000000027e72c
(XEN)    00000000002ffce0 0000000000248f18 0000000000402000 0000000000000001
(XEN)    0000000039dd0000 0000000000000000 00000000002e0078 00000000002b44b8
(XEN)    00000000002ffd10 00000000002befec 0000000000402000 0000000000000000
(XEN)    00000000002ffd10 00000000002befe0 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002befec>] acpi_tb_parse_root_table+0x70/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39dd0 
-> 0x39dd0).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffbc0
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 000000000000011f  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039dd0 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffbc0
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffbc0:
(XEN)    00000000002ffc90 0000000000262ce0 00000000000000b4 0000000000001000
(XEN)    0000000039dd0000 00000000000000b4 00000000002e0078 0000000000000000
(XEN)    ffffffffffffffff 00000000002e1078 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 1f3171271f33312f 00000000002ffd00 0000000000018306
(XEN)    0000000000402000 0000000000000001 00000000002ffce0 0040000039dd0f7f
(XEN)    0000000000000000 0000000200000002 00000000002ffca0 000000000027e72c
(XEN)    00000000002ffce0 0000000000248f18 00000000000000b4 0000000000000001
(XEN)    0000000039dd0000 0000000000000000 00000000002e0078 00000000002b44b8
(XEN)    00000000002ffd10 00000000002bf030 00000000000000b4 0000000000000000
(XEN)    00000000002ffd10 00000000002bf018 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002bf030>] acpi_tb_parse_root_table+0xb4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39dd0 
-> 0x39dd0).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffbc0
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 00000000000001f7  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039dd0 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffbc0
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffbc0:
(XEN)    00000000002ffc90 0000000000262ce0 00000000000000b4 0000000000001000
(XEN)    0000000039dd0000 0000000000000024 00000000002e0078 0000000000000000
(XEN)    ffffffffffffffff 00000000002e1078 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 1f3171271f33312f 00000000002ffd00 0000000000018306
(XEN)    0000000000402000 0000000000000001 00000000002ffce0 0040000039dd0f7f
(XEN)    0000000000000000 0000000200000002 00000000002ffca0 000000000027e72c
(XEN)    00000000002ffce0 0000000000248f18 00000000000000b4 0000000000000001
(XEN)    0000000039dd0000 0000000000000008 00000000002e0078 00000000002b44b8
(XEN)    00000000002ffd10 00000000002bf0ac 00000000000000b4 0000000000000000
(XEN)    00000000002ffd10 00000000002bf2ac 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002bf0ac>] acpi_tb_parse_root_table+0x130/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: XSDT 39DD0000, 00B4 (r1 HISI   HIP08           0 1000013)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39dd0 
-> 0x39dd0).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffbc0
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 00000000000002d2  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039dd0 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffbc0
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffbc0:
(XEN)    00000000002ffc90 0000000000262ce0 0000000000402000 0000000000001000
(XEN)    0000000039dd0000 00000000000000b4 00000000002e0078 0000000000000000
(XEN)    00000000000000b4 00000000002e1078 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 301f1f1f1f1f1f1f 00000000002ffd00 0000000000018306
(XEN)    0000000000402000 0000000000000001 00000000002ffce0 00000000002ffce0
(XEN)    0000000000000000 0000000200000002 00000000002ffca0 000000000027e72c
(XEN)    00000000002ffce0 0000000000248f18 0000000000402000 0000000000000001
(XEN)    0000000039dd0000 0000000000000008 00000000002e0078 00000000000000b4
(XEN)    00000000002ffd10 00000000002bf110 0000000000402000 0000000001000013
(XEN)    00000000002ffd10 00000000002bf0d4 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002bf110>] acpi_tb_parse_root_table+0x194/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39dd0 
-> 0x39920).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 00000000000003aa  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039920 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 0000000000000002 0000000000001000
(XEN)    0000000039920000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 00000007000000b4 0000000000000001 0000000000000000
(XEN)    0000000000000000 00000000002e1078 000020279c000000 0000000000018306
(XEN)    0000000000000007 0000000000000001 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 0000000000000002 0000000039920000
(XEN)    0000000000000002 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 0000000000000002 0000000000000001
(XEN)    0000000039dd0000 0000000000000008 00000000002ffd10 00000000002bf250
(XEN)    0000000000000040 0000000000000001 0000000000000002 0000000000312000
(XEN)    000000000029d458 00000000002bf210 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: FACP 39920000, 0114 (r6 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39920 
-> 0x39920).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb90
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000000490  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039920 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb90
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb90:
(XEN)    00000000002ffc60 0000000000262ce0 000080662fff9040 0000000000001000
(XEN)    0000000039920000 0000000000000114 000000000029d458 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 00000007002d8a70 0000000000000001 2f311f485248471f
(XEN)    0000000000000000 00000000002bee30 000080662fff9040 0000000000018306
(XEN)    00000000002ffca0 0000000000000001 00000000002ffc70 00000000ffffffd8
(XEN)    0000000000000000 0000000200000002 00000000002ffc70 000000000027e72c
(XEN)    00000000002ffcb0 0000000000248f18 000080662fff9040 0000000000000114
(XEN)    0000000000000114 0000000000000001 000000000029d458 0000000000000000
(XEN)    00000000002ffce0 00000000002bf5fc 000080662fff9040 00000000002bef68
(XEN)    00000000002ffd10 00000000002bf250 00000000002ffd10 00000000002bf274
(XEN)    000080662fff9040 0000000000000001 0000000000000002 0000000000312000
(XEN)    00000000002ffd60 00000000002bf88c 0000000000000000 0000000000000080
(XEN)    0000000000000000 0000000000000000 00000000002e0078 00000000002b44b8
(XEN)    ffffffffffffffff 00000000002e1078 00000000002ffd90 00000000002c06e8
(XEN)    000000020279c000 000020279c000000 000020279c000000 00000000002e0410
(XEN)    00000000002ffdc0 00000000002cf250 000000020279c000 0000800000000000
(XEN)    0000000202630000 000000000016c000 00000000002ffde0 00000000002c9a94
(XEN)    000000020279c000 00000000002b15c0 000000003f141790 00000000002001b8
(XEN)    00000000181ce000 0000000017fce000 000000001a613000 0000000000000000
(XEN)    00000000004002f8 000000001827fdb8 0000000000001560 0000000000000001
(XEN)    0000000000000001 000000001827fdb0 0000000000000000 000000000000b000
(XEN)    000000001a613000 0000003900000000 0000000000000000 0000000f86ded000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000300000000
(XEN)    0000000000000000 00000040ffffffff 00000000ffffffff 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002bf5fc>] acpi_tb_parse_fadt+0x38/0xbc
(XEN)    [<00000000002bf274>] acpi_tb_parse_root_table+0x2f8/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39920 
-> 0x39630).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb50
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000000571  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039630 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb50
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb50:
(XEN)    00000000002ffc20 0000000000262ce0 0000000000000000 0000000000001000
(XEN)    0000000039630000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000114 0000000000000001 0000000000000000
(XEN)    0000000000000000 0000000000000012 000020279c000000 0000000000018306
(XEN)    0000000000000007 0000000000000001 0000000000000001 2f311f485248471f
(XEN)    0000000000000000 0000000200000002 00000000002ffc30 000000000027e72c
(XEN)    00000000002ffc70 0000000000248f18 0000000000000000 0000000039630000
(XEN)    0000000000000114 00000000002d1930 0000000000000001 0000000000000000
(XEN)    00000000002ffca0 00000000002beee8 0000000000000000 00000000002bf618
(XEN)    0000000000402000 0000000000000114 00000000002ffce0 00000000002bf644
(XEN)    0000000000402000 0000000000000114 0000000000000114 0000000000000001
(XEN)    000000000029d458 00000000002bf624 00000000002ffd10 00000000002bf274
(XEN)    000080662fff9040 0000000000000001 0000000000000002 0000000000312000
(XEN)    00000000002ffd60 00000000002bf88c 0000000000000000 0000000000000080
(XEN)    0000000000000000 0000000000000000 00000000002e0078 00000000002b44b8
(XEN)    ffffffffffffffff 00000000002e1078 00000000002ffd90 00000000002c06e8
(XEN)    000000020279c000 000020279c000000 000020279c000000 00000000002e0410
(XEN)    00000000002ffdc0 00000000002cf250 000000020279c000 0000800000000000
(XEN)    0000000202630000 000000000016c000 00000000002ffde0 00000000002c9a94
(XEN)    000000020279c000 00000000002b15c0 000000003f141790 00000000002001b8
(XEN)    00000000181ce000 0000000017fce000 000000001a613000 0000000000000000
(XEN)    00000000004002f8 000000001827fdb8 0000000000001560 0000000000000001
(XEN)    0000000000000001 000000001827fdb0 0000000000000000 000000000000b000
(XEN)    000000001a613000 0000003900000000 0000000000000000 0000000f86ded000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000300000000
(XEN)    0000000000000000 00000040ffffffff 00000000ffffffff 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf644>] acpi_tb_parse_fadt+0x80/0xbc
(XEN)    [<00000000002bf274>] acpi_tb_parse_root_table+0x2f8/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: DSDT 39630000, A84D (r2 HISI   HIP08           0 INTL 20181213)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39630 
-> 0x39dc0).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000000660  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039dc0 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 0000000000000003 0000000000001000
(XEN)    0000000039dc0000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 00000007002bee30 0000000000000001 0000000000000001
(XEN)    0000000000000000 00000000002ffc70 00000000002ffc40 0000000000018306
(XEN)    00000000002ffc70 0000000000000001 00000000002ffc40 00000000ffffffd8
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 0000000000000003 0000000039dc0000
(XEN)    0000000000000003 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 0000000000000003 0000000000000114
(XEN)    0000000000000114 0000000000000001 00000000002ffd10 00000000002bf250
(XEN)    0000000000000060 0000000000000001 0000000000000003 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: PCCT 39DC0000, 008A (r1 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39dc0 
-> 0x39db0).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000000746  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039db0 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 0000000000000004 0000000000001000
(XEN)    0000000039db0000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff9060 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 0000000000000004 0000000039db0000
(XEN)    0000000000000004 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 0000000000000004 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    0000000000000080 0000000000000001 0000000000000004 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: SSDT 39DB0000, E56A (r2 HISI   HIP07           0 INTL 20181213)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39db0 
-> 0x39d80).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 000000000000082c  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039d80 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 0000000000000005 0000000000001000
(XEN)    0000000039d80000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f4b534d481f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff9080 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 0000000000000005 0000000039d80000
(XEN)    0000000000000005 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 0000000000000005 0000000020181213
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    00000000000000a0 0000000000000001 0000000000000005 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: BERT 39D80000, 0030 (r1 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39d80 
-> 0x39d60).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000000912  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039d60 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 0000000000000006 0000000000001000
(XEN)    0000000039d60000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff90a0 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 0000000000000006 0000000039d60000
(XEN)    0000000000000006 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 0000000000000006 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    00000000000000c0 0000000000000001 0000000000000006 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: HEST 39D60000, 058C (r1 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39d60 
-> 0x39d20).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 00000000000009f8  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039d20 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 0000000000000007 0000000000001000
(XEN)    0000000039d20000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff90c0 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 0000000000000007 0000000039d20000
(XEN)    0000000000000007 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 0000000000000007 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    00000000000000e0 0000000000000001 0000000000000007 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: ERST 39D20000, 0230 (r1 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39d20 
-> 0x39d10).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000000ade  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039d10 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 0000000000000008 0000000000001000
(XEN)    0000000039d10000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff90e0 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 0000000000000008 0000000039d10000
(XEN)    0000000000000008 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 0000000000000008 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    0000000000000100 0000000000000001 0000000000000008 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: EINJ 39D10000, 0170 (r1 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39d10 
-> 0x39900).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000000bc4  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039900 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 0000000000000009 0000000000001000
(XEN)    0000000039900000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff9100 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 0000000000000009 0000000039900000
(XEN)    0000000000000009 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 0000000000000009 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    0000000000000120 0000000000000001 0000000000000009 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: GTDT 39900000, 0084 (r3 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39900 
-> 0x39680).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000000caa  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039680 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 000000000000000a 0000000000001000
(XEN)    0000000039680000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff9120 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 000000000000000a 0000000039680000
(XEN)    000000000000000a 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 000000000000000a 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    0000000000000140 0000000000000001 000000000000000a 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: MCFG 39680000, 003C (r1 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39680 
-> 0x39670).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000000d90  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039670 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 000000000000000b 0000000000001000
(XEN)    0000000039670000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff9140 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 000000000000000b 0000000039670000
(XEN)    000000000000000b 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 000000000000000b 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    0000000000000160 0000000000000001 000000000000000b 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: SLIT 39670000, 003C (r1 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39670 
-> 0x39660).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000000e76  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039660 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 000000000000000c 0000000000001000
(XEN)    0000000039660000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff9160 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 000000000000000c 0000000039660000
(XEN)    000000000000000c 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 000000000000000c 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    0000000000000180 0000000000000001 000000000000000c 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: SPCR 39660000, 0050 (r2 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39660 
-> 0x39650).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000000f5c  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039650 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 000000000000000d 0000000000001000
(XEN)    0000000039650000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff9180 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 000000000000000d 0000000039650000
(XEN)    000000000000000d 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 000000000000000d 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    00000000000001a0 0000000000000001 000000000000000d 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: SRAT 39650000, 09C0 (r3 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39650 
-> 0x39640).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000001042  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039640 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 000000000000000e 0000000000001000
(XEN)    0000000039640000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff91a0 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 000000000000000e 0000000039640000
(XEN)    000000000000000e 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 000000000000000e 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    00000000000001c0 0000000000000001 000000000000000e 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: APIC 39640000, 286C (r4 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39640 
-> 0x39620).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 0000000000001128  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039620 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 000000000000000f 0000000000001000
(XEN)    0000000039620000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff91c0 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 000000000000000f 0000000039620000
(XEN)    000000000000000f 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 000000000000000f 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    00000000000001e0 0000000000000001 000000000000000f 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: IORT 39620000, 1060 (r0 HISI   HIP08           0 INTL 20181213)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x39620 
-> 0x18540).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 000000000000120e  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000018540 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 0000000000000010 0000000000001000
(XEN)    0000000018540000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f4b534d481f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff91e0 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 0000000000000010 0000000018540000
(XEN)    0000000000000010 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 0000000000000010 0000000020181213
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    0000000000000200 0000000000000001 0000000000000010 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: PPTT 18540000, 37E4 (r2 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x18540 
-> 0x18550).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 00000000000012f4  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000018550 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 0000000000000011 0000000000001000
(XEN)    0000000018550000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff9200 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 0000000000000011 0000000018550000
(XEN)    0000000000000011 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 0000000000000011 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    0000000000000220 0000000000000001 0000000000000011 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: MPAM 18550000, 063C (r1 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x18550 
-> 0x18530).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 00000000000013da  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000018530 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 0000000000000012 0000000000001000
(XEN)    0000000018530000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff9220 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 0000000000000012 0000000018530000
(XEN)    0000000000000012 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 0000000000000012 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    0000000000000240 0000000000000001 0000000000000012 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: SPMI 18530000, 0041 (r5 HISI   HIP08           0 HISI 20151124)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x18530 
-> 0x18510).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffb80
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 00000000000014c0  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000018510 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffb80
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffb80:
(XEN)    00000000002ffc50 0000000000262ce0 0000000000000013 0000000000001000
(XEN)    0000000018510000 0000000000000024 0000000000000001 0000000000000000
(XEN)    0000000000000012 0000000000000012 000020279c000000 00000000002e0410
(XEN)    0000000000000007 0000000700000000 0000000000000001 00000000002d8a70
(XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 0000000000018306
(XEN)    000080662fff9240 0000000000000001 00000000002ffca0 00000000002ffca0
(XEN)    0000000000000000 0000000200000002 00000000002ffc60 000000000027e72c
(XEN)    00000000002ffca0 0000000000248f18 0000000000000013 0000000018510000
(XEN)    0000000000000013 0000000000000000 0000000000000001 0000000000000000
(XEN)    00000000002ffcd0 00000000002beee8 0000000000000013 0000000020151124
(XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 00000000002bf250
(XEN)    0000000000000260 0000000000000001 0000000000000013 0000000000312000
(XEN)    000000000029d458 0000000000312000 00000000002ffd60 00000000002bf88c
(XEN)    0000000000000000 0000000000000080 0000000000000000 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 00000000002e1078
(XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 000020279c000000
(XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 00000000002cf250
(XEN)    000000020279c000 0000800000000000 0000000202630000 000000000016c000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
(XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
(XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
(XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
(XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) ACPI: iBFT 18510000, 0800 (r1 HISI   HIP08 0             0)
(XEN) mm.c:1097: Changing MFN for a valid entry is not allowed (0x18510 
-> 0x39920).
(XEN) Xen WARN at mm.c:1097
(XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
(XEN) CPU:    0
(XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
(XEN) LR:     0000000000262ad0
(XEN) SP:     00000000002ffc00
(XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
(XEN)      X0: 00000000002af5a8  X1: 00000000000015a6  X2: 0000000000000000
(XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 00000000002d8a70
(XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 7f7f7f7f7f7f7f7f
(XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 0101010101010101
(XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 0000000000000030
(XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 00000000002cf2d8
(XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 00000000002a7010
(XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 0000000000000003
(XEN)     X24: 0000000000039920 X25: 0000000000402000 X26: 000000000000002f
(XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 00000000002ffc00
(XEN)
(XEN)   VTCR_EL2: 80000000
(XEN)  VTTBR_EL2: 0000000000000000
(XEN)
(XEN)  SCTLR_EL2: 30cd183d
(XEN)    HCR_EL2: 000000008000003a
(XEN)  TTBR0_EL2: 0000000018306000
(XEN)
(XEN)    ESR_EL2: f2000001
(XEN)  HPFAR_EL2: 0000000000000000
(XEN)    FAR_EL2: 0000000000000000
(XEN)
(XEN) Xen stack trace from sp=00000000002ffc00:
(XEN)    00000000002ffcd0 0000000000262ce0 000080662fff9040 0000000000001000
(XEN)    0000000039920000 0000000000000114 00000000002e0078 0000000000000000
(XEN)    ffffffffffffffff 00000000002e1078 000020279c000000 00000000002e0410
(XEN)    0000000000000007 00000007ffffffd8 0000000000000001 0000000000402000
(XEN)    0000000000000000 0000000000000800 0000000000000001 0000000000018306
(XEN)    0000000000402010 0000000000000001 000000000040201c 0000000000000000
(XEN)    0000000000000000 0000000200000002 00000000002ffce0 000000000027e72c
(XEN)    00000000002ffd20 0000000000248f18 000080662fff9040 00000000002ffdb8
(XEN)    000020279c000000 0000000000000000 00000000002e0078 00000000002b44b8
(XEN)    00000000002ffd50 00000000002bf6b8 000080662fff9040 0000000000000000
(XEN)    00000000002e0078 00000000002b44b8 00000000002ffd70 00000000002bf900
(XEN)    0000000000000040 00000000002c06e8 00000000002ffd90 00000000002c069c
(XEN)    00000000002cee60 00000000002d35a8 00000000002ffdc0 00000000002cf288
(XEN)    0000000000000000 000020279c000000 0000000202630000 0000000000000000
(XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 00000000002b15c0
(XEN)    000000003f141790 00000000002001b8 00000000181ce000 0000000017fce000
(XEN)    000000001a613000 0000000000000000 00000000004002f8 000000001827fdb8
(XEN)    0000000000001560 0000000000000001 0000000000000001 000000001827fdb0
(XEN)    0000000000000000 000000000000b000 000000001a613000 0000003900000000
(XEN)    0000000000000000 0000000f86ded000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000300000000 0000000000000000 00000040ffffffff
(XEN)    00000000ffffffff 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN)    0000000000000000 0000000000000000 0000000000000000 0000000000000000
(XEN) Xen call trace:
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
(XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
(XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
(XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
(XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
(XEN)    [<00000000002bf6b8>] acpi_tb_verify_table+0x38/0x7c
(XEN)    [<00000000002bf900>] acpi_get_table+0x5c/0xb8
(XEN)    [<00000000002c069c>] acpi_table_parse+0x64/0x94
(XEN)    [<00000000002cf288>] acpi_boot_table_init+0x88/0xd8
(XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
(XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
(XEN)
(XEN) Domain heap initialised
(XEN) Booting using ACPI
(XEN) Platform: Generic System
(XEN) Unable to initialize acpi uart: -9
(XEN) Bad console= option 'dtuart'
  Xen 4.13.0-rc
(XEN) Xen version 4.13.0-rc (joyx@) (aarch64-linux-gnu-gcc (crosstool-NG 
linaro-1.13.1-4.9-2014.05 - Linaro GCC 4.9-2014.05) 4.9.1 20140505 
(prerelease)) debug=y  Mon Dec 30 19:29:38 CST 2019
(XEN) Latest ChangeSet: Fri Dec 27 10:53:41 2019 +0800 git:7724aa5
(XEN) build-id: 5b5c7e21eec3bda62cca91b45991d87dac62b5e7
(XEN) Processor: 481fd010: "Unknown", variant: 0x1, part 0xd01, rev 0x0
(XEN) 64-bit Execution:
(XEN)   Processor Features: 0000010011111111 0000000000000000
(XEN)     Exception Levels: EL3:64 EL2:64 EL1:64 EL0:64
(XEN)     Extensions: GICv3-SysReg
(XEN)   Debug Features: 0000000110305408 0000000000000000
(XEN)   Auxiliary Features: 0000000000000000 0000000000000000
(XEN)   Memory Model Features: 0000000000101125 0000000010211122
(XEN)   ISA Features:  0001100010211120 0000000000011001
(XEN) 32-bit Execution: Unsupported
(XEN) Using SMC Calling Convention v1.1
(XEN) Using PSCI v1.1
(XEN) ACPI: GICC (acpi_id[0x0000] address[0x9b000000] MPIDR[0x80000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0001] address[0x9b000000] MPIDR[0x80100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0002] address[0x9b000000] MPIDR[0x80200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0003] address[0x9b000000] MPIDR[0x80300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0004] address[0x9b000000] MPIDR[0x90000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0005] address[0x9b000000] MPIDR[0x90100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0006] address[0x9b000000] MPIDR[0x90200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0007] address[0x9b000000] MPIDR[0x90300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0008] address[0x9b000000] MPIDR[0xa0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0009] address[0x9b000000] MPIDR[0xa0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x000a] address[0x9b000000] MPIDR[0xa0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x000b] address[0x9b000000] MPIDR[0xa0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x000c] address[0x9b000000] MPIDR[0xb0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x000d] address[0x9b000000] MPIDR[0xb0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x000e] address[0x9b000000] MPIDR[0xb0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x000f] address[0x9b000000] MPIDR[0xb0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0010] address[0x9b000000] MPIDR[0xc0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0011] address[0x9b000000] MPIDR[0xc0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0012] address[0x9b000000] MPIDR[0xc0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0013] address[0x9b000000] MPIDR[0xc0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0014] address[0x9b000000] MPIDR[0xd0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0015] address[0x9b000000] MPIDR[0xd0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0016] address[0x9b000000] MPIDR[0xd0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0017] address[0x9b000000] MPIDR[0xd0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0018] address[0x9b000000] MPIDR[0xe0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0019] address[0x9b000000] MPIDR[0xe0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x001a] address[0x9b000000] MPIDR[0xe0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x001b] address[0x9b000000] MPIDR[0xe0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x001c] address[0x9b000000] MPIDR[0xf0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x001d] address[0x9b000000] MPIDR[0xf0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x001e] address[0x9b000000] MPIDR[0xf0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x001f] address[0x9b000000] MPIDR[0xf0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0020] address[0x9b000000] MPIDR[0x180000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0021] address[0x9b000000] MPIDR[0x180100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0022] address[0x9b000000] MPIDR[0x180200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0023] address[0x9b000000] MPIDR[0x180300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0024] address[0x9b000000] MPIDR[0x190000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0025] address[0x9b000000] MPIDR[0x190100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0026] address[0x9b000000] MPIDR[0x190200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0027] address[0x9b000000] MPIDR[0x190300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0028] address[0x9b000000] MPIDR[0x1a0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0029] address[0x9b000000] MPIDR[0x1a0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x002a] address[0x9b000000] MPIDR[0x1a0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x002b] address[0x9b000000] MPIDR[0x1a0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x002c] address[0x9b000000] MPIDR[0x1b0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x002d] address[0x9b000000] MPIDR[0x1b0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x002e] address[0x9b000000] MPIDR[0x1b0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x002f] address[0x9b000000] MPIDR[0x1b0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0030] address[0x9b000000] MPIDR[0x1c0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0031] address[0x9b000000] MPIDR[0x1c0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0032] address[0x9b000000] MPIDR[0x1c0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0033] address[0x9b000000] MPIDR[0x1c0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0034] address[0x9b000000] MPIDR[0x1d0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0035] address[0x9b000000] MPIDR[0x1d0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0036] address[0x9b000000] MPIDR[0x1d0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0037] address[0x9b000000] MPIDR[0x1d0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0038] address[0x9b000000] MPIDR[0x1e0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0039] address[0x9b000000] MPIDR[0x1e0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x003a] address[0x9b000000] MPIDR[0x1e0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x003b] address[0x9b000000] MPIDR[0x1e0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x003c] address[0x9b000000] MPIDR[0x1f0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x003d] address[0x9b000000] MPIDR[0x1f0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x003e] address[0x9b000000] MPIDR[0x1f0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x003f] address[0x9b000000] MPIDR[0x1f0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0040] address[0x9b000000] MPIDR[0x280000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0041] address[0x9b000000] MPIDR[0x280100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0042] address[0x9b000000] MPIDR[0x280200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0043] address[0x9b000000] MPIDR[0x280300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0044] address[0x9b000000] MPIDR[0x290000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0045] address[0x9b000000] MPIDR[0x290100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0046] address[0x9b000000] MPIDR[0x290200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0047] address[0x9b000000] MPIDR[0x290300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0048] address[0x9b000000] MPIDR[0x2a0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0049] address[0x9b000000] MPIDR[0x2a0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x004a] address[0x9b000000] MPIDR[0x2a0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x004b] address[0x9b000000] MPIDR[0x2a0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x004c] address[0x9b000000] MPIDR[0x2b0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x004d] address[0x9b000000] MPIDR[0x2b0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x004e] address[0x9b000000] MPIDR[0x2b0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x004f] address[0x9b000000] MPIDR[0x2b0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0050] address[0x9b000000] MPIDR[0x2c0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0051] address[0x9b000000] MPIDR[0x2c0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0052] address[0x9b000000] MPIDR[0x2c0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0053] address[0x9b000000] MPIDR[0x2c0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0054] address[0x9b000000] MPIDR[0x2d0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0055] address[0x9b000000] MPIDR[0x2d0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0056] address[0x9b000000] MPIDR[0x2d0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0057] address[0x9b000000] MPIDR[0x2d0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0058] address[0x9b000000] MPIDR[0x2e0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0059] address[0x9b000000] MPIDR[0x2e0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x005a] address[0x9b000000] MPIDR[0x2e0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x005b] address[0x9b000000] MPIDR[0x2e0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x005c] address[0x9b000000] MPIDR[0x2f0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x005d] address[0x9b000000] MPIDR[0x2f0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x005e] address[0x9b000000] MPIDR[0x2f0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x005f] address[0x9b000000] MPIDR[0x2f0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0060] address[0x9b000000] MPIDR[0x380000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0061] address[0x9b000000] MPIDR[0x380100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0062] address[0x9b000000] MPIDR[0x380200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0063] address[0x9b000000] MPIDR[0x380300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0064] address[0x9b000000] MPIDR[0x390000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0065] address[0x9b000000] MPIDR[0x390100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0066] address[0x9b000000] MPIDR[0x390200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0067] address[0x9b000000] MPIDR[0x390300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0068] address[0x9b000000] MPIDR[0x3a0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0069] address[0x9b000000] MPIDR[0x3a0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x006a] address[0x9b000000] MPIDR[0x3a0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x006b] address[0x9b000000] MPIDR[0x3a0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x006c] address[0x9b000000] MPIDR[0x3b0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x006d] address[0x9b000000] MPIDR[0x3b0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x006e] address[0x9b000000] MPIDR[0x3b0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x006f] address[0x9b000000] MPIDR[0x3b0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0070] address[0x9b000000] MPIDR[0x3c0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0071] address[0x9b000000] MPIDR[0x3c0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0072] address[0x9b000000] MPIDR[0x3c0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0073] address[0x9b000000] MPIDR[0x3c0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0074] address[0x9b000000] MPIDR[0x3d0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0075] address[0x9b000000] MPIDR[0x3d0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0076] address[0x9b000000] MPIDR[0x3d0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0077] address[0x9b000000] MPIDR[0x3d0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0078] address[0x9b000000] MPIDR[0x3e0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x0079] address[0x9b000000] MPIDR[0x3e0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x007a] address[0x9b000000] MPIDR[0x3e0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x007b] address[0x9b000000] MPIDR[0x3e0300] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x007c] address[0x9b000000] MPIDR[0x3f0000] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x007d] address[0x9b000000] MPIDR[0x3f0100] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x007e] address[0x9b000000] MPIDR[0x3f0200] 
enabled)
(XEN) ACPI: GICC (acpi_id[0x007f] address[0x9b000000] MPIDR[0x3f0300] 
enabled)
(XEN) 128 CPUs enabled, 128 CPUs total
(XEN) SMP: Allowing 128 CPUs
(XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 100000 KHz
(XEN) GICv3 initialization:
(XEN)       gic_dist_addr=0x000000ae000000
(XEN)       gic_maintenance_irq=25
(XEN)       gic_rdist_stride=0
(XEN)       gic_rdist_regions=128
(XEN)       redistributor regions:
(XEN)         - region 0: 0x000000ae100000 - 0x000000ae140000
(XEN)         - region 1: 0x000000ae140000 - 0x000000ae180000
(XEN)         - region 2: 0x000000ae180000 - 0x000000ae1c0000
(XEN)         - region 3: 0x000000ae1c0000 - 0x000000ae200000
(XEN)         - region 4: 0x000000ae200000 - 0x000000ae240000
(XEN)         - region 5: 0x000000ae240000 - 0x000000ae280000
(XEN)         - region 6: 0x000000ae280000 - 0x000000ae2c0000
(XEN)         - region 7: 0x000000ae2c0000 - 0x000000ae300000
(XEN)         - region 8: 0x000000ae300000 - 0x000000ae340000
(XEN)         - region 9: 0x000000ae340000 - 0x000000ae380000
(XEN)         - region 10: 0x000000ae380000 - 0x000000ae3c0000
(XEN)         - region 11: 0x000000ae3c0000 - 0x000000ae400000
(XEN)         - region 12: 0x000000ae400000 - 0x000000ae440000
(XEN)         - region 13: 0x000000ae440000 - 0x000000ae480000
(XEN)         - region 14: 0x000000ae480000 - 0x000000ae4c0000
(XEN)         - region 15: 0x000000ae4c0000 - 0x000000ae500000
(XEN)         - region 16: 0x000000ae500000 - 0x000000ae540000
(XEN)         - region 17: 0x000000ae540000 - 0x000000ae580000
(XEN)         - region 18: 0x000000ae580000 - 0x000000ae5c0000
(XEN)         - region 19: 0x000000ae5c0000 - 0x000000ae600000
(XEN)         - region 20: 0x000000ae600000 - 0x000000ae640000
(XEN)         - region 21: 0x000000ae640000 - 0x000000ae680000
(XEN)         - region 22: 0x000000ae680000 - 0x000000ae6c0000
(XEN)         - region 23: 0x000000ae6c0000 - 0x000000ae700000
(XEN)         - region 24: 0x000000ae700000 - 0x000000ae740000
(XEN)         - region 25: 0x000000ae740000 - 0x000000ae780000
(XEN)         - region 26: 0x000000ae780000 - 0x000000ae7c0000
(XEN)         - region 27: 0x000000ae7c0000 - 0x000000ae800000
(XEN)         - region 28: 0x000000ae800000 - 0x000000ae840000
(XEN)         - region 29: 0x000000ae840000 - 0x000000ae880000
(XEN)         - region 30: 0x000000ae880000 - 0x000000ae8c0000
(XEN)         - region 31: 0x000000ae8c0000 - 0x000000ae900000
(XEN)         - region 32: 0x000000aa100000 - 0x000000aa140000
(XEN)         - region 33: 0x000000aa140000 - 0x000000aa180000
(XEN)         - region 34: 0x000000aa180000 - 0x000000aa1c0000
(XEN)         - region 35: 0x000000aa1c0000 - 0x000000aa200000
(XEN)         - region 36: 0x000000aa200000 - 0x000000aa240000
(XEN)         - region 37: 0x000000aa240000 - 0x000000aa280000
(XEN)         - region 38: 0x000000aa280000 - 0x000000aa2c0000
(XEN)         - region 39: 0x000000aa2c0000 - 0x000000aa300000
(XEN)         - region 40: 0x000000aa300000 - 0x000000aa340000
(XEN)         - region 41: 0x000000aa340000 - 0x000000aa380000
(XEN)         - region 42: 0x000000aa380000 - 0x000000aa3c0000
(XEN)         - region 43: 0x000000aa3c0000 - 0x000000aa400000
(XEN)         - region 44: 0x000000aa400000 - 0x000000aa440000
(XEN)         - region 45: 0x000000aa440000 - 0x000000aa480000
(XEN)         - region 46: 0x000000aa480000 - 0x000000aa4c0000
(XEN)         - region 47: 0x000000aa4c0000 - 0x000000aa500000
(XEN)         - region 48: 0x000000aa500000 - 0x000000aa540000
(XEN)         - region 49: 0x000000aa540000 - 0x000000aa580000
(XEN)         - region 50: 0x000000aa580000 - 0x000000aa5c0000
(XEN)         - region 51: 0x000000aa5c0000 - 0x000000aa600000
(XEN)         - region 52: 0x000000aa600000 - 0x000000aa640000
(XEN)         - region 53: 0x000000aa640000 - 0x000000aa680000
(XEN)         - region 54: 0x000000aa680000 - 0x000000aa6c0000
(XEN)         - region 55: 0x000000aa6c0000 - 0x000000aa700000
(XEN)         - region 56: 0x000000aa700000 - 0x000000aa740000
(XEN)         - region 57: 0x000000aa740000 - 0x000000aa780000
(XEN)         - region 58: 0x000000aa780000 - 0x000000aa7c0000
(XEN)         - region 59: 0x000000aa7c0000 - 0x000000aa800000
(XEN)         - region 60: 0x000000aa800000 - 0x000000aa840000
(XEN)         - region 61: 0x000000aa840000 - 0x000000aa880000
(XEN)         - region 62: 0x000000aa880000 - 0x000000aa8c0000
(XEN)         - region 63: 0x000000aa8c0000 - 0x000000aa900000
(XEN)         - region 64: 0x002000ae100000 - 0x002000ae140000
(XEN)         - region 65: 0x002000ae140000 - 0x002000ae180000
(XEN)         - region 66: 0x002000ae180000 - 0x002000ae1c0000
(XEN)         - region 67: 0x002000ae1c0000 - 0x002000ae200000
(XEN)         - region 68: 0x002000ae200000 - 0x002000ae240000
(XEN)         - region 69: 0x002000ae240000 - 0x002000ae280000
(XEN)         - region 70: 0x002000ae280000 - 0x002000ae2c0000
(XEN)         - region 71: 0x002000ae2c0000 - 0x002000ae300000
(XEN)         - region 72: 0x002000ae300000 - 0x002000ae340000
(XEN)         - region 73: 0x002000ae340000 - 0x002000ae380000
(XEN)         - region 74: 0x002000ae380000 - 0x002000ae3c0000
(XEN)         - region 75: 0x002000ae3c0000 - 0x002000ae400000
(XEN)         - region 76: 0x002000ae400000 - 0x002000ae440000
(XEN)         - region 77: 0x002000ae440000 - 0x002000ae480000
(XEN)         - region 78: 0x002000ae480000 - 0x002000ae4c0000
(XEN)         - region 79: 0x002000ae4c0000 - 0x002000ae500000
(XEN)         - region 80: 0x002000ae500000 - 0x002000ae540000
(XEN)         - region 81: 0x002000ae540000 - 0x002000ae580000
(XEN)         - region 82: 0x002000ae580000 - 0x002000ae5c0000
(XEN)         - region 83: 0x002000ae5c0000 - 0x002000ae600000
(XEN)         - region 84: 0x002000ae600000 - 0x002000ae640000
(XEN)         - region 85: 0x002000ae640000 - 0x002000ae680000
(XEN)         - region 86: 0x002000ae680000 - 0x002000ae6c0000
(XEN)         - region 87: 0x002000ae6c0000 - 0x002000ae700000
(XEN)         - region 88: 0x002000ae700000 - 0x002000ae740000
(XEN)         - region 89: 0x002000ae740000 - 0x002000ae780000
(XEN)         - region 90: 0x002000ae780000 - 0x002000ae7c0000
(XEN)         - region 91: 0x002000ae7c0000 - 0x002000ae800000
(XEN)         - region 92: 0x002000ae800000 - 0x002000ae840000
(XEN)         - region 93: 0x002000ae840000 - 0x002000ae880000
(XEN)         - region 94: 0x002000ae880000 - 0x002000ae8c0000
(XEN)         - region 95: 0x002000ae8c0000 - 0x002000ae900000
(XEN)         - region 96: 0x002000aa100000 - 0x002000aa140000
(XEN)         - region 97: 0x002000aa140000 - 0x002000aa180000
(XEN)         - region 98: 0x002000aa180000 - 0x002000aa1c0000
(XEN)         - region 99: 0x002000aa1c0000 - 0x002000aa200000
(XEN)         - region 100: 0x002000aa200000 - 0x002000aa240000
(XEN)         - region 101: 0x002000aa240000 - 0x002000aa280000
(XEN)         - region 102: 0x002000aa280000 - 0x002000aa2c0000
(XEN)         - region 103: 0x002000aa2c0000 - 0x002000aa300000
(XEN)         - region 104: 0x002000aa300000 - 0x002000aa340000
(XEN)         - region 105: 0x002000aa340000 - 0x002000aa380000
(XEN)         - region 106: 0x002000aa380000 - 0x002000aa3c0000
(XEN)         - region 107: 0x002000aa3c0000 - 0x002000aa400000
(XEN)         - region 108: 0x002000aa400000 - 0x002000aa440000
(XEN)         - region 109: 0x002000aa440000 - 0x002000aa480000
(XEN)         - region 110: 0x002000aa480000 - 0x002000aa4c0000
(XEN)         - region 111: 0x002000aa4c0000 - 0x002000aa500000
(XEN)         - region 112: 0x002000aa500000 - 0x002000aa540000
(XEN)         - region 113: 0x002000aa540000 - 0x002000aa580000
(XEN)         - region 114: 0x002000aa580000 - 0x002000aa5c0000
(XEN)         - region 115: 0x002000aa5c0000 - 0x002000aa600000
(XEN)         - region 116: 0x002000aa600000 - 0x002000aa640000
(XEN)         - region 117: 0x002000aa640000 - 0x002000aa680000
(XEN)         - region 118: 0x002000aa680000 - 0x002000aa6c0000
(XEN)         - region 119: 0x002000aa6c0000 - 0x002000aa700000
(XEN)         - region 120: 0x002000aa700000 - 0x002000aa740000
(XEN)         - region 121: 0x002000aa740000 - 0x002000aa780000
(XEN)         - region 122: 0x002000aa780000 - 0x002000aa7c0000
(XEN)         - region 123: 0x002000aa7c0000 - 0x002000aa800000
(XEN)         - region 124: 0x002000aa800000 - 0x002000aa840000
(XEN)         - region 125: 0x002000aa840000 - 0x002000aa880000
(XEN)         - region 126: 0x002000aa880000 - 0x002000aa8c0000
(XEN)         - region 127: 0x002000aa8c0000 - 0x002000aa900000
(XEN) GICv3 compatible with GICv2 cbase 0x0000009b000000 vbase 
0x0000009b020000
(XEN) GICv3: using at most 57344 LPIs on the host.
(XEN) GICv3: 672 lines, (IID 00031736).
(XEN) GICv3: Found ITS @0x202100000
(XEN) GICv3: Found ITS @0x200202100000
(XEN) GICv3: CPU0: Found redistributor in region 0 @000000004003a000
(XEN) XSM Framework v1.0.0 initialized
(XEN) Initialising XSM SILO mode
(XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2)
(XEN) Initializing Credit2 scheduler
(XEN)  load_precision_shift: 18
(XEN)  load_window_shift: 30
(XEN)  underload_balance_tolerance: 0
(XEN)  overload_balance_tolerance: -3
(XEN)  runqueues arrangement: socket
(XEN)  cap enforcement granularity: 10ms
(XEN) load tracking window length 1073741824 ns
(XEN) Defaulting to alternative key handling; send 'A' to switch to 
normal mode.
(XEN) Allocated console ring of 1024 KiB.
(XEN) CPU0: Guest atomics will try 29 times before pausing the domain
(XEN) Bringing up CPU1
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x0 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x1 Value to [3L]..
- CPU 00080100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU1: Found redistributor in region 1 @000000004007b000
(XEN) CPU1: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 1 booted.
(XEN) Bringing up CPU2
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x0 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x2 Value to [7L]..
- CPU 00080200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU2: Found redistributor in region 2 @00000000400bc000
(XEN) CPU2: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 2 booted.
(XEN) Bringing up CPU3
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x0 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x3 Value to [fL]..
- CPU 00080300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU3: Found redistributor in region 3 @00000000400fd000
(XEN) CPU3: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 3 booted.
(XEN) Bringing up CPU4
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x1 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x0 Value to [10fL]..
- CPU 00090000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU4: Found redistributor in region 4 @000000004013e000
(XEN) CPU4: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 4 booted.
(XEN) Bringing up CPU5
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x1 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x1 Value to [30fL]..
- CPU 00090100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU5: Found redistributor in region 5 @000000004017f000
(XEN) CPU5: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 5 booted.
(XEN) Bringing up CPU6
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x1 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x2 Value to [70fL]..
- CPU 00090200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU6: Found redistributor in region 6 @00000000401c0000
(XEN) CPU6: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 6 booted.
(XEN) Bringing up CPU7
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x1 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x3 Value to [f0fL]..
- CPU 00090300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU7: Found redistributor in region 7 @0000000040201000
(XEN) CPU7: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 7 booted.
(XEN) Bringing up CPU8
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x2 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x0 Value to [10f0fL]..
- CPU 000a0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU8: Found redistributor in region 8 @0000000040242000
(XEN) CPU8: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 8 booted.
(XEN) Bringing up CPU9
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x2 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x1 Value to [30f0fL]..
- CPU 000a0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU9: Found redistributor in region 9 @0000000040283000
(XEN) CPU9: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 9 booted.
(XEN) Bringing up CPU10
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x2 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x2 Value to [70f0fL]..
- CPU 000a0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU10: Found redistributor in region 10 @00000000402c4000
(XEN) CPU10: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 10 booted.
(XEN) Bringing up CPU11
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x2 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x3 Value to [f0f0fL]..
- CPU 000a0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU11: Found redistributor in region 11 @0000000040305000
(XEN) CPU11: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 11 booted.
(XEN) Bringing up CPU12
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x3 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x0 Value to [10f0f0fL]..
- CPU 000b0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU12: Found redistributor in region 12 @0000000040346000
(XEN) CPU12: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 12 booted.
(XEN) Bringing up CPU13
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x3 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x1 Value to [30f0f0fL]..
- CPU 000b0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU13: Found redistributor in region 13 @0000000040387000
(XEN) CPU13: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 13 booted.
(XEN) Bringing up CPU14
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x3 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x2 Value to [70f0f0fL]..
- CPU 000b0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU14: Found redistributor in region 14 @00000000403c8000
(XEN) CPU14: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 14 booted.
(XEN) Bringing up CPU15
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x3 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x3 Value to [f0f0f0fL]..
- CPU 000b0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU15: Found redistributor in region 15 @0000000040409000
(XEN) CPU15: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 15 booted.
(XEN) Bringing up CPU16
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x4 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x0 Value to [1L]..
- CPU 000c0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU16: Found redistributor in region 16 @000000004044a000
(XEN) CPU16: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 16 booted.
(XEN) Bringing up CPU17
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x4 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x1 Value to [3L]..
- CPU 000c0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU17: Found redistributor in region 17 @000000004048b000
(XEN) CPU17: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 17 booted.
(XEN) Bringing up CPU18
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x4 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x2 Value to [7L]..
- CPU 000c0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU18: Found redistributor in region 18 @00000000404cc000
(XEN) CPU18: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 18 booted.
(XEN) Bringing up CPU19
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x4 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x3 Value to [fL]..
- CPU 000c0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU19: Found redistributor in region 19 @000000004050d000
(XEN) CPU19: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 19 booted.
(XEN) Bringing up CPU20
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x5 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x0 Value to [10fL]..
- CPU 000d0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU20: Found redistributor in region 20 @000000004054e000
(XEN) CPU20: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 20 booted.
(XEN) Bringing up CPU21
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x5 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x1 Value to [30fL]..
- CPU 000d0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU21: Found redistributor in region 21 @000000004058f000
(XEN) CPU21: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 21 booted.
(XEN) Bringing up CPU22
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x5 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x2 Value to [70fL]..
- CPU 000d0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU22: Found redistributor in region 22 @00000000405d0000
(XEN) CPU22: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 22 booted.
(XEN) Bringing up CPU23
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x5 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x3 Value to [f0fL]..
- CPU 000d0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU23: Found redistributor in region 23 @0000000040611000
(XEN) CPU23: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 23 booted.
(XEN) Bringing up CPU24
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x6 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x0 Value to [10f0fL]..
- CPU 000e0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU24: Found redistributor in region 24 @0000000040652000
(XEN) CPU24: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 24 booted.
(XEN) Bringing up CPU25
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x6 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x1 Value to [30f0fL]..
- CPU 000e0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU25: Found redistributor in region 25 @0000000040693000
(XEN) CPU25: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 25 booted.
(XEN) Bringing up CPU26
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x6 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x2 Value to [70f0fL]..
- CPU 000e0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU26: Found redistributor in region 26 @00000000406d4000
(XEN) CPU26: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 26 booted.
(XEN) Bringing up CPU27
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x6 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x3 Value to [f0f0fL]..
- CPU 000e0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU27: Found redistributor in region 27 @0000000040715000
(XEN) CPU27: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 27 booted.
(XEN) Bringing up CPU28
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x7 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x0 Value to [10f0f0fL]..
- CPU 000f0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU28: Found redistributor in region 28 @0000000040756000
(XEN) CPU28: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 28 booted.
(XEN) Bringing up CPU29
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x7 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x1 Value to [30f0f0fL]..
- CPU 000f0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU29: Found redistributor in region 29 @0000000040797000
(XEN) CPU29: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 29 booted.
(XEN) Bringing up CPU30
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x7 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x2 Value to [70f0f0fL]..
- CPU 000f0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU30: Found redistributor in region 30 @00000000407d8000
(XEN) CPU30: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 30 booted.
(XEN) Bringing up CPU31
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x7 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x3 Value to [f0f0f0fL]..
- CPU 000f0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU31: Found redistributor in region 31 @0000000040819000
(XEN) CPU31: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 31 booted.
(XEN) Bringing up CPU32
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x0 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x0 Value to [1L]..
- CPU 00180000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU32: Found redistributor in region 32 @000000004085a000
(XEN) CPU32: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 32 booted.
(XEN) Bringing up CPU33
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x0 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x1 Value to [3L]..
- CPU 00180100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU33: Found redistributor in region 33 @000000004089b000
(XEN) CPU33: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 33 booted.
(XEN) Bringing up CPU34
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x0 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x2 Value to [7L]..
- CPU 00180200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU34: Found redistributor in region 34 @00000000408dc000
(XEN) CPU34: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 34 booted.
(XEN) Bringing up CPU35
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x0 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x3 Value to [fL]..
- CPU 00180300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU35: Found redistributor in region 35 @000000004091d000
(XEN) CPU35: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 35 booted.
(XEN) Bringing up CPU36
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x1 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x0 Value to [10fL]..
- CPU 00190000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU36: Found redistributor in region 36 @000000004095e000
(XEN) CPU36: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 36 booted.
(XEN) Bringing up CPU37
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x1 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x1 Value to [30fL]..
- CPU 00190100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU37: Found redistributor in region 37 @000000004099f000
(XEN) CPU37: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 37 booted.
(XEN) Bringing up CPU38
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x1 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x2 Value to [70fL]..
- CPU 00190200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU38: Found redistributor in region 38 @00000000409e0000
(XEN) CPU38: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 38 booted.
(XEN) Bringing up CPU39
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x1 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x3 Value to [f0fL]..
- CPU 00190300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU39: Found redistributor in region 39 @0000000040a21000
(XEN) CPU39: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 39 booted.
(XEN) Bringing up CPU40
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x2 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x0 Value to [10f0fL]..
- CPU 001a0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU40: Found redistributor in region 40 @0000000040a62000
(XEN) CPU40: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 40 booted.
(XEN) Bringing up CPU41
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x2 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x1 Value to [30f0fL]..
- CPU 001a0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU41: Found redistributor in region 41 @0000000040aa3000
(XEN) CPU41: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 41 booted.
(XEN) Bringing up CPU42
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x2 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x2 Value to [70f0fL]..
- CPU 001a0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU42: Found redistributor in region 42 @0000000040ae4000
(XEN) CPU42: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 42 booted.
(XEN) Bringing up CPU43
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x2 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x3 Value to [f0f0fL]..
- CPU 001a0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU43: Found redistributor in region 43 @0000000040b25000
(XEN) CPU43: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 43 booted.
(XEN) Bringing up CPU44
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x3 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x0 Value to [10f0f0fL]..
- CPU 001b0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU44: Found redistributor in region 44 @0000000040b66000
(XEN) CPU44: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 44 booted.
(XEN) Bringing up CPU45
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x3 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x1 Value to [30f0f0fL]..
- CPU 001b0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU45: Found redistributor in region 45 @0000000040ba7000
(XEN) CPU45: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 45 booted.
(XEN) Bringing up CPU46
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x3 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x2 Value to [70f0f0fL]..
- CPU 001b0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU46: Found redistributor in region 46 @0000000040be8000
(XEN) CPU46: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 46 booted.
(XEN) Bringing up CPU47
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x3 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x3 Value to [f0f0f0fL]..
- CPU 001b0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU47: Found redistributor in region 47 @0000000040c29000
(XEN) CPU47: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 47 booted.
(XEN) Bringing up CPU48
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x4 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x0 Value to [1L]..
- CPU 001c0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU48: Found redistributor in region 48 @0000000040c6a000
(XEN) CPU48: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 48 booted.
(XEN) Bringing up CPU49
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x4 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x1 Value to [3L]..
- CPU 001c0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU49: Found redistributor in region 49 @0000000040cab000
(XEN) CPU49: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 49 booted.
(XEN) Bringing up CPU50
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x4 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x2 Value to [7L]..
- CPU 001c0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU50: Found redistributor in region 50 @0000000040cec000
(XEN) CPU50: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 50 booted.
(XEN) Bringing up CPU51
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x4 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x3 Value to [fL]..
- CPU 001c0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU51: Found redistributor in region 51 @0000000040d2d000
(XEN) CPU51: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 51 booted.
(XEN) Bringing up CPU52
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x5 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x0 Value to [10fL]..
- CPU 001d0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU52: Found redistributor in region 52 @0000000040d6e000
(XEN) CPU52: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 52 booted.
(XEN) Bringing up CPU53
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x5 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x1 Value to [30fL]..
- CPU 001d0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU53: Found redistributor in region 53 @0000000040daf000
(XEN) CPU53: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 53 booted.
(XEN) Bringing up CPU54
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x5 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x2 Value to [70fL]..
- CPU 001d0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU54: Found redistributor in region 54 @0000000040df0000
(XEN) CPU54: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 54 booted.
(XEN) Bringing up CPU55
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x5 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x3 Value to [f0fL]..
- CPU 001d0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU55: Found redistributor in region 55 @0000000040e31000
(XEN) CPU55: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 55 booted.
(XEN) Bringing up CPU56
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x6 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x0 Value to [10f0fL]..
- CPU 001e0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU56: Found redistributor in region 56 @0000000040e72000
(XEN) CPU56: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 56 booted.
(XEN) Bringing up CPU57
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x6 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x1 Value to [30f0fL]..
- CPU 001e0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU57: Found redistributor in region 57 @0000000040eb3000
(XEN) CPU57: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 57 booted.
(XEN) Bringing up CPU58
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x6 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x2 Value to [70f0fL]..
- CPU 001e0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU58: Found redistributor in region 58 @0000000040ef4000
(XEN) CPU58: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 58 booted.
(XEN) Bringing up CPU59
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x6 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x3 Value to [f0f0fL]..
- CPU 001e0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU59: Found redistributor in region 59 @0000000040f35000
(XEN) CPU59: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 59 booted.
(XEN) Bringing up CPU60
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x7 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x0 Value to [10f0f0fL]..
- CPU 001f0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU60: Found redistributor in region 60 @0000000040f76000
(XEN) CPU60: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 60 booted.
(XEN) Bringing up CPU61
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x7 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x1 Value to [30f0f0fL]..
- CPU 001f0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU61: Found redistributor in region 61 @0000000040fb7000
(XEN) CPU61: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 61 booted.
(XEN) Bringing up CPU62
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x7 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x2 Value to [70f0f0fL]..
- CPU 001f0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU62: Found redistributor in region 62 @0000000040ff8000
(XEN) CPU62: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 62 booted.
(XEN) Bringing up CPU63
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x7 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x3 Value to [f0f0f0fL]..
- CPU 001f0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU63: Found redistributor in region 63 @0000000041039000
(XEN) CPU63: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 63 booted.
(XEN) Bringing up CPU64
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x0 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x0 Value to [1L]..
- CPU 00280000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU64: Found redistributor in region 64 @000000004107a000
(XEN) CPU64: Guest atomics will try 27 times before pausing the domain
(XEN) CPU 64 booted.
(XEN) Bringing up CPU65
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x0 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x1 Value to [3L]..
- CPU 00280100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU65: Found redistributor in region 65 @00000000410bb000
(XEN) CPU65: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 65 booted.
(XEN) Bringing up CPU66
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x0 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x2 Value to [7L]..
- CPU 00280200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU66: Found redistributor in region 66 @00000000410fc000
(XEN) CPU66: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 66 booted.
(XEN) Bringing up CPU67
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x0 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x3 Value to [fL]..
- CPU 00280300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU67: Found redistributor in region 67 @000000004113d000
(XEN) CPU67: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 67 booted.
(XEN) Bringing up CPU68
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x1 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x0 Value to [10fL]..
- CPU 00290000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU68: Found redistributor in region 68 @000000004117e000
(XEN) CPU68: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 68 booted.
(XEN) Bringing up CPU69
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x1 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x1 Value to [30fL]..
- CPU 00290100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU69: Found redistributor in region 69 @00000000411bf000
(XEN) CPU69: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 69 booted.
(XEN) Bringing up CPU70
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x1 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x2 Value to [70fL]..
- CPU 00290200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU70: Found redistributor in region 70 @0000000041200000
(XEN) CPU70: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 70 booted.
(XEN) Bringing up CPU71
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x1 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x3 Value to [f0fL]..
- CPU 00290300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU71: Found redistributor in region 71 @0000000041241000
(XEN) CPU71: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 71 booted.
(XEN) Bringing up CPU72
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x2 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x0 Value to [10f0fL]..
- CPU 002a0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU72: Found redistributor in region 72 @0000000041282000
(XEN) CPU72: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 72 booted.
(XEN) Bringing up CPU73
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x2 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x1 Value to [30f0fL]..
- CPU 002a0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU73: Found redistributor in region 73 @00000000412c3000
(XEN) CPU73: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 73 booted.
(XEN) Bringing up CPU74
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x2 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x2 Value to [70f0fL]..
- CPU 002a0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU74: Found redistributor in region 74 @0000000041304000
(XEN) CPU74: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 74 booted.
(XEN) Bringing up CPU75
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x2 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x3 Value to [f0f0fL]..
- CPU 002a0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU75: Found redistributor in region 75 @0000000041345000
(XEN) CPU75: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 75 booted.
(XEN) Bringing up CPU76
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x3 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x0 Value to [10f0f0fL]..
- CPU 002b0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU76: Found redistributor in region 76 @0000000041386000
(XEN) CPU76: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 76 booted.
(XEN) Bringing up CPU77
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x3 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x1 Value to [30f0f0fL]..
- CPU 002b0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU77: Found redistributor in region 77 @00000000413c7000
(XEN) CPU77: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 77 booted.
(XEN) Bringing up CPU78
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x3 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x2 Value to [70f0f0fL]..
- CPU 002b0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU78: Found redistributor in region 78 @0000000041408000
(XEN) CPU78: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 78 booted.
(XEN) Bringing up CPU79
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x3 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x3 Value to [f0f0f0fL]..
- CPU 002b0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU79: Found redistributor in region 79 @0000000041449000
(XEN) CPU79: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 79 booted.
(XEN) Bringing up CPU80
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x4 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x0 Value to [1L]..
- CPU 002c0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU80: Found redistributor in region 80 @000000004148a000
(XEN) CPU80: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 80 booted.
(XEN) Bringing up CPU81
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x4 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x1 Value to [3L]..
- CPU 002c0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU81: Found redistributor in region 81 @00000000414cb000
(XEN) CPU81: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 81 booted.
(XEN) Bringing up CPU82
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x4 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x2 Value to [7L]..
- CPU 002c0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU82: Found redistributor in region 82 @000000004150c000
(XEN) CPU82: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 82 booted.
(XEN) Bringing up CPU83
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x4 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x3 Value to [fL]..
- CPU 002c0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU83: Found redistributor in region 83 @000000004154d000
(XEN) CPU83: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 83 booted.
(XEN) Bringing up CPU84
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x5 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x0 Value to [10fL]..
- CPU 002d0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU84: Found redistributor in region 84 @000000004158e000
(XEN) CPU84: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 84 booted.
(XEN) Bringing up CPU85
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x5 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x1 Value to [30fL]..
- CPU 002d0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU85: Found redistributor in region 85 @00000000415cf000
(XEN) CPU85: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 85 booted.
(XEN) Bringing up CPU86
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x5 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x2 Value to [70fL]..
- CPU 002d0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU86: Found redistributor in region 86 @0000000041610000
(XEN) CPU86: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 86 booted.
(XEN) Bringing up CPU87
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x5 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x3 Value to [f0fL]..
- CPU 002d0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU87: Found redistributor in region 87 @0000000041651000
(XEN) CPU87: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 87 booted.
(XEN) Bringing up CPU88
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x6 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x0 Value to [10f0fL]..
- CPU 002e0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU88: Found redistributor in region 88 @0000000041692000
(XEN) CPU88: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 88 booted.
(XEN) Bringing up CPU89
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x6 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x1 Value to [30f0fL]..
- CPU 002e0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU89: Found redistributor in region 89 @00000000416d3000
(XEN) CPU89: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 89 booted.
(XEN) Bringing up CPU90
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x6 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x2 Value to [70f0fL]..
- CPU 002e0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU90: Found redistributor in region 90 @0000000041714000
(XEN) CPU90: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 90 booted.
(XEN) Bringing up CPU91
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x6 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x3 Value to [f0f0fL]..
- CPU 002e0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU91: Found redistributor in region 91 @0000000041755000
(XEN) CPU91: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 91 booted.
(XEN) Bringing up CPU92
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x7 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x0 Value to [10f0f0fL]..
- CPU 002f0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU92: Found redistributor in region 92 @0000000041796000
(XEN) CPU92: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 92 booted.
(XEN) Bringing up CPU93
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x7 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x1 Value to [30f0f0fL]..
- CPU 002f0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU93: Found redistributor in region 93 @00000000417d7000
(XEN) CPU93: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 93 booted.
(XEN) Bringing up CPU94
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x7 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x2 Value to [70f0f0fL]..
- CPU 002f0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU94: Found redistributor in region 94 @0000000041818000
(XEN) CPU94: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 94 booted.
(XEN) Bringing up CPU95
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x7 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x3 Value to [f0f0f0fL]..
- CPU 002f0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU95: Found redistributor in region 95 @0000000041859000
(XEN) CPU95: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 95 booted.
(XEN) Bringing up CPU96
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x0 domain_bit 
= 0x0
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x0 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x0 Value to [1L]..
- CPU 00380000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU96: Found redistributor in region 96 @000000004189a000
(XEN) CPU96: Guest atomics will try 27 times before pausing the domain
(XEN) CPU 96 booted.
(XEN) Bringing up CPU97
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x0 domain_bit 
= 0x1
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x0 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x1 Value to [3L]..
- CPU 00380100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU97: Found redistributor in region 97 @00000000418db000
(XEN) CPU97: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 97 booted.
(XEN) Bringing up CPU98
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x0 domain_bit 
= 0x2
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x0 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x2 Value to [7L]..
- CPU 00380200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU98: Found redistributor in region 98 @000000004191c000
(XEN) CPU98: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 98 booted.
(XEN) Bringing up CPU99
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x0 domain_bit 
= 0x3
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x0 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x0 ClustIdx = 0x0 domain_bit = 
0x3 Value to [fL]..
- CPU 00380300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU99: Found redistributor in region 99 @000000004195d000
(XEN) CPU99: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 99 booted.
(XEN) Bringing up CPU100
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x1 domain_bit 
= 0x0
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x1 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x0 Value to [10fL]..
- CPU 00390000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU100: Found redistributor in region 100 @000000004199e000
(XEN) CPU100: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 100 booted.
(XEN) Bringing up CPU101
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x1 domain_bit 
= 0x1
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x1 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x1 Value to [30fL]..
- CPU 00390100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU101: Found redistributor in region 101 @00000000419df000
(XEN) CPU101: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 101 booted.
(XEN) Bringing up CPU102
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x1 domain_bit 
= 0x2
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x1 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x2 Value to [70fL]..
- CPU 00390200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU102: Found redistributor in region 102 @0000000041a20000
(XEN) CPU102: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 102 booted.
(XEN) Bringing up CPU103
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x1 domain_bit 
= 0x3
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x1 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x1 ClustIdx = 0x0 domain_bit = 
0x3 Value to [f0fL]..
- CPU 00390300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU103: Found redistributor in region 103 @0000000041a61000
(XEN) CPU103: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 103 booted.
(XEN) Bringing up CPU104
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x2 domain_bit 
= 0x0
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x2 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x0 Value to [10f0fL]..
- CPU 003a0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU104: Found redistributor in region 104 @0000000041aa2000
(XEN) CPU104: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 104 booted.
(XEN) Bringing up CPU105
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x2 domain_bit 
= 0x1
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x2 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x1 Value to [30f0fL]..
- CPU 003a0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU105: Found redistributor in region 105 @0000000041ae3000
(XEN) CPU105: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 105 booted.
(XEN) Bringing up CPU106
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x2 domain_bit 
= 0x2
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x2 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x2 Value to [70f0fL]..
- CPU 003a0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU106: Found redistributor in region 106 @0000000041b24000
(XEN) CPU106: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 106 booted.
(XEN) Bringing up CPU107
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x2 domain_bit 
= 0x3
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x2 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x2 ClustIdx = 0x0 domain_bit = 
0x3 Value to [f0f0fL]..
- CPU 003a0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU107: Found redistributor in region 107 @0000000041b65000
(XEN) CPU107: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 107 booted.
(XEN) Bringing up CPU108
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x3 domain_bit 
= 0x0
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x3 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x0 Value to [10f0f0fL]..
- CPU 003b0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU108: Found redistributor in region 108 @0000000041ba6000
(XEN) CPU108: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 108 booted.
(XEN) Bringing up CPU109
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x3 domain_bit 
= 0x1
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x3 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x1 Value to [30f0f0fL]..
- CPU 003b0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU109: Found redistributor in region 109 @0000000041be7000
(XEN) CPU109: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 109 booted.
(XEN) Bringing up CPU110
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x3 domain_bit 
= 0x2
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x3 domain_bit = 0 Found 
redistributor in region 110 @0000000041c28000
(XEN) CPU110: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 110 booted.
x2 Value to [dd7f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x2 Value to [70f0f0fL]..
- CPU 003b0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU110:(XEN) Bringing up CPU111
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x3 domain_bit 
= 0x3
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x3 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x3 ClustIdx = 0x0 domain_bit = 
0x3 Value to [f0f0f0fL]..
- CPU 003b0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU111: Found redistributor in region 111 @0000000041c69000
(XEN) CPU111: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 111 booted.
(XEN) Bringing up CPU112
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x4 domain_bit 
= 0x0
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x4 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x0 Value to [1L]..
- CPU 003c0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU112: Found redistributor in region 112 @0000000041caa000
(XEN) CPU112: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 112 booted.
(XEN) Bringing up CPU113
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x4 domain_bit 
= 0x1
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x4 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x1 Value to [3L]..
- CPU 003c0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU113: Found redistributor in region 113 @0000000041ceb000
(XEN) CPU113: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 113 booted.
(XEN) Bringing up CPU114
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x4 domain_bit 
= 0x2
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x4 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x2 Value to [7L]..
- CPU 003c0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU114: Found redistributor in region 114 @0000000041d2c000
(XEN) CPU114: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 114 booted.
(XEN) Bringing up CPU115
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x4 domain_bit 
= 0x3
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x4 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x4 ClustIdx = 0x1 domain_bit = 
0x3 Value to [fL]..
- CPU 003c0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU115: Found redistributor in region 115 @0000000041d6d000
(XEN) CPU115: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 115 booted.
(XEN) Bringing up CPU116
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x5 domain_bit 
= 0x0
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x5 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x0 Value to [10fL]..
- CPU 003d0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU116: Found redistributor in region 116 @0000000041dae000
(XEN) CPU116: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 116 booted.
(XEN) Bringing up CPU117
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x5 domain_bit 
= 0x1
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x5 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x1 Value to [30fL]..
- CPU 003d0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU117: Found redistributor in region 117 @0000000041def000
(XEN) CPU117: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 117 booted.
(XEN) Bringing up CPU118
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x5 domain_bit 
= 0x2
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x5 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x2 Value to [70fL]..
- CPU 003d0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU118: Found redistributor in region 118 @0000000041e30000
(XEN) CPU118: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 118 booted.
(XEN) Bringing up CPU119
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x5 domain_bit 
= 0x3
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x5 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x5 ClustIdx = 0x1 domain_bit = 
0x3 Value to [f0fL]..
- CPU 003d0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU119: Found redistributor in region 119 @0000000041e71000
(XEN) CPU119: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 119 booted.
set_css_power_state]:[299L] ulpos_mpidr = 0x6   domain_bit = 0x0
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x6 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x0 Value to [10f0fL]..
- CPU 003e0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU120: Found redistributor in region 120 @0000000041eb2000
(XEN) CPU120: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 120 booted.
(XEN) Bringing up CPU121
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x6 domain_bit 
= 0x1
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x6 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x1 Value to [30f0fL]..
- CPU 003e0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU121: Found redistributor in region 121 @0000000041ef3000
(XEN) CPU121: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 121 booted.
(XEN) Bringing up CPU122
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x6 domain_bit 
= 0x2
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x6 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x2 Value to [70f0fL]..
- CPU 003e0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU122: Found redistributor in region 122 @0000000041f34000
(XEN) CPU122: Guest atomics will try 29 times before pausing the domain
(XEN) CPU 122 booted.
(XEN) Bringing up CPU123
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x6 domain_bit 
= 0x3
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x6 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x6 ClustIdx = 0x1 domain_bit = 
0x3 Value to [f0f0fL]..
- CPU 003e0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU123: Found redistributor in region 123 @0000000041f75000
(XEN) CPU123: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 123 booted.
(XEN) Bringing up CPU124
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x7 domain_bit 
= 0x0
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x0
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x7 domain_bit = 0x0 Value to 
[dd1f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x0 Value to [10f0f0fL]..
- CPU 003f0000 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU124: Found redistributor in region 124 @0000000041fb6000
(XEN) CPU124: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 124 booted.
(XEN) Bringing up CPU125
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x7 domain_bit 
= 0x1
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x1
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x7 domain_bit = 0x1 Value to 
[dd3f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x1 Value to [30f0f0fL]..
- CPU 003f0100 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU125: Found redistributor in region 125 @0000000041ff7000
(XEN) CPU125: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 125 booted.
(XEN) Bringing up CPU126
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x7 domain_bit 
= 0x2
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x2
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x7 domain_bit = 0x2 Value to 
[dd7f973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x2 Value to [70f0f0fL]..
- CPU 003f0200 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU126: Found redistributor in region 126 @0000000042038000
(XEN) CPU126: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 126 booted.
(XEN) Bringing up CPU127
NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot Address to 
3fc00000
NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x7 domain_bit 
= 0x3
NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 domain_bit 
= 0x3
NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x7 domain_bit = 0x3 Value to 
[ddff973dL]..
NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x7 ClustIdx = 0x1 domain_bit = 
0x3 Value to [f0f0f0fL]..
- CPU 003f0300 booting -
- Current EL 00000008 -
- Initialize CPU -
- Turning on paging -
- Ready -
(XEN) GICv3: CPU127: Found redistributor in region 127 @0000000042079000
(XEN) CPU127: Guest atomics will try 28 times before pausing the domain
(XEN) CPU 127 booted.
(XEN) Brought up 128 CPUs
(XEN) I/O virtualisation disabled
(XEN) P2M: 48-bit IPA with 48-bit PA and 16-bit VMID
(XEN) P2M: 4 levels with order-0 root, VTCR 0x800d3590
(XEN) Adding cpu 0 to runqueue 0
(XEN)  First cpu on runqueue, activating
(XEN) Adding cpu 1 to runqueue 0
(XEN) Adding cpu 2 to runqueue 0
(XEN) Adding cpu 3 to runqueue 0
(XEN) Adding cpu 4 to runqueue 0
(XEN) Adding cpu 5 to runqueue 0
(XEN) Adding cpu 6 to runqueue 0
(XEN) Adding cpu 7 to runqueue 0
(XEN) Adding cpu 8 to runqueue 0
(XEN) Adding cpu 9 to runqueue 0
(XEN) Adding cpu 10 to runqueue 0
(XEN) Adding cpu 11 to runqueue 0
(XEN) Adding cpu 12 to runqueue 0
(XEN) Adding cpu 13 to runqueue 0
(XEN) Adding cpu 14 to runqueue 0
(XEN) Adding cpu 15 to runqueue 0
(XEN) Adding cpu 16 to runqueue 0
(XEN) Adding cpu 17 to runqueue 0
(XEN) Adding cpu 18 to runqueue 0
(XEN) Adding cpu 19 to runqueue 0
(XEN) Adding cpu 20 to runqueue 0
(XEN) Adding cpu 21 to runqueue 0
(XEN) Adding cpu 22 to runqueue 0
(XEN) Adding cpu 23 to runqueue 0
(XEN) Adding cpu 24 to runqueue 0
(XEN) Adding cpu 25 to runqueue 0
(XEN) Adding cpu 26 to runqueue 0
(XEN) Adding cpu 27 to runqueue 0
(XEN) Adding cpu 28 to runqueue 0
(XEN) Adding cpu 29 to runqueue 0
(XEN) Adding cpu 30 to runqueue 0
(XEN) Adding cpu 31 to runqueue 0
(XEN) Adding cpu 32 to runqueue 0
(XEN) Adding cpu 33 to runqueue 0
(XEN) Adding cpu 34 to runqueue 0
(XEN) Adding cpu 35 to runqueue 0
(XEN) Adding cpu 36 to runqueue 0
(XEN) Adding cpu 37 to runqueue 0
(XEN) Adding cpu 38 to runqueue 0
(XEN) Adding cpu 39 to runqueue 0
(XEN) Adding cpu 40 to runqueue 0
(XEN) Adding cpu 41 to runqueue 0
(XEN) Adding cpu 42 to runqueue 0
(XEN) Adding cpu 43 to runqueue 0
(XEN) Adding cpu 44 to runqueue 0
(XEN) Adding cpu 45 to runqueue 0
(XEN) Adding cpu 46 to runqueue 0
(XEN) Adding cpu 47 to runqueue 0
(XEN) Adding cpu 48 to runqueue 0
(XEN) Adding cpu 49 to runqueue 0
(XEN) Adding cpu 50 to runqueue 0
(XEN) Adding cpu 51 to runqueue 0
(XEN) Adding cpu 52 to runqueue 0
(XEN) Adding cpu 53 to runqueue 0
(XEN) Adding cpu 54 to runqueue 0
(XEN) Adding cpu 55 to runqueue 0
(XEN) Adding cpu 56 to runqueue 0
(XEN) Adding cpu 57 to runqueue 0
(XEN) Adding cpu 58 to runqueue 0
(XEN) Adding cpu 59 to runqueue 0
(XEN) Adding cpu 60 to runqueue 0
(XEN) Adding cpu 61 to runqueue 0
(XEN) Adding cpu 62 to runqueue 0
(XEN) Adding cpu 63 to runqueue 0
(XEN) Adding cpu 64 to runqueue 0
(XEN) Adding cpu 65 to runqueue 0
(XEN) Adding cpu 66 to runqueue 0
(XEN) Adding cpu 67 to runqueue 0
(XEN) Adding cpu 68 to runqueue 0
(XEN) Adding cpu 69 to runqueue 0
(XEN) Adding cpu 70 to runqueue 0
(XEN) Adding cpu 71 to runqueue 0
(XEN) Adding cpu 72 to runqueue 0
(XEN) Adding cpu 73 to runqueue 0
(XEN) Adding cpu 74 to runqueue 0
(XEN) Adding cpu 75 to runqueue 0
(XEN) Adding cpu 76 to runqueue 0
(XEN) Adding cpu 77 to runqueue 0
(XEN) Adding cpu 78 to runqueue 0
(XEN) Adding cpu 79 to runqueue 0
(XEN) Adding cpu 80 to runqueue 0
(XEN) Adding cpu 81 to runqueue 0
(XEN) Adding cpu 82 to runqueue 0
(XEN) Adding cpu 83 to runqueue 0
(XEN) Adding cpu 84 to runqueue 0
(XEN) Adding cpu 85 to runqueue 0
(XEN) Adding cpu 86 to runqueue 0
(XEN) Adding cpu 87 to runqueue 0
(XEN) Adding cpu 88 to runqueue 0
(XEN) Adding cpu 89 to runqueue 0
(XEN) Adding cpu 90 to runqueue 0
(XEN) Adding cpu 91 to runqueue 0
(XEN) Adding cpu 92 to runqueue 0
(XEN) Adding cpu 93 to runqueue 0
(XEN) Adding cpu 94 to runqueue 0
(XEN) Adding cpu 95 to runqueue 0
(XEN) Adding cpu 96 to runqueue 0
(XEN) Adding cpu 97 to runqueue 0
(XEN) Adding cpu 98 to runqueue 0
(XEN) Adding cpu 99 to runqueue 0
(XEN) Adding cpu 100 to runqueue 0
(XEN) Adding cpu 101 to runqueue 0
(XEN) Adding cpu 102 to runqueue 0
(XEN) Adding cpu 103 to runqueue 0
(XEN) Adding cpu 104 to runqueue 0
(XEN) Adding cpu 105 to runqueue 0
(XEN) Adding cpu 106 to runqueue 0
(XEN) Adding cpu 107 to runqueue 0
(XEN) Adding cpu 108 to runqueue 0
(XEN) Adding cpu 109 to runqueue 0
(XEN) Adding cpu 110 to runqueue 0
(XEN) Adding cpu 111 to runqueue 0
(XEN) Adding cpu 112 to runqueue 0
(XEN) Adding cpu 113 to runqueue 0
(XEN) Adding cpu 114 to runqueue 0
(XEN) Adding cpu 115 to runqueue 0
(XEN) Adding cpu 116 to runqueue 0
(XEN) Adding cpu 117 to runqueue 0
(XEN) Adding cpu 118 to runqueue 0
(XEN) Adding cpu 119 to runqueue 0
(XEN) Adding cpu 120 to runqueue 0
(XEN) Adding cpu 121 to runqueue 0
(XEN) Adding cpu 122 to runqueue 0
(XEN) Adding cpu 123 to runqueue 0
(XEN) Adding cpu 124 to runqueue 0
(XEN) Adding cpu 125 to runqueue 0
(XEN) Adding cpu 126 to runqueue 0
(XEN) Adding cpu 127 to runqueue 0
(XEN) alternatives: Patching with alt table 00000000002d4f38 -> 
00000000002d5754
(XEN) *** LOADING DOMAIN 0 ***
(XEN) Loading d0 kernel from boot module @ 0000000016257000
(XEN) Allocating 1:1 mappings totalling 4096MB for dom0:
(XEN) BANK[0] 0x00000008000000-0x00000010000000 (128MB)
(XEN) BANK[1] 0x00000020000000-0x00000038000000 (384MB)
(XEN) BANK[2] 0x00000050000000-0x00000080000000 (768MB)
(XEN) BANK[3] 0x00202000000000-0x00202080000000 (2048MB)
(XEN) BANK[4] 0x002020b0000000-0x002020c0000000 (256MB)
(XEN) BANK[5] 0x00202600000000-0x00202620000000 (512MB)
(XEN) Grant table range: 0x000000181ce000-0x0000001820e000
(XEN) Allocating PPI 16 for event channel interrupt
(XEN) Loading zImage from 0000000016257000 to 
0000000008080000-0000000009981200
(XEN) Loading d0 DTB to 0x000000000fe00000-0x000000000fe0025b
(XEN) Initial low memory virq threshold set at 0x4000 pages.
(XEN) Scrubbing Free RAM in background
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch input)
(XEN) Freed 340kB init memory.
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER4
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER8
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER12
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER16
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER20
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER24
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER28
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER32
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER36
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER40
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER44
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER48
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER52
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER56
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER60
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER64
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER68
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER72
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER76
(XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER80
(XEN) d0v0: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v1: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v2: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v3: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v4: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v5: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v6: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v7: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v8: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v9: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v10: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v11: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v12: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v13: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v14: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v15: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v16: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v17: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v18: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v19: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v20: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v21: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v22: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v23: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v24: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v25: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v26: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v27: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v28: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v29: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v30: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v31: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v32: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v33: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v34: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v35: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v36: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v37: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v38: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v39: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v40: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v41: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v42: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v43: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v44: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v45: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v46: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v47: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v48: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v49: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v50: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v51: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v52: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v53: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v54: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v55: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v56: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v57: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v58: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v59: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v60: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v61: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v62: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v63: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v64: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v65: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v66: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v67: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v68: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v69: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v70: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v71: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v72: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v73: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v74: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v75: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v76: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v77: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v78: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v79: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v80: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v81: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v82: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v83: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v84: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v85: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v86: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v87: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v88: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v89: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v90: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v91: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v92: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v93: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v94: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v95: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v96: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v97: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v98: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v99: vGICR: SGI: unhandled word write 0x000000ffffffff to ICACTIVER0
(XEN) d0v100: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v101: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v102: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v103: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v104: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v105: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v106: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v107: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v108: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v109: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v110: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v111: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v112: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v113: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v114: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v115: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v116: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v117: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v118: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v119: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v120: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v121: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v122: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v123: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v124: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v125: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v126: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) d0v127: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=25: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
(XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010]
[    0.000000] Linux version 5.5.0-rc5 (joyx@Turing-Arch-b) (gcc version 
4.9.1 20140505 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.05 - 
Linaro GCC 4.9-2014.05)) #132 SMP PREEMPT Tue Jan 7 15:43:06 CST 2020
[    0.000000] Xen XEN_VERSION.XEN_SUBVERSION support found
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: EFI v2.50 by Xen
[    0.000000] efi:  ACPI 2.0=0x181d0e70
[    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000181D0E70 000024 (v02 HISI  )
[    0.000000] ACPI: XSDT 0x00000000181D0DB0 0000BC (v01 HISI HIP08    
00000000      01000013)
[    0.000000] ACPI: FACP 0x00000000181CE000 000114 (v06 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: DSDT 0x0000000039630000 00A84D (v02 HISI HIP08    
00000000 INTL 20181213)
[    0.000000] ACPI: PCCT 0x0000000039DC0000 00008A (v01 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: SSDT 0x0000000039DB0000 00E56A (v02 HISI HIP07    
00000000 INTL 20181213)
[    0.000000] ACPI: BERT 0x0000000039D80000 000030 (v01 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: HEST 0x0000000039D60000 00058C (v01 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: ERST 0x0000000039D20000 000230 (v01 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: EINJ 0x0000000039D10000 000170 (v01 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: GTDT 0x0000000039900000 000084 (v03 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: MCFG 0x0000000039680000 00003C (v01 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: SLIT 0x0000000039670000 00003C (v01 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: SPCR 0x0000000039660000 000050 (v02 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: SRAT 0x0000000039650000 0009C0 (v03 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: APIC 0x00000000181CE118 002C6C (v04 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: IORT 0x0000000039620000 001060 (v00 HISI HIP08    
00000000 INTL 20181213)
[    0.000000] ACPI: PPTT 0x0000000018540000 0037E4 (v02 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: MPAM 0x0000000018550000 00063C (v01 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: SPMI 0x0000000018530000 000041 (v05 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: iBFT 0x0000000018510000 000800 (v01 HISI HIP08    
00000000      00000000)
[    0.000000] ACPI: STAO 0x00000000181D0D88 000025 (v01 HISI HIP08    
00000000 HISI 20151124)
[    0.000000] ACPI: SPCR: console: uart,mmio,0x3f00002f8,115200
[    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x2080000000-0x27ffffffff]
[    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00000000-0x7fffffff]
[    0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 0x202000000000-0x2027ffffffff]
[    0.000000] NUMA: Initmem setup node 0 [<memory-less node>]
[    0.000000] NUMA: NODE_DATA [mem 0x20261f7f1100-0x20261f7f2fff]
[    0.000000] NUMA: NODE_DATA(0) on node 3
[    0.000000] NUMA: NODE_DATA [mem 0x7dffe100-0x7dffffff]
[    0.000000] NUMA: Initmem setup node 2 [<memory-less node>]
[    0.000000] NUMA: NODE_DATA [mem 0x20261f7ef200-0x20261f7f10ff]
[    0.000000] NUMA: NODE_DATA(2) on node 3
[    0.000000] NUMA: NODE_DATA [mem 0x20261f7ed300-0x20261f7ef1ff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000008000000-0x000000003fffffff]
[    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000020261fffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   1: [mem 0x0000000008000000-0x000000000fffffff]
[    0.000000]   node   1: [mem 0x00000000181ce000-0x00000000181d1fff]
[    0.000000]   node   1: [mem 0x0000000018510000-0x000000001851ffff]
[    0.000000]   node   1: [mem 0x0000000018530000-0x000000001855ffff]
[    0.000000]   node   1: [mem 0x0000000020000000-0x0000000037ffffff]
[    0.000000]   node   1: [mem 0x0000000039620000-0x000000003968ffff]
[    0.000000]   node   1: [mem 0x0000000039900000-0x000000003990ffff]
[    0.000000]   node   1: [mem 0x0000000039920000-0x000000003992ffff]
[    0.000000]   node   1: [mem 0x0000000039d10000-0x0000000039d2ffff]
[    0.000000]   node   1: [mem 0x0000000039d60000-0x0000000039d6ffff]
[    0.000000]   node   1: [mem 0x0000000039d80000-0x0000000039d8ffff]
[    0.000000]   node   1: [mem 0x0000000039db0000-0x0000000039deffff]
[    0.000000]   node   1: [mem 0x0000000050000000-0x000000007fffffff]
[    0.000000]   node   3: [mem 0x0000202000000000-0x000020207fffffff]
[    0.000000]   node   3: [mem 0x00002020b0000000-0x00002020bfffffff]
[    0.000000]   node   3: [mem 0x0000202600000000-0x000020261fffffff]
[    0.000000] Could not find start_pfn for node 0
[    0.000000] Initmem setup node 0 [mem 
0x0000000000000000-0x0000000000000000]
[    0.000000] Initmem setup node 1 [mem 
0x0000000008000000-0x000000007fffffff]
[    0.000000] Could not find start_pfn for node 2
[    0.000000] Initmem setup node 2 [mem 
0x0000000000000000-0x0000000000000000]
[    0.000000] Initmem setup node 3 [mem 
0x0000202000000000-0x000020261fffffff]
[    0.000000] psci: probing for conduit method from ACPI.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: Trusted OS migration not required
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x0 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x1 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x2 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x3 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x4 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x5 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x6 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x7 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x8 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x9 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0xa -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0xb -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0xc -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0xd -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0xe -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0xf -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x100 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x101 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x102 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x103 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x104 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x105 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x106 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x107 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x108 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x109 -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10a -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10b -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10c -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10d -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10e -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10f -> Node 0
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x200 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x201 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x202 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x203 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x204 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x205 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x206 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x207 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x208 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x209 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x20a -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x20b -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x20c -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x20d -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x20e -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x20f -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x300 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x301 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x302 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x303 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x304 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x305 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x306 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x307 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x308 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x309 -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30a -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30b -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30c -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30d -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30e -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30f -> Node 1
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x400 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x401 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x402 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x403 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x404 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x405 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x406 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x407 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x408 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x409 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x40a -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x40b -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x40c -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x40d -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x40e -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x40f -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x500 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x501 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x502 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x503 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x504 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x505 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x506 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x507 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x508 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x509 -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50a -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50b -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50c -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50d -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50e -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50f -> Node 2
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x600 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x601 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x602 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x603 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x604 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x605 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x606 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x607 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x608 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x609 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x60a -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x60b -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x60c -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x60d -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x60e -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x60f -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x700 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x701 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x702 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x703 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x704 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x705 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x706 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x707 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x708 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x709 -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x70a -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x70b -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x70c -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x70d -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x70e -> Node 3
[    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x70f -> Node 3
[    0.000000] percpu: Embedded 22 pages/cpu s53120 r8192 d28800 u90112
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: detected: Hardware dirty bit management
[    0.000000] Built 4 zonelists, mobility grouping on.  Total pages: 
1032526
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: rdinit=/init acpi=force noinitrd 
root=/dev/sdb1 rw
[    0.000000] printk: log_buf_len individual max cpu contribution: 4096 
bytes
[    0.000000] printk: log_buf_len total cpu_extra contributions: 520192 
bytes
[    0.000000] printk: log_buf_len min size: 131072 bytes
[    0.000000] printk: log_buf_len: 1048576 bytes
[    0.000000] printk: early log buf free: 113908(86%)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0x34000000-0x38000000] (64MB)
[    0.000000] Memory: 3950632K/4195664K available (11836K kernel code, 
1924K rwdata, 6580K rodata, 5184K init, 460K bss, 212264K reserved, 
32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=128, Nodes=4
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to 
nr_cpu_ids=128.
[    0.000000]  Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay 
is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, 
nr_cpu_ids=128
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: 640 SPIs implemented
[    0.000000] GICv3: 0 Extended SPIs implemented
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: 16 PPIs implemented
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 
0:0x00000000ae100000
[    0.000000] SRAT: PXM 0 -> ITS 0 -> Node 0
[    0.000000] SRAT: PXM 2 -> ITS 1 -> Node 2
[    0.000000] ITS [mem 0x202100000-0x20211ffff]
[    0.000000] ITS@0x0000000202100000: allocated 65536 Devices @7d180000 
(flat, esz 8, psz 64K, shr 1)
[    0.000000] ITS@0x0000000202100000: allocated 32768 Interrupt 
Collections @7d160000 (flat, esz 2, psz 64K, shr 1)
[    0.000000] ITS [mem 0x200202100000-0x20020211ffff]
[    0.000000] ITS@0x0000200202100000: allocated 65536 Devices 
@20261a880000 (flat, esz 8, psz 64K, shr 1)
[    0.000000] ITS@0x0000200202100000: allocated 32768 Interrupt 
Collections @20261a820000 (flat, esz 2, psz 64K, shr 1)
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:1877 
its_init+0x36c/0x5f8
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc5 #132
[    0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO)
[    0.000000] pc : its_init+0x36c/0x5f8
[    0.000000] lr : its_init+0x368/0x5f8
[    0.000000] sp : ffff8000117a3c70
[    0.000000] x29: ffff8000117a3c70 x28: ffff8000117a3ea0
[    0.000000] x27: ffff800011d80000 x26: ffff00007d14c000
[    0.000000] x25: ffff8000117ad140 x24: ffff8000117a9000
[    0.000000] x23: ffff8000117db000 x22: ffff8000119cdd30
[    0.000000] x21: ffff8000119cd000 x20: ffff8000117ad140
[    0.000000] x19: ffff8000119cd000 x18: ffff800013dfffff
[    0.000000] x17: 0140000000000000 x16: 0000008000000000
[    0.000000] x15: ffff800013dfffff x14: 324020736e6f6974
[    0.000000] x13: ffff00007dffea20 x12: 0000000000000000
[    0.000000] x11: 0000000000000000 x10: ffff00007dffea00
[    0.000000] x9 : ffff00007dffe9f0 x8 : ffff00007d180000
[    0.000000] x7 : a2a2a2a2a2a2a2a2 x6 : ffff8000117a3a40
[    0.000000] x5 : 0000000000000000 x4 : 0000000000000000
[    0.000000] x3 : 0000000000000010 x2 : 0000000000000000
[    0.000000] x1 : 00000000ffffffed x0 : 00000000ffffffed
[    0.000000] Call trace:
[    0.000000]  its_init+0x36c/0x5f8
[    0.000000]  gic_init_bases+0x4b0/0x50c
[    0.000000]  gic_acpi_init+0x138/0x270
[    0.000000]  acpi_match_madt+0x44/0x78
[    0.000000]  acpi_table_parse_entries_array+0x1a8/0x24c
[    0.000000]  acpi_table_parse_entries+0x34/0x54
[    0.000000]  acpi_table_parse_madt+0x28/0x30
[    0.000000]  __acpi_probe_device_table+0x90/0xe8
[    0.000000]  irqchip_init+0x34/0x3c
[    0.000000]  init_IRQ+0x104/0x198
[    0.000000]  start_kernel+0x278/0x450
[    0.000000] random: get_random_bytes called from 
print_oops_end_marker+0x48/0x64 with crng_init=0
[    0.000000] ---[ end trace 0000000000000000 ]---
[    0.000000] GICv3: using LPI property table @0x000000007d170000
[    0.000000] ------------[ cut here ]------------
[    0.000000] WARNING: CPU: 0 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.000000] Modules linked in:
[    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W         
5.5.0-rc5 #132
[    0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO)
[    0.000000] pc : its_cpu_init+0x2f0/0x494
[    0.000000] lr : its_cpu_init+0x2ec/0x494
[    0.000000] sp : ffff8000117a3cb0
[    0.000000] x29: ffff8000117a3cb0 x28: ffff8000117a3ea0
[    0.000000] x27: ffff800011d80000 x26: 0000000000000000
[    0.000000] x25: 0000000000000040 x24: ffff800011dc0000
[    0.000000] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.000000] x21: ffff8000117a9000 x20: fffffe0001d48000
[    0.000000] x19: ffff8000117db000 x18: ffff800013dfffff
[    0.000000] x17: 0140000000000000 x16: 0000008000000000
[    0.000000] x15: ffff800013dfffff x14: 324020736e6f6974
[    0.000000] x13: ffff00007dffea20 x12: 0000000000000000
[    0.000000] x11: 0000000000000000 x10: ffff00007dffea00
[    0.000000] x9 : ffff00007dffe9f0 x8 : ffff00007dffe9e0
[    0.000000] x7 : ffffa0260e14c000 x6 : ffff8000117a3a30
[    0.000000] x5 : ffff8000117db930 x4 : ffffa0260e14c000
[    0.000000] x3 : 000000000000003d x2 : 0000000000000000
[    0.000000] x1 : 00000000ffffffed x0 : 00000000ffffffed
[    0.000000] Call trace:
[    0.000000]  its_cpu_init+0x2f0/0x494
[    0.000000]  gic_init_bases+0x4b4/0x50c
[    0.000000]  gic_acpi_init+0x138/0x270
[    0.000000]  acpi_match_madt+0x44/0x78
[    0.000000]  acpi_table_parse_entries_array+0x1a8/0x24c
[    0.000000]  acpi_table_parse_entries+0x34/0x54
[    0.000000]  acpi_table_parse_madt+0x28/0x30
[    0.000000]  __acpi_probe_device_table+0x90/0xe8
[    0.000000]  irqchip_init+0x34/0x3c
[    0.000000]  init_IRQ+0x104/0x198
[    0.000000]  start_kernel+0x278/0x450
[    0.000000] ---[ end trace f68728a0d3053b52 ]---
[    0.000000] GICv3: CPU0: using allocated LPI pending table 
@0x000000007d200000
[    0.000000] arch_timer: cp15 timer(s) running at 100.00MHz (virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff 
max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns
[    0.000001] sched_clock: 56 bits at 100MHz, resolution 10ns, wraps 
every 4398046511100ns
[    0.000154] Console: colour dummy device 80x25
[    0.000228] mempolicy: Enabling automatic NUMA balancing. Configure 
with numa_balancing= or the kernel.numa_balancing sysctl
[    0.000240] ACPI: Core revision 20191018
[    0.000427] Calibrating delay loop (skipped), value calculated using 
timer frequency.. 200.00 BogoMIPS (lpj=400000)
[    0.000430] pid_max: default: 131072 minimum: 1024
[    0.000494] LSM: Security Framework initializing
[    0.001306] Dentry cache hash table entries: 524288 (order: 10, 
4194304 bytes, vmalloc)
[    0.001758] Inode-cache hash table entries: 262144 (order: 9, 2097152 
bytes, vmalloc)
[    0.001794] Mount-cache hash table entries: 8192 (order: 4, 65536 
bytes, vmalloc)
[    0.001810] Mountpoint-cache hash table entries: 8192 (order: 4, 
65536 bytes, vmalloc)
[    0.032081] ASID allocator initialised with 32768 entries
[    0.032378] xen:grant_table: Grant tables using version 1 layout
[    0.032410] Grant table initialized
[    0.032518] xen:events: Using FIFO-based ABI
[    0.032537] Xen: initializing cpu0
[    0.040078] rcu: Hierarchical SRCU implementation.
[    0.048104] Platform MSI: ITS@0x202100000 domain created
[    0.048107] Platform MSI: ITS@0x200202100000 domain created
[    0.048112] PCI/MSI: ITS@0x202100000 domain created
[    0.048114] PCI/MSI: ITS@0x200202100000 domain created
[    0.048125] EFI runtime services access via paravirt.
[    0.056105] smp: Bringing up secondary CPUs ...
[    0.088198] Detected VIPT I-cache on CPU1
[    0.088208] GICv3: CPU1: found redistributor 1 region 
0:0x00000000ae120000
[    0.094811] ------------[ cut here ]------------
[    0.094816] WARNING: CPU: 1 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.094816] Modules linked in:
[    0.094819] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W         
5.5.0-rc5 #132
[    0.094821] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.094822] pc : its_cpu_init+0x2f0/0x494
[    0.094824] lr : its_cpu_init+0x2ec/0x494
[    0.094825] sp : ffff800011eb3ee0
[    0.094825] x29: ffff800011eb3ee0 x28: 0000000000000000
[    0.094826] x27: 0000000000000000 x26: 0000000000000000
[    0.094827] x25: 0000000000000000 x24: ffff800011de0000
[    0.094828] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.094829] x21: ffff8000117a9000 x20: fffffe0001d48400
[    0.094830] x19: ffff8000117db000 x18: 0000000000000000
[    0.094831] x17: 0000000000000000 x16: 0000000000000000
[    0.094832] x15: 0000000000000000 x14: 0000000000000000
[    0.094833] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.094834] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.094835] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.094836] x7 : 0000000000000000 x6 : 0000000000000070
[    0.094837] x5 : 00000000a0a0a0a0 x4 : ffffa0260e162000
[    0.094838] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.094839] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.094840] Call trace:
[    0.094842]  its_cpu_init+0x2f0/0x494
[    0.094843]  gic_starting_cpu+0x18/0x24
[    0.094845]  cpuhp_invoke_callback+0x84/0x1e0
[    0.094846]  notify_cpu_starting+0x9c/0xb8
[    0.094847]  secondary_start_kernel+0xdc/0x168
[    0.094848] ---[ end trace f68728a0d3053b53 ]---
[    0.094854] GICv3: CPU1: using allocated LPI pending table 
@0x000000007d210000
[    0.094878] Xen: initializing cpu1
[    0.094885] CPU1: Booted secondary processor 0x0000000001 [0x481fd010]
[    0.124231] Detected VIPT I-cache on CPU2
[    0.124240] GICv3: CPU2: found redistributor 2 region 
1:0x00000000ae140000
[    0.130839] ------------[ cut here ]------------
[    0.130842] WARNING: CPU: 2 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.130842] Modules linked in:
[    0.130844] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G W         
5.5.0-rc5 #132
[    0.130846] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.130847] pc : its_cpu_init+0x2f0/0x494
[    0.130849] lr : its_cpu_init+0x2ec/0x494
[    0.130849] sp : ffff800011ebbee0
[    0.130850] x29: ffff800011ebbee0 x28: 0000000000000000
[    0.130851] x27: 0000000000000000 x26: 0000000000000000
[    0.130852] x25: 0000000000000000 x24: ffff800011e40000
[    0.130853] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.130855] x21: ffff8000117a9000 x20: fffffe0001d48800
[    0.130856] x19: ffff8000117db000 x18: 0000000000000000
[    0.130857] x17: 0000000000000000 x16: 0000000000000000
[    0.130858] x15: 0000000000000000 x14: 0000000000000000
[    0.130859] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.130860] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.130861] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.130862] x7 : 0000000000000000 x6 : 0000000000000070
[    0.130863] x5 : 00000000a0a0a0a0 x4 : ffffa0260e178000
[    0.130864] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.130865] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.130866] Call trace:
[    0.130867]  its_cpu_init+0x2f0/0x494
[    0.130869]  gic_starting_cpu+0x18/0x24
[    0.130870]  cpuhp_invoke_callback+0x84/0x1e0
[    0.130871]  notify_cpu_starting+0x9c/0xb8
[    0.130872]  secondary_start_kernel+0xdc/0x168
[    0.130873] ---[ end trace f68728a0d3053b54 ]---
[    0.130878] GICv3: CPU2: using allocated LPI pending table 
@0x000000007d220000
[    0.130899] Xen: initializing cpu2
[    0.130905] CPU2: Booted secondary processor 0x0000000002 [0x481fd010]
[    0.160279] Detected VIPT I-cache on CPU3
[    0.160289] GICv3: CPU3: found redistributor 3 region 
1:0x00000000ae160000
[    0.166887] ------------[ cut here ]------------
[    0.166890] WARNING: CPU: 3 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.166890] Modules linked in:
[    0.166892] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G W         
5.5.0-rc5 #132
[    0.166894] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.166895] pc : its_cpu_init+0x2f0/0x494
[    0.166897] lr : its_cpu_init+0x2ec/0x494
[    0.166897] sp : ffff800011f0bee0
[    0.166898] x29: ffff800011f0bee0 x28: 0000000000000000
[    0.166899] x27: 0000000000000000 x26: 0000000000000000
[    0.166900] x25: 0000000000000000 x24: ffff800011e60000
[    0.166901] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.166902] x21: ffff8000117a9000 x20: fffffe0001d48c00
[    0.166903] x19: ffff8000117db000 x18: 0000000000000000
[    0.166904] x17: 0000000000000000 x16: 0000000000000000
[    0.166905] x15: 0000000000000000 x14: 0000000000000000
[    0.166906] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.166907] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.166909] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.166910] x7 : 0000000000000000 x6 : 0000000000000070
[    0.166911] x5 : 00000000a0a0a0a0 x4 : ffffa0260e18e000
[    0.166912] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.166912] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.166913] Call trace:
[    0.166915]  its_cpu_init+0x2f0/0x494
[    0.166916]  gic_starting_cpu+0x18/0x24
[    0.166917]  cpuhp_invoke_callback+0x84/0x1e0
[    0.166919]  notify_cpu_starting+0x9c/0xb8
[    0.166920]  secondary_start_kernel+0xdc/0x168
[    0.166921] ---[ end trace f68728a0d3053b55 ]---
[    0.166926] GICv3: CPU3: using allocated LPI pending table 
@0x000000007d230000
[    0.166946] Xen: initializing cpu3
[    0.166953] CPU3: Booted secondary processor 0x0000000003 [0x481fd010]
[    0.196341] Detected VIPT I-cache on CPU4
[    0.196358] GICv3: CPU4: found redistributor 4 region 
2:0x00000000ae180000
[    0.202964] ------------[ cut here ]------------
[    0.202970] WARNING: CPU: 4 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.202971] Modules linked in:
[    0.202974] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G W         
5.5.0-rc5 #132
[    0.202975] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.202977] pc : its_cpu_init+0x2f0/0x494
[    0.202978] lr : its_cpu_init+0x2ec/0x494
[    0.202979] sp : ffff800011f13ee0
[    0.202979] x29: ffff800011f13ee0 x28: 0000000000000000
[    0.202981] x27: 0000000000000000 x26: 0000000000000000
[    0.202982] x25: 0000000000000000 x24: ffff800011ec0000
[    0.202983] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.202984] x21: ffff8000117a9000 x20: fffffe0001d49000
[    0.202985] x19: ffff8000117db000 x18: 0000000000000000
[    0.202986] x17: 0000000000000000 x16: 0000000000000000
[    0.202987] x15: 0000000000000000 x14: 0000000000000000
[    0.202988] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.202989] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.202990] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.202991] x7 : 0000000000000000 x6 : 0000000000000070
[    0.202992] x5 : 00000000a0a0a0a0 x4 : ffffa0260e1a4000
[    0.202993] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.202994] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.202995] Call trace:
[    0.202997]  its_cpu_init+0x2f0/0x494
[    0.202998]  gic_starting_cpu+0x18/0x24
[    0.203000]  cpuhp_invoke_callback+0x84/0x1e0
[    0.203001]  notify_cpu_starting+0x9c/0xb8
[    0.203003]  secondary_start_kernel+0xdc/0x168
[    0.203004] ---[ end trace f68728a0d3053b56 ]---
[    0.203010] GICv3: CPU4: using allocated LPI pending table 
@0x000000007d240000
[    0.203039] Xen: initializing cpu4
[    0.203050] CPU4: Booted secondary processor 0x0000000004 [0x481fd010]
[    0.232378] Detected VIPT I-cache on CPU5
[    0.232392] GICv3: CPU5: found redistributor 5 region 
2:0x00000000ae1a0000
[    0.238991] ------------[ cut here ]------------
[    0.238995] WARNING: CPU: 5 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.238996] Modules linked in:
[    0.238998] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W         
5.5.0-rc5 #132
[    0.238999] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.239001] pc : its_cpu_init+0x2f0/0x494
[    0.239002] lr : its_cpu_init+0x2ec/0x494
[    0.239003] sp : ffff800011f1bee0
[    0.239003] x29: ffff800011f1bee0 x28: 0000000000000000
[    0.239005] x27: 0000000000000000 x26: 0000000000000000
[    0.239006] x25: 0000000000000000 x24: ffff800011ee0000
[    0.239007] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.239008] x21: ffff8000117a9000 x20: fffffe0001d49400
[    0.239009] x19: ffff8000117db000 x18: 0000000000000000
[    0.239010] x17: 0000000000000000 x16: 0000000000000000
[    0.239010] x15: 0000000000000000 x14: 0000000000000000
[    0.239011] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.239012] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.239013] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.239014] x7 : 0000000000000000 x6 : 0000000000000070
[    0.239015] x5 : 00000000a0a0a0a0 x4 : ffffa0260e1ba000
[    0.239016] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.239017] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.239018] Call trace:
[    0.239020]  its_cpu_init+0x2f0/0x494
[    0.239021]  gic_starting_cpu+0x18/0x24
[    0.239022]  cpuhp_invoke_callback+0x84/0x1e0
[    0.239024]  notify_cpu_starting+0x9c/0xb8
[    0.239025]  secondary_start_kernel+0xdc/0x168
[    0.239026] ---[ end trace f68728a0d3053b57 ]---
[    0.239031] GICv3: CPU5: using allocated LPI pending table 
@0x000000007d250000
[    0.239053] Xen: initializing cpu5
[    0.239061] CPU5: Booted secondary processor 0x0000000005 [0x481fd010]
[    0.268429] Detected VIPT I-cache on CPU6
[    0.268443] GICv3: CPU6: found redistributor 6 region 
3:0x00000000ae1c0000
[    0.275043] ------------[ cut here ]------------
[    0.275046] WARNING: CPU: 6 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.275047] Modules linked in:
[    0.275049] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G W         
5.5.0-rc5 #132
[    0.275050] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.275052] pc : its_cpu_init+0x2f0/0x494
[    0.275053] lr : its_cpu_init+0x2ec/0x494
[    0.275054] sp : ffff800011f23ee0
[    0.275054] x29: ffff800011f23ee0 x28: 0000000000000000
[    0.275055] x27: 0000000000000000 x26: 0000000000000000
[    0.275056] x25: 0000000000000000 x24: ffff800011f40000
[    0.275057] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.275059] x21: ffff8000117a9000 x20: fffffe0001d49800
[    0.275060] x19: ffff8000117db000 x18: 0000000000000000
[    0.275061] x17: 0000000000000000 x16: 0000000000000000
[    0.275062] x15: 0000000000000000 x14: 0000000000000000
[    0.275063] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.275064] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.275065] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.275066] x7 : 0000000000000000 x6 : 0000000000000070
[    0.275067] x5 : 00000000a0a0a0a0 x4 : ffffa0260e1d0000
[    0.275068] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.275069] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.275070] Call trace:
[    0.275072]  its_cpu_init+0x2f0/0x494
[    0.275073]  gic_starting_cpu+0x18/0x24
[    0.275075]  cpuhp_invoke_callback+0x84/0x1e0
[    0.275076]  notify_cpu_starting+0x9c/0xb8
[    0.275077]  secondary_start_kernel+0xdc/0x168
[    0.275078] ---[ end trace f68728a0d3053b58 ]---
[    0.275083] GICv3: CPU6: using allocated LPI pending table 
@0x000000007d260000
[    0.275103] Xen: initializing cpu6
[    0.275111] CPU6: Booted secondary processor 0x0000000006 [0x481fd010]
[    0.304481] Detected VIPT I-cache on CPU7
[    0.304496] GICv3: CPU7: found redistributor 7 region 
3:0x00000000ae1e0000
[    0.311094] ------------[ cut here ]------------
[    0.311098] WARNING: CPU: 7 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.311098] Modules linked in:
[    0.311100] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G W         
5.5.0-rc5 #132
[    0.311102] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.311103] pc : its_cpu_init+0x2f0/0x494
[    0.311105] lr : its_cpu_init+0x2ec/0x494
[    0.311105] sp : ffff800011f2bee0
[    0.311106] x29: ffff800011f2bee0 x28: 0000000000000000
[    0.311107] x27: 0000000000000000 x26: 0000000000000000
[    0.311108] x25: 0000000000000000 x24: ffff800011f60000
[    0.311109] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.311110] x21: ffff8000117a9000 x20: fffffe0001d49c00
[    0.311111] x19: ffff8000117db000 x18: 0000000000000000
[    0.311112] x17: 0000000000000000 x16: 0000000000000000
[    0.311113] x15: 0000000000000000 x14: 0000000000000000
[    0.311114] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.311115] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.311116] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.311117] x7 : 0000000000000000 x6 : 0000000000000070
[    0.311118] x5 : 00000000a0a0a0a0 x4 : ffffa0260e1e6000
[    0.311119] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.311120] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.311121] Call trace:
[    0.311122]  its_cpu_init+0x2f0/0x494
[    0.311124]  gic_starting_cpu+0x18/0x24
[    0.311125]  cpuhp_invoke_callback+0x84/0x1e0
[    0.311126]  notify_cpu_starting+0x9c/0xb8
[    0.311127]  secondary_start_kernel+0xdc/0x168
[    0.311128] ---[ end trace f68728a0d3053b59 ]---
[    0.311133] GICv3: CPU7: using allocated LPI pending table 
@0x000000007d270000
[    0.311154] Xen: initializing cpu7
[    0.311162] CPU7: Booted secondary processor 0x0000000007 [0x481fd010]
[    0.340544] Detected VIPT I-cache on CPU8
[    0.340565] GICv3: CPU8: found redistributor 8 region 
4:0x00000000ae200000
[    0.347169] ------------[ cut here ]------------
[    0.347174] WARNING: CPU: 8 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.347175] Modules linked in:
[    0.347178] CPU: 8 PID: 0 Comm: swapper/8 Tainted: G W         
5.5.0-rc5 #132
[    0.347179] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.347180] pc : its_cpu_init+0x2f0/0x494
[    0.347182] lr : its_cpu_init+0x2ec/0x494
[    0.347182] sp : ffff800011f33ee0
[    0.347183] x29: ffff800011f33ee0 x28: 0000000000000000
[    0.347184] x27: 0000000000000000 x26: 0000000000000000
[    0.347185] x25: 0000000000000000 x24: ffff800011fc0000
[    0.347186] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.347188] x21: ffff8000117a9000 x20: fffffe0001d4a000
[    0.347189] x19: ffff8000117db000 x18: 0000000000000000
[    0.347190] x17: 0000000000000000 x16: 0000000000000000
[    0.347190] x15: 0000000000000000 x14: 0000000000000000
[    0.347191] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.347192] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.347193] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.347194] x7 : 0000000000000000 x6 : 0000000000000070
[    0.347195] x5 : 00000000a0a0a0a0 x4 : ffffa0260e1fc000
[    0.347196] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.347197] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.347198] Call trace:
[    0.347200]  its_cpu_init+0x2f0/0x494
[    0.347201]  gic_starting_cpu+0x18/0x24
[    0.347203]  cpuhp_invoke_callback+0x84/0x1e0
[    0.347204]  notify_cpu_starting+0x9c/0xb8
[    0.347206]  secondary_start_kernel+0xdc/0x168
[    0.347207] ---[ end trace f68728a0d3053b5a ]---
[    0.347212] GICv3: CPU8: using allocated LPI pending table 
@0x000000007d280000
[    0.347239] Xen: initializing cpu8
[    0.347248] CPU8: Booted secondary processor 0x0000000008 [0x481fd010]
[    0.376584] Detected VIPT I-cache on CPU9
[    0.376602] GICv3: CPU9: found redistributor 9 region 
4:0x00000000ae220000
[    0.383202] ------------[ cut here ]------------
[    0.383205] WARNING: CPU: 9 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.383205] Modules linked in:
[    0.383207] CPU: 9 PID: 0 Comm: swapper/9 Tainted: G W         
5.5.0-rc5 #132
[    0.383209] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.383210] pc : its_cpu_init+0x2f0/0x494
[    0.383212] lr : its_cpu_init+0x2ec/0x494
[    0.383213] sp : ffff800011f8bee0
[    0.383213] x29: ffff800011f8bee0 x28: 0000000000000000
[    0.383215] x27: 0000000000000000 x26: 0000000000000000
[    0.383216] x25: 0000000000000000 x24: ffff800011fe0000
[    0.383217] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.383218] x21: ffff8000117a9000 x20: fffffe0001d4a400
[    0.383219] x19: ffff8000117db000 x18: 0000000000000000
[    0.383219] x17: 0000000000000000 x16: 0000000000000000
[    0.383220] x15: 0000000000000000 x14: 0000000000000000
[    0.383221] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.383222] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.383223] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.383224] x7 : 0000000000000000 x6 : 0000000000000070
[    0.383225] x5 : 00000000a0a0a0a0 x4 : ffffa0260e212000
[    0.383226] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.383227] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.383228] Call trace:
[    0.383230]  its_cpu_init+0x2f0/0x494
[    0.383231]  gic_starting_cpu+0x18/0x24
[    0.383232]  cpuhp_invoke_callback+0x84/0x1e0
[    0.383233]  notify_cpu_starting+0x9c/0xb8
[    0.383235]  secondary_start_kernel+0xdc/0x168
[    0.383236] ---[ end trace f68728a0d3053b5b ]---
[    0.383241] GICv3: CPU9: using allocated LPI pending table 
@0x000000007d290000
[    0.383261] Xen: initializing cpu9
[    0.383269] CPU9: Booted secondary processor 0x0000000009 [0x481fd010]
[    0.412637] Detected VIPT I-cache on CPU10
[    0.412656] GICv3: CPU10: found redistributor a region 
5:0x00000000ae240000
[    0.419341] ------------[ cut here ]------------
[    0.419345] WARNING: CPU: 10 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.419345] Modules linked in:
[    0.419347] CPU: 10 PID: 0 Comm: swapper/10 Tainted: G W         
5.5.0-rc5 #132
[    0.419349] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.419350] pc : its_cpu_init+0x2f0/0x494
[    0.419352] lr : its_cpu_init+0x2ec/0x494
[    0.419352] sp : ffff800011f93ee0
[    0.419353] x29: ffff800011f93ee0 x28: 0000000000000000
[    0.419354] x27: 0000000000000000 x26: 0000000000000000
[    0.419355] x25: 0000000000000000 x24: ffff800012040000
[    0.419357] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.419358] x21: ffff8000117a9000 x20: fffffe0001d4a800
[    0.419358] x19: ffff8000117db000 x18: 0000000000000000
[    0.419359] x17: 0000000000000000 x16: 0000000000000000
[    0.419360] x15: 0000000000000000 x14: 0000000000000000
[    0.419361] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.419362] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.419363] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.419364] x7 : 0000000000000000 x6 : 0000000000000070
[    0.419365] x5 : 00000000a0a0a0a0 x4 : ffffa0260e228000
[    0.419366] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.419367] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.419368] Call trace:
[    0.419370]  its_cpu_init+0x2f0/0x494
[    0.419371]  gic_starting_cpu+0x18/0x24
[    0.419372]  cpuhp_invoke_callback+0x84/0x1e0
[    0.419373]  notify_cpu_starting+0x9c/0xb8
[    0.419375]  secondary_start_kernel+0xdc/0x168
[    0.419376] ---[ end trace f68728a0d3053b5c ]---
[    0.419381] GICv3: CPU10: using allocated LPI pending table 
@0x000000007d2a0000
[    0.419402] Xen: initializing cpu10
[    0.419409] CPU10: Booted secondary processor 0x000000000a [0x481fd010]
[    0.448688] Detected VIPT I-cache on CPU11
[    0.448709] GICv3: CPU11: found redistributor b region 
5:0x00000000ae260000
[    0.455394] ------------[ cut here ]------------
[    0.455397] WARNING: CPU: 11 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.455398] Modules linked in:
[    0.455400] CPU: 11 PID: 0 Comm: swapper/11 Tainted: G W         
5.5.0-rc5 #132
[    0.455401] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.455403] pc : its_cpu_init+0x2f0/0x494
[    0.455404] lr : its_cpu_init+0x2ec/0x494
[    0.455405] sp : ffff800011f9bee0
[    0.455406] x29: ffff800011f9bee0 x28: 0000000000000000
[    0.455407] x27: 0000000000000000 x26: 0000000000000000
[    0.455408] x25: 0000000000000000 x24: ffff800012060000
[    0.455409] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.455410] x21: ffff8000117a9000 x20: fffffe0001d4ac00
[    0.455410] x19: ffff8000117db000 x18: 0000000000000000
[    0.455411] x17: 0000000000000000 x16: 0000000000000000
[    0.455412] x15: 0000000000000000 x14: 0000000000000000
[    0.455413] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.455414] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.455415] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.455416] x7 : 0000000000000000 x6 : 0000000000000070
[    0.455417] x5 : 00000000a0a0a0a0 x4 : ffffa0260e23e000
[    0.455418] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.455419] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.455420] Call trace:
[    0.455421]  its_cpu_init+0x2f0/0x494
[    0.455423]  gic_starting_cpu+0x18/0x24
[    0.455424]  cpuhp_invoke_callback+0x84/0x1e0
[    0.455425]  notify_cpu_starting+0x9c/0xb8
[    0.455426]  secondary_start_kernel+0xdc/0x168
[    0.455427] ---[ end trace f68728a0d3053b5d ]---
[    0.455432] GICv3: CPU11: using allocated LPI pending table 
@0x000000007d2b0000
[    0.455453] Xen: initializing cpu11
[    0.455460] CPU11: Booted secondary processor 0x000000000b [0x481fd010]
[    0.484753] Detected VIPT I-cache on CPU12
[    0.484779] GICv3: CPU12: found redistributor c region 
6:0x00000000ae280000
[    0.491472] ------------[ cut here ]------------
[    0.491477] WARNING: CPU: 12 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.491477] Modules linked in:
[    0.491480] CPU: 12 PID: 0 Comm: swapper/12 Tainted: G W         
5.5.0-rc5 #132
[    0.491482] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.491484] pc : its_cpu_init+0x2f0/0x494
[    0.491485] lr : its_cpu_init+0x2ec/0x494
[    0.491486] sp : ffff800011fa3ee0
[    0.491486] x29: ffff800011fa3ee0 x28: 0000000000000000
[    0.491488] x27: 0000000000000000 x26: 0000000000000000
[    0.491489] x25: 0000000000000000 x24: ffff8000120c0000
[    0.491490] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.491491] x21: ffff8000117a9000 x20: fffffe0001d4b000
[    0.491492] x19: ffff8000117db000 x18: 0000000000000000
[    0.491493] x17: 0000000000000000 x16: 0000000000000000
[    0.491494] x15: 0000000000000000 x14: 0000000000000000
[    0.491495] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.491496] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.491497] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.491498] x7 : 0000000000000000 x6 : 0000000000000070
[    0.491499] x5 : 00000000a0a0a0a0 x4 : ffffa0260e254000
[    0.491500] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.491500] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.491502] Call trace:
[    0.491503]  its_cpu_init+0x2f0/0x494
[    0.491505]  gic_starting_cpu+0x18/0x24
[    0.491506]  cpuhp_invoke_callback+0x84/0x1e0
[    0.491507]  notify_cpu_starting+0x9c/0xb8
[    0.491509]  secondary_start_kernel+0xdc/0x168
[    0.491510] ---[ end trace f68728a0d3053b5e ]---
[    0.491516] GICv3: CPU12: using allocated LPI pending table 
@0x000000007d2c0000
[    0.491542] Xen: initializing cpu12
[    0.491552] CPU12: Booted secondary processor 0x000000000c [0x481fd010]
[    0.520790] Detected VIPT I-cache on CPU13
[    0.520814] GICv3: CPU13: found redistributor d region 
6:0x00000000ae2a0000
[    0.527500] ------------[ cut here ]------------
[    0.527504] WARNING: CPU: 13 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.527504] Modules linked in:
[    0.527506] CPU: 13 PID: 0 Comm: swapper/13 Tainted: G W         
5.5.0-rc5 #132
[    0.527508] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.527510] pc : its_cpu_init+0x2f0/0x494
[    0.527511] lr : its_cpu_init+0x2ec/0x494
[    0.527512] sp : ffff800011fabee0
[    0.527512] x29: ffff800011fabee0 x28: 0000000000000000
[    0.527514] x27: 0000000000000000 x26: 0000000000000000
[    0.527515] x25: 0000000000000000 x24: ffff8000120e0000
[    0.527516] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.527517] x21: ffff8000117a9000 x20: fffffe0001d4b400
[    0.527517] x19: ffff8000117db000 x18: 0000000000000000
[    0.527518] x17: 0000000000000000 x16: 0000000000000000
[    0.527519] x15: 0000000000000000 x14: 0000000000000000
[    0.527520] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.527521] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.527522] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.527523] x7 : 0000000000000000 x6 : 0000000000000070
[    0.527524] x5 : 00000000a0a0a0a0 x4 : ffffa0260e26a000
[    0.527525] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.527526] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.527527] Call trace:
[    0.527529]  its_cpu_init+0x2f0/0x494
[    0.527530]  gic_starting_cpu+0x18/0x24
[    0.527532]  cpuhp_invoke_callback+0x84/0x1e0
[    0.527533]  notify_cpu_starting+0x9c/0xb8
[    0.527534]  secondary_start_kernel+0xdc/0x168
[    0.527535] ---[ end trace f68728a0d3053b5f ]---
[    0.527540] GICv3: CPU13: using allocated LPI pending table 
@0x000000007d2d0000
[    0.527561] Xen: initializing cpu13
[    0.527569] CPU13: Booted secondary processor 0x000000000d [0x481fd010]
[    0.556841] Detected VIPT I-cache on CPU14
[    0.556866] GICv3: CPU14: found redistributor e region 
7:0x00000000ae2c0000
[    0.563552] ------------[ cut here ]------------
[    0.563555] WARNING: CPU: 14 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.563555] Modules linked in:
[    0.563557] CPU: 14 PID: 0 Comm: swapper/14 Tainted: G W         
5.5.0-rc5 #132
[    0.563559] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.563560] pc : its_cpu_init+0x2f0/0x494
[    0.563562] lr : its_cpu_init+0x2ec/0x494
[    0.563562] sp : ffff800011fb3ee0
[    0.563563] x29: ffff800011fb3ee0 x28: 0000000000000000
[    0.563564] x27: 0000000000000000 x26: 0000000000000000
[    0.563565] x25: 0000000000000000 x24: ffff800012140000
[    0.563567] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.563567] x21: ffff8000117a9000 x20: fffffe0001d4b800
[    0.563569] x19: ffff8000117db000 x18: 0000000000000000
[    0.563570] x17: 0000000000000000 x16: 0000000000000000
[    0.563571] x15: 0000000000000000 x14: 0000000000000000
[    0.563572] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.563573] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.563574] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.563575] x7 : 0000000000000000 x6 : 0000000000000070
[    0.563576] x5 : 00000000a0a0a0a0 x4 : ffffa0260e280000
[    0.563577] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.563578] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.563579] Call trace:
[    0.563581]  its_cpu_init+0x2f0/0x494
[    0.563582]  gic_starting_cpu+0x18/0x24
[    0.563583]  cpuhp_invoke_callback+0x84/0x1e0
[    0.563584]  notify_cpu_starting+0x9c/0xb8
[    0.563586]  secondary_start_kernel+0xdc/0x168
[    0.563587] ---[ end trace f68728a0d3053b60 ]---
[    0.563592] GICv3: CPU14: using allocated LPI pending table 
@0x000000007d2e0000
[    0.563613] Xen: initializing cpu14
[    0.563621] CPU14: Booted secondary processor 0x000000000e [0x481fd010]
[    0.592894] Detected VIPT I-cache on CPU15
[    0.592920] GICv3: CPU15: found redistributor f region 
7:0x00000000ae2e0000
[    0.599606] ------------[ cut here ]------------
[    0.599609] WARNING: CPU: 15 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.599609] Modules linked in:
[    0.599612] CPU: 15 PID: 0 Comm: swapper/15 Tainted: G W         
5.5.0-rc5 #132
[    0.599613] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.599614] pc : its_cpu_init+0x2f0/0x494
[    0.599616] lr : its_cpu_init+0x2ec/0x494
[    0.599616] sp : ffff800011fbbee0
[    0.599617] x29: ffff800011fbbee0 x28: 0000000000000000
[    0.599618] x27: 0000000000000000 x26: 0000000000000000
[    0.599619] x25: 0000000000000000 x24: ffff800012160000
[    0.599620] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.599621] x21: ffff8000117a9000 x20: fffffe0001d4bc00
[    0.599622] x19: ffff8000117db000 x18: 0000000000000000
[    0.599623] x17: 0000000000000000 x16: 0000000000000000
[    0.599624] x15: 0000000000000000 x14: 0000000000000000
[    0.599625] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.599626] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.599627] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.599628] x7 : 0000000000000000 x6 : 0000000000000070
[    0.599629] x5 : 00000000a0a0a0a0 x4 : ffffa0260e296000
[    0.599630] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.599630] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.599632] Call trace:
[    0.599633]  its_cpu_init+0x2f0/0x494
[    0.599634]  gic_starting_cpu+0x18/0x24
[    0.599636]  cpuhp_invoke_callback+0x84/0x1e0
[    0.599637]  notify_cpu_starting+0x9c/0xb8
[    0.599638]  secondary_start_kernel+0xdc/0x168
[    0.599639] ---[ end trace f68728a0d3053b61 ]---
[    0.599644] GICv3: CPU15: using allocated LPI pending table 
@0x000000007d2f0000
[    0.599665] Xen: initializing cpu15
[    0.599672] CPU15: Booted secondary processor 0x000000000f [0x481fd010]
[    0.628958] Detected VIPT I-cache on CPU16
[    0.628991] GICv3: CPU16: found redistributor 100 region 
8:0x00000000ae300000
[    0.635683] ------------[ cut here ]------------
[    0.635688] WARNING: CPU: 16 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.635688] Modules linked in:
[    0.635691] CPU: 16 PID: 0 Comm: swapper/16 Tainted: G W         
5.5.0-rc5 #132
[    0.635693] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.635694] pc : its_cpu_init+0x2f0/0x494
[    0.635696] lr : its_cpu_init+0x2ec/0x494
[    0.635696] sp : ffff80001200bee0
[    0.635697] x29: ffff80001200bee0 x28: 0000000000000000
[    0.635698] x27: 0000000000000000 x26: 0000000000000000
[    0.635699] x25: 0000000000000000 x24: ffff8000121c0000
[    0.635701] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.635702] x21: ffff8000117a9000 x20: fffffe0001d4c000
[    0.635703] x19: ffff8000117db000 x18: 0000000000000000
[    0.635704] x17: 0000000000000000 x16: 0000000000000000
[    0.635704] x15: 0000000000000000 x14: 0000000000000000
[    0.635705] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.635706] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.635707] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.635708] x7 : 0000000000000000 x6 : 0000000000000070
[    0.635709] x5 : 00000000a0a0a0a0 x4 : ffffa0260e2ac000
[    0.635710] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.635711] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.635712] Call trace:
[    0.635714]  its_cpu_init+0x2f0/0x494
[    0.635715]  gic_starting_cpu+0x18/0x24
[    0.635717]  cpuhp_invoke_callback+0x84/0x1e0
[    0.635718]  notify_cpu_starting+0x9c/0xb8
[    0.635720]  secondary_start_kernel+0xdc/0x168
[    0.635720] ---[ end trace f68728a0d3053b62 ]---
[    0.635726] GICv3: CPU16: using allocated LPI pending table 
@0x000000007d300000
[    0.635753] Xen: initializing cpu16
[    0.635764] CPU16: Booted secondary processor 0x0000000100 [0x481fd010]
[    0.664996] Detected VIPT I-cache on CPU17
[    0.665025] GICv3: CPU17: found redistributor 101 region 
8:0x00000000ae320000
[    0.671711] ------------[ cut here ]------------
[    0.671714] WARNING: CPU: 17 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.671715] Modules linked in:
[    0.671717] CPU: 17 PID: 0 Comm: swapper/17 Tainted: G W         
5.5.0-rc5 #132
[    0.671719] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.671720] pc : its_cpu_init+0x2f0/0x494
[    0.671722] lr : its_cpu_init+0x2ec/0x494
[    0.671722] sp : ffff800012013ee0
[    0.671723] x29: ffff800012013ee0 x28: 0000000000000000
[    0.671724] x27: 0000000000000000 x26: 0000000000000000
[    0.671725] x25: 0000000000000000 x24: ffff8000121e0000
[    0.671726] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.671727] x21: ffff8000117a9000 x20: fffffe0001d4c400
[    0.671728] x19: ffff8000117db000 x18: 0000000000000000
[    0.671729] x17: 0000000000000000 x16: 0000000000000000
[    0.671730] x15: 0000000000000000 x14: 0000000000000000
[    0.671731] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.671732] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.671733] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.671734] x7 : 0000000000000000 x6 : 0000000000000070
[    0.671735] x5 : 00000000a0a0a0a0 x4 : ffffa0260e2c2000
[    0.671736] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.671737] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.671738] Call trace:
[    0.671739]  its_cpu_init+0x2f0/0x494
[    0.671741]  gic_starting_cpu+0x18/0x24
[    0.671742]  cpuhp_invoke_callback+0x84/0x1e0
[    0.671743]  notify_cpu_starting+0x9c/0xb8
[    0.671745]  secondary_start_kernel+0xdc/0x168
[    0.671746] ---[ end trace f68728a0d3053b63 ]---
[    0.671751] GICv3: CPU17: using allocated LPI pending table 
@0x000000007d310000
[    0.671771] Xen: initializing cpu17
[    0.671780] CPU17: Booted secondary processor 0x0000000101 [0x481fd010]
[    0.701046] Detected VIPT I-cache on CPU18
[    0.701077] GICv3: CPU18: found redistributor 102 region 
9:0x00000000ae340000
[    0.707762] ------------[ cut here ]------------
[    0.707765] WARNING: CPU: 18 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.707766] Modules linked in:
[    0.707768] CPU: 18 PID: 0 Comm: swapper/18 Tainted: G W         
5.5.0-rc5 #132
[    0.707769] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.707771] pc : its_cpu_init+0x2f0/0x494
[    0.707772] lr : its_cpu_init+0x2ec/0x494
[    0.707773] sp : ffff80001201bee0
[    0.707774] x29: ffff80001201bee0 x28: 0000000000000000
[    0.707775] x27: 0000000000000000 x26: 0000000000000000
[    0.707776] x25: 0000000000000000 x24: ffff800012240000
[    0.707777] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.707778] x21: ffff8000117a9000 x20: fffffe0001d4c800
[    0.707779] x19: ffff8000117db000 x18: 0000000000000000
[    0.707780] x17: 0000000000000000 x16: 0000000000000000
[    0.707781] x15: 0000000000000000 x14: 0000000000000000
[    0.707782] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.707783] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.707784] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.707785] x7 : 0000000000000000 x6 : 0000000000000070
[    0.707786] x5 : 00000000a0a0a0a0 x4 : ffffa0260e2d8000
[    0.707787] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.707788] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.707789] Call trace:
[    0.707790]  its_cpu_init+0x2f0/0x494
[    0.707791]  gic_starting_cpu+0x18/0x24
[    0.707793]  cpuhp_invoke_callback+0x84/0x1e0
[    0.707794]  notify_cpu_starting+0x9c/0xb8
[    0.707795]  secondary_start_kernel+0xdc/0x168
[    0.707796] ---[ end trace f68728a0d3053b64 ]---
[    0.707801] GICv3: CPU18: using allocated LPI pending table 
@0x000000007d320000
[    0.707822] Xen: initializing cpu18
[    0.707829] CPU18: Booted secondary processor 0x0000000102 [0x481fd010]
[    0.737099] Detected VIPT I-cache on CPU19
[    0.737131] GICv3: CPU19: found redistributor 103 region 
9:0x00000000ae360000
[    0.743818] ------------[ cut here ]------------
[    0.743821] WARNING: CPU: 19 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.743821] Modules linked in:
[    0.743824] CPU: 19 PID: 0 Comm: swapper/19 Tainted: G W         
5.5.0-rc5 #132
[    0.743825] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.743827] pc : its_cpu_init+0x2f0/0x494
[    0.743828] lr : its_cpu_init+0x2ec/0x494
[    0.743829] sp : ffff800012023ee0
[    0.743829] x29: ffff800012023ee0 x28: 0000000000000000
[    0.743831] x27: 0000000000000000 x26: 0000000000000000
[    0.743832] x25: 0000000000000000 x24: ffff800012260000
[    0.743833] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.743834] x21: ffff8000117a9000 x20: fffffe0001d4cc00
[    0.743835] x19: ffff8000117db000 x18: 0000000000000000
[    0.743836] x17: 0000000000000000 x16: 0000000000000000
[    0.743836] x15: 0000000000000000 x14: 0000000000000000
[    0.743837] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.743838] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.743839] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.743840] x7 : 0000000000000000 x6 : 0000000000000070
[    0.743841] x5 : 00000000a0a0a0a0 x4 : ffffa0260e2ee000
[    0.743842] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.743843] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.743844] Call trace:
[    0.743846]  its_cpu_init+0x2f0/0x494
[    0.743847]  gic_starting_cpu+0x18/0x24
[    0.743848]  cpuhp_invoke_callback+0x84/0x1e0
[    0.743849]  notify_cpu_starting+0x9c/0xb8
[    0.743851]  secondary_start_kernel+0xdc/0x168
[    0.743851] ---[ end trace f68728a0d3053b65 ]---
[    0.743857] GICv3: CPU19: using allocated LPI pending table 
@0x000000007d330000
[    0.743877] Xen: initializing cpu19
[    0.743886] CPU19: Booted secondary processor 0x0000000103 [0x481fd010]
[    0.773165] Detected VIPT I-cache on CPU20
[    0.773204] GICv3: CPU20: found redistributor 104 region 
10:0x00000000ae380000
[    0.779897] ------------[ cut here ]------------
[    0.779902] WARNING: CPU: 20 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.779903] Modules linked in:
[    0.779906] CPU: 20 PID: 0 Comm: swapper/20 Tainted: G W         
5.5.0-rc5 #132
[    0.779907] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.779909] pc : its_cpu_init+0x2f0/0x494
[    0.779910] lr : its_cpu_init+0x2ec/0x494
[    0.779911] sp : ffff80001202bee0
[    0.779911] x29: ffff80001202bee0 x28: 0000000000000000
[    0.779913] x27: 0000000000000000 x26: 0000000000000000
[    0.779914] x25: 0000000000000000 x24: ffff8000122c0000
[    0.779915] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.779916] x21: ffff8000117a9000 x20: fffffe0001d4d000
[    0.779917] x19: ffff8000117db000 x18: 0000000000000000
[    0.779918] x17: 0000000000000000 x16: 0000000000000000
[    0.779919] x15: 0000000000000000 x14: 0000000000000000
[    0.779920] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.779921] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.779922] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.779923] x7 : 0000000000000000 x6 : 0000000000000070
[    0.779924] x5 : 00000000a0a0a0a0 x4 : ffffa0260e304000
[    0.779925] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.779926] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.779928] Call trace:
[    0.779929]  its_cpu_init+0x2f0/0x494
[    0.779931]  gic_starting_cpu+0x18/0x24
[    0.779932]  cpuhp_invoke_callback+0x84/0x1e0
[    0.779933]  notify_cpu_starting+0x9c/0xb8
[    0.779935]  secondary_start_kernel+0xdc/0x168
[    0.779936] ---[ end trace f68728a0d3053b66 ]---
[    0.779941] GICv3: CPU20: using allocated LPI pending table 
@0x000000007d340000
[    0.779968] Xen: initializing cpu20
[    0.779979] CPU20: Booted secondary processor 0x0000000104 [0x481fd010]
[    0.809203] Detected VIPT I-cache on CPU21
[    0.809238] GICv3: CPU21: found redistributor 105 region 
10:0x00000000ae3a0000
[    0.815925] ------------[ cut here ]------------
[    0.815928] WARNING: CPU: 21 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.815929] Modules linked in:
[    0.815931] CPU: 21 PID: 0 Comm: swapper/21 Tainted: G W         
5.5.0-rc5 #132
[    0.815932] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.815934] pc : its_cpu_init+0x2f0/0x494
[    0.815935] lr : its_cpu_init+0x2ec/0x494
[    0.815936] sp : ffff800012033ee0
[    0.815936] x29: ffff800012033ee0 x28: 0000000000000000
[    0.815938] x27: 0000000000000000 x26: 0000000000000000
[    0.815939] x25: 0000000000000000 x24: ffff8000122e0000
[    0.815940] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.815941] x21: ffff8000117a9000 x20: fffffe0001d4d400
[    0.815942] x19: ffff8000117db000 x18: 0000000000000000
[    0.815942] x17: 0000000000000000 x16: 0000000000000000
[    0.815943] x15: 0000000000000000 x14: 0000000000000000
[    0.815944] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.815945] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.815946] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.815947] x7 : 0000000000000000 x6 : 0000000000000070
[    0.815948] x5 : 00000000a0a0a0a0 x4 : ffffa0260e31a000
[    0.815949] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.815950] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.815951] Call trace:
[    0.815953]  its_cpu_init+0x2f0/0x494
[    0.815954]  gic_starting_cpu+0x18/0x24
[    0.815955]  cpuhp_invoke_callback+0x84/0x1e0
[    0.815956]  notify_cpu_starting+0x9c/0xb8
[    0.815958]  secondary_start_kernel+0xdc/0x168
[    0.815958] ---[ end trace f68728a0d3053b67 ]---
[    0.815964] GICv3: CPU21: using allocated LPI pending table 
@0x000000007d350000
[    0.815985] Xen: initializing cpu21
[    0.815993] CPU21: Booted secondary processor 0x0000000105 [0x481fd010]
[    0.845255] Detected VIPT I-cache on CPU22
[    0.845291] GICv3: CPU22: found redistributor 106 region 
11:0x00000000ae3c0000
[    0.851978] ------------[ cut here ]------------
[    0.851982] WARNING: CPU: 22 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.851982] Modules linked in:
[    0.851985] CPU: 22 PID: 0 Comm: swapper/22 Tainted: G W         
5.5.0-rc5 #132
[    0.851986] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.851988] pc : its_cpu_init+0x2f0/0x494
[    0.851989] lr : its_cpu_init+0x2ec/0x494
[    0.851989] sp : ffff80001208bee0
[    0.851990] x29: ffff80001208bee0 x28: 0000000000000000
[    0.851992] x27: 0000000000000000 x26: 0000000000000000
[    0.851993] x25: 0000000000000000 x24: ffff800012340000
[    0.851994] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.851995] x21: ffff8000117a9000 x20: fffffe0001d4d800
[    0.851996] x19: ffff8000117db000 x18: 0000000000000000
[    0.851997] x17: 0000000000000000 x16: 0000000000000000
[    0.851998] x15: 0000000000000000 x14: 0000000000000000
[    0.851999] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.852000] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.852001] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.852001] x7 : 0000000000000000 x6 : 0000000000000070
[    0.852002] x5 : 00000000a0a0a0a0 x4 : ffffa0260e330000
[    0.852003] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.852004] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.852005] Call trace:
[    0.852007]  its_cpu_init+0x2f0/0x494
[    0.852008]  gic_starting_cpu+0x18/0x24
[    0.852010]  cpuhp_invoke_callback+0x84/0x1e0
[    0.852011]  notify_cpu_starting+0x9c/0xb8
[    0.852012]  secondary_start_kernel+0xdc/0x168
[    0.852013] ---[ end trace f68728a0d3053b68 ]---
[    0.852018] GICv3: CPU22: using allocated LPI pending table 
@0x000000007d360000
[    0.852039] Xen: initializing cpu22
[    0.852047] CPU22: Booted secondary processor 0x0000000106 [0x481fd010]
[    0.881308] Detected VIPT I-cache on CPU23
[    0.881345] GICv3: CPU23: found redistributor 107 region 
11:0x00000000ae3e0000
[    0.888031] ------------[ cut here ]------------
[    0.888035] WARNING: CPU: 23 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.888035] Modules linked in:
[    0.888037] CPU: 23 PID: 0 Comm: swapper/23 Tainted: G W         
5.5.0-rc5 #132
[    0.888039] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.888040] pc : its_cpu_init+0x2f0/0x494
[    0.888042] lr : its_cpu_init+0x2ec/0x494
[    0.888043] sp : ffff800012093ee0
[    0.888043] x29: ffff800012093ee0 x28: 0000000000000000
[    0.888044] x27: 0000000000000000 x26: 0000000000000000
[    0.888045] x25: 0000000000000000 x24: ffff800012360000
[    0.888046] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.888047] x21: ffff8000117a9000 x20: fffffe0001d4dc00
[    0.888048] x19: ffff8000117db000 x18: 0000000000000000
[    0.888049] x17: 0000000000000000 x16: 0000000000000000
[    0.888050] x15: 0000000000000000 x14: 0000000000000000
[    0.888051] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.888052] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.888053] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.888054] x7 : 0000000000000000 x6 : 0000000000000070
[    0.888055] x5 : 00000000a0a0a0a0 x4 : ffffa0260e346000
[    0.888056] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.888057] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.888058] Call trace:
[    0.888060]  its_cpu_init+0x2f0/0x494
[    0.888061]  gic_starting_cpu+0x18/0x24
[    0.888063]  cpuhp_invoke_callback+0x84/0x1e0
[    0.888064]  notify_cpu_starting+0x9c/0xb8
[    0.888065]  secondary_start_kernel+0xdc/0x168
[    0.888066] ---[ end trace f68728a0d3053b69 ]---
[    0.888071] GICv3: CPU23: using allocated LPI pending table 
@0x000000007d370000
[    0.888091] Xen: initializing cpu23
[    0.888100] CPU23: Booted secondary processor 0x0000000107 [0x481fd010]
[    0.917374] Detected VIPT I-cache on CPU24
[    0.917417] GICv3: CPU24: found redistributor 108 region 
12:0x00000000ae400000
[    0.924111] ------------[ cut here ]------------
[    0.924115] WARNING: CPU: 24 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.924116] Modules linked in:
[    0.924120] CPU: 24 PID: 0 Comm: swapper/24 Tainted: G W         
5.5.0-rc5 #132
[    0.924121] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.924123] pc : its_cpu_init+0x2f0/0x494
[    0.924124] lr : its_cpu_init+0x2ec/0x494
[    0.924125] sp : ffff80001209bee0
[    0.924125] x29: ffff80001209bee0 x28: 0000000000000000
[    0.924127] x27: 0000000000000000 x26: 0000000000000000
[    0.924128] x25: 0000000000000000 x24: ffff8000123c0000
[    0.924129] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.924130] x21: ffff8000117a9000 x20: fffffe0001d4e000
[    0.924131] x19: ffff8000117db000 x18: 0000000000000000
[    0.924132] x17: 0000000000000000 x16: 0000000000000000
[    0.924133] x15: 0000000000000000 x14: 0000000000000000
[    0.924134] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.924135] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.924136] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.924137] x7 : 0000000000000000 x6 : 0000000000000070
[    0.924138] x5 : 00000000a0a0a0a0 x4 : ffffa0260e35c000
[    0.924139] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.924140] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.924142] Call trace:
[    0.924143]  its_cpu_init+0x2f0/0x494
[    0.924144]  gic_starting_cpu+0x18/0x24
[    0.924146]  cpuhp_invoke_callback+0x84/0x1e0
[    0.924147]  notify_cpu_starting+0x9c/0xb8
[    0.924149]  secondary_start_kernel+0xdc/0x168
[    0.924150] ---[ end trace f68728a0d3053b6a ]---
[    0.924155] GICv3: CPU24: using allocated LPI pending table 
@0x000000007d380000
[    0.924182] Xen: initializing cpu24
[    0.924193] CPU24: Booted secondary processor 0x0000000108 [0x481fd010]
[    0.953413] Detected VIPT I-cache on CPU25
[    0.953453] GICv3: CPU25: found redistributor 109 region 
12:0x00000000ae420000
[    0.960139] ------------[ cut here ]------------
[    0.960142] WARNING: CPU: 25 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.960142] Modules linked in:
[    0.960145] CPU: 25 PID: 0 Comm: swapper/25 Tainted: G W         
5.5.0-rc5 #132
[    0.960146] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.960147] pc : its_cpu_init+0x2f0/0x494
[    0.960149] lr : its_cpu_init+0x2ec/0x494
[    0.960149] sp : ffff8000120a3ee0
[    0.960150] x29: ffff8000120a3ee0 x28: 0000000000000000
[    0.960151] x27: 0000000000000000 x26: 0000000000000000
[    0.960152] x25: 0000000000000000 x24: ffff8000123e0000
[    0.960153] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.960154] x21: ffff8000117a9000 x20: fffffe0001d4e400
[    0.960155] x19: ffff8000117db000 x18: 0000000000000000
[    0.960156] x17: 0000000000000000 x16: 0000000000000000
[    0.960157] x15: 0000000000000000 x14: 0000000000000000
[    0.960158] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.960159] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.960160] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.960161] x7 : 0000000000000000 x6 : 0000000000000070
[    0.960162] x5 : 00000000a0a0a0a0 x4 : ffffa0260e372000
[    0.960163] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.960164] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.960165] Call trace:
[    0.960167]  its_cpu_init+0x2f0/0x494
[    0.960168]  gic_starting_cpu+0x18/0x24
[    0.960169]  cpuhp_invoke_callback+0x84/0x1e0
[    0.960171]  notify_cpu_starting+0x9c/0xb8
[    0.960172]  secondary_start_kernel+0xdc/0x168
[    0.960173] ---[ end trace f68728a0d3053b6b ]---
[    0.960178] GICv3: CPU25: using allocated LPI pending table 
@0x000000007d390000
[    0.960199] Xen: initializing cpu25
[    0.960207] CPU25: Booted secondary processor 0x0000000109 [0x481fd010]
[    0.989464] Detected VIPT I-cache on CPU26
[    0.989504] GICv3: CPU26: found redistributor 10a region 
13:0x00000000ae440000
[    0.996191] ------------[ cut here ]------------
[    0.996194] WARNING: CPU: 26 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    0.996195] Modules linked in:
[    0.996197] CPU: 26 PID: 0 Comm: swapper/26 Tainted: G W         
5.5.0-rc5 #132
[    0.996198] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    0.996200] pc : its_cpu_init+0x2f0/0x494
[    0.996201] lr : its_cpu_init+0x2ec/0x494
[    0.996201] sp : ffff8000120abee0
[    0.996202] x29: ffff8000120abee0 x28: 0000000000000000
[    0.996204] x27: 0000000000000000 x26: 0000000000000000
[    0.996205] x25: 0000000000000000 x24: ffff800012440000
[    0.996206] x23: ffff8000111f4000 x22: ffff8000119cd000
[    0.996207] x21: ffff8000117a9000 x20: fffffe0001d4e800
[    0.996207] x19: ffff8000117db000 x18: 0000000000000000
[    0.996208] x17: 0000000000000000 x16: 0000000000000000
[    0.996209] x15: 0000000000000000 x14: 0000000000000000
[    0.996210] x13: 0000000000000000 x12: f4e33ba569c0a400
[    0.996211] x11: ffffffffffffffff x10: ffff8000119916a0
[    0.996212] x9 : 0000000000000000 x8 : ffff8000119916a0
[    0.996213] x7 : 0000000000000000 x6 : 0000000000000070
[    0.996214] x5 : 00000000a0a0a0a0 x4 : ffffa0260e388000
[    0.996215] x3 : 000000000000003d x2 : ffffffffffffffff
[    0.996216] x1 : 0000000000010000 x0 : 00000000ffffffed
[    0.996217] Call trace:
[    0.996219]  its_cpu_init+0x2f0/0x494
[    0.996220]  gic_starting_cpu+0x18/0x24
[    0.996221]  cpuhp_invoke_callback+0x84/0x1e0
[    0.996222]  notify_cpu_starting+0x9c/0xb8
[    0.996224]  secondary_start_kernel+0xdc/0x168
[    0.996225] ---[ end trace f68728a0d3053b6c ]---
[    0.996230] GICv3: CPU26: using allocated LPI pending table 
@0x000000007d3a0000
[    0.996250] Xen: initializing cpu26
[    0.996259] CPU26: Booted secondary processor 0x000000010a [0x481fd010]
[    1.025517] Detected VIPT I-cache on CPU27
[    1.025559] GICv3: CPU27: found redistributor 10b region 
13:0x00000000ae460000
[    1.032246] ------------[ cut here ]------------
[    1.032250] WARNING: CPU: 27 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.032250] Modules linked in:
[    1.032252] CPU: 27 PID: 0 Comm: swapper/27 Tainted: G W         
5.5.0-rc5 #132
[    1.032254] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.032255] pc : its_cpu_init+0x2f0/0x494
[    1.032257] lr : its_cpu_init+0x2ec/0x494
[    1.032257] sp : ffff8000120b3ee0
[    1.032258] x29: ffff8000120b3ee0 x28: 0000000000000000
[    1.032259] x27: 0000000000000000 x26: 0000000000000000
[    1.032260] x25: 0000000000000000 x24: ffff800012460000
[    1.032261] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.032262] x21: ffff8000117a9000 x20: fffffe0001d4ec00
[    1.032263] x19: ffff8000117db000 x18: 0000000000000000
[    1.032264] x17: 0000000000000000 x16: 0000000000000000
[    1.032265] x15: 0000000000000000 x14: 0000000000000000
[    1.032266] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.032267] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.032268] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.032269] x7 : 0000000000000000 x6 : 0000000000000070
[    1.032270] x5 : 00000000a0a0a0a0 x4 : ffffa0260e39e000
[    1.032271] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.032271] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.032273] Call trace:
[    1.032274]  its_cpu_init+0x2f0/0x494
[    1.032275]  gic_starting_cpu+0x18/0x24
[    1.032277]  cpuhp_invoke_callback+0x84/0x1e0
[    1.032278]  notify_cpu_starting+0x9c/0xb8
[    1.032279]  secondary_start_kernel+0xdc/0x168
[    1.032280] ---[ end trace f68728a0d3053b6d ]---
[    1.032285] GICv3: CPU27: using allocated LPI pending table 
@0x000000007d3b0000
[    1.032306] Xen: initializing cpu27
[    1.032314] CPU27: Booted secondary processor 0x000000010b [0x481fd010]
[    1.061582] Detected VIPT I-cache on CPU28
[    1.061631] GICv3: CPU28: found redistributor 10c region 
14:0x00000000ae480000
[    1.068326] ------------[ cut here ]------------
[    1.068331] WARNING: CPU: 28 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.068331] Modules linked in:
[    1.068334] CPU: 28 PID: 0 Comm: swapper/28 Tainted: G W         
5.5.0-rc5 #132
[    1.068336] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.068337] pc : its_cpu_init+0x2f0/0x494
[    1.068339] lr : its_cpu_init+0x2ec/0x494
[    1.068339] sp : ffff8000120bbee0
[    1.068340] x29: ffff8000120bbee0 x28: 0000000000000000
[    1.068342] x27: 0000000000000000 x26: 0000000000000000
[    1.068343] x25: 0000000000000000 x24: ffff8000124c0000
[    1.068344] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.068345] x21: ffff8000117a9000 x20: fffffe0001d4f000
[    1.068346] x19: ffff8000117db000 x18: 0000000000000000
[    1.068347] x17: 0000000000000000 x16: 0000000000000000
[    1.068348] x15: 0000000000000000 x14: 0000000000000000
[    1.068349] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.068350] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.068351] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.068351] x7 : 0000000000000000 x6 : 0000000000000070
[    1.068352] x5 : 00000000a0a0a0a0 x4 : ffffa0260e3b4000
[    1.068353] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.068354] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.068356] Call trace:
[    1.068357]  its_cpu_init+0x2f0/0x494
[    1.068359]  gic_starting_cpu+0x18/0x24
[    1.068360]  cpuhp_invoke_callback+0x84/0x1e0
[    1.068361]  notify_cpu_starting+0x9c/0xb8
[    1.068363]  secondary_start_kernel+0xdc/0x168
[    1.068364] ---[ end trace f68728a0d3053b6e ]---
[    1.068370] GICv3: CPU28: using allocated LPI pending table 
@0x000000007d3c0000
[    1.068397] Xen: initializing cpu28
[    1.068409] CPU28: Booted secondary processor 0x000000010c [0x481fd010]
[    1.097623] Detected VIPT I-cache on CPU29
[    1.097669] GICv3: CPU29: found redistributor 10d region 
14:0x00000000ae4a0000
[    1.104356] ------------[ cut here ]------------
[    1.104359] WARNING: CPU: 29 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.104360] Modules linked in:
[    1.104362] CPU: 29 PID: 0 Comm: swapper/29 Tainted: G W         
5.5.0-rc5 #132
[    1.104364] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.104365] pc : its_cpu_init+0x2f0/0x494
[    1.104367] lr : its_cpu_init+0x2ec/0x494
[    1.104367] sp : ffff80001210bee0
[    1.104368] x29: ffff80001210bee0 x28: 0000000000000000
[    1.104369] x27: 0000000000000000 x26: 0000000000000000
[    1.104370] x25: 0000000000000000 x24: ffff8000124e0000
[    1.104371] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.104372] x21: ffff8000117a9000 x20: fffffe0001d4f400
[    1.104373] x19: ffff8000117db000 x18: 0000000000000000
[    1.104374] x17: 0000000000000000 x16: 0000000000000000
[    1.104375] x15: 0000000000000000 x14: 0000000000000000
[    1.104376] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.104377] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.104378] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.104379] x7 : 0000000000000000 x6 : 0000000000000070
[    1.104380] x5 : 00000000a0a0a0a0 x4 : ffffa0260e3ca000
[    1.104381] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.104382] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.104383] Call trace:
[    1.104384]  its_cpu_init+0x2f0/0x494
[    1.104386]  gic_starting_cpu+0x18/0x24
[    1.104387]  cpuhp_invoke_callback+0x84/0x1e0
[    1.104388]  notify_cpu_starting+0x9c/0xb8
[    1.104390]  secondary_start_kernel+0xdc/0x168
[    1.104390] ---[ end trace f68728a0d3053b6f ]---
[    1.104396] GICv3: CPU29: using allocated LPI pending table 
@0x000000007d3d0000
[    1.104417] Xen: initializing cpu29
[    1.104426] CPU29: Booted secondary processor 0x000000010d [0x481fd010]
[    1.133690] Detected VIPT I-cache on CPU30
[    1.133737] GICv3: CPU30: found redistributor 10e region 
15:0x00000000ae4c0000
[    1.140423] ------------[ cut here ]------------
[    1.140427] WARNING: CPU: 30 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.140427] Modules linked in:
[    1.140430] CPU: 30 PID: 0 Comm: swapper/30 Tainted: G W         
5.5.0-rc5 #132
[    1.140431] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.140433] pc : its_cpu_init+0x2f0/0x494
[    1.140434] lr : its_cpu_init+0x2ec/0x494
[    1.140435] sp : ffff800012113ee0
[    1.140435] x29: ffff800012113ee0 x28: 0000000000000000
[    1.140437] x27: 0000000000000000 x26: 0000000000000000
[    1.140438] x25: 0000000000000000 x24: ffff800012540000
[    1.140439] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.140440] x21: ffff8000117a9000 x20: fffffe0001d4f800
[    1.140441] x19: ffff8000117db000 x18: 0000000000000000
[    1.140442] x17: 0000000000000000 x16: 0000000000000000
[    1.140443] x15: 0000000000000000 x14: 0000000000000000
[    1.140444] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.140445] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.140446] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.140447] x7 : 0000000000000000 x6 : 0000000000000070
[    1.140448] x5 : 00000000a0a0a0a0 x4 : ffffa0260e3e0000
[    1.140449] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.140450] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.140451] Call trace:
[    1.140453]  its_cpu_init+0x2f0/0x494
[    1.140454]  gic_starting_cpu+0x18/0x24
[    1.140455]  cpuhp_invoke_callback+0x84/0x1e0
[    1.140457]  notify_cpu_starting+0x9c/0xb8
[    1.140458]  secondary_start_kernel+0xdc/0x168
[    1.140459] ---[ end trace f68728a0d3053b70 ]---
[    1.140464] GICv3: CPU30: using allocated LPI pending table 
@0x000000007d3e0000
[    1.140485] Xen: initializing cpu30
[    1.140493] CPU30: Booted secondary processor 0x000000010e [0x481fd010]
[    1.169742] Detected VIPT I-cache on CPU31
[    1.169789] GICv3: CPU31: found redistributor 10f region 
15:0x00000000ae4e0000
[    1.176476] ------------[ cut here ]------------
[    1.176479] WARNING: CPU: 31 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.176479] Modules linked in:
[    1.176482] CPU: 31 PID: 0 Comm: swapper/31 Tainted: G W         
5.5.0-rc5 #132
[    1.176483] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.176484] pc : its_cpu_init+0x2f0/0x494
[    1.176486] lr : its_cpu_init+0x2ec/0x494
[    1.176486] sp : ffff80001211bee0
[    1.176487] x29: ffff80001211bee0 x28: 0000000000000000
[    1.176488] x27: 0000000000000000 x26: 0000000000000000
[    1.176489] x25: 0000000000000000 x24: ffff800012560000
[    1.176490] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.176491] x21: ffff8000117a9000 x20: fffffe0001d4fc00
[    1.176492] x19: ffff8000117db000 x18: 0000000000000000
[    1.176493] x17: 0000000000000000 x16: 0000000000000000
[    1.176494] x15: 0000000000000000 x14: 0000000000000000
[    1.176495] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.176496] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.176497] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.176498] x7 : 0000000000000000 x6 : 0000000000000070
[    1.176499] x5 : 00000000a0a0a0a0 x4 : ffffa0260e3f6000
[    1.176500] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.176501] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.176502] Call trace:
[    1.176503]  its_cpu_init+0x2f0/0x494
[    1.176505]  gic_starting_cpu+0x18/0x24
[    1.176506]  cpuhp_invoke_callback+0x84/0x1e0
[    1.176507]  notify_cpu_starting+0x9c/0xb8
[    1.176509]  secondary_start_kernel+0xdc/0x168
[    1.176509] ---[ end trace f68728a0d3053b71 ]---
[    1.176514] GICv3: CPU31: using allocated LPI pending table 
@0x000000007d3f0000
[    1.176534] Xen: initializing cpu31
[    1.176544] CPU31: Booted secondary processor 0x000000010f [0x481fd010]
[    1.205819] Detected VIPT I-cache on CPU32
[    1.205894] GICv3: CPU32: found redistributor 200 region 
16:0x00000000ae500000
[    1.212602] ------------[ cut here ]------------
[    1.212607] WARNING: CPU: 32 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.212608] Modules linked in:
[    1.212612] CPU: 32 PID: 0 Comm: swapper/32 Tainted: G W         
5.5.0-rc5 #132
[    1.212614] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.212615] pc : its_cpu_init+0x2f0/0x494
[    1.212617] lr : its_cpu_init+0x2ec/0x494
[    1.212617] sp : ffff800012123ee0
[    1.212618] x29: ffff800012123ee0 x28: 0000000000000000
[    1.212619] x27: 0000000000000000 x26: 0000000000000000
[    1.212620] x25: 0000000000000000 x24: ffff8000125c0000
[    1.212621] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.212622] x21: ffff8000117a9000 x20: fffffe0001cb0000
[    1.212623] x19: ffff8000117db000 x18: 0000000000000000
[    1.212624] x17: 0000000000000000 x16: 0000000000000000
[    1.212625] x15: 0000000000000000 x14: 0000000000000000
[    1.212626] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.212627] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.212628] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.212629] x7 : 0000000000000000 x6 : 0000000000000070
[    1.212630] x5 : 00000000a0a0a0a0 x4 : ffff80006c961000
[    1.212631] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.212632] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.212633] Call trace:
[    1.212635]  its_cpu_init+0x2f0/0x494
[    1.212636]  gic_starting_cpu+0x18/0x24
[    1.212638]  cpuhp_invoke_callback+0x84/0x1e0
[    1.212639]  notify_cpu_starting+0x9c/0xb8
[    1.212641]  secondary_start_kernel+0xdc/0x168
[    1.212642] ---[ end trace f68728a0d3053b72 ]---
[    1.212648] GICv3: CPU32: using allocated LPI pending table 
@0x000000007ac00000
[    1.212684] Xen: initializing cpu32
[    1.212698] CPU32: Booted secondary processor 0x0000000200 [0x481fd010]
[    1.241877] Detected VIPT I-cache on CPU33
[    1.241935] GICv3: CPU33: found redistributor 201 region 
16:0x00000000ae520000
[    1.248626] ------------[ cut here ]------------
[    1.248630] WARNING: CPU: 33 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.248630] Modules linked in:
[    1.248633] CPU: 33 PID: 0 Comm: swapper/33 Tainted: G W         
5.5.0-rc5 #132
[    1.248634] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.248635] pc : its_cpu_init+0x2f0/0x494
[    1.248637] lr : its_cpu_init+0x2ec/0x494
[    1.248638] sp : ffff80001212bee0
[    1.248638] x29: ffff80001212bee0 x28: 0000000000000000
[    1.248639] x27: 0000000000000000 x26: 0000000000000000
[    1.248640] x25: 0000000000000000 x24: ffff8000125e0000
[    1.248641] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.248642] x21: ffff8000117a9000 x20: fffffe0001cb0400
[    1.248643] x19: ffff8000117db000 x18: 0000000000000000
[    1.248644] x17: 0000000000000000 x16: 0000000000000000
[    1.248645] x15: 0000000000000000 x14: 0000000000000000
[    1.248646] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.248647] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.248648] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.248649] x7 : 0000000000000000 x6 : 0000000000000070
[    1.248650] x5 : 00000000a0a0a0a0 x4 : ffff80006c977000
[    1.248651] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.248652] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.248653] Call trace:
[    1.248654]  its_cpu_init+0x2f0/0x494
[    1.248655]  gic_starting_cpu+0x18/0x24
[    1.248657]  cpuhp_invoke_callback+0x84/0x1e0
[    1.248658]  notify_cpu_starting+0x9c/0xb8
[    1.248659]  secondary_start_kernel+0xdc/0x168
[    1.248660] ---[ end trace f68728a0d3053b73 ]---
[    1.248666] GICv3: CPU33: using allocated LPI pending table 
@0x000000007ac10000
[    1.248687] Xen: initializing cpu33
[    1.248696] CPU33: Booted secondary processor 0x0000000201 [0x481fd010]
[    1.277952] Detected VIPT I-cache on CPU34
[    1.278011] GICv3: CPU34: found redistributor 202 region 
17:0x00000000ae540000
[    1.284701] ------------[ cut here ]------------
[    1.284704] WARNING: CPU: 34 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.284704] Modules linked in:
[    1.284706] CPU: 34 PID: 0 Comm: swapper/34 Tainted: G W         
5.5.0-rc5 #132
[    1.284708] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.284710] pc : its_cpu_init+0x2f0/0x494
[    1.284711] lr : its_cpu_init+0x2ec/0x494
[    1.284711] sp : ffff800012133ee0
[    1.284712] x29: ffff800012133ee0 x28: 0000000000000000
[    1.284713] x27: 0000000000000000 x26: 0000000000000000
[    1.284714] x25: 0000000000000000 x24: ffff800012640000
[    1.284715] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.284716] x21: ffff8000117a9000 x20: fffffe0001cb0800
[    1.284718] x19: ffff8000117db000 x18: 0000000000000000
[    1.284719] x17: 0000000000000000 x16: 0000000000000000
[    1.284719] x15: 0000000000000000 x14: 0000000000000000
[    1.284721] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.284722] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.284723] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.284724] x7 : 0000000000000000 x6 : 0000000000000070
[    1.284724] x5 : 00000000a0a0a0a0 x4 : ffff80006c98d000
[    1.284725] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.284726] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.284727] Call trace:
[    1.284729]  its_cpu_init+0x2f0/0x494
[    1.284730]  gic_starting_cpu+0x18/0x24
[    1.284731]  cpuhp_invoke_callback+0x84/0x1e0
[    1.284732]  notify_cpu_starting+0x9c/0xb8
[    1.284734]  secondary_start_kernel+0xdc/0x168
[    1.284735] ---[ end trace f68728a0d3053b74 ]---
[    1.284740] GICv3: CPU34: using allocated LPI pending table 
@0x000000007ac20000
[    1.284761] Xen: initializing cpu34
[    1.284770] CPU34: Booted secondary processor 0x0000000202 [0x481fd010]
[    1.314026] Detected VIPT I-cache on CPU35
[    1.314087] GICv3: CPU35: found redistributor 203 region 
17:0x00000000ae560000
[    1.320776] ------------[ cut here ]------------
[    1.320779] WARNING: CPU: 35 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.320779] Modules linked in:
[    1.320782] CPU: 35 PID: 0 Comm: swapper/35 Tainted: G W         
5.5.0-rc5 #132
[    1.320783] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.320784] pc : its_cpu_init+0x2f0/0x494
[    1.320786] lr : its_cpu_init+0x2ec/0x494
[    1.320786] sp : ffff80001218bee0
[    1.320787] x29: ffff80001218bee0 x28: 0000000000000000
[    1.320788] x27: 0000000000000000 x26: 0000000000000000
[    1.320789] x25: 0000000000000000 x24: ffff800012660000
[    1.320790] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.320791] x21: ffff8000117a9000 x20: fffffe0001cb0c00
[    1.320792] x19: ffff8000117db000 x18: 0000000000000000
[    1.320793] x17: 0000000000000000 x16: 0000000000000000
[    1.320794] x15: 0000000000000000 x14: 0000000000000000
[    1.320795] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.320796] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.320797] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.320798] x7 : 0000000000000000 x6 : 0000000000000070
[    1.320799] x5 : 00000000a0a0a0a0 x4 : ffff80006c9a3000
[    1.320800] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.320801] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.320802] Call trace:
[    1.320804]  its_cpu_init+0x2f0/0x494
[    1.320805]  gic_starting_cpu+0x18/0x24
[    1.320806]  cpuhp_invoke_callback+0x84/0x1e0
[    1.320807]  notify_cpu_starting+0x9c/0xb8
[    1.320809]  secondary_start_kernel+0xdc/0x168
[    1.320809] ---[ end trace f68728a0d3053b75 ]---
[    1.320814] GICv3: CPU35: using allocated LPI pending table 
@0x000000007ac30000
[    1.320835] Xen: initializing cpu35
[    1.320844] CPU35: Booted secondary processor 0x0000000203 [0x481fd010]
[    1.350106] Detected VIPT I-cache on CPU36
[    1.350176] GICv3: CPU36: found redistributor 204 region 
18:0x00000000ae580000
[    1.356871] ------------[ cut here ]------------
[    1.356876] WARNING: CPU: 36 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.356877] Modules linked in:
[    1.356879] CPU: 36 PID: 0 Comm: swapper/36 Tainted: G W         
5.5.0-rc5 #132
[    1.356881] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.356882] pc : its_cpu_init+0x2f0/0x494
[    1.356884] lr : its_cpu_init+0x2ec/0x494
[    1.356884] sp : ffff800012193ee0
[    1.356885] x29: ffff800012193ee0 x28: 0000000000000000
[    1.356886] x27: 0000000000000000 x26: 0000000000000000
[    1.356887] x25: 0000000000000000 x24: ffff8000126c0000
[    1.356889] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.356890] x21: ffff8000117a9000 x20: fffffe0001cb1000
[    1.356891] x19: ffff8000117db000 x18: 0000000000000000
[    1.356892] x17: 0000000000000000 x16: 0000000000000000
[    1.356893] x15: 0000000000000000 x14: 0000000000000000
[    1.356894] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.356895] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.356896] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.356897] x7 : 0000000000000000 x6 : 0000000000000070
[    1.356898] x5 : 00000000a0a0a0a0 x4 : ffff80006c9b9000
[    1.356899] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.356900] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.356901] Call trace:
[    1.356903]  its_cpu_init+0x2f0/0x494
[    1.356904]  gic_starting_cpu+0x18/0x24
[    1.356906]  cpuhp_invoke_callback+0x84/0x1e0
[    1.356907]  notify_cpu_starting+0x9c/0xb8
[    1.356909]  secondary_start_kernel+0xdc/0x168
[    1.356910] ---[ end trace f68728a0d3053b76 ]---
[    1.356916] GICv3: CPU36: using allocated LPI pending table 
@0x000000007ac40000
[    1.356944] Xen: initializing cpu36
[    1.356956] CPU36: Booted secondary processor 0x0000000204 [0x481fd010]
[    1.386173] Detected VIPT I-cache on CPU37
[    1.386237] GICv3: CPU37: found redistributor 205 region 
18:0x00000000ae5a0000
[    1.392928] ------------[ cut here ]------------
[    1.392931] WARNING: CPU: 37 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.392932] Modules linked in:
[    1.392934] CPU: 37 PID: 0 Comm: swapper/37 Tainted: G W         
5.5.0-rc5 #132
[    1.392935] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.392937] pc : its_cpu_init+0x2f0/0x494
[    1.392938] lr : its_cpu_init+0x2ec/0x494
[    1.392939] sp : ffff80001219bee0
[    1.392939] x29: ffff80001219bee0 x28: 0000000000000000
[    1.392941] x27: 0000000000000000 x26: 0000000000000000
[    1.392942] x25: 0000000000000000 x24: ffff8000126e0000
[    1.392943] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.392944] x21: ffff8000117a9000 x20: fffffe0001cb1400
[    1.392944] x19: ffff8000117db000 x18: 0000000000000000
[    1.392945] x17: 0000000000000000 x16: 0000000000000000
[    1.392946] x15: 0000000000000000 x14: 0000000000000000
[    1.392947] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.392948] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.392949] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.392950] x7 : 0000000000000000 x6 : 0000000000000070
[    1.392951] x5 : 00000000a0a0a0a0 x4 : ffff80006c9cf000
[    1.392952] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.392953] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.392954] Call trace:
[    1.392956]  its_cpu_init+0x2f0/0x494
[    1.392957]  gic_starting_cpu+0x18/0x24
[    1.392958]  cpuhp_invoke_callback+0x84/0x1e0
[    1.392959]  notify_cpu_starting+0x9c/0xb8
[    1.392961]  secondary_start_kernel+0xdc/0x168
[    1.392961] ---[ end trace f68728a0d3053b77 ]---
[    1.392967] GICv3: CPU37: using allocated LPI pending table 
@0x000000007ac50000
[    1.392988] Xen: initializing cpu37
[    1.392998] CPU37: Booted secondary processor 0x0000000205 [0x481fd010]
[    1.422247] Detected VIPT I-cache on CPU38
[    1.422314] GICv3: CPU38: found redistributor 206 region 
19:0x00000000ae5c0000
[    1.429005] ------------[ cut here ]------------
[    1.429008] WARNING: CPU: 38 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.429009] Modules linked in:
[    1.429011] CPU: 38 PID: 0 Comm: swapper/38 Tainted: G W         
5.5.0-rc5 #132
[    1.429012] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.429014] pc : its_cpu_init+0x2f0/0x494
[    1.429015] lr : its_cpu_init+0x2ec/0x494
[    1.429016] sp : ffff8000121a3ee0
[    1.429016] x29: ffff8000121a3ee0 x28: 0000000000000000
[    1.429017] x27: 0000000000000000 x26: 0000000000000000
[    1.429019] x25: 0000000000000000 x24: ffff800012740000
[    1.429020] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.429021] x21: ffff8000117a9000 x20: fffffe0001cb1800
[    1.429022] x19: ffff8000117db000 x18: 0000000000000000
[    1.429023] x17: 0000000000000000 x16: 0000000000000000
[    1.429023] x15: 0000000000000000 x14: 0000000000000000
[    1.429024] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.429025] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.429026] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.429027] x7 : 0000000000000000 x6 : 0000000000000070
[    1.429028] x5 : 00000000a0a0a0a0 x4 : ffff80006c9e5000
[    1.429029] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.429030] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.429031] Call trace:
[    1.429032]  its_cpu_init+0x2f0/0x494
[    1.429034]  gic_starting_cpu+0x18/0x24
[    1.429035]  cpuhp_invoke_callback+0x84/0x1e0
[    1.429036]  notify_cpu_starting+0x9c/0xb8
[    1.429038]  secondary_start_kernel+0xdc/0x168
[    1.429038] ---[ end trace f68728a0d3053b78 ]---
[    1.429044] GICv3: CPU38: using allocated LPI pending table 
@0x000000007ac60000
[    1.429067] Xen: initializing cpu38
[    1.429077] CPU38: Booted secondary processor 0x0000000206 [0x481fd010]
[    1.458324] Detected VIPT I-cache on CPU39
[    1.458390] GICv3: CPU39: found redistributor 207 region 
19:0x00000000ae5e0000
[    1.465081] ------------[ cut here ]------------
[    1.465084] WARNING: CPU: 39 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.465085] Modules linked in:
[    1.465087] CPU: 39 PID: 0 Comm: swapper/39 Tainted: G W         
5.5.0-rc5 #132
[    1.465088] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.465090] pc : its_cpu_init+0x2f0/0x494
[    1.465091] lr : its_cpu_init+0x2ec/0x494
[    1.465092] sp : ffff8000121abee0
[    1.465092] x29: ffff8000121abee0 x28: 0000000000000000
[    1.465093] x27: 0000000000000000 x26: 0000000000000000
[    1.465094] x25: 0000000000000000 x24: ffff800012760000
[    1.465095] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.465097] x21: ffff8000117a9000 x20: fffffe0001cb1c00
[    1.465098] x19: ffff8000117db000 x18: 0000000000000000
[    1.465099] x17: 0000000000000000 x16: 0000000000000000
[    1.465100] x15: 0000000000000000 x14: 0000000000000000
[    1.465101] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.465102] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.465102] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.465103] x7 : 0000000000000000 x6 : 0000000000000070
[    1.465104] x5 : 00000000a0a0a0a0 x4 : ffff80006c9fb000
[    1.465105] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.465106] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.465107] Call trace:
[    1.465109]  its_cpu_init+0x2f0/0x494
[    1.465110]  gic_starting_cpu+0x18/0x24
[    1.465111]  cpuhp_invoke_callback+0x84/0x1e0
[    1.465112]  notify_cpu_starting+0x9c/0xb8
[    1.465114]  secondary_start_kernel+0xdc/0x168
[    1.465114] ---[ end trace f68728a0d3053b79 ]---
[    1.465120] GICv3: CPU39: using allocated LPI pending table 
@0x000000007ac70000
[    1.465142] Xen: initializing cpu39
[    1.465151] CPU39: Booted secondary processor 0x0000000207 [0x481fd010]
[    1.494404] Detected VIPT I-cache on CPU40
[    1.494477] GICv3: CPU40: found redistributor 208 region 
20:0x00000000ae600000
[    1.501169] ------------[ cut here ]------------
[    1.501173] WARNING: CPU: 40 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.501174] Modules linked in:
[    1.501177] CPU: 40 PID: 0 Comm: swapper/40 Tainted: G W         
5.5.0-rc5 #132
[    1.501178] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.501180] pc : its_cpu_init+0x2f0/0x494
[    1.501181] lr : its_cpu_init+0x2ec/0x494
[    1.501182] sp : ffff8000121b3ee0
[    1.501183] x29: ffff8000121b3ee0 x28: 0000000000000000
[    1.501184] x27: 0000000000000000 x26: 0000000000000000
[    1.501185] x25: 0000000000000000 x24: ffff8000127c0000
[    1.501186] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.501187] x21: ffff8000117a9000 x20: fffffe0001cb2000
[    1.501188] x19: ffff8000117db000 x18: 0000000000000000
[    1.501189] x17: 0000000000000000 x16: 0000000000000000
[    1.501190] x15: 0000000000000000 x14: 0000000000000000
[    1.501190] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.501191] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.501192] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.501193] x7 : 0000000000000000 x6 : 0000000000000070
[    1.501194] x5 : 00000000a0a0a0a0 x4 : ffff80006ca11000
[    1.501195] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.501196] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.501197] Call trace:
[    1.501199]  its_cpu_init+0x2f0/0x494
[    1.501200]  gic_starting_cpu+0x18/0x24
[    1.501202]  cpuhp_invoke_callback+0x84/0x1e0
[    1.501203]  notify_cpu_starting+0x9c/0xb8
[    1.501204]  secondary_start_kernel+0xdc/0x168
[    1.501205] ---[ end trace f68728a0d3053b7a ]---
[    1.501211] GICv3: CPU40: using allocated LPI pending table 
@0x000000007ac80000
[    1.501237] Xen: initializing cpu40
[    1.501248] CPU40: Booted secondary processor 0x0000000208 [0x481fd010]
[    1.530473] Detected VIPT I-cache on CPU41
[    1.530541] GICv3: CPU41: found redistributor 209 region 
20:0x00000000ae620000
[    1.537232] ------------[ cut here ]------------
[    1.537235] WARNING: CPU: 41 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.537235] Modules linked in:
[    1.537238] CPU: 41 PID: 0 Comm: swapper/41 Tainted: G W         
5.5.0-rc5 #132
[    1.537239] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.537240] pc : its_cpu_init+0x2f0/0x494
[    1.537242] lr : its_cpu_init+0x2ec/0x494
[    1.537242] sp : ffff8000121bbee0
[    1.537243] x29: ffff8000121bbee0 x28: 0000000000000000
[    1.537244] x27: 0000000000000000 x26: 0000000000000000
[    1.537245] x25: 0000000000000000 x24: ffff8000127e0000
[    1.537246] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.537247] x21: ffff8000117a9000 x20: fffffe0001cb2400
[    1.537248] x19: ffff8000117db000 x18: 0000000000000000
[    1.537250] x17: 0000000000000000 x16: 0000000000000000
[    1.537250] x15: 0000000000000000 x14: 0000000000000000
[    1.537252] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.537253] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.537254] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.537255] x7 : 0000000000000000 x6 : 0000000000000070
[    1.537255] x5 : 00000000a0a0a0a0 x4 : ffff80006ca27000
[    1.537257] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.537258] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.537259] Call trace:
[    1.537260]  its_cpu_init+0x2f0/0x494
[    1.537261]  gic_starting_cpu+0x18/0x24
[    1.537263]  cpuhp_invoke_callback+0x84/0x1e0
[    1.537264]  notify_cpu_starting+0x9c/0xb8
[    1.537265]  secondary_start_kernel+0xdc/0x168
[    1.537266] ---[ end trace f68728a0d3053b7b ]---
[    1.537272] GICv3: CPU41: using allocated LPI pending table 
@0x000000007ac90000
[    1.537294] Xen: initializing cpu41
[    1.537302] CPU41: Booted secondary processor 0x0000000209 [0x481fd010]
[    1.566547] Detected VIPT I-cache on CPU42
[    1.566619] GICv3: CPU42: found redistributor 20a region 
21:0x00000000ae640000
[    1.573308] ------------[ cut here ]------------
[    1.573312] WARNING: CPU: 42 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.573312] Modules linked in:
[    1.573314] CPU: 42 PID: 0 Comm: swapper/42 Tainted: G W         
5.5.0-rc5 #132
[    1.573316] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.573317] pc : its_cpu_init+0x2f0/0x494
[    1.573319] lr : its_cpu_init+0x2ec/0x494
[    1.573319] sp : ffff80001220bee0
[    1.573320] x29: ffff80001220bee0 x28: 0000000000000000
[    1.573321] x27: 0000000000000000 x26: 0000000000000000
[    1.573322] x25: 0000000000000000 x24: ffff800012840000
[    1.573323] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.573324] x21: ffff8000117a9000 x20: fffffe0001cb2800
[    1.573325] x19: ffff8000117db000 x18: 0000000000000000
[    1.573326] x17: 0000000000000000 x16: 0000000000000000
[    1.573327] x15: 0000000000000000 x14: 0000000000000000
[    1.573328] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.573328] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.573329] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.573330] x7 : 0000000000000000 x6 : 0000000000000070
[    1.573331] x5 : 00000000a0a0a0a0 x4 : ffff80006ca3d000
[    1.573332] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.573333] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.573334] Call trace:
[    1.573336]  its_cpu_init+0x2f0/0x494
[    1.573337]  gic_starting_cpu+0x18/0x24
[    1.573338]  cpuhp_invoke_callback+0x84/0x1e0
[    1.573339]  notify_cpu_starting+0x9c/0xb8
[    1.573341]  secondary_start_kernel+0xdc/0x168
[    1.573342] ---[ end trace f68728a0d3053b7c ]---
[    1.573348] GICv3: CPU42: using allocated LPI pending table 
@0x000000007aca0000
[    1.573370] Xen: initializing cpu42
[    1.573380] CPU42: Booted secondary processor 0x000000020a [0x481fd010]
[    1.602623] Detected VIPT I-cache on CPU43
[    1.602693] GICv3: CPU43: found redistributor 20b region 
21:0x00000000ae660000
[    1.609383] ------------[ cut here ]------------
[    1.609387] WARNING: CPU: 43 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.609387] Modules linked in:
[    1.609389] CPU: 43 PID: 0 Comm: swapper/43 Tainted: G W         
5.5.0-rc5 #132
[    1.609390] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.609392] pc : its_cpu_init+0x2f0/0x494
[    1.609393] lr : its_cpu_init+0x2ec/0x494
[    1.609394] sp : ffff800012213ee0
[    1.609394] x29: ffff800012213ee0 x28: 0000000000000000
[    1.609396] x27: 0000000000000000 x26: 0000000000000000
[    1.609397] x25: 0000000000000000 x24: ffff800012860000
[    1.609398] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.609399] x21: ffff8000117a9000 x20: fffffe0001cb2c00
[    1.609400] x19: ffff8000117db000 x18: 0000000000000000
[    1.609401] x17: 0000000000000000 x16: 0000000000000000
[    1.609402] x15: 0000000000000000 x14: 0000000000000000
[    1.609402] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.609403] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.609404] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.609405] x7 : 0000000000000000 x6 : 0000000000000070
[    1.609406] x5 : 00000000a0a0a0a0 x4 : ffff80006ca53000
[    1.609407] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.609408] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.609409] Call trace:
[    1.609411]  its_cpu_init+0x2f0/0x494
[    1.609412]  gic_starting_cpu+0x18/0x24
[    1.609413]  cpuhp_invoke_callback+0x84/0x1e0
[    1.609414]  notify_cpu_starting+0x9c/0xb8
[    1.609416]  secondary_start_kernel+0xdc/0x168
[    1.609416] ---[ end trace f68728a0d3053b7d ]---
[    1.609422] GICv3: CPU43: using allocated LPI pending table 
@0x000000007acb0000
[    1.609444] Xen: initializing cpu43
[    1.609453] CPU43: Booted secondary processor 0x000000020b [0x481fd010]
[    1.638702] Detected VIPT I-cache on CPU44
[    1.638781] GICv3: CPU44: found redistributor 20c region 
22:0x00000000ae680000
[    1.645475] ------------[ cut here ]------------
[    1.645479] WARNING: CPU: 44 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.645480] Modules linked in:
[    1.645483] CPU: 44 PID: 0 Comm: swapper/44 Tainted: G W         
5.5.0-rc5 #132
[    1.645484] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.645485] pc : its_cpu_init+0x2f0/0x494
[    1.645487] lr : its_cpu_init+0x2ec/0x494
[    1.645488] sp : ffff80001221bee0
[    1.645488] x29: ffff80001221bee0 x28: 0000000000000000
[    1.645490] x27: 0000000000000000 x26: 0000000000000000
[    1.645491] x25: 0000000000000000 x24: ffff8000128c0000
[    1.645492] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.645493] x21: ffff8000117a9000 x20: fffffe0001cb3000
[    1.645494] x19: ffff8000117db000 x18: 0000000000000000
[    1.645495] x17: 0000000000000000 x16: 0000000000000000
[    1.645496] x15: 0000000000000000 x14: 0000000000000000
[    1.645497] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.645498] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.645499] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.645500] x7 : 0000000000000000 x6 : 0000000000000070
[    1.645502] x5 : 00000000a0a0a0a0 x4 : ffff80006ca69000
[    1.645503] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.645504] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.645505] Call trace:
[    1.645507]  its_cpu_init+0x2f0/0x494
[    1.645508]  gic_starting_cpu+0x18/0x24
[    1.645510]  cpuhp_invoke_callback+0x84/0x1e0
[    1.645511]  notify_cpu_starting+0x9c/0xb8
[    1.645512]  secondary_start_kernel+0xdc/0x168
[    1.645514] ---[ end trace f68728a0d3053b7e ]---
[    1.645520] GICv3: CPU44: using allocated LPI pending table 
@0x000000007acc0000
[    1.645546] Xen: initializing cpu44
[    1.645560] CPU44: Booted secondary processor 0x000000020c [0x481fd010]
[    1.674772] Detected VIPT I-cache on CPU45
[    1.674847] GICv3: CPU45: found redistributor 20d region 
22:0x00000000ae6a0000
[    1.681538] ------------[ cut here ]------------
[    1.681541] WARNING: CPU: 45 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.681542] Modules linked in:
[    1.681544] CPU: 45 PID: 0 Comm: swapper/45 Tainted: G W         
5.5.0-rc5 #132
[    1.681545] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.681547] pc : its_cpu_init+0x2f0/0x494
[    1.681548] lr : its_cpu_init+0x2ec/0x494
[    1.681549] sp : ffff800012223ee0
[    1.681549] x29: ffff800012223ee0 x28: 0000000000000000
[    1.681551] x27: 0000000000000000 x26: 0000000000000000
[    1.681552] x25: 0000000000000000 x24: ffff8000128e0000
[    1.681553] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.681554] x21: ffff8000117a9000 x20: fffffe0001cb3400
[    1.681555] x19: ffff8000117db000 x18: 0000000000000000
[    1.681556] x17: 0000000000000000 x16: 0000000000000000
[    1.681557] x15: 0000000000000000 x14: 0000000000000000
[    1.681558] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.681559] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.681560] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.681561] x7 : 0000000000000000 x6 : 0000000000000070
[    1.681562] x5 : 00000000a0a0a0a0 x4 : ffff80006ca7f000
[    1.681563] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.681564] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.681565] Call trace:
[    1.681566]  its_cpu_init+0x2f0/0x494
[    1.681568]  gic_starting_cpu+0x18/0x24
[    1.681569]  cpuhp_invoke_callback+0x84/0x1e0
[    1.681570]  notify_cpu_starting+0x9c/0xb8
[    1.681571]  secondary_start_kernel+0xdc/0x168
[    1.681572] ---[ end trace f68728a0d3053b7f ]---
[    1.681577] GICv3: CPU45: using allocated LPI pending table 
@0x000000007acd0000
[    1.681599] Xen: initializing cpu45
[    1.681610] CPU45: Booted secondary processor 0x000000020d [0x481fd010]
[    1.710846] Detected VIPT I-cache on CPU46
[    1.710924] GICv3: CPU46: found redistributor 20e region 
23:0x00000000ae6c0000
[    1.717614] ------------[ cut here ]------------
[    1.717617] WARNING: CPU: 46 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.717618] Modules linked in:
[    1.717620] CPU: 46 PID: 0 Comm: swapper/46 Tainted: G W         
5.5.0-rc5 #132
[    1.717621] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.717623] pc : its_cpu_init+0x2f0/0x494
[    1.717625] lr : its_cpu_init+0x2ec/0x494
[    1.717625] sp : ffff80001222bee0
[    1.717626] x29: ffff80001222bee0 x28: 0000000000000000
[    1.717627] x27: 0000000000000000 x26: 0000000000000000
[    1.717628] x25: 0000000000000000 x24: ffff800012940000
[    1.717629] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.717630] x21: ffff8000117a9000 x20: fffffe0001cb3800
[    1.717631] x19: ffff8000117db000 x18: 0000000000000000
[    1.717632] x17: 0000000000000000 x16: 0000000000000000
[    1.717633] x15: 0000000000000000 x14: 0000000000000000
[    1.717634] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.717635] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.717637] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.717638] x7 : 0000000000000000 x6 : 0000000000000070
[    1.717639] x5 : 00000000a0a0a0a0 x4 : ffff80006ca95000
[    1.717640] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.717641] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.717642] Call trace:
[    1.717643]  its_cpu_init+0x2f0/0x494
[    1.717645]  gic_starting_cpu+0x18/0x24
[    1.717646]  cpuhp_invoke_callback+0x84/0x1e0
[    1.717647]  notify_cpu_starting+0x9c/0xb8
[    1.717649]  secondary_start_kernel+0xdc/0x168
[    1.717649] ---[ end trace f68728a0d3053b80 ]---
[    1.717655] GICv3: CPU46: using allocated LPI pending table 
@0x000000007ace0000
[    1.717676] Xen: initializing cpu46
[    1.717686] CPU46: Booted secondary processor 0x000000020e [0x481fd010]
[    1.746920] Detected VIPT I-cache on CPU47
[    1.746997] GICv3: CPU47: found redistributor 20f region 
23:0x00000000ae6e0000
[    1.753687] ------------[ cut here ]------------
[    1.753690] WARNING: CPU: 47 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.753691] Modules linked in:
[    1.753693] CPU: 47 PID: 0 Comm: swapper/47 Tainted: G W         
5.5.0-rc5 #132
[    1.753694] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.753696] pc : its_cpu_init+0x2f0/0x494
[    1.753697] lr : its_cpu_init+0x2ec/0x494
[    1.753697] sp : ffff800012233ee0
[    1.753698] x29: ffff800012233ee0 x28: 0000000000000000
[    1.753699] x27: 0000000000000000 x26: 0000000000000000
[    1.753700] x25: 0000000000000000 x24: ffff800012960000
[    1.753701] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.753702] x21: ffff8000117a9000 x20: fffffe0001cb3c00
[    1.753703] x19: ffff8000117db000 x18: 0000000000000000
[    1.753704] x17: 0000000000000000 x16: 0000000000000000
[    1.753705] x15: 0000000000000000 x14: 0000000000000000
[    1.753706] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.753707] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.753708] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.753709] x7 : 0000000000000000 x6 : 0000000000000070
[    1.753710] x5 : 00000000a0a0a0a0 x4 : ffff80006caab000
[    1.753711] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.753712] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.753713] Call trace:
[    1.753714]  its_cpu_init+0x2f0/0x494
[    1.753715]  gic_starting_cpu+0x18/0x24
[    1.753717]  cpuhp_invoke_callback+0x84/0x1e0
[    1.753718]  notify_cpu_starting+0x9c/0xb8
[    1.753719]  secondary_start_kernel+0xdc/0x168
[    1.753720] ---[ end trace f68728a0d3053b81 ]---
[    1.753725] GICv3: CPU47: using allocated LPI pending table 
@0x000000007acf0000
[    1.753747] Xen: initializing cpu47
[    1.753756] CPU47: Booted secondary processor 0x000000020f [0x481fd010]
[    1.783003] Detected VIPT I-cache on CPU48
[    1.783088] GICv3: CPU48: found redistributor 300 region 
24:0x00000000ae700000
[    1.789782] ------------[ cut here ]------------
[    1.789786] WARNING: CPU: 48 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.789786] Modules linked in:
[    1.789789] CPU: 48 PID: 0 Comm: swapper/48 Tainted: G W         
5.5.0-rc5 #132
[    1.789790] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.789792] pc : its_cpu_init+0x2f0/0x494
[    1.789793] lr : its_cpu_init+0x2ec/0x494
[    1.789794] sp : ffff80001228bee0
[    1.789795] x29: ffff80001228bee0 x28: 0000000000000000
[    1.789796] x27: 0000000000000000 x26: 0000000000000000
[    1.789797] x25: 0000000000000000 x24: ffff8000129c0000
[    1.789798] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.789799] x21: ffff8000117a9000 x20: fffffe0001cb4000
[    1.789800] x19: ffff8000117db000 x18: 0000000000000000
[    1.789801] x17: 0000000000000000 x16: 0000000000000000
[    1.789802] x15: 0000000000000000 x14: 0000000000000000
[    1.789803] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.789804] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.789805] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.789806] x7 : 0000000000000000 x6 : 0000000000000070
[    1.789807] x5 : 00000000a0a0a0a0 x4 : ffff80006cac1000
[    1.789808] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.789809] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.789810] Call trace:
[    1.789812]  its_cpu_init+0x2f0/0x494
[    1.789813]  gic_starting_cpu+0x18/0x24
[    1.789815]  cpuhp_invoke_callback+0x84/0x1e0
[    1.789816]  notify_cpu_starting+0x9c/0xb8
[    1.789817]  secondary_start_kernel+0xdc/0x168
[    1.789818] ---[ end trace f68728a0d3053b82 ]---
[    1.789824] GICv3: CPU48: using allocated LPI pending table 
@0x000000007ad00000
[    1.789850] Xen: initializing cpu48
[    1.789862] CPU48: Booted secondary processor 0x0000000300 [0x481fd010]
[    1.819079] Detected VIPT I-cache on CPU49
[    1.819159] GICv3: CPU49: found redistributor 301 region 
24:0x00000000ae720000
[    1.825850] ------------[ cut here ]------------
[    1.825853] WARNING: CPU: 49 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.825854] Modules linked in:
[    1.825856] CPU: 49 PID: 0 Comm: swapper/49 Tainted: G W         
5.5.0-rc5 #132
[    1.825857] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.825859] pc : its_cpu_init+0x2f0/0x494
[    1.825860] lr : its_cpu_init+0x2ec/0x494
[    1.825861] sp : ffff800012293ee0
[    1.825861] x29: ffff800012293ee0 x28: 0000000000000000
[    1.825863] x27: 0000000000000000 x26: 0000000000000000
[    1.825864] x25: 0000000000000000 x24: ffff8000129e0000
[    1.825865] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.825866] x21: ffff8000117a9000 x20: fffffe0001cb4400
[    1.825867] x19: ffff8000117db000 x18: 0000000000000000
[    1.825867] x17: 0000000000000000 x16: 0000000000000000
[    1.825868] x15: 0000000000000000 x14: 0000000000000000
[    1.825869] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.825870] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.825871] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.825872] x7 : 0000000000000000 x6 : 0000000000000070
[    1.825873] x5 : 00000000a0a0a0a0 x4 : ffff80006cad7000
[    1.825874] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.825875] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.825876] Call trace:
[    1.825878]  its_cpu_init+0x2f0/0x494
[    1.825879]  gic_starting_cpu+0x18/0x24
[    1.825880]  cpuhp_invoke_callback+0x84/0x1e0
[    1.825881]  notify_cpu_starting+0x9c/0xb8
[    1.825883]  secondary_start_kernel+0xdc/0x168
[    1.825884] ---[ end trace f68728a0d3053b83 ]---
[    1.825889] GICv3: CPU49: using allocated LPI pending table 
@0x000000007ad10000
[    1.825912] Xen: initializing cpu49
[    1.825923] CPU49: Booted secondary processor 0x0000000301 [0x481fd010]
[    1.855165] Detected VIPT I-cache on CPU50
[    1.855246] GICv3: CPU50: found redistributor 302 region 
25:0x00000000ae740000
[    1.861937] ------------[ cut here ]------------
[    1.861940] WARNING: CPU: 50 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.861941] Modules linked in:
[    1.861944] CPU: 50 PID: 0 Comm: swapper/50 Tainted: G W         
5.5.0-rc5 #132
[    1.861945] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.861946] pc : its_cpu_init+0x2f0/0x494
[    1.861948] lr : its_cpu_init+0x2ec/0x494
[    1.861948] sp : ffff80001229bee0
[    1.861949] x29: ffff80001229bee0 x28: 0000000000000000
[    1.861950] x27: 0000000000000000 x26: 0000000000000000
[    1.861951] x25: 0000000000000000 x24: ffff800012a40000
[    1.861952] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.861953] x21: ffff8000117a9000 x20: fffffe0001cb4800
[    1.861954] x19: ffff8000117db000 x18: 0000000000000000
[    1.861955] x17: 0000000000000000 x16: 0000000000000000
[    1.861956] x15: 0000000000000000 x14: 0000000000000000
[    1.861957] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.861958] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.861959] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.861960] x7 : 0000000000000000 x6 : 0000000000000070
[    1.861961] x5 : 00000000a0a0a0a0 x4 : ffff80006caed000
[    1.861962] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.861963] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.861964] Call trace:
[    1.861966]  its_cpu_init+0x2f0/0x494
[    1.861967]  gic_starting_cpu+0x18/0x24
[    1.861968]  cpuhp_invoke_callback+0x84/0x1e0
[    1.861970]  notify_cpu_starting+0x9c/0xb8
[    1.861971]  secondary_start_kernel+0xdc/0x168
[    1.861972] ---[ end trace f68728a0d3053b84 ]---
[    1.861977] GICv3: CPU50: using allocated LPI pending table 
@0x000000007ad20000
[    1.861998] Xen: initializing cpu50
[    1.862007] CPU50: Booted secondary processor 0x0000000302 [0x481fd010]
[    1.891228] Detected VIPT I-cache on CPU51
[    1.891310] GICv3: CPU51: found redistributor 303 region 
25:0x00000000ae760000
[    1.898001] ------------[ cut here ]------------
[    1.898004] WARNING: CPU: 51 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.898005] Modules linked in:
[    1.898007] CPU: 51 PID: 0 Comm: swapper/51 Tainted: G W         
5.5.0-rc5 #132
[    1.898008] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.898010] pc : its_cpu_init+0x2f0/0x494
[    1.898011] lr : its_cpu_init+0x2ec/0x494
[    1.898012] sp : ffff8000122a3ee0
[    1.898013] x29: ffff8000122a3ee0 x28: 0000000000000000
[    1.898014] x27: 0000000000000000 x26: 0000000000000000
[    1.898015] x25: 0000000000000000 x24: ffff800012a60000
[    1.898016] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.898017] x21: ffff8000117a9000 x20: fffffe0001cb4c00
[    1.898018] x19: ffff8000117db000 x18: 0000000000000000
[    1.898019] x17: 0000000000000000 x16: 0000000000000000
[    1.898020] x15: 0000000000000000 x14: 0000000000000000
[    1.898021] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.898022] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.898023] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.898023] x7 : 0000000000000000 x6 : 0000000000000070
[    1.898024] x5 : 00000000a0a0a0a0 x4 : ffff80006cb03000
[    1.898025] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.898026] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.898027] Call trace:
[    1.898029]  its_cpu_init+0x2f0/0x494
[    1.898030]  gic_starting_cpu+0x18/0x24
[    1.898031]  cpuhp_invoke_callback+0x84/0x1e0
[    1.898033]  notify_cpu_starting+0x9c/0xb8
[    1.898034]  secondary_start_kernel+0xdc/0x168
[    1.898035] ---[ end trace f68728a0d3053b85 ]---
[    1.898040] GICv3: CPU51: using allocated LPI pending table 
@0x000000007ad30000
[    1.898062] Xen: initializing cpu51
[    1.898072] CPU51: Booted secondary processor 0x0000000303 [0x481fd010]
[    1.927310] Detected VIPT I-cache on CPU52
[    1.927400] GICv3: CPU52: found redistributor 304 region 
26:0x00000000ae780000
[    1.934094] ------------[ cut here ]------------
[    1.934098] WARNING: CPU: 52 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.934099] Modules linked in:
[    1.934101] CPU: 52 PID: 0 Comm: swapper/52 Tainted: G W         
5.5.0-rc5 #132
[    1.934103] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.934105] pc : its_cpu_init+0x2f0/0x494
[    1.934106] lr : its_cpu_init+0x2ec/0x494
[    1.934107] sp : ffff8000122abee0
[    1.934107] x29: ffff8000122abee0 x28: 0000000000000000
[    1.934109] x27: 0000000000000000 x26: 0000000000000000
[    1.934110] x25: 0000000000000000 x24: ffff800012ac0000
[    1.934111] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.934112] x21: ffff8000117a9000 x20: fffffe0001cb5000
[    1.934113] x19: ffff8000117db000 x18: 0000000000000000
[    1.934114] x17: 0000000000000000 x16: 0000000000000000
[    1.934115] x15: 0000000000000000 x14: 0000000000000000
[    1.934116] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.934117] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.934118] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.934119] x7 : 0000000000000000 x6 : 0000000000000070
[    1.934120] x5 : 00000000a0a0a0a0 x4 : ffff80006cb19000
[    1.934121] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.934122] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.934123] Call trace:
[    1.934125]  its_cpu_init+0x2f0/0x494
[    1.934126]  gic_starting_cpu+0x18/0x24
[    1.934128]  cpuhp_invoke_callback+0x84/0x1e0
[    1.934129]  notify_cpu_starting+0x9c/0xb8
[    1.934131]  secondary_start_kernel+0xdc/0x168
[    1.934131] ---[ end trace f68728a0d3053b86 ]---
[    1.934137] GICv3: CPU52: using allocated LPI pending table 
@0x000000007ad40000
[    1.934164] Xen: initializing cpu52
[    1.934177] CPU52: Booted secondary processor 0x0000000304 [0x481fd010]
[    1.963380] Detected VIPT I-cache on CPU53
[    1.963465] GICv3: CPU53: found redistributor 305 region 
26:0x00000000ae7a0000
[    1.970156] ------------[ cut here ]------------
[    1.970160] WARNING: CPU: 53 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    1.970161] Modules linked in:
[    1.970163] CPU: 53 PID: 0 Comm: swapper/53 Tainted: G W         
5.5.0-rc5 #132
[    1.970164] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    1.970166] pc : its_cpu_init+0x2f0/0x494
[    1.970167] lr : its_cpu_init+0x2ec/0x494
[    1.970167] sp : ffff8000122b3ee0
[    1.970168] x29: ffff8000122b3ee0 x28: 0000000000000000
[    1.970169] x27: 0000000000000000 x26: 0000000000000000
[    1.970170] x25: 0000000000000000 x24: ffff800012ae0000
[    1.970171] x23: ffff8000111f4000 x22: ffff8000119cd000
[    1.970172] x21: ffff8000117a9000 x20: fffffe0001cb5400
[    1.970173] x19: ffff8000117db000 x18: 0000000000000000
[    1.970174] x17: 0000000000000000 x16: 0000000000000000
[    1.970175] x15: 0000000000000000 x14: 0000000000000000
[    1.970176] x13: 0000000000000000 x12: f4e33ba569c0a400
[    1.970177] x11: ffffffffffffffff x10: ffff8000119916a0
[    1.970178] x9 : 0000000000000000 x8 : ffff8000119916a0
[    1.970179] x7 : 0000000000000000 x6 : 0000000000000070
[    1.970180] x5 : 00000000a0a0a0a0 x4 : ffff80006cb2f000
[    1.970181] x3 : 000000000000003d x2 : ffffffffffffffff
[    1.970182] x1 : 0000000000010000 x0 : 00000000ffffffed
[    1.970183] Call trace:
[    1.970184]  its_cpu_init+0x2f0/0x494
[    1.970186]  gic_starting_cpu+0x18/0x24
[    1.970187]  cpuhp_invoke_callback+0x84/0x1e0
[    1.970188]  notify_cpu_starting+0x9c/0xb8
[    1.970189]  secondary_start_kernel+0xdc/0x168
[    1.970190] ---[ end trace f68728a0d3053b87 ]---
[    1.970196] GICv3: CPU53: using allocated LPI pending table 
@0x000000007ad50000
[    1.970218] Xen: initializing cpu53
[    1.970228] CPU53: Booted secondary processor 0x0000000305 [0x481fd010]
[    1.999460] Detected VIPT I-cache on CPU54
[    1.999548] GICv3: CPU54: found redistributor 306 region 
27:0x00000000ae7c0000
[    2.006239] ------------[ cut here ]------------
[    2.006242] WARNING: CPU: 54 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.006243] Modules linked in:
[    2.006245] CPU: 54 PID: 0 Comm: swapper/54 Tainted: G W         
5.5.0-rc5 #132
[    2.006246] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.006248] pc : its_cpu_init+0x2f0/0x494
[    2.006249] lr : its_cpu_init+0x2ec/0x494
[    2.006250] sp : ffff8000122bbee0
[    2.006250] x29: ffff8000122bbee0 x28: 0000000000000000
[    2.006252] x27: 0000000000000000 x26: 0000000000000000
[    2.006253] x25: 0000000000000000 x24: ffff800012b40000
[    2.006254] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.006255] x21: ffff8000117a9000 x20: fffffe0001cb5800
[    2.006256] x19: ffff8000117db000 x18: 0000000000000000
[    2.006257] x17: 0000000000000000 x16: 0000000000000000
[    2.006258] x15: 0000000000000000 x14: 0000000000000000
[    2.006259] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.006260] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.006261] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.006262] x7 : 0000000000000000 x6 : 0000000000000070
[    2.006262] x5 : 00000000a0a0a0a0 x4 : ffff80006cb45000
[    2.006263] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.006265] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.006266] Call trace:
[    2.006267]  its_cpu_init+0x2f0/0x494
[    2.006269]  gic_starting_cpu+0x18/0x24
[    2.006270]  cpuhp_invoke_callback+0x84/0x1e0
[    2.006271]  notify_cpu_starting+0x9c/0xb8
[    2.006273]  secondary_start_kernel+0xdc/0x168
[    2.006273] ---[ end trace f68728a0d3053b88 ]---
[    2.006279] GICv3: CPU54: using allocated LPI pending table 
@0x000000007ad60000
[    2.006300] Xen: initializing cpu54
[    2.006310] CPU54: Booted secondary processor 0x0000000306 [0x481fd010]
[    2.035533] Detected VIPT I-cache on CPU55
[    2.035621] GICv3: CPU55: found redistributor 307 region 
27:0x00000000ae7e0000
[    2.042311] ------------[ cut here ]------------
[    2.042314] WARNING: CPU: 55 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.042315] Modules linked in:
[    2.042317] CPU: 55 PID: 0 Comm: swapper/55 Tainted: G W         
5.5.0-rc5 #132
[    2.042318] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.042320] pc : its_cpu_init+0x2f0/0x494
[    2.042321] lr : its_cpu_init+0x2ec/0x494
[    2.042322] sp : ffff80001230bee0
[    2.042323] x29: ffff80001230bee0 x28: 0000000000000000
[    2.042324] x27: 0000000000000000 x26: 0000000000000000
[    2.042325] x25: 0000000000000000 x24: ffff800012b60000
[    2.042326] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.042327] x21: ffff8000117a9000 x20: fffffe0001cb5c00
[    2.042328] x19: ffff8000117db000 x18: 0000000000000000
[    2.042329] x17: 0000000000000000 x16: 0000000000000000
[    2.042330] x15: 0000000000000000 x14: 0000000000000000
[    2.042331] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.042331] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.042332] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.042333] x7 : 0000000000000000 x6 : 0000000000000070
[    2.042334] x5 : 00000000a0a0a0a0 x4 : ffff80006cb5b000
[    2.042335] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.042336] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.042337] Call trace:
[    2.042339]  its_cpu_init+0x2f0/0x494
[    2.042340]  gic_starting_cpu+0x18/0x24
[    2.042341]  cpuhp_invoke_callback+0x84/0x1e0
[    2.042342]  notify_cpu_starting+0x9c/0xb8
[    2.042344]  secondary_start_kernel+0xdc/0x168
[    2.042344] ---[ end trace f68728a0d3053b89 ]---
[    2.042350] GICv3: CPU55: using allocated LPI pending table 
@0x000000007ad70000
[    2.042371] Xen: initializing cpu55
[    2.042381] CPU55: Booted secondary processor 0x0000000307 [0x481fd010]
[    2.071619] Detected VIPT I-cache on CPU56
[    2.071714] GICv3: CPU56: found redistributor 308 region 
28:0x00000000ae800000
[    2.078408] ------------[ cut here ]------------
[    2.078413] WARNING: CPU: 56 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.078413] Modules linked in:
[    2.078416] CPU: 56 PID: 0 Comm: swapper/56 Tainted: G W         
5.5.0-rc5 #132
[    2.078417] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.078419] pc : its_cpu_init+0x2f0/0x494
[    2.078420] lr : its_cpu_init+0x2ec/0x494
[    2.078421] sp : ffff800012313ee0
[    2.078422] x29: ffff800012313ee0 x28: 0000000000000000
[    2.078423] x27: 0000000000000000 x26: 0000000000000000
[    2.078424] x25: 0000000000000000 x24: ffff800012bc0000
[    2.078425] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.078426] x21: ffff8000117a9000 x20: fffffe0001cb6000
[    2.078427] x19: ffff8000117db000 x18: 0000000000000000
[    2.078428] x17: 0000000000000000 x16: 0000000000000000
[    2.078429] x15: 0000000000000000 x14: 0000000000000000
[    2.078430] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.078431] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.078431] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.078432] x7 : 0000000000000000 x6 : 0000000000000070
[    2.078433] x5 : 00000000a0a0a0a0 x4 : ffff80006cb71000
[    2.078434] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.078435] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.078436] Call trace:
[    2.078438]  its_cpu_init+0x2f0/0x494
[    2.078439]  gic_starting_cpu+0x18/0x24
[    2.078441]  cpuhp_invoke_callback+0x84/0x1e0
[    2.078442]  notify_cpu_starting+0x9c/0xb8
[    2.078443]  secondary_start_kernel+0xdc/0x168
[    2.078444] ---[ end trace f68728a0d3053b8a ]---
[    2.078450] GICv3: CPU56: using allocated LPI pending table 
@0x000000007ad80000
[    2.078476] Xen: initializing cpu56
[    2.078490] CPU56: Booted secondary processor 0x0000000308 [0x481fd010]
[    2.107689] Detected VIPT I-cache on CPU57
[    2.107782] GICv3: CPU57: found redistributor 309 region 
28:0x00000000ae820000
[    2.114473] ------------[ cut here ]------------
[    2.114476] WARNING: CPU: 57 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.114477] Modules linked in:
[    2.114479] CPU: 57 PID: 0 Comm: swapper/57 Tainted: G W         
5.5.0-rc5 #132
[    2.114481] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.114482] pc : its_cpu_init+0x2f0/0x494
[    2.114484] lr : its_cpu_init+0x2ec/0x494
[    2.114484] sp : ffff80001231bee0
[    2.114485] x29: ffff80001231bee0 x28: 0000000000000000
[    2.114486] x27: 0000000000000000 x26: 0000000000000000
[    2.114487] x25: 0000000000000000 x24: ffff800012be0000
[    2.114488] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.114489] x21: ffff8000117a9000 x20: fffffe0001cb6400
[    2.114491] x19: ffff8000117db000 x18: 0000000000000000
[    2.114492] x17: 0000000000000000 x16: 0000000000000000
[    2.114493] x15: 0000000000000000 x14: 0000000000000000
[    2.114494] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.114495] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.114496] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.114497] x7 : 0000000000000000 x6 : 0000000000000070
[    2.114498] x5 : 00000000a0a0a0a0 x4 : ffff80006cb87000
[    2.114499] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.114500] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.114501] Call trace:
[    2.114503]  its_cpu_init+0x2f0/0x494
[    2.114504]  gic_starting_cpu+0x18/0x24
[    2.114505]  cpuhp_invoke_callback+0x84/0x1e0
[    2.114507]  notify_cpu_starting+0x9c/0xb8
[    2.114508]  secondary_start_kernel+0xdc/0x168
[    2.114509] ---[ end trace f68728a0d3053b8b ]---
[    2.114514] GICv3: CPU57: using allocated LPI pending table 
@0x000000007ad90000
[    2.114536] Xen: initializing cpu57
[    2.114546] CPU57: Booted secondary processor 0x0000000309 [0x481fd010]
[    2.143769] Detected VIPT I-cache on CPU58
[    2.143862] GICv3: CPU58: found redistributor 30a region 
29:0x00000000ae840000
[    2.150553] ------------[ cut here ]------------
[    2.150556] WARNING: CPU: 58 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.150557] Modules linked in:
[    2.150559] CPU: 58 PID: 0 Comm: swapper/58 Tainted: G W         
5.5.0-rc5 #132
[    2.150560] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.150562] pc : its_cpu_init+0x2f0/0x494
[    2.150563] lr : its_cpu_init+0x2ec/0x494
[    2.150564] sp : ffff800012323ee0
[    2.150564] x29: ffff800012323ee0 x28: 0000000000000000
[    2.150565] x27: 0000000000000000 x26: 0000000000000000
[    2.150566] x25: 0000000000000000 x24: ffff800012c40000
[    2.150567] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.150568] x21: ffff8000117a9000 x20: fffffe0001cb6800
[    2.150570] x19: ffff8000117db000 x18: 0000000000000000
[    2.150571] x17: 0000000000000000 x16: 0000000000000000
[    2.150572] x15: 0000000000000000 x14: 0000000000000000
[    2.150573] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.150574] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.150575] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.150576] x7 : 0000000000000000 x6 : 0000000000000070
[    2.150577] x5 : 00000000a0a0a0a0 x4 : ffff80006cb9d000
[    2.150578] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.150579] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.150580] Call trace:
[    2.150582]  its_cpu_init+0x2f0/0x494
[    2.150583]  gic_starting_cpu+0x18/0x24
[    2.150584]  cpuhp_invoke_callback+0x84/0x1e0
[    2.150585]  notify_cpu_starting+0x9c/0xb8
[    2.150587]  secondary_start_kernel+0xdc/0x168
[    2.150587] ---[ end trace f68728a0d3053b8c ]---
[    2.150593] GICv3: CPU58: using allocated LPI pending table 
@0x000000007ada0000
[    2.150614] Xen: initializing cpu58
[    2.150624] CPU58: Booted secondary processor 0x000000030a [0x481fd010]
[    2.179842] Detected VIPT I-cache on CPU59
[    2.179936] GICv3: CPU59: found redistributor 30b region 
29:0x00000000ae860000
[    2.186627] ------------[ cut here ]------------
[    2.186631] WARNING: CPU: 59 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.186631] Modules linked in:
[    2.186633] CPU: 59 PID: 0 Comm: swapper/59 Tainted: G W         
5.5.0-rc5 #132
[    2.186635] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.186636] pc : its_cpu_init+0x2f0/0x494
[    2.186637] lr : its_cpu_init+0x2ec/0x494
[    2.186638] sp : ffff80001232bee0
[    2.186639] x29: ffff80001232bee0 x28: 0000000000000000
[    2.186640] x27: 0000000000000000 x26: 0000000000000000
[    2.186641] x25: 0000000000000000 x24: ffff800012c60000
[    2.186642] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.186643] x21: ffff8000117a9000 x20: fffffe0001cb6c00
[    2.186644] x19: ffff8000117db000 x18: 0000000000000000
[    2.186645] x17: 0000000000000000 x16: 0000000000000000
[    2.186646] x15: 0000000000000000 x14: 0000000000000000
[    2.186646] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.186647] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.186648] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.186650] x7 : 0000000000000000 x6 : 0000000000000070
[    2.186650] x5 : 00000000a0a0a0a0 x4 : ffff80006cbb3000
[    2.186652] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.186653] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.186654] Call trace:
[    2.186655]  its_cpu_init+0x2f0/0x494
[    2.186656]  gic_starting_cpu+0x18/0x24
[    2.186658]  cpuhp_invoke_callback+0x84/0x1e0
[    2.186659]  notify_cpu_starting+0x9c/0xb8
[    2.186661]  secondary_start_kernel+0xdc/0x168
[    2.186661] ---[ end trace f68728a0d3053b8d ]---
[    2.186667] GICv3: CPU59: using allocated LPI pending table 
@0x000000007adb0000
[    2.186689] Xen: initializing cpu59
[    2.186699] CPU59: Booted secondary processor 0x000000030b [0x481fd010]
[    2.215926] Detected VIPT I-cache on CPU60
[    2.216027] GICv3: CPU60: found redistributor 30c region 
30:0x00000000ae880000
[    2.222721] ------------[ cut here ]------------
[    2.222725] WARNING: CPU: 60 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.222726] Modules linked in:
[    2.222729] CPU: 60 PID: 0 Comm: swapper/60 Tainted: G W         
5.5.0-rc5 #132
[    2.222730] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.222732] pc : its_cpu_init+0x2f0/0x494
[    2.222733] lr : its_cpu_init+0x2ec/0x494
[    2.222734] sp : ffff800012333ee0
[    2.222734] x29: ffff800012333ee0 x28: 0000000000000000
[    2.222736] x27: 0000000000000000 x26: 0000000000000000
[    2.222737] x25: 0000000000000000 x24: ffff800012cc0000
[    2.222738] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.222739] x21: ffff8000117a9000 x20: fffffe0001cb7000
[    2.222740] x19: ffff8000117db000 x18: 0000000000000000
[    2.222741] x17: 0000000000000000 x16: 0000000000000000
[    2.222742] x15: 0000000000000000 x14: 0000000000000000
[    2.222743] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.222744] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.222744] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.222745] x7 : 0000000000000000 x6 : 0000000000000070
[    2.222746] x5 : 00000000a0a0a0a0 x4 : ffff80006cbc9000
[    2.222747] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.222748] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.222749] Call trace:
[    2.222751]  its_cpu_init+0x2f0/0x494
[    2.222752]  gic_starting_cpu+0x18/0x24
[    2.222754]  cpuhp_invoke_callback+0x84/0x1e0
[    2.222755]  notify_cpu_starting+0x9c/0xb8
[    2.222757]  secondary_start_kernel+0xdc/0x168
[    2.222757] ---[ end trace f68728a0d3053b8e ]---
[    2.222763] GICv3: CPU60: using allocated LPI pending table 
@0x000000007adc0000
[    2.222788] Xen: initializing cpu60
[    2.222802] CPU60: Booted secondary processor 0x000000030c [0x481fd010]
[    2.251994] Detected VIPT I-cache on CPU61
[    2.252089] GICv3: CPU61: found redistributor 30d region 
30:0x00000000ae8a0000
[    2.258781] ------------[ cut here ]------------
[    2.258785] WARNING: CPU: 61 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.258785] Modules linked in:
[    2.258787] CPU: 61 PID: 0 Comm: swapper/61 Tainted: G W         
5.5.0-rc5 #132
[    2.258789] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.258790] pc : its_cpu_init+0x2f0/0x494
[    2.258792] lr : its_cpu_init+0x2ec/0x494
[    2.258793] sp : ffff80001238bee0
[    2.258793] x29: ffff80001238bee0 x28: 0000000000000000
[    2.258794] x27: 0000000000000000 x26: 0000000000000000
[    2.258795] x25: 0000000000000000 x24: ffff800012ce0000
[    2.258796] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.258797] x21: ffff8000117a9000 x20: fffffe0001cb7400
[    2.258798] x19: ffff8000117db000 x18: 0000000000000000
[    2.258799] x17: 0000000000000000 x16: 0000000000000000
[    2.258800] x15: 0000000000000000 x14: 0000000000000000
[    2.258801] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.258802] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.258803] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.258804] x7 : 0000000000000000 x6 : 0000000000000070
[    2.258805] x5 : 00000000a0a0a0a0 x4 : ffff80006cbdf000
[    2.258806] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.258807] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.258808] Call trace:
[    2.258809]  its_cpu_init+0x2f0/0x494
[    2.258810]  gic_starting_cpu+0x18/0x24
[    2.258812]  cpuhp_invoke_callback+0x84/0x1e0
[    2.258813]  notify_cpu_starting+0x9c/0xb8
[    2.258814]  secondary_start_kernel+0xdc/0x168
[    2.258815] ---[ end trace f68728a0d3053b8f ]---
[    2.258820] GICv3: CPU61: using allocated LPI pending table 
@0x000000007add0000
[    2.258842] Xen: initializing cpu61
[    2.258852] CPU61: Booted secondary processor 0x000000030d [0x481fd010]
[    2.288073] Detected VIPT I-cache on CPU62
[    2.288173] GICv3: CPU62: found redistributor 30e region 
31:0x00000000ae8c0000
[    2.294866] ------------[ cut here ]------------
[    2.294870] WARNING: CPU: 62 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.294870] Modules linked in:
[    2.294872] CPU: 62 PID: 0 Comm: swapper/62 Tainted: G W         
5.5.0-rc5 #132
[    2.294874] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.294876] pc : its_cpu_init+0x2f0/0x494
[    2.294877] lr : its_cpu_init+0x2ec/0x494
[    2.294878] sp : ffff800012393ee0
[    2.294878] x29: ffff800012393ee0 x28: 0000000000000000
[    2.294880] x27: 0000000000000000 x26: 0000000000000000
[    2.294881] x25: 0000000000000000 x24: ffff800012d40000
[    2.294882] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.294883] x21: ffff8000117a9000 x20: fffffe0001cb7800
[    2.294884] x19: ffff8000117db000 x18: 0000000000000000
[    2.294885] x17: 0000000000000000 x16: 0000000000000000
[    2.294886] x15: 0000000000000000 x14: 0000000000000000
[    2.294887] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.294888] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.294889] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.294890] x7 : 0000000000000000 x6 : 0000000000000070
[    2.294891] x5 : 00000000a0a0a0a0 x4 : ffff80006cbf5000
[    2.294892] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.294893] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.294894] Call trace:
[    2.294896]  its_cpu_init+0x2f0/0x494
[    2.294897]  gic_starting_cpu+0x18/0x24
[    2.294898]  cpuhp_invoke_callback+0x84/0x1e0
[    2.294899]  notify_cpu_starting+0x9c/0xb8
[    2.294901]  secondary_start_kernel+0xdc/0x168
[    2.294902] ---[ end trace f68728a0d3053b90 ]---
[    2.294907] GICv3: CPU62: using allocated LPI pending table 
@0x000000007ade0000
[    2.294928] Xen: initializing cpu62
[    2.294939] CPU62: Booted secondary processor 0x000000030e [0x481fd010]
[    2.324148] Detected VIPT I-cache on CPU63
[    2.324247] GICv3: CPU63: found redistributor 30f region 
31:0x00000000ae8e0000
[    2.330939] ------------[ cut here ]------------
[    2.330942] WARNING: CPU: 63 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.330943] Modules linked in:
[    2.330945] CPU: 63 PID: 0 Comm: swapper/63 Tainted: G W         
5.5.0-rc5 #132
[    2.330946] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.330947] pc : its_cpu_init+0x2f0/0x494
[    2.330949] lr : its_cpu_init+0x2ec/0x494
[    2.330949] sp : ffff80001239bee0
[    2.330950] x29: ffff80001239bee0 x28: 0000000000000000
[    2.330951] x27: 0000000000000000 x26: 0000000000000000
[    2.330952] x25: 0000000000000000 x24: ffff800012d60000
[    2.330953] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.330954] x21: ffff8000117a9000 x20: fffffe0001cb7c00
[    2.330955] x19: ffff8000117db000 x18: 0000000000000000
[    2.330956] x17: 0000000000000000 x16: 0000000000000000
[    2.330957] x15: 0000000000000000 x14: 0000000000000000
[    2.330959] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.330959] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.330961] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.330962] x7 : 0000000000000000 x6 : 0000000000000070
[    2.330963] x5 : 00000000a0a0a0a0 x4 : ffff80006cc0b000
[    2.330964] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.330965] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.330966] Call trace:
[    2.330968]  its_cpu_init+0x2f0/0x494
[    2.330969]  gic_starting_cpu+0x18/0x24
[    2.330970]  cpuhp_invoke_callback+0x84/0x1e0
[    2.330972]  notify_cpu_starting+0x9c/0xb8
[    2.330973]  secondary_start_kernel+0xdc/0x168
[    2.330974] ---[ end trace f68728a0d3053b91 ]---
[    2.330980] GICv3: CPU63: using allocated LPI pending table 
@0x000000007adf0000
[    2.331002] Xen: initializing cpu63
[    2.331013] CPU63: Booted secondary processor 0x000000030f [0x481fd010]
[    2.360254] Detected VIPT I-cache on CPU64
[    2.360383] GICv3: CPU64: found redistributor 400 region 
32:0x00000000aa100000
[    2.367097] ------------[ cut here ]------------
[    2.367107] WARNING: CPU: 64 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.367108] Modules linked in:
[    2.367115] CPU: 64 PID: 0 Comm: swapper/64 Tainted: G W         
5.5.0-rc5 #132
[    2.367116] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.367118] pc : its_cpu_init+0x2f0/0x494
[    2.367119] lr : its_cpu_init+0x2ec/0x494
[    2.367120] sp : ffff8000123a3ee0
[    2.367121] x29: ffff8000123a3ee0 x28: 0000000000000000
[    2.367122] x27: 0000000000000000 x26: 0000000000000000
[    2.367123] x25: 0000000000000000 x24: ffff800012dc0000
[    2.367124] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.367125] x21: ffff8000117a9000 x20: fffffe0001cb8000
[    2.367126] x19: ffff8000117db000 x18: 0000000000000000
[    2.367127] x17: 0000000000000000 x16: 0000000000000000
[    2.367128] x15: 0000000000000000 x14: 0000000000000000
[    2.367129] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.367129] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.367130] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.367131] x7 : 0000000000000000 x6 : 0000000000000070
[    2.367133] x5 : 00000000a0a0a0a0 x4 : ffffa0260de8c000
[    2.367134] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.367135] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.367137] Call trace:
[    2.367139]  its_cpu_init+0x2f0/0x494
[    2.367141]  gic_starting_cpu+0x18/0x24
[    2.367144]  cpuhp_invoke_callback+0x84/0x1e0
[    2.367146]  notify_cpu_starting+0x9c/0xb8
[    2.367148]  secondary_start_kernel+0xdc/0x168
[    2.367150] ---[ end trace f68728a0d3053b92 ]---
[    2.367158] GICv3: CPU64: using allocated LPI pending table 
@0x000000007ae00000
[    2.367204] Xen: initializing cpu64
[    2.367228] CPU64: Booted secondary processor 0x0000000400 [0x481fd010]
[    2.396312] Detected VIPT I-cache on CPU65
[    2.396413] GICv3: CPU65: found redistributor 401 region 
32:0x00000000aa120000
[    2.403105] ------------[ cut here ]------------
[    2.403109] WARNING: CPU: 65 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.403110] Modules linked in:
[    2.403112] CPU: 65 PID: 0 Comm: swapper/65 Tainted: G W         
5.5.0-rc5 #132
[    2.403114] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.403115] pc : its_cpu_init+0x2f0/0x494
[    2.403117] lr : its_cpu_init+0x2ec/0x494
[    2.403118] sp : ffff8000123abee0
[    2.403118] x29: ffff8000123abee0 x28: 0000000000000000
[    2.403120] x27: 0000000000000000 x26: 0000000000000000
[    2.403121] x25: 0000000000000000 x24: ffff800012de0000
[    2.403122] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.403123] x21: ffff8000117a9000 x20: fffffe0001cb8400
[    2.403123] x19: ffff8000117db000 x18: 0000000000000000
[    2.403124] x17: 0000000000000000 x16: 0000000000000000
[    2.403126] x15: 0000000000000000 x14: 0000000000000000
[    2.403126] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.403127] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.403129] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.403130] x7 : 0000000000000000 x6 : 0000000000000070
[    2.403131] x5 : 00000000a0a0a0a0 x4 : ffffa0260dea2000
[    2.403132] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.403133] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.403134] Call trace:
[    2.403136]  its_cpu_init+0x2f0/0x494
[    2.403137]  gic_starting_cpu+0x18/0x24
[    2.403138]  cpuhp_invoke_callback+0x84/0x1e0
[    2.403140]  notify_cpu_starting+0x9c/0xb8
[    2.403141]  secondary_start_kernel+0xdc/0x168
[    2.403142] ---[ end trace f68728a0d3053b93 ]---
[    2.403148] GICv3: CPU65: using allocated LPI pending table 
@0x000000007ae10000
[    2.403178] Xen: initializing cpu65
[    2.403186] CPU65: Booted secondary processor 0x0000000401 [0x481fd010]
[    2.432398] Detected VIPT I-cache on CPU66
[    2.432500] GICv3: CPU66: found redistributor 402 region 
33:0x00000000aa140000
[    2.439191] ------------[ cut here ]------------
[    2.439195] WARNING: CPU: 66 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.439195] Modules linked in:
[    2.439198] CPU: 66 PID: 0 Comm: swapper/66 Tainted: G W         
5.5.0-rc5 #132
[    2.439199] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.439201] pc : its_cpu_init+0x2f0/0x494
[    2.439202] lr : its_cpu_init+0x2ec/0x494
[    2.439203] sp : ffff8000123b3ee0
[    2.439203] x29: ffff8000123b3ee0 x28: 0000000000000000
[    2.439205] x27: 0000000000000000 x26: 0000000000000000
[    2.439206] x25: 0000000000000000 x24: ffff800012e40000
[    2.439207] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.439208] x21: ffff8000117a9000 x20: fffffe0001cb8800
[    2.439209] x19: ffff8000117db000 x18: 0000000000000000
[    2.439210] x17: 0000000000000000 x16: 0000000000000000
[    2.439211] x15: 0000000000000000 x14: 0000000000000000
[    2.439212] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.439213] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.439214] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.439215] x7 : 0000000000000000 x6 : 0000000000000070
[    2.439216] x5 : 00000000a0a0a0a0 x4 : ffffa0260deb8000
[    2.439217] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.439218] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.439219] Call trace:
[    2.439220]  its_cpu_init+0x2f0/0x494
[    2.439222]  gic_starting_cpu+0x18/0x24
[    2.439223]  cpuhp_invoke_callback+0x84/0x1e0
[    2.439224]  notify_cpu_starting+0x9c/0xb8
[    2.439226]  secondary_start_kernel+0xdc/0x168
[    2.439227] ---[ end trace f68728a0d3053b94 ]---
[    2.439233] GICv3: CPU66: using allocated LPI pending table 
@0x000000007ae20000
[    2.439261] Xen: initializing cpu66
[    2.439270] CPU66: Booted secondary processor 0x0000000402 [0x481fd010]
[    2.468507] Detected VIPT I-cache on CPU67
[    2.468608] GICv3: CPU67: found redistributor 403 region 
33:0x00000000aa160000
[    2.475299] ------------[ cut here ]------------
[    2.475303] WARNING: CPU: 67 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.475303] Modules linked in:
[    2.475306] CPU: 67 PID: 0 Comm: swapper/67 Tainted: G W         
5.5.0-rc5 #132
[    2.475307] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.475309] pc : its_cpu_init+0x2f0/0x494
[    2.475310] lr : its_cpu_init+0x2ec/0x494
[    2.475311] sp : ffff8000123bbee0
[    2.475311] x29: ffff8000123bbee0 x28: 0000000000000000
[    2.475313] x27: 0000000000000000 x26: 0000000000000000
[    2.475314] x25: 0000000000000000 x24: ffff800012e60000
[    2.475315] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.475316] x21: ffff8000117a9000 x20: fffffe0001cb8c00
[    2.475317] x19: ffff8000117db000 x18: 0000000000000000
[    2.475318] x17: 0000000000000000 x16: 0000000000000000
[    2.475319] x15: 0000000000000000 x14: 0000000000000000
[    2.475320] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.475321] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.475322] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.475323] x7 : 0000000000000000 x6 : 0000000000000070
[    2.475324] x5 : 00000000a0a0a0a0 x4 : ffffa0260dece000
[    2.475325] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.475326] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.475327] Call trace:
[    2.475329]  its_cpu_init+0x2f0/0x494
[    2.475330]  gic_starting_cpu+0x18/0x24
[    2.475332]  cpuhp_invoke_callback+0x84/0x1e0
[    2.475333]  notify_cpu_starting+0x9c/0xb8
[    2.475334]  secondary_start_kernel+0xdc/0x168
[    2.475335] ---[ end trace f68728a0d3053b95 ]---
[    2.475341] GICv3: CPU67: using allocated LPI pending table 
@0x000000007ae30000
[    2.475367] Xen: initializing cpu67
[    2.475377] CPU67: Booted secondary processor 0x0000000403 [0x481fd010]
[    2.504596] Detected VIPT I-cache on CPU68
[    2.504705] GICv3: CPU68: found redistributor 404 region 
34:0x00000000aa180000
[    2.511403] ------------[ cut here ]------------
[    2.511408] WARNING: CPU: 68 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.511408] Modules linked in:
[    2.511411] CPU: 68 PID: 0 Comm: swapper/68 Tainted: G W         
5.5.0-rc5 #132
[    2.511413] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.511414] pc : its_cpu_init+0x2f0/0x494
[    2.511416] lr : its_cpu_init+0x2ec/0x494
[    2.511416] sp : ffff80001240bee0
[    2.511417] x29: ffff80001240bee0 x28: 0000000000000000
[    2.511418] x27: 0000000000000000 x26: 0000000000000000
[    2.511419] x25: 0000000000000000 x24: ffff800012ec0000
[    2.511420] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.511421] x21: ffff8000117a9000 x20: fffffe0001cb9000
[    2.511422] x19: ffff8000117db000 x18: 0000000000000000
[    2.511423] x17: 0000000000000000 x16: 0000000000000000
[    2.511424] x15: 0000000000000000 x14: 0000000000000000
[    2.511425] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.511426] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.511427] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.511428] x7 : 0000000000000000 x6 : 0000000000000070
[    2.511429] x5 : 00000000a0a0a0a0 x4 : ffffa0260dee4000
[    2.511430] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.511431] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.511432] Call trace:
[    2.511434]  its_cpu_init+0x2f0/0x494
[    2.511435]  gic_starting_cpu+0x18/0x24
[    2.511437]  cpuhp_invoke_callback+0x84/0x1e0
[    2.511438]  notify_cpu_starting+0x9c/0xb8
[    2.511439]  secondary_start_kernel+0xdc/0x168
[    2.511440] ---[ end trace f68728a0d3053b96 ]---
[    2.511446] GICv3: CPU68: using allocated LPI pending table 
@0x000000007ae40000
[    2.511475] Xen: initializing cpu68
[    2.511489] CPU68: Booted secondary processor 0x0000000404 [0x481fd010]
[    2.540679] Detected VIPT I-cache on CPU69
[    2.540785] GICv3: CPU69: found redistributor 405 region 
34:0x00000000aa1a0000
[    2.547478] ------------[ cut here ]------------
[    2.547482] WARNING: CPU: 69 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.547482] Modules linked in:
[    2.547485] CPU: 69 PID: 0 Comm: swapper/69 Tainted: G W         
5.5.0-rc5 #132
[    2.547486] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.547488] pc : its_cpu_init+0x2f0/0x494
[    2.547489] lr : its_cpu_init+0x2ec/0x494
[    2.547490] sp : ffff800012413ee0
[    2.547490] x29: ffff800012413ee0 x28: 0000000000000000
[    2.547492] x27: 0000000000000000 x26: 0000000000000000
[    2.547493] x25: 0000000000000000 x24: ffff800012ee0000
[    2.547494] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.547495] x21: ffff8000117a9000 x20: fffffe0001cb9400
[    2.547495] x19: ffff8000117db000 x18: 0000000000000000
[    2.547496] x17: 0000000000000000 x16: 0000000000000000
[    2.547497] x15: 0000000000000000 x14: 0000000000000000
[    2.547498] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.547499] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.547500] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.547501] x7 : 0000000000000000 x6 : 0000000000000070
[    2.547502] x5 : 00000000a0a0a0a0 x4 : ffffa0260defa000
[    2.547503] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.547504] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.547506] Call trace:
[    2.547507]  its_cpu_init+0x2f0/0x494
[    2.547508]  gic_starting_cpu+0x18/0x24
[    2.547510]  cpuhp_invoke_callback+0x84/0x1e0
[    2.547511]  notify_cpu_starting+0x9c/0xb8
[    2.547512]  secondary_start_kernel+0xdc/0x168
[    2.547513] ---[ end trace f68728a0d3053b97 ]---
[    2.547519] GICv3: CPU69: using allocated LPI pending table 
@0x000000007ae50000
[    2.547541] Xen: initializing cpu69
[    2.547550] CPU69: Booted secondary processor 0x0000000405 [0x481fd010]
[    2.576766] Detected VIPT I-cache on CPU70
[    2.576871] GICv3: CPU70: found redistributor 406 region 
35:0x00000000aa1c0000
[    2.583564] ------------[ cut here ]------------
[    2.583568] WARNING: CPU: 70 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.583568] Modules linked in:
[    2.583571] CPU: 70 PID: 0 Comm: swapper/70 Tainted: G W         
5.5.0-rc5 #132
[    2.583572] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.583574] pc : its_cpu_init+0x2f0/0x494
[    2.583575] lr : its_cpu_init+0x2ec/0x494
[    2.583576] sp : ffff80001241bee0
[    2.583576] x29: ffff80001241bee0 x28: 0000000000000000
[    2.583578] x27: 0000000000000000 x26: 0000000000000000
[    2.583579] x25: 0000000000000000 x24: ffff800012f40000
[    2.583580] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.583581] x21: ffff8000117a9000 x20: fffffe0001cb9800
[    2.583582] x19: ffff8000117db000 x18: 0000000000000000
[    2.583582] x17: 0000000000000000 x16: 0000000000000000
[    2.583583] x15: 0000000000000000 x14: 0000000000000000
[    2.583584] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.583585] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.583586] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.583587] x7 : 0000000000000000 x6 : 0000000000000070
[    2.583588] x5 : 00000000a0a0a0a0 x4 : ffffa0260df10000
[    2.583589] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.583590] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.583592] Call trace:
[    2.583593]  its_cpu_init+0x2f0/0x494
[    2.583594]  gic_starting_cpu+0x18/0x24
[    2.583596]  cpuhp_invoke_callback+0x84/0x1e0
[    2.583597]  notify_cpu_starting+0x9c/0xb8
[    2.583598]  secondary_start_kernel+0xdc/0x168
[    2.583599] ---[ end trace f68728a0d3053b98 ]---
[    2.583605] GICv3: CPU70: using allocated LPI pending table 
@0x000000007ae60000
[    2.583626] Xen: initializing cpu70
[    2.583635] CPU70: Booted secondary processor 0x0000000406 [0x481fd010]
[    2.612855] Detected VIPT I-cache on CPU71
[    2.612963] GICv3: CPU71: found redistributor 407 region 
35:0x00000000aa1e0000
[    2.619657] ------------[ cut here ]------------
[    2.619660] WARNING: CPU: 71 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.619661] Modules linked in:
[    2.619663] CPU: 71 PID: 0 Comm: swapper/71 Tainted: G W         
5.5.0-rc5 #132
[    2.619664] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.619666] pc : its_cpu_init+0x2f0/0x494
[    2.619667] lr : its_cpu_init+0x2ec/0x494
[    2.619668] sp : ffff800012423ee0
[    2.619668] x29: ffff800012423ee0 x28: 0000000000000000
[    2.619670] x27: 0000000000000000 x26: 0000000000000000
[    2.619671] x25: 0000000000000000 x24: ffff800012f60000
[    2.619672] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.619673] x21: ffff8000117a9000 x20: fffffe0001cb9c00
[    2.619674] x19: ffff8000117db000 x18: 0000000000000000
[    2.619674] x17: 0000000000000000 x16: 0000000000000000
[    2.619675] x15: 0000000000000000 x14: 0000000000000000
[    2.619676] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.619677] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.619678] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.619679] x7 : 0000000000000000 x6 : 0000000000000070
[    2.619680] x5 : 00000000a0a0a0a0 x4 : ffffa0260df26000
[    2.619681] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.619682] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.619683] Call trace:
[    2.619685]  its_cpu_init+0x2f0/0x494
[    2.619686]  gic_starting_cpu+0x18/0x24
[    2.619687]  cpuhp_invoke_callback+0x84/0x1e0
[    2.619688]  notify_cpu_starting+0x9c/0xb8
[    2.619690]  secondary_start_kernel+0xdc/0x168
[    2.619691] ---[ end trace f68728a0d3053b99 ]---
[    2.619696] GICv3: CPU71: using allocated LPI pending table 
@0x000000007ae70000
[    2.619718] Xen: initializing cpu71
[    2.619726] CPU71: Booted secondary processor 0x0000000407 [0x481fd010]
[    2.648947] Detected VIPT I-cache on CPU72
[    2.649062] GICv3: CPU72: found redistributor 408 region 
36:0x00000000aa200000
[    2.655761] ------------[ cut here ]------------
[    2.655765] WARNING: CPU: 72 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.655765] Modules linked in:
[    2.655768] CPU: 72 PID: 0 Comm: swapper/72 Tainted: G W         
5.5.0-rc5 #132
[    2.655770] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.655771] pc : its_cpu_init+0x2f0/0x494
[    2.655773] lr : its_cpu_init+0x2ec/0x494
[    2.655774] sp : ffff80001242bee0
[    2.655774] x29: ffff80001242bee0 x28: 0000000000000000
[    2.655775] x27: 0000000000000000 x26: 0000000000000000
[    2.655776] x25: 0000000000000000 x24: ffff800012fc0000
[    2.655777] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.655778] x21: ffff8000117a9000 x20: fffffe0001cba000
[    2.655779] x19: ffff8000117db000 x18: 0000000000000000
[    2.655780] x17: 0000000000000000 x16: 0000000000000000
[    2.655781] x15: 0000000000000000 x14: 0000000000000000
[    2.655782] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.655783] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.655784] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.655785] x7 : 0000000000000000 x6 : 0000000000000070
[    2.655786] x5 : 00000000a0a0a0a0 x4 : ffffa0260df3c000
[    2.655787] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.655788] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.655789] Call trace:
[    2.655791]  its_cpu_init+0x2f0/0x494
[    2.655792]  gic_starting_cpu+0x18/0x24
[    2.655794]  cpuhp_invoke_callback+0x84/0x1e0
[    2.655795]  notify_cpu_starting+0x9c/0xb8
[    2.655796]  secondary_start_kernel+0xdc/0x168
[    2.655798] ---[ end trace f68728a0d3053b9a ]---
[    2.655803] GICv3: CPU72: using allocated LPI pending table 
@0x000000007ae80000
[    2.655829] Xen: initializing cpu72
[    2.655842] CPU72: Booted secondary processor 0x0000000408 [0x481fd010]
[    2.685028] Detected VIPT I-cache on CPU73
[    2.685140] GICv3: CPU73: found redistributor 409 region 
36:0x00000000aa220000
[    2.691832] ------------[ cut here ]------------
[    2.691836] WARNING: CPU: 73 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.691837] Modules linked in:
[    2.691839] CPU: 73 PID: 0 Comm: swapper/73 Tainted: G W         
5.5.0-rc5 #132
[    2.691841] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.691842] pc : its_cpu_init+0x2f0/0x494
[    2.691844] lr : its_cpu_init+0x2ec/0x494
[    2.691844] sp : ffff800012433ee0
[    2.691845] x29: ffff800012433ee0 x28: 0000000000000000
[    2.691846] x27: 0000000000000000 x26: 0000000000000000
[    2.691847] x25: 0000000000000000 x24: ffff800012fe0000
[    2.691848] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.691849] x21: ffff8000117a9000 x20: fffffe0001cba400
[    2.691850] x19: ffff8000117db000 x18: 0000000000000000
[    2.691851] x17: 0000000000000000 x16: 0000000000000000
[    2.691852] x15: 0000000000000000 x14: 0000000000000000
[    2.691853] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.691854] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.691855] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.691856] x7 : 0000000000000000 x6 : 0000000000000070
[    2.691857] x5 : 00000000a0a0a0a0 x4 : ffffa0260df52000
[    2.691858] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.691859] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.691860] Call trace:
[    2.691862]  its_cpu_init+0x2f0/0x494
[    2.691863]  gic_starting_cpu+0x18/0x24
[    2.691864]  cpuhp_invoke_callback+0x84/0x1e0
[    2.691866]  notify_cpu_starting+0x9c/0xb8
[    2.691867]  secondary_start_kernel+0xdc/0x168
[    2.691868] ---[ end trace f68728a0d3053b9b ]---
[    2.691873] GICv3: CPU73: using allocated LPI pending table 
@0x000000007ae90000
[    2.691896] Xen: initializing cpu73
[    2.691904] CPU73: Booted secondary processor 0x0000000409 [0x481fd010]
[    2.721117] Detected VIPT I-cache on CPU74
[    2.721229] GICv3: CPU74: found redistributor 40a region 
37:0x00000000aa240000
[    2.727923] ------------[ cut here ]------------
[    2.727926] WARNING: CPU: 74 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.727927] Modules linked in:
[    2.727929] CPU: 74 PID: 0 Comm: swapper/74 Tainted: G W         
5.5.0-rc5 #132
[    2.727931] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.727932] pc : its_cpu_init+0x2f0/0x494
[    2.727934] lr : its_cpu_init+0x2ec/0x494
[    2.727934] sp : ffff80001248bee0
[    2.727935] x29: ffff80001248bee0 x28: 0000000000000000
[    2.727936] x27: 0000000000000000 x26: 0000000000000000
[    2.727937] x25: 0000000000000000 x24: ffff800013040000
[    2.727938] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.727939] x21: ffff8000117a9000 x20: fffffe0001cba800
[    2.727940] x19: ffff8000117db000 x18: 0000000000000000
[    2.727941] x17: 0000000000000000 x16: 0000000000000000
[    2.727942] x15: 0000000000000000 x14: 0000000000000000
[    2.727943] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.727944] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.727945] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.727946] x7 : 0000000000000000 x6 : 0000000000000070
[    2.727947] x5 : 00000000a0a0a0a0 x4 : ffffa0260df68000
[    2.727947] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.727948] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.727950] Call trace:
[    2.727951]  its_cpu_init+0x2f0/0x494
[    2.727953]  gic_starting_cpu+0x18/0x24
[    2.727954]  cpuhp_invoke_callback+0x84/0x1e0
[    2.727955]  notify_cpu_starting+0x9c/0xb8
[    2.727957]  secondary_start_kernel+0xdc/0x168
[    2.727957] ---[ end trace f68728a0d3053b9c ]---
[    2.727963] GICv3: CPU74: using allocated LPI pending table 
@0x000000007aea0000
[    2.727985] Xen: initializing cpu74
[    2.727994] CPU74: Booted secondary processor 0x000000040a [0x481fd010]
[    2.757205] Detected VIPT I-cache on CPU75
[    2.757318] GICv3: CPU75: found redistributor 40b region 
37:0x00000000aa260000
[    2.764012] ------------[ cut here ]------------
[    2.764016] WARNING: CPU: 75 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.764016] Modules linked in:
[    2.764018] CPU: 75 PID: 0 Comm: swapper/75 Tainted: G W         
5.5.0-rc5 #132
[    2.764020] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.764021] pc : its_cpu_init+0x2f0/0x494
[    2.764023] lr : its_cpu_init+0x2ec/0x494
[    2.764023] sp : ffff800012493ee0
[    2.764024] x29: ffff800012493ee0 x28: 0000000000000000
[    2.764025] x27: 0000000000000000 x26: 0000000000000000
[    2.764026] x25: 0000000000000000 x24: ffff800013060000
[    2.764027] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.764028] x21: ffff8000117a9000 x20: fffffe0001cbac00
[    2.764029] x19: ffff8000117db000 x18: 0000000000000000
[    2.764030] x17: 0000000000000000 x16: 0000000000000000
[    2.764031] x15: 0000000000000000 x14: 0000000000000000
[    2.764032] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.764033] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.764034] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.764035] x7 : 0000000000000000 x6 : 0000000000000070
[    2.764036] x5 : 00000000a0a0a0a0 x4 : ffffa0260df7e000
[    2.764037] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.764038] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.764039] Call trace:
[    2.764041]  its_cpu_init+0x2f0/0x494
[    2.764042]  gic_starting_cpu+0x18/0x24
[    2.764043]  cpuhp_invoke_callback+0x84/0x1e0
[    2.764045]  notify_cpu_starting+0x9c/0xb8
[    2.764046]  secondary_start_kernel+0xdc/0x168
[    2.764047] ---[ end trace f68728a0d3053b9d ]---
[    2.764052] GICv3: CPU75: using allocated LPI pending table 
@0x000000007aeb0000
[    2.764080] Xen: initializing cpu75
[    2.764089] CPU75: Booted secondary processor 0x000000040b [0x481fd010]
[    2.793305] Detected VIPT I-cache on CPU76
[    2.793423] GICv3: CPU76: found redistributor 40c region 
38:0x00000000aa280000
[    2.800122] ------------[ cut here ]------------
[    2.800126] WARNING: CPU: 76 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.800126] Modules linked in:
[    2.800129] CPU: 76 PID: 0 Comm: swapper/76 Tainted: G W         
5.5.0-rc5 #132
[    2.800130] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.800132] pc : its_cpu_init+0x2f0/0x494
[    2.800133] lr : its_cpu_init+0x2ec/0x494
[    2.800134] sp : ffff80001249bee0
[    2.800135] x29: ffff80001249bee0 x28: 0000000000000000
[    2.800136] x27: 0000000000000000 x26: 0000000000000000
[    2.800137] x25: 0000000000000000 x24: ffff8000130c0000
[    2.800138] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.800139] x21: ffff8000117a9000 x20: fffffe0001cbb000
[    2.800140] x19: ffff8000117db000 x18: 0000000000000000
[    2.800141] x17: 0000000000000000 x16: 0000000000000000
[    2.800142] x15: 0000000000000000 x14: 0000000000000000
[    2.800143] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.800144] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.800145] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.800146] x7 : 0000000000000000 x6 : 0000000000000070
[    2.800147] x5 : 00000000a0a0a0a0 x4 : ffffa0260df94000
[    2.800148] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.800149] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.800150] Call trace:
[    2.800152]  its_cpu_init+0x2f0/0x494
[    2.800153]  gic_starting_cpu+0x18/0x24
[    2.800154]  cpuhp_invoke_callback+0x84/0x1e0
[    2.800155]  notify_cpu_starting+0x9c/0xb8
[    2.800157]  secondary_start_kernel+0xdc/0x168
[    2.800158] ---[ end trace f68728a0d3053b9e ]---
[    2.800163] GICv3: CPU76: using allocated LPI pending table 
@0x000000007aec0000
[    2.800194] Xen: initializing cpu76
[    2.800208] CPU76: Booted secondary processor 0x000000040c [0x481fd010]
[    2.829388] Detected VIPT I-cache on CPU77
[    2.829504] GICv3: CPU77: found redistributor 40d region 
38:0x00000000aa2a0000
[    2.836196] ------------[ cut here ]------------
[    2.836200] WARNING: CPU: 77 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.836201] Modules linked in:
[    2.836203] CPU: 77 PID: 0 Comm: swapper/77 Tainted: G W         
5.5.0-rc5 #132
[    2.836204] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.836206] pc : its_cpu_init+0x2f0/0x494
[    2.836207] lr : its_cpu_init+0x2ec/0x494
[    2.836208] sp : ffff8000124a3ee0
[    2.836208] x29: ffff8000124a3ee0 x28: 0000000000000000
[    2.836209] x27: 0000000000000000 x26: 0000000000000000
[    2.836210] x25: 0000000000000000 x24: ffff8000130e0000
[    2.836212] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.836212] x21: ffff8000117a9000 x20: fffffe0001cbb400
[    2.836214] x19: ffff8000117db000 x18: 0000000000000000
[    2.836214] x17: 0000000000000000 x16: 0000000000000000
[    2.836215] x15: 0000000000000000 x14: 0000000000000000
[    2.836216] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.836217] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.836218] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.836219] x7 : 0000000000000000 x6 : 0000000000000070
[    2.836220] x5 : 00000000a0a0a0a0 x4 : ffffa0260dfaa000
[    2.836221] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.836222] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.836223] Call trace:
[    2.836225]  its_cpu_init+0x2f0/0x494
[    2.836226]  gic_starting_cpu+0x18/0x24
[    2.836227]  cpuhp_invoke_callback+0x84/0x1e0
[    2.836229]  notify_cpu_starting+0x9c/0xb8
[    2.836230]  secondary_start_kernel+0xdc/0x168
[    2.836231] ---[ end trace f68728a0d3053b9f ]---
[    2.836236] GICv3: CPU77: using allocated LPI pending table 
@0x000000007aed0000
[    2.836261] Xen: initializing cpu77
[    2.836271] CPU77: Booted secondary processor 0x000000040d [0x481fd010]
[    2.865492] Detected VIPT I-cache on CPU78
[    2.865609] GICv3: CPU78: found redistributor 40e region 
39:0x00000000aa2c0000
[    2.872301] ------------[ cut here ]------------
[    2.872304] WARNING: CPU: 78 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.872305] Modules linked in:
[    2.872307] CPU: 78 PID: 0 Comm: swapper/78 Tainted: G W         
5.5.0-rc5 #132
[    2.872308] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.872310] pc : its_cpu_init+0x2f0/0x494
[    2.872311] lr : its_cpu_init+0x2ec/0x494
[    2.872312] sp : ffff8000124abee0
[    2.872312] x29: ffff8000124abee0 x28: 0000000000000000
[    2.872314] x27: 0000000000000000 x26: 0000000000000000
[    2.872315] x25: 0000000000000000 x24: ffff800013140000
[    2.872316] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.872317] x21: ffff8000117a9000 x20: fffffe0001cbb800
[    2.872318] x19: ffff8000117db000 x18: 0000000000000000
[    2.872319] x17: 0000000000000000 x16: 0000000000000000
[    2.872320] x15: 0000000000000000 x14: 0000000000000000
[    2.872321] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.872322] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.872323] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.872324] x7 : 0000000000000000 x6 : 0000000000000070
[    2.872325] x5 : 00000000a0a0a0a0 x4 : ffffa0260dfc0000
[    2.872325] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.872326] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.872328] Call trace:
[    2.872329]  its_cpu_init+0x2f0/0x494
[    2.872330]  gic_starting_cpu+0x18/0x24
[    2.872332]  cpuhp_invoke_callback+0x84/0x1e0
[    2.872333]  notify_cpu_starting+0x9c/0xb8
[    2.872334]  secondary_start_kernel+0xdc/0x168
[    2.872335] ---[ end trace f68728a0d3053ba0 ]---
[    2.872340] GICv3: CPU78: using allocated LPI pending table 
@0x000000007aee0000
[    2.872364] Xen: initializing cpu78
[    2.872374] CPU78: Booted secondary processor 0x000000040e [0x481fd010]
[    2.901571] Detected VIPT I-cache on CPU79
[    2.901688] GICv3: CPU79: found redistributor 40f region 
39:0x00000000aa2e0000
[    2.908379] ------------[ cut here ]------------
[    2.908383] WARNING: CPU: 79 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.908383] Modules linked in:
[    2.908386] CPU: 79 PID: 0 Comm: swapper/79 Tainted: G W         
5.5.0-rc5 #132
[    2.908387] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.908389] pc : its_cpu_init+0x2f0/0x494
[    2.908390] lr : its_cpu_init+0x2ec/0x494
[    2.908391] sp : ffff8000124b3ee0
[    2.908391] x29: ffff8000124b3ee0 x28: 0000000000000000
[    2.908393] x27: 0000000000000000 x26: 0000000000000000
[    2.908394] x25: 0000000000000000 x24: ffff800013160000
[    2.908395] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.908396] x21: ffff8000117a9000 x20: fffffe0001cbbc00
[    2.908396] x19: ffff8000117db000 x18: 0000000000000000
[    2.908397] x17: 0000000000000000 x16: 0000000000000000
[    2.908398] x15: 0000000000000000 x14: 0000000000000000
[    2.908399] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.908400] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.908401] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.908402] x7 : 0000000000000000 x6 : 0000000000000070
[    2.908403] x5 : 00000000a0a0a0a0 x4 : ffffa0260dfd6000
[    2.908404] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.908405] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.908407] Call trace:
[    2.908408]  its_cpu_init+0x2f0/0x494
[    2.908409]  gic_starting_cpu+0x18/0x24
[    2.908411]  cpuhp_invoke_callback+0x84/0x1e0
[    2.908412]  notify_cpu_starting+0x9c/0xb8
[    2.908413]  secondary_start_kernel+0xdc/0x168
[    2.908414] ---[ end trace f68728a0d3053ba1 ]---
[    2.908420] GICv3: CPU79: using allocated LPI pending table 
@0x000000007aef0000
[    2.908443] Xen: initializing cpu79
[    2.908453] CPU79: Booted secondary processor 0x000000040f [0x481fd010]
[    2.937666] Detected VIPT I-cache on CPU80
[    2.937792] GICv3: CPU80: found redistributor 500 region 
40:0x00000000aa300000
[    2.944491] ------------[ cut here ]------------
[    2.944495] WARNING: CPU: 80 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.944496] Modules linked in:
[    2.944498] CPU: 80 PID: 0 Comm: swapper/80 Tainted: G W         
5.5.0-rc5 #132
[    2.944500] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.944502] pc : its_cpu_init+0x2f0/0x494
[    2.944503] lr : its_cpu_init+0x2ec/0x494
[    2.944504] sp : ffff8000124bbee0
[    2.944504] x29: ffff8000124bbee0 x28: 0000000000000000
[    2.944505] x27: 0000000000000000 x26: 0000000000000000
[    2.944506] x25: 0000000000000000 x24: ffff8000131c0000
[    2.944508] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.944509] x21: ffff8000117a9000 x20: fffffe0001cbc000
[    2.944510] x19: ffff8000117db000 x18: 0000000000000000
[    2.944511] x17: 0000000000000000 x16: 0000000000000000
[    2.944512] x15: 0000000000000000 x14: 0000000000000000
[    2.944513] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.944514] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.944515] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.944516] x7 : 0000000000000000 x6 : 0000000000000070
[    2.944517] x5 : 00000000a0a0a0a0 x4 : ffffa0260dfec000
[    2.944518] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.944519] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.944520] Call trace:
[    2.944522]  its_cpu_init+0x2f0/0x494
[    2.944523]  gic_starting_cpu+0x18/0x24
[    2.944525]  cpuhp_invoke_callback+0x84/0x1e0
[    2.944526]  notify_cpu_starting+0x9c/0xb8
[    2.944527]  secondary_start_kernel+0xdc/0x168
[    2.944528] ---[ end trace f68728a0d3053ba2 ]---
[    2.944534] GICv3: CPU80: using allocated LPI pending table 
@0x000000007af00000
[    2.944559] Xen: initializing cpu80
[    2.944573] CPU80: Booted secondary processor 0x0000000500 [0x481fd010]
[    2.973746] Detected VIPT I-cache on CPU81
[    2.973869] GICv3: CPU81: found redistributor 501 region 
40:0x00000000aa320000
[    2.980561] ------------[ cut here ]------------
[    2.980565] WARNING: CPU: 81 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    2.980565] Modules linked in:
[    2.980568] CPU: 81 PID: 0 Comm: swapper/81 Tainted: G W         
5.5.0-rc5 #132
[    2.980569] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    2.980571] pc : its_cpu_init+0x2f0/0x494
[    2.980572] lr : its_cpu_init+0x2ec/0x494
[    2.980573] sp : ffff80001250bee0
[    2.980573] x29: ffff80001250bee0 x28: 0000000000000000
[    2.980575] x27: 0000000000000000 x26: 0000000000000000
[    2.980576] x25: 0000000000000000 x24: ffff8000131e0000
[    2.980577] x23: ffff8000111f4000 x22: ffff8000119cd000
[    2.980578] x21: ffff8000117a9000 x20: fffffe0001cbc400
[    2.980579] x19: ffff8000117db000 x18: 0000000000000000
[    2.980580] x17: 0000000000000000 x16: 0000000000000000
[    2.980581] x15: 0000000000000000 x14: 0000000000000000
[    2.980582] x13: 0000000000000000 x12: f4e33ba569c0a400
[    2.980583] x11: ffffffffffffffff x10: ffff8000119916a0
[    2.980584] x9 : 0000000000000000 x8 : ffff8000119916a0
[    2.980584] x7 : 0000000000000000 x6 : 0000000000000070
[    2.980585] x5 : 00000000a0a0a0a0 x4 : ffffa0260e002000
[    2.980586] x3 : 000000000000003d x2 : ffffffffffffffff
[    2.980587] x1 : 0000000000010000 x0 : 00000000ffffffed
[    2.980589] Call trace:
[    2.980590]  its_cpu_init+0x2f0/0x494
[    2.980592]  gic_starting_cpu+0x18/0x24
[    2.980593]  cpuhp_invoke_callback+0x84/0x1e0
[    2.980595]  notify_cpu_starting+0x9c/0xb8
[    2.980596]  secondary_start_kernel+0xdc/0x168
[    2.980597] ---[ end trace f68728a0d3053ba3 ]---
[    2.980602] GICv3: CPU81: using allocated LPI pending table 
@0x000000007af10000
[    2.980628] Xen: initializing cpu81
[    2.980637] CPU81: Booted secondary processor 0x0000000501 [0x481fd010]
[    3.009835] Detected VIPT I-cache on CPU82
[    3.009959] GICv3: CPU82: found redistributor 502 region 
41:0x00000000aa340000
[    3.016651] ------------[ cut here ]------------
[    3.016655] WARNING: CPU: 82 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.016655] Modules linked in:
[    3.016657] CPU: 82 PID: 0 Comm: swapper/82 Tainted: G W         
5.5.0-rc5 #132
[    3.016659] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.016660] pc : its_cpu_init+0x2f0/0x494
[    3.016662] lr : its_cpu_init+0x2ec/0x494
[    3.016662] sp : ffff800012513ee0
[    3.016663] x29: ffff800012513ee0 x28: 0000000000000000
[    3.016664] x27: 0000000000000000 x26: 0000000000000000
[    3.016665] x25: 0000000000000000 x24: ffff800013240000
[    3.016666] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.016667] x21: ffff8000117a9000 x20: fffffe0001cbc800
[    3.016668] x19: ffff8000117db000 x18: 0000000000000000
[    3.016669] x17: 0000000000000000 x16: 0000000000000000
[    3.016670] x15: 0000000000000000 x14: 0000000000000000
[    3.016671] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.016672] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.016673] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.016674] x7 : 0000000000000000 x6 : 0000000000000070
[    3.016675] x5 : 00000000a0a0a0a0 x4 : ffffa0260e018000
[    3.016676] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.016677] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.016678] Call trace:
[    3.016680]  its_cpu_init+0x2f0/0x494
[    3.016681]  gic_starting_cpu+0x18/0x24
[    3.016682]  cpuhp_invoke_callback+0x84/0x1e0
[    3.016684]  notify_cpu_starting+0x9c/0xb8
[    3.016685]  secondary_start_kernel+0xdc/0x168
[    3.016686] ---[ end trace f68728a0d3053ba4 ]---
[    3.016691] GICv3: CPU82: using allocated LPI pending table 
@0x000000007af20000
[    3.016716] Xen: initializing cpu82
[    3.016725] CPU82: Booted secondary processor 0x0000000502 [0x481fd010]
[    3.045925] Detected VIPT I-cache on CPU83
[    3.046049] GICv3: CPU83: found redistributor 503 region 
41:0x00000000aa360000
[    3.052741] ------------[ cut here ]------------
[    3.052745] WARNING: CPU: 83 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.052745] Modules linked in:
[    3.052748] CPU: 83 PID: 0 Comm: swapper/83 Tainted: G W         
5.5.0-rc5 #132
[    3.052749] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.052751] pc : its_cpu_init+0x2f0/0x494
[    3.052752] lr : its_cpu_init+0x2ec/0x494
[    3.052753] sp : ffff80001251bee0
[    3.052753] x29: ffff80001251bee0 x28: 0000000000000000
[    3.052754] x27: 0000000000000000 x26: 0000000000000000
[    3.052756] x25: 0000000000000000 x24: ffff800013260000
[    3.052757] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.052758] x21: ffff8000117a9000 x20: fffffe0001cbcc00
[    3.052758] x19: ffff8000117db000 x18: 0000000000000000
[    3.052759] x17: 0000000000000000 x16: 0000000000000000
[    3.052760] x15: 0000000000000000 x14: 0000000000000000
[    3.052761] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.052762] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.052763] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.052764] x7 : 0000000000000000 x6 : 0000000000000070
[    3.052765] x5 : 00000000a0a0a0a0 x4 : ffffa0260e02e000
[    3.052766] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.052767] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.052768] Call trace:
[    3.052770]  its_cpu_init+0x2f0/0x494
[    3.052771]  gic_starting_cpu+0x18/0x24
[    3.052773]  cpuhp_invoke_callback+0x84/0x1e0
[    3.052774]  notify_cpu_starting+0x9c/0xb8
[    3.052775]  secondary_start_kernel+0xdc/0x168
[    3.052776] ---[ end trace f68728a0d3053ba5 ]---
[    3.052782] GICv3: CPU83: using allocated LPI pending table 
@0x000000007af30000
[    3.052806] Xen: initializing cpu83
[    3.052815] CPU83: Booted secondary processor 0x0000000503 [0x481fd010]
[    3.082011] Detected VIPT I-cache on CPU84
[    3.082142] GICv3: CPU84: found redistributor 504 region 
42:0x00000000aa380000
[    3.088841] ------------[ cut here ]------------
[    3.088846] WARNING: CPU: 84 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.088846] Modules linked in:
[    3.088849] CPU: 84 PID: 0 Comm: swapper/84 Tainted: G W         
5.5.0-rc5 #132
[    3.088850] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.088852] pc : its_cpu_init+0x2f0/0x494
[    3.088853] lr : its_cpu_init+0x2ec/0x494
[    3.088854] sp : ffff800012523ee0
[    3.088855] x29: ffff800012523ee0 x28: 0000000000000000
[    3.088856] x27: 0000000000000000 x26: 0000000000000000
[    3.088857] x25: 0000000000000000 x24: ffff8000132c0000
[    3.088858] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.088859] x21: ffff8000117a9000 x20: fffffe0001cbd000
[    3.088860] x19: ffff8000117db000 x18: 0000000000000000
[    3.088861] x17: 0000000000000000 x16: 0000000000000000
[    3.088862] x15: 0000000000000000 x14: 0000000000000000
[    3.088863] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.088864] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.088865] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.088866] x7 : 0000000000000000 x6 : 0000000000000070
[    3.088867] x5 : 00000000a0a0a0a0 x4 : ffffa0260e044000
[    3.088868] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.088869] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.088871] Call trace:
[    3.088872]  its_cpu_init+0x2f0/0x494
[    3.088873]  gic_starting_cpu+0x18/0x24
[    3.088875]  cpuhp_invoke_callback+0x84/0x1e0
[    3.088876]  notify_cpu_starting+0x9c/0xb8
[    3.088878]  secondary_start_kernel+0xdc/0x168
[    3.088878] ---[ end trace f68728a0d3053ba6 ]---
[    3.088884] GICv3: CPU84: using allocated LPI pending table 
@0x000000007af40000
[    3.088912] Xen: initializing cpu84
[    3.088923] CPU84: Booted secondary processor 0x0000000504 [0x481fd010]
[    3.118074] Detected VIPT I-cache on CPU85
[    3.118199] GICv3: CPU85: found redistributor 505 region 
42:0x00000000aa3a0000
[    3.124890] ------------[ cut here ]------------
[    3.124894] WARNING: CPU: 85 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.124894] Modules linked in:
[    3.124897] CPU: 85 PID: 0 Comm: swapper/85 Tainted: G W         
5.5.0-rc5 #132
[    3.124898] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.124900] pc : its_cpu_init+0x2f0/0x494
[    3.124901] lr : its_cpu_init+0x2ec/0x494
[    3.124902] sp : ffff80001252bee0
[    3.124902] x29: ffff80001252bee0 x28: 0000000000000000
[    3.124904] x27: 0000000000000000 x26: 0000000000000000
[    3.124905] x25: 0000000000000000 x24: ffff8000132e0000
[    3.124906] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.124906] x21: ffff8000117a9000 x20: fffffe0001cbd400
[    3.124907] x19: ffff8000117db000 x18: 0000000000000000
[    3.124908] x17: 0000000000000000 x16: 0000000000000000
[    3.124909] x15: 0000000000000000 x14: 0000000000000000
[    3.124910] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.124911] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.124912] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.124913] x7 : 0000000000000000 x6 : 0000000000000070
[    3.124914] x5 : 00000000a0a0a0a0 x4 : ffffa0260e05a000
[    3.124915] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.124916] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.124918] Call trace:
[    3.124919]  its_cpu_init+0x2f0/0x494
[    3.124921]  gic_starting_cpu+0x18/0x24
[    3.124922]  cpuhp_invoke_callback+0x84/0x1e0
[    3.124923]  notify_cpu_starting+0x9c/0xb8
[    3.124925]  secondary_start_kernel+0xdc/0x168
[    3.124925] ---[ end trace f68728a0d3053ba7 ]---
[    3.124931] GICv3: CPU85: using allocated LPI pending table 
@0x000000007af50000
[    3.124956] Xen: initializing cpu85
[    3.124966] CPU85: Booted secondary processor 0x0000000505 [0x481fd010]
[    3.154146] Detected VIPT I-cache on CPU86
[    3.154272] GICv3: CPU86: found redistributor 506 region 
43:0x00000000aa3c0000
[    3.160964] ------------[ cut here ]------------
[    3.160967] WARNING: CPU: 86 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.160968] Modules linked in:
[    3.160970] CPU: 86 PID: 0 Comm: swapper/86 Tainted: G W         
5.5.0-rc5 #132
[    3.160972] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.160973] pc : its_cpu_init+0x2f0/0x494
[    3.160975] lr : its_cpu_init+0x2ec/0x494
[    3.160975] sp : ffff800012533ee0
[    3.160976] x29: ffff800012533ee0 x28: 0000000000000000
[    3.160977] x27: 0000000000000000 x26: 0000000000000000
[    3.160978] x25: 0000000000000000 x24: ffff800013340000
[    3.160979] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.160980] x21: ffff8000117a9000 x20: fffffe0001cbd800
[    3.160981] x19: ffff8000117db000 x18: 0000000000000000
[    3.160982] x17: 0000000000000000 x16: 0000000000000000
[    3.160983] x15: 0000000000000000 x14: 0000000000000000
[    3.160984] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.160985] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.160986] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.160987] x7 : 0000000000000000 x6 : 0000000000000070
[    3.160988] x5 : 00000000a0a0a0a0 x4 : ffffa0260e070000
[    3.160989] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.160990] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.160992] Call trace:
[    3.160993]  its_cpu_init+0x2f0/0x494
[    3.160994]  gic_starting_cpu+0x18/0x24
[    3.160996]  cpuhp_invoke_callback+0x84/0x1e0
[    3.160997]  notify_cpu_starting+0x9c/0xb8
[    3.160998]  secondary_start_kernel+0xdc/0x168
[    3.160999] ---[ end trace f68728a0d3053ba8 ]---
[    3.161004] GICv3: CPU86: using allocated LPI pending table 
@0x000000007af60000
[    3.161029] Xen: initializing cpu86
[    3.161039] CPU86: Booted secondary processor 0x0000000506 [0x481fd010]
[    3.190212] Detected VIPT I-cache on CPU87
[    3.190339] GICv3: CPU87: found redistributor 507 region 
43:0x00000000aa3e0000
[    3.197031] ------------[ cut here ]------------
[    3.197035] WARNING: CPU: 87 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.197036] Modules linked in:
[    3.197038] CPU: 87 PID: 0 Comm: swapper/87 Tainted: G W         
5.5.0-rc5 #132
[    3.197039] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.197041] pc : its_cpu_init+0x2f0/0x494
[    3.197042] lr : its_cpu_init+0x2ec/0x494
[    3.197043] sp : ffff80001258bee0
[    3.197043] x29: ffff80001258bee0 x28: 0000000000000000
[    3.197045] x27: 0000000000000000 x26: 0000000000000000
[    3.197046] x25: 0000000000000000 x24: ffff800013360000
[    3.197047] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.197048] x21: ffff8000117a9000 x20: fffffe0001cbdc00
[    3.197049] x19: ffff8000117db000 x18: 0000000000000000
[    3.197050] x17: 0000000000000000 x16: 0000000000000000
[    3.197051] x15: 0000000000000000 x14: 0000000000000000
[    3.197052] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.197053] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.197054] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.197055] x7 : 0000000000000000 x6 : 0000000000000070
[    3.197056] x5 : 00000000a0a0a0a0 x4 : ffffa0260e086000
[    3.197057] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.197058] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.197059] Call trace:
[    3.197060]  its_cpu_init+0x2f0/0x494
[    3.197061]  gic_starting_cpu+0x18/0x24
[    3.197063]  cpuhp_invoke_callback+0x84/0x1e0
[    3.197064]  notify_cpu_starting+0x9c/0xb8
[    3.197065]  secondary_start_kernel+0xdc/0x168
[    3.197066] ---[ end trace f68728a0d3053ba9 ]---
[    3.197071] GICv3: CPU87: using allocated LPI pending table 
@0x000000007af70000
[    3.197095] Xen: initializing cpu87
[    3.197106] CPU87: Booted secondary processor 0x0000000507 [0x481fd010]
[    3.226287] Detected VIPT I-cache on CPU88
[    3.226424] GICv3: CPU88: found redistributor 508 region 
44:0x00000000aa400000
[    3.233124] ------------[ cut here ]------------
[    3.233129] WARNING: CPU: 88 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.233129] Modules linked in:
[    3.233132] CPU: 88 PID: 0 Comm: swapper/88 Tainted: G W         
5.5.0-rc5 #132
[    3.233133] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.233135] pc : its_cpu_init+0x2f0/0x494
[    3.233136] lr : its_cpu_init+0x2ec/0x494
[    3.233137] sp : ffff800012593ee0
[    3.233138] x29: ffff800012593ee0 x28: 0000000000000000
[    3.233139] x27: 0000000000000000 x26: 0000000000000000
[    3.233140] x25: 0000000000000000 x24: ffff8000133c0000
[    3.233141] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.233142] x21: ffff8000117a9000 x20: fffffe0001cbe000
[    3.233143] x19: ffff8000117db000 x18: 0000000000000000
[    3.233144] x17: 0000000000000000 x16: 0000000000000000
[    3.233145] x15: 0000000000000000 x14: 0000000000000000
[    3.233146] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.233147] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.233148] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.233149] x7 : 0000000000000000 x6 : 0000000000000070
[    3.233150] x5 : 00000000a0a0a0a0 x4 : ffffa0260e09c000
[    3.233151] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.233151] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.233153] Call trace:
[    3.233155]  its_cpu_init+0x2f0/0x494
[    3.233156]  gic_starting_cpu+0x18/0x24
[    3.233157]  cpuhp_invoke_callback+0x84/0x1e0
[    3.233159]  notify_cpu_starting+0x9c/0xb8
[    3.233160]  secondary_start_kernel+0xdc/0x168
[    3.233161] ---[ end trace f68728a0d3053baa ]---
[    3.233167] GICv3: CPU88: using allocated LPI pending table 
@0x000000007af80000
[    3.233194] Xen: initializing cpu88
[    3.233206] CPU88: Booted secondary processor 0x0000000508 [0x481fd010]
[    3.262353] Detected VIPT I-cache on CPU89
[    3.262486] GICv3: CPU89: found redistributor 509 region 
44:0x00000000aa420000
[    3.269178] ------------[ cut here ]------------
[    3.269182] WARNING: CPU: 89 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.269183] Modules linked in:
[    3.269185] CPU: 89 PID: 0 Comm: swapper/89 Tainted: G W         
5.5.0-rc5 #132
[    3.269186] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.269188] pc : its_cpu_init+0x2f0/0x494
[    3.269190] lr : its_cpu_init+0x2ec/0x494
[    3.269190] sp : ffff80001259bee0
[    3.269191] x29: ffff80001259bee0 x28: 0000000000000000
[    3.269192] x27: 0000000000000000 x26: 0000000000000000
[    3.269193] x25: 0000000000000000 x24: ffff8000133e0000
[    3.269194] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.269195] x21: ffff8000117a9000 x20: fffffe0001cbe400
[    3.269196] x19: ffff8000117db000 x18: 0000000000000000
[    3.269197] x17: 0000000000000000 x16: 0000000000000000
[    3.269198] x15: 0000000000000000 x14: 0000000000000000
[    3.269199] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.269200] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.269201] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.269202] x7 : 0000000000000000 x6 : 0000000000000070
[    3.269203] x5 : 00000000a0a0a0a0 x4 : ffffa0260e0b2000
[    3.269204] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.269205] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.269206] Call trace:
[    3.269208]  its_cpu_init+0x2f0/0x494
[    3.269209]  gic_starting_cpu+0x18/0x24
[    3.269210]  cpuhp_invoke_callback+0x84/0x1e0
[    3.269211]  notify_cpu_starting+0x9c/0xb8
[    3.269213]  secondary_start_kernel+0xdc/0x168
[    3.269213] ---[ end trace f68728a0d3053bab ]---
[    3.269219] GICv3: CPU89: using allocated LPI pending table 
@0x000000007af90000
[    3.269242] Xen: initializing cpu89
[    3.269252] CPU89: Booted secondary processor 0x0000000509 [0x481fd010]
[    3.298425] Detected VIPT I-cache on CPU90
[    3.298558] GICv3: CPU90: found redistributor 50a region 
45:0x00000000aa440000
[    3.305249] ------------[ cut here ]------------
[    3.305253] WARNING: CPU: 90 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.305253] Modules linked in:
[    3.305256] CPU: 90 PID: 0 Comm: swapper/90 Tainted: G W         
5.5.0-rc5 #132
[    3.305257] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.305259] pc : its_cpu_init+0x2f0/0x494
[    3.305260] lr : its_cpu_init+0x2ec/0x494
[    3.305261] sp : ffff8000125a3ee0
[    3.305261] x29: ffff8000125a3ee0 x28: 0000000000000000
[    3.305263] x27: 0000000000000000 x26: 0000000000000000
[    3.305264] x25: 0000000000000000 x24: ffff800013440000
[    3.305265] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.305266] x21: ffff8000117a9000 x20: fffffe0001cbe800
[    3.305267] x19: ffff8000117db000 x18: 0000000000000000
[    3.305268] x17: 0000000000000000 x16: 0000000000000000
[    3.305268] x15: 0000000000000000 x14: 0000000000000000
[    3.305269] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.305270] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.305271] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.305272] x7 : 0000000000000000 x6 : 0000000000000070
[    3.305273] x5 : 00000000a0a0a0a0 x4 : ffffa0260e0c8000
[    3.305274] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.305275] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.305277] Call trace:
[    3.305278]  its_cpu_init+0x2f0/0x494
[    3.305279]  gic_starting_cpu+0x18/0x24
[    3.305281]  cpuhp_invoke_callback+0x84/0x1e0
[    3.305282]  notify_cpu_starting+0x9c/0xb8
[    3.305283]  secondary_start_kernel+0xdc/0x168
[    3.305284] ---[ end trace f68728a0d3053bac ]---
[    3.305289] GICv3: CPU90: using allocated LPI pending table 
@0x000000007afa0000
[    3.305311] Xen: initializing cpu90
[    3.305321] CPU90: Booted secondary processor 0x000000050a [0x481fd010]
[    3.334512] Detected VIPT I-cache on CPU91
[    3.334646] GICv3: CPU91: found redistributor 50b region 
45:0x00000000aa460000
[    3.341338] ------------[ cut here ]------------
[    3.341342] WARNING: CPU: 91 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.341342] Modules linked in:
[    3.341345] CPU: 91 PID: 0 Comm: swapper/91 Tainted: G W         
5.5.0-rc5 #132
[    3.341346] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.341348] pc : its_cpu_init+0x2f0/0x494
[    3.341349] lr : its_cpu_init+0x2ec/0x494
[    3.341350] sp : ffff8000125abee0
[    3.341351] x29: ffff8000125abee0 x28: 0000000000000000
[    3.341352] x27: 0000000000000000 x26: 0000000000000000
[    3.341353] x25: 0000000000000000 x24: ffff800013460000
[    3.341354] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.341355] x21: ffff8000117a9000 x20: fffffe0001cbec00
[    3.341356] x19: ffff8000117db000 x18: 0000000000000000
[    3.341356] x17: 0000000000000000 x16: 0000000000000000
[    3.341357] x15: 0000000000000000 x14: 0000000000000000
[    3.341358] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.341359] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.341360] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.341361] x7 : 0000000000000000 x6 : 0000000000000070
[    3.341362] x5 : 00000000a0a0a0a0 x4 : ffffa0260e0de000
[    3.341363] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.341364] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.341366] Call trace:
[    3.341367]  its_cpu_init+0x2f0/0x494
[    3.341368]  gic_starting_cpu+0x18/0x24
[    3.341370]  cpuhp_invoke_callback+0x84/0x1e0
[    3.341371]  notify_cpu_starting+0x9c/0xb8
[    3.341372]  secondary_start_kernel+0xdc/0x168
[    3.341373] ---[ end trace f68728a0d3053bad ]---
[    3.341378] GICv3: CPU91: using allocated LPI pending table 
@0x000000007afb0000
[    3.341400] Xen: initializing cpu91
[    3.341410] CPU91: Booted secondary processor 0x000000050b [0x481fd010]
[    3.370588] Detected VIPT I-cache on CPU92
[    3.370731] GICv3: CPU92: found redistributor 50c region 
46:0x00000000aa480000
[    3.377431] ------------[ cut here ]------------
[    3.377436] WARNING: CPU: 92 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.377436] Modules linked in:
[    3.377439] CPU: 92 PID: 0 Comm: swapper/92 Tainted: G W         
5.5.0-rc5 #132
[    3.377441] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.377442] pc : its_cpu_init+0x2f0/0x494
[    3.377444] lr : its_cpu_init+0x2ec/0x494
[    3.377444] sp : ffff8000125b3ee0
[    3.377445] x29: ffff8000125b3ee0 x28: 0000000000000000
[    3.377446] x27: 0000000000000000 x26: 0000000000000000
[    3.377448] x25: 0000000000000000 x24: ffff8000134c0000
[    3.377449] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.377450] x21: ffff8000117a9000 x20: fffffe0001cbf000
[    3.377451] x19: ffff8000117db000 x18: 0000000000000000
[    3.377452] x17: 0000000000000000 x16: 0000000000000000
[    3.377452] x15: 0000000000000000 x14: 0000000000000000
[    3.377453] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.377454] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.377455] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.377456] x7 : 0000000000000000 x6 : 0000000000000070
[    3.377457] x5 : 00000000a0a0a0a0 x4 : ffffa0260e0f4000
[    3.377458] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.377459] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.377461] Call trace:
[    3.377462]  its_cpu_init+0x2f0/0x494
[    3.377464]  gic_starting_cpu+0x18/0x24
[    3.377465]  cpuhp_invoke_callback+0x84/0x1e0
[    3.377466]  notify_cpu_starting+0x9c/0xb8
[    3.377468]  secondary_start_kernel+0xdc/0x168
[    3.377469] ---[ end trace f68728a0d3053bae ]---
[    3.377474] GICv3: CPU92: using allocated LPI pending table 
@0x000000007afc0000
[    3.377499] Xen: initializing cpu92
[    3.377511] CPU92: Booted secondary processor 0x000000050c [0x481fd010]
[    3.406656] Detected VIPT I-cache on CPU93
[    3.406792] GICv3: CPU93: found redistributor 50d region 
46:0x00000000aa4a0000
[    3.413484] ------------[ cut here ]------------
[    3.413488] WARNING: CPU: 93 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.413489] Modules linked in:
[    3.413491] CPU: 93 PID: 0 Comm: swapper/93 Tainted: G W         
5.5.0-rc5 #132
[    3.413492] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.413494] pc : its_cpu_init+0x2f0/0x494
[    3.413495] lr : its_cpu_init+0x2ec/0x494
[    3.413496] sp : ffff8000125bbee0
[    3.413497] x29: ffff8000125bbee0 x28: 0000000000000000
[    3.413498] x27: 0000000000000000 x26: 0000000000000000
[    3.413499] x25: 0000000000000000 x24: ffff8000134e0000
[    3.413500] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.413501] x21: ffff8000117a9000 x20: fffffe0001cbf400
[    3.413502] x19: ffff8000117db000 x18: 0000000000000000
[    3.413503] x17: 0000000000000000 x16: 0000000000000000
[    3.413504] x15: 0000000000000000 x14: 0000000000000000
[    3.413505] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.413506] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.413507] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.413508] x7 : 0000000000000000 x6 : 0000000000000070
[    3.413509] x5 : 00000000a0a0a0a0 x4 : ffffa0260e10a000
[    3.413510] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.413511] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.413513] Call trace:
[    3.413514]  its_cpu_init+0x2f0/0x494
[    3.413515]  gic_starting_cpu+0x18/0x24
[    3.413517]  cpuhp_invoke_callback+0x84/0x1e0
[    3.413518]  notify_cpu_starting+0x9c/0xb8
[    3.413519]  secondary_start_kernel+0xdc/0x168
[    3.413520] ---[ end trace f68728a0d3053baf ]---
[    3.413525] GICv3: CPU93: using allocated LPI pending table 
@0x000000007afd0000
[    3.413547] Xen: initializing cpu93
[    3.413557] CPU93: Booted secondary processor 0x000000050d [0x481fd010]
[    3.442724] Detected VIPT I-cache on CPU94
[    3.442861] GICv3: CPU94: found redistributor 50e region 
47:0x00000000aa4c0000
[    3.449553] ------------[ cut here ]------------
[    3.449557] WARNING: CPU: 94 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.449558] Modules linked in:
[    3.449560] CPU: 94 PID: 0 Comm: swapper/94 Tainted: G W         
5.5.0-rc5 #132
[    3.449561] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.449563] pc : its_cpu_init+0x2f0/0x494
[    3.449565] lr : its_cpu_init+0x2ec/0x494
[    3.449565] sp : ffff80001260bee0
[    3.449566] x29: ffff80001260bee0 x28: 0000000000000000
[    3.449567] x27: 0000000000000000 x26: 0000000000000000
[    3.449568] x25: 0000000000000000 x24: ffff800013540000
[    3.449569] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.449570] x21: ffff8000117a9000 x20: fffffe0001cbf800
[    3.449571] x19: ffff8000117db000 x18: 0000000000000000
[    3.449572] x17: 0000000000000000 x16: 0000000000000000
[    3.449573] x15: 0000000000000000 x14: 0000000000000000
[    3.449574] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.449575] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.449576] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.449577] x7 : 0000000000000000 x6 : 0000000000000070
[    3.449578] x5 : 00000000a0a0a0a0 x4 : ffffa0260e120000
[    3.449579] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.449580] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.449581] Call trace:
[    3.449582]  its_cpu_init+0x2f0/0x494
[    3.449584]  gic_starting_cpu+0x18/0x24
[    3.449585]  cpuhp_invoke_callback+0x84/0x1e0
[    3.449586]  notify_cpu_starting+0x9c/0xb8
[    3.449588]  secondary_start_kernel+0xdc/0x168
[    3.449588] ---[ end trace f68728a0d3053bb0 ]---
[    3.449594] GICv3: CPU94: using allocated LPI pending table 
@0x000000007afe0000
[    3.449615] Xen: initializing cpu94
[    3.449625] CPU94: Booted secondary processor 0x000000050e [0x481fd010]
[    3.478796] Detected VIPT I-cache on CPU95
[    3.478935] GICv3: CPU95: found redistributor 50f region 
47:0x00000000aa4e0000
[    3.485629] ------------[ cut here ]------------
[    3.485633] WARNING: CPU: 95 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.485633] Modules linked in:
[    3.485636] CPU: 95 PID: 0 Comm: swapper/95 Tainted: G W         
5.5.0-rc5 #132
[    3.485637] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.485639] pc : its_cpu_init+0x2f0/0x494
[    3.485640] lr : its_cpu_init+0x2ec/0x494
[    3.485641] sp : ffff800012613ee0
[    3.485641] x29: ffff800012613ee0 x28: 0000000000000000
[    3.485643] x27: 0000000000000000 x26: 0000000000000000
[    3.485644] x25: 0000000000000000 x24: ffff800013560000
[    3.485645] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.485646] x21: ffff8000117a9000 x20: fffffe0001cbfc00
[    3.485647] x19: ffff8000117db000 x18: 0000000000000000
[    3.485648] x17: 0000000000000000 x16: 0000000000000000
[    3.485648] x15: 0000000000000000 x14: 0000000000000000
[    3.485649] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.485650] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.485651] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.485652] x7 : 0000000000000000 x6 : 0000000000000070
[    3.485653] x5 : 00000000a0a0a0a0 x4 : ffffa0260e136000
[    3.485654] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.485655] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.485657] Call trace:
[    3.485658]  its_cpu_init+0x2f0/0x494
[    3.485659]  gic_starting_cpu+0x18/0x24
[    3.485661]  cpuhp_invoke_callback+0x84/0x1e0
[    3.485662]  notify_cpu_starting+0x9c/0xb8
[    3.485663]  secondary_start_kernel+0xdc/0x168
[    3.485664] ---[ end trace f68728a0d3053bb1 ]---
[    3.485669] GICv3: CPU95: using allocated LPI pending table 
@0x000000007aff0000
[    3.485691] Xen: initializing cpu95
[    3.485701] CPU95: Booted secondary processor 0x000000050f [0x481fd010]
[    3.514893] Detected VIPT I-cache on CPU96
[    3.515073] GICv3: CPU96: found redistributor 600 region 
48:0x00000000aa500000
[    3.521792] ------------[ cut here ]------------
[    3.521804] WARNING: CPU: 96 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.521805] Modules linked in:
[    3.521811] CPU: 96 PID: 0 Comm: swapper/96 Tainted: G W         
5.5.0-rc5 #132
[    3.521813] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.521815] pc : its_cpu_init+0x2f0/0x494
[    3.521816] lr : its_cpu_init+0x2ec/0x494
[    3.521817] sp : ffff80001261bee0
[    3.521817] x29: ffff80001261bee0 x28: 0000000000000000
[    3.521819] x27: 0000000000000000 x26: 0000000000000000
[    3.521820] x25: 0000000000000000 x24: ffff8000135c0000
[    3.521821] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.521822] x21: ffff8000117a9000 x20: fffffe0001ca0000
[    3.521823] x19: ffff8000117db000 x18: 0000000000000000
[    3.521824] x17: 0000000000000000 x16: 0000000000000000
[    3.521825] x15: 0000000000000000 x14: 0000000000000000
[    3.521826] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.521827] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.521828] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.521829] x7 : 0000000000000000 x6 : 0000000000000070
[    3.521830] x5 : 00000000a0a0a0a0 x4 : ffffa02609967000
[    3.521831] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.521832] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.521834] Call trace:
[    3.521836]  its_cpu_init+0x2f0/0x494
[    3.521838]  gic_starting_cpu+0x18/0x24
[    3.521841]  cpuhp_invoke_callback+0x84/0x1e0
[    3.521843]  notify_cpu_starting+0x9c/0xb8
[    3.521847]  secondary_start_kernel+0xdc/0x168
[    3.521848] ---[ end trace f68728a0d3053bb2 ]---
[    3.521855] GICv3: CPU96: using allocated LPI pending table 
@0x000000007a800000
[    3.521910] Xen: initializing cpu96
[    3.521940] CPU96: Booted secondary processor 0x0000000600 [0x481fd010]
[    3.550933] Detected VIPT I-cache on CPU97
[    3.551076] GICv3: CPU97: found redistributor 601 region 
48:0x00000000aa520000
[    3.557769] ------------[ cut here ]------------
[    3.557773] WARNING: CPU: 97 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.557773] Modules linked in:
[    3.557776] CPU: 97 PID: 0 Comm: swapper/97 Tainted: G W         
5.5.0-rc5 #132
[    3.557777] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.557778] pc : its_cpu_init+0x2f0/0x494
[    3.557780] lr : its_cpu_init+0x2ec/0x494
[    3.557780] sp : ffff800012623ee0
[    3.557781] x29: ffff800012623ee0 x28: 0000000000000000
[    3.557782] x27: 0000000000000000 x26: 0000000000000000
[    3.557783] x25: 0000000000000000 x24: ffff8000135e0000
[    3.557784] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.557785] x21: ffff8000117a9000 x20: fffffe0001ca0400
[    3.557786] x19: ffff8000117db000 x18: 0000000000000000
[    3.557787] x17: 0000000000000000 x16: 0000000000000000
[    3.557788] x15: 0000000000000000 x14: 0000000000000000
[    3.557789] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.557790] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.557791] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.557792] x7 : 0000000000000000 x6 : 0000000000000070
[    3.557793] x5 : 00000000a0a0a0a0 x4 : ffffa0260997d000
[    3.557794] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.557795] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.557796] Call trace:
[    3.557798]  its_cpu_init+0x2f0/0x494
[    3.557800]  gic_starting_cpu+0x18/0x24
[    3.557801]  cpuhp_invoke_callback+0x84/0x1e0
[    3.557803]  notify_cpu_starting+0x9c/0xb8
[    3.557805]  secondary_start_kernel+0xdc/0x168
[    3.557805] ---[ end trace f68728a0d3053bb3 ]---
[    3.557811] GICv3: CPU97: using allocated LPI pending table 
@0x000000007a810000
[    3.557835] Xen: initializing cpu97
[    3.557845] CPU97: Booted secondary processor 0x0000000601 [0x481fd010]
[    3.587004] Detected VIPT I-cache on CPU98
[    3.587146] GICv3: CPU98: found redistributor 602 region 
49:0x00000000aa540000
[    3.593839] ------------[ cut here ]------------
[    3.593843] WARNING: CPU: 98 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.593844] Modules linked in:
[    3.593846] CPU: 98 PID: 0 Comm: swapper/98 Tainted: G W         
5.5.0-rc5 #132
[    3.593847] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.593849] pc : its_cpu_init+0x2f0/0x494
[    3.593850] lr : its_cpu_init+0x2ec/0x494
[    3.593851] sp : ffff80001262bee0
[    3.593852] x29: ffff80001262bee0 x28: 0000000000000000
[    3.593853] x27: 0000000000000000 x26: 0000000000000000
[    3.593854] x25: 0000000000000000 x24: ffff800013640000
[    3.593855] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.593856] x21: ffff8000117a9000 x20: fffffe0001ca0800
[    3.593857] x19: ffff8000117db000 x18: 0000000000000000
[    3.593858] x17: 0000000000000000 x16: 0000000000000000
[    3.593859] x15: 0000000000000000 x14: 0000000000000000
[    3.593860] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.593861] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.593862] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.593863] x7 : 0000000000000000 x6 : 0000000000000070
[    3.593864] x5 : 00000000a0a0a0a0 x4 : ffffa02609993000
[    3.593865] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.593866] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.593868] Call trace:
[    3.593869]  its_cpu_init+0x2f0/0x494
[    3.593871]  gic_starting_cpu+0x18/0x24
[    3.593872]  cpuhp_invoke_callback+0x84/0x1e0
[    3.593873]  notify_cpu_starting+0x9c/0xb8
[    3.593875]  secondary_start_kernel+0xdc/0x168
[    3.593876] ---[ end trace f68728a0d3053bb4 ]---
[    3.593882] GICv3: CPU98: using allocated LPI pending table 
@0x000000007a820000
[    3.593906] Xen: initializing cpu98
[    3.593916] CPU98: Booted secondary processor 0x0000000602 [0x481fd010]
[    3.623071] Detected VIPT I-cache on CPU99
[    3.623215] GICv3: CPU99: found redistributor 603 region 
49:0x00000000aa560000
[    3.629908] ------------[ cut here ]------------
[    3.629911] WARNING: CPU: 99 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.629912] Modules linked in:
[    3.629914] CPU: 99 PID: 0 Comm: swapper/99 Tainted: G W         
5.5.0-rc5 #132
[    3.629915] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.629917] pc : its_cpu_init+0x2f0/0x494
[    3.629919] lr : its_cpu_init+0x2ec/0x494
[    3.629919] sp : ffff800012633ee0
[    3.629920] x29: ffff800012633ee0 x28: 0000000000000000
[    3.629921] x27: 0000000000000000 x26: 0000000000000000
[    3.629922] x25: 0000000000000000 x24: ffff800013660000
[    3.629923] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.629924] x21: ffff8000117a9000 x20: fffffe0001ca0c00
[    3.629925] x19: ffff8000117db000 x18: 0000000000000000
[    3.629926] x17: 0000000000000000 x16: 0000000000000000
[    3.629927] x15: 0000000000000000 x14: 0000000000000000
[    3.629928] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.629929] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.629931] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.629932] x7 : 0000000000000000 x6 : 0000000000000070
[    3.629933] x5 : 00000000a0a0a0a0 x4 : ffffa026099a9000
[    3.629934] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.629935] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.629936] Call trace:
[    3.629938]  its_cpu_init+0x2f0/0x494
[    3.629939]  gic_starting_cpu+0x18/0x24
[    3.629940]  cpuhp_invoke_callback+0x84/0x1e0
[    3.629942]  notify_cpu_starting+0x9c/0xb8
[    3.629944]  secondary_start_kernel+0xdc/0x168
[    3.629944] ---[ end trace f68728a0d3053bb5 ]---
[    3.629950] GICv3: CPU99: using allocated LPI pending table 
@0x000000007a830000
[    3.629974] Xen: initializing cpu99
[    3.629985] CPU99: Booted secondary processor 0x0000000603 [0x481fd010]
[    3.659146] Detected VIPT I-cache on CPU100
[    3.659298] GICv3: CPU100: found redistributor 604 region 
50:0x00000000aa580000
[    3.666087] ------------[ cut here ]------------
[    3.666092] WARNING: CPU: 100 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.666092] Modules linked in:
[    3.666095] CPU: 100 PID: 0 Comm: swapper/100 Tainted: G W         
5.5.0-rc5 #132
[    3.666097] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.666098] pc : its_cpu_init+0x2f0/0x494
[    3.666099] lr : its_cpu_init+0x2ec/0x494
[    3.666100] sp : ffff80001268bee0
[    3.666101] x29: ffff80001268bee0 x28: 0000000000000000
[    3.666102] x27: 0000000000000000 x26: 0000000000000000
[    3.666103] x25: 0000000000000000 x24: ffff8000136c0000
[    3.666104] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.666105] x21: ffff8000117a9000 x20: fffffe0001ca1000
[    3.666106] x19: ffff8000117db000 x18: 0000000000000000
[    3.666107] x17: 0000000000000000 x16: 0000000000000000
[    3.666108] x15: 0000000000000000 x14: 0000000000000000
[    3.666109] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.666110] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.666111] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.666112] x7 : 0000000000000000 x6 : 0000000000000070
[    3.666113] x5 : 00000000a0a0a0a0 x4 : ffffa026099bf000
[    3.666114] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.666115] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.666116] Call trace:
[    3.666118]  its_cpu_init+0x2f0/0x494
[    3.666119]  gic_starting_cpu+0x18/0x24
[    3.666121]  cpuhp_invoke_callback+0x84/0x1e0
[    3.666122]  notify_cpu_starting+0x9c/0xb8
[    3.666124]  secondary_start_kernel+0xdc/0x168
[    3.666125] ---[ end trace f68728a0d3053bb6 ]---
[    3.666130] GICv3: CPU100: using allocated LPI pending table 
@0x000000007a840000
[    3.666155] Xen: initializing cpu100
[    3.666168] CPU100: Booted secondary processor 0x0000000604 [0x481fd010]
[    3.695211] Detected VIPT I-cache on CPU101
[    3.695360] GICv3: CPU101: found redistributor 605 region 
50:0x00000000aa5a0000
[    3.702139] ------------[ cut here ]------------
[    3.702143] WARNING: CPU: 101 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.702143] Modules linked in:
[    3.702145] CPU: 101 PID: 0 Comm: swapper/101 Tainted: G W         
5.5.0-rc5 #132
[    3.702147] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.702148] pc : its_cpu_init+0x2f0/0x494
[    3.702150] lr : its_cpu_init+0x2ec/0x494
[    3.702150] sp : ffff800012693ee0
[    3.702151] x29: ffff800012693ee0 x28: 0000000000000000
[    3.702152] x27: 0000000000000000 x26: 0000000000000000
[    3.702153] x25: 0000000000000000 x24: ffff8000136e0000
[    3.702154] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.702155] x21: ffff8000117a9000 x20: fffffe0001ca1400
[    3.702156] x19: ffff8000117db000 x18: 0000000000000000
[    3.702157] x17: 0000000000000000 x16: 0000000000000000
[    3.702158] x15: 0000000000000000 x14: 0000000000000000
[    3.702159] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.702160] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.702161] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.702162] x7 : 0000000000000000 x6 : 0000000000000070
[    3.702163] x5 : 00000000a0a0a0a0 x4 : ffffa026099d5000
[    3.702164] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.702164] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.702166] Call trace:
[    3.702167]  its_cpu_init+0x2f0/0x494
[    3.702169]  gic_starting_cpu+0x18/0x24
[    3.702170]  cpuhp_invoke_callback+0x84/0x1e0
[    3.702171]  notify_cpu_starting+0x9c/0xb8
[    3.702172]  secondary_start_kernel+0xdc/0x168
[    3.702173] ---[ end trace f68728a0d3053bb7 ]---
[    3.702179] GICv3: CPU101: using allocated LPI pending table 
@0x000000007a850000
[    3.702202] Xen: initializing cpu101
[    3.702212] CPU101: Booted secondary processor 0x0000000605 [0x481fd010]
[    3.731282] Detected VIPT I-cache on CPU102
[    3.731429] GICv3: CPU102: found redistributor 606 region 
51:0x00000000aa5c0000
[    3.738209] ------------[ cut here ]------------
[    3.738212] WARNING: CPU: 102 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.738213] Modules linked in:
[    3.738215] CPU: 102 PID: 0 Comm: swapper/102 Tainted: G W         
5.5.0-rc5 #132
[    3.738216] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.738218] pc : its_cpu_init+0x2f0/0x494
[    3.738219] lr : its_cpu_init+0x2ec/0x494
[    3.738220] sp : ffff80001269bee0
[    3.738221] x29: ffff80001269bee0 x28: 0000000000000000
[    3.738222] x27: 0000000000000000 x26: 0000000000000000
[    3.738223] x25: 0000000000000000 x24: ffff800013740000
[    3.738224] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.738225] x21: ffff8000117a9000 x20: fffffe0001ca1800
[    3.738226] x19: ffff8000117db000 x18: 0000000000000000
[    3.738227] x17: 0000000000000000 x16: 0000000000000000
[    3.738227] x15: 0000000000000000 x14: 0000000000000000
[    3.738228] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.738229] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.738230] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.738231] x7 : 0000000000000000 x6 : 0000000000000070
[    3.738232] x5 : 00000000a0a0a0a0 x4 : ffffa026099eb000
[    3.738233] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.738234] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.738236] Call trace:
[    3.738237]  its_cpu_init+0x2f0/0x494
[    3.738238]  gic_starting_cpu+0x18/0x24
[    3.738240]  cpuhp_invoke_callback+0x84/0x1e0
[    3.738241]  notify_cpu_starting+0x9c/0xb8
[    3.738242]  secondary_start_kernel+0xdc/0x168
[    3.738243] ---[ end trace f68728a0d3053bb8 ]---
[    3.738249] GICv3: CPU102: using allocated LPI pending table 
@0x000000007a860000
[    3.738273] Xen: initializing cpu102
[    3.738283] CPU102: Booted secondary processor 0x0000000606 [0x481fd010]
[    3.767352] Detected VIPT I-cache on CPU103
[    3.767500] GICv3: CPU103: found redistributor 607 region 
51:0x00000000aa5e0000
[    3.774279] ------------[ cut here ]------------
[    3.774283] WARNING: CPU: 103 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.774283] Modules linked in:
[    3.774286] CPU: 103 PID: 0 Comm: swapper/103 Tainted: G W         
5.5.0-rc5 #132
[    3.774287] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.774288] pc : its_cpu_init+0x2f0/0x494
[    3.774290] lr : its_cpu_init+0x2ec/0x494
[    3.774290] sp : ffff8000126a3ee0
[    3.774291] x29: ffff8000126a3ee0 x28: 0000000000000000
[    3.774292] x27: 0000000000000000 x26: 0000000000000000
[    3.774293] x25: 0000000000000000 x24: ffff800013760000
[    3.774294] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.774295] x21: ffff8000117a9000 x20: fffffe0001ca1c00
[    3.774296] x19: ffff8000117db000 x18: 0000000000000000
[    3.774297] x17: 0000000000000000 x16: 0000000000000000
[    3.774298] x15: 0000000000000000 x14: 0000000000000000
[    3.774299] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.774300] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.774301] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.774302] x7 : 0000000000000000 x6 : 0000000000000070
[    3.774303] x5 : 00000000a0a0a0a0 x4 : ffffa02609a01000
[    3.774304] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.774305] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.774306] Call trace:
[    3.774307]  its_cpu_init+0x2f0/0x494
[    3.774309]  gic_starting_cpu+0x18/0x24
[    3.774310]  cpuhp_invoke_callback+0x84/0x1e0
[    3.774311]  notify_cpu_starting+0x9c/0xb8
[    3.774313]  secondary_start_kernel+0xdc/0x168
[    3.774313] ---[ end trace f68728a0d3053bb9 ]---
[    3.774318] GICv3: CPU103: using allocated LPI pending table 
@0x000000007a870000
[    3.774343] Xen: initializing cpu103
[    3.774353] CPU103: Booted secondary processor 0x0000000607 [0x481fd010]
[    3.803433] Detected VIPT I-cache on CPU104
[    3.803590] GICv3: CPU104: found redistributor 608 region 
52:0x00000000aa600000
[    3.810377] ------------[ cut here ]------------
[    3.810381] WARNING: CPU: 104 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.810382] Modules linked in:
[    3.810385] CPU: 104 PID: 0 Comm: swapper/104 Tainted: G W         
5.5.0-rc5 #132
[    3.810386] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.810388] pc : its_cpu_init+0x2f0/0x494
[    3.810389] lr : its_cpu_init+0x2ec/0x494
[    3.810390] sp : ffff8000126abee0
[    3.810390] x29: ffff8000126abee0 x28: 0000000000000000
[    3.810392] x27: 0000000000000000 x26: 0000000000000000
[    3.810393] x25: 0000000000000000 x24: ffff8000137c0000
[    3.810394] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.810395] x21: ffff8000117a9000 x20: fffffe0001ca2000
[    3.810396] x19: ffff8000117db000 x18: 0000000000000000
[    3.810397] x17: 0000000000000000 x16: 0000000000000000
[    3.810398] x15: 0000000000000000 x14: 0000000000000000
[    3.810399] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.810400] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.810401] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.810402] x7 : 0000000000000000 x6 : 0000000000000070
[    3.810403] x5 : 00000000a0a0a0a0 x4 : ffffa02609a17000
[    3.810404] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.810405] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.810406] Call trace:
[    3.810408]  its_cpu_init+0x2f0/0x494
[    3.810409]  gic_starting_cpu+0x18/0x24
[    3.810411]  cpuhp_invoke_callback+0x84/0x1e0
[    3.810412]  notify_cpu_starting+0x9c/0xb8
[    3.810413]  secondary_start_kernel+0xdc/0x168
[    3.810414] ---[ end trace f68728a0d3053bba ]---
[    3.810420] GICv3: CPU104: using allocated LPI pending table 
@0x000000007a880000
[    3.810449] Xen: initializing cpu104
[    3.810463] CPU104: Booted secondary processor 0x0000000608 [0x481fd010]
[    3.839497] Detected VIPT I-cache on CPU105
[    3.839649] GICv3: CPU105: found redistributor 609 region 
52:0x00000000aa620000
[    3.846429] ------------[ cut here ]------------
[    3.846433] WARNING: CPU: 105 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.846433] Modules linked in:
[    3.846436] CPU: 105 PID: 0 Comm: swapper/105 Tainted: G W         
5.5.0-rc5 #132
[    3.846437] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.846439] pc : its_cpu_init+0x2f0/0x494
[    3.846440] lr : its_cpu_init+0x2ec/0x494
[    3.846441] sp : ffff8000126b3ee0
[    3.846441] x29: ffff8000126b3ee0 x28: 0000000000000000
[    3.846442] x27: 0000000000000000 x26: 0000000000000000
[    3.846443] x25: 0000000000000000 x24: ffff8000137e0000
[    3.846444] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.846445] x21: ffff8000117a9000 x20: fffffe0001ca2400
[    3.846446] x19: ffff8000117db000 x18: 0000000000000000
[    3.846447] x17: 0000000000000000 x16: 0000000000000000
[    3.846448] x15: 0000000000000000 x14: 0000000000000000
[    3.846449] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.846450] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.846451] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.846452] x7 : 0000000000000000 x6 : 0000000000000070
[    3.846453] x5 : 00000000a0a0a0a0 x4 : ffffa02609a2d000
[    3.846454] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.846455] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.846456] Call trace:
[    3.846458]  its_cpu_init+0x2f0/0x494
[    3.846459]  gic_starting_cpu+0x18/0x24
[    3.846460]  cpuhp_invoke_callback+0x84/0x1e0
[    3.846461]  notify_cpu_starting+0x9c/0xb8
[    3.846463]  secondary_start_kernel+0xdc/0x168
[    3.846464] ---[ end trace f68728a0d3053bbb ]---
[    3.846470] GICv3: CPU105: using allocated LPI pending table 
@0x000000007a890000
[    3.846493] Xen: initializing cpu105
[    3.846503] CPU105: Booted secondary processor 0x0000000609 [0x481fd010]
[    3.875573] Detected VIPT I-cache on CPU106
[    3.875724] GICv3: CPU106: found redistributor 60a region 
53:0x00000000aa640000
[    3.882504] ------------[ cut here ]------------
[    3.882508] WARNING: CPU: 106 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.882508] Modules linked in:
[    3.882511] CPU: 106 PID: 0 Comm: swapper/106 Tainted: G W         
5.5.0-rc5 #132
[    3.882513] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.882514] pc : its_cpu_init+0x2f0/0x494
[    3.882516] lr : its_cpu_init+0x2ec/0x494
[    3.882516] sp : ffff8000126bbee0
[    3.882517] x29: ffff8000126bbee0 x28: 0000000000000000
[    3.882518] x27: 0000000000000000 x26: 0000000000000000
[    3.882519] x25: 0000000000000000 x24: ffff800013840000
[    3.882520] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.882521] x21: ffff8000117a9000 x20: fffffe0001ca2800
[    3.882522] x19: ffff8000117db000 x18: 0000000000000000
[    3.882523] x17: 0000000000000000 x16: 0000000000000000
[    3.882524] x15: 0000000000000000 x14: 0000000000000000
[    3.882525] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.882526] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.882527] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.882528] x7 : 0000000000000000 x6 : 0000000000000070
[    3.882529] x5 : 00000000a0a0a0a0 x4 : ffffa02609a43000
[    3.882530] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.882531] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.882532] Call trace:
[    3.882534]  its_cpu_init+0x2f0/0x494
[    3.882535]  gic_starting_cpu+0x18/0x24
[    3.882536]  cpuhp_invoke_callback+0x84/0x1e0
[    3.882538]  notify_cpu_starting+0x9c/0xb8
[    3.882539]  secondary_start_kernel+0xdc/0x168
[    3.882540] ---[ end trace f68728a0d3053bbc ]---
[    3.882545] GICv3: CPU106: using allocated LPI pending table 
@0x000000007a8a0000
[    3.882567] Xen: initializing cpu106
[    3.882577] CPU106: Booted secondary processor 0x000000060a [0x481fd010]
[    3.911638] Detected VIPT I-cache on CPU107
[    3.911792] GICv3: CPU107: found redistributor 60b region 
53:0x00000000aa660000
[    3.918571] ------------[ cut here ]------------
[    3.918575] WARNING: CPU: 107 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.918575] Modules linked in:
[    3.918578] CPU: 107 PID: 0 Comm: swapper/107 Tainted: G W         
5.5.0-rc5 #132
[    3.918579] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.918581] pc : its_cpu_init+0x2f0/0x494
[    3.918582] lr : its_cpu_init+0x2ec/0x494
[    3.918583] sp : ffff80001270bee0
[    3.918584] x29: ffff80001270bee0 x28: 0000000000000000
[    3.918585] x27: 0000000000000000 x26: 0000000000000000
[    3.918586] x25: 0000000000000000 x24: ffff800013860000
[    3.918587] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.918589] x21: ffff8000117a9000 x20: fffffe0001ca2c00
[    3.918590] x19: ffff8000117db000 x18: 0000000000000000
[    3.918591] x17: 0000000000000000 x16: 0000000000000000
[    3.918591] x15: 0000000000000000 x14: 0000000000000000
[    3.918592] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.918594] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.918595] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.918596] x7 : 0000000000000000 x6 : 0000000000000070
[    3.918597] x5 : 00000000a0a0a0a0 x4 : ffffa02609a59000
[    3.918598] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.918599] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.918600] Call trace:
[    3.918602]  its_cpu_init+0x2f0/0x494
[    3.918603]  gic_starting_cpu+0x18/0x24
[    3.918604]  cpuhp_invoke_callback+0x84/0x1e0
[    3.918606]  notify_cpu_starting+0x9c/0xb8
[    3.918607]  secondary_start_kernel+0xdc/0x168
[    3.918608] ---[ end trace f68728a0d3053bbd ]---
[    3.918614] GICv3: CPU107: using allocated LPI pending table 
@0x000000007a8b0000
[    3.918636] Xen: initializing cpu107
[    3.918646] CPU107: Booted secondary processor 0x000000060b [0x481fd010]
[    3.947714] Detected VIPT I-cache on CPU108
[    3.947874] GICv3: CPU108: found redistributor 60c region 
54:0x00000000aa680000
[    3.954662] ------------[ cut here ]------------
[    3.954667] WARNING: CPU: 108 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.954667] Modules linked in:
[    3.954670] CPU: 108 PID: 0 Comm: swapper/108 Tainted: G W         
5.5.0-rc5 #132
[    3.954671] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.954673] pc : its_cpu_init+0x2f0/0x494
[    3.954675] lr : its_cpu_init+0x2ec/0x494
[    3.954675] sp : ffff800012713ee0
[    3.954676] x29: ffff800012713ee0 x28: 0000000000000000
[    3.954677] x27: 0000000000000000 x26: 0000000000000000
[    3.954679] x25: 0000000000000000 x24: ffff8000138c0000
[    3.954680] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.954681] x21: ffff8000117a9000 x20: fffffe0001ca3000
[    3.954682] x19: ffff8000117db000 x18: 0000000000000000
[    3.954683] x17: 0000000000000000 x16: 0000000000000000
[    3.954684] x15: 0000000000000000 x14: 0000000000000000
[    3.954685] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.954686] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.954687] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.954688] x7 : 0000000000000000 x6 : 0000000000000070
[    3.954689] x5 : 00000000a0a0a0a0 x4 : ffffa02609a6f000
[    3.954690] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.954691] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.954692] Call trace:
[    3.954694]  its_cpu_init+0x2f0/0x494
[    3.954696]  gic_starting_cpu+0x18/0x24
[    3.954697]  cpuhp_invoke_callback+0x84/0x1e0
[    3.954699]  notify_cpu_starting+0x9c/0xb8
[    3.954700]  secondary_start_kernel+0xdc/0x168
[    3.954702] ---[ end trace f68728a0d3053bbe ]---
[    3.954708] GICv3: CPU108: using allocated LPI pending table 
@0x000000007a8c0000
[    3.954734] Xen: initializing cpu108
[    3.954751] CPU108: Booted secondary processor 0x000000060c [0x481fd010]
[    3.983779] Detected VIPT I-cache on CPU109
[    3.983935] GICv3: CPU109: found redistributor 60d region 
54:0x00000000aa6a0000
[    3.990714] ------------[ cut here ]------------
[    3.990718] WARNING: CPU: 109 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    3.990718] Modules linked in:
[    3.990721] CPU: 109 PID: 0 Comm: swapper/109 Tainted: G W         
5.5.0-rc5 #132
[    3.990722] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    3.990724] pc : its_cpu_init+0x2f0/0x494
[    3.990725] lr : its_cpu_init+0x2ec/0x494
[    3.990725] sp : ffff80001271bee0
[    3.990726] x29: ffff80001271bee0 x28: 0000000000000000
[    3.990727] x27: 0000000000000000 x26: 0000000000000000
[    3.990728] x25: 0000000000000000 x24: ffff8000138e0000
[    3.990729] x23: ffff8000111f4000 x22: ffff8000119cd000
[    3.990730] x21: ffff8000117a9000 x20: fffffe0001ca3400
[    3.990731] x19: ffff8000117db000 x18: 0000000000000000
[    3.990732] x17: 0000000000000000 x16: 0000000000000000
[    3.990734] x15: 0000000000000000 x14: 0000000000000000
[    3.990735] x13: 0000000000000000 x12: f4e33ba569c0a400
[    3.990735] x11: ffffffffffffffff x10: ffff8000119916a0
[    3.990736] x9 : 0000000000000000 x8 : ffff8000119916a0
[    3.990737] x7 : 0000000000000000 x6 : 0000000000000070
[    3.990738] x5 : 00000000a0a0a0a0 x4 : ffffa02609a85000
[    3.990739] x3 : 000000000000003d x2 : ffffffffffffffff
[    3.990740] x1 : 0000000000010000 x0 : 00000000ffffffed
[    3.990741] Call trace:
[    3.990743]  its_cpu_init+0x2f0/0x494
[    3.990744]  gic_starting_cpu+0x18/0x24
[    3.990746]  cpuhp_invoke_callback+0x84/0x1e0
[    3.990747]  notify_cpu_starting+0x9c/0xb8
[    3.990748]  secondary_start_kernel+0xdc/0x168
[    3.990749] ---[ end trace f68728a0d3053bbf ]---
[    3.990754] GICv3: CPU109: using allocated LPI pending table 
@0x000000007a8d0000
[    3.990776] Xen: initializing cpu109
[    3.990786] CPU109: Booted secondary processor 0x000000060d [0x481fd010]
[    4.019976] Detected VIPT I-cache on CPU110
[    4.020134] GICv3: CPU110: found redistributor 60e region 
55:0x00000000aa6c0000
[    4.026913] ------------[ cut here ]------------
[    4.026917] WARNING: CPU: 110 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.026917] Modules linked in:
[    4.026919] CPU: 110 PID: 0 Comm: swapper/110 Tainted: G W         
5.5.0-rc5 #132
[    4.026921] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.026922] pc : its_cpu_init+0x2f0/0x494
[    4.026924] lr : its_cpu_init+0x2ec/0x494
[    4.026924] sp : ffff800012723ee0
[    4.026925] x29: ffff800012723ee0 x28: 0000000000000000
[    4.026926] x27: 0000000000000000 x26: 0000000000000000
[    4.026927] x25: 0000000000000000 x24: ffff800013940000
[    4.026928] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.026929] x21: ffff8000117a9000 x20: fffffe0001ca3800
[    4.026930] x19: ffff8000117db000 x18: 0000000000000000
[    4.026931] x17: 0000000000000000 x16: 0000000000000000
[    4.026932] x15: 0000000000000000 x14: 0000000000000000
[    4.026933] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.026934] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.026935] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.026936] x7 : 0000000000000000 x6 : 0000000000000070
[    4.026937] x5 : 00000000a0a0a0a0 x4 : ffffa02609a9b000
[    4.026938] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.026939] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.026940] Call trace:
[    4.026941]  its_cpu_init+0x2f0/0x494
[    4.026943]  gic_starting_cpu+0x18/0x24
[    4.026944]  cpuhp_invoke_callback+0x84/0x1e0
[    4.026945]  notify_cpu_starting+0x9c/0xb8
[    4.026946]  secondary_start_kernel+0xdc/0x168
[    4.026947] ---[ end trace f68728a0d3053bc0 ]---
[    4.026952] GICv3: CPU110: using allocated LPI pending table 
@0x000000007a8e0000
[    4.026974] Xen: initializing cpu110
[    4.026984] CPU110: Booted secondary processor 0x000000060e [0x481fd010]
[    4.056049] Detected VIPT I-cache on CPU111
[    4.056206] GICv3: CPU111: found redistributor 60f region 
55:0x00000000aa6e0000
[    4.062986] ------------[ cut here ]------------
[    4.062989] WARNING: CPU: 111 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.062990] Modules linked in:
[    4.062992] CPU: 111 PID: 0 Comm: swapper/111 Tainted: G W         
5.5.0-rc5 #132
[    4.062993] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.062995] pc : its_cpu_init+0x2f0/0x494
[    4.062996] lr : its_cpu_init+0x2ec/0x494
[    4.062997] sp : ffff80001272bee0
[    4.062998] x29: ffff80001272bee0 x28: 0000000000000000
[    4.062999] x27: 0000000000000000 x26: 0000000000000000
[    4.063000] x25: 0000000000000000 x24: ffff800013960000
[    4.063001] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.063002] x21: ffff8000117a9000 x20: fffffe0001ca3c00
[    4.063003] x19: ffff8000117db000 x18: 0000000000000000
[    4.063004] x17: 0000000000000000 x16: 0000000000000000
[    4.063005] x15: 0000000000000000 x14: 0000000000000000
[    4.063006] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.063007] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.063008] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.063008] x7 : 0000000000000000 x6 : 0000000000000070
[    4.063009] x5 : 00000000a0a0a0a0 x4 : ffffa02609ab1000
[    4.063010] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.063011] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.063012] Call trace:
[    4.063014]  its_cpu_init+0x2f0/0x494
[    4.063015]  gic_starting_cpu+0x18/0x24
[    4.063017]  cpuhp_invoke_callback+0x84/0x1e0
[    4.063018]  notify_cpu_starting+0x9c/0xb8
[    4.063019]  secondary_start_kernel+0xdc/0x168
[    4.063020] ---[ end trace f68728a0d3053bc1 ]---
[    4.063025] GICv3: CPU111: using allocated LPI pending table 
@0x000000007a8f0000
[    4.063046] Xen: initializing cpu111
[    4.063056] CPU111: Booted secondary processor 0x000000060f [0x481fd010]
[    4.092129] Detected VIPT I-cache on CPU112
[    4.092296] GICv3: CPU112: found redistributor 700 region 
56:0x00000000aa700000
[    4.099083] ------------[ cut here ]------------
[    4.099087] WARNING: CPU: 112 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.099088] Modules linked in:
[    4.099091] CPU: 112 PID: 0 Comm: swapper/112 Tainted: G W         
5.5.0-rc5 #132
[    4.099092] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.099094] pc : its_cpu_init+0x2f0/0x494
[    4.099095] lr : its_cpu_init+0x2ec/0x494
[    4.099096] sp : ffff800012733ee0
[    4.099096] x29: ffff800012733ee0 x28: 0000000000000000
[    4.099097] x27: 0000000000000000 x26: 0000000000000000
[    4.099098] x25: 0000000000000000 x24: ffff8000139c0000
[    4.099099] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.099100] x21: ffff8000117a9000 x20: fffffe0001ca4000
[    4.099101] x19: ffff8000117db000 x18: 0000000000000000
[    4.099102] x17: 0000000000000000 x16: 0000000000000000
[    4.099103] x15: 0000000000000000 x14: 0000000000000000
[    4.099104] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.099105] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.099106] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.099107] x7 : 0000000000000000 x6 : 0000000000000070
[    4.099108] x5 : 00000000a0a0a0a0 x4 : ffffa02609ac7000
[    4.099109] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.099110] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.099111] Call trace:
[    4.099113]  its_cpu_init+0x2f0/0x494
[    4.099114]  gic_starting_cpu+0x18/0x24
[    4.099116]  cpuhp_invoke_callback+0x84/0x1e0
[    4.099117]  notify_cpu_starting+0x9c/0xb8
[    4.099119]  secondary_start_kernel+0xdc/0x168
[    4.099119] ---[ end trace f68728a0d3053bc2 ]---
[    4.099125] GICv3: CPU112: using allocated LPI pending table 
@0x000000007a900000
[    4.099150] Xen: initializing cpu112
[    4.099163] CPU112: Booted secondary processor 0x0000000700 [0x481fd010]
[    4.128196] Detected VIPT I-cache on CPU113
[    4.128359] GICv3: CPU113: found redistributor 701 region 
56:0x00000000aa720000
[    4.135139] ------------[ cut here ]------------
[    4.135143] WARNING: CPU: 113 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.135144] Modules linked in:
[    4.135146] CPU: 113 PID: 0 Comm: swapper/113 Tainted: G W         
5.5.0-rc5 #132
[    4.135147] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.135149] pc : its_cpu_init+0x2f0/0x494
[    4.135150] lr : its_cpu_init+0x2ec/0x494
[    4.135151] sp : ffff80001278bee0
[    4.135152] x29: ffff80001278bee0 x28: 0000000000000000
[    4.135153] x27: 0000000000000000 x26: 0000000000000000
[    4.135154] x25: 0000000000000000 x24: ffff8000139e0000
[    4.135155] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.135156] x21: ffff8000117a9000 x20: fffffe0001ca4400
[    4.135157] x19: ffff8000117db000 x18: 0000000000000000
[    4.135158] x17: 0000000000000000 x16: 0000000000000000
[    4.135159] x15: 0000000000000000 x14: 0000000000000000
[    4.135160] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.135161] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.135162] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.135163] x7 : 0000000000000000 x6 : 0000000000000070
[    4.135164] x5 : 00000000a0a0a0a0 x4 : ffffa02609add000
[    4.135165] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.135166] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.135167] Call trace:
[    4.135168]  its_cpu_init+0x2f0/0x494
[    4.135170]  gic_starting_cpu+0x18/0x24
[    4.135171]  cpuhp_invoke_callback+0x84/0x1e0
[    4.135173]  notify_cpu_starting+0x9c/0xb8
[    4.135174]  secondary_start_kernel+0xdc/0x168
[    4.135175] ---[ end trace f68728a0d3053bc3 ]---
[    4.135180] GICv3: CPU113: using allocated LPI pending table 
@0x000000007a910000
[    4.135202] Xen: initializing cpu113
[    4.135212] CPU113: Booted secondary processor 0x0000000701 [0x481fd010]
[    4.164269] Detected VIPT I-cache on CPU114
[    4.164431] GICv3: CPU114: found redistributor 702 region 
57:0x00000000aa740000
[    4.171211] ------------[ cut here ]------------
[    4.171215] WARNING: CPU: 114 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.171215] Modules linked in:
[    4.171218] CPU: 114 PID: 0 Comm: swapper/114 Tainted: G W         
5.5.0-rc5 #132
[    4.171219] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.171221] pc : its_cpu_init+0x2f0/0x494
[    4.171222] lr : its_cpu_init+0x2ec/0x494
[    4.171223] sp : ffff800012793ee0
[    4.171223] x29: ffff800012793ee0 x28: 0000000000000000
[    4.171225] x27: 0000000000000000 x26: 0000000000000000
[    4.171226] x25: 0000000000000000 x24: ffff800013a40000
[    4.171227] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.171228] x21: ffff8000117a9000 x20: fffffe0001ca4800
[    4.171229] x19: ffff8000117db000 x18: 0000000000000000
[    4.171230] x17: 0000000000000000 x16: 0000000000000000
[    4.171231] x15: 0000000000000000 x14: 0000000000000000
[    4.171232] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.171232] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.171233] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.171234] x7 : 0000000000000000 x6 : 0000000000000070
[    4.171235] x5 : 00000000a0a0a0a0 x4 : ffffa02609af3000
[    4.171236] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.171237] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.171238] Call trace:
[    4.171240]  its_cpu_init+0x2f0/0x494
[    4.171241]  gic_starting_cpu+0x18/0x24
[    4.171243]  cpuhp_invoke_callback+0x84/0x1e0
[    4.171244]  notify_cpu_starting+0x9c/0xb8
[    4.171245]  secondary_start_kernel+0xdc/0x168
[    4.171246] ---[ end trace f68728a0d3053bc4 ]---
[    4.171251] GICv3: CPU114: using allocated LPI pending table 
@0x000000007a920000
[    4.171273] Xen: initializing cpu114
[    4.171283] CPU114: Booted secondary processor 0x0000000702 [0x481fd010]
[    4.200344] Detected VIPT I-cache on CPU115
[    4.200508] GICv3: CPU115: found redistributor 703 region 
57:0x00000000aa760000
[    4.207288] ------------[ cut here ]------------
[    4.207292] WARNING: CPU: 115 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.207292] Modules linked in:
[    4.207295] CPU: 115 PID: 0 Comm: swapper/115 Tainted: G W         
5.5.0-rc5 #132
[    4.207296] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.207298] pc : its_cpu_init+0x2f0/0x494
[    4.207299] lr : its_cpu_init+0x2ec/0x494
[    4.207300] sp : ffff80001279bee0
[    4.207300] x29: ffff80001279bee0 x28: 0000000000000000
[    4.207302] x27: 0000000000000000 x26: 0000000000000000
[    4.207303] x25: 0000000000000000 x24: ffff800013a60000
[    4.207304] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.207305] x21: ffff8000117a9000 x20: fffffe0001ca4c00
[    4.207306] x19: ffff8000117db000 x18: 0000000000000000
[    4.207307] x17: 0000000000000000 x16: 0000000000000000
[    4.207308] x15: 0000000000000000 x14: 0000000000000000
[    4.207309] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.207310] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.207311] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.207311] x7 : 0000000000000000 x6 : 0000000000000070
[    4.207312] x5 : 00000000a0a0a0a0 x4 : ffffa02609b09000
[    4.207313] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.207314] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.207315] Call trace:
[    4.207317]  its_cpu_init+0x2f0/0x494
[    4.207318]  gic_starting_cpu+0x18/0x24
[    4.207320]  cpuhp_invoke_callback+0x84/0x1e0
[    4.207321]  notify_cpu_starting+0x9c/0xb8
[    4.207323]  secondary_start_kernel+0xdc/0x168
[    4.207323] ---[ end trace f68728a0d3053bc5 ]---
[    4.207328] GICv3: CPU115: using allocated LPI pending table 
@0x000000007a930000
[    4.207350] Xen: initializing cpu115
[    4.207360] CPU115: Booted secondary processor 0x0000000703 [0x481fd010]
[    4.236422] Detected VIPT I-cache on CPU116
[    4.236593] GICv3: CPU116: found redistributor 704 region 
58:0x00000000aa780000
[    4.243382] ------------[ cut here ]------------
[    4.243387] WARNING: CPU: 116 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.243387] Modules linked in:
[    4.243390] CPU: 116 PID: 0 Comm: swapper/116 Tainted: G W         
5.5.0-rc5 #132
[    4.243391] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.243393] pc : its_cpu_init+0x2f0/0x494
[    4.243394] lr : its_cpu_init+0x2ec/0x494
[    4.243395] sp : ffff8000127a3ee0
[    4.243396] x29: ffff8000127a3ee0 x28: 0000000000000000
[    4.243397] x27: 0000000000000000 x26: 0000000000000000
[    4.243398] x25: 0000000000000000 x24: ffff800013ac0000
[    4.243399] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.243400] x21: ffff8000117a9000 x20: fffffe0001ca5000
[    4.243401] x19: ffff8000117db000 x18: 0000000000000000
[    4.243402] x17: 0000000000000000 x16: 0000000000000000
[    4.243403] x15: 0000000000000000 x14: 0000000000000000
[    4.243404] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.243405] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.243406] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.243407] x7 : 0000000000000000 x6 : 0000000000000070
[    4.243408] x5 : 00000000a0a0a0a0 x4 : ffffa02609b1f000
[    4.243409] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.243410] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.243411] Call trace:
[    4.243413]  its_cpu_init+0x2f0/0x494
[    4.243414]  gic_starting_cpu+0x18/0x24
[    4.243415]  cpuhp_invoke_callback+0x84/0x1e0
[    4.243416]  notify_cpu_starting+0x9c/0xb8
[    4.243418]  secondary_start_kernel+0xdc/0x168
[    4.243419] ---[ end trace f68728a0d3053bc6 ]---
[    4.243424] GICv3: CPU116: using allocated LPI pending table 
@0x000000007a940000
[    4.243449] Xen: initializing cpu116
[    4.243462] CPU116: Booted secondary processor 0x0000000704 [0x481fd010]
[    4.272490] Detected VIPT I-cache on CPU117
[    4.272656] GICv3: CPU117: found redistributor 705 region 
58:0x00000000aa7a0000
[    4.279436] ------------[ cut here ]------------
[    4.279441] WARNING: CPU: 117 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.279441] Modules linked in:
[    4.279444] CPU: 117 PID: 0 Comm: swapper/117 Tainted: G W         
5.5.0-rc5 #132
[    4.279445] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.279447] pc : its_cpu_init+0x2f0/0x494
[    4.279448] lr : its_cpu_init+0x2ec/0x494
[    4.279449] sp : ffff8000127abee0
[    4.279449] x29: ffff8000127abee0 x28: 0000000000000000
[    4.279451] x27: 0000000000000000 x26: 0000000000000000
[    4.279452] x25: 0000000000000000 x24: ffff800013ae0000
[    4.279453] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.279454] x21: ffff8000117a9000 x20: fffffe0001ca5400
[    4.279455] x19: ffff8000117db000 x18: 0000000000000000
[    4.279456] x17: 0000000000000000 x16: 0000000000000000
[    4.279457] x15: 0000000000000000 x14: 0000000000000000
[    4.279458] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.279459] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.279460] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.279461] x7 : 0000000000000000 x6 : 0000000000000070
[    4.279462] x5 : 00000000a0a0a0a0 x4 : ffffa02609b35000
[    4.279463] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.279464] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.279465] Call trace:
[    4.279466]  its_cpu_init+0x2f0/0x494
[    4.279467]  gic_starting_cpu+0x18/0x24
[    4.279469]  cpuhp_invoke_callback+0x84/0x1e0
[    4.279470]  notify_cpu_starting+0x9c/0xb8
[    4.279472]  secondary_start_kernel+0xdc/0x168
[    4.279473] ---[ end trace f68728a0d3053bc7 ]---
[    4.279478] GICv3: CPU117: using allocated LPI pending table 
@0x000000007a950000
[    4.279499] Xen: initializing cpu117
[    4.279510] CPU117: Booted secondary processor 0x0000000705 [0x481fd010]
[    4.308562] Detected VIPT I-cache on CPU118
[    4.308728] GICv3: CPU118: found redistributor 706 region 
59:0x00000000aa7c0000
[    4.315508] ------------[ cut here ]------------
[    4.315512] WARNING: CPU: 118 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.315512] Modules linked in:
[    4.315515] CPU: 118 PID: 0 Comm: swapper/118 Tainted: G W         
5.5.0-rc5 #132
[    4.315516] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.315518] pc : its_cpu_init+0x2f0/0x494
[    4.315519] lr : its_cpu_init+0x2ec/0x494
[    4.315520] sp : ffff8000127b3ee0
[    4.315521] x29: ffff8000127b3ee0 x28: 0000000000000000
[    4.315522] x27: 0000000000000000 x26: 0000000000000000
[    4.315523] x25: 0000000000000000 x24: ffff800013b40000
[    4.315524] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.315525] x21: ffff8000117a9000 x20: fffffe0001ca5800
[    4.315526] x19: ffff8000117db000 x18: 0000000000000000
[    4.315527] x17: 0000000000000000 x16: 0000000000000000
[    4.315528] x15: 0000000000000000 x14: 0000000000000000
[    4.315529] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.315530] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.315531] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.315531] x7 : 0000000000000000 x6 : 0000000000000070
[    4.315532] x5 : 00000000a0a0a0a0 x4 : ffffa02609b4b000
[    4.315533] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.315534] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.315535] Call trace:
[    4.315537]  its_cpu_init+0x2f0/0x494
[    4.315538]  gic_starting_cpu+0x18/0x24
[    4.315540]  cpuhp_invoke_callback+0x84/0x1e0
[    4.315541]  notify_cpu_starting+0x9c/0xb8
[    4.315542]  secondary_strt_kernel+0xdc/0x168
[    4.315543] ---[ end trace f68728a0d3053bc8 ]---
[    4.315548] GICv3: CPU118: using allocated LPI pending table 
@0x000000007a960000
[    4.315570] Xen: initializing cpu118
[    4.315580] CPU118: Booted secondary processor 0x0000000706 [0x481fd010]
[    4.344636] Detected VIPT I-cache on CPU119
[    4.344804] GICv3: CPU119: found redistributor 707 region 
59:0x00000000aa7e0000
[    4.351583] ------------[ cut here ]------------
[    4.351587] WARNING: CPU: 119 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.351588] Modules linked in:
[    4.351590] CPU: 119 PID: 0 Comm: swapper/119 Tainted: G W         
5.5.0-rc5 #132
[    4.351591] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.351593] pc : its_cpu_init+0x2f0/0x494
[    4.351594] lr : its_cpu_init+0x2ec/0x494
[    4.351595] sp : ffff8000127bbee0
[    4.351596] x29: ffff8000127bbee0 x28: 0000000000000000
[    4.351597] x27: 0000000000000000 x26: 0000000000000000
[    4.351598] x25: 0000000000000000 x24: ffff800013b60000
[    4.351599] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.351600] x21: ffff8000117a9000 x20: fffffe0001ca5c00
[    4.351601] x19: ffff8000117db000 x18: 0000000000000000
[    4.351602] x17: 0000000000000000 x16: 0000000000000000
[    4.351603] x15: 0000000000000000 x14: 0000000000000000
[    4.351604] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.351605] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.351606] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.351607] x7 : 0000000000000000 x6 : 0000000000000070
[    4.351608] x5 : 00000000a0a0a0a0 x4 : ffffa02609b61000
[    4.351609] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.351610] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.351611] Call trace:
[    4.351612]  its_cpu_init+0x2f0/0x494
[    4.351614]  gic_starting_cpu+0x18/0x24
[    4.351615]  cpuhp_invoke_callback+0x84/0x1e0
[    4.351616]  notify_cpu_starting+0x9c/0xb8
[    4.351618]  secondary_start_kernel+0xdc/0x168
[    4.351619] ---[ end trace f68728a0d3053bc9 ]---
[    4.351624] GICv3: CPU119: using allocated LPI pending table 
@0x000000007a970000
[    4.351646] Xen: initializing cpu119
[    4.351656] CPU119: Booted secondary processor 0x0000000707 [0x481fd010]
[    4.380714] Detected VIPT I-cache on CPU120
[    4.380890] GICv3: CPU120: found redistributor 708 region 
60:0x00000000aa800000
[    4.387680] ------------[ cut here ]------------
[    4.387685] WARNING: CPU: 120 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.387686] Modules linked in:
[    4.387688] CPU: 120 PID: 0 Comm: swapper/120 Tainted: G W         
5.5.0-rc5 #132
[    4.387689] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.387691] pc : its_cpu_init+0x2f0/0x494
[    4.387692] lr : its_cpu_init+0x2ec/0x494
[    4.387693] sp : ffff80001280bee0
[    4.387694] x29: ffff80001280bee0 x28: 0000000000000000
[    4.387695] x27: 0000000000000000 x26: 0000000000000000
[    4.387696] x25: 0000000000000000 x24: ffff800013bc0000
[    4.387697] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.387698] x21: ffff8000117a9000 x20: fffffe0001ca6000
[    4.387699] x19: ffff8000117db000 x18: 0000000000000000
[    4.387700] x17: 0000000000000000 x16: 0000000000000000
[    4.387701] x15: 0000000000000000 x14: 0000000000000000
[    4.387702] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.387703] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.387704] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.387705] x7 : 0000000000000000 x6 : 0000000000000070
[    4.387706] x5 : 00000000a0a0a0a0 x4 : ffffa02609b77000
[    4.387707] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.387707] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.387709] Call trace:
[    4.387710]  its_cpu_init+0x2f0/0x494
[    4.387712]  gic_starting_cpu+0x18/0x24
[    4.387713]  cpuhp_invoke_callback+0x84/0x1e0
[    4.387714]  notify_cpu_starting+0x9c/0xb8
[    4.387716]  secondary_start_kernel+0xdc/0x168
[    4.387717] ---[ end trace f68728a0d3053bca ]---
[    4.387723] GICv3: CPU120: using allocated LPI pending table 
@0x000000007a980000
[    4.387748] Xen: initializing cpu120
[    4.387761] CPU120: Booted secondary processor 0x0000000708 [0x481fd010]
[    4.416781] Detected VIPT I-cache on CPU121
[    4.416954] GICv3: CPU121: found redistributor 709 region 
60:0x00000000aa820000
[    4.423736] ------------[ cut here ]------------
[    4.423740] WARNING: CPU: 121 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.423741] Modules linked in:
[    4.423743] CPU: 121 PID: 0 Comm: swapper/121 Tainted: G W         
5.5.0-rc5 #132
[    4.423744] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.423746] pc : its_cpu_init+0x2f0/0x494
[    4.423748] lr : its_cpu_init+0x2ec/0x494
[    4.423748] sp : ffff800012813ee0
[    4.423749] x29: ffff800012813ee0 x28: 0000000000000000
[    4.423750] x27: 0000000000000000 x26: 0000000000000000
[    4.423751] x25: 0000000000000000 x24: ffff800013be0000
[    4.423752] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.423753] x21: ffff8000117a9000 x20: fffffe0001ca6400
[    4.423754] x19: ffff8000117db000 x18: 0000000000000000
[    4.423755] x17: 0000000000000000 x16: 0000000000000000
[    4.423756] x15: 0000000000000000 x14: 0000000000000000
[    4.423757] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.423758] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.423759] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.423760] x7 : 0000000000000000 x6 : 0000000000000070
[    4.423761] x5 : 00000000a0a0a0a0 x4 : ffffa02609b8d000
[    4.423762] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.423763] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.423764] Call trace:
[    4.423766]  its_cpu_init+0x2f0/0x494
[    4.423767]  gic_starting_cpu+0x18/0x24
[    4.423769]  cpuhp_invoke_callback+0x84/0x1e0
[    4.423770]  notify_cpu_starting+0x9c/0xb8
[    4.423772]  secondary_start_kernel+0xdc/0x168
[    4.423772] ---[ end trace f68728a0d3053bcb ]---
[    4.423778] GICv3: CPU121: using allocated LPI pending table 
@0x000000007a990000
[    4.423800] Xen: initializing cpu121
[    4.423810] CPU121: Booted secondary processor 0x0000000709 [0x481fd010]
[    4.452856] Detected VIPT I-cache on CPU122
[    4.453028] GICv3: CPU122: found redistributor 70a region 
61:0x00000000aa840000
[    4.459809] ------------[ cut here ]------------
[    4.459812] WARNING: CPU: 122 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.459813] Modules linked in:
[    4.459815] CPU: 122 PID: 0 Comm: swapper/122 Tainted: G W         
5.5.0-rc5 #132
[    4.459816] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.459818] pc : its_cpu_init+0x2f0/0x494
[    4.459819] lr : its_cpu_init+0x2ec/0x494
[    4.459820] sp : ffff80001281bee0
[    4.459821] x29: ffff80001281bee0 x28: 0000000000000000
[    4.459822] x27: 0000000000000000 x26: 0000000000000000
[    4.459823] x25: 0000000000000000 x24: ffff800013c40000
[    4.459824] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.459825] x21: ffff8000117a9000 x20: fffffe0001ca6800
[    4.459826] x19: ffff8000117db000 x18: 0000000000000000
[    4.459827] x17: 0000000000000000 x16: 0000000000000000
[    4.459828] x15: 0000000000000000 x14: 0000000000000000
[    4.459829] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.459830] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.459831] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.459832] x7 : 0000000000000000 x6 : 0000000000000070
[    4.459833] x5 : 00000000a0a0a0a0 x4 : ffffa02609ba3000
[    4.459834] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.459835] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.459836] Call trace:
[    4.459837]  its_cpu_init+0x2f0/0x494
[    4.459839]  gic_starting_cpu+0x18/0x24
[    4.459840]  cpuhp_invoke_callback+0x84/0x1e0
[    4.459841]  notify_cpu_starting+0x9c/0xb8
[    4.459843]  secondary_start_kernel+0xdc/0x168
[    4.459843] ---[ end trace f68728a0d3053bcc ]---
[    4.459849] GICv3: CPU122: using allocated LPI pending table 
@0x000000007a9a0000
[    4.459870] Xen: initializing cpu122
[    4.459881] CPU122: Booted secondary processor 0x000000070a [0x481fd010]
[    4.488953] Detected VIPT I-cache on CPU123
[    4.489126] GICv3: CPU123: found redistributor 70b region 
61:0x00000000aa860000
[    4.495905] ------------[ cut here ]------------
[    4.495909] WARNING: CPU: 123 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.495910] Modules linked in:
[    4.495912] CPU: 123 PID: 0 Comm: swapper/123 Tainted: G W         
5.5.0-rc5 #132
[    4.495914] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.495916] pc : its_cpu_init+0x2f0/0x494
[    4.495917] lr : its_cpu_init+0x2ec/0x494
[    4.495917] sp : ffff800012823ee0
[    4.495918] x29: ffff800012823ee0 x28: 0000000000000000
[    4.495919] x27: 0000000000000000 x26: 0000000000000000
[    4.495920] x25: 0000000000000000 x24: ffff800013c60000
[    4.495921] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.495922] x21: ffff8000117a9000 x20: fffffe0001ca6c00
[    4.495923] x19: ffff8000117db000 x18: 0000000000000000
[    4.495924] x17: 0000000000000000 x16: 0000000000000000
[    4.495925] x15: 0000000000000000 x14: 0000000000000000
[    4.495926] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.495927] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.495928] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.495929] x7 : 0000000000000000 x6 : 0000000000000070
[    4.495930] x5 : 00000000a0a0a0a0 x4 : ffffa02609bb9000
[    4.495931] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.495932] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.495934] Call trace:
[    4.495935]  its_cpu_init+0x2f0/0x494
[    4.495937]  gic_starting_cpu+0x18/0x24
[    4.495938]  cpuhp_invoke_callback+0x84/0x1e0
[    4.495939]  notify_cpu_starting+0x9c/0xb8
[    4.495941]  secondary_start_kernel+0xdc/0x168
[    4.495942] ---[ end trace f68728a0d3053bcd ]---
[    4.495947] GICv3: CPU123: using allocated LPI pending table 
@0x000000007a9b0000
[    4.495968] Xen: initializing cpu123
[    4.495979] CPU123: Booted secondary processor 0x000000070b [0x481fd010]
[    4.525030] Detected VIPT I-cache on CPU124
[    4.525212] GICv3: CPU124: found redistributor 70c region 
62:0x00000000aa880000
[    4.532003] ------------[ cut here ]------------
[    4.532008] WARNING: CPU: 124 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.532008] Modules linked in:
[    4.532011] CPU: 124 PID: 0 Comm: swapper/124 Tainted: G W         
5.5.0-rc5 #132
[    4.532012] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.532014] pc : its_cpu_init+0x2f0/0x494
[    4.532015] lr : its_cpu_init+0x2ec/0x494
[    4.532016] sp : ffff80001282bee0
[    4.532016] x29: ffff80001282bee0 x28: 0000000000000000
[    4.532017] x27: 0000000000000000 x26: 0000000000000000
[    4.532019] x25: 0000000000000000 x24: ffff800013cc0000
[    4.532020] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.532021] x21: ffff8000117a9000 x20: fffffe0001ca7000
[    4.532022] x19: ffff8000117db000 x18: 0000000000000000
[    4.532022] x17: 0000000000000000 x16: 0000000000000000
[    4.532023] x15: 0000000000000000 x14: 0000000000000000
[    4.532024] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.532025] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.532026] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.532027] x7 : 0000000000000000 x6 : 0000000000000070
[    4.532028] x5 : 00000000a0a0a0a0 x4 : ffffa02609bcf000
[    4.532029] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.532030] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.532032] Call trace:
[    4.532033]  its_cpu_init+0x2f0/0x494
[    4.532034]  gic_starting_cpu+0x18/0x24
[    4.532036]  cpuhp_invoke_callback+0x84/0x1e0
[    4.532037]  notify_cpu_starting+0x9c/0xb8
[    4.532039]  secondary_start_kernel+0xdc/0x168
[    4.532040] ---[ end trace f68728a0d3053bce ]---
[    4.532045] GICv3: CPU124: using allocated LPI pending table 
@0x000000007a9c0000
[    4.532070] Xen: initializing cpu124
[    4.532084] CPU124: Booted secondary processor 0x000000070c [0x481fd010]
[    4.561096] Detected VIPT I-cache on CPU125
[    4.561273] GICv3: CPU125: found redistributor 70d region 
62:0x00000000aa8a0000
[    4.568054] ------------[ cut here ]------------
[    4.568058] WARNING: CPU: 125 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.568058] Modules linked in:
[    4.568061] CPU: 125 PID: 0 Comm: swapper/125 Tainted: G W         
5.5.0-rc5 #132
[    4.568062] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.568064] pc : its_cpu_init+0x2f0/0x494
[    4.568065] lr : its_cpu_init+0x2ec/0x494
[    4.568066] sp : ffff800012833ee0
[    4.568066] x29: ffff800012833ee0 x28: 0000000000000000
[    4.568067] x27: 0000000000000000 x26: 0000000000000000
[    4.568068] x25: 0000000000000000 x24: ffff800013ce0000
[    4.568070] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.568071] x21: ffff8000117a9000 x20: fffffe0001ca7400
[    4.568071] x19: ffff8000117db000 x18: 0000000000000000
[    4.568072] x17: 0000000000000000 x16: 0000000000000000
[    4.568073] x15: 0000000000000000 x14: 0000000000000000
[    4.568074] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.568075] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.568076] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.568077] x7 : 0000000000000000 x6 : 0000000000000070
[    4.568078] x5 : 00000000a0a0a0a0 x4 : ffffa02609be5000
[    4.568079] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.568080] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.568081] Call trace:
[    4.568083]  its_cpu_init+0x2f0/0x494
[    4.568084]  gic_starting_cpu+0x18/0x24
[    4.568085]  cpuhp_invoke_callback+0x84/0x1e0
[    4.568087]  notify_cpu_starting+0x9c/0xb8
[    4.568089]  secondary_start_kernel+0xdc/0x168
[    4.568089] ---[ end trace f68728a0d3053bcf ]---
[    4.568094] GICv3: CPU125: using allocated LPI pending table 
@0x000000007a9d0000
[    4.568117] Xen: initializing cpu125
[    4.568128] CPU125: Booted secondary processor 0x000000070d [0x481fd010]
[    4.597170] Detected VIPT I-cache on CPU126
[    4.597347] GICv3: CPU126: found redistributor 70e region 
63:0x00000000aa8c0000
[    4.604128] ------------[ cut here ]------------
[    4.604132] WARNING: CPU: 126 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.604133] Modules linked in:
[    4.604135] CPU: 126 PID: 0 Comm: swapper/126 Tainted: G W         
5.5.0-rc5 #132
[    4.604136] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.604138] pc : its_cpu_init+0x2f0/0x494
[    4.604140] lr : its_cpu_init+0x2ec/0x494
[    4.604140] sp : ffff80001288bee0
[    4.604141] x29: ffff80001288bee0 x28: 0000000000000000
[    4.604142] x27: 0000000000000000 x26: 0000000000000000
[    4.604143] x25: 0000000000000000 x24: ffff800013d40000
[    4.604144] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.604145] x21: ffff8000117a9000 x20: fffffe0001ca7800
[    4.604146] x19: ffff8000117db000 x18: 0000000000000000
[    4.604147] x17: 0000000000000000 x16: 0000000000000000
[    4.604148] x15: 0000000000000000 x14: 0000000000000000
[    4.604149] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.604150] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.604151] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.604152] x7 : 0000000000000000 x6 : 0000000000000070
[    4.604153] x5 : 00000000a0a0a0a0 x4 : ffffa02609bfb000
[    4.604154] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.604155] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.604156] Call trace:
[    4.604157]  its_cpu_init+0x2f0/0x494
[    4.604159]  gic_starting_cpu+0x18/0x24
[    4.604160]  cpuhp_invoke_callback+0x84/0x1e0
[    4.604161]  notify_cpu_starting+0x9c/0xb8
[    4.604163]  secondary_start_kernel+0xdc/0x168
[    4.604164] ---[ end trace f68728a0d3053bd0 ]---
[    4.604169] GICv3: CPU126: using allocated LPI pending table 
@0x000000007a9e0000
[    4.604191] Xen: initializing cpu126
[    4.604202] CPU126: Booted secondary processor 0x000000070e [0x481fd010]
[    4.633244] Detected VIPT I-cache on CPU127
[    4.633422] GICv3: CPU127: found redistributor 70f region 
63:0x00000000aa8e0000
[    4.640202] ------------[ cut here ]------------
[    4.640206] WARNING: CPU: 127 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
[    4.640206] Modules linked in:
[    4.640209] CPU: 127 PID: 0 Comm: swapper/127 Tainted: G W         
5.5.0-rc5 #132
[    4.640210] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
[    4.640212] pc : its_cpu_init+0x2f0/0x494
[    4.640213] lr : its_cpu_init+0x2ec/0x494
[    4.640214] sp : ffff800012893ee0
[    4.640214] x29: ffff800012893ee0 x28: 0000000000000000
[    4.640216] x27: 0000000000000000 x26: 0000000000000000
[    4.640217] x25: 0000000000000000 x24: ffff800013d60000
[    4.640218] x23: ffff8000111f4000 x22: ffff8000119cd000
[    4.640219] x21: ffff8000117a9000 x20: fffffe0001ca7c00
[    4.640220] x19: ffff8000117db000 x18: 0000000000000000
[    4.640221] x17: 0000000000000000 x16: 0000000000000000
[    4.640222] x15: 0000000000000000 x14: 0000000000000000
[    4.640223] x13: 0000000000000000 x12: f4e33ba569c0a400
[    4.640224] x11: ffffffffffffffff x10: ffff8000119916a0
[    4.640225] x9 : 0000000000000000 x8 : ffff8000119916a0
[    4.640225] x7 : 0000000000000000 x6 : 0000000000000070
[    4.640226] x5 : 00000000a0a0a0a0 x4 : ffffa02609c11000
[    4.640227] x3 : 000000000000003d x2 : ffffffffffffffff
[    4.640228] x1 : 0000000000010000 x0 : 00000000ffffffed
[    4.640230] Call trace:
[    4.640231]  its_cpu_init+0x2f0/0x494
[    4.640232]  gic_starting_cpu+0x18/0x24
[    4.640234]  cpuhp_invoke_callback+0x84/0x1e0
[    4.640235]  notify_cpu_starting+0x9c/0xb8
[    4.640237]  secondary_start_kernel+0xdc/0x168
[    4.640238] ---[ end trace f68728a0d3053bd1 ]---
[    4.640243] GICv3: CPU127: using allocated LPI pending table 
@0x000000007a9f0000
[    4.640265] Xen: initializing cpu127
[    4.640276] CPU127: Booted secondary processor 0x000000070f [0x481fd010]
[    4.640396] smp: Brought up 4 nodes, 128 CPUs
[    4.642019] SMP: Total of 128 processors activated.
[    4.642021] CPU features: detected: Privileged Access Never
[    4.642022] CPU features: detected: User Access Override
[    4.642024] CPU features: detected: Common not Private translations
[    4.642025] CPU features: detected: RAS Extension Support
[    4.642026] CPU features: detected: CRC32 instructions
[    4.650223] CPU: All CPU(s) started at EL1
[    4.651565] alternatives: patching kernel code
[    4.663208] devtmpfs: initialized
[    4.663435] KASLR disabled due to lack of seed
[    4.667295] clocksource: jiffies: mask: 0xffffffff max_cycles: 
0xffffffff, max_idle_ns: 7645041785100000 ns
[    4.667373] futex hash table entries: 32768 (order: 9, 2097152 bytes, 
vmalloc)
[    4.670897] pinctrl core: initialized pinctrl subsystem
[    4.671066] thermal_sys: Registered thermal governor 'step_wise'
[    4.671067] thermal_sys: Registered thermal governor 'power_allocator'
[    4.671075] DMI not present or invalid.
[    4.671209] NET: Registered protocol family 16
[    4.681273] DMA: preallocated 256 KiB pool for atomic allocations
[    4.681278] audit: initializing netlink subsys (disabled)
[    4.681346] audit: type=2000 audit(4.668:1): state=initialized 
audit_enabled=0 res=1
[    4.681577] Detected 1 PCC Subspaces
[    4.681598] Registering PCC driver as Mailbox controller
[    4.681645] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    4.686845] ACPI: bus type PCI registered
[    4.686847] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    4.686930] Serial: AMBA PL011 UART driver
[    4.690841] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    4.690843] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    4.690845] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    4.690846] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    4.695178] cryptd: max_cpu_qlen set to 1000
[    4.703212] ACPI: Added _OSI(Module Device)
[    4.703214] ACPI: Added _OSI(Processor Device)
[    4.703216] ACPI: Added _OSI(3.0 _SCP Extensions)
[    4.703217] ACPI: Added _OSI(Processor Aggregator Device)
[    4.703219] ACPI: Added _OSI(Linux-Dell-Video)
[    4.703220] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[    4.703222] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[    4.709853] ACPI: 2 ACPI AML tables successfully acquired and loaded
[    4.712536] ACPI: Interpreter enabled
[    4.712539] ACPI: Using GIC for interrupt routing
[    4.712549] ACPI: MCFG table detected, 1 entries
[    4.712824] HEST: Table parsing has been initialized.
[    4.733475] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
[    4.733481] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    4.733567] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[    4.733637] acpi PNP0A08:00: _OSC: OS now controls [PME AER 
PCIeCapability]
[    4.735011] acpi PNP0A08:00: [Firmware Bug]: ECAM area [mem 
0xd0000000-0xd3ffffff] not reserved in ACPI namespace
[    4.735021] acpi PNP0A08:00: ECAM at [mem 0xd0000000-0xd3ffffff] for 
[bus 00-3f]
[    4.735041] Remapped I/O 0x00000000efff0000 to [io  0x0000-0xffff window]
[    4.735087] PCI host bridge to bus 0000:00
[    4.735089] pci_bus 0000:00: root bus resource [mem 
0x80000000000-0x83fffffffff pref window]
[    4.735091] pci_bus 0000:00: root bus resource [mem 
0xe0000000-0xeffeffff window]
[    4.735093] pci_bus 0000:00: root bus resource [io  0x0000-0xffff window]
[    4.735095] pci_bus 0000:00: root bus resource [bus 00-3f]
[    4.735133] pci 0000:00:00.0: [19e5:a120] type 01 class 0x060400
[    4.735189] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.745386] pci 0000:00:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.745406] pci 0000:00:08.0: [19e5:a120] type 01 class 0x060400
[    4.745453] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.750511] pci 0000:00:08.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.750526] pci 0000:00:0c.0: [19e5:a120] type 01 class 0x060400
[    4.750572] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.755654] pci 0000:00:0c.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.755668] pci 0000:00:10.0: [19e5:a120] type 01 class 0x060400
[    4.755715] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.760772] pci 0000:00:10.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.760782] pci 0000:00:11.0: [19e5:a120] type 01 class 0x060400
[    4.760829] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.765910] pci 0000:00:11.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.765921] pci 0000:00:12.0: [19e5:a120] type 01 class 0x060400
[    4.765968] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.771024] pci 0000:00:12.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.771063] pci 0000:01:00.0: [19e5:371e] type 01 class 0x060400
[    4.771126] pci 0000:01:00.0: supports D1 D2
[    4.771128] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.776212] pci 0000:01:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.776252] pci 0000:02:00.0: [19e5:371e] type 01 class 0x060400
[    4.776321] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.781380] pci 0000:02:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.781393] pci 0000:02:01.0: [19e5:371e] type 01 class 0x060400
[    4.781460] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.786540] pci 0000:02:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.786553] pci 0000:02:02.0: [19e5:371e] type 01 class 0x060400
[    4.786620] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.791677] pci 0000:02:02.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.791692] pci 0000:02:03.0: [19e5:371e] type 01 class 0x060400
[    4.791759] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.796840] pci 0000:02:03.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.796914] pci 0000:03:00.0: [19e5:1822] type 00 class 0x020000
[    4.796927] pci 0000:03:00.0: reg 0x10: [mem 
0x8001fd00000-0x8001fd1ffff 64bit pref]
[    4.796933] pci 0000:03:00.0: reg 0x18: [mem 
0x8001ff00000-0x8001ff07fff 64bit pref]
[    4.796938] pci 0000:03:00.0: reg 0x20: [mem 
0x8001fc00000-0x8001fcfffff 64bit pref]
[    4.796942] pci 0000:03:00.0: reg 0x30: [mem 0xe6a00000-0xe6afffff pref]
[    4.797000] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.797015] pci 0000:03:00.0: reg 0x224: [mem 
0x8001ff08000-0x8001ff0bfff 64bit pref]
[    4.797018] pci 0000:03:00.0: VF(n) BAR0 space: [mem 
0x8001ff08000-0x8001fff7fff 64bit pref] (contains BAR0 for 60 VFs)
[    4.797024] pci 0000:03:00.0: reg 0x22c: [mem 
0x8001fd20000-0x8001fd27fff 64bit pref]
[    4.797025] pci 0000:03:00.0: VF(n) BAR2 space: [mem 
0x8001fd20000-0x8001fefffff 64bit pref] (contains BAR2 for 60 VFs)
[    4.797031] pci 0000:03:00.0: reg 0x234: [mem 
0x8001c000000-0x8001c0fffff 64bit pref]
[    4.797033] pci 0000:03:00.0: VF(n) BAR4 space: [mem 
0x8001c000000-0x8001fbfffff 64bit pref] (contains BAR4 for 60 VFs)
[    4.802185] pci 0000:03:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.802229] pci 0000:04:00.0: [19e5:1822] type 00 class 0x020000
[    4.802242] pci 0000:04:00.0: reg 0x10: [mem 
0x8001bd00000-0x8001bd1ffff 64bit pref]
[    4.802248] pci 0000:04:00.0: reg 0x18: [mem 
0x8001bf00000-0x8001bf07fff 64bit pref]
[    4.802253] pci 0000:04:00.0: reg 0x20: [mem 
0x8001bc00000-0x8001bcfffff 64bit pref]
[    4.802257] pci 0000:04:00.0: reg 0x30: [mem 0xe6900000-0xe69fffff pref]
[    4.802316] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.802331] pci 0000:04:00.0: reg 0x224: [mem 
0x8001bf08000-0x8001bf0bfff 64bit pref]
[    4.802333] pci 0000:04:00.0: VF(n) BAR0 space: [mem 
0x8001bf08000-0x8001bff7fff 64bit pref] (contains BAR0 for 60 VFs)
[    4.802338] pci 0000:04:00.0: reg 0x22c: [mem 
0x8001bd20000-0x8001bd27fff 64bit pref]
[    4.802340] pci 0000:04:00.0: VF(n) BAR2 space: [mem 
0x8001bd20000-0x8001befffff 64bit pref] (contains BAR2 for 60 VFs)
[    4.802346] pci 0000:04:00.0: reg 0x234: [mem 
0x80018000000-0x800180fffff 64bit pref]
[    4.802347] pci 0000:04:00.0: VF(n) BAR4 space: [mem 
0x80018000000-0x8001bbfffff 64bit pref] (contains BAR4 for 60 VFs)
[    4.807480] pci 0000:04:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.807519] pci 0000:05:00.0: [19e5:1822] type 00 class 0x020000
[    4.807532] pci 0000:05:00.0: reg 0x10: [mem 
0x80017d00000-0x80017d1ffff 64bit pref]
[    4.807538] pci 0000:05:00.0: reg 0x18: [mem 
0x80017f00000-0x80017f07fff 64bit pref]
[    4.807543] pci 0000:05:00.0: reg 0x20: [mem 
0x80017c00000-0x80017cfffff 64bit pref]
[    4.807547] pci 0000:05:00.0: reg 0x30: [mem 0xe6800000-0xe68fffff pref]
[    4.807605] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.807620] pci 0000:05:00.0: reg 0x224: [mem 
0x80017f08000-0x80017f0bfff 64bit pref]
[    4.807622] pci 0000:05:00.0: VF(n) BAR0 space: [mem 
0x80017f08000-0x80017ff7fff 64bit pref] (contains BAR0 for 60 VFs)
[    4.807628] pci 0000:05:00.0: reg 0x22c: [mem 
0x80017d20000-0x80017d27fff 64bit pref]
[    4.807630] pci 0000:05:00.0: VF(n) BAR2 space: [mem 
0x80017d20000-0x80017efffff 64bit pref] (contains BAR2 for 60 VFs)
[    4.807635] pci 0000:05:00.0: reg 0x234: [mem 
0x80014000000-0x800140fffff 64bit pref]
[    4.807637] pci 0000:05:00.0: VF(n) BAR4 space: [mem 
0x80014000000-0x80017bfffff 64bit pref] (contains BAR4 for 60 VFs)
[    4.812790] pci 0000:05:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.812834] pci 0000:06:00.0: [19e5:1822] type 00 class 0x020000
[    4.812847] pci 0000:06:00.0: reg 0x10: [mem 
0x80013d00000-0x80013d1ffff 64bit pref]
[    4.812853] pci 0000:06:00.0: reg 0x18: [mem 
0x80013f00000-0x80013f07fff 64bit pref]
[    4.812858] pci 0000:06:00.0: reg 0x20: [mem 
0x80013c00000-0x80013cfffff 64bit pref]
[    4.812862] pci 0000:06:00.0: reg 0x30: [mem 0xe6700000-0xe67fffff pref]
[    4.812921] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.812936] pci 0000:06:00.0: reg 0x224: [mem 
0x80013f08000-0x80013f0bfff 64bit pref]
[    4.812938] pci 0000:06:00.0: VF(n) BAR0 space: [mem 
0x80013f08000-0x80013ff7fff 64bit pref] (contains BAR0 for 60 VFs)
[    4.812944] pci 0000:06:00.0: reg 0x22c: [mem 
0x80013d20000-0x80013d27fff 64bit pref]
[    4.812945] pci 0000:06:00.0: VF(n) BAR2 space: [mem 
0x80013d20000-0x80013efffff 64bit pref] (contains BAR2 for 60 VFs)
[    4.812951] pci 0000:06:00.0: reg 0x234: [mem 
0x80010000000-0x800100fffff 64bit pref]
[    4.812953] pci 0000:06:00.0: VF(n) BAR4 space: [mem 
0x80010000000-0x80013bfffff 64bit pref] (contains BAR4 for 60 VFs)
[    4.818085] pci 0000:06:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.818150] pci 0000:08:00.0: [19e5:371e] type 01 class 0x060400
[    4.818215] pci 0000:08:00.0: supports D1 D2
[    4.818217] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.818231] pci 0000:08:00.0: 63.008 Gb/s available PCIe bandwidth, 
limited by 8 GT/s x8 link at 0000:00:0c.0 (capable of 126.016 Gb/s with 
8 GT/s x16 link)
[    4.823312] pci 0000:08:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.823347] pci 0000:09:00.0: [19e5:371e] type 01 class 0x060400
[    4.823415] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.828476] pci 0000:09:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.828489] pci 0000:09:01.0: [19e5:371e] type 01 class 0x060400
[    4.828557] pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.833640] pci 0000:09:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.833655] pci 0000:09:02.0: [19e5:371e] type 01 class 0x060400
[    4.833722] pci 0000:09:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.838780] pci 0000:09:02.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.838793] pci 0000:09:03.0: [19e5:371e] type 01 class 0x060400
[    4.838860] pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.843940] pci 0000:09:03.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.844010] pci 0000:0a:00.0: [19e5:1822] type 00 class 0x020000
[    4.844024] pci 0000:0a:00.0: reg 0x10: [mem 
0x8000fd00000-0x8000fd1ffff 64bit pref]
[    4.844030] pci 0000:0a:00.0: reg 0x18: [mem 
0x8000ff00000-0x8000ff07fff 64bit pref]
[    4.844035] pci 0000:0a:00.0: reg 0x20: [mem 
0x8000fc00000-0x8000fcfffff 64bit pref]
[    4.844039] pci 0000:0a:00.0: reg 0x30: [mem 0xe6600000-0xe66fffff pref]
[    4.844099] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.844115] pci 0000:0a:00.0: reg 0x224: [mem 
0x8000ff08000-0x8000ff0bfff 64bit pref]
[    4.844117] pci 0000:0a:00.0: VF(n) BAR0 space: [mem 
0x8000ff08000-0x8000fff7fff 64bit pref] (contains BAR0 for 60 VFs)
[    4.844123] pci 0000:0a:00.0: reg 0x22c: [mem 
0x8000fd20000-0x8000fd27fff 64bit pref]
[    4.844124] pci 0000:0a:00.0: VF(n) BAR2 space: [mem 
0x8000fd20000-0x8000fefffff 64bit pref] (contains BAR2 for 60 VFs)
[    4.844130] pci 0000:0a:00.0: reg 0x234: [mem 
0x8000c000000-0x8000c0fffff 64bit pref]
[    4.844132] pci 0000:0a:00.0: VF(n) BAR4 space: [mem 
0x8000c000000-0x8000fbfffff 64bit pref] (contains BAR4 for 60 VFs)
[    4.844220] pci 0000:0a:00.0: 63.008 Gb/s available PCIe bandwidth, 
limited by 8 GT/s x8 link at 0000:00:0c.0 (capable of 126.016 Gb/s with 
8 GT/s x16 link)
[    4.849269] pci 0000:0a:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.849309] pci 0000:0b:00.0: [19e5:1822] type 00 class 0x020000
[    4.849322] pci 0000:0b:00.0: reg 0x10: [mem 
0x8000bd00000-0x8000bd1ffff 64bit pref]
[    4.849328] pci 0000:0b:00.0: reg 0x18: [mem 
0x8000bf00000-0x8000bf07fff 64bit pref]
[    4.849333] pci 0000:0b:00.0: reg 0x20: [mem 
0x8000bc00000-0x8000bcfffff 64bit pref]
[    4.849337] pci 0000:0b:00.0: reg 0x30: [mem 0xe6500000-0xe65fffff pref]
[    4.849397] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.849412] pci 0000:0b:00.0: reg 0x224: [mem 
0x8000bf08000-0x8000bf0bfff 64bit pref]
[    4.849414] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 
0x8000bf08000-0x8000bff7fff 64bit pref] (contains BAR0 for 60 VFs)
[    4.849420] pci 0000:0b:00.0: reg 0x22c: [mem 
0x8000bd20000-0x8000bd27fff 64bit pref]
[    4.849422] pci 0000:0b:00.0: VF(n) BAR2 space: [mem 
0x8000bd20000-0x8000befffff 64bit pref] (contains BAR2 for 60 VFs)
[    4.849427] pci 0000:0b:00.0: reg 0x234: [mem 
0x80008000000-0x800080fffff 64bit pref]
[    4.849429] pci 0000:0b:00.0: VF(n) BAR4 space: [mem 
0x80008000000-0x8000bbfffff 64bit pref] (contains BAR4 for 60 VFs)
[    4.849518] pci 0000:0b:00.0: 63.008 Gb/s available PCIe bandwidth, 
limited by 8 GT/s x8 link at 0000:00:0c.0 (capable of 126.016 Gb/s with 
8 GT/s x16 link)
[    4.854592] pci 0000:0b:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.854636] pci 0000:0c:00.0: [19e5:1822] type 00 class 0x020000
[    4.854649] pci 0000:0c:00.0: reg 0x10: [mem 
0x80007d00000-0x80007d1ffff 64bit pref]
[    4.854655] pci 0000:0c:00.0: reg 0x18: [mem 
0x80007f00000-0x80007f07fff 64bit pref]
[    4.854660] pci 0000:0c:00.0: reg 0x20: [mem 
0x80007c00000-0x80007cfffff 64bit pref]
[    4.854664] pci 0000:0c:00.0: reg 0x30: [mem 0xe6400000-0xe64fffff pref]
[    4.854726] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.854741] pci 0000:0c:00.0: reg 0x224: [mem 
0x80007f08000-0x80007f0bfff 64bit pref]
[    4.854743] pci 0000:0c:00.0: VF(n) BAR0 space: [mem 
0x80007f08000-0x80007ff7fff 64bit pref] (contains BAR0 for 60 VFs)
[    4.854749] pci 0000:0c:00.0: reg 0x22c: [mem 
0x80007d20000-0x80007d27fff 64bit pref]
[    4.854750] pci 0000:0c:00.0: VF(n) BAR2 space: [mem 
0x80007d20000-0x80007efffff 64bit pref] (contains BAR2 for 60 VFs)
[    4.854756] pci 0000:0c:00.0: reg 0x234: [mem 
0x80004000000-0x800040fffff 64bit pref]
[    4.854758] pci 0000:0c:00.0: VF(n) BAR4 space: [mem 
0x80004000000-0x80007bfffff 64bit pref] (contains BAR4 for 60 VFs)
[    4.854847] pci 0000:0c:00.0: 63.008 Gb/s available PCIe bandwidth, 
limited by 8 GT/s x8 link at 0000:00:0c.0 (capable of 126.016 Gb/s with 
8 GT/s x16 link)
[    4.859895] pci 0000:0c:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.859935] pci 0000:0d:00.0: [19e5:1822] type 00 class 0x020000
[    4.859949] pci 0000:0d:00.0: reg 0x10: [mem 
0x80003d00000-0x80003d1ffff 64bit pref]
[    4.859954] pci 0000:0d:00.0: reg 0x18: [mem 
0x80003f00000-0x80003f07fff 64bit pref]
[    4.859960] pci 0000:0d:00.0: reg 0x20: [mem 
0x80003c00000-0x80003cfffff 64bit pref]
[    4.859964] pci 0000:0d:00.0: reg 0x30: [mem 0xe6300000-0xe63fffff pref]
[    4.860024] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.860040] pci 0000:0d:00.0: reg 0x224: [mem 
0x80003f08000-0x80003f0bfff 64bit pref]
[    4.860042] pci 0000:0d:00.0: VF(n) BAR0 space: [mem 
0x80003f08000-0x80003ff7fff 64bit pref] (contains BAR0 for 60 VFs)
[    4.860047] pci 0000:0d:00.0: reg 0x22c: [mem 
0x80003d20000-0x80003d27fff 64bit pref]
[    4.860049] pci 0000:0d:00.0: VF(n) BAR2 space: [mem 
0x80003d20000-0x80003efffff 64bit pref] (contains BAR2 for 60 VFs)
[    4.860055] pci 0000:0d:00.0: reg 0x234: [mem 
0x80000000000-0x800000fffff 64bit pref]
[    4.860056] pci 0000:0d:00.0: VF(n) BAR4 space: [mem 
0x80000000000-0x80003bfffff 64bit pref] (contains BAR4 for 60 VFs)
[    4.860145] pci 0000:0d:00.0: 63.008 Gb/s available PCIe bandwidth, 
limited by 8 GT/s x8 link at 0000:00:0c.0 (capable of 126.016 Gb/s with 
8 GT/s x16 link)
[    4.865216] pci 0000:0d:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.865278] pci 0000:0e:00.0: [19e5:1710] type 00 class 0x118000
[    4.865303] pci 0000:0e:00.0: reg 0x10: [mem 0xe0000000-0xe3ffffff pref]
[    4.865312] pci 0000:0e:00.0: reg 0x14: [mem 0xe6200000-0xe62fffff]
[    4.865457] pci 0000:0e:00.0: supports D1
[    4.865459] pci 0000:0e:00.0: PME# supported from D0 D1 D3hot
[    4.870547] pci 0000:0e:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.870598] pci 0000:0f:00.0: [19e5:1711] type 00 class 0x030000
[    4.870628] pci 0000:0f:00.0: reg 0x10: [mem 0xe4000000-0xe5ffffff pref]
[    4.870641] pci 0000:0f:00.0: reg 0x14: [mem 0xe6000000-0xe61fffff]
[    4.870816] pci 0000:0f:00.0: supports D1
[    4.870818] pci 0000:0f:00.0: PME# supported from D0 D1 D3hot
[    4.876021] pci 0000:0f:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.876077] pci 0000:02:00.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 03] add_size 3e00000 add_align 
100000
[    4.876081] pci 0000:02:01.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 04] add_size 3e00000 add_align 
100000
[    4.876083] pci 0000:02:02.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 05] add_size 3e00000 add_align 
100000
[    4.876086] pci 0000:02:03.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 06] add_size 3e00000 add_align 
100000
[    4.876089] pci 0000:01:00.0: bridge window [mem 
0x00100000-0x008fffff 64bit pref] to [bus 02-06] add_size f800000 
add_align 100000
[    4.876092] pci 0000:00:00.0: bridge window [mem 
0x00100000-0x008fffff 64bit pref] to [bus 01-06] add_size f800000 
add_align 100000
[    4.876095] pci 0000:09:00.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 0a] add_size 3e00000 add_align 
100000
[    4.876099] pci 0000:09:01.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 0b] add_size 3e00000 add_align 
100000
[    4.876102] pci 0000:09:02.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 0c] add_size 3e00000 add_align 
100000
[    4.876105] pci 0000:09:03.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 0d] add_size 3e00000 add_align 
100000
[    4.876108] pci 0000:08:00.0: bridge window [mem 
0x00100000-0x008fffff 64bit pref] to [bus 09-0d] add_size f800000 
add_align 100000
[    4.876111] pci 0000:00:0c.0: bridge window [mem 
0x00100000-0x008fffff 64bit pref] to [bus 08-0d] add_size f800000 
add_align 100000
[    4.876121] pci 0000:00:10.0: BAR 14: assigned [mem 
0xe0000000-0xe5ffffff]
[    4.876123] pci 0000:00:11.0: BAR 14: assigned [mem 
0xe6000000-0xe8ffffff]
[    4.876125] pci 0000:00:00.0: BAR 14: assigned [mem 
0xe9000000-0xe93fffff]
[    4.876127] pci 0000:00:00.0: BAR 15: assigned [mem 
0x80000000000-0x8000fffffff 64bit pref]
[    4.876129] pci 0000:00:0c.0: BAR 14: assigned [mem 
0xe9400000-0xe97fffff]
[    4.876131] pci 0000:00:0c.0: BAR 15: assigned [mem 
0x80010000000-0x8001fffffff 64bit pref]
[    4.876135] pci 0000:01:00.0: BAR 14: assigned [mem 
0xe9000000-0xe93fffff]
[    4.876136] pci 0000:01:00.0: BAR 15: assigned [mem 
0x80000000000-0x8000fffffff 64bit pref]
[    4.876140] pci 0000:02:00.0: BAR 14: assigned [mem 
0xe9000000-0xe90fffff]
[    4.876142] pci 0000:02:00.0: BAR 15: assigned [mem 
0x80000000000-0x80003ffffff 64bit pref]
[    4.876144] pci 0000:02:01.0: BAR 14: assigned [mem 
0xe9100000-0xe91fffff]
[    4.876145] pci 0000:02:01.0: BAR 15: assigned [mem 
0x80004000000-0x80007ffffff 64bit pref]
[    4.876147] pci 0000:02:02.0: BAR 14: assigned [mem 
0xe9200000-0xe92fffff]
[    4.876149] pci 0000:02:02.0: BAR 15: assigned [mem 
0x80008000000-0x8000bffffff 64bit pref]
[    4.876150] pci 0000:02:03.0: BAR 14: assigned [mem 
0xe9300000-0xe93fffff]
[    4.876152] pci 0000:02:03.0: BAR 15: assigned [mem 
0x8000c000000-0x8000fffffff 64bit pref]
[    4.876156] pci 0000:03:00.0: BAR 4: assigned [mem 
0x80000000000-0x800000fffff 64bit pref]
[    4.876161] pci 0000:03:00.0: BAR 6: assigned [mem 
0xe9000000-0xe90fffff pref]
[    4.876163] pci 0000:03:00.0: BAR 11: assigned [mem 
0x80000100000-0x80003cfffff 64bit pref]
[    4.876166] pci 0000:03:00.0: BAR 0: assigned [mem 
0x80003d00000-0x80003d1ffff 64bit pref]
[    4.876171] pci 0000:03:00.0: BAR 2: assigned [mem 
0x80003d20000-0x80003d27fff 64bit pref]
[    4.876175] pci 0000:03:00.0: BAR 9: assigned [mem 
0x80003d28000-0x80003f07fff 64bit pref]
[    4.876178] pci 0000:03:00.0: BAR 7: assigned [mem 
0x80003f08000-0x80003ff7fff 64bit pref]
[    4.876183] pci 0000:02:00.0: PCI bridge to [bus 03]
[    4.876185] pci 0000:02:00.0:   bridge window [mem 0xe9000000-0xe90fffff]
[    4.876188] pci 0000:02:00.0:   bridge window [mem 
0x80000000000-0x80003ffffff 64bit pref]
[    4.876192] pci 0000:04:00.0: BAR 4: assigned [mem 
0x80004000000-0x800040fffff 64bit pref]
[    4.876197] pci 0000:04:00.0: BAR 6: assigned [mem 
0xe9100000-0xe91fffff pref]
[    4.876199] pci 0000:04:00.0: BAR 11: assigned [mem 
0x80004100000-0x80007cfffff 64bit pref]
[    4.876202] pci 0000:04:00.0: BAR 0: assigned [mem 
0x80007d00000-0x80007d1ffff 64bit pref]
[    4.876206] pci 0000:04:00.0: BAR 2: assigned [mem 
0x80007d20000-0x80007d27fff 64bit pref]
[    4.876211] pci 0000:04:00.0: BAR 9: assigned [mem 
0x80007d28000-0x80007f07fff 64bit pref]
[    4.876214] pci 0000:04:00.0: BAR 7: assigned [mem 
0x80007f08000-0x80007ff7fff 64bit pref]
[    4.876218] pci 0000:02:01.0: PCI bridge to [bus 04]
[    4.876221] pci 0000:02:01.0:   bridge window [mem 0xe9100000-0xe91fffff]
[    4.876223] pci 0000:02:01.0:   bridge window [mem 
0x80004000000-0x80007ffffff 64bit pref]
[    4.876228] pci 0000:05:00.0: BAR 4: assigned [mem 
0x80008000000-0x800080fffff 64bit pref]
[    4.876232] pci 0000:05:00.0: BAR 6: assigned [mem 
0xe9200000-0xe92fffff pref]
[    4.876234] pci 0000:05:00.0: BAR 11: assigned [mem 
0x80008100000-0x8000bcfffff 64bit pref]
[    4.876237] pci 0000:05:00.0: BAR 0: assigned [mem 
0x8000bd00000-0x8000bd1ffff 64bit pref]
[    4.876242] pci 0000:05:00.0: BAR 2: assigned [mem 
0x8000bd20000-0x8000bd27fff 64bit pref]
[    4.876246] pci 0000:05:00.0: BAR 9: assigned [mem 
0x8000bd28000-0x8000bf07fff 64bit pref]
[    4.876249] pci 0000:05:00.0: BAR 7: assigned [mem 
0x8000bf08000-0x8000bff7fff 64bit pref]
[    4.876253] pci 0000:02:02.0: PCI bridge to [bus 05]
[    4.876256] pci 0000:02:02.0:   bridge window [mem 0xe9200000-0xe92fffff]
[    4.876258] pci 0000:02:02.0:   bridge window [mem 
0x80008000000-0x8000bffffff 64bit pref]
[    4.876263] pci 0000:06:00.0: BAR 4: assigned [mem 
0x8000c000000-0x8000c0fffff 64bit pref]
[    4.876267] pci 0000:06:00.0: BAR 6: assigned [mem 
0xe9300000-0xe93fffff pref]
[    4.876269] pci 0000:06:00.0: BAR 11: assigned [mem 
0x8000c100000-0x8000fcfffff 64bit pref]
[    4.876272] pci 0000:06:00.0: BAR 0: assigned [mem 
0x8000fd00000-0x8000fd1ffff 64bit pref]
[    4.876276] pci 0000:06:00.0: BAR 2: assigned [mem 
0x8000fd20000-0x8000fd27fff 64bit pref]
[    4.876281] pci 0000:06:00.0: BAR 9: assigned [mem 
0x8000fd28000-0x8000ff07fff 64bit pref]
[    4.876283] pci 0000:06:00.0: BAR 7: assigned [mem 
0x8000ff08000-0x8000fff7fff 64bit pref]
[    4.876287] pci 0000:02:03.0: PCI bridge to [bus 06]
[    4.876289] pci 0000:02:03.0:   bridge window [mem 0xe9300000-0xe93fffff]
[    4.876292] pci 0000:02:03.0:   bridge window [mem 
0x8000c000000-0x8000fffffff 64bit pref]
[    4.876295] pci 0000:01:00.0: PCI bridge to [bus 02-06]
[    4.876298] pci 0000:01:00.0:   bridge window [mem 0xe9000000-0xe93fffff]
[    4.876300] pci 0000:01:00.0:   bridge window [mem 
0x80000000000-0x8000fffffff 64bit pref]
[    4.876303] pci 0000:00:00.0: PCI bridge to [bus 01-06]
[    4.876305] pci 0000:00:00.0:   bridge window [mem 0xe9000000-0xe93fffff]
[    4.876307] pci 0000:00:00.0:   bridge window [mem 
0x80000000000-0x8000fffffff 64bit pref]
[    4.876309] pci 0000:00:08.0: PCI bridge to [bus 07]
[    4.876314] pci 0000:08:00.0: BAR 14: assigned [mem 
0xe9400000-0xe97fffff]
[    4.876315] pci 0000:08:00.0: BAR 15: assigned [mem 
0x80010000000-0x8001fffffff 64bit pref]
[    4.876319] pci 0000:09:00.0: BAR 14: assigned [mem 
0xe9400000-0xe94fffff]
[    4.876321] pci 0000:09:00.0: BAR 15: assigned [mem 
0x80010000000-0x80013ffffff 64bit pref]
[    4.876323] pci 0000:09:01.0: BAR 14: assigned [mem 
0xe9500000-0xe95fffff]
[    4.876324] pci 0000:09:01.0: BAR 15: assigned [mem 
0x80014000000-0x80017ffffff 64bit pref]
[    4.876326] pci 0000:09:02.0: BAR 14: assigned [mem 
0xe9600000-0xe96fffff]
[    4.876328] pci 0000:09:02.0: BAR 15: assigned [mem 
0x80018000000-0x8001bffffff 64bit pref]
[    4.876330] pci 0000:09:03.0: BAR 14: assigned [mem 
0xe9700000-0xe97fffff]
[    4.876331] pci 0000:09:03.0: BAR 15: assigned [mem 
0x8001c000000-0x8001fffffff 64bit pref]
[    4.876335] pci 0000:0a:00.0: BAR 4: assigned [mem 
0x80010000000-0x800100fffff 64bit pref]
[    4.876339] pci 0000:0a:00.0: BAR 6: assigned [mem 
0xe9400000-0xe94fffff pref]
[    4.876341] pci 0000:0a:00.0: BAR 11: assigned [mem 
0x80010100000-0x80013cfffff 64bit pref]
[    4.876344] pci 0000:0a:00.0: BAR 0: assigned [mem 
0x80013d00000-0x80013d1ffff 64bit pref]
[    4.876349] pci 0000:0a:00.0: BAR 2: assigned [mem 
0x80013d20000-0x80013d27fff 64bit pref]
[    4.876354] pci 0000:0a:00.0: BAR 9: assigned [mem 
0x80013d28000-0x80013f07fff 64bit pref]
[    4.876357] pci 0000:0a:00.0: BAR 7: assigned [mem 
0x80013f08000-0x80013ff7fff 64bit pref]
[    4.876361] pci 0000:09:00.0: PCI bridge to [bus 0a]
[    4.876363] pci 0000:09:00.0:   bridge window [mem 0xe9400000-0xe94fffff]
[    4.876366] pci 0000:09:00.0:   bridge window [mem 
0x80010000000-0x80013ffffff 64bit pref]
[    4.876370] pci 0000:0b:00.0: BAR 4: assigned [mem 
0x80014000000-0x800140fffff 64bit pref]
[    4.876375] pci 0000:0b:00.0: BAR 6: assigned [mem 
0xe9500000-0xe95fffff pref]
[    4.876377] pci 0000:0b:00.0: BAR 11: assigned [mem 
0x80014100000-0x80017cfffff 64bit pref]
[    4.876380] pci 0000:0b:00.0: BAR 0: assigned [mem 
0x80017d00000-0x80017d1ffff 64bit pref]
[    4.876385] pci 0000:0b:00.0: BAR 2: assigned [mem 
0x80017d20000-0x80017d27fff 64bit pref]
[    4.876389] pci 0000:0b:00.0: BAR 9: assigned [mem 
0x80017d28000-0x80017f07fff 64bit pref]
[    4.876393] pci 0000:0b:00.0: BAR 7: assigned [mem 
0x80017f08000-0x80017ff7fff 64bit pref]
[    4.876396] pci 0000:09:01.0: PCI bridge to [bus 0b]
[    4.876399] pci 0000:09:01.0:   bridge window [mem 0xe9500000-0xe95fffff]
[    4.876401] pci 0000:09:01.0:   bridge window [mem 
0x80014000000-0x80017ffffff 64bit pref]
[    4.876406] pci 0000:0c:00.0: BAR 4: assigned [mem 
0x80018000000-0x800180fffff 64bit pref]
[    4.876411] pci 0000:0c:00.0: BAR 6: assigned [mem 
0xe9600000-0xe96fffff pref]
[    4.876413] pci 0000:0c:00.0: BAR 11: assigned [mem 
0x80018100000-0x8001bcfffff 64bit pref]
[    4.876416] pci 0000:0c:00.0: BAR 0: assigned [mem 
0x8001bd00000-0x8001bd1ffff 64bit pref]
[    4.876421] pci 0000:0c:00.0: BAR 2: assigned [mem 
0x8001bd20000-0x8001bd27fff 64bit pref]
[    4.876426] pci 0000:0c:00.0: BAR 9: assigned [mem 
0x8001bd28000-0x8001bf07fff 64bit pref]
[    4.876429] pci 0000:0c:00.0: BAR 7: assigned [mem 
0x8001bf08000-0x8001bff7fff 64bit pref]
[    4.876432] pci 0000:09:02.0: PCI bridge to [bus 0c]
[    4.876435] pci 0000:09:02.0:   bridge window [mem 0xe9600000-0xe96fffff]
[    4.876438] pci 0000:09:02.0:   bridge window [mem 
0x80018000000-0x8001bffffff 64bit pref]
[    4.876442] pci 0000:0d:00.0: BAR 4: assigned [mem 
0x8001c000000-0x8001c0fffff 64bit pref]
[    4.876447] pci 0000:0d:00.0: BAR 6: assigned [mem 
0xe9700000-0xe97fffff pref]
[    4.876448] pci 0000:0d:00.0: BAR 11: assigned [mem 
0x8001c100000-0x8001fcfffff 64bit pref]
[    4.876451] pci 0000:0d:00.0: BAR 0: assigned [mem 
0x8001fd00000-0x8001fd1ffff 64bit pref]
[    4.876456] pci 0000:0d:00.0: BAR 2: assigned [mem 
0x8001fd20000-0x8001fd27fff 64bit pref]
[    4.876461] pci 0000:0d:00.0: BAR 9: assigned [mem 
0x8001fd28000-0x8001ff07fff 64bit pref]
[    4.876464] pci 0000:0d:00.0: BAR 7: assigned [mem 
0x8001ff08000-0x8001fff7fff 64bit pref]
[    4.876467] pci 0000:09:03.0: PCI bridge to [bus 0d]
[    4.876470] pci 0000:09:03.0:   bridge window [mem 0xe9700000-0xe97fffff]
[    4.876473] pci 0000:09:03.0:   bridge window [mem 
0x8001c000000-0x8001fffffff 64bit pref]
[    4.876476] pci 0000:08:00.0: PCI bridge to [bus 09-0d]
[    4.876479] pci 0000:08:00.0:   bridge window [mem 0xe9400000-0xe97fffff]
[    4.876481] pci 0000:08:00.0:   bridge window [mem 
0x80010000000-0x8001fffffff 64bit pref]
[    4.876484] pci 0000:00:0c.0: PCI bridge to [bus 08-0d]
[    4.876487] pci 0000:00:0c.0:   bridge window [mem 0xe9400000-0xe97fffff]
[    4.876489] pci 0000:00:0c.0:   bridge window [mem 
0x80010000000-0x8001fffffff 64bit pref]
[    4.876492] pci 0000:0e:00.0: BAR 0: assigned [mem 
0xe0000000-0xe3ffffff pref]
[    4.876496] pci 0000:0e:00.0: BAR 1: assigned [mem 0xe4000000-0xe40fffff]
[    4.876501] pci 0000:00:10.0: PCI bridge to [bus 0e]
[    4.876503] pci 0000:00:10.0:   bridge window [mem 0xe0000000-0xe5ffffff]
[    4.876506] pci 0000:0f:00.0: BAR 0: assigned [mem 
0xe6000000-0xe7ffffff pref]
[    4.876511] pci 0000:0f:00.0: BAR 1: assigned [mem 0xe8000000-0xe81fffff]
[    4.876516] pci 0000:00:11.0: PCI bridge to [bus 0f]
[    4.876518] pci 0000:00:11.0:   bridge window [mem 0xe6000000-0xe8ffffff]
[    4.876521] pci 0000:00:12.0: PCI bridge to [bus 10]
[    4.876525] pci_bus 0000:00: resource 4 [mem 
0x80000000000-0x83fffffffff pref window]
[    4.876527] pci_bus 0000:00: resource 5 [mem 0xe0000000-0xeffeffff 
window]
[    4.876528] pci_bus 0000:00: resource 6 [io  0x0000-0xffff window]
[    4.876530] pci_bus 0000:01: resource 1 [mem 0xe9000000-0xe93fffff]
[    4.876532] pci_bus 0000:01: resource 2 [mem 
0x80000000000-0x8000fffffff 64bit pref]
[    4.876533] pci_bus 0000:02: resource 1 [mem 0xe9000000-0xe93fffff]
[    4.876535] pci_bus 0000:02: resource 2 [mem 
0x80000000000-0x8000fffffff 64bit pref]
[    4.876537] pci_bus 0000:03: resource 1 [mem 0xe9000000-0xe90fffff]
[    4.876539] pci_bus 0000:03: resource 2 [mem 
0x80000000000-0x80003ffffff 64bit pref]
[    4.876540] pci_bus 0000:04: resource 1 [mem 0xe9100000-0xe91fffff]
[    4.876542] pci_bus 0000:04: resource 2 [mem 
0x80004000000-0x80007ffffff 64bit pref]
[    4.876544] pci_bus 0000:05: resource 1 [mem 0xe9200000-0xe92fffff]
[    4.876545] pci_bus 0000:05: resource 2 [mem 
0x80008000000-0x8000bffffff 64bit pref]
[    4.876547] pci_bus 0000:06: resource 1 [mem 0xe9300000-0xe93fffff]
[    4.876549] pci_bus 0000:06: resource 2 [mem 
0x8000c000000-0x8000fffffff 64bit pref]
[    4.876550] pci_bus 0000:08: resource 1 [mem 0xe9400000-0xe97fffff]
[    4.876552] pci_bus 0000:08: resource 2 [mem 
0x80010000000-0x8001fffffff 64bit pref]
[    4.876554] pci_bus 0000:09: resource 1 [mem 0xe9400000-0xe97fffff]
[    4.876555] pci_bus 0000:09: resource 2 [mem 
0x80010000000-0x8001fffffff 64bit pref]
[    4.876557] pci_bus 0000:0a: resource 1 [mem 0xe9400000-0xe94fffff]
[    4.876559] pci_bus 0000:0a: resource 2 [mem 
0x80010000000-0x80013ffffff 64bit pref]
[    4.876560] pci_bus 0000:0b: resource 1 [mem 0xe9500000-0xe95fffff]
[    4.876562] pci_bus 0000:0b: resource 2 [mem 
0x80014000000-0x80017ffffff 64bit pref]
[    4.876564] pci_bus 0000:0c: resource 1 [mem 0xe9600000-0xe96fffff]
[    4.876565] pci_bus 0000:0c: resource 2 [mem 
0x80018000000-0x8001bffffff 64bit pref]
[    4.876567] pci_bus 0000:0d: resource 1 [mem 0xe9700000-0xe97fffff]
[    4.876569] pci_bus 0000:0d: resource 2 [mem 
0x8001c000000-0x8001fffffff 64bit pref]
[    4.876570] pci_bus 0000:0e: resource 1 [mem 0xe0000000-0xe5ffffff]
[    4.876572] pci_bus 0000:0f: resource 1 [mem 0xe6000000-0xe8ffffff]
[    4.876624] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 7b])
[    4.876628] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    4.876633] acpi PNP0A08:01: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    4.877922] acpi PNP0A08:01: [Firmware Bug]: ECAM area [mem 
0xd7b00000-0xd7bfffff] not reserved in ACPI namespace
[    4.877937] acpi PNP0A08:01: ECAM at [mem 0xd7b00000-0xd7bfffff] for 
[bus 7b]
[    4.877975] PCI host bridge to bus 0000:7b
[    4.877977] pci_bus 0000:7b: root bus resource [mem 
0x148800000-0x148ffffff pref window]
[    4.877979] pci_bus 0000:7b: root bus resource [bus 7b]
[    4.877992] pci 0000:7b:00.0: [19e5:a122] type 00 class 0x088000
[    4.877999] pci 0000:7b:00.0: reg 0x18: [mem 0x00000000-0x00003fff 
64bit pref]
[    4.883085] pci 0000:7b:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.883128] pci 0000:7b:00.0: BAR 2: assigned [mem 
0x148800000-0x148803fff 64bit pref]
[    4.883131] pci_bus 0000:7b: resource 4 [mem 0x148800000-0x148ffffff 
pref window]
[    4.883165] ACPI: PCI Root Bridge [PCI2] (domain 0000 [bus 7a])
[    4.883169] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    4.883172] acpi PNP0A08:02: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    4.884436] acpi PNP0A08:02: [Firmware Bug]: ECAM area [mem 
0xd7a00000-0xd7afffff] not reserved in ACPI namespace
[    4.884451] acpi PNP0A08:02: ECAM at [mem 0xd7a00000-0xd7afffff] for 
[bus 7a]
[    4.884488] PCI host bridge to bus 0000:7a
[    4.884490] pci_bus 0000:7a: root bus resource [mem 
0x20c000000-0x20c1fffff pref window]
[    4.884492] pci_bus 0000:7a: root bus resource [bus 7a]
[    4.884500] pci 0000:7a:00.0: [19e5:a23b] type 00 class 0x0c0310
[    4.884505] pci 0000:7a:00.0: reg 0x10: [mem 0x20c100000-0x20c100fff 
64bit pref]
[    4.889567] pci 0000:7a:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.889579] pci 0000:7a:01.0: [19e5:a239] type 00 class 0x0c0320
[    4.889584] pci 0000:7a:01.0: reg 0x10: [mem 0x20c101000-0x20c101fff 
64bit pref]
[    4.894696] pci 0000:7a:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.894707] pci 0000:7a:02.0: [19e5:a238] type 00 class 0x0c0330
[    4.894712] pci 0000:7a:02.0: reg 0x10: [mem 0x20c000000-0x20c0fffff 
64bit pref]
[    4.899790] pci 0000:7a:02.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.899828] pci 0000:7a:02.0: BAR 0: assigned [mem 
0x20c000000-0x20c0fffff 64bit pref]
[    4.899831] pci 0000:7a:00.0: BAR 0: assigned [mem 
0x20c100000-0x20c100fff 64bit pref]
[    4.899834] pci 0000:7a:01.0: BAR 0: assigned [mem 
0x20c101000-0x20c101fff 64bit pref]
[    4.899838] pci_bus 0000:7a: resource 4 [mem 0x20c000000-0x20c1fffff 
pref window]
[    4.899873] ACPI: PCI Root Bridge [PCI3] (domain 0000 [bus 78-79])
[    4.899876] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    4.899880] acpi PNP0A08:03: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    4.901143] acpi PNP0A08:03: [Firmware Bug]: ECAM area [mem 
0xd7800000-0xd79fffff] not reserved in ACPI namespace
[    4.901150] acpi PNP0A08:03: ECAM at [mem 0xd7800000-0xd79fffff] for 
[bus 78-79]
[    4.901205] PCI host bridge to bus 0000:78
[    4.901207] pci_bus 0000:78: root bus resource [mem 
0x208000000-0x208bfffff pref window]
[    4.901209] pci_bus 0000:78: root bus resource [bus 78-79]
[    4.901214] pci 0000:78:00.0: [19e5:a121] type 01 class 0x060400
[    4.901223] pci 0000:78:00.0: enabling Extended Tags
[    4.906330] pci 0000:78:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.906339] pci 0000:78:01.0: [19e5:a25a] type 00 class 0x010400
[    4.906346] pci 0000:78:01.0: reg 0x18: [mem 0x208800000-0x208bfffff 
64bit pref]
[    4.911429] pci 0000:78:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.911488] pci 0000:79:00.0: [19e5:a258] type 00 class 0x100000
[    4.911495] pci 0000:79:00.0: reg 0x18: [mem 0x208000000-0x2083fffff 
64bit pref]
[    4.911516] pci 0000:79:00.0: reg 0x22c: [mem 0x208400000-0x20840ffff 
64bit pref]
[    4.911518] pci 0000:79:00.0: VF(n) BAR2 space: [mem 
0x208400000-0x2087effff 64bit pref] (contains BAR2 for 63 VFs)
[    4.916648] pci 0000:79:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.916663] pci 0000:78:00.0: bridge window [mem 
0x00400000-0x007fffff 64bit pref] to [bus 79] add_size 400000 add_align 
400000
[    4.916667] pci 0000:78:00.0: BAR 15: assigned [mem 
0x208000000-0x2087fffff 64bit pref]
[    4.916668] pci 0000:78:01.0: BAR 2: assigned [mem 
0x208800000-0x208bfffff 64bit pref]
[    4.916672] pci 0000:79:00.0: BAR 2: assigned [mem 
0x208000000-0x2083fffff 64bit pref]
[    4.916675] pci 0000:79:00.0: BAR 9: assigned [mem 
0x208400000-0x2087effff 64bit pref]
[    4.916677] pci 0000:78:00.0: PCI bridge to [bus 79]
[    4.916680] pci 0000:78:00.0:   bridge window [mem 
0x208000000-0x2087fffff 64bit pref]
[    4.916682] pci_bus 0000:78: resource 4 [mem 0x208000000-0x208bfffff 
pref window]
[    4.916684] pci_bus 0000:79: resource 2 [mem 0x208000000-0x2087fffff 
64bit pref]
[    4.916722] ACPI: PCI Root Bridge [PCI4] (domain 0000 [bus 7c-7d])
[    4.916726] acpi PNP0A08:04: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    4.916729] acpi PNP0A08:04: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    4.917999] acpi PNP0A08:04: [Firmware Bug]: ECAM area [mem 
0xd7c00000-0xd7dfffff] not reserved in ACPI namespace
[    4.918006] acpi PNP0A08:04: ECAM at [mem 0xd7c00000-0xd7dfffff] for 
[bus 7c-7d]
[    4.918043] PCI host bridge to bus 0000:7c
[    4.918046] pci_bus 0000:7c: root bus resource [mem 
0x120000000-0x13fffffff pref window]
[    4.918047] pci_bus 0000:7c: root bus resource [bus 7c-7d]
[    4.918060] pci 0000:7c:00.0: [19e5:a121] type 01 class 0x060400
[    4.918068] pci 0000:7c:00.0: enabling Extended Tags
[    4.923150] pci 0000:7c:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.923202] pci 0000:7d:00.0: [19e5:a222] type 00 class 0x020000
[    4.923208] pci 0000:7d:00.0: reg 0x10: [mem 0x1210f0000-0x1210fffff 
64bit pref]
[    4.923211] pci 0000:7d:00.0: reg 0x18: [mem 0x120f00000-0x120ffffff 
64bit pref]
[    4.923231] pci 0000:7d:00.0: reg 0x224: [mem 0x1210c0000-0x1210cffff 
64bit pref]
[    4.923233] pci 0000:7d:00.0: VF(n) BAR0 space: [mem 
0x1210c0000-0x1210effff 64bit pref] (contains BAR0 for 3 VFs)
[    4.923237] pci 0000:7d:00.0: reg 0x22c: [mem 0x120c00000-0x120cfffff 
64bit pref]
[    4.923239] pci 0000:7d:00.0: VF(n) BAR2 space: [mem 
0x120c00000-0x120efffff 64bit pref] (contains BAR2 for 3 VFs)
[    4.928291] pci 0000:7d:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.928302] pci 0000:7d:00.1: [19e5:a221] type 00 class 0x020000
[    4.928307] pci 0000:7d:00.1: reg 0x10: [mem 0x1210b0000-0x1210bffff 
64bit pref]
[    4.928311] pci 0000:7d:00.1: reg 0x18: [mem 0x120b00000-0x120bfffff 
64bit pref]
[    4.928329] pci 0000:7d:00.1: reg 0x224: [mem 0x121080000-0x12108ffff 
64bit pref]
[    4.928331] pci 0000:7d:00.1: VF(n) BAR0 space: [mem 
0x121080000-0x1210affff 64bit pref] (contains BAR0 for 3 VFs)
[    4.928334] pci 0000:7d:00.1: reg 0x22c: [mem 0x120800000-0x1208fffff 
64bit pref]
[    4.928336] pci 0000:7d:00.1: VF(n) BAR2 space: [mem 
0x120800000-0x120afffff 64bit pref] (contains BAR2 for 3 VFs)
[    4.933422] pci 0000:7d:00.1: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.933433] pci 0000:7d:00.2: [19e5:a222] type 00 class 0x020000
[    4.933438] pci 0000:7d:00.2: reg 0x10: [mem 0x121070000-0x12107ffff 
64bit pref]
[    4.933441] pci 0000:7d:00.2: reg 0x18: [mem 0x120700000-0x1207fffff 
64bit pref]
[    4.933459] pci 0000:7d:00.2: reg 0x224: [mem 0x121040000-0x12104ffff 
64bit pref]
[    4.933461] pci 0000:7d:00.2: VF(n) BAR0 space: [mem 
0x121040000-0x12106ffff 64bit pref] (contains BAR0 for 3 VFs)
[    4.933465] pci 0000:7d:00.2: reg 0x22c: [mem 0x120400000-0x1204fffff 
64bit pref]
[    4.933466] pci 0000:7d:00.2: VF(n) BAR2 space: [mem 
0x120400000-0x1206fffff 64bit pref] (contains BAR2 for 3 VFs)
[    4.938516] pci 0000:7d:00.2: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.938527] pci 0000:7d:00.3: [19e5:a221] type 00 class 0x020000
[    4.938533] pci 0000:7d:00.3: reg 0x10: [mem 0x121030000-0x12103ffff 
64bit pref]
[    4.938536] pci 0000:7d:00.3: reg 0x18: [mem 0x120300000-0x1203fffff 
64bit pref]
[    4.938554] pci 0000:7d:00.3: reg 0x224: [mem 0x121000000-0x12100ffff 
64bit pref]
[    4.938556] pci 0000:7d:00.3: VF(n) BAR0 space: [mem 
0x121000000-0x12102ffff 64bit pref] (contains BAR0 for 3 VFs)
[    4.938559] pci 0000:7d:00.3: reg 0x22c: [mem 0x120000000-0x1200fffff 
64bit pref]
[    4.938561] pci 0000:7d:00.3: VF(n) BAR2 space: [mem 
0x120000000-0x1202fffff 64bit pref] (contains BAR2 for 3 VFs)
[    4.943642] pci 0000:7d:00.3: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.943660] pci 0000:7c:00.0: bridge window [mem 
0x00100000-0x005fffff 64bit pref] to [bus 7d] add_size c00000 add_align 
100000
[    4.943663] pci 0000:7c:00.0: BAR 15: assigned [mem 
0x120000000-0x1210fffff 64bit pref]
[    4.943668] pci 0000:7d:00.0: BAR 2: assigned [mem 
0x120000000-0x1200fffff 64bit pref]
[    4.943671] pci 0000:7d:00.0: BAR 9: assigned [mem 
0x120100000-0x1203fffff 64bit pref]
[    4.943673] pci 0000:7d:00.1: BAR 2: assigned [mem 
0x120400000-0x1204fffff 64bit pref]
[    4.943676] pci 0000:7d:00.1: BAR 9: assigned [mem 
0x120500000-0x1207fffff 64bit pref]
[    4.943678] pci 0000:7d:00.2: BAR 2: assigned [mem 
0x120800000-0x1208fffff 64bit pref]
[    4.943681] pci 0000:7d:00.2: BAR 9: assigned [mem 
0x120900000-0x120bfffff 64bit pref]
[    4.943683] pci 0000:7d:00.3: BAR 2: assigned [mem 
0x120c00000-0x120cfffff 64bit pref]
[    4.943686] pci 0000:7d:00.3: BAR 9: assigned [mem 
0x120d00000-0x120ffffff 64bit pref]
[    4.943688] pci 0000:7d:00.0: BAR 0: assigned [mem 
0x121000000-0x12100ffff 64bit pref]
[    4.943691] pci 0000:7d:00.0: BAR 7: assigned [mem 
0x121010000-0x12103ffff 64bit pref]
[    4.943693] pci 0000:7d:00.1: BAR 0: assigned [mem 
0x121040000-0x12104ffff 64bit pref]
[    4.943696] pci 0000:7d:00.1: BAR 7: assigned [mem 
0x121050000-0x12107ffff 64bit pref]
[    4.943698] pci 0000:7d:00.2: BAR 0: assigned [mem 
0x121080000-0x12108ffff 64bit pref]
[    4.943701] pci 0000:7d:00.2: BAR 7: assigned [mem 
0x121090000-0x1210bffff 64bit pref]
[    4.943703] pci 0000:7d:00.3: BAR 0: assigned [mem 
0x1210c0000-0x1210cffff 64bit pref]
[    4.943706] pci 0000:7d:00.3: BAR 7: assigned [mem 
0x1210d0000-0x1210fffff 64bit pref]
[    4.943709] pci 0000:7c:00.0: PCI bridge to [bus 7d]
[    4.943712] pci 0000:7c:00.0:   bridge window [mem 
0x120000000-0x1210fffff 64bit pref]
[    4.943714] pci_bus 0000:7c: resource 4 [mem 0x120000000-0x13fffffff 
pref window]
[    4.943716] pci_bus 0000:7d: resource 2 [mem 0x120000000-0x1210fffff 
64bit pref]
[    4.943755] ACPI: PCI Root Bridge [PCI5] (domain 0000 [bus 74-76])
[    4.943759] acpi PNP0A08:05: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    4.943762] acpi PNP0A08:05: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    4.945032] acpi PNP0A08:05: [Firmware Bug]: ECAM area [mem 
0xd7400000-0xd76fffff] not reserved in ACPI namespace
[    4.945046] acpi PNP0A08:05: ECAM at [mem 0xd7400000-0xd76fffff] for 
[bus 74-76]
[    4.945114] PCI host bridge to bus 0000:74
[    4.945117] pci_bus 0000:74: root bus resource [mem 
0x141000000-0x141ffffff pref window]
[    4.945118] pci_bus 0000:74: root bus resource [mem 
0x144000000-0x145ffffff pref window]
[    4.945120] pci_bus 0000:74: root bus resource [mem 
0xa2000000-0xa2ffffff window]
[    4.945122] pci_bus 0000:74: root bus resource [bus 74-76]
[    4.945128] pci 0000:74:00.0: [19e5:a121] type 01 class 0x060400
[    4.945136] pci 0000:74:00.0: enabling Extended Tags
[    4.950209] pci 0000:74:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.950218] pci 0000:74:01.0: [19e5:a121] type 01 class 0x060400
[    4.950226] pci 0000:74:01.0: enabling Extended Tags
[    4.955338] pci 0000:74:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.955346] pci 0000:74:02.0: [19e5:a230] type 00 class 0x010700
[    4.955354] pci 0000:74:02.0: reg 0x24: [mem 0xa2008000-0xa200ffff]
[    4.960436] pci 0000:74:02.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.960446] pci 0000:74:03.0: [19e5:a235] type 00 class 0x010601
[    4.960456] pci 0000:74:03.0: reg 0x24: [mem 0xa2010000-0xa2010fff]
[    4.965558] pci 0000:74:03.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.965567] pci 0000:74:04.0: [19e5:a230] type 00 class 0x010700
[    4.965575] pci 0000:74:04.0: reg 0x24: [mem 0xa2000000-0xa2007fff]
[    4.970657] pci 0000:74:04.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.970710] pci 0000:75:00.0: [19e5:a250] type 00 class 0x120000
[    4.970717] pci 0000:75:00.0: reg 0x18: [mem 0x144000000-0x1443fffff 
64bit pref]
[    4.970738] pci 0000:75:00.0: reg 0x22c: [mem 0x144400000-0x14440ffff 
64bit pref]
[    4.970741] pci 0000:75:00.0: VF(n) BAR2 space: [mem 
0x144400000-0x1447effff 64bit pref] (contains BAR2 for 63 VFs)
[    4.975864] pci 0000:75:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.975901] pci 0000:76:00.0: [19e5:a255] type 00 class 0x100000
[    4.975908] pci 0000:76:00.0: reg 0x18: [mem 0x144800000-0x144bfffff 
64bit pref]
[    4.975929] pci 0000:76:00.0: reg 0x22c: [mem 0x144c00000-0x144c0ffff 
64bit pref]
[    4.975931] pci 0000:76:00.0: VF(n) BAR2 space: [mem 
0x144c00000-0x144feffff 64bit pref] (contains BAR2 for 63 VFs)
[    4.981023] pci 0000:76:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.981040] pci 0000:74:00.0: bridge window [mem 
0x00400000-0x007fffff 64bit pref] to [bus 75] add_size 400000 add_align 
400000
[    4.981042] pci 0000:74:01.0: bridge window [mem 
0x00400000-0x007fffff 64bit pref] to [bus 76] add_size 400000 add_align 
400000
[    4.981047] pci 0000:74:00.0: BAR 15: assigned [mem 
0x141000000-0x1417fffff 64bit pref]
[    4.981049] pci 0000:74:01.0: BAR 15: assigned [mem 
0x141800000-0x141ffffff 64bit pref]
[    4.981051] pci 0000:74:02.0: BAR 5: assigned [mem 0xa2000000-0xa2007fff]
[    4.981053] pci 0000:74:04.0: BAR 5: assigned [mem 0xa2008000-0xa200ffff]
[    4.981055] pci 0000:74:03.0: BAR 5: assigned [mem 0xa2010000-0xa2010fff]
[    4.981058] pci 0000:75:00.0: BAR 2: assigned [mem 
0x141000000-0x1413fffff 64bit pref]
[    4.981061] pci 0000:75:00.0: BAR 9: assigned [mem 
0x141400000-0x1417effff 64bit pref]
[    4.981063] pci 0000:74:00.0: PCI bridge to [bus 75]
[    4.981066] pci 0000:74:00.0:   bridge window [mem 
0x141000000-0x1417fffff 64bit pref]
[    4.981069] pci 0000:76:00.0: BAR 2: assigned [mem 
0x141800000-0x141bfffff 64bit pref]
[    4.981072] pci 0000:76:00.0: BAR 9: assigned [mem 
0x141c00000-0x141feffff 64bit pref]
[    4.981074] pci 0000:74:01.0: PCI bridge to [bus 76]
[    4.981077] pci 0000:74:01.0:   bridge window [mem 
0x141800000-0x141ffffff 64bit pref]
[    4.981080] pci_bus 0000:74: resource 4 [mem 0x141000000-0x141ffffff 
pref window]
[    4.981081] pci_bus 0000:74: resource 5 [mem 0x144000000-0x145ffffff 
pref window]
[    4.981083] pci_bus 0000:74: resource 6 [mem 0xa2000000-0xa2ffffff 
window]
[    4.981085] pci_bus 0000:75: resource 2 [mem 0x141000000-0x1417fffff 
64bit pref]
[    4.981086] pci_bus 0000:76: resource 2 [mem 0x141800000-0x141ffffff 
64bit pref]
[    4.981144] ACPI: PCI Root Bridge [PCI6] (domain 0000 [bus 80-9f])
[    4.981148] acpi PNP0A08:06: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    4.981226] acpi PNP0A08:06: _OSC: platform does not support [LTR]
[    4.981296] acpi PNP0A08:06: _OSC: OS now controls [PME AER 
PCIeCapability]
[    4.982590] acpi PNP0A08:06: [Firmware Bug]: ECAM area [mem 
0xd8000000-0xd9ffffff] not reserved in ACPI namespace
[    4.982598] acpi PNP0A08:06: ECAM at [mem 0xd8000000-0xd9ffffff] for 
[bus 80-9f]
[    4.982614] Remapped I/O 0x00000000ffff0000 to [io 0x10000-0x1ffff 
window]
[    4.982657] PCI host bridge to bus 0000:80
[    4.982659] pci_bus 0000:80: root bus resource [mem 
0x280000000000-0x283fffffffff pref window]
[    4.982661] pci_bus 0000:80: root bus resource [mem 
0xf0000000-0xfffeffff window]
[    4.982663] pci_bus 0000:80: root bus resource [io 0x10000-0x1ffff 
window] (bus address [0x0000-0xffff])
[    4.982665] pci_bus 0000:80: root bus resource [bus 80-9f]
[    4.982696] pci 0000:80:00.0: [19e5:a120] type 01 class 0x060400
[    4.982756] pci 0000:80:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.987823] pci 0000:80:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.987842] pci 0000:80:04.0: [19e5:a120] type 01 class 0x060400
[    4.987899] pci 0000:80:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.992984] pci 0000:80:04.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.992998] pci 0000:80:08.0: [19e5:a120] type 01 class 0x060400
[    4.993053] pci 0000:80:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[    4.998111] pci 0000:80:08.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    4.998125] pci 0000:80:0c.0: [19e5:a120] type 01 class 0x060400
[    4.998179] pci 0000:80:0c.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.003265] pci 0000:80:0c.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.003280] pci 0000:80:10.0: [19e5:a120] type 01 class 0x060400
[    5.003334] pci 0000:80:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.008392] pci 0000:80:10.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.008524] pci 0000:85:00.0: [19e5:371e] type 01 class 0x060400
[    5.008596] pci 0000:85:00.0: supports D1 D2
[    5.008598] pci 0000:85:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.008614] pci 0000:85:00.0: 63.008 Gb/s available PCIe bandwidth, 
limited by 8 GT/s x8 link at 0000:80:10.0 (capable of 126.016 Gb/s with 
8 GT/s x16 link)
[    5.013690] pci 0000:85:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.013732] pci 0000:86:00.0: [19e5:371e] type 01 class 0x060400
[    5.013808] pci 0000:86:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.018869] pci 0000:86:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.018881] pci 0000:86:01.0: [19e5:371e] type 01 class 0x060400
[    5.018956] pci 0000:86:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.024052] pci 0000:86:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.024065] pci 0000:86:02.0: [19e5:371e] type 01 class 0x060400
[    5.024140] pci 0000:86:02.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.029201] pci 0000:86:02.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.029214] pci 0000:86:03.0: [19e5:371e] type 01 class 0x060400
[    5.029288] pci 0000:86:03.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.034374] pci 0000:86:03.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.034443] pci 0000:87:00.0: [19e5:1822] type 00 class 0x020000
[    5.034458] pci 0000:87:00.0: reg 0x10: [mem 
0x28000fd00000-0x28000fd1ffff 64bit pref]
[    5.034464] pci 0000:87:00.0: reg 0x18: [mem 
0x28000ff00000-0x28000ff07fff 64bit pref]
[    5.034470] pci 0000:87:00.0: reg 0x20: [mem 
0x28000fc00000-0x28000fcfffff 64bit pref]
[    5.034474] pci 0000:87:00.0: reg 0x30: [mem 0xf0300000-0xf03fffff pref]
[    5.034540] pci 0000:87:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.034558] pci 0000:87:00.0: reg 0x224: [mem 
0x28000ff08000-0x28000ff0bfff 64bit pref]
[    5.034560] pci 0000:87:00.0: VF(n) BAR0 space: [mem 
0x28000ff08000-0x28000fff7fff 64bit pref] (contains BAR0 for 60 VFs)
[    5.034566] pci 0000:87:00.0: reg 0x22c: [mem 
0x28000fd20000-0x28000fd27fff 64bit pref]
[    5.034568] pci 0000:87:00.0: VF(n) BAR2 space: [mem 
0x28000fd20000-0x28000fefffff 64bit pref] (contains BAR2 for 60 VFs)
[    5.034574] pci 0000:87:00.0: reg 0x234: [mem 
0x28000c000000-0x28000c0fffff 64bit pref]
[    5.034576] pci 0000:87:00.0: VF(n) BAR4 space: [mem 
0x28000c000000-0x28000fbfffff 64bit pref] (contains BAR4 for 60 VFs)
[    5.034676] pci 0000:87:00.0: 63.008 Gb/s available PCIe bandwidth, 
limited by 8 GT/s x8 link at 0000:80:10.0 (capable of 126.016 Gb/s with 
8 GT/s x16 link)
[    5.039725] pci 0000:87:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.039773] pci 0000:88:00.0: [19e5:1822] type 00 class 0x020000
[    5.039788] pci 0000:88:00.0: reg 0x10: [mem 
0x28000bd00000-0x28000bd1ffff 64bit pref]
[    5.039794] pci 0000:88:00.0: reg 0x18: [mem 
0x28000bf00000-0x28000bf07fff 64bit pref]
[    5.039800] pci 0000:88:00.0: reg 0x20: [mem 
0x28000bc00000-0x28000bcfffff 64bit pref]
[    5.039804] pci 0000:88:00.0: reg 0x30: [mem 0xf0200000-0xf02fffff pref]
[    5.039871] pci 0000:88:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.039889] pci 0000:88:00.0: reg 0x224: [mem 
0x28000bf08000-0x28000bf0bfff 64bit pref]
[    5.039891] pci 0000:88:00.0: VF(n) BAR0 space: [mem 
0x28000bf08000-0x28000bff7fff 64bit pref] (contains BAR0 for 60 VFs)
[    5.039897] pci 0000:88:00.0: reg 0x22c: [mem 
0x28000bd20000-0x28000bd27fff 64bit pref]
[    5.039899] pci 0000:88:00.0: VF(n) BAR2 space: [mem 
0x28000bd20000-0x28000befffff 64bit pref] (contains BAR2 for 60 VFs)
[    5.039905] pci 0000:88:00.0: reg 0x234: [mem 
0x280008000000-0x2800080fffff 64bit pref]
[    5.039907] pci 0000:88:00.0: VF(n) BAR4 space: [mem 
0x280008000000-0x28000bbfffff 64bit pref] (contains BAR4 for 60 VFs)
[    5.040007] pci 0000:88:00.0: 63.008 Gb/s available PCIe bandwidth, 
limited by 8 GT/s x8 link at 0000:80:10.0 (capable of 126.016 Gb/s with 
8 GT/s x16 link)
[    5.045088] pci 0000:88:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.045132] pci 0000:89:00.0: [19e5:1822] type 00 class 0x020000
[    5.045147] pci 0000:89:00.0: reg 0x10: [mem 
0x280007d00000-0x280007d1ffff 64bit pref]
[    5.045153] pci 0000:89:00.0: reg 0x18: [mem 
0x280007f00000-0x280007f07fff 64bit pref]
[    5.045160] pci 0000:89:00.0: reg 0x20: [mem 
0x280007c00000-0x280007cfffff 64bit pref]
[    5.045164] pci 0000:89:00.0: reg 0x30: [mem 0xf0100000-0xf01fffff pref]
[    5.045231] pci 0000:89:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.045249] pci 0000:89:00.0: reg 0x224: [mem 
0x280007f08000-0x280007f0bfff 64bit pref]
[    5.045251] pci 0000:89:00.0: VF(n) BAR0 space: [mem 
0x280007f08000-0x280007ff7fff 64bit pref] (contains BAR0 for 60 VFs)
[    5.045257] pci 0000:89:00.0: reg 0x22c: [mem 
0x280007d20000-0x280007d27fff 64bit pref]
[    5.045259] pci 0000:89:00.0: VF(n) BAR2 space: [mem 
0x280007d20000-0x280007efffff 64bit pref] (contains BAR2 for 60 VFs)
[    5.045265] pci 0000:89:00.0: reg 0x234: [mem 
0x280004000000-0x2800040fffff 64bit pref]
[    5.045267] pci 0000:89:00.0: VF(n) BAR4 space: [mem 
0x280004000000-0x280007bfffff 64bit pref] (contains BAR4 for 60 VFs)
[    5.045367] pci 0000:89:00.0: 63.008 Gb/s available PCIe bandwidth, 
limited by 8 GT/s x8 link at 0000:80:10.0 (capable of 126.016 Gb/s with 
8 GT/s x16 link)
[    5.050415] pci 0000:89:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.050464] pci 0000:8a:00.0: [19e5:1822] type 00 class 0x020000
[    5.050479] pci 0000:8a:00.0: reg 0x10: [mem 
0x280003d00000-0x280003d1ffff 64bit pref]
[    5.050485] pci 0000:8a:00.0: reg 0x18: [mem 
0x280003f00000-0x280003f07fff 64bit pref]
[    5.050491] pci 0000:8a:00.0: reg 0x20: [mem 
0x280003c00000-0x280003cfffff 64bit pref]
[    5.050495] pci 0000:8a:00.0: reg 0x30: [mem 0xf0000000-0xf00fffff pref]
[    5.050561] pci 0000:8a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    5.050578] pci 0000:8a:00.0: reg 0x224: [mem 
0x280003f08000-0x280003f0bfff 64bit pref]
[    5.050580] pci 0000:8a:00.0: VF(n) BAR0 space: [mem 
0x280003f08000-0x280003ff7fff 64bit pref] (contains BAR0 for 60 VFs)
[    5.050586] pci 0000:8a:00.0: reg 0x22c: [mem 
0x280003d20000-0x280003d27fff 64bit pref]
[    5.050588] pci 0000:8a:00.0: VF(n) BAR2 space: [mem 
0x280003d20000-0x280003efffff 64bit pref] (contains BAR2 for 60 VFs)
[    5.050594] pci 0000:8a:00.0: reg 0x234: [mem 
0x280000000000-0x2800000fffff 64bit pref]
[    5.050596] pci 0000:8a:00.0: VF(n) BAR4 space: [mem 
0x280000000000-0x280003bfffff 64bit pref] (contains BAR4 for 60 VFs)
[    5.050696] pci 0000:8a:00.0: 63.008 Gb/s available PCIe bandwidth, 
limited by 8 GT/s x8 link at 0000:80:10.0 (capable of 126.016 Gb/s with 
8 GT/s x16 link)
[    5.055767] pci 0000:8a:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.055810] pci 0000:86:00.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 87] add_size 3e00000 add_align 
100000
[    5.055813] pci 0000:86:01.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 88] add_size 3e00000 add_align 
100000
[    5.055817] pci 0000:86:02.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 89] add_size 3e00000 add_align 
100000
[    5.055820] pci 0000:86:03.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 8a] add_size 3e00000 add_align 
100000
[    5.055823] pci 0000:85:00.0: bridge window [mem 
0x00100000-0x008fffff 64bit pref] to [bus 86-8a] add_size f800000 
add_align 100000
[    5.055825] pci 0000:80:10.0: bridge window [mem 
0x00100000-0x008fffff 64bit pref] to [bus 85-8a] add_size f800000 
add_align 100000
[    5.055829] pci 0000:80:10.0: BAR 14: assigned [mem 
0xf0000000-0xf03fffff]
[    5.055831] pci 0000:80:10.0: BAR 15: assigned [mem 
0x280000000000-0x28000fffffff 64bit pref]
[    5.055833] pci 0000:80:00.0: PCI bridge to [bus 81]
[    5.055837] pci 0000:80:04.0: PCI bridge to [bus 82]
[    5.055841] pci 0000:80:08.0: PCI bridge to [bus 83]
[    5.055845] pci 0000:80:0c.0: PCI bridge to [bus 84]
[    5.055849] pci 0000:85:00.0: BAR 14: assigned [mem 
0xf0000000-0xf03fffff]
[    5.055851] pci 0000:85:00.0: BAR 15: assigned [mem 
0x280000000000-0x28000fffffff 64bit pref]
[    5.055855] pci 0000:86:00.0: BAR 14: assigned [mem 
0xf0000000-0xf00fffff]
[    5.055857] pci 0000:86:00.0: BAR 15: assigned [mem 
0x280000000000-0x280003ffffff 64bit pref]
[    5.055859] pci 0000:86:01.0: BAR 14: assigned [mem 
0xf0100000-0xf01fffff]
[    5.055860] pci 0000:86:01.0: BAR 15: assigned [mem 
0x280004000000-0x280007ffffff 64bit pref]
[    5.055862] pci 0000:86:02.0: BAR 14: assigned [mem 
0xf0200000-0xf02fffff]
[    5.055864] pci 0000:86:02.0: BAR 15: assigned [mem 
0x280008000000-0x28000bffffff 64bit pref]
[    5.055866] pci 0000:86:03.0: BAR 14: assigned [mem 
0xf0300000-0xf03fffff]
[    5.055868] pci 0000:86:03.0: BAR 15: assigned [mem 
0x28000c000000-0x28000fffffff 64bit pref]
[    5.055871] pci 0000:87:00.0: BAR 4: assigned [mem 
0x280000000000-0x2800000fffff 64bit pref]
[    5.055876] pci 0000:87:00.0: BAR 6: assigned [mem 
0xf0000000-0xf00fffff pref]
[    5.055878] pci 0000:87:00.0: BAR 11: assigned [mem 
0x280000100000-0x280003cfffff 64bit pref]
[    5.055882] pci 0000:87:00.0: BAR 0: assigned [mem 
0x280003d00000-0x280003d1ffff 64bit pref]
[    5.055887] pci 0000:87:00.0: BAR 2: assigned [mem 
0x280003d20000-0x280003d27fff 64bit pref]
[    5.055892] pci 0000:87:00.0: BAR 9: assigned [mem 
0x280003d28000-0x280003f07fff 64bit pref]
[    5.055895] pci 0000:87:00.0: BAR 7: assigned [mem 
0x280003f08000-0x280003ff7fff 64bit pref]
[    5.055899] pci 0000:86:00.0: PCI bridge to [bus 87]
[    5.055902] pci 0000:86:00.0:   bridge window [mem 0xf0000000-0xf00fffff]
[    5.055905] pci 0000:86:00.0:   bridge window [mem 
0x280000000000-0x280003ffffff 64bit pref]
[    5.055909] pci 0000:88:00.0: BAR 4: assigned [mem 
0x280004000000-0x2800040fffff 64bit pref]
[    5.055915] pci 0000:88:00.0: BAR 6: assigned [mem 
0xf0100000-0xf01fffff pref]
[    5.055916] pci 0000:88:00.0: BAR 11: assigned [mem 
0x280004100000-0x280007cfffff 64bit pref]
[    5.055920] pci 0000:88:00.0: BAR 0: assigned [mem 
0x280007d00000-0x280007d1ffff 64bit pref]
[    5.055925] pci 0000:88:00.0: BAR 2: assigned [mem 
0x280007d20000-0x280007d27fff 64bit pref]
[    5.055930] pci 0000:88:00.0: BAR 9: assigned [mem 
0x280007d28000-0x280007f07fff 64bit pref]
[    5.055934] pci 0000:88:00.0: BAR 7: assigned [mem 
0x280007f08000-0x280007ff7fff 64bit pref]
[    5.055937] pci 0000:86:01.0: PCI bridge to [bus 88]
[    5.055940] pci 0000:86:01.0:   bridge window [mem 0xf0100000-0xf01fffff]
[    5.055943] pci 0000:86:01.0:   bridge window [mem 
0x280004000000-0x280007ffffff 64bit pref]
[    5.055948] pci 0000:89:00.0: BAR 4: assigned [mem 
0x280008000000-0x2800080fffff 64bit pref]
[    5.055953] pci 0000:89:00.0: BAR 6: assigned [mem 
0xf0200000-0xf02fffff pref]
[    5.055955] pci 0000:89:00.0: BAR 11: assigned [mem 
0x280008100000-0x28000bcfffff 64bit pref]
[    5.055958] pci 0000:89:00.0: BAR 0: assigned [mem 
0x28000bd00000-0x28000bd1ffff 64bit pref]
[    5.055963] pci 0000:89:00.0: BAR 2: assigned [mem 
0x28000bd20000-0x28000bd27fff 64bit pref]
[    5.055968] pci 0000:89:00.0: BAR 9: assigned [mem 
0x28000bd28000-0x28000bf07fff 64bit pref]
[    5.055971] pci 0000:89:00.0: BAR 7: assigned [mem 
0x28000bf08000-0x28000bff7fff 64bit pref]
[    5.055975] pci 0000:86:02.0: PCI bridge to [bus 89]
[    5.055978] pci 0000:86:02.0:   bridge window [mem 0xf0200000-0xf02fffff]
[    5.055981] pci 0000:86:02.0:   bridge window [mem 
0x280008000000-0x28000bffffff 64bit pref]
[    5.055985] pci 0000:8a:00.0: BAR 4: assigned [mem 
0x28000c000000-0x28000c0fffff 64bit pref]
[    5.055990] pci 0000:8a:00.0: BAR 6: assigned [mem 
0xf0300000-0xf03fffff pref]
[    5.055992] pci 0000:8a:00.0: BAR 11: assigned [mem 
0x28000c100000-0x28000fcfffff 64bit pref]
[    5.055995] pci 0000:8a:00.0: BAR 0: assigned [mem 
0x28000fd00000-0x28000fd1ffff 64bit pref]
[    5.056000] pci 0000:8a:00.0: BAR 2: assigned [mem 
0x28000fd20000-0x28000fd27fff 64bit pref]
[    5.056006] pci 0000:8a:00.0: BAR 9: assigned [mem 
0x28000fd28000-0x28000ff07fff 64bit pref]
[    5.056009] pci 0000:8a:00.0: BAR 7: assigned [mem 
0x28000ff08000-0x28000fff7fff 64bit pref]
[    5.056012] pci 0000:86:03.0: PCI bridge to [bus 8a]
[    5.056015] pci 0000:86:03.0:   bridge window [mem 0xf0300000-0xf03fffff]
[    5.056018] pci 0000:86:03.0:   bridge window [mem 
0x28000c000000-0x28000fffffff 64bit pref]
[    5.056021] pci 0000:85:00.0: PCI bridge to [bus 86-8a]
[    5.056024] pci 0000:85:00.0:   bridge window [mem 0xf0000000-0xf03fffff]
[    5.056027] pci 0000:85:00.0:   bridge window [mem 
0x280000000000-0x28000fffffff 64bit pref]
[    5.056030] pci 0000:80:10.0: PCI bridge to [bus 85-8a]
[    5.056032] pci 0000:80:10.0:   bridge window [mem 0xf0000000-0xf03fffff]
[    5.056034] pci 0000:80:10.0:   bridge window [mem 
0x280000000000-0x28000fffffff 64bit pref]
[    5.056037] pci_bus 0000:80: resource 4 [mem 
0x280000000000-0x283fffffffff pref window]
[    5.056039] pci_bus 0000:80: resource 5 [mem 0xf0000000-0xfffeffff 
window]
[    5.056040] pci_bus 0000:80: resource 6 [io  0x10000-0x1ffff window]
[    5.056042] pci_bus 0000:85: resource 1 [mem 0xf0000000-0xf03fffff]
[    5.056044] pci_bus 0000:85: resource 2 [mem 
0x280000000000-0x28000fffffff 64bit pref]
[    5.056046] pci_bus 0000:86: resource 1 [mem 0xf0000000-0xf03fffff]
[    5.056047] pci_bus 0000:86: resource 2 [mem 
0x280000000000-0x28000fffffff 64bit pref]
[    5.056049] pci_bus 0000:87: resource 1 [mem 0xf0000000-0xf00fffff]
[    5.056051] pci_bus 0000:87: resource 2 [mem 
0x280000000000-0x280003ffffff 64bit pref]
[    5.056052] pci_bus 0000:88: resource 1 [mem 0xf0100000-0xf01fffff]
[    5.056054] pci_bus 0000:88: resource 2 [mem 
0x280004000000-0x280007ffffff 64bit pref]
[    5.056056] pci_bus 0000:89: resource 1 [mem 0xf0200000-0xf02fffff]
[    5.056057] pci_bus 0000:89: resource 2 [mem 
0x280008000000-0x28000bffffff 64bit pref]
[    5.056059] pci_bus 0000:8a: resource 1 [mem 0xf0300000-0xf03fffff]
[    5.056060] pci_bus 0000:8a: resource 2 [mem 
0x28000c000000-0x28000fffffff 64bit pref]
[    5.056116] ACPI: PCI Root Bridge [PCI7] (domain 0000 [bus bb])
[    5.056119] acpi PNP0A08:07: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    5.056123] acpi PNP0A08:07: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    5.057383] acpi PNP0A08:07: [Firmware Bug]: ECAM area [mem 
0xdbb00000-0xdbbfffff] not reserved in ACPI namespace
[    5.057399] acpi PNP0A08:07: ECAM at [mem 0xdbb00000-0xdbbfffff] for 
[bus bb]
[    5.057440] PCI host bridge to bus 0000:bb
[    5.057442] pci_bus 0000:bb: root bus resource [mem 
0x200148800000-0x200148ffffff pref window]
[    5.057443] pci_bus 0000:bb: root bus resource [bus bb]
[    5.057456] pci 0000:bb:00.0: [19e5:a122] type 00 class 0x088000
[    5.057465] pci 0000:bb:00.0: reg 0x18: [mem 0x00000000-0x00003fff 
64bit pref]
[    5.062552] pci 0000:bb:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.062594] pci 0000:bb:00.0: BAR 2: assigned [mem 
0x200148800000-0x200148803fff 64bit pref]
[    5.062597] pci_bus 0000:bb: resource 4 [mem 
0x200148800000-0x200148ffffff pref window]
[    5.062644] ACPI: PCI Root Bridge [PCI8] (domain 0000 [bus ba])
[    5.062648] acpi PNP0A08:08: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    5.062652] acpi PNP0A08:08: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    5.063918] acpi PNP0A08:08: [Firmware Bug]: ECAM area [mem 
0xdba00000-0xdbafffff] not reserved in ACPI namespace
[    5.063932] acpi PNP0A08:08: ECAM at [mem 0xdba00000-0xdbafffff] for 
[bus ba]
[    5.063973] PCI host bridge to bus 0000:ba
[    5.063976] pci_bus 0000:ba: root bus resource [mem 
0x20020c000000-0x20020c1fffff pref window]
[    5.063977] pci_bus 0000:ba: root bus resource [bus ba]
[    5.064016] pci_bus 0000:ba: resource 4 [mem 
0x20020c000000-0x20020c1fffff pref window]
[    5.064055] ACPI: PCI Root Bridge [PCI9] (domain 0000 [bus b8-b9])
[    5.064058] acpi PNP0A08:09: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    5.064061] acpi PNP0A08:09: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    5.065316] acpi PNP0A08:09: [Firmware Bug]: ECAM area [mem 
0xdb800000-0xdb9fffff] not reserved in ACPI namespace
[    5.065322] acpi PNP0A08:09: ECAM at [mem 0xdb800000-0xdb9fffff] for 
[bus b8-b9]
[    5.065373] PCI host bridge to bus 0000:b8
[    5.065375] pci_bus 0000:b8: root bus resource [mem 
0x200208000000-0x200208bfffff pref window]
[    5.065377] pci_bus 0000:b8: root bus resource [bus b8-b9]
[    5.065383] pci 0000:b8:00.0: [19e5:a121] type 01 class 0x060400
[    5.065394] pci 0000:b8:00.0: enabling Extended Tags
[    5.070473] pci 0000:b8:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.070483] pci 0000:b8:01.0: [19e5:a25a] type 00 class 0x010400
[    5.070491] pci 0000:b8:01.0: reg 0x18: [mem 
0x200208800000-0x200208bfffff 64bit pref]
[    5.075604] pci 0000:b8:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.075666] pci 0000:b9:00.0: [19e5:a258] type 00 class 0x100000
[    5.075675] pci 0000:b9:00.0: reg 0x18: [mem 
0x200208000000-0x2002083fffff 64bit pref]
[    5.075702] pci 0000:b9:00.0: reg 0x22c: [mem 
0x200208400000-0x20020840ffff 64bit pref]
[    5.075705] pci 0000:b9:00.0: VF(n) BAR2 space: [mem 
0x200208400000-0x2002087effff 64bit pref] (contains BAR2 for 63 VFs)
[    5.080823] pci 0000:b9:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.080839] pci 0000:b8:00.0: bridge window [mem 
0x00400000-0x007fffff 64bit pref] to [bus b9] add_size 400000 add_align 
400000
[    5.080843] pci 0000:b8:00.0: BAR 15: assigned [mem 
0x200208000000-0x2002087fffff 64bit pref]
[    5.080845] pci 0000:b8:01.0: BAR 2: assigned [mem 
0x200208800000-0x200208bfffff 64bit pref]
[    5.080848] pci 0000:b9:00.0: BAR 2: assigned [mem 
0x200208000000-0x2002083fffff 64bit pref]
[    5.080852] pci 0000:b9:00.0: BAR 9: assigned [mem 
0x200208400000-0x2002087effff 64bit pref]
[    5.080854] pci 0000:b8:00.0: PCI bridge to [bus b9]
[    5.080857] pci 0000:b8:00.0:   bridge window [mem 
0x200208000000-0x2002087fffff 64bit pref]
[    5.080860] pci_bus 0000:b8: resource 4 [mem 
0x200208000000-0x200208bfffff pref window]
[    5.080862] pci_bus 0000:b9: resource 2 [mem 
0x200208000000-0x2002087fffff 64bit pref]
[    5.080912] ACPI: PCI Root Bridge [PCIA] (domain 0000 [bus bc-bd])
[    5.080916] acpi PNP0A08:0a: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    5.080919] acpi PNP0A08:0a: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    5.082210] acpi PNP0A08:0a: [Firmware Bug]: ECAM area [mem 
0xdbc00000-0xdbdfffff] not reserved in ACPI namespace
[    5.082216] acpi PNP0A08:0a: ECAM at [mem 0xdbc00000-0xdbdfffff] for 
[bus bc-bd]
[    5.082255] PCI host bridge to bus 0000:bc
[    5.082257] pci_bus 0000:bc: root bus resource [mem 
0x200120000000-0x20013fffffff pref window]
[    5.082259] pci_bus 0000:bc: root bus resource [bus bc-bd]
[    5.082272] pci 0000:bc:00.0: [19e5:a121] type 01 class 0x060400
[    5.082282] pci 0000:bc:00.0: enabling Extended Tags
[    5.087344] pci 0000:bc:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.087401] pci 0000:bd:00.0: [19e5:a222] type 00 class 0x020000
[    5.087409] pci 0000:bd:00.0: reg 0x10: [mem 
0x2001210f0000-0x2001210fffff 64bit pref]
[    5.087413] pci 0000:bd:00.0: reg 0x18: [mem 
0x200120f00000-0x200120ffffff 64bit pref]
[    5.087439] pci 0000:bd:00.0: reg 0x224: [mem 
0x2001210c0000-0x2001210cffff 64bit pref]
[    5.087441] pci 0000:bd:00.0: VF(n) BAR0 space: [mem 
0x2001210c0000-0x2001210effff 64bit pref] (contains BAR0 for 3 VFs)
[    5.087445] pci 0000:bd:00.0: reg 0x22c: [mem 
0x200120c00000-0x200120cfffff 64bit pref]
[    5.087447] pci 0000:bd:00.0: VF(n) BAR2 space: [mem 
0x200120c00000-0x200120efffff 64bit pref] (contains BAR2 for 3 VFs)
[    5.092534] pci 0000:bd:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.092546] pci 0000:bd:00.1: [19e5:a221] type 00 class 0x020000
[    5.092553] pci 0000:bd:00.1: reg 0x10: [mem 
0x2001210b0000-0x2001210bffff 64bit pref]
[    5.092557] pci 0000:bd:00.1: reg 0x18: [mem 
0x200120b00000-0x200120bfffff 64bit pref]
[    5.092581] pci 0000:bd:00.1: reg 0x224: [mem 
0x200121080000-0x20012108ffff 64bit pref]
[    5.092583] pci 0000:bd:00.1: VF(n) BAR0 space: [mem 
0x200121080000-0x2001210affff 64bit pref] (contains BAR0 for 3 VFs)
[    5.092587] pci 0000:bd:00.1: reg 0x22c: [mem 
0x200120800000-0x2001208fffff 64bit pref]
[    5.092589] pci 0000:bd:00.1: VF(n) BAR2 space: [mem 
0x200120800000-0x200120afffff 64bit pref] (contains BAR2 for 3 VFs)
[    5.097640] pci 0000:bd:00.1: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.097653] pci 0000:bd:00.2: [19e5:a222] type 00 class 0x020000
[    5.097660] pci 0000:bd:00.2: reg 0x10: [mem 
0x200121070000-0x20012107ffff 64bit pref]
[    5.097664] pci 0000:bd:00.2: reg 0x18: [mem 
0x200120700000-0x2001207fffff 64bit pref]
[    5.097688] pci 0000:bd:00.2: reg 0x224: [mem 
0x200121040000-0x20012104ffff 64bit pref]
[    5.097690] pci 0000:bd:00.2: VF(n) BAR0 space: [mem 
0x200121040000-0x20012106ffff 64bit pref] (contains BAR0 for 3 VFs)
[    5.097694] pci 0000:bd:00.2: reg 0x22c: [mem 
0x200120400000-0x2001204fffff 64bit pref]
[    5.097696] pci 0000:bd:00.2: VF(n) BAR2 space: [mem 
0x200120400000-0x2001206fffff 64bit pref] (contains BAR2 for 3 VFs)
[    5.102778] pci 0000:bd:00.2: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.102789] pci 0000:bd:00.3: [19e5:a221] type 00 class 0x020000
[    5.102796] pci 0000:bd:00.3: reg 0x10: [mem 
0x200121030000-0x20012103ffff 64bit pref]
[    5.102800] pci 0000:bd:00.3: reg 0x18: [mem 
0x200120300000-0x2001203fffff 64bit pref]
[    5.102825] pci 0000:bd:00.3: reg 0x224: [mem 
0x200121000000-0x20012100ffff 64bit pref]
[    5.102827] pci 0000:bd:00.3: VF(n) BAR0 space: [mem 
0x200121000000-0x20012102ffff 64bit pref] (contains BAR0 for 3 VFs)
[    5.102831] pci 0000:bd:00.3: reg 0x22c: [mem 
0x200120000000-0x2001200fffff 64bit pref]
[    5.102833] pci 0000:bd:00.3: VF(n) BAR2 space: [mem 
0x200120000000-0x2001202fffff 64bit pref] (contains BAR2 for 3 VFs)
[    5.107885] pci 0000:bd:00.3: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.107904] pci 0000:bc:00.0: bridge window [mem 
0x00100000-0x005fffff 64bit pref] to [bus bd] add_size c00000 add_align 
100000
[    5.107907] pci 0000:bc:00.0: BAR 15: assigned [mem 
0x200120000000-0x2001210fffff 64bit pref]
[    5.107913] pci 0000:bd:00.0: BAR 2: assigned [mem 
0x200120000000-0x2001200fffff 64bit pref]
[    5.107916] pci 0000:bd:00.0: BAR 9: assigned [mem 
0x200120100000-0x2001203fffff 64bit pref]
[    5.107919] pci 0000:bd:00.1: BAR 2: assigned [mem 
0x200120400000-0x2001204fffff 64bit pref]
[    5.107922] pci 0000:bd:00.1: BAR 9: assigned [mem 
0x200120500000-0x2001207fffff 64bit pref]
[    5.107924] pci 0000:bd:00.2: BAR 2: assigned [mem 
0x200120800000-0x2001208fffff 64bit pref]
[    5.107928] pci 0000:bd:00.2: BAR 9: assigned [mem 
0x200120900000-0x200120bfffff 64bit pref]
[    5.107930] pci 0000:bd:00.3: BAR 2: assigned [mem 
0x200120c00000-0x200120cfffff 64bit pref]
[    5.107933] pci 0000:bd:00.3: BAR 9: assigned [mem 
0x200120d00000-0x200120ffffff 64bit pref]
[    5.107935] pci 0000:bd:00.0: BAR 0: assigned [mem 
0x200121000000-0x20012100ffff 64bit pref]
[    5.107939] pci 0000:bd:00.0: BAR 7: assigned [mem 
0x200121010000-0x20012103ffff 64bit pref]
[    5.107941] pci 0000:bd:00.1: BAR 0: assigned [mem 
0x200121040000-0x20012104ffff 64bit pref]
[    5.107944] pci 0000:bd:00.1: BAR 7: assigned [mem 
0x200121050000-0x20012107ffff 64bit pref]
[    5.107947] pci 0000:bd:00.2: BAR 0: assigned [mem 
0x200121080000-0x20012108ffff 64bit pref]
[    5.107950] pci 0000:bd:00.2: BAR 7: assigned [mem 
0x200121090000-0x2001210bffff 64bit pref]
[    5.107953] pci 0000:bd:00.3: BAR 0: assigned [mem 
0x2001210c0000-0x2001210cffff 64bit pref]
[    5.107956] pci 0000:bd:00.3: BAR 7: assigned [mem 
0x2001210d0000-0x2001210fffff 64bit pref]
[    5.107959] pci 0000:bc:00.0: PCI bridge to [bus bd]
[    5.107962] pci 0000:bc:00.0:   bridge window [mem 
0x200120000000-0x2001210fffff 64bit pref]
[    5.107965] pci_bus 0000:bc: resource 4 [mem 
0x200120000000-0x20013fffffff pref window]
[    5.107967] pci_bus 0000:bd: resource 2 [mem 
0x200120000000-0x2001210fffff 64bit pref]
[    5.108019] ACPI: PCI Root Bridge [PCIB] (domain 0000 [bus b4-b6])
[    5.108023] acpi PNP0A08:0b: _OSC: OS supports [ExtendedConfig ASPM 
ClockPM Segments MSI HPX-Type3]
[    5.108026] acpi PNP0A08:0b: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    5.109287] acpi PNP0A08:0b: [Firmware Bug]: ECAM area [mem 
0xdb400000-0xdb6fffff] not reserved in ACPI namespace
[    5.109302] acpi PNP0A08:0b: ECAM at [mem 0xdb400000-0xdb6fffff] for 
[bus b4-b6]
[    5.109369] PCI host bridge to bus 0000:b4
[    5.109372] pci_bus 0000:b4: root bus resource [mem 
0x200141000000-0x200141ffffff pref window]
[    5.109373] pci_bus 0000:b4: root bus resource [mem 
0x200144000000-0x200145ffffff pref window]
[    5.109375] pci_bus 0000:b4: root bus resource [mem 
0xa3000000-0xa3ffffff window]
[    5.109377] pci_bus 0000:b4: root bus resource [bus b4-b6]
[    5.109383] pci 0000:b4:00.0: [19e5:a121] type 01 class 0x060400
[    5.109394] pci 0000:b4:00.0: enabling Extended Tags
[    5.114501] pci 0000:b4:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.114510] pci 0000:b4:01.0: [19e5:a121] type 01 class 0x060400
[    5.114520] pci 0000:b4:01.0: enabling Extended Tags
[    5.119597] pci 0000:b4:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.119605] pci 0000:b4:02.0: [19e5:a230] type 00 class 0x010700
[    5.119618] pci 0000:b4:02.0: reg 0x24: [mem 0xa3008000-0xa300ffff]
[    5.124732] pci 0000:b4:02.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.124743] pci 0000:b4:03.0: [19e5:a235] type 00 class 0x010601
[    5.124756] pci 0000:b4:03.0: reg 0x24: [mem 0xa3010000-0xa3010fff]
[    5.129819] pci 0000:b4:03.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.129828] pci 0000:b4:04.0: [19e5:a230] type 00 class 0x010700
[    5.129840] pci 0000:b4:04.0: reg 0x24: [mem 0xa3000000-0xa3007fff]
[    5.134948] pci 0000:b4:04.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.135033] pci 0000:b5:00.0: [19e5:a250] type 00 class 0x120000
[    5.135042] pci 0000:b5:00.0: reg 0x18: [mem 
0x200144000000-0x2001443fffff 64bit pref]
[    5.135070] pci 0000:b5:00.0: reg 0x22c: [mem 
0x200144400000-0x20014440ffff 64bit pref]
[    5.135072] pci 0000:b5:00.0: VF(n) BAR2 space: [mem 
0x200144400000-0x2001447effff 64bit pref] (contains BAR2 for 63 VFs)
[    5.140178] pci 0000:b5:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.140218] pci 0000:b6:00.0: [19e5:a255] type 00 class 0x100000
[    5.140228] pci 0000:b6:00.0: reg 0x18: [mem 
0x200144800000-0x200144bfffff 64bit pref]
[    5.140255] pci 0000:b6:00.0: reg 0x22c: [mem 
0x200144c00000-0x200144c0ffff 64bit pref]
[    5.140257] pci 0000:b6:00.0: VF(n) BAR2 space: [mem 
0x200144c00000-0x200144feffff 64bit pref] (contains BAR2 for 63 VFs)
[    5.145366] pci 0000:b6:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
[    5.145384] pci 0000:b4:00.0: bridge window [mem 
0x00400000-0x007fffff 64bit pref] to [bus b5] add_size 400000 add_align 
400000
[    5.145387] pci 0000:b4:01.0: bridge window [mem 
0x00400000-0x007fffff 64bit pref] to [bus b6] add_size 400000 add_align 
400000
[    5.145391] pci 0000:b4:00.0: BAR 15: assigned [mem 
0x200141000000-0x2001417fffff 64bit pref]
[    5.145393] pci 0000:b4:01.0: BAR 15: assigned [mem 
0x200141800000-0x200141ffffff 64bit pref]
[    5.145395] pci 0000:b4:02.0: BAR 5: assigned [mem 0xa3000000-0xa3007fff]
[    5.145398] pci 0000:b4:04.0: BAR 5: assigned [mem 0xa3008000-0xa300ffff]
[    5.145400] pci 0000:b4:03.0: BAR 5: assigned [mem 0xa3010000-0xa3010fff]
[    5.145403] pci 0000:b5:00.0: BAR 2: assigned [mem 
0x200141000000-0x2001413fffff 64bit pref]
[    5.145406] pci 0000:b5:00.0: BAR 9: assigned [mem 
0x200141400000-0x2001417effff 64bit pref]
[    5.145409] pci 0000:b4:00.0: PCI bridge to [bus b5]
[    5.145412] pci 0000:b4:00.0:   bridge window [mem 
0x200141000000-0x2001417fffff 64bit pref]
[    5.145415] pci 0000:b6:00.0: BAR 2: assigned [mem 
0x200141800000-0x200141bfffff 64bit pref]
[    5.145418] pci 0000:b6:00.0: BAR 9: assigned [mem 
0x200141c00000-0x200141feffff 64bit pref]
[    5.145420] pci 0000:b4:01.0: PCI bridge to [bus b6]
[    5.145423] pci 0000:b4:01.0:   bridge window [mem 
0x200141800000-0x200141ffffff 64bit pref]
[    5.145426] pci_bus 0000:b4: resource 4 [mem 
0x200141000000-0x200141ffffff pref window]
[    5.145428] pci_bus 0000:b4: resource 5 [mem 
0x200144000000-0x200145ffffff pref window]
[    5.145429] pci_bus 0000:b4: resource 6 [mem 0xa3000000-0xa3ffffff 
window]
[    5.145431] pci_bus 0000:b5: resource 2 [mem 
0x200141000000-0x2001417fffff 64bit pref]
[    5.145433] pci_bus 0000:b6: resource 2 [mem 
0x200141800000-0x200141ffffff 64bit pref]
[    5.155455] xen:balloon: Initialising balloon driver
[    5.157348] iommu: Default domain type: Translated
[    5.157470] pci 0000:0f:00.0: vgaarb: VGA device added: 
decodes=io+mem,owns=none,locks=none
[    5.157482] pci 0000:0f:00.0: vgaarb: bridge control possible
[    5.157485] pci 0000:0f:00.0: vgaarb: setting as boot device (VGA 
legacy resources not available)
[    5.157487] vgaarb: loaded
[    5.157668] SCSI subsystem initialized
[    5.158829] ACPI: bus type USB registered
[    5.158848] usbcore: registered new interface driver usbfs
[    5.158857] usbcore: registered new interface driver hub
[    5.162292] usbcore: registered new device driver usb
[    5.162561] pps_core: LinuxPPS API ver. 1 registered
[    5.162563] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 
Rodolfo Giometti <giometti@linux.it>
[    5.162566] PTP clock support registered
[    5.162608] EDAC MC: Ver: 3.0.0
[    5.162865] Registered efivars operations
[    5.163087] No ACPI PMU IRQ for CPU0
[    5.163089] No ACPI PMU IRQ for CPU1
[    5.163090] No ACPI PMU IRQ for CPU2
[    5.163091] No ACPI PMU IRQ for CPU3
[    5.163092] No ACPI PMU IRQ for CPU4
[    5.163093] No ACPI PMU IRQ for CPU5
[    5.163094] No ACPI PMU IRQ for CPU6
[    5.163095] No ACPI PMU IRQ for CPU7
[    5.163096] No ACPI PMU IRQ for CPU8
[    5.163096] No ACPI PMU IRQ for CPU9
[    5.163097] No ACPI PMU IRQ for CPU10
[    5.163099] No ACPI PMU IRQ for CPU11
[    5.163099] No ACPI PMU IRQ for CPU12
[    5.163100] No ACPI PMU IRQ for CPU13
[    5.163101] No ACPI PMU IRQ for CPU14
[    5.163102] No ACPI PMU IRQ for CPU15
[    5.163103] No ACPI PMU IRQ for CPU16
[    5.163105] No ACPI PMU IRQ for CPU17
[    5.163105] No ACPI PMU IRQ for CPU18
[    5.163106] No ACPI PMU IRQ for CPU19
[    5.163107] No ACPI PMU IRQ for CPU20
[    5.163108] No ACPI PMU IRQ for CPU21
[    5.163109] No ACPI PMU IRQ for CPU22
[    5.163110] No ACPI PMU IRQ for CPU23
[    5.163111] No ACPI PMU IRQ for CPU24
[    5.163112] No ACPI PMU IRQ for CPU25
[    5.163113] No ACPI PMU IRQ for CPU26
[    5.163114] No ACPI PMU IRQ for CPU27
[    5.163115] No ACPI PMU IRQ for CPU28
[    5.163116] No ACPI PMU IRQ for CPU29
[    5.163117] No ACPI PMU IRQ for CPU30
[    5.163118] No ACPI PMU IRQ for CPU31
[    5.163119] No ACPI PMU IRQ for CPU32
[    5.163119] No ACPI PMU IRQ for CPU33
[    5.163120] No ACPI PMU IRQ for CPU34
[    5.163121] No ACPI PMU IRQ for CPU35
[    5.163122] No ACPI PMU IRQ for CPU36
[    5.163123] No ACPI PMU IRQ for CPU37
[    5.163124] No ACPI PMU IRQ for CPU38
[    5.163125] No ACPI PMU IRQ for CPU39
[    5.163126] No ACPI PMU IRQ for CPU40
[    5.163127] No ACPI PMU IRQ for CPU41
[    5.163128] No ACPI PMU IRQ for CPU42
[    5.163129] No ACPI PMU IRQ for CPU43
[    5.163130] No ACPI PMU IRQ for CPU44
[    5.163131] No ACPI PMU IRQ for CPU45
[    5.163132] No ACPI PMU IRQ for CPU46
[    5.163132] No ACPI PMU IRQ for CPU47
[    5.163133] No ACPI PMU IRQ for CPU48
[    5.163134] No ACPI PMU IRQ for CPU49
[    5.163135] No ACPI PMU IRQ for CPU50
[    5.163136] No ACPI PMU IRQ for CPU51
[    5.163137] No ACPI PMU IRQ for CPU52
[    5.163138] No ACPI PMU IRQ for CPU53
[    5.163139] No ACPI PMU IRQ for CPU54
[    5.163140] No ACPI PMU IRQ for CPU55
[    5.163141] No ACPI PMU IRQ for CPU56
[    5.163142] No ACPI PMU IRQ for CPU57
[    5.163143] No ACPI PMU IRQ for CPU58
[    5.163144] No ACPI PMU IRQ for CPU59
[    5.163145] No ACPI PMU IRQ for CPU60
[    5.163146] No ACPI PMU IRQ for CPU61
[    5.163147] No ACPI PMU IRQ for CPU62
[    5.163148] No ACPI PMU IRQ for CPU63
[    5.163149] No ACPI PMU IRQ for CPU64
[    5.163150] No ACPI PMU IRQ for CPU65
[    5.163150] No ACPI PMU IRQ for CPU66
[    5.163152] No ACPI PMU IRQ for CPU67
[    5.163152] No ACPI PMU IRQ for CPU68
[    5.163153] No ACPI PMU IRQ for CPU69
[    5.163154] No ACPI PMU IRQ for CPU70
[    5.163155] No ACPI PMU IRQ for CPU71
[    5.163156] No ACPI PMU IRQ for CPU72
[    5.163157] No ACPI PMU IRQ for CPU73
[    5.163158] No ACPI PMU IRQ for CPU74
[    5.163159] No ACPI PMU IRQ for CPU75
[    5.163160] No ACPI PMU IRQ for CPU76
[    5.163160] No ACPI PMU IRQ for CPU77
[    5.163161] No ACPI PMU IRQ for CPU78
[    5.163163] No ACPI PMU IRQ for CPU79
[    5.163164] No ACPI PMU IRQ for CPU80
[    5.163164] No ACPI PMU IRQ for CPU81
[    5.163165] No ACPI PMU IRQ for CPU82
[    5.163166] No ACPI PMU IRQ for CPU83
[    5.163167] No ACPI PMU IRQ for CPU84
[    5.163168] No ACPI PMU IRQ for CPU85
[    5.163169] No ACPI PMU IRQ for CPU86
[    5.163170] No ACPI PMU IRQ for CPU87
[    5.163171] No ACPI PMU IRQ for CPU88
[    5.163171] No ACPI PMU IRQ for CPU89
[    5.163172] No ACPI PMU IRQ for CPU90
[    5.163173] No ACPI PMU IRQ for CPU91
[    5.163174] No ACPI PMU IRQ for CPU92
[    5.163175] No ACPI PMU IRQ for CPU93
[    5.163176] No ACPI PMU IRQ for CPU94
[    5.163177] No ACPI PMU IRQ for CPU95
[    5.163178] No ACPI PMU IRQ for CPU96
[    5.163179] No ACPI PMU IRQ for CPU97
[    5.163180] No ACPI PMU IRQ for CPU98
[    5.163181] No ACPI PMU IRQ for CPU99
[    5.163181] No ACPI PMU IRQ for CPU100
[    5.163182] No ACPI PMU IRQ for CPU101
[    5.163183] No ACPI PMU IRQ for CPU102
[    5.163184] No ACPI PMU IRQ for CPU103
[    5.163185] No ACPI PMU IRQ for CPU104
[    5.163186] No ACPI PMU IRQ for CPU105
[    5.163187] No ACPI PMU IRQ for CPU106
[    5.163188] No ACPI PMU IRQ for CPU107
[    5.163189] No ACPI PMU IRQ for CPU108
[    5.163190] No ACPI PMU IRQ for CPU109
[    5.163190] No ACPI PMU IRQ for CPU110
[    5.163191] No ACPI PMU IRQ for CPU111
[    5.163192] No ACPI PMU IRQ for CPU112
[    5.163194] No ACPI PMU IRQ for CPU113
[    5.163194] No ACPI PMU IRQ for CPU114
[    5.163195] No ACPI PMU IRQ for CPU115
[    5.163196] No ACPI PMU IRQ for CPU116
[    5.163197] No ACPI PMU IRQ for CPU117
[    5.163198] No ACPI PMU IRQ for CPU118
[    5.163199] No ACPI PMU IRQ for CPU119
[    5.163200] No ACPI PMU IRQ for CPU120
[    5.163201] No ACPI PMU IRQ for CPU121
[    5.163202] No ACPI PMU IRQ for CPU122
[    5.163203] No ACPI PMU IRQ for CPU123
[    5.163203] No ACPI PMU IRQ for CPU124
[    5.163204] No ACPI PMU IRQ for CPU125
[    5.163205] No ACPI PMU IRQ for CPU126
[    5.163206] No ACPI PMU IRQ for CPU127
[    5.167491] FPGA manager framework
[    5.167508] Advanced Linux Sound Architecture Driver Initialized.
[    5.170686] clocksource: Switched to clocksource arch_sys_counter
[    5.175927] VFS: Disk quotas dquot_6.6.0
[    5.175954] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 
bytes)
[    5.176029] pnp: PnP ACPI init
[    5.176970] pnp: PnP ACPI: found 1 devices
[    5.178638] NET: Registered protocol family 2
[    5.178760] tcp_listen_portaddr_hash hash table entries: 2048 (order: 
3, 32768 bytes, vmalloc)
[    5.178782] TCP established hash table entries: 32768 (order: 6, 
262144 bytes, vmalloc)
[    5.178861] TCP bind hash table entries: 32768 (order: 7, 524288 
bytes, vmalloc)
[    5.178951] TCP: Hash tables configured (established 32768 bind 32768)
[    5.179061] UDP hash table entries: 2048 (order: 4, 65536 bytes, vmalloc)
[    5.179082] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, 
vmalloc)
[    5.179553] NET: Registered protocol family 1
[    5.180310] RPC: Registered named UNIX socket transport module.
[    5.180312] RPC: Registered udp transport module.
[    5.180313] RPC: Registered tcp transport module.
[    5.180314] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    5.180358] pci 0000:7a:00.0: enabling device (0000 -> 0002)
[    5.180385] pci 0000:7a:02.0: enabling device (0000 -> 0002)
[    5.180456] PCI: CLS 32 bytes, default 64
[    5.190926] hw perfevents: enabled with armv8_pmuv3_0 PMU driver, 1 
counters available
[    5.190937] kvm [1]: HYP mode not available
[    5.196031] Initialise system trusted keyrings
[    5.196151] workingset: timestamp_bits=44 max_order=20 bucket_order=0
[    5.197370] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.198342] NFS: Registering the id_resolver key type
[    5.198350] Key type id_resolver registered
[    5.198351] Key type id_legacy registered
[    5.198356] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    5.198395] 9p: Installing v9fs 9p2000 file system support
[    5.203179] Key type asymmetric registered
[    5.203182] Asymmetric key parser 'x509' registered
[    5.203194] Block layer SCSI generic (bsg) driver version 0.4 loaded 
(major 245)
[    5.203196] io scheduler mq-deadline registered
[    5.203197] io scheduler kyber registered
[    5.213799] gpio-dwapb HISI0181:00: IRQ index 1 not found
[    5.213801] gpio-dwapb HISI0181:00: IRQ index 2 not found
[    5.213803] gpio-dwapb HISI0181:00: IRQ index 3 not found
[    5.213805] gpio-dwapb HISI0181:00: IRQ index 4 not found
[    5.213806] gpio-dwapb HISI0181:00: IRQ index 5 not found
[    5.213807] gpio-dwapb HISI0181:00: IRQ index 6 not found
[    5.213808] gpio-dwapb HISI0181:00: IRQ index 7 not found
[    5.213810] gpio-dwapb HISI0181:00: IRQ index 8 not found
[    5.213811] gpio-dwapb HISI0181:00: IRQ index 9 not found
[    5.213812] gpio-dwapb HISI0181:00: IRQ index 10 not found
[    5.213814] gpio-dwapb HISI0181:00: IRQ index 11 not found
[    5.213815] gpio-dwapb HISI0181:00: IRQ index 12 not found
[    5.213816] gpio-dwapb HISI0181:00: IRQ index 13 not found
[    5.213817] gpio-dwapb HISI0181:00: IRQ index 14 not found
[    5.213819] gpio-dwapb HISI0181:00: IRQ index 15 not found
[    5.213820] gpio-dwapb HISI0181:00: IRQ index 16 not found
[    5.213822] gpio-dwapb HISI0181:00: IRQ index 17 not found
[    5.213823] gpio-dwapb HISI0181:00: IRQ index 18 not found
[    5.213824] gpio-dwapb HISI0181:00: IRQ index 19 not found
[    5.213825] gpio-dwapb HISI0181:00: IRQ index 20 not found
[    5.213826] gpio-dwapb HISI0181:00: IRQ index 21 not found
[    5.213828] gpio-dwapb HISI0181:00: IRQ index 22 not found
[    5.213829] gpio-dwapb HISI0181:00: IRQ index 23 not found
[    5.213830] gpio-dwapb HISI0181:00: IRQ index 24 not found
[    5.213831] gpio-dwapb HISI0181:00: IRQ index 25 not found
[    5.213832] gpio-dwapb HISI0181:00: IRQ index 26 not found
[    5.213834] gpio-dwapb HISI0181:00: IRQ index 27 not found
[    5.213835] gpio-dwapb HISI0181:00: IRQ index 28 not found
[    5.213836] gpio-dwapb HISI0181:00: IRQ index 29 not found
[    5.213837] gpio-dwapb HISI0181:00: IRQ index 30 not found
[    5.213839] gpio-dwapb HISI0181:00: IRQ index 31 not found
[    5.215710] pcieport 0000:00:00.0: PME: Signaling with IRQ 48
[    5.215851] pcieport 0000:00:00.0: AER: enabled with IRQ 49
[    5.216771] pcieport 0000:00:08.0: PME: Signaling with IRQ 50
[    5.216884] pcieport 0000:00:08.0: AER: enabled with IRQ 51
[    5.217767] pcieport 0000:00:0c.0: PME: Signaling with IRQ 52
[    5.217882] pcieport 0000:00:0c.0: AER: enabled with IRQ 53
[    5.218760] pcieport 0000:00:10.0: PME: Signaling with IRQ 54
[    5.218874] pcieport 0000:00:10.0: AER: enabled with IRQ 55
[    5.219745] pcieport 0000:00:11.0: PME: Signaling with IRQ 56
[    5.219855] pcieport 0000:00:11.0: AER: enabled with IRQ 57
[    5.220743] pcieport 0000:00:12.0: PME: Signaling with IRQ 58
[    5.220863] pcieport 0000:00:12.0: AER: enabled with IRQ 59
[    5.222767] pcieport 0000:80:00.0: PME: Signaling with IRQ 60
[    5.222883] pcieport 0000:80:00.0: AER: enabled with IRQ 61
[    5.223781] pcieport 0000:80:04.0: PME: Signaling with IRQ 62
[    5.223880] pcieport 0000:80:04.0: AER: enabled with IRQ 63
[    5.224806] pcieport 0000:80:08.0: PME: Signaling with IRQ 64
[    5.224915] pcieport 0000:80:08.0: AER: enabled with IRQ 65
[    5.225791] pcieport 0000:80:0c.0: PME: Signaling with IRQ 66
[    5.225892] pcieport 0000:80:0c.0: AER: enabled with IRQ 67
[    5.226767] pcieport 0000:80:10.0: PME: Signaling with IRQ 68
[    5.226884] pcieport 0000:80:10.0: AER: enabled with IRQ 69
[    5.228804] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    5.228830] ACPI: Power Button [PWRB]
[    5.233703] ERST: Error Record Serialization Table (ERST) support is 
initialized.
[    5.233710] pstore: Registered erst as persistent store backend
[    5.233736] ghes_edac: This system has a very crappy BIOS: It doesn't 
even list the DIMMS.
[    5.233738] ghes_edac: Its SMBIOS info is wrong. It is doubtful that 
the error report would
[    5.233739] ghes_edac: work on such system. Use this driver with caution
[    5.233771] EDAC MC0: Giving out device to module ghes_edac.c 
controller ghes_edac: DEV ghes (INTERRUPT)
[    5.234064] GHES: APEI firmware first mode is enabled by APEI bit and 
WHEA _OSC.
[    5.234106] EINJ: Error INJection is initialized.
[    5.234196] ACPI GTDT: found 1 SBSA generic Watchdog(s).
[    5.237106] xen:xen_evtchn: Event-channel device installed
[    5.238950] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    5.259453] 00:00: ttyS0 at MMIO 0x3f00002f8 (irq = 9, base_baud = 
115200) is a 16550A
[   38.052332] printk: console [ttyS0] enabled
[   38.057482] SuperH (H)SCI(F) driver initialized
[   38.062181] msm_serial: driver initialized
[   38.090033] loop: module loaded
[   38.094630] hisi_sas_v3_hw 0000:74:02.0: enabling device (0000 -> 0002)
[   38.112154] scsi host0: hisi_sas_v3_hw
[   40.328767] hisi_sas_v3_hw 0000:74:04.0: enabling device (0000 -> 0002)
[   40.341874] scsi host1: hisi_sas_v3_hw
[   42.564161] scsi host2: hisi_sas_v3_hw
[   43.782085] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy0 link_rate=10(sata)
[   43.788683] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy1 link_rate=10(sata)
[   43.795491] hisi_sas_v3_hw 0000:b4:02.0: dev[1:5] found
[   43.802234] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[   43.810034] hisi_sas_v3_hw 0000:b4:02.0: phydown: phy0 phy_state=0x2
[   43.816361] hisi_sas_v3_hw 0000:b4:02.0: ignore flutter phy0 down
[   43.966658] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy0 link_rate=10(sata)
[   44.134507] ata1.00: ATA-11: SAMSUNG MZ7LH960HAJR-00005, HXT7404Q, 
max UDMA/133
[   44.141790] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 32)
[   44.150215] ata1.00: configured for UDMA/133
[   44.154492] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 
tries: 1
[   44.165110] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG MZ7LH960 
404Q PQ: 0 ANSI: 5
[   44.173473] hisi_sas_v3_hw 0000:b4:02.0: dev[2:5] found
[   44.173675] sd 2:0:0:0: [sda] 1875385008 512-byte logical blocks: 
(960 GB/894 GiB)
[   44.180081] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
[   44.186239] sd 2:0:0:0: [sda] 4096-byte physical blocks
[   44.193887] hisi_sas_v3_hw 0000:b4:02.0: phydown: phy1 phy_state=0x1
[   44.193890] hisi_sas_v3_hw 0000:b4:02.0: ignore flutter phy1 down
[   44.350508] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy1 link_rate=10(sata)
[   44.518256] ata2.00: ATA-11: SAMSUNG MZ7LH960HAJR-00005, HXT7404Q, 
max UDMA/133
[   44.525538] ata2.00: 1875385008 sectors, multi 16: LBA48 NCQ (depth 32)
[   44.533724] ata2.00: configured for UDMA/133
[   44.537993] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 0 
tries: 1
[   44.544962] sd 2:0:0:0: [sda] Write Protect is off
[   44.548433] scsi 2:0:1:0: Direct-Access     ATA      SAMSUNG MZ7LH960 
404Q PQ: 0 ANSI: 5
[   44.557827] sd 2:0:0:0: [sda] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA
[   44.558080] sd 2:0:1:0: [sdb] 1875385008 512-byte logical blocks: 
(960 GB/894 GiB)
[   44.558082] sd 2:0:1:0: [sdb] 4096-byte physical blocks
[   44.558089] sd 2:0:1:0: [sdb] Write Protect is off
[   44.558101] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA
[   44.593392] sas: sas_form_port: phy0 belongs to port0 already(1)!
[   44.594679]  sdb: sdb1 sdb2 < >
[   44.599469] sas: sas_form_port: phy1 belongs to port1 already(1)!
[   44.610149] sd 2:0:1:0: [sdb] Attached SCSI disk
[   44.611217]  sda: sda1 sda2 sda3 sda4 sda5
[   44.620381] sd 2:0:0:0: [sda] Attached SCSI disk
[   44.785963] cma: cma_alloc: alloc failed, req-size: 64 pages, ret: -12
[   44.792494] cma: cma_alloc: alloc failed, req-size: 16 pages, ret: -12
[   44.799001] cma: cma_alloc: alloc failed, req-size: 64 pages, ret: -12
[   44.805522] cma: cma_alloc: alloc failed, req-size: 16 pages, ret: -12
[   44.812027] cma: cma_alloc: alloc failed, req-size: 64 pages, ret: -12
[   44.818546] cma: cma_alloc: alloc failed, req-size: 16 pages, ret: -12
[   44.825055] cma: cma_alloc: alloc failed, req-size: 64 pages, ret: -12
[   44.831576] cma: cma_alloc: alloc failed, req-size: 16 pages, ret: -12
[   44.838080] cma: cma_alloc: alloc failed, req-size: 64 pages, ret: -12
[   44.844598] cma: cma_alloc: alloc failed, req-size: 16 pages, ret: -12
[   44.851102] cma: cma_alloc: alloc failed, req-size: 64 pages, ret: -12
[   44.857623] cma: cma_alloc: alloc failed, req-size: 16 pages, ret: -12
[   44.864132] cma: cma_alloc: alloc failed, req-size: 64 pages, ret: -12
[   44.870654] cma: cma_alloc: alloc failed, req-size: 16 pages, ret: -12
[   44.877159] cma: cma_alloc: alloc failed, req-size: 64 pages, ret: -12
[   44.883679] cma: cma_alloc: alloc failed, req-size: 16 pages, ret: -12
[   44.890185] cma: cma_alloc: alloc failed, req-size: 32 pages, ret: -12
[   44.900715] cma: cma_alloc: alloc failed, req-size: 32 pages, ret: -12
[   44.907228] cma: cma_alloc: alloc failed, req-size: 128 pages, ret: -12
[   44.913860] cma: cma_alloc: alloc failed, req-size: 1024 pages, ret: -12
[   44.921158] scsi host3: hisi_sas_v3_hw
[   47.137108] ahci 0000:74:03.0: SSS flag set, parallel bus scan disabled
[   47.143727] ahci 0000:74:03.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 
0x3 impl SATA mode
[   47.151782] ahci 0000:74:03.0: flags: 64bit ncq sntf stag pm led clo 
only pmp fbs slum part ccc ems sxs boh
[   47.161582] cma: cma_alloc: alloc failed, req-size: 32 pages, ret: -12
[   47.168102] cma: cma_alloc: alloc failed, req-size: 32 pages, ret: -12
[   47.174924] scsi host4: ahci
[   47.178093] scsi host5: ahci
[   47.181086] ata3: SATA max UDMA/133 abar m4096@0xa2010000 port 
0xa2010100 irq 200
[   47.188537] ata4: SATA max UDMA/133 abar m4096@0xa2010000 port 
0xa2010180 irq 201
[   47.196257] ahci 0000:b4:03.0: SSS flag set, parallel bus scan disabled
[   47.202868] ahci 0000:b4:03.0: AHCI 0001.0300 32 slots 2 ports 6 Gbps 
0x3 impl SATA mode
[   47.210931] ahci 0000:b4:03.0: flags: 64bit ncq sntf stag pm led clo 
only pmp fbs slum part ccc ems sxs boh
[   47.220729] cma: cma_alloc: alloc failed, req-size: 32 pages, ret: -12
[   47.227248] cma: cma_alloc: alloc failed, req-size: 32 pages, ret: -12
[   47.234070] scsi host6: ahci
[   47.237241] scsi host7: ahci
[   47.240251] ata5: SATA max UDMA/133 abar m4096@0xa3010000 port 
0xa3010100 irq 202
[   47.247707] ata6: SATA max UDMA/133 abar m4096@0xa3010000 port 
0xa3010180 irq 203
[   47.256936] libphy: Fixed MDIO Bus: probed
[   47.261085] tun: Universal TUN/TAP device driver, 1.6
[   47.266569] thunder_xcv, ver 1.0
[   47.269822] thunder_bgx, ver 1.0
[   47.273053] nicpf, ver 1.0
[   47.276066] hclge is initializing
[   47.279371] hns3: Hisilicon Ethernet Network Driver for Hip08 Family 
- version
[   47.286562] hns3: Copyright (c) 2017 Huawei Corporation.
[   47.291993] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.298419] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.304853] hns3 0000:7d:00.0: The firmware version is 1.9.23.6
[   47.314001] libphy: hisilicon MII bus: probed
[   47.373536] hns3 0000:7d:00.0: hclge driver initialization finished.
[   47.379931] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.386351] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.392997] Generic PHY mii-0000:7d:00.0:01: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:7d:00.0:01, irq=POLL)
[   47.404738] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.411155] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.417587] hns3 0000:7d:00.1: The firmware version is 1.9.23.6
[   47.425140] libphy: hisilicon MII bus: probed
[   47.510860] ata3: SATA link down (SStatus 0 SControl 300)
[   47.525326] hns3 0000:7d:00.1: hclge driver initialization finished.
[   47.531715] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.538138] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.544783] Generic PHY mii-0000:7d:00.1:03: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:7d:00.1:03, irq=POLL)
[   47.556496] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.562914] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.566900] ata5: SATA link down (SStatus 0 SControl 300)
[   47.569348] hns3 0000:7d:00.2: The firmware version is 1.9.23.6
[   47.583671] libphy: hisilicon MII bus: probed
[   47.661540] hns3 0000:7d:00.2: hclge driver initialization finished.
[   47.667932] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.674353] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.681000] Generic PHY mii-0000:7d:00.2:05: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:7d:00.2:05, irq=POLL)
[   47.692741] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.699162] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.705593] hns3 0000:7d:00.3: The firmware version is 1.9.23.6
[   47.713128] libphy: hisilicon MII bus: probed
[   47.793320] hns3 0000:7d:00.3: hclge driver initialization finished.
[   47.799717] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.806137] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.812789] Generic PHY mii-0000:7d:00.3:07: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:7d:00.3:07, irq=POLL)
[   47.824544] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.830914] ata4: SATA link down (SStatus 0 SControl 300)
[   47.830970] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.842780] hns3 0000:bd:00.0: The firmware version is 1.9.23.6
[   47.851883] libphy: hisilicon MII bus: probed
[   47.929550] hns3 0000:bd:00.0: hclge driver initialization finished.
[   47.935956] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.942377] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.949036] Generic PHY mii-0000:bd:00.0:01: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:bd:00.0:01, irq=POLL)
[   47.960841] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.967261] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   47.973692] hns3 0000:bd:00.1: The firmware version is 1.9.23.6
[   47.981243] libphy: hisilicon MII bus: probed
[   48.061323] hns3 0000:bd:00.1: hclge driver initialization finished.
[   48.067715] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   48.074139] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   48.080803] Generic PHY mii-0000:bd:00.1:03: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:bd:00.1:03, irq=POLL)
[   48.092513] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   48.098936] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   48.105368] hns3 0000:bd:00.2: The firmware version is 1.9.23.6
[   48.114306] libphy: hisilicon MII bus: probed
[   48.150882] ata6: SATA link down (SStatus 0 SControl 300)
[   48.193554] hns3 0000:bd:00.2: hclge driver initialization finished.
[   48.199953] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   48.206377] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   48.213024] Generic PHY mii-0000:bd:00.2:05: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:bd:00.2:05, irq=POLL)
[   48.224777] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   48.231198] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   48.237629] hns3 0000:bd:00.3: The firmware version is 1.9.23.6
[   48.245253] libphy: hisilicon MII bus: probed
[   48.325322] hns3 0000:bd:00.3: hclge driver initialization finished.
[   48.331721] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   48.338144] cma: cma_alloc: alloc failed, req-size: 8 pages, ret: -12
[   48.344794] Generic PHY mii-0000:bd:00.3:07: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:bd:00.3:07, irq=POLL)
[   48.356449] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[   48.362277] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[   48.368207] igb: Intel(R) Gigabit Ethernet Network Driver - version 
5.6.0-k
[   48.375141] igb: Copyright (c) 2007-2014 Intel Corporation.
[   48.380708] igbvf: Intel(R) Gigabit Virtual Function Network Driver - 
version 2.4.0-k
[   48.388503] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[   48.394671] sky2: driver version 1.30
[   48.398629] xen_netfront: Initialising Xen virtual ethernet driver
[   48.404878] VFIO - User Level meta-driver version: 0.3
[   48.410748] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   48.417261] ehci-pci: EHCI PCI platform driver
[   48.421894] ehci-pci 0000:7a:01.0: EHCI Host Controller
[   48.427120] ehci-pci 0000:7a:01.0: new USB bus registered, assigned 
bus number 1
[   48.434534] ehci-pci 0000:7a:01.0: irq 47, io mem 0x20c101000
[   48.452655] ehci-pci 0000:7a:01.0: USB 0.0 started, EHCI 1.00
[   48.458533] hub 1-0:1.0: USB hub found
[   48.462273] hub 1-0:1.0: 2 ports detected
[   48.466393] ehci-platform: EHCI generic platform driver
[   48.471699] ehci-orion: EHCI orion driver
[   48.475758] ehci-exynos: EHCI EXYNOS driver
[   48.479978] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[   48.486145] ohci-pci: OHCI PCI platform driver
[   48.490670] ohci-pci 0000:7a:00.0: OHCI PCI host controller
[   48.496237] ohci-pci 0000:7a:00.0: new USB bus registered, assigned 
bus number 2
[   48.503626] ohci-pci 0000:7a:00.0: irq 47, io mem 0x20c100000
[   48.572805] hub 2-0:1.0: USB hub found
[   48.576542] hub 2-0:1.0: 2 ports detected
[   48.580680] ohci-platform: OHCI generic platform driver
[   48.585948] ohci-exynos: OHCI EXYNOS driver
[   48.590282] xhci_hcd 0000:7a:02.0: xHCI Host Controller
[   48.595499] xhci_hcd 0000:7a:02.0: new USB bus registered, assigned 
bus number 3
[   48.602952] xhci_hcd 0000:7a:02.0: hcc params 0x0220f66d hci version 
0x100 quirks 0x0000000000000010
[   48.612351] hub 3-0:1.0: USB hub found
[   48.616098] hub 3-0:1.0: 1 port detected
[   48.620087] xhci_hcd 0000:7a:02.0: xHCI Host Controller
[   48.625301] xhci_hcd 0000:7a:02.0: new USB bus registered, assigned 
bus number 4
[   48.632667] xhci_hcd 0000:7a:02.0: Host supports USB 3.0 SuperSpeed
[   48.638922] usb usb4: We don't know the algorithms for LPM for this 
host, disabling LPM.
[   48.647084] hub 4-0:1.0: USB hub found
[   48.650825] hub 4-0:1.0: 1 port detected
[   48.654987] usbcore: registered new interface driver usb-storage
[   48.662412] i2c /dev entries driver
[   48.668019] sdhci: Secure Digital Host Controller Interface driver
[   48.674177] sdhci: Copyright(c) Pierre Ossman
[   48.678767] Synopsys Designware Multimedia Card Interface Driver
[   48.685112] sdhci-pltfm: SDHCI platform and OF driver helper
[   48.695737] ledtrig-cpu: registered to indicate activity on CPUs
[   48.702357] usbcore: registered new interface driver usbhid
[   48.707917] usbhid: USB HID core driver
[   48.800660] usb 1-1: new high-speed USB device number 2 using ehci-pci
[   48.898007] NET: Registered protocol family 17
[   48.902498] 9pnet: Installing 9P2000 support
[   48.906775] Key type dns_resolver registered
[   48.911149] registered taskstats version 1
[   48.915239] Loading compiled-in X.509 certificates
[   48.920117] pstore: Using crash dump compression: deflate
[   48.926257] hctosys: unable to open rtc device (rtc0)
[   48.931327] ALSA device list:
[   48.934287]   No soundcards found.
[   48.942095] random: fast init done
[   48.952657] usb 3-1: new high-speed USB device number 2 using xhci_hcd
[   48.969797] hub 1-1:1.0: USB hub found
[   48.974150] hub 1-1:1.0: 4 ports detected
[   48.975218] EXT4-fs (sdb1): recovery complete
[   48.982586] EXT4-fs (sdb1): mounted filesystem with ordered data 
mode. Opts: (null)
[   48.990247] VFS: Mounted root (ext4 filesystem) on device 8:17.
[   48.996817] devtmpfs: mounted
[   49.001459] Freeing unused kernel memory: 5184K
[   49.006066] Run /sbin/init as init process
[   49.036459] systemd[1]: System time before build time, advancing clock.
[   49.045902] efivars: get_next_variable: status=8000000000000003
[   49.054565] random: systemd: uninitialized urandom read (16 bytes read)
[   49.062151] random: systemd: uninitialized urandom read (16 bytes read)
[   49.096711] systemd[1]: systemd 229 running in system mode. (+PAM 
+AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP 
+GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN)
[   49.114673] systemd[1]: Detected virtualization xen.
[   49.119623] systemd[1]: Detected architecture arm64.

Welcome to Ubuntu 16.04 LTS!
Wei Xu Jan. 7, 2020, 9:48 a.m. UTC | #7
Hi Julien,

On 2020/1/7 17:10, Julien Grall wrote:
>
>
> On 07/01/2020 08:39, Wei Xu wrote:
>> Hi Stefano,
>>
>> On 2020/1/7 6:01, Stefano Stabellini wrote:
>>> On Sat, 28 Dec 2019, Wei Xu wrote:
>>>> Hi Julien,
>>>>
>>>> On 2019/12/28 16:09, Julien Grall wrote:
>>>>> Hi,
>>>>>
>>>>> On 28/12/2019 03:08, Wei Xu wrote:
>>>>>> This patch fixes the typo about the active status range of an IRQ
>>>>>> via GICD. Otherwise it will be failed to handle the mmio access and
>>>>>> inject a data abort.
>>>>> I have seen a patch similar from NXP a month ago and I disagreed 
>>>>> on the
>>>>> approach.
>>>>>
>>>>> If you look at the context you modifed, it says that reading 
>>>>> ACTIVER is not
>>>>> supported. While I agree the behavior is not consistent accross 
>>>>> ACTIVER,
>>>>> injecting a data abort is a perfectly fine behavior to me (though 
>>>>> not spec
>>>>> compliant) as we don't implement the registers correctly.
>>>>>
>>>>> I guess you are sending this patch, because you tried Linux 5.4 
>>>>> (or later)
>>>>> on Xen, right? Linux has recently began to read ACTIVER to check 
>>>>> whether an
>>>>> IRQ is active at the HW level during the synchronizing of the 
>>>>> IRQS. From my
>>>>> understanding, this is used because there is a window where the 
>>>>> interrupt is
>>>>> active at the HW level but the Linux IRQ subsystem is not aware of 
>>>>> it.
>>>>>
>>>>> While the patch below will allow Linux 5.4 to not crash, it is not 
>>>>> going to
>>>>> make it fly very far because of the above. So I am rather not 
>>>>> happy with
>>>>> persuing with returning 0.
>>>>>
>>>> Yes, I am using Linux 5.5-rc2 :)
>>>> Got it and thanks for the explanation.
>>>> I am not insistent on this and OK to wait for the update.
>>>> Thanks and have a very happy new year!
>>> Hi Wei,
>>>
>>> what do you do to reproduce the issue? Are you just booting Linux
>>> 5.5-rc2 as dom0 and seeing the issue during boot, or are you doing
>>> something specific?
>>>
>>> .
>>>
>>
>> I directly tested the mainline kernel with defconfig.
>> And the 5.5-rc5 kernel booting log is as below:
>>
>>      root@ubuntu:~# dmesg | more
>>      [    0.000000] Booting Linux on physical CPU 0x0000000000 
>> [0x481fd010]
>>      [    0.000000] Linux version 5.5.0-rc5 (joyx@Turing-Arch-b) (gcc 
>> version 4.9.1 2
>>      0140505 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.05 - 
>> Linaro GCC 4.9-20
>>      14.05)) #132 SMP PREEMPT Tue Jan 7 15:43:06 CST 2020
>>      [    0.000000] Xen XEN_VERSION.XEN_SUBVERSION support found
>>      [    0.000000] efi: Getting EFI parameters from FDT:
>>      [    0.000000] efi: EFI v2.50 by Xen
>>      [    0.000000] efi:  ACPI 2.0=0x181d0e70
>>      [    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
>>      [    0.000000] ACPI: Early table checksum verification disabled
>>      [    0.000000] ACPI: RSDP 0x00000000181D0E70 000024 (v02 HISI  )
>>      [    0.000000] ACPI: XSDT 0x00000000181D0DB0 0000BC (v01 HISI 
>> HIP08    0000000
>>      0      01000013)
>
> Is that the full log from Linux? If not, can you post it in full?
>
>>
>> But to boot with ACPI on our hardware, except above change I have 
>> also done some hacking based on
>> XEN 4.13 as below:
>
> I haven't booted Xen on any ACPI systems recently so there might be 
> bugs in the code. Your changes below is definitely a call to look more 
> into details what's wrong.
>

Yes, my target is to make Xen booting with ACPI firstly.

>>
>>      diff --git a/xen/arch/arm/traps.c b/xen/arch/arm/traps.c
>>      index d028ec9..215a291 100644
>>      --- a/xen/arch/arm/traps.c
>>      +++ b/xen/arch/arm/traps.c
>>      @@ -1856,8 +1856,8 @@ static bool try_map_mmio(gfn_t gfn)
>>               return false;
>>
>>           /* The hardware domain can only map permitted MMIO regions */
>>      -    if ( !iomem_access_permitted(d, mfn_x(mfn), mfn_x(mfn) + 1) )
>>      -        return false;
>>      +    /* if ( !iomem_access_permitted(d, mfn_x(mfn), mfn_x(mfn) + 
>> 1) ) */
>>      +    /*     return false; */
>
> Dom0 should be able to map nearly all the address space through this 
> function. The only thing not allowed is the GIC and UART (see 
> acpi_iomem_deny_access).
>
> So why do you want this change? What sort of address Dom0 is trying to 
> map and fail?

Yes, it is the UART address 0x3f00002f8.
Without this, during DOM0 UART initialization, the mem_serial_in in the 
kernel side will be failed and reported a unhandled fault at 
0xffff80001006d2f9(gva)
because of mem abort.
The Xen printed "HSR=0x930100005 pc=0xffff800010645d94 
gva=0xffff80001006d2f9 gpa=0x000003f00002f9" in traps.c.

>
>>
>>           return !map_regions_p2mt(d, gfn, 1, mfn, p2m_mmio_direct_c);
>>       }
>>
>>
>>      diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
>>      index 4d6c971..c626f9e 100644
>>      --- a/xen/arch/arm/mm.c
>>      +++ b/xen/arch/arm/mm.c
>>      @@ -1095,7 +1095,7 @@ static bool xen_pt_check_entry(lpae_t 
>> entry, mfn_t mfn, unsigned int flags)
>>               {
>>                   mm_printk("Changing MFN for a valid entry is not 
>> allowed (%#"PRI_mfn" -> %#"PRI_mfn").\n",
>>                             mfn_x(lpae_get_mfn(entry)), mfn_x(mfn));
>>      -            return false;
>>      +            return true;
>
> There is a pretty good reason to prevent modifying the MFN on a valid 
> entry. Indeed, the PT code is not handling of the Break-Before-Make 
> sequence (requires when updating certain entry) as this is a can of 
> worms.
>
> However, during my testing I never found a place where an valid entry 
> is modified (other than the permissions part). So can you give more 
> details how you came up here?

In the full log, I found the RSDP(0x39de0) replaced by XSDT(0x39dd0).
But I did not know why :(

>
>>               }
>>           }
>>           /* Sanity check when removing a page. */
>>
>>
>>      diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
>>      index 3c899cd..1e83351 100644
>>      --- a/xen/arch/arm/setup.c
>>      +++ b/xen/arch/arm/setup.c
>>      @@ -852,7 +852,8 @@ void __init start_xen(unsigned long 
>> boot_phys_offset,
>>           else
>>           {
>>               printk("Booting using ACPI\n");
>>      -        device_tree_flattened = NULL;
>>      +        device_tree_flattened = relocate_fdt(fdt_paddr, fdt_size);
>>      +        dt_unflatten_host_device_tree();
>
> When using ACPI, the DT should not be used. So why do you need this?

I have tried not passing DT with grub-2.04 but also to load DOM0 kernel.
The log is as below:

     (XEN) *** LOADING DOMAIN 0 ***
     (XEN) Loading d0 kernel from boot module @ 0000000016221000
     (XEN) Allocating 1:1 mappings totalling 4096MB for dom0:
     (XEN) BANK[0] 0x00000008000000-0x00000010000000 (128MB)
     (XEN) BANK[1] 0x00000020000000-0x00000038000000 (384MB)
     (XEN) BANK[2] 0x00000050000000-0x00000080000000 (768MB)
     (XEN) BANK[3] 0x00202000000000-0x00202080000000 (2048MB)
     (XEN) BANK[4] 0x002020b0000000-0x002020c0000000 (256MB)
     (XEN) BANK[5] 0x00202600000000-0x00202620000000 (512MB)
     (XEN) Grant table range: 0x000000181da000-0x0000001821a000
     (XEN) Allocating PPI 16 for event channel interrupt
     (XEN) Loading zImage from 0000000016221000 to 
0000000008080000-00000000099caa00
     (XEN) Loading d0 DTB to 0x000000000fe00000-0x000000000fe0025b
     (XEN) Initial low memory virq threshold set at 0x4000 pages.
     (XEN) Scrubbing Free RAM in background
     (XEN) Std. Loglevel: All
     (XEN) Guest Loglevel: All
     (XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch 
input)
     (XEN) Data Abort Trap. Syndrome=0x6
     (XEN) Walking Hypervisor VA 0x38 on CPU0 via TTBR 0x000000001831a000
     (XEN) 0TH[0x0] = 0x000000001831df7f
     (XEN) 1ST[0x0] = 0x000000001831bf7f
     (XEN) 2ND[0x0] = 0x0000000000000000
     (XEN) CPU0: Unexpected Trap: Data Abort
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     00000000002c6398 create_domUs+0x20/0x208
     (XEN) LR:     00000000002c6398
     (XEN) SP:     0000000000307d60
     (XEN) CPSR:   60000249 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 0000000000000000  X1: 0000000000000003  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 0000000000000000  X5: 
0000000000000024
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002871b8 X14: 
0000000000000020
     (XEN)     X15: 00000000004002f8 X16: 00000000002b2000 X17: 
00000000002b2000
     (XEN)     X18: 00000000002b2000 X19: 000080662f3d7000 X20: 
00000000002b1480
     (XEN)     X21: 0000000000348430 X22: 0000000000000080 X23: 
00000000002a4240
     (XEN)     X24: 0000000000000080 X25: 0000000000348000 X26: 
00000000002e9078
     (XEN)     X27: 000020279c000000 X28: 00000000002e83f0  FP: 
0000000000307d60
     (XEN)
     (XEN)   VTCR_EL2: 800d3590
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 000000001831a000
     (XEN)
     (XEN)    ESR_EL2: 96000006
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000038
     (XEN)
     (XEN) Xen stack trace from sp=0000000000307d60:
     (XEN)    0000000000307de0 00000000002cb5f0 000080662f3d7000 
00000000002b1480
     (XEN)    0000000000348430 0000000000000080 00000000002a4240 
0000000000000080
     (XEN)    0000000080000000 6d681f6762736876 0000000000307dc0 
00000000002bc570
     (XEN)    0000000000307de0 00000000002cb5e0 000080662f3d7000 
00000000002b1480
     (XEN)    000000003f14a780 00000000002001b8 00000000181da000 
0000000017fda000
     (XEN)    000000001a637000 0000000000000000 00000000004002f8 
000000001828cdc8
     (XEN)    0000000000001500 0000000000000001 0000000000000001 
000000001828cdc0
     (XEN)    0000000000000000 0000000000003000 000000001a637000 
0000003700000000
     (XEN)    0000000000000000 0000000f86db1000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000008000000000 
00000040ffffffff
     (XEN)    00000002ffffffff 0000000000000280 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<00000000002c6398>] create_domUs+0x20/0x208 (PC)
     (XEN)    [<00000000002c6398>] create_domUs+0x20/0x208 (LR)
     (XEN)    [<00000000002cb5f0>] start_xen+0xc34/0xcbc
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) debugtrace_dump() global buffer starting
     1 cpupool_add_domain(dom=0,pool=0) n_dom 1 rc 0
     (XEN) wrap: 0
     (XEN) debugtrace_dump() global buffer finished
     (XEN)
     (XEN) ****************************************
     (XEN) Panic on CPU 0:
     (XEN) CPU0: Unexpected Trap: Data Abort
     (XEN) ****************************************
     (XEN)
     (XEN) Reboot in five seconds...


So I passed DT to the Xen with grub-2.02 and hacked above code because 
in the create_domUs
will report a bug if chosen node  can not be find.

Thanks!

Best Regards,
Wei

>
> Cheers,
>
Julien Grall Jan. 7, 2020, 10:51 a.m. UTC | #8
On 07/01/2020 09:28, Wei Xu wrote:
> Hi Julien,
> 
> On 2020/1/7 17:10, Julien Grall wrote:
>>
>>
>> On 07/01/2020 08:39, Wei Xu wrote:
>>> Hi Stefano,
>>>
>>> On 2020/1/7 6:01, Stefano Stabellini wrote:
>>>> On Sat, 28 Dec 2019, Wei Xu wrote:
>>>>> Hi Julien,
>>>>>
>>>>> On 2019/12/28 16:09, Julien Grall wrote:
>>>>>> Hi,
>>>>>>
>>>>>> On 28/12/2019 03:08, Wei Xu wrote:
>>>>>>> This patch fixes the typo about the active status range of an IRQ
>>>>>>> via GICD. Otherwise it will be failed to handle the mmio access and
>>>>>>> inject a data abort.
>>>>>> I have seen a patch similar from NXP a month ago and I disagreed 
>>>>>> on the
>>>>>> approach.
>>>>>>
>>>>>> If you look at the context you modifed, it says that reading 
>>>>>> ACTIVER is not
>>>>>> supported. While I agree the behavior is not consistent accross 
>>>>>> ACTIVER,
>>>>>> injecting a data abort is a perfectly fine behavior to me (though 
>>>>>> not spec
>>>>>> compliant) as we don't implement the registers correctly.
>>>>>>
>>>>>> I guess you are sending this patch, because you tried Linux 5.4 
>>>>>> (or later)
>>>>>> on Xen, right? Linux has recently began to read ACTIVER to check 
>>>>>> whether an
>>>>>> IRQ is active at the HW level during the synchronizing of the 
>>>>>> IRQS. From my
>>>>>> understanding, this is used because there is a window where the 
>>>>>> interrupt is
>>>>>> active at the HW level but the Linux IRQ subsystem is not aware of 
>>>>>> it.
>>>>>>
>>>>>> While the patch below will allow Linux 5.4 to not crash, it is not 
>>>>>> going to
>>>>>> make it fly very far because of the above. So I am rather not 
>>>>>> happy with
>>>>>> persuing with returning 0.
>>>>>>
>>>>> Yes, I am using Linux 5.5-rc2 :)
>>>>> Got it and thanks for the explanation.
>>>>> I am not insistent on this and OK to wait for the update.
>>>>> Thanks and have a very happy new year!
>>>> Hi Wei,
>>>>
>>>> what do you do to reproduce the issue? Are you just booting Linux
>>>> 5.5-rc2 as dom0 and seeing the issue during boot, or are you doing
>>>> something specific?
>>>>
>>>> .
>>>>
>>>
>>> I directly tested the mainline kernel with defconfig.
>>> And the 5.5-rc5 kernel booting log is as below:
>>>
>>>      root@ubuntu:~# dmesg | more
>>>      [    0.000000] Booting Linux on physical CPU 0x0000000000 
>>> [0x481fd010]
>>>      [    0.000000] Linux version 5.5.0-rc5 (joyx@Turing-Arch-b) (gcc 
>>> version 4.9.1 2
>>>      0140505 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.05 - 
>>> Linaro GCC 4.9-20
>>>      14.05)) #132 SMP PREEMPT Tue Jan 7 15:43:06 CST 2020
>>>      [    0.000000] Xen XEN_VERSION.XEN_SUBVERSION support found
>>>      [    0.000000] efi: Getting EFI parameters from FDT:
>>>      [    0.000000] efi: EFI v2.50 by Xen
>>>      [    0.000000] efi:  ACPI 2.0=0x181d0e70
>>>      [    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
>>>      [    0.000000] ACPI: Early table checksum verification disabled
>>>      [    0.000000] ACPI: RSDP 0x00000000181D0E70 000024 (v02 HISI  )
>>>      [    0.000000] ACPI: XSDT 0x00000000181D0DB0 0000BC (v01 HISI 
>>> HIP08    0000000
>>>      0      01000013)
>>
>> Is that the full log from Linux? If not, can you post it in full?
> 
> I will reply the other questions in another mail since the below log is 
> too big.

Maybe I am missing something, but Linux seems to be running fine and I 
can't spot any error related to read the active status register. By any 
chance, did you build Xen with your patch?

Cheers,
Wei Xu Jan. 7, 2020, 10:56 a.m. UTC | #9
Hi Julien,

On 2020/1/7 18:51, Julien Grall wrote:
>
>
> On 07/01/2020 09:28, Wei Xu wrote:
>> Hi Julien,
>>
>> On 2020/1/7 17:10, Julien Grall wrote:
>>>
>>>
>>> On 07/01/2020 08:39, Wei Xu wrote:
>>>> Hi Stefano,
>>>>
>>>> On 2020/1/7 6:01, Stefano Stabellini wrote:
>>>>> On Sat, 28 Dec 2019, Wei Xu wrote:
>>>>>> Hi Julien,
>>>>>>
>>>>>> On 2019/12/28 16:09, Julien Grall wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> On 28/12/2019 03:08, Wei Xu wrote:
>>>>>>>> This patch fixes the typo about the active status range of an IRQ
>>>>>>>> via GICD. Otherwise it will be failed to handle the mmio access 
>>>>>>>> and
>>>>>>>> inject a data abort.
>>>>>>> I have seen a patch similar from NXP a month ago and I disagreed 
>>>>>>> on the
>>>>>>> approach.
>>>>>>>
>>>>>>> If you look at the context you modifed, it says that reading 
>>>>>>> ACTIVER is not
>>>>>>> supported. While I agree the behavior is not consistent accross 
>>>>>>> ACTIVER,
>>>>>>> injecting a data abort is a perfectly fine behavior to me 
>>>>>>> (though not spec
>>>>>>> compliant) as we don't implement the registers correctly.
>>>>>>>
>>>>>>> I guess you are sending this patch, because you tried Linux 5.4 
>>>>>>> (or later)
>>>>>>> on Xen, right? Linux has recently began to read ACTIVER to check 
>>>>>>> whether an
>>>>>>> IRQ is active at the HW level during the synchronizing of the 
>>>>>>> IRQS. From my
>>>>>>> understanding, this is used because there is a window where the 
>>>>>>> interrupt is
>>>>>>> active at the HW level but the Linux IRQ subsystem is not aware 
>>>>>>> of it.
>>>>>>>
>>>>>>> While the patch below will allow Linux 5.4 to not crash, it is 
>>>>>>> not going to
>>>>>>> make it fly very far because of the above. So I am rather not 
>>>>>>> happy with
>>>>>>> persuing with returning 0.
>>>>>>>
>>>>>> Yes, I am using Linux 5.5-rc2 :)
>>>>>> Got it and thanks for the explanation.
>>>>>> I am not insistent on this and OK to wait for the update.
>>>>>> Thanks and have a very happy new year!
>>>>> Hi Wei,
>>>>>
>>>>> what do you do to reproduce the issue? Are you just booting Linux
>>>>> 5.5-rc2 as dom0 and seeing the issue during boot, or are you doing
>>>>> something specific?
>>>>>
>>>>> .
>>>>>
>>>>
>>>> I directly tested the mainline kernel with defconfig.
>>>> And the 5.5-rc5 kernel booting log is as below:
>>>>
>>>>      root@ubuntu:~# dmesg | more
>>>>      [    0.000000] Booting Linux on physical CPU 0x0000000000 
>>>> [0x481fd010]
>>>>      [    0.000000] Linux version 5.5.0-rc5 (joyx@Turing-Arch-b) 
>>>> (gcc version 4.9.1 2
>>>>      0140505 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.05 - 
>>>> Linaro GCC 4.9-20
>>>>      14.05)) #132 SMP PREEMPT Tue Jan 7 15:43:06 CST 2020
>>>>      [    0.000000] Xen XEN_VERSION.XEN_SUBVERSION support found
>>>>      [    0.000000] efi: Getting EFI parameters from FDT:
>>>>      [    0.000000] efi: EFI v2.50 by Xen
>>>>      [    0.000000] efi:  ACPI 2.0=0x181d0e70
>>>>      [    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
>>>>      [    0.000000] ACPI: Early table checksum verification disabled
>>>>      [    0.000000] ACPI: RSDP 0x00000000181D0E70 000024 (v02 HISI  )
>>>>      [    0.000000] ACPI: XSDT 0x00000000181D0DB0 0000BC (v01 HISI 
>>>> HIP08    0000000
>>>>      0      01000013)
>>>
>>> Is that the full log from Linux? If not, can you post it in full?
>>
>> I will reply the other questions in another mail since the below log 
>> is too big.
>
> Maybe I am missing something, but Linux seems to be running fine and I 
> can't spot any error related to read the active status register. By 
> any chance, did you build Xen with your patch?
>

Yes, I built Xen with my patch.

Best Regards,
Wei

> Cheers,
>
Julien Grall Jan. 7, 2020, 11:13 a.m. UTC | #10
On 07/01/2020 10:56, Wei Xu wrote:
>> Maybe I am missing something, but Linux seems to be running fine and I 
>> can't spot any error related to read the active status register. By 
>> any chance, did you build Xen with your patch?
>>
> 
> Yes, I built Xen with my patch.

The reason I asked the log is to see what is the splat you receive from 
Linux without your patch. So can you send the splat you have without 
your patch?

Cheers,
Julien Grall Jan. 7, 2020, 11:42 a.m. UTC | #11
Hi,

On 07/01/2020 09:48, Wei Xu wrote:
> On 2020/1/7 17:10, Julien Grall wrote:
>>
>>
>> On 07/01/2020 08:39, Wei Xu wrote:
>>> Hi Stefano,
>>>
>>> On 2020/1/7 6:01, Stefano Stabellini wrote:
>>>> On Sat, 28 Dec 2019, Wei Xu wrote:
>>>>> Hi Julien,
>>>>>
>>>>> On 2019/12/28 16:09, Julien Grall wrote:
>>>>>> Hi,
>>>>>>
>>>>>> On 28/12/2019 03:08, Wei Xu wrote:
>>>>>>> This patch fixes the typo about the active status range of an IRQ
>>>>>>> via GICD. Otherwise it will be failed to handle the mmio access and
>>>>>>> inject a data abort.
>>>>>> I have seen a patch similar from NXP a month ago and I disagreed 
>>>>>> on the
>>>>>> approach.
>>>>>>
>>>>>> If you look at the context you modifed, it says that reading 
>>>>>> ACTIVER is not
>>>>>> supported. While I agree the behavior is not consistent accross 
>>>>>> ACTIVER,
>>>>>> injecting a data abort is a perfectly fine behavior to me (though 
>>>>>> not spec
>>>>>> compliant) as we don't implement the registers correctly.
>>>>>>
>>>>>> I guess you are sending this patch, because you tried Linux 5.4 
>>>>>> (or later)
>>>>>> on Xen, right? Linux has recently began to read ACTIVER to check 
>>>>>> whether an
>>>>>> IRQ is active at the HW level during the synchronizing of the 
>>>>>> IRQS. From my
>>>>>> understanding, this is used because there is a window where the 
>>>>>> interrupt is
>>>>>> active at the HW level but the Linux IRQ subsystem is not aware of 
>>>>>> it.
>>>>>>
>>>>>> While the patch below will allow Linux 5.4 to not crash, it is not 
>>>>>> going to
>>>>>> make it fly very far because of the above. So I am rather not 
>>>>>> happy with
>>>>>> persuing with returning 0.
>>>>>>
>>>>> Yes, I am using Linux 5.5-rc2 :)
>>>>> Got it and thanks for the explanation.
>>>>> I am not insistent on this and OK to wait for the update.
>>>>> Thanks and have a very happy new year!
>>>> Hi Wei,
>>>>
>>>> what do you do to reproduce the issue? Are you just booting Linux
>>>> 5.5-rc2 as dom0 and seeing the issue during boot, or are you doing
>>>> something specific?
>>>>
>>>> .
>>>>
>>>
>>> I directly tested the mainline kernel with defconfig.
>>> And the 5.5-rc5 kernel booting log is as below:
>>>
>>>      root@ubuntu:~# dmesg | more
>>>      [    0.000000] Booting Linux on physical CPU 0x0000000000 
>>> [0x481fd010]
>>>      [    0.000000] Linux version 5.5.0-rc5 (joyx@Turing-Arch-b) (gcc 
>>> version 4.9.1 2
>>>      0140505 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.05 - 
>>> Linaro GCC 4.9-20
>>>      14.05)) #132 SMP PREEMPT Tue Jan 7 15:43:06 CST 2020
>>>      [    0.000000] Xen XEN_VERSION.XEN_SUBVERSION support found
>>>      [    0.000000] efi: Getting EFI parameters from FDT:
>>>      [    0.000000] efi: EFI v2.50 by Xen
>>>      [    0.000000] efi:  ACPI 2.0=0x181d0e70
>>>      [    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
>>>      [    0.000000] ACPI: Early table checksum verification disabled
>>>      [    0.000000] ACPI: RSDP 0x00000000181D0E70 000024 (v02 HISI  )
>>>      [    0.000000] ACPI: XSDT 0x00000000181D0DB0 0000BC (v01 HISI 
>>> HIP08    0000000
>>>      0      01000013)
>>
>> Is that the full log from Linux? If not, can you post it in full?
>>
>>>
>>> But to boot with ACPI on our hardware, except above change I have 
>>> also done some hacking based on
>>> XEN 4.13 as below:
>>
>> I haven't booted Xen on any ACPI systems recently so there might be 
>> bugs in the code. Your changes below is definitely a call to look more 
>> into details what's wrong.
>>
> 
> Yes, my target is to make Xen booting with ACPI firstly.
> 
>>>
>>>      diff --git a/xen/arch/arm/traps.c b/xen/arch/arm/traps.c
>>>      index d028ec9..215a291 100644
>>>      --- a/xen/arch/arm/traps.c
>>>      +++ b/xen/arch/arm/traps.c
>>>      @@ -1856,8 +1856,8 @@ static bool try_map_mmio(gfn_t gfn)
>>>               return false;
>>>
>>>           /* The hardware domain can only map permitted MMIO regions */
>>>      -    if ( !iomem_access_permitted(d, mfn_x(mfn), mfn_x(mfn) + 1) )
>>>      -        return false;
>>>      +    /* if ( !iomem_access_permitted(d, mfn_x(mfn), mfn_x(mfn) + 
>>> 1) ) */
>>>      +    /*     return false; */
>>
>> Dom0 should be able to map nearly all the address space through this 
>> function. The only thing not allowed is the GIC and UART (see 
>> acpi_iomem_deny_access).
>>
>> So why do you want this change? What sort of address Dom0 is trying to 
>> map and fail?
> 
> Yes, it is the UART address 0x3f00002f8.
> Without this, during DOM0 UART initialization, the mem_serial_in in the 
> kernel side will be failed and reported a unhandled fault at 
> 0xffff80001006d2f9(gva)
> because of mem abort.
> The Xen printed "HSR=0x930100005 pc=0xffff800010645d94 
> gva=0xffff80001006d2f9 gpa=0x000003f00002f9" in traps.c.

I assume this is your primary address as specified in the SPCR, right?

As only one entity should manage the UART (i.e Xen or Dom0), we today 
assume this will be managed by Xen. Xen should expose a partial virtual 
UART (only a few registers are emulating) to dom0 in replacement.

This is usually done by the UART driver. Looking at the log you pasted 
in a separate e-mail:

(XEN) Platform: Generic System
(XEN) Unable to initialize acpi uart: -9
(XEN) Bad console= option 'dtuart'

So Xen didn't manage to initialize the uart. The -9 suggests, Xen didn't 
find a driver for your UART. At the moment, Xen is only able to detect 
pl011, sbsa, sbsa32 UART for ACPI. What is the type of the UART used on 
your platform?

> 
>>
>>>
>>>           return !map_regions_p2mt(d, gfn, 1, mfn, p2m_mmio_direct_c);
>>>       }
>>>
>>>
>>>      diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
>>>      index 4d6c971..c626f9e 100644
>>>      --- a/xen/arch/arm/mm.c
>>>      +++ b/xen/arch/arm/mm.c
>>>      @@ -1095,7 +1095,7 @@ static bool xen_pt_check_entry(lpae_t 
>>> entry, mfn_t mfn, unsigned int flags)
>>>               {
>>>                   mm_printk("Changing MFN for a valid entry is not 
>>> allowed (%#"PRI_mfn" -> %#"PRI_mfn").\n",
>>>                             mfn_x(lpae_get_mfn(entry)), mfn_x(mfn));
>>>      -            return false;
>>>      +            return true;
>>
>> There is a pretty good reason to prevent modifying the MFN on a valid 
>> entry. Indeed, the PT code is not handling of the Break-Before-Make 
>> sequence (requires when updating certain entry) as this is a can of 
>> worms.
>>
>> However, during my testing I never found a place where an valid entry 
>> is modified (other than the permissions part). So can you give more 
>> details how you came up here?
> 
> In the full log, I found the RSDP(0x39de0) replaced by XSDT(0x39dd0).
> But I did not know why :(

On Arm, we requires the fixmap to be empty (by calling clear_fixmap()) 
before the fixmap can used for a different mapping.

Looking at the implementation of acpi_os_unmap_memory(), the fixmap is 
not cleared and hence why you see the warning about changing the MFN on 
valid entry.

IHMO, acpi_os_unmap_memory() ought to clear the fixmap. This will make 
it a much saner interface to use. Would you mind to have a look?

> 
>>
>>>               }
>>>           }
>>>           /* Sanity check when removing a page. */
>>>
>>>
>>>      diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
>>>      index 3c899cd..1e83351 100644
>>>      --- a/xen/arch/arm/setup.c
>>>      +++ b/xen/arch/arm/setup.c
>>>      @@ -852,7 +852,8 @@ void __init start_xen(unsigned long 
>>> boot_phys_offset,
>>>           else
>>>           {
>>>               printk("Booting using ACPI\n");
>>>      -        device_tree_flattened = NULL;
>>>      +        device_tree_flattened = relocate_fdt(fdt_paddr, fdt_size);
>>>      +        dt_unflatten_host_device_tree();
>>
>> When using ACPI, the DT should not be used. So why do you need this?
> 
> I have tried not passing DT with grub-2.04 but also to load DOM0 kernel.
> The log is as below:
> 
>      (XEN) *** LOADING DOMAIN 0 ***
>      (XEN) Loading d0 kernel from boot module @ 0000000016221000
>      (XEN) Allocating 1:1 mappings totalling 4096MB for dom0:
>      (XEN) BANK[0] 0x00000008000000-0x00000010000000 (128MB)
>      (XEN) BANK[1] 0x00000020000000-0x00000038000000 (384MB)
>      (XEN) BANK[2] 0x00000050000000-0x00000080000000 (768MB)
>      (XEN) BANK[3] 0x00202000000000-0x00202080000000 (2048MB)
>      (XEN) BANK[4] 0x002020b0000000-0x002020c0000000 (256MB)
>      (XEN) BANK[5] 0x00202600000000-0x00202620000000 (512MB)
>      (XEN) Grant table range: 0x000000181da000-0x0000001821a000
>      (XEN) Allocating PPI 16 for event channel interrupt
>      (XEN) Loading zImage from 0000000016221000 to 
> 0000000008080000-00000000099caa00
>      (XEN) Loading d0 DTB to 0x000000000fe00000-0x000000000fe0025b
>      (XEN) Initial low memory virq threshold set at 0x4000 pages.
>      (XEN) Scrubbing Free RAM in background
>      (XEN) Std. Loglevel: All
>      (XEN) Guest Loglevel: All
>      (XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch 
> input)
>      (XEN) Data Abort Trap. Syndrome=0x6
>      (XEN) Walking Hypervisor VA 0x38 on CPU0 via TTBR 0x000000001831a000
>      (XEN) 0TH[0x0] = 0x000000001831df7f
>      (XEN) 1ST[0x0] = 0x000000001831bf7f
>      (XEN) 2ND[0x0] = 0x0000000000000000
>      (XEN) CPU0: Unexpected Trap: Data Abort
>      (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
>      (XEN) CPU:    0
>      (XEN) PC:     00000000002c6398 create_domUs+0x20/0x208
>      (XEN) LR:     00000000002c6398
>      (XEN) SP:     0000000000307d60
>      (XEN) CPSR:   60000249 MODE:64-bit EL2h (Hypervisor, handler)
>      (XEN)      X0: 0000000000000000  X1: 0000000000000003  X2: 
> 0000000000000000
>      (XEN)      X3: 0000000000000000  X4: 0000000000000000  X5: 
> 0000000000000024
>      (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
> 7f7f7f7f7f7f7f7f
>      (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
> 0101010101010101
>      (XEN)     X12: 0000000000000008 X13: 00000000002871b8 X14: 
> 0000000000000020
>      (XEN)     X15: 00000000004002f8 X16: 00000000002b2000 X17: 
> 00000000002b2000
>      (XEN)     X18: 00000000002b2000 X19: 000080662f3d7000 X20: 
> 00000000002b1480
>      (XEN)     X21: 0000000000348430 X22: 0000000000000080 X23: 
> 00000000002a4240
>      (XEN)     X24: 0000000000000080 X25: 0000000000348000 X26: 
> 00000000002e9078
>      (XEN)     X27: 000020279c000000 X28: 00000000002e83f0  FP: 
> 0000000000307d60
>      (XEN)
>      (XEN)   VTCR_EL2: 800d3590
>      (XEN)  VTTBR_EL2: 0000000000000000
>      (XEN)
>      (XEN)  SCTLR_EL2: 30cd183d
>      (XEN)    HCR_EL2: 000000008000003a
>      (XEN)  TTBR0_EL2: 000000001831a000
>      (XEN)
>      (XEN)    ESR_EL2: 96000006
>      (XEN)  HPFAR_EL2: 0000000000000000
>      (XEN)    FAR_EL2: 0000000000000038
>      (XEN)
>      (XEN) Xen stack trace from sp=0000000000307d60:
>      (XEN)    0000000000307de0 00000000002cb5f0 000080662f3d7000 
> 00000000002b1480
>      (XEN)    0000000000348430 0000000000000080 00000000002a4240 
> 0000000000000080
>      (XEN)    0000000080000000 6d681f6762736876 0000000000307dc0 
> 00000000002bc570
>      (XEN)    0000000000307de0 00000000002cb5e0 000080662f3d7000 
> 00000000002b1480
>      (XEN)    000000003f14a780 00000000002001b8 00000000181da000 
> 0000000017fda000
>      (XEN)    000000001a637000 0000000000000000 00000000004002f8 
> 000000001828cdc8
>      (XEN)    0000000000001500 0000000000000001 0000000000000001 
> 000000001828cdc0
>      (XEN)    0000000000000000 0000000000003000 000000001a637000 
> 0000003700000000
>      (XEN)    0000000000000000 0000000f86db1000 0000000000000000 
> 0000000000000000
>      (XEN)    0000000000000000 0000000300000000 0000008000000000 
> 00000040ffffffff
>      (XEN)    00000002ffffffff 0000000000000280 0000000000000000 
> 0000000000000000
>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
> 0000000000000000
>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
> 0000000000000000
>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
> 0000000000000000
>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
> 0000000000000000
>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
> 0000000000000000
>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
> 0000000000000000
>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
> 0000000000000000
>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
> 0000000000000000
>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
> 0000000000000000
>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
> 0000000000000000
>      (XEN) Xen call trace:
>      (XEN)    [<00000000002c6398>] create_domUs+0x20/0x208 (PC)
>      (XEN)    [<00000000002c6398>] create_domUs+0x20/0x208 (LR)
>      (XEN)    [<00000000002cb5f0>] start_xen+0xc34/0xcbc
>      (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
>      (XEN)
>      (XEN) debugtrace_dump() global buffer starting
>      1 cpupool_add_domain(dom=0,pool=0) n_dom 1 rc 0
>      (XEN) wrap: 0
>      (XEN) debugtrace_dump() global buffer finished
>      (XEN)
>      (XEN) ****************************************
>      (XEN) Panic on CPU 0:
>      (XEN) CPU0: Unexpected Trap: Data Abort
>      (XEN) ****************************************
>      (XEN)
>      (XEN) Reboot in five seconds...
> 
> 
> So I passed DT to the Xen with grub-2.02 and hacked above code because 
> in the create_domUs
> will report a bug if chosen node  can not be find.

The function is used for creating multiple domains at boot time from 
Xen. It is very DT centric at the moment, but ACPI platform may not come 
with a DT (though the EFI stub may create one ATM). I can see other 
issue with dom0less and ACPI, so I think it would be best to just not 
call the function when using ACPI. Could you try following patch (not 
tested nor compiled):

diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index 3c899cd4a0..3e9dc8fe9f 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -985,7 +985,8 @@ void __init start_xen(unsigned long boot_phys_offset,

      system_state = SYS_STATE_active;

-    create_domUs();
+    if ( !acpi_disabled )
+        create_domUs();

      domain_unpause_by_systemcontroller(dom0);

Cheers,
Wei Xu Jan. 7, 2020, 11:45 a.m. UTC | #12
Hi Julien,

On 2020/1/7 19:13, Julien Grall wrote:
>
>
> On 07/01/2020 10:56, Wei Xu wrote:
>>> Maybe I am missing something, but Linux seems to be running fine and 
>>> I can't spot any error related to read the active status register. 
>>> By any chance, did you build Xen with your patch?
>>>
>>
>> Yes, I built Xen with my patch.
>
> The reason I asked the log is to see what is the splat you receive 
> from Linux without your patch. So can you send the splat you have 
> without your patch?
>

Below is the log based on the ACPI booting hacking:
Thanks!

Best Regards,
Wei
---

     POST done.
     - UART enabled -
     - Boot CPU booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) Checking for initrd in /chosen
     (XEN) RAM: 0000000000000000 - 0000000010130fff
     (XEN) RAM: 0000000012a00000 - 0000000016256fff
     (XEN) RAM: 0000000017b5a000 - 0000000017c59fff
     (XEN) RAM: 0000000017c5a000 - 00000000181cdfff
     (XEN) RAM: 000000001849d000 - 000000001850ffff
     (XEN) RAM: 0000000018520000 - 0000000018523fff
     (XEN) RAM: 0000000018524000 - 0000000018524fff
     (XEN) RAM: 0000000018526000 - 0000000018526fff
     (XEN) RAM: 0000000018527000 - 0000000018528fff
     (XEN) RAM: 0000000018529000 - 000000001852ffff
     (XEN) RAM: 0000000018560000 - 000000001a324fff
     (XEN) RAM: 000000001a325000 - 000000001a326fff
     (XEN) RAM: 000000001a327000 - 000000001a549fff
     (XEN) RAM: 000000001a54a000 - 000000001a54dfff
     (XEN) RAM: 000000001a54e000 - 000000001a54ffff
     (XEN) RAM: 000000001a550000 - 000000001a557fff
     (XEN) RAM: 000000001a558000 - 000000001a558fff
     (XEN) RAM: 000000001a559000 - 000000001a610fff
     (XEN) RAM: 000000001a629000 - 000000001b8f1fff
     (XEN) RAM: 000000001b8f2000 - 000000001b903fff
     (XEN) RAM: 000000001b904000 - 00000000310a8fff
     (XEN) RAM: 00000000310a9000 - 00000000315dafff
     (XEN) RAM: 00000000315db000 - 00000000395dbfff
     (XEN) RAM: 00000000395dc000 - 000000003961ffff
     (XEN) RAM: 0000000039690000 - 0000000039692fff
     (XEN) RAM: 0000000039693000 - 00000000396affff
     (XEN) RAM: 0000000039750000 - 0000000039751fff
     (XEN) RAM: 0000000039752000 - 00000000397affff
     (XEN) RAM: 0000000039a10000 - 0000000039a4ffff
     (XEN) RAM: 0000000039af0000 - 0000000039af0fff
     (XEN) RAM: 0000000039af1000 - 0000000039b1ffff
     (XEN) RAM: 0000000039c60000 - 0000000039d0ffff
     (XEN) RAM: 0000000039d32000 - 0000000039d33fff
     (XEN) RAM: 0000000039d34000 - 0000000039d3ffff
     (XEN) RAM: 0000000039d41000 - 0000000039d41fff
     (XEN) RAM: 0000000039d42000 - 0000000039d4ffff
     (XEN) RAM: 0000000039d52000 - 0000000039d53fff
     (XEN) RAM: 0000000039d54000 - 0000000039d5ffff
     (XEN) RAM: 0000000039d72000 - 0000000039d72fff
     (XEN) RAM: 0000000039d73000 - 0000000039d7ffff
     (XEN) RAM: 0000000039d91000 - 0000000039d9ffff
     (XEN) RAM: 000000003a0f0000 - 000000003a0f0fff
     (XEN) RAM: 000000003a0f1000 - 000000003a0fafff
     (XEN) RAM: 000000003a0fc000 - 000000003a10ffff
     (XEN) RAM: 000000003a110000 - 000000003ef2ffff
     (XEN) RAM: 000000003ef30000 - 000000003ef30fff
     (XEN) RAM: 000000003ef31000 - 000000003f0bffff
     (XEN) RAM: 000000003f0c0000 - 000000003f0dffff
     (XEN) RAM: 000000003f110000 - 000000003f120fff
     (XEN) RAM: 000000003f121000 - 000000003f141fff
     (XEN) RAM: 000000003f142000 - 000000003f195fff
     (XEN) RAM: 000000003f196000 - 000000003fbcbfff
     (XEN) RAM: 000000003fbcc000 - 000000003fbf7fff
     (XEN) RAM: 000000003fbf8000 - 000000003fbfffff
     (XEN) RAM: 0000000050000000 - 000000007fffffff
     (XEN) RAM: 0000002080000000 - 00000027ffffffff
     (XEN) RAM: 0000202000000000 - 000020279bffffff
     (XEN)
     (XEN) MODULE[0]: 00000000181ce000 - 00000000183138f0 Xen
     (XEN) MODULE[1]: 000000001a613000 - 000000001a61e000 Device Tree
     (XEN) MODULE[2]: 0000000016257000 - 0000000017b58200 Kernel
     (XEN)
     (XEN) CMDLINE[0000000016257000]:chosen rdinit=/init acpi=force 
noinitrd root=/dev/sdb1 rw
     (XEN)
     (XEN) Command line: dom0_mem=4G acpi=force loglvl=all guest_loglvl=all
     (XEN) PFN compression on bits 26...32
     (XEN) ACPI: RSDP 39DE0000, 0024 (r2 HISI  )
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39de0 -> 0x39dd0).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffbc0
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000000047  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039dd0 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffbc0
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffbc0:
     (XEN)    00000000002ffc90 0000000000262ce0 0000000000402000 
0000000000001000
     (XEN)    0000000039dd0000 0000000000000024 00000000002e0078 
0000000000000000
     (XEN)    ffffffffffffffff 00000000002e1078 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 1f3171271f33312f 00000000002ffd00 
0000000000018306
     (XEN)    0000000000402000 0000000000000001 00000000002ffce0 
00000000002ffce0
     (XEN)    0000000000000000 0000000200000002 00000000002ffca0 
000000000027e72c
     (XEN)    00000000002ffce0 0000000000248f18 0000000000402000 
0000000000000001
     (XEN)    0000000039dd0000 0000000000000000 00000000002e0078 
00000000002b44b8
     (XEN)    00000000002ffd10 00000000002befec 0000000000402000 
0000000000000000
     (XEN)    00000000002ffd10 00000000002befe0 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002befec>] acpi_tb_parse_root_table+0x70/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39dd0 -> 0x39dd0).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffbc0
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 000000000000011f  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039dd0 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffbc0
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffbc0:
     (XEN)    00000000002ffc90 0000000000262ce0 00000000000000b4 
0000000000001000
     (XEN)    0000000039dd0000 00000000000000b4 00000000002e0078 
0000000000000000
     (XEN)    ffffffffffffffff 00000000002e1078 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 1f3171271f33312f 00000000002ffd00 
0000000000018306
     (XEN)    0000000000402000 0000000000000001 00000000002ffce0 
0040000039dd0f7f
     (XEN)    0000000000000000 0000000200000002 00000000002ffca0 
000000000027e72c
     (XEN)    00000000002ffce0 0000000000248f18 00000000000000b4 
0000000000000001
     (XEN)    0000000039dd0000 0000000000000000 00000000002e0078 
00000000002b44b8
     (XEN)    00000000002ffd10 00000000002bf030 00000000000000b4 
0000000000000000
     (XEN)    00000000002ffd10 00000000002bf018 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002bf030>] acpi_tb_parse_root_table+0xb4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39dd0 -> 0x39dd0).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffbc0
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 00000000000001f7  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039dd0 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffbc0
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffbc0:
     (XEN)    00000000002ffc90 0000000000262ce0 00000000000000b4 
0000000000001000
     (XEN)    0000000039dd0000 0000000000000024 00000000002e0078 
0000000000000000
     (XEN)    ffffffffffffffff 00000000002e1078 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 1f3171271f33312f 00000000002ffd00 
0000000000018306
     (XEN)    0000000000402000 0000000000000001 00000000002ffce0 
0040000039dd0f7f
     (XEN)    0000000000000000 0000000200000002 00000000002ffca0 
000000000027e72c
     (XEN)    00000000002ffce0 0000000000248f18 00000000000000b4 
0000000000000001
     (XEN)    0000000039dd0000 0000000000000008 00000000002e0078 
00000000002b44b8
     (XEN)    00000000002ffd10 00000000002bf0ac 00000000000000b4 
0000000000000000
     (XEN)    00000000002ffd10 00000000002bf2ac 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002bf0ac>] acpi_tb_parse_root_table+0x130/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: XSDT 39DD0000, 00B4 (r1 HISI   HIP08 0       1000013)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39dd0 -> 0x39dd0).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffbc0
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 00000000000002d2  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039dd0 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffbc0
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffbc0:
     (XEN)    00000000002ffc90 0000000000262ce0 0000000000402000 
0000000000001000
     (XEN)    0000000039dd0000 00000000000000b4 00000000002e0078 
0000000000000000
     (XEN)    00000000000000b4 00000000002e1078 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 301f1f1f1f1f1f1f 00000000002ffd00 
0000000000018306
     (XEN)    0000000000402000 0000000000000001 00000000002ffce0 
00000000002ffce0
     (XEN)    0000000000000000 0000000200000002 00000000002ffca0 
000000000027e72c
     (XEN)    00000000002ffce0 0000000000248f18 0000000000402000 
0000000000000001
     (XEN)    0000000039dd0000 0000000000000008 00000000002e0078 
00000000000000b4
     (XEN)    00000000002ffd10 00000000002bf110 0000000000402000 
0000000001000013
     (XEN)    00000000002ffd10 00000000002bf0d4 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002bf110>] acpi_tb_parse_root_table+0x194/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39dd0 -> 0x39920).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 00000000000003aa  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039920 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 0000000000000002 
0000000000001000
     (XEN)    0000000039920000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 00000007000000b4 0000000000000001 
0000000000000000
     (XEN)    0000000000000000 00000000002e1078 000020279c000000 
0000000000018306
     (XEN)    0000000000000007 0000000000000001 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 0000000000000002 
0000000039920000
     (XEN)    0000000000000002 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 0000000000000002 
0000000000000001
     (XEN)    0000000039dd0000 0000000000000008 00000000002ffd10 
00000000002bf250
     (XEN)    0000000000000040 0000000000000001 0000000000000002 
0000000000312000
     (XEN)    000000000029d458 00000000002bf210 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: FACP 39920000, 0114 (r6 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39920 -> 0x39920).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb90
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000000490  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039920 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb90
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb90:
     (XEN)    00000000002ffc60 0000000000262ce0 000080662fff9040 
0000000000001000
     (XEN)    0000000039920000 0000000000000114 000000000029d458 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 00000007002d8a70 0000000000000001 
2f311f485248471f
     (XEN)    0000000000000000 00000000002bee30 000080662fff9040 
0000000000018306
     (XEN)    00000000002ffca0 0000000000000001 00000000002ffc70 
00000000ffffffd8
     (XEN)    0000000000000000 0000000200000002 00000000002ffc70 
000000000027e72c
     (XEN)    00000000002ffcb0 0000000000248f18 000080662fff9040 
0000000000000114
     (XEN)    0000000000000114 0000000000000001 000000000029d458 
0000000000000000
     (XEN)    00000000002ffce0 00000000002bf5fc 000080662fff9040 
00000000002bef68
     (XEN)    00000000002ffd10 00000000002bf250 00000000002ffd10 
00000000002bf274
     (XEN)    000080662fff9040 0000000000000001 0000000000000002 
0000000000312000
     (XEN)    00000000002ffd60 00000000002bf88c 0000000000000000 
0000000000000080
     (XEN)    0000000000000000 0000000000000000 00000000002e0078 
00000000002b44b8
     (XEN)    ffffffffffffffff 00000000002e1078 00000000002ffd90 
00000000002c06e8
     (XEN)    000000020279c000 000020279c000000 000020279c000000 
00000000002e0410
     (XEN)    00000000002ffdc0 00000000002cf250 000000020279c000 
0000800000000000
     (XEN)    0000000202630000 000000000016c000 00000000002ffde0 
00000000002c9a94
     (XEN)    000000020279c000 00000000002b15c0 000000003f141790 
00000000002001b8
     (XEN)    00000000181ce000 0000000017fce000 000000001a613000 
0000000000000000
     (XEN)    00000000004002f8 000000001827fdb8 0000000000001560 
0000000000000001
     (XEN)    0000000000000001 000000001827fdb0 0000000000000000 
000000000000b000
     (XEN)    000000001a613000 0000003900000000 0000000000000000 
0000000f86ded000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000300000000
     (XEN)    0000000000000000 00000040ffffffff 00000000ffffffff 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002bf5fc>] acpi_tb_parse_fadt+0x38/0xbc
     (XEN)    [<00000000002bf274>] acpi_tb_parse_root_table+0x2f8/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39920 -> 0x39630).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb50
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000000571  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039630 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb50
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb50:
     (XEN)    00000000002ffc20 0000000000262ce0 0000000000000000 
0000000000001000
     (XEN)    0000000039630000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000114 0000000000000001 
0000000000000000
     (XEN)    0000000000000000 0000000000000012 000020279c000000 
0000000000018306
     (XEN)    0000000000000007 0000000000000001 0000000000000001 
2f311f485248471f
     (XEN)    0000000000000000 0000000200000002 00000000002ffc30 
000000000027e72c
     (XEN)    00000000002ffc70 0000000000248f18 0000000000000000 
0000000039630000
     (XEN)    0000000000000114 00000000002d1930 0000000000000001 
0000000000000000
     (XEN)    00000000002ffca0 00000000002beee8 0000000000000000 
00000000002bf618
     (XEN)    0000000000402000 0000000000000114 00000000002ffce0 
00000000002bf644
     (XEN)    0000000000402000 0000000000000114 0000000000000114 
0000000000000001
     (XEN)    000000000029d458 00000000002bf624 00000000002ffd10 
00000000002bf274
     (XEN)    000080662fff9040 0000000000000001 0000000000000002 
0000000000312000
     (XEN)    00000000002ffd60 00000000002bf88c 0000000000000000 
0000000000000080
     (XEN)    0000000000000000 0000000000000000 00000000002e0078 
00000000002b44b8
     (XEN)    ffffffffffffffff 00000000002e1078 00000000002ffd90 
00000000002c06e8
     (XEN)    000000020279c000 000020279c000000 000020279c000000 
00000000002e0410
     (XEN)    00000000002ffdc0 00000000002cf250 000000020279c000 
0000800000000000
     (XEN)    0000000202630000 000000000016c000 00000000002ffde0 
00000000002c9a94
     (XEN)    000000020279c000 00000000002b15c0 000000003f141790 
00000000002001b8
     (XEN)    00000000181ce000 0000000017fce000 000000001a613000 
0000000000000000
     (XEN)    00000000004002f8 000000001827fdb8 0000000000001560 
0000000000000001
     (XEN)    0000000000000001 000000001827fdb0 0000000000000000 
000000000000b000
     (XEN)    000000001a613000 0000003900000000 0000000000000000 
0000000f86ded000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000300000000
     (XEN)    0000000000000000 00000040ffffffff 00000000ffffffff 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf644>] acpi_tb_parse_fadt+0x80/0xbc
     (XEN)    [<00000000002bf274>] acpi_tb_parse_root_table+0x2f8/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: DSDT 39630000, A84D (r2 HISI   HIP08           0 INTL 
20181213)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39630 -> 0x39dc0).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000000660  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039dc0 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 0000000000000003 
0000000000001000
     (XEN)    0000000039dc0000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 00000007002bee30 0000000000000001 
0000000000000001
     (XEN)    0000000000000000 00000000002ffc70 00000000002ffc40 
0000000000018306
     (XEN)    00000000002ffc70 0000000000000001 00000000002ffc40 
00000000ffffffd8
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 0000000000000003 
0000000039dc0000
     (XEN)    0000000000000003 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 0000000000000003 
0000000000000114
     (XEN)    0000000000000114 0000000000000001 00000000002ffd10 
00000000002bf250
     (XEN)    0000000000000060 0000000000000001 0000000000000003 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: PCCT 39DC0000, 008A (r1 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39dc0 -> 0x39db0).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000000746  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039db0 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 0000000000000004 
0000000000001000
     (XEN)    0000000039db0000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff9060 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 0000000000000004 
0000000039db0000
     (XEN)    0000000000000004 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 0000000000000004 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    0000000000000080 0000000000000001 0000000000000004 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: SSDT 39DB0000, E56A (r2 HISI   HIP07           0 INTL 
20181213)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39db0 -> 0x39d80).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 000000000000082c  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039d80 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 0000000000000005 
0000000000001000
     (XEN)    0000000039d80000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f4b534d481f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff9080 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 0000000000000005 
0000000039d80000
     (XEN)    0000000000000005 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 0000000000000005 
0000000020181213
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    00000000000000a0 0000000000000001 0000000000000005 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: BERT 39D80000, 0030 (r1 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39d80 -> 0x39d60).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000000912  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039d60 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 0000000000000006 
0000000000001000
     (XEN)    0000000039d60000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff90a0 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 0000000000000006 
0000000039d60000
     (XEN)    0000000000000006 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 0000000000000006 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    00000000000000c0 0000000000000001 0000000000000006 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: HEST 39D60000, 058C (r1 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39d60 -> 0x39d20).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 00000000000009f8  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039d20 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 0000000000000007 
0000000000001000
     (XEN)    0000000039d20000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff90c0 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 0000000000000007 
0000000039d20000
     (XEN)    0000000000000007 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 0000000000000007 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    00000000000000e0 0000000000000001 0000000000000007 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: ERST 39D20000, 0230 (r1 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39d20 -> 0x39d10).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000000ade  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039d10 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 0000000000000008 
0000000000001000
     (XEN)    0000000039d10000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff90e0 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 0000000000000008 
0000000039d10000
     (XEN)    0000000000000008 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 0000000000000008 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    0000000000000100 0000000000000001 0000000000000008 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: EINJ 39D10000, 0170 (r1 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39d10 -> 0x39900).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000000bc4  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039900 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 0000000000000009 
0000000000001000
     (XEN)    0000000039900000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff9100 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 0000000000000009 
0000000039900000
     (XEN)    0000000000000009 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 0000000000000009 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    0000000000000120 0000000000000001 0000000000000009 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: GTDT 39900000, 0084 (r3 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39900 -> 0x39680).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000000caa  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039680 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 000000000000000a 
0000000000001000
     (XEN)    0000000039680000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff9120 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 000000000000000a 
0000000039680000
     (XEN)    000000000000000a 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 000000000000000a 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    0000000000000140 0000000000000001 000000000000000a 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: MCFG 39680000, 003C (r1 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39680 -> 0x39670).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000000d90  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039670 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 000000000000000b 
0000000000001000
     (XEN)    0000000039670000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff9140 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 000000000000000b 
0000000039670000
     (XEN)    000000000000000b 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 000000000000000b 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    0000000000000160 0000000000000001 000000000000000b 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: SLIT 39670000, 003C (r1 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39670 -> 0x39660).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000000e76  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039660 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 000000000000000c 
0000000000001000
     (XEN)    0000000039660000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff9160 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 000000000000000c 
0000000039660000
     (XEN)    000000000000000c 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 000000000000000c 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    0000000000000180 0000000000000001 000000000000000c 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: SPCR 39660000, 0050 (r2 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39660 -> 0x39650).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000000f5c  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039650 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 000000000000000d 
0000000000001000
     (XEN)    0000000039650000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff9180 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 000000000000000d 
0000000039650000
     (XEN)    000000000000000d 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 000000000000000d 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    00000000000001a0 0000000000000001 000000000000000d 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: SRAT 39650000, 09C0 (r3 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39650 -> 0x39640).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000001042  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039640 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 000000000000000e 
0000000000001000
     (XEN)    0000000039640000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff91a0 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 000000000000000e 
0000000039640000
     (XEN)    000000000000000e 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 000000000000000e 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    00000000000001c0 0000000000000001 000000000000000e 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: APIC 39640000, 286C (r4 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39640 -> 0x39620).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 0000000000001128  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039620 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 000000000000000f 
0000000000001000
     (XEN)    0000000039620000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff91c0 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 000000000000000f 
0000000039620000
     (XEN)    000000000000000f 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 000000000000000f 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    00000000000001e0 0000000000000001 000000000000000f 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: IORT 39620000, 1060 (r0 HISI   HIP08           0 INTL 
20181213)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x39620 -> 0x18540).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 000000000000120e  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000018540 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 0000000000000010 
0000000000001000
     (XEN)    0000000018540000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f4b534d481f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff91e0 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 0000000000000010 
0000000018540000
     (XEN)    0000000000000010 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 0000000000000010 
0000000020181213
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    0000000000000200 0000000000000001 0000000000000010 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: PPTT 18540000, 37E4 (r2 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x18540 -> 0x18550).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 00000000000012f4  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000018550 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 0000000000000011 
0000000000001000
     (XEN)    0000000018550000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff9200 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 0000000000000011 
0000000018550000
     (XEN)    0000000000000011 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 0000000000000011 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    0000000000000220 0000000000000001 0000000000000011 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: MPAM 18550000, 063C (r1 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x18550 -> 0x18530).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 00000000000013da  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000018530 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 0000000000000012 
0000000000001000
     (XEN)    0000000018530000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff9220 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 0000000000000012 
0000000018530000
     (XEN)    0000000000000012 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 0000000000000012 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    0000000000000240 0000000000000001 0000000000000012 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: SPMI 18530000, 0041 (r5 HISI   HIP08           0 HISI 
20151124)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x18530 -> 0x18510).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffb80
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 00000000000014c0  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000018510 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffb80
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffb80:
     (XEN)    00000000002ffc50 0000000000262ce0 0000000000000013 
0000000000001000
     (XEN)    0000000018510000 0000000000000024 0000000000000001 
0000000000000000
     (XEN)    0000000000000012 0000000000000012 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 0000000700000000 0000000000000001 
00000000002d8a70
     (XEN)    0000000000000000 2f311f485248471f 00000000002ffcc0 
0000000000018306
     (XEN)    000080662fff9240 0000000000000001 00000000002ffca0 
00000000002ffca0
     (XEN)    0000000000000000 0000000200000002 00000000002ffc60 
000000000027e72c
     (XEN)    00000000002ffca0 0000000000248f18 0000000000000013 
0000000018510000
     (XEN)    0000000000000013 0000000000000000 0000000000000001 
0000000000000000
     (XEN)    00000000002ffcd0 00000000002beee8 0000000000000013 
0000000020151124
     (XEN)    00000000002ffcd0 00000000002bef68 00000000002ffd10 
00000000002bf250
     (XEN)    0000000000000260 0000000000000001 0000000000000013 
0000000000312000
     (XEN)    000000000029d458 0000000000312000 00000000002ffd60 
00000000002bf88c
     (XEN)    0000000000000000 0000000000000080 0000000000000000 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 ffffffffffffffff 
00000000002e1078
     (XEN)    00000000002ffd90 00000000002c06e8 000000020279c000 
000020279c000000
     (XEN)    000020279c000000 00000000002e0410 00000000002ffdc0 
00000000002cf250
     (XEN)    000000020279c000 0000800000000000 0000000202630000 
000000000016c000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002beee8>] acpi_tb_install_table+0x50/0xe4
     (XEN)    [<00000000002bf250>] acpi_tb_parse_root_table+0x2d4/0x358
     (XEN)    [<00000000002bf88c>] acpi_initialize_tables+0x80/0x98
     (XEN)    [<00000000002c06e8>] acpi_table_init+0x1c/0x94
     (XEN)    [<00000000002cf250>] acpi_boot_table_init+0x50/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) ACPI: iBFT 18510000, 0800 (r1 HISI   HIP08 0             0)
     (XEN) mm.c:1097: Changing MFN for a valid entry is not allowed 
(0x18510 -> 0x39920).
     (XEN) Xen WARN at mm.c:1097
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     0000000000262ad0 mm.c#xen_pt_update+0x3a8/0x59c
     (XEN) LR:     0000000000262ad0
     (XEN) SP:     00000000002ffc00
     (XEN) CPSR:   600003c9 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 00000000002af5a8  X1: 00000000000015a6  X2: 
0000000000000000
     (XEN)      X3: 0000000000000000  X4: 00000000002af460  X5: 
00000000002d8a70
     (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
7f7f7f7f7f7f7f7f
     (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
0101010101010101
     (XEN)     X12: 0000000000000008 X13: 00000000002861b8 X14: 
0000000000000030
     (XEN)     X15: 00000000004002f8 X16: 00000000002b3000 X17: 
00000000002cf2d8
     (XEN)     X18: 0000000000000001 X19: 0000000000000020 X20: 
00000000002a7010
     (XEN)     X21: 0000000000402000 X22: 0000000000339010 X23: 
0000000000000003
     (XEN)     X24: 0000000000039920 X25: 0000000000402000 X26: 
000000000000002f
     (XEN)     X27: 0000000000000020 X28: 0000000000403000  FP: 
00000000002ffc00
     (XEN)
     (XEN)   VTCR_EL2: 80000000
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 0000000018306000
     (XEN)
     (XEN)    ESR_EL2: f2000001
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000000
     (XEN)
     (XEN) Xen stack trace from sp=00000000002ffc00:
     (XEN)    00000000002ffcd0 0000000000262ce0 000080662fff9040 
0000000000001000
     (XEN)    0000000039920000 0000000000000114 00000000002e0078 
0000000000000000
     (XEN)    ffffffffffffffff 00000000002e1078 000020279c000000 
00000000002e0410
     (XEN)    0000000000000007 00000007ffffffd8 0000000000000001 
0000000000402000
     (XEN)    0000000000000000 0000000000000800 0000000000000001 
0000000000018306
     (XEN)    0000000000402010 0000000000000001 000000000040201c 
0000000000000000
     (XEN)    0000000000000000 0000000200000002 00000000002ffce0 
000000000027e72c
     (XEN)    00000000002ffd20 0000000000248f18 000080662fff9040 
00000000002ffdb8
     (XEN)    000020279c000000 0000000000000000 00000000002e0078 
00000000002b44b8
     (XEN)    00000000002ffd50 00000000002bf6b8 000080662fff9040 
0000000000000000
     (XEN)    00000000002e0078 00000000002b44b8 00000000002ffd70 
00000000002bf900
     (XEN)    0000000000000040 00000000002c06e8 00000000002ffd90 
00000000002c069c
     (XEN)    00000000002cee60 00000000002d35a8 00000000002ffdc0 
00000000002cf288
     (XEN)    0000000000000000 000020279c000000 0000000202630000 
0000000000000000
     (XEN)    00000000002ffde0 00000000002c9a94 000000020279c000 
00000000002b15c0
     (XEN)    000000003f141790 00000000002001b8 00000000181ce000 
0000000017fce000
     (XEN)    000000001a613000 0000000000000000 00000000004002f8 
000000001827fdb8
     (XEN)    0000000000001560 0000000000000001 0000000000000001 
000000001827fdb0
     (XEN)    0000000000000000 000000000000b000 000000001a613000 
0000003900000000
     (XEN)    0000000000000000 0000000f86ded000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000300000000 0000000000000000 
00000040ffffffff
     (XEN)    00000000ffffffff 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (PC)
     (XEN)    [<0000000000262ad0>] mm.c#xen_pt_update+0x3a8/0x59c (LR)
     (XEN)    [<0000000000262ce0>] set_fixmap+0x1c/0x2c
     (XEN)    [<000000000027e72c>] __acpi_map_table+0x38/0x98
     (XEN)    [<0000000000248f18>] acpi_os_map_memory+0x58/0x64
     (XEN)    [<00000000002bf6b8>] acpi_tb_verify_table+0x38/0x7c
     (XEN)    [<00000000002bf900>] acpi_get_table+0x5c/0xb8
     (XEN)    [<00000000002c069c>] acpi_table_parse+0x64/0x94
     (XEN)    [<00000000002cf288>] acpi_boot_table_init+0x88/0xd8
     (XEN)    [<00000000002c9a94>] start_xen+0x448/0xcac
     (XEN)    [<00000000002001b8>] arm64/head.o#primary_switched+0x10/0x30
     (XEN)
     (XEN) Domain heap initialised
     (XEN) Booting using ACPI
     (XEN) Platform: Generic System
     (XEN) Unable to initialize acpi uart: -9
     (XEN) Bad console= option 'dtuart'
      Xen 4.13.0-rc
     (XEN) Xen version 4.13.0-rc (joyx@) (aarch64-linux-gnu-gcc 
(crosstool-NG linaro-1.13.1-4.9-2014.05 - Linaro GCC 4.9-2014.05) 4.9.1 
20140505 (prerelease)) debug=y  Tue Jan  7 19:28:19 CST 2020
     (XEN) Latest ChangeSet: Tue Jan 7 19:28:13 2020 +0800 git:dbf557f
     (XEN) build-id: 7a09a72878a335512f97e10e34f791c6cc092b74
     (XEN) Processor: 481fd010: "Unknown", variant: 0x1, part 0xd01, rev 0x0
     (XEN) 64-bit Execution:
     (XEN)   Processor Features: 0000010011111111 0000000000000000
     (XEN)     Exception Levels: EL3:64 EL2:64 EL1:64 EL0:64
     (XEN)     Extensions: GICv3-SysReg
     (XEN)   Debug Features: 0000000110305408 0000000000000000
     (XEN)   Auxiliary Features: 0000000000000000 0000000000000000
     (XEN)   Memory Model Features: 0000000000101125 0000000010211122
     (XEN)   ISA Features:  0001100010211120 0000000000011001
     (XEN) 32-bit Execution: Unsupported
     (XEN) Using SMC Calling Convention v1.1
     (XEN) Using PSCI v1.1
     (XEN) ACPI: GICC (acpi_id[0x0000] address[0x9b000000] 
MPIDR[0x80000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0001] address[0x9b000000] 
MPIDR[0x80100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0002] address[0x9b000000] 
MPIDR[0x80200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0003] address[0x9b000000] 
MPIDR[0x80300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0004] address[0x9b000000] 
MPIDR[0x90000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0005] address[0x9b000000] 
MPIDR[0x90100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0006] address[0x9b000000] 
MPIDR[0x90200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0007] address[0x9b000000] 
MPIDR[0x90300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0008] address[0x9b000000] 
MPIDR[0xa0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0009] address[0x9b000000] 
MPIDR[0xa0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x000a] address[0x9b000000] 
MPIDR[0xa0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x000b] address[0x9b000000] 
MPIDR[0xa0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x000c] address[0x9b000000] 
MPIDR[0xb0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x000d] address[0x9b000000] 
MPIDR[0xb0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x000e] address[0x9b000000] 
MPIDR[0xb0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x000f] address[0x9b000000] 
MPIDR[0xb0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0010] address[0x9b000000] 
MPIDR[0xc0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0011] address[0x9b000000] 
MPIDR[0xc0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0012] address[0x9b000000] 
MPIDR[0xc0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0013] address[0x9b000000] 
MPIDR[0xc0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0014] address[0x9b000000] 
MPIDR[0xd0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0015] address[0x9b000000] 
MPIDR[0xd0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0016] address[0x9b000000] 
MPIDR[0xd0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0017] address[0x9b000000] 
MPIDR[0xd0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0018] address[0x9b000000] 
MPIDR[0xe0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0019] address[0x9b000000] 
MPIDR[0xe0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x001a] address[0x9b000000] 
MPIDR[0xe0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x001b] address[0x9b000000] 
MPIDR[0xe0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x001c] address[0x9b000000] 
MPIDR[0xf0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x001d] address[0x9b000000] 
MPIDR[0xf0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x001e] address[0x9b000000] 
MPIDR[0xf0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x001f] address[0x9b000000] 
MPIDR[0xf0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0020] address[0x9b000000] 
MPIDR[0x180000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0021] address[0x9b000000] 
MPIDR[0x180100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0022] address[0x9b000000] 
MPIDR[0x180200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0023] address[0x9b000000] 
MPIDR[0x180300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0024] address[0x9b000000] 
MPIDR[0x190000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0025] address[0x9b000000] 
MPIDR[0x190100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0026] address[0x9b000000] 
MPIDR[0x190200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0027] address[0x9b000000] 
MPIDR[0x190300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0028] address[0x9b000000] 
MPIDR[0x1a0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0029] address[0x9b000000] 
MPIDR[0x1a0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x002a] address[0x9b000000] 
MPIDR[0x1a0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x002b] address[0x9b000000] 
MPIDR[0x1a0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x002c] address[0x9b000000] 
MPIDR[0x1b0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x002d] address[0x9b000000] 
MPIDR[0x1b0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x002e] address[0x9b000000] 
MPIDR[0x1b0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x002f] address[0x9b000000] 
MPIDR[0x1b0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0030] address[0x9b000000] 
MPIDR[0x1c0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0031] address[0x9b000000] 
MPIDR[0x1c0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0032] address[0x9b000000] 
MPIDR[0x1c0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0033] address[0x9b000000] 
MPIDR[0x1c0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0034] address[0x9b000000] 
MPIDR[0x1d0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0035] address[0x9b000000] 
MPIDR[0x1d0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0036] address[0x9b000000] 
MPIDR[0x1d0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0037] address[0x9b000000] 
MPIDR[0x1d0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0038] address[0x9b000000] 
MPIDR[0x1e0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0039] address[0x9b000000] 
MPIDR[0x1e0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x003a] address[0x9b000000] 
MPIDR[0x1e0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x003b] address[0x9b000000] 
MPIDR[0x1e0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x003c] address[0x9b000000] 
MPIDR[0x1f0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x003d] address[0x9b000000] 
MPIDR[0x1f0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x003e] address[0x9b000000] 
MPIDR[0x1f0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x003f] address[0x9b000000] 
MPIDR[0x1f0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0040] address[0x9b000000] 
MPIDR[0x280000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0041] address[0x9b000000] 
MPIDR[0x280100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0042] address[0x9b000000] 
MPIDR[0x280200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0043] address[0x9b000000] 
MPIDR[0x280300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0044] address[0x9b000000] 
MPIDR[0x290000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0045] address[0x9b000000] 
MPIDR[0x290100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0046] address[0x9b000000] 
MPIDR[0x290200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0047] address[0x9b000000] 
MPIDR[0x290300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0048] address[0x9b000000] 
MPIDR[0x2a0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0049] address[0x9b000000] 
MPIDR[0x2a0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x004a] address[0x9b000000] 
MPIDR[0x2a0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x004b] address[0x9b000000] 
MPIDR[0x2a0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x004c] address[0x9b000000] 
MPIDR[0x2b0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x004d] address[0x9b000000] 
MPIDR[0x2b0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x004e] address[0x9b000000] 
MPIDR[0x2b0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x004f] address[0x9b000000] 
MPIDR[0x2b0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0050] address[0x9b000000] 
MPIDR[0x2c0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0051] address[0x9b000000] 
MPIDR[0x2c0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0052] address[0x9b000000] 
MPIDR[0x2c0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0053] address[0x9b000000] 
MPIDR[0x2c0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0054] address[0x9b000000] 
MPIDR[0x2d0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0055] address[0x9b000000] 
MPIDR[0x2d0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0056] address[0x9b000000] 
MPIDR[0x2d0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0057] address[0x9b000000] 
MPIDR[0x2d0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0058] address[0x9b000000] 
MPIDR[0x2e0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0059] address[0x9b000000] 
MPIDR[0x2e0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x005a] address[0x9b000000] 
MPIDR[0x2e0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x005b] address[0x9b000000] 
MPIDR[0x2e0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x005c] address[0x9b000000] 
MPIDR[0x2f0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x005d] address[0x9b000000] 
MPIDR[0x2f0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x005e] address[0x9b000000] 
MPIDR[0x2f0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x005f] address[0x9b000000] 
MPIDR[0x2f0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0060] address[0x9b000000] 
MPIDR[0x380000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0061] address[0x9b000000] 
MPIDR[0x380100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0062] address[0x9b000000] 
MPIDR[0x380200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0063] address[0x9b000000] 
MPIDR[0x380300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0064] address[0x9b000000] 
MPIDR[0x390000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0065] address[0x9b000000] 
MPIDR[0x390100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0066] address[0x9b000000] 
MPIDR[0x390200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0067] address[0x9b000000] 
MPIDR[0x390300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0068] address[0x9b000000] 
MPIDR[0x3a0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0069] address[0x9b000000] 
MPIDR[0x3a0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x006a] address[0x9b000000] 
MPIDR[0x3a0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x006b] address[0x9b000000] 
MPIDR[0x3a0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x006c] address[0x9b000000] 
MPIDR[0x3b0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x006d] address[0x9b000000] 
MPIDR[0x3b0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x006e] address[0x9b000000] 
MPIDR[0x3b0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x006f] address[0x9b000000] 
MPIDR[0x3b0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0070] address[0x9b000000] 
MPIDR[0x3c0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0071] address[0x9b000000] 
MPIDR[0x3c0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0072] address[0x9b000000] 
MPIDR[0x3c0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0073] address[0x9b000000] 
MPIDR[0x3c0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0074] address[0x9b000000] 
MPIDR[0x3d0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0075] address[0x9b000000] 
MPIDR[0x3d0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0076] address[0x9b000000] 
MPIDR[0x3d0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0077] address[0x9b000000] 
MPIDR[0x3d0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0078] address[0x9b000000] 
MPIDR[0x3e0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x0079] address[0x9b000000] 
MPIDR[0x3e0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x007a] address[0x9b000000] 
MPIDR[0x3e0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x007b] address[0x9b000000] 
MPIDR[0x3e0300] enabled)
     (XEN) ACPI: GICC (acpi_id[0x007c] address[0x9b000000] 
MPIDR[0x3f0000] enabled)
     (XEN) ACPI: GICC (acpi_id[0x007d] address[0x9b000000] 
MPIDR[0x3f0100] enabled)
     (XEN) ACPI: GICC (acpi_id[0x007e] address[0x9b000000] 
MPIDR[0x3f0200] enabled)
     (XEN) ACPI: GICC (acpi_id[0x007f] address[0x9b000000] 
MPIDR[0x3f0300] enabled)
     (XEN) 128 CPUs enabled, 128 CPUs total
     (XEN) SMP: Allowing 128 CPUs
     (XEN) Generic Timer IRQ: phys=30 hyp=26 virt=27 Freq: 100000 KHz
     (XEN) GICv3 initialization:
     (XEN)       gic_dist_addr=0x000000ae000000
     (XEN)       gic_maintenance_irq=25
     (XEN)       gic_rdist_stride=0
     (XEN)       gic_rdist_regions=128
     (XEN)       redistributor regions:
     (XEN)         - region 0: 0x000000ae100000 - 0x000000ae140000
     (XEN)         - region 1: 0x000000ae140000 - 0x000000ae180000
     (XEN)         - region 2: 0x000000ae180000 - 0x000000ae1c0000
     (XEN)         - region 3: 0x000000ae1c0000 - 0x000000ae200000
     (XEN)         - region 4: 0x000000ae200000 - 0x000000ae240000
     (XEN)         - region 5: 0x000000ae240000 - 0x000000ae280000
     (XEN)         - region 6: 0x000000ae280000 - 0x000000ae2c0000
     (XEN)         - region 7: 0x000000ae2c0000 - 0x000000ae300000
     (XEN)         - region 8: 0x000000ae300000 - 0x000000ae340000
     (XEN)         - region 9: 0x000000ae340000 - 0x000000ae380000
     (XEN)         - region 10: 0x000000ae380000 - 0x000000ae3c0000
     (XEN)         - region 11: 0x000000ae3c0000 - 0x000000ae400000
     (XEN)         - region 12: 0x000000ae400000 - 0x000000ae440000
     (XEN)         - region 13: 0x000000ae440000 - 0x000000ae480000
     (XEN)         - region 14: 0x000000ae480000 - 0x000000ae4c0000
     (XEN)         - region 15: 0x000000ae4c0000 - 0x000000ae500000
     (XEN)         - region 16: 0x000000ae500000 - 0x000000ae540000
     (XEN)         - region 17: 0x000000ae540000 - 0x000000ae580000
     (XEN)         - region 18: 0x000000ae580000 - 0x000000ae5c0000
     (XEN)         - region 19: 0x000000ae5c0000 - 0x000000ae600000
     (XEN)         - region 20: 0x000000ae600000 - 0x000000ae640000
     (XEN)         - region 21: 0x000000ae640000 - 0x000000ae680000
     (XEN)         - region 22: 0x000000ae680000 - 0x000000ae6c0000
     (XEN)         - region 23: 0x000000ae6c0000 - 0x000000ae700000
     (XEN)         - region 24: 0x000000ae700000 - 0x000000ae740000
     (XEN)         - region 25: 0x000000ae740000 - 0x000000ae780000
     (XEN)         - region 26: 0x000000ae780000 - 0x000000ae7c0000
     (XEN)         - region 27: 0x000000ae7c0000 - 0x000000ae800000
     (XEN)         - region 28: 0x000000ae800000 - 0x000000ae840000
     (XEN)         - region 29: 0x000000ae840000 - 0x000000ae880000
     (XEN)         - region 30: 0x000000ae880000 - 0x000000ae8c0000
     (XEN)         - region 31: 0x000000ae8c0000 - 0x000000ae900000
     (XEN)         - region 32: 0x000000aa100000 - 0x000000aa140000
     (XEN)         - region 33: 0x000000aa140000 - 0x000000aa180000
     (XEN)         - region 34: 0x000000aa180000 - 0x000000aa1c0000
     (XEN)         - region 35: 0x000000aa1c0000 - 0x000000aa200000
     (XEN)         - region 36: 0x000000aa200000 - 0x000000aa240000
     (XEN)         - region 37: 0x000000aa240000 - 0x000000aa280000
     (XEN)         - region 38: 0x000000aa280000 - 0x000000aa2c0000
     (XEN)         - region 39: 0x000000aa2c0000 - 0x000000aa300000
     (XEN)         - region 40: 0x000000aa300000 - 0x000000aa340000
     (XEN)         - region 41: 0x000000aa340000 - 0x000000aa380000
     (XEN)         - region 42: 0x000000aa380000 - 0x000000aa3c0000
     (XEN)         - region 43: 0x000000aa3c0000 - 0x000000aa400000
     (XEN)         - region 44: 0x000000aa400000 - 0x000000aa440000
     (XEN)         - region 45: 0x000000aa440000 - 0x000000aa480000
     (XEN)         - region 46: 0x000000aa480000 - 0x000000aa4c0000
     (XEN)         - region 47: 0x000000aa4c0000 - 0x000000aa500000
     (XEN)         - region 48: 0x000000aa500000 - 0x000000aa540000
     (XEN)         - region 49: 0x000000aa540000 - 0x000000aa580000
     (XEN)         - region 50: 0x000000aa580000 - 0x000000aa5c0000
     (XEN)         - region 51: 0x000000aa5c0000 - 0x000000aa600000
     (XEN)         - region 52: 0x000000aa600000 - 0x000000aa640000
     (XEN)         - region 53: 0x000000aa640000 - 0x000000aa680000
     (XEN)         - region 54: 0x000000aa680000 - 0x000000aa6c0000
     (XEN)         - region 55: 0x000000aa6c0000 - 0x000000aa700000
     (XEN)         - region 56: 0x000000aa700000 - 0x000000aa740000
     (XEN)         - region 57: 0x000000aa740000 - 0x000000aa780000
     (XEN)         - region 58: 0x000000aa780000 - 0x000000aa7c0000
     (XEN)         - region 59: 0x000000aa7c0000 - 0x000000aa800000
     (XEN)         - region 60: 0x000000aa800000 - 0x000000aa840000
     (XEN)         - region 61: 0x000000aa840000 - 0x000000aa880000
     (XEN)         - region 62: 0x000000aa880000 - 0x000000aa8c0000
     (XEN)         - region 63: 0x000000aa8c0000 - 0x000000aa900000
     (XEN)         - region 64: 0x002000ae100000 - 0x002000ae140000
     (XEN)         - region 65: 0x002000ae140000 - 0x002000ae180000
     (XEN)         - region 66: 0x002000ae180000 - 0x002000ae1c0000
     (XEN)         - region 67: 0x002000ae1c0000 - 0x002000ae200000
     (XEN)         - region 68: 0x002000ae200000 - 0x002000ae240000
     (XEN)         - region 69: 0x002000ae240000 - 0x002000ae280000
     (XEN)         - region 70: 0x002000ae280000 - 0x002000ae2c0000
     (XEN)         - region 71: 0x002000ae2c0000 - 0x002000ae300000
     (XEN)         - region 72: 0x002000ae300000 - 0x002000ae340000
     (XEN)         - region 73: 0x002000ae340000 - 0x002000ae380000
     (XEN)         - region 74: 0x002000ae380000 - 0x002000ae3c0000
     (XEN)         - region 75: 0x002000ae3c0000 - 0x002000ae400000
     (XEN)         - region 76: 0x002000ae400000 - 0x002000ae440000
     (XEN)         - region 77: 0x002000ae440000 - 0x002000ae480000
     (XEN)         - region 78: 0x002000ae480000 - 0x002000ae4c0000
     (XEN)         - region 79: 0x002000ae4c0000 - 0x002000ae500000
     (XEN)         - region 80: 0x002000ae500000 - 0x002000ae540000
     (XEN)         - region 81: 0x002000ae540000 - 0x002000ae580000
     (XEN)         - region 82: 0x002000ae580000 - 0x002000ae5c0000
     (XEN)         - region 83: 0x002000ae5c0000 - 0x002000ae600000
     (XEN)         - region 84: 0x002000ae600000 - 0x002000ae640000
     (XEN)         - region 85: 0x002000ae640000 - 0x002000ae680000
     (XEN)         - region 86: 0x002000ae680000 - 0x002000ae6c0000
     (XEN)         - region 87: 0x002000ae6c0000 - 0x002000ae700000
     (XEN)         - region 88: 0x002000ae700000 - 0x002000ae740000
     (XEN)         - region 89: 0x002000ae740000 - 0x002000ae780000
     (XEN)         - region 90: 0x002000ae780000 - 0x002000ae7c0000
     (XEN)         - region 91: 0x002000ae7c0000 - 0x002000ae800000
     (XEN)         - region 92: 0x002000ae800000 - 0x002000ae840000
     (XEN)         - region 93: 0x002000ae840000 - 0x002000ae880000
     (XEN)         - region 94: 0x002000ae880000 - 0x002000ae8c0000
     (XEN)         - region 95: 0x002000ae8c0000 - 0x002000ae900000
     (XEN)         - region 96: 0x002000aa100000 - 0x002000aa140000
     (XEN)         - region 97: 0x002000aa140000 - 0x002000aa180000
     (XEN)         - region 98: 0x002000aa180000 - 0x002000aa1c0000
     (XEN)         - region 99: 0x002000aa1c0000 - 0x002000aa200000
     (XEN)         - region 100: 0x002000aa200000 - 0x002000aa240000
     (XEN)         - region 101: 0x002000aa240000 - 0x002000aa280000
     (XEN)         - region 102: 0x002000aa280000 - 0x002000aa2c0000
     (XEN)         - region 103: 0x002000aa2c0000 - 0x002000aa300000
     (XEN)         - region 104: 0x002000aa300000 - 0x002000aa340000
     (XEN)         - region 105: 0x002000aa340000 - 0x002000aa380000
     (XEN)         - region 106: 0x002000aa380000 - 0x002000aa3c0000
     (XEN)         - region 107: 0x002000aa3c0000 - 0x002000aa400000
     (XEN)         - region 108: 0x002000aa400000 - 0x002000aa440000
     (XEN)         - region 109: 0x002000aa440000 - 0x002000aa480000
     (XEN)         - region 110: 0x002000aa480000 - 0x002000aa4c0000
     (XEN)         - region 111: 0x002000aa4c0000 - 0x002000aa500000
     (XEN)         - region 112: 0x002000aa500000 - 0x002000aa540000
     (XEN)         - region 113: 0x002000aa540000 - 0x002000aa580000
     (XEN)         - region 114: 0x002000aa580000 - 0x002000aa5c0000
     (XEN)         - region 115: 0x002000aa5c0000 - 0x002000aa600000
     (XEN)         - region 116: 0x002000aa600000 - 0x002000aa640000
     (XEN)         - region 117: 0x002000aa640000 - 0x002000aa680000
     (XEN)         - region 118: 0x002000aa680000 - 0x002000aa6c0000
     (XEN)         - region 119: 0x002000aa6c0000 - 0x002000aa700000
     (XEN)         - region 120: 0x002000aa700000 - 0x002000aa740000
     (XEN)         - region 121: 0x002000aa740000 - 0x002000aa780000
     (XEN)         - region 122: 0x002000aa780000 - 0x002000aa7c0000
     (XEN)         - region 123: 0x002000aa7c0000 - 0x002000aa800000
     (XEN)         - region 124: 0x002000aa800000 - 0x002000aa840000
     (XEN)         - region 125: 0x002000aa840000 - 0x002000aa880000
     (XEN)         - region 126: 0x002000aa880000 - 0x002000aa8c0000
     (XEN)         - region 127: 0x002000aa8c0000 - 0x002000aa900000
     (XEN) GICv3 compatible with GICv2 cbase 0x0000009b000000 vbase 
0x0000009b020000
     (XEN) GICv3: using at most 57344 LPIs on the host.
     (XEN) GICv3: 672 lines, (IID 00031736).
     (XEN) GICv3: Found ITS @0x202100000
     (XEN) GICv3: Found ITS @0x200202100000
     (XEN) GICv3: CPU0: Found redistributor in region 0 @000000004003a000
     (XEN) XSM Framework v1.0.0 initialized
     (XEN) Initialising XSM SILO mode
     (XEN) Using scheduler: SMP Credit Scheduler rev2 (credit2)
     (XEN) Initializing Credit2 scheduler
     (XEN)  load_precision_shift: 18
     (XEN)  load_window_shift: 30
     (XEN)  underload_balance_tolerance: 0
     (XEN)  overload_balance_tolerance: -3
     (XEN)  runqueues arrangement: socket
     (XEN)  cap enforcement granularity: 10ms
     (XEN) load tracking window length 1073741824 ns
     (XEN) Defaulting to alternative key handling; send 'A' to switch to 
normal mode.
     (XEN) Allocated console ring of 1024 KiB.
     (XEN) CPU0: Guest atomics will try 29 times before pausing the domain
     (XEN) Bringing up CPU1
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x0 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x1 Value to [3L]..
     - CPU 00080100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU1: Found redistributor in region 1 @000000004007b000
     (XEN) CPU1: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 1 booted.
     (XEN) Bringing up CPU2
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x0 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x2 Value to [7L]..
     - CPU 00080200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU2: Found redistributor in region 2 @00000000400bc000
     (XEN) CPU2: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 2 booted.
     (XEN) Bringing up CPU3
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x0 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x3 Value to [fL]..
     - CPU 00080300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU3: Found redistributor in region 3 @00000000400fd000
     (XEN) CPU3: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 3 booted.
     (XEN) Bringing up CPU4
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x1 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x0 Value to [10fL]..
     - CPU 00090000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU4: Found redistributor in region 4 @000000004013e000
     (XEN) CPU4: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 4 booted.
     (XEN) Bringing up CPU5
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x1 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x1 Value to [30fL]..
     - CPU 00090100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU5: Found redistributor in region 5 @000000004017f000
     (XEN) CPU5: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 5 booted.
     (XEN) Bringing up CPU6
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x1 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x2 Value to [70fL]..
     - CPU 00090200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU6: Found redistributor in region 6 @00000000401c0000
     (XEN) CPU6: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 6 booted.
     (XEN) Bringing up CPU7
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x1 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x3 Value to [f0fL]..
     - CPU 00090300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU7: Found redistributor in region 7 @0000000040201000
     (XEN) CPU7: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 7 booted.
     (XEN) Bringing up CPU8
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x2 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x0 Value to [10f0fL]..
     - CPU 000a0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU8: Found redistributor in region 8 @0000000040242000
     (XEN) CPU8: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 8 booted.
     (XEN) Bringing up CPU9
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x2 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x1 Value to [30f0fL]..
     - CPU 000a0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU9: Found redistributor in region 9 @0000000040283000
     (XEN) CPU9: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 9 booted.
     (XEN) Bringing up CPU10
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x2 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x2 Value to [70f0fL]..
     - CPU 000a0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU10: Found redistributor in region 10 @00000000402c4000
     (XEN) CPU10: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 10 booted.
     (XEN) Bringing up CPU11
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x2 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x3 Value to [f0f0fL]..
     - CPU 000a0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU11: Found redistributor in region 11 @0000000040305000
     (XEN) CPU11: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 11 booted.
     (XEN) Bringing up CPU12
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x3 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x0 Value to [10f0f0fL]..
     - CPU 000b0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU12: Found redistributor in region 12 @0000000040346000
     (XEN) CPU12: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 12 booted.
     (XEN) Bringing up CPU13
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x3 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x1 Value to [30f0f0fL]..
     - CPU 000b0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU13: Found redistributor in region 13 @0000000040387000
     (XEN) CPU13: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 13 booted.
     (XEN) Bringing up CPU14
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x3 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x2 Value to [70f0f0fL]..
     - CPU 000b0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU14: Found redistributor in region 14 @00000000403c8000
     (XEN) CPU14: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 14 booted.
     (XEN) Bringing up CPU15
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x3 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x3 Value to [f0f0f0fL]..
     - CPU 000b0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU15: Found redistributor in region 15 @0000000040409000
     (XEN) CPU15: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 15 booted.
     (XEN) Bringing up CPU16
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x4 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x0 Value to [1L]..
     - CPU 000c0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU16: Found redistributor in region 16 @000000004044a000
     (XEN) CPU16: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 16 booted.
     (XEN) Bringing up CPU17
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x4 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x1 Value to [3L]..
     - CPU 000c0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU17: Found redistributor in region 17 @000000004048b000
     (XEN) CPU17: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 17 booted.
     (XEN) Bringing up CPU18
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x4 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x2 Value to [7L]..
     - CPU 000c0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU18: Found redistributor in region 18 @00000000404cc000
     (XEN) CPU18: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 18 booted.
     (XEN) Bringing up CPU19
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x4 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x3 Value to [fL]..
     - CPU 000c0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU19: Found redistributor in region 19 @000000004050d000
     (XEN) CPU19: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 19 booted.
     (XEN) Bringing up CPU20
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x5 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x0 Value to [10fL]..
     - CPU 000d0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU20: Found redistributor in region 20 @000000004054e000
     (XEN) CPU20: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 20 booted.
     (XEN) Bringing up CPU21
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x5 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x1 Value to [30fL]..
     - CPU 000d0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU21: Found redistributor in region 21 @000000004058f000
     (XEN) CPU21: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 21 booted.
     (XEN) Bringing up CPU22
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x5 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x2 Value to [70fL]..
     - CPU 000d0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU22: Found redistributor in region 22 @00000000405d0000
     (XEN) CPU22: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 22 booted.
     (XEN) Bringing up CPU23
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x5 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x3 Value to [f0fL]..
     - CPU 000d0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU23: Found redistributor in region 23 @0000000040611000
     (XEN) CPU23: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 23 booted.
     (XEN) Bringing up CPU24
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x6 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x0 Value to [10f0fL]..
     - CPU 000e0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU24: Found redistributor in region 24 @0000000040652000
     (XEN) CPU24: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 24 booted.
     (XEN) Bringing up CPU25
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x6 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x1 Value to [30f0fL]..
     - CPU 000e0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU25: Found redistributor in region 25 @0000000040693000
     (XEN) CPU25: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 25 booted.
     (XEN) Bringing up CPU26
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x6 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x2 Value to [70f0fL]..
     - CPU 000e0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU26: Found redistributor in region 26 @00000000406d4000
     (XEN) CPU26: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 26 booted.
     (XEN) Bringing up CPU27
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x6 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x3 Value to [f0f0fL]..
     - CPU 000e0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU27: Found redistributor in region 27 @0000000040715000
     (XEN) CPU27: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 27 booted.
     (XEN) Bringing up CPU28
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x7 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x0 Value to [10f0f0fL]..
     - CPU 000f0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU28: Found redistributor in region 28 @0000000040756000
     (XEN) CPU28: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 28 booted.
     (XEN) Bringing up CPU29
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x7 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x1 Value to [30f0f0fL]..
     - CPU 000f0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU29: Found redistributor in region 29 @0000000040797000
     (XEN) CPU29: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 29 booted.
     (XEN) Bringing up CPU30
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x7 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x2 Value to [70f0f0fL]..
     - CPU 000f0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU30: Found redistributor in region 30 @00000000407d8000
     (XEN) CPU30: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 30 booted.
     (XEN) Bringing up CPU31
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[219L] Modify TA Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x1 ClusterID = 0x7 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x1 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x3 Value to [f0f0f0fL]..
     - CPU 000f0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU31: Found redistributor in region 31 @0000000040819000
     (XEN) CPU31: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 31 booted.
     (XEN) Bringing up CPU32
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x0 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x0 Value to [1L]..
     - CPU 00180000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU32: Found redistributor in region 32 @000000004085a000
     (XEN) CPU32: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 32 booted.
     (XEN) Bringing up CPU33
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x0 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x1 Value to [3L]..
     - CPU 00180100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU33: Found redistributor in region 33 @000000004089b000
     (XEN) CPU33: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 33 booted.
     (XEN) Bringing up CPU34
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x0 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x2 Value to [7L]..
     - CPU 00180200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU34: Found redistributor in region 34 @00000000408dc000
     (XEN) CPU34: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 34 booted.
     (XEN) Bringing up CPU35
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x0 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x3 Value to [fL]..
     - CPU 00180300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU35: Found redistributor in region 35 @000000004091d000
     (XEN) CPU35: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 35 booted.
     (XEN) Bringing up CPU36
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x1 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x0 Value to [10fL]..
     - CPU 00190000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU36: Found redistributor in region 36 @000000004095e000
     (XEN) CPU36: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 36 booted.
     (XEN) Bringing up CPU37
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x1 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x1 Value to [30fL]..
     - CPU 00190100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU37: Found redistributor in region 37 @000000004099f000
     (XEN) CPU37: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 37 booted.
     (XEN) Bringing up CPU38
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x1 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x2 Value to [70fL]..
     - CPU 00190200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU38: Found redistributor in region 38 @00000000409e0000
     (XEN) CPU38: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 38 booted.
     (XEN) Bringing up CPU39
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x1 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x3 Value to [f0fL]..
     - CPU 00190300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU39: Found redistributor in region 39 @0000000040a21000
     (XEN) CPU39: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 39 booted.
     (XEN) Bringing up CPU40
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x2 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x0 Value to [10f0fL]..
     - CPU 001a0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU40: Found redistributor in region 40 @0000000040a62000
     (XEN) CPU40: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 40 booted.
     (XEN) Bringing up CPU41
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x2 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x1 Value to [30f0fL]..
     - CPU 001a0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU41: Found redistributor in region 41 @0000000040aa3000
     (XEN) CPU41: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 41 booted.
     (XEN) Bringing up CPU42
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x2 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x2 Value to [70f0fL]..
     - CPU 001a0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU42: Found redistributor in region 42 @0000000040ae4000
     (XEN) CPU42: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 42 booted.
     (XEN) Bringing up CPU43
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x2 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x3 Value to [f0f0fL]..
     - CPU 001a0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU43: Found redistributor in region 43 @0000000040b25000
     (XEN) CPU43: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 43 booted.
     (XEN) Bringing up CPU44
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x3 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x0 Value to [10f0f0fL]..
     - CPU 001b0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU44: Found redistributor in region 44 @0000000040b66000
     (XEN) CPU44: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 44 booted.
     (XEN) Bringing up CPU45
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x3 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x1 Value to [30f0f0fL]..
     - CPU 001b0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU45: Found redistributor in region 45 @0000000040ba7000
     (XEN) CPU45: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 45 booted.
     (XEN) Bringing up CPU46
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x3 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x2 Value to [70f0f0fL]..
     - CPU 001b0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU46: Found redistributor in region 46 @0000000040be8000
     (XEN) CPU46: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 46 booted.
     (XEN) Bringing up CPU47
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x3 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x3 Value to [f0f0f0fL]..
     - CPU 001b0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU47: Found redistributor in region 47 @0000000040c29000
     (XEN) CPU47: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 47 booted.
     (XEN) Bringing up CPU48
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x4 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x0 Value to [1L]..
     - CPU 001c0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU48: Found redistributor in region 48 @0000000040c6a000
     (XEN) CPU48: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 48 booted.
     (XEN) Bringing up CPU49
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x4 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x1 Value to [3L]..
     - CPU 001c0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU49: Found redistributor in region 49 @0000000040cab000
     (XEN) CPU49: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 49 booted.
     (XEN) Bringing up CPU50
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x4 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x2 Value to [7L]..
     - CPU 001c0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU50: Found redistributor in region 50 @0000000040cec000
     (XEN) CPU50: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 50 booted.
     (XEN) Bringing up CPU51
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x4 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x3 Value to [fL]..
     - CPU 001c0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU51: Found redistributor in region 51 @0000000040d2d000
     (XEN) CPU51: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 51 booted.
     (XEN) Bringing up CPU52
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x5 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x0 Value to [10fL]..
     - CPU 001d0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU52: Found redistributor in region 52 @0000000040d6e000
     (XEN) CPU52: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 52 booted.
     (XEN) Bringing up CPU53
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x5 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x1 Value to [30fL]..
     - CPU 001d0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU53: Found redistributor in region 53 @0000000040daf000
     (XEN) CPU53: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 53 booted.
     (XEN) Bringing up CPU54
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x5 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x2 Value to [70fL]..
     - CPU 001d0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU54: Found redistributor in region 54 @0000000040df0000
     (XEN) CPU54: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 54 booted.
     (XEN) Bringing up CPU55
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x5 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x3 Value to [f0fL]..
     - CPU 001d0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU55: Found redistributor in region 55 @0000000040e31000
     (XEN) CPU55: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 55 booted.
     (XEN) Bringing up CPU56
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x6 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x0 Value to [10f0fL]..
     - CPU 001e0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU56: Found redistributor in region 56 @0000000040e72000
     (XEN) CPU56: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 56 booted.
     (XEN) Bringing up CPU57
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x6 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x1 Value to [30f0fL]..
     - CPU 001e0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU57: Found redistributor in region 57 @0000000040eb3000
     (XEN) CPU57: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 57 booted.
     (XEN) Bringing up CPU58
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x6 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x2 Value to [70f0fL]..
     - CPU 001e0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU58: Found redistributor in region 58 @0000000040ef4000
     (XEN) CPU58: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 58 booted.
     (XEN) Bringing up CPU59
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x6 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x3 Value to [f0f0fL]..
     - CPU 001e0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU59: Found redistributor in region 59 @0000000040f35000
     (XEN) CPU59: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 59 booted.
     (XEN) Bringing up CPU60
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x7 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x0 Value to [10f0f0fL]..
     - CPU 001f0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU60: Found redistributor in region 60 @0000000040f76000
     (XEN) CPU60: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 60 booted.
     (XEN) Bringing up CPU61
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x7 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x1 Value to [30f0f0fL]..
     - CPU 001f0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU61: Found redistributor in region 61 @0000000040fb7000
     (XEN) CPU61: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 61 booted.
     (XEN) Bringing up CPU62
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x7 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x2 Value to [70f0f0fL]..
     - CPU 001f0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU62: Found redistributor in region 62 @0000000040ff8000
     (XEN) CPU62: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 62 booted.
     (XEN) Bringing up CPU63
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[229L] Modify TB Boot Address 
to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x3 ClusterID = 0x7 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x3 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x3 Value to [f0f0f0fL]..
     - CPU 001f0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU63: Found redistributor in region 63 @0000000041039000
     (XEN) CPU63: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 63 booted.
     (XEN) Bringing up CPU64
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x0 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x0 Value to [1L]..
     - CPU 00280000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU64: Found redistributor in region 64 @000000004107a000
     (XEN) CPU64: Guest atomics will try 26 times before pausing the domain
     (XEN) CPU 64 booted.
     (XEN) Bringing up CPU65
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x0 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x1 Value to [3L]..
     - CPU 00280100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU65: Found redistributor in region 65 @00000000410bb000
     (XEN) CPU65: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 65 booted.
     (XEN) Bringing up CPU66
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x0 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x2 Value to [7L]..
     - CPU 00280200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU66: Found redistributor in region 66 @00000000410fc000
     (XEN) CPU66: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 66 booted.
     (XEN) Bringing up CPU67
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x0 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x3 Value to [fL]..
     - CPU 00280300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU67: Found redistributor in region 67 @000000004113d000
     (XEN) CPU67: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 67 booted.
     (XEN) Bringing up CPU68
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x1 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x0 Value to [10fL]..
     - CPU 00290000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU68: Found redistributor in region 68 @000000004117e000
     (XEN) CPU68: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 68 booted.
     (XEN) Bringing up CPU69
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x1 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x1 Value to [30fL]..
     - CPU 00290100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU69: Found redistributor in region 69 @00000000411bf000
     (XEN) CPU69: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 69 booted.
     (XEN) Bringing up CPU70
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x1 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x2 Value to [70fL]..
     - CPU 00290200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU70: Found redistributor in region 70 @0000000041200000
     (XEN) CPU70: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 70 booted.
     (XEN) Bringing up CPU71
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x1 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x3 Value to [f0fL]..
     - CPU 00290300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU71: Found redistributor in region 71 @0000000041241000
     (XEN) CPU71: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 71 booted.
     (XEN) Bringing up CPU72
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x2 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x0 Value to [10f0fL]..
     - CPU 002a0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU72: Found redistributor in region 72 @0000000041282000
     (XEN) CPU72: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 72 booted.
     (XEN) Bringing up CPU73
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x2 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x1 Value to [30f0fL]..
     - CPU 002a0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU73: Found redistributor in region 73 @00000000412c3000
     (XEN) CPU73: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 73 booted.
     (XEN) Bringing up CPU74
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x2 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x2 Value to [70f0fL]..
     - CPU 002a0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU74: Found redistributor in region 74 @0000000041304000
     (XEN) CPU74: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 74 booted.
     (XEN) Bringing up CPU75
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x2 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x3 Value to [f0f0fL]..
     - CPU 002a0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU75: Found redistributor in region 75 @0000000041345000
     (XEN) CPU75: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 75 booted.
     (XEN) Bringing up CPU76
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x3 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x0 Value to [10f0f0fL]..
     - CPU 002b0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU76: Found redistributor in region 76 @0000000041386000
     (XEN) CPU76: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 76 booted.
     (XEN) Bringing up CPU77
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x3 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x1 Value to [30f0f0fL]..
     - CPU 002b0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU77: Found redistributor in region 77 @00000000413c7000
     (XEN) CPU77: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 77 booted.
     (XEN) Bringing up CPU78
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x3 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x2 Value to [70f0f0fL]..
     - CPU 002b0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU78: Found redistributor in region 78 @0000000041408000
     (XEN) CPU78: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 78 booted.
     (XEN) Bringing up CPU79
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x3 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x3 Value to [f0f0f0fL]..
     - CPU 002b0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU79: Found redistributor in region 79 @0000000041449000
     (XEN) CPU79: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 79 booted.
     (XEN) Bringing up CPU80
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x4 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x0 Value to [1L]..
     - CPU 002c0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU80: Found redistributor in region 80 @000000004148a000
     (XEN) CPU80: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 80 booted.
     (XEN) Bringing up CPU81
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x4 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x1 Value to [3L]..
     - CPU 002c0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU81: Found redistributor in region 81 @00000000414cb000
     (XEN) CPU81: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 81 booted.
     (XEN) Bringing up CPU82
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x4 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x2 Value to [7L]..
     - CPU 002c0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU82: Found redistributor in region 82 @000000004150c000
     (XEN) CPU82: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 82 booted.
     (XEN) Bringing up CPU83
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x4 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x3 Value to [fL]..
     - CPU 002c0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU83: Found redistributor in region 83 @000000004154d000
     (XEN) CPU83: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 83 booted.
     (XEN) Bringing up CPU84
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x5 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x0 Value to [10fL]..
     - CPU 002d0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU84: Found redistributor in region 84 @000000004158e000
     (XEN) CPU84: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 84 booted.
     (XEN) Bringing up CPU85
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x5 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x1 Value to [30fL]..
     - CPU 002d0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU85: Found redistributor in region 85 @00000000415cf000
     (XEN) CPU85: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 85 booted.
     (XEN) Bringing up CPU86
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x5 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x2 Value to [70fL]..
     - CPU 002d0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU86: Found redistributor in region 86 @0000000041610000
     (XEN) CPU86: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 86 booted.
     (XEN) Bringing up CPU87
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x5 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x3 Value to [f0fL]..
     - CPU 002d0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU87: Found redistributor in region 87 @0000000041651000
     (XEN) CPU87: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 87 booted.
     (XEN) Bringing up CPU88
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x6 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x0 Value to [10f0fL]..
     - CPU 002e0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU88: Found redistributor in region 88 @0000000041692000
     (XEN) CPU88: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 88 booted.
     (XEN) Bringing up CPU89
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x6 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x1 Value to [30f0fL]..
     - CPU 002e0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU89: Found redistributor in region 89 @00000000416d3000
     (XEN) CPU89: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 89 booted.
     (XEN) Bringing up CPU90
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x6 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x2 Value to [70f0fL]..
     - CPU 002e0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU90: Found redistributor in region 90 @0000000041714000
     (XEN) CPU90: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 90 booted.
     (XEN) Bringing up CPU91
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x6 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x3 Value to [f0f0fL]..
     - CPU 002e0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU91: Found redistributor in region 91 @0000000041755000
     (XEN) CPU91: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 91 booted.
     (XEN) Bringing up CPU92
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x7 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x0 Value to [10f0f0fL]..
     - CPU 002f0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU92: Found redistributor in region 92 @0000000041796000
     (XEN) CPU92: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 92 booted.
     (XEN) Bringing up CPU93
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x7 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x1 Value to [30f0f0fL]..
     - CPU 002f0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU93: Found redistributor in region 93 @00000000417d7000
     (XEN) CPU93: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 93 booted.
     (XEN) Bringing up CPU94
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x7 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x2 Value to [70f0f0fL]..
     - CPU 002f0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU94: Found redistributor in region 94 @0000000041818000
     (XEN) CPU94: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 94 booted.
     (XEN) Bringing up CPU95
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[239L] Modify S1 TA Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x5 ClusterID = 0x7 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x5 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x3 Value to [f0f0f0fL]..
     - CPU 002f0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU95: Found redistributor in region 95 @0000000041859000
     (XEN) CPU95: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 95 booted.
     (XEN) Bringing up CPU96
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x0 
domain_bit = 0x0
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x0 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x0 Value to [1L]..
     - CPU 00380000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU96: Found redistributor in region 96 @000000004189a000
     (XEN) CPU96: Guest atomics will try 27 times before pausing the domain
     (XEN) CPU 96 booted.
     (XEN) Bringing up CPU97
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x0 
domain_bit = 0x1
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x0 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x1 Value to [3L]..
     - CPU 00380100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU97: Found redistributor in region 97 @00000000418db000
     (XEN) CPU97: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 97 booted.
     (XEN) Bringing up CPU98
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x0 
domain_bit = 0x2
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x0 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x2 Value to [7L]..
     - CPU 00380200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU98: Found redistributor in region 98 @000000004191c000
     (XEN) CPU98: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 98 booted.
     (XEN) Bringing up CPU99
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x0 
domain_bit = 0x3
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x0 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x0 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x0 ClustIdx = 0x0 
domain_bit = 0x3 Value to [fL]..
     - CPU 00380300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU99: Found redistributor in region 99 @000000004195d000
     (XEN) CPU99: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 99 booted.
     (XEN) Bringing up CPU100
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x1 
domain_bit = 0x0
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x1 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x0 Value to [10fL]..
     - CPU 00390000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU100: Found redistributor in region 100 
@000000004199e000
     (XEN) CPU100: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 100 booted.
     (XEN) Bringing up CPU101
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x1 
domain_bit = 0x1
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x1 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x1 Value to [30fL]..
     - CPU 00390100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU101: Found redistributor in region 101 
@00000000419df000
     (XEN) CPU101: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 101 booted.
     (XEN) Bringing up CPU102
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x1 
domain_bit = 0x2
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x1 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x2 Value to [70fL]..
     - CPU 00390200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU102: Found redistributor in region 102 
@0000000041a20000
     (XEN) CPU102: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 102 booted.
     (XEN) Bringing up CPU103
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x1 
domain_bit = 0x3
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x1 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x1 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x1 ClustIdx = 0x0 
domain_bit = 0x3 Value to [f0fL]..
     - CPU 00390300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU103: Found redistributor in region 103 
@0000000041a61000
     (XEN) CPU103: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 103 booted.
     (XEN) Bringing up CPU104
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x2 
domain_bit = 0x0
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x2 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x0 Value to [10f0fL]..
     - CPU 003a0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU104: Found redistributor in region 104 
@0000000041aa2000
     (XEN) CPU104: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 104 booted.
     (XEN) Bringing up CPU105
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x2 
domain_bit = 0x1
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x2 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x1 Value to [30f0fL]..
     - CPU 003a0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU105: Found redistributor in region 105 
@0000000041ae3000
     (XEN) CPU105: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 105 booted.
     (XEN) Bringing up CPU106
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x2 
domain_bit = 0x2
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x2 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x2 Value to [70f0fL]..
     - CPU 003a0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU106: Found redistributor in region 106 
@0000000041b24000
     (XEN) CPU106: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 106 booted.
     (XEN) Bringing up CPU107
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x2 
domain_bit = 0x3
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x2 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x2 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x2 ClustIdx = 0x0 
domain_bit = 0x3 Value to [f0f0fL]..
     - CPU 003a0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU107: Found redistributor in region 107 
@0000000041b65000
     (XEN) CPU107: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 107 booted.
     (XEN) Bringing up CPU108
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x3 
domain_bit = 0x0
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x3 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x0 Value to [10f0f0fL]..
     - CPU 003b0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU108: Found redistributor in region 108 
@0000000041ba6000
     (XEN) CPU108: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 108 booted.
     (XEN) Bringing up CPU109
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x3 
domain_bit = 0x1
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x3 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x1 Value to [30f0f0fL]..
     - CPU 003b0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU109: Found redistributor in region 109 
@0000000041be7000
     (XEN) CPU109: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 109 booted.
     (XEN) Bringing up CPU110
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x3 
domain_bit = 0x2
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x3 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x2 Value to [70f0f0fL]..
     - CPU 003b0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU110: Found redistributor in region 110 
@0000000041c28000
     (XEN) CPU110: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 110 booted.
     (XEN) Bringing up CPU111
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x3 
domain_bit = 0x3
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x3 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x3 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x3 ClustIdx = 0x0 
domain_bit = 0x3 Value to [f0f0f0fL]..
     - CPU 003b0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU111: Found redistributor in region 111 
@0000000041c69000
     (XEN) CPU111: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 111 booted.
     (XEN) Bringing up CPU112
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x4 
domain_bit = 0x0
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x4 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x0 Value to [1L]..
     - CPU 003c0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU112: Found redistributor in region 112 
@0000000041caa000
     (XEN) CPU112: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 112 booted.
     (XEN) Bringing up CPU113
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x4 
domain_bit = 0x1
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x4 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x1 Value to [3L]..
     - CPU 003c0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU113: Found redistributor in region 113 
@0000000041ceb000
     (XEN) CPU113: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 113 booted.
     (XEN) Bringing up CPU114
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x4 
domain_bit = 0x2
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x4 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x2 Value to [7L]..
     - CPU 003c0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU114: Found redistributor in region 114 
@0000000041d2c000
     (XEN) CPU114: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 114 booted.
     (XEN) Bringing up CPU115
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x4 
domain_bit = 0x3
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x4 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x4 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x4 ClustIdx = 0x1 
domain_bit = 0x3 Value to [fL]..
     - CPU 003c0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU115: Found redistributor in region 115 
@0000000041d6d000
     (XEN) CPU115: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 115 booted.
     (XEN) Bringing up CPU116
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x5 
domain_bit = 0x0
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x5 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x0 Value to [10fL]..
     - CPU 003d0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU116: Found redistributor in region 116 
@0000000041dae000
     (XEN) CPU116: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 116 booted.
     (XEN) Bringing up CPU117
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x5 
domain_bit = 0x1
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x5 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x1 Value to [30fL]..
     - CPU 003d0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU117: Found redistributor in region 117 
@0000000041def000
     (XEN) CPU117: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 117 booted.
     (XEN) Bringing up CPU118
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x5 
domain_bit = 0x2
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x5 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x2 Value to [70fL]..
     - CPU 003d0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU118: Found redistributor in region 118 
@0000000041e30000
     (XEN) CPU118: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 118 booted.
     (XEN) Bringing up CPU119
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x5 
domain_bit = 0x3
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x5 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x5 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x5 ClustIdx = 0x1 
domain_bit = 0x3 Value to [f0fL]..
     - CPU 003d0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU119: Found redistributor in region 119 
@0000000041e71000
     (XEN) CPU119: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 119 booted.
     (XEN) Bringing up CPU120
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x6 
domain_bit = 0x0
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x6 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x0 Value to [10f0fL]..
     - CPU 003e0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU120: Found redistributor in region 120 
@0000000041eb2000
     (XEN) CPU120: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 120 booted.
     (XEN) Bringing up CPU121
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x6 
domain_bit = 0x1
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x6 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x1 Value to [30f0fL]..
     - CPU 003e0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU121: Found redistributor in region 121 
@0000000041ef3000
     (XEN) CPU121: Guest atomics will try 28 times before pausing the domain
     (XEN) CPU 121 booted.
     (XEN) Bringing up CPU122
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x6 
domain_bit = 0x2
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x6 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x2 Value to [70f0fL]..
     - CPU 003e0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU122: Found redistributor in region 122 
@0000000041f34000
     (XEN) CPU122: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 122 booted.
     (XEN) Bringing up CPU123
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x6 
domain_bit = 0x3
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x6 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x6 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x6 ClustIdx = 0x1 
domain_bit = 0x3 Value to [f0f0fL]..
     - CPU 003e0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU123: Found redistributor in region 123 
@0000000041f75000
     (XEN) CPU123: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 123 booted.
     (XEN) Bringing up CPU124
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x7 
domain_bit = 0x0
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x0
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x7 domain_bit = 0x0 Value 
to [dd1f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x0 Value to [10f0f0fL]..
     - CPU 003f0000 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU124: Found redistributor in region 124 
@0000000041fb6000
     (XEN) CPU124: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 124 booted.
     (XEN) Bringing up CPU125
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x7 
domain_bit = 0x1
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x1
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x7 domain_bit = 0x1 Value 
to [dd3f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x1 Value to [30f0f0fL]..
     - CPU 003f0100 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU125: Found redistributor in region 125 
@0000000041ff7000
     (XEN) CPU125: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 125 booted.
     (XEN) Bringing up CPU126
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x7 
domain_bit = 0x2
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x2
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x7 domain_bit = 0x2 Value 
to [dd7f973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x2 Value to [70f0f0fL]..
     - CPU 003f0200 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU126: Found redistributor in region 126 
@0000000042038000
     (XEN) CPU126: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 126 booted.
     (XEN) Bringing up CPU127
     NOTICE:  [D06_nopmu_pwr_domain_on]:[68L]
     NOTICE:  [scpi_set_css_power_state]:[249L] Modify S1 TB Boot 
Address to 3fc00000
     NOTICE:  [scpi_set_css_power_state]:[250L] ulpos_mpidr = 0x7 
domain_bit = 0x3
     NOTICE:  [scpi_set_css_power_state]:[299L] ulpos_mpidr = 0x7 
domain_bit = 0x3
     NOTICE:  [193l]Dieid = 0x7 ClusterID = 0x7 domain_bit = 0x3 Value 
to [ddff973dL]..
     NOTICE:  [158l]Dieid = 0x7 ClusterID = 0x7 ClustIdx = 0x1 
domain_bit = 0x3 Value to [f0f0f0fL]..
     - CPU 003f0300 booting -
     - Current EL 00000008 -
     - Initialize CPU -
     - Turning on paging -
     - Ready -
     (XEN) GICv3: CPU127: Found redistributor in region 127 
@0000000042079000
     (XEN) CPU127: Guest atomics will try 29 times before pausing the domain
     (XEN) CPU 127 booted.
     (XEN) Brought up 128 CPUs
     (XEN) I/O virtualisation disabled
     (XEN) P2M: 48-bit IPA with 48-bit PA and 16-bit VMID
     (XEN) P2M: 4 levels with order-0 root, VTCR 0x800d3590
     (XEN) Adding cpu 0 to runqueue 0
     (XEN)  First cpu on runqueue, activating
     (XEN) Adding cpu 1 to runqueue 0
     (XEN) Adding cpu 2 to runqueue 0
     (XEN) Adding cpu 3 to runqueue 0
     (XEN) Adding cpu 4 to runqueue 0
     (XEN) Adding cpu 5 to runqueue 0
     (XEN) Adding cpu 6 to runqueue 0
     (XEN) Adding cpu 7 to runqueue 0
     (XEN) Adding cpu 8 to runqueue 0
     (XEN) Adding cpu 9 to runqueue 0
     (XEN) Adding cpu 10 to runqueue 0
     (XEN) Adding cpu 11 to runqueue 0
     (XEN) Adding cpu 12 to runqueue 0
     (XEN) Adding cpu 13 to runqueue 0
     (XEN) Adding cpu 14 to runqueue 0
     (XEN) Adding cpu 15 to runqueue 0
     (XEN) Adding cpu 16 to runqueue 0
     (XEN) Adding cpu 17 to runqueue 0
     (XEN) Adding cpu 18 to runqueue 0
     (XEN) Adding cpu 19 to runqueue 0
     (XEN) Adding cpu 20 to runqueue 0
     (XEN) Adding cpu 21 to runqueue 0
     (XEN) Adding cpu 22 to runqueue 0
     (XEN) Adding cpu 23 to runqueue 0
     (XEN) Adding cpu 24 to runqueue 0
     (XEN) Adding cpu 25 to runqueue 0
     (XEN) Adding cpu 26 to runqueue 0
     (XEN) Adding cpu 27 to runqueue 0
     (XEN) Adding cpu 28 to runqueue 0
     (XEN) Adding cpu 29 to runqueue 0
     (XEN) Adding cpu 30 to runqueue 0
     (XEN) Adding cpu 31 to runqueue 0
     (XEN) Adding cpu 32 to runqueue 0
     (XEN) Adding cpu 33 to runqueue 0
     (XEN) Adding cpu 34 to runqueue 0
     (XEN) Adding cpu 35 to runqueue 0
     (XEN) Adding cpu 36 to runqueue 0
     (XEN) Adding cpu 37 to runqueue 0
     (XEN) Adding cpu 38 to runqueue 0
     (XEN) Adding cpu 39 to runqueue 0
     (XEN) Adding cpu 40 to runqueue 0
     (XEN) Adding cpu 41 to runqueue 0
     (XEN) Adding cpu 42 to runqueue 0
     (XEN) Adding cpu 43 to runqueue 0
     (XEN) Adding cpu 44 to runqueue 0
     (XEN) Adding cpu 45 to runqueue 0
     (XEN) Adding cpu 46 to runqueue 0
     (XEN) Adding cpu 47 to runqueue 0
     (XEN) Adding cpu 48 to runqueue 0
     (XEN) Adding cpu 49 to runqueue 0
     (XEN) Adding cpu 50 to runqueue 0
     (XEN) Adding cpu 51 to runqueue 0
     (XEN) Adding cpu 52 to runqueue 0
     (XEN) Adding cpu 53 to runqueue 0
     (XEN) Adding cpu 54 to runqueue 0
     (XEN) Adding cpu 55 to runqueue 0
     (XEN) Adding cpu 56 to runqueue 0
     (XEN) Adding cpu 57 to runqueue 0
     (XEN) Adding cpu 58 to runqueue 0
     (XEN) Adding cpu 59 to runqueue 0
     (XEN) Adding cpu 60 to runqueue 0
     (XEN) Adding cpu 61 to runqueue 0
     (XEN) Adding cpu 62 to runqueue 0
     (XEN) Adding cpu 63 to runqueue 0
     (XEN) Adding cpu 64 to runqueue 0
     (XEN) Adding cpu 65 to runqueue 0
     (XEN) Adding cpu 66 to runqueue 0
     (XEN) Adding cpu 67 to runqueue 0
     (XEN) Adding cpu 68 to runqueue 0
     (XEN) Adding cpu 69 to runqueue 0
     (XEN) Adding cpu 70 to runqueue 0
     (XEN) Adding cpu 71 to runqueue 0
     (XEN) Adding cpu 72 to runqueue 0
     (XEN) Adding cpu 73 to runqueue 0
     (XEN) Adding cpu 74 to runqueue 0
     (XEN) Adding cpu 75 to runqueue 0
     (XEN) Adding cpu 76 to runqueue 0
     (XEN) Adding cpu 77 to runqueue 0
     (XEN) Adding cpu 78 to runqueue 0
     (XEN) Adding cpu 79 to runqueue 0
     (XEN) Adding cpu 80 to runqueue 0
     (XEN) Adding cpu 81 to runqueue 0
     (XEN) Adding cpu 82 to runqueue 0
     (XEN) Adding cpu 83 to runqueue 0
     (XEN) Adding cpu 84 to runqueue 0
     (XEN) Adding cpu 85 to runqueue 0
     (XEN) Adding cpu 86 to runqueue 0
     (XEN) Adding cpu 87 to runqueue 0
     (XEN) Adding cpu 88 to runqueue 0
     (XEN) Adding cpu 89 to runqueue 0
     (XEN) Adding cpu 90 to runqueue 0
     (XEN) Adding cpu 91 to runqueue 0
     (XEN) Adding cpu 92 to runqueue 0
     (XEN) Adding cpu 93 to runqueue 0
     (XEN) Adding cpu 94 to runqueue 0
     (XEN) Adding cpu 95 to runqueue 0
     (XEN) Adding cpu 96 to runqueue 0
     (XEN) Adding cpu 97 to runqueue 0
     (XEN) Adding cpu 98 to runqueue 0
     (XEN) Adding cpu 99 to runqueue 0
     (XEN) Adding cpu 100 to runqueue 0
     (XEN) Adding cpu 101 to runqueue 0
     (XEN) Adding cpu 102 to runqueue 0
     (XEN) Adding cpu 103 to runqueue 0
     (XEN) Adding cpu 104 to runqueue 0
     (XEN) Adding cpu 105 to runqueue 0
     (XEN) Adding cpu 106 to runqueue 0
     (XEN) Adding cpu 107 to runqueue 0
     (XEN) Adding cpu 108 to runqueue 0
     (XEN) Adding cpu 109 to runqueue 0
     (XEN) Adding cpu 110 to runqueue 0
     (XEN) Adding cpu 111 to runqueue 0
     (XEN) Adding cpu 112 to runqueue 0
     (XEN) Adding cpu 113 to runqueue 0
     (XEN) Adding cpu 114 to runqueue 0
     (XEN) Adding cpu 115 to runqueue 0
     (XEN) Adding cpu 116 to runqueue 0
     (XEN) Adding cpu 117 to runqueue 0
     (XEN) Adding cpu 118 to runqueue 0
     (XEN) Adding cpu 119 to runqueue 0
     (XEN) Adding cpu 120 to runqueue 0
     (XEN) Adding cpu 121 to runqueue 0
     (XEN) Adding cpu 122 to runqueue 0
     (XEN) Adding cpu 123 to runqueue 0
     (XEN) Adding cpu 124 to runqueue 0
     (XEN) Adding cpu 125 to runqueue 0
     (XEN) Adding cpu 126 to runqueue 0
     (XEN) Adding cpu 127 to runqueue 0
     (XEN) alternatives: Patching with alt table 00000000002d4f38 -> 
00000000002d5754
     (XEN) *** LOADING DOMAIN 0 ***
     (XEN) Loading d0 kernel from boot module @ 0000000016257000
     (XEN) Allocating 1:1 mappings totalling 4096MB for dom0:
     (XEN) BANK[0] 0x00000008000000-0x00000010000000 (128MB)
     (XEN) BANK[1] 0x00000020000000-0x00000038000000 (384MB)
     (XEN) BANK[2] 0x00000050000000-0x00000080000000 (768MB)
     (XEN) BANK[3] 0x00202000000000-0x00202080000000 (2048MB)
     (XEN) BANK[4] 0x002020b0000000-0x002020c0000000 (256MB)
     (XEN) BANK[5] 0x00202600000000-0x00202620000000 (512MB)
     (XEN) Grant table range: 0x000000181ce000-0x0000001820e000
     (XEN) Allocating PPI 16 for event channel interrupt
     (XEN) Loading zImage from 0000000016257000 to 
0000000008080000-0000000009981200
     (XEN) Loading d0 DTB to 0x000000000fe00000-0x000000000fe0025b
     (XEN) Initial low memory virq threshold set at 0x4000 pages.
     (XEN) Scrubbing Free RAM in background
     (XEN) Std. Loglevel: All
     (XEN) Guest Loglevel: All
     (XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch 
input)
     (XEN) Freed 340kB init memory.
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER4
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER8
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER12
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER16
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER20
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER24
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER28
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER32
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER36
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER40
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER44
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER48
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER52
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER56
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER60
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER64
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER68
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER72
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER76
     (XEN) d0v0: vGICD: unhandled word write 0x000000ffffffff to ICACTIVER80
     (XEN) d0v0: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v1: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v2: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v3: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v4: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v5: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v6: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v7: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v8: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v9: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v10: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v11: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v12: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v13: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v14: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v15: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v16: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v17: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v18: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v19: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v20: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v21: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v22: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v23: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v24: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v25: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v26: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v27: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v28: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v29: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v30: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v31: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v32: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v33: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v34: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v35: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v36: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v37: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v38: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v39: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v40: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v41: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v42: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v43: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v44: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v45: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v46: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v47: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v48: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v49: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v50: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v51: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v52: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v53: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v54: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v55: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v56: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v57: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v58: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v59: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v60: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v61: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v62: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v63: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v64: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v65: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v66: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v67: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v68: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v69: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v70: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v71: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v72: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v73: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v74: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v75: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v76: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v77: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v78: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v79: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v80: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v81: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v82: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v83: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v84: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v85: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v86: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v87: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v88: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v89: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v90: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v91: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v92: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v93: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v94: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v95: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v96: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v97: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v98: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v99: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v100: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v101: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v102: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v103: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v104: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v105: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v106: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v107: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v108: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v109: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v110: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v111: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v112: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v113: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v114: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v115: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v116: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v117: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v118: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v119: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v120: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v121: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v122: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v123: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v124: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v125: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v126: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) d0v127: vGICR: SGI: unhandled word write 0x000000ffffffff to 
ICACTIVER0
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=25: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     (XEN) physdev.c:16:d0v0 PHYSDEVOP cmd=15: not implemented
     [    0.000000] Booting Linux on physical CPU 0x0000000000 [0x481fd010]
     [    0.000000] Linux version 5.5.0-rc5 (joyx@Turing-Arch-b) (gcc 
version 4.9.1 20140505 (prerelease) (crosstool-NG 
linaro-1.13.1-4.9-2014.05 - Linaro GCC 4.9-2014.05)) #132 SMP PREEMPT 
Tue Jan 7 15:43:06 CST 2020
     [    0.000000] Xen XEN_VERSION.XEN_SUBVERSION support found
     [    0.000000] efi: Getting EFI parameters from FDT:
     [    0.000000] efi: EFI v2.50 by Xen
     [    0.000000] efi:  ACPI 2.0=0x181d0e70
     [    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
     [    0.000000] ACPI: Early table checksum verification disabled
     [    0.000000] ACPI: RSDP 0x00000000181D0E70 000024 (v02 HISI  )
     [    0.000000] ACPI: XSDT 0x00000000181D0DB0 0000BC (v01 HISI 
HIP08    00000000      01000013)
     [    0.000000] ACPI: FACP 0x00000000181CE000 000114 (v06 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: DSDT 0x0000000039630000 00A84D (v02 HISI 
HIP08    00000000 INTL 20181213)
     [    0.000000] ACPI: PCCT 0x0000000039DC0000 00008A (v01 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: SSDT 0x0000000039DB0000 00E56A (v02 HISI 
HIP07    00000000 INTL 20181213)
     [    0.000000] ACPI: BERT 0x0000000039D80000 000030 (v01 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: HEST 0x0000000039D60000 00058C (v01 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: ERST 0x0000000039D20000 000230 (v01 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: EINJ 0x0000000039D10000 000170 (v01 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: GTDT 0x0000000039900000 000084 (v03 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: MCFG 0x0000000039680000 00003C (v01 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: SLIT 0x0000000039670000 00003C (v01 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: SPCR 0x0000000039660000 000050 (v02 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: SRAT 0x0000000039650000 0009C0 (v03 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: APIC 0x00000000181CE118 002C6C (v04 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: IORT 0x0000000039620000 001060 (v00 HISI 
HIP08    00000000 INTL 20181213)
     [    0.000000] ACPI: PPTT 0x0000000018540000 0037E4 (v02 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: MPAM 0x0000000018550000 00063C (v01 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: SPMI 0x0000000018530000 000041 (v05 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: iBFT 0x0000000018510000 000800 (v01 HISI 
HIP08    00000000      00000000)
     [    0.000000] ACPI: STAO 0x00000000181D0D88 000025 (v01 HISI 
HIP08    00000000 HISI 20151124)
     [    0.000000] ACPI: SPCR: console: uart,mmio,0x3f00002f8,115200
     [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x2080000000-0x27ffffffff]
     [    0.000000] ACPI: SRAT: Node 1 PXM 1 [mem 0x00000000-0x7fffffff]
     [    0.000000] ACPI: SRAT: Node 3 PXM 3 [mem 
0x202000000000-0x2027ffffffff]
     [    0.000000] NUMA: Initmem setup node 0 [<memory-less node>]
     [    0.000000] NUMA: NODE_DATA [mem 0x20261f7f1100-0x20261f7f2fff]
     [    0.000000] NUMA: NODE_DATA(0) on node 3
     [    0.000000] NUMA: NODE_DATA [mem 0x7dffe100-0x7dffffff]
     [    0.000000] NUMA: Initmem setup node 2 [<memory-less node>]
     [    0.000000] NUMA: NODE_DATA [mem 0x20261f7ef200-0x20261f7f10ff]
     [    0.000000] NUMA: NODE_DATA(2) on node 3
     [    0.000000] NUMA: NODE_DATA [mem 0x20261f7ed300-0x20261f7ef1ff]
     [    0.000000] Zone ranges:
     [    0.000000]   DMA      [mem 0x0000000008000000-0x000000003fffffff]
     [    0.000000]   DMA32    [mem 0x0000000040000000-0x00000000ffffffff]
     [    0.000000]   Normal   [mem 0x0000000100000000-0x000020261fffffff]
     [    0.000000] Movable zone start for each node
     [    0.000000] Early memory node ranges
     [    0.000000]   node   1: [mem 0x0000000008000000-0x000000000fffffff]
     [    0.000000]   node   1: [mem 0x00000000181ce000-0x00000000181d1fff]
     [    0.000000]   node   1: [mem 0x0000000018510000-0x000000001851ffff]
     [    0.000000]   node   1: [mem 0x0000000018530000-0x000000001855ffff]
     [    0.000000]   node   1: [mem 0x0000000020000000-0x0000000037ffffff]
     [    0.000000]   node   1: [mem 0x0000000039620000-0x000000003968ffff]
     [    0.000000]   node   1: [mem 0x0000000039900000-0x000000003990ffff]
     [    0.000000]   node   1: [mem 0x0000000039920000-0x000000003992ffff]
     [    0.000000]   node   1: [mem 0x0000000039d10000-0x0000000039d2ffff]
     [    0.000000]   node   1: [mem 0x0000000039d60000-0x0000000039d6ffff]
     [    0.000000]   node   1: [mem 0x0000000039d80000-0x0000000039d8ffff]
     [    0.000000]   node   1: [mem 0x0000000039db0000-0x0000000039deffff]
     [    0.000000]   node   1: [mem 0x0000000050000000-0x000000007fffffff]
     [    0.000000]   node   3: [mem 0x0000202000000000-0x000020207fffffff]
     [    0.000000]   node   3: [mem 0x00002020b0000000-0x00002020bfffffff]
     [    0.000000]   node   3: [mem 0x0000202600000000-0x000020261fffffff]
     [    0.000000] Could not find start_pfn for node 0
     [    0.000000] Initmem setup node 0 [mem 
0x0000000000000000-0x0000000000000000]
     [    0.000000] Initmem setup node 1 [mem 
0x0000000008000000-0x000000007fffffff]
     [    0.000000] Could not find start_pfn for node 2
     [    0.000000] Initmem setup node 2 [mem 
0x0000000000000000-0x0000000000000000]
     [    0.000000] Initmem setup node 3 [mem 
0x0000202000000000-0x000020261fffffff]
     [    0.000000] psci: probing for conduit method from ACPI.
     [    0.000000] psci: PSCIv1.1 detected in firmware.
     [    0.000000] psci: Using standard PSCI v0.2 function IDs
     [    0.000000] psci: Trusted OS migration not required
     [    0.000000] psci: SMC Calling Convention v1.1
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x0 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x1 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x2 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x3 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x4 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x5 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x6 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x7 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x8 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x9 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0xa -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0xb -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0xc -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0xd -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0xe -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0xf -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x100 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x101 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x102 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x103 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x104 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x105 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x106 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x107 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x108 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x109 -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10a -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10b -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10c -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10d -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10e -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 0 -> MPIDR 0x10f -> Node 0
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x200 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x201 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x202 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x203 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x204 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x205 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x206 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x207 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x208 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x209 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x20a -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x20b -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x20c -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x20d -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x20e -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x20f -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x300 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x301 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x302 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x303 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x304 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x305 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x306 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x307 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x308 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x309 -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30a -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30b -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30c -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30d -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30e -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 1 -> MPIDR 0x30f -> Node 1
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x400 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x401 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x402 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x403 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x404 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x405 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x406 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x407 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x408 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x409 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x40a -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x40b -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x40c -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x40d -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x40e -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x40f -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x500 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x501 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x502 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x503 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x504 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x505 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x506 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x507 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x508 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x509 -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50a -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50b -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50c -> Node 2
     [    0.000000] ACPI NUMA: SRAT: PXM 2 -> MPIDR 0x50d -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50e -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 2 -> MPIDR 0x50f -> Node 2
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x600 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x601 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x602 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x603 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x604 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x605 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x606 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x607 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x608 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x609 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x60a -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x60b -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x60c -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x60d -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x60e -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x60f -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x700 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x701 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x702 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x703 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x704 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x705 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x706 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x707 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x708 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x709 -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x70a -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x70b -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x70c -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x70d -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x70e -> Node 3
     [    0.000000] ACPI: NUMA: SRAT: PXM 3 -> MPIDR 0x70f -> Node 3
     [    0.000000] percpu: Embedded 22 pages/cpu s53120 r8192 d28800 u90112
     [    0.000000] Detected VIPT I-cache on CPU0
     [    0.000000] CPU features: detected: GIC system register CPU 
interface
     [    0.000000] CPU features: detected: Hardware dirty bit management
     [    0.000000] Built 4 zonelists, mobility grouping on.  Total 
pages: 1032526
     [    0.000000] Policy zone: Normal
     [    0.000000] Kernel command line: rdinit=/init acpi=force 
noinitrd root=/dev/sdb1 rw
     [    0.000000] printk: log_buf_len individual max cpu contribution: 
4096 bytes
     [    0.000000] printk: log_buf_len total cpu_extra contributions: 
520192 bytes
     [    0.000000] printk: log_buf_len min size: 131072 bytes
     [    0.000000] printk: log_buf_len: 1048576 bytes
     [    0.000000] printk: early log buf free: 113908(86%)
     [    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
     [    0.000000] software IO TLB: mapped [mem 0x34000000-0x38000000] 
(64MB)
     [    0.000000] Memory: 3950632K/4195664K available (11836K kernel 
code, 1924K rwdata, 6580K rodata, 5184K init, 460K bss, 212264K 
reserved, 32768K cma-reserved)
     [    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=128, 
Nodes=4
     [    0.000000] rcu: Preemptible hierarchical RCU implementation.
     [    0.000000] rcu:     RCU restricting CPUs from NR_CPUS=256 to 
nr_cpu_ids=128.
     [    0.000000]  Tasks RCU enabled.
     [    0.000000] rcu: RCU calculated value of scheduler-enlistment 
delay is 25 jiffies.
     [    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, 
nr_cpu_ids=128
     [    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
     [    0.000000] GICv3: 640 SPIs implemented
     [    0.000000] GICv3: 0 Extended SPIs implemented
     [    0.000000] GICv3: Distributor has no Range Selector support
     [    0.000000] GICv3: 16 PPIs implemented
     [    0.000000] GICv3: no VLPI support, no direct LPI support
     [    0.000000] GICv3: CPU0: found redistributor 0 region 
0:0x00000000ae100000
     [    0.000000] SRAT: PXM 0 -> ITS 0 -> Node 0
     [    0.000000] SRAT: PXM 2 -> ITS 1 -> Node 2
     [    0.000000] ITS [mem 0x202100000-0x20211ffff]
     [    0.000000] ITS@0x0000000202100000: allocated 65536 Devices 
@7d180000 (flat, esz 8, psz 64K, shr 1)
     [    0.000000] ITS@0x0000000202100000: allocated 32768 Interrupt 
Collections @7d160000 (flat, esz 2, psz 64K, shr 1)
     [    0.000000] ITS [mem 0x200202100000-0x20020211ffff]
     [    0.000000] ITS@0x0000200202100000: allocated 65536 Devices 
@20261a880000 (flat, esz 8, psz 64K, shr 1)
     [    0.000000] ITS@0x0000200202100000: allocated 32768 Interrupt 
Collections @20261a820000 (flat, esz 2, psz 64K, shr 1)
     [    0.000000] ------------[ cut here ]------------
     [    0.000000] WARNING: CPU: 0 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:1877 
its_init+0x36c/0x5f8
     [    0.000000] Modules linked in:
     [    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.5.0-rc5 #132
     [    0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO)
     [    0.000000] pc : its_init+0x36c/0x5f8
     [    0.000000] lr : its_init+0x368/0x5f8
     [    0.000000] sp : ffff8000117a3c70
     [    0.000000] x29: ffff8000117a3c70 x28: ffff8000117a3ea0
     [    0.000000] x27: ffff800011d80000 x26: ffff00007d14c000
     [    0.000000] x25: ffff8000117ad140 x24: ffff8000117a9000
     [    0.000000] x23: ffff8000117db000 x22: ffff8000119cdd30
     [    0.000000] x21: ffff8000119cd000 x20: ffff8000117ad140
     [    0.000000] x19: ffff8000119cd000 x18: ffff800013dfffff
     [    0.000000] x17: 0140000000000000 x16: 0000008000000000
     [    0.000000] x15: ffff800013dfffff x14: 324020736e6f6974
     [    0.000000] x13: ffff00007dffea20 x12: 0000000000000000
     [    0.000000] x11: 0000000000000000 x10: ffff00007dffea00
     [    0.000000] x9 : ffff00007dffe9f0 x8 : ffff00007d180000
     [    0.000000] x7 : a2a2a2a2a2a2a2a2 x6 : ffff8000117a3a40
     [    0.000000] x5 : 0000000000000000 x4 : 0000000000000000
     [    0.000000] x3 : 0000000000000010 x2 : 0000000000000000
     [    0.000000] x1 : 00000000ffffffed x0 : 00000000ffffffed
     [    0.000000] Call trace:
     [    0.000000]  its_init+0x36c/0x5f8
     [    0.000000]  gic_init_bases+0x4b0/0x50c
     [    0.000000]  gic_acpi_init+0x138/0x270
     [    0.000000]  acpi_match_madt+0x44/0x78
     [    0.000000]  acpi_table_parse_entries_array+0x1a8/0x24c
     [    0.000000]  acpi_table_parse_entries+0x34/0x54
     [    0.000000]  acpi_table_parse_madt+0x28/0x30
     [    0.000000]  __acpi_probe_device_table+0x90/0xe8
     [    0.000000]  irqchip_init+0x34/0x3c
     [    0.000000]  init_IRQ+0x104/0x198
     [    0.000000]  start_kernel+0x278/0x450
     [    0.000000] random: get_random_bytes called from 
print_oops_end_marker+0x48/0x64 with crng_init=0
     [    0.000000] ---[ end trace 0000000000000000 ]---
     [    0.000000] GICv3: using LPI property table @0x000000007d170000
     [    0.000000] ------------[ cut here ]------------
     [    0.000000] WARNING: CPU: 0 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.000000] Modules linked in:
     [    0.000000] CPU: 0 PID: 0 Comm: swapper/0 Tainted: G W         
5.5.0-rc5 #132
     [    0.000000] pstate: 60000085 (nZCv daIf -PAN -UAO)
     [    0.000000] pc : its_cpu_init+0x2f0/0x494
     [    0.000000] lr : its_cpu_init+0x2ec/0x494
     [    0.000000] sp : ffff8000117a3cb0
     [    0.000000] x29: ffff8000117a3cb0 x28: ffff8000117a3ea0
     [    0.000000] x27: ffff800011d80000 x26: 0000000000000000
     [    0.000000] x25: 0000000000000040 x24: ffff800011dc0000
     [    0.000000] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.000000] x21: ffff8000117a9000 x20: fffffe0001d48000
     [    0.000000] x19: ffff8000117db000 x18: ffff800013dfffff
     [    0.000000] x17: 0140000000000000 x16: 0000008000000000
     [    0.000000] x15: ffff800013dfffff x14: 324020736e6f6974
     [    0.000000] x13: ffff00007dffea20 x12: 0000000000000000
     [    0.000000] x11: 0000000000000000 x10: ffff00007dffea00
     [    0.000000] x9 : ffff00007dffe9f0 x8 : ffff00007dffe9e0
     [    0.000000] x7 : ffffa0260e14c000 x6 : ffff8000117a3a30
     [    0.000000] x5 : ffff8000117db930 x4 : ffffa0260e14c000
     [    0.000000] x3 : 000000000000003d x2 : 0000000000000000
     [    0.000000] x1 : 00000000ffffffed x0 : 00000000ffffffed
     [    0.000000] Call trace:
     [    0.000000]  its_cpu_init+0x2f0/0x494
     [    0.000000]  gic_init_bases+0x4b4/0x50c
     [    0.000000]  gic_acpi_init+0x138/0x270
     [    0.000000]  acpi_match_madt+0x44/0x78
     [    0.000000]  acpi_table_parse_entries_array+0x1a8/0x24c
     [    0.000000]  acpi_table_parse_entries+0x34/0x54
     [    0.000000]  acpi_table_parse_madt+0x28/0x30
     [    0.000000]  __acpi_probe_device_table+0x90/0xe8
     [    0.000000]  irqchip_init+0x34/0x3c
     [    0.000000]  init_IRQ+0x104/0x198
     [    0.000000]  start_kernel+0x278/0x450
     [    0.000000] ---[ end trace f68728a0d3053b52 ]---
     [    0.000000] GICv3: CPU0: using allocated LPI pending table 
@0x000000007d200000
     [    0.000000] arch_timer: cp15 timer(s) running at 100.00MHz (virt).
     [    0.000000] clocksource: arch_sys_counter: mask: 
0xffffffffffffff max_cycles: 0x171024e7e0, max_idle_ns: 440795205315 ns
     [    0.000001] sched_clock: 56 bits at 100MHz, resolution 10ns, 
wraps every 4398046511100ns
     [    0.000155] Console: colour dummy device 80x25
     [    0.000229] mempolicy: Enabling automatic NUMA balancing. 
Configure with numa_balancing= or the kernel.numa_balancing sysctl
     [    0.000241] ACPI: Core revision 20191018
     [    0.000430] Calibrating delay loop (skipped), value calculated 
using timer frequency.. 200.00 BogoMIPS (lpj=400000)
     [    0.000433] pid_max: default: 131072 minimum: 1024
     [    0.000496] LSM: Security Framework initializing
     [    0.001322] Dentry cache hash table entries: 524288 (order: 10, 
4194304 bytes, vmalloc)
     [    0.001744] Inode-cache hash table entries: 262144 (order: 9, 
2097152 bytes, vmalloc)
     [    0.001779] Mount-cache hash table entries: 8192 (order: 4, 
65536 bytes, vmalloc)
     [    0.001795] Mountpoint-cache hash table entries: 8192 (order: 4, 
65536 bytes, vmalloc)
     [    0.032065] ASID allocator initialised with 32768 entries
     [    0.032361] xen:grant_table: Grant tables using version 1 layout
     [    0.032392] Grant table initialized
     [    0.032499] xen:events: Using FIFO-based ABI
     [    0.032518] Xen: initializing cpu0
     [    0.040076] rcu: Hierarchical SRCU implementation.
     [    0.048102] Platform MSI: ITS@0x202100000 domain created
     [    0.048104] Platform MSI: ITS@0x200202100000 domain created
     [    0.048109] PCI/MSI: ITS@0x202100000 domain created
     [    0.048111] PCI/MSI: ITS@0x200202100000 domain created
     [    0.048121] EFI runtime services access via paravirt.
     [    0.056104] smp: Bringing up secondary CPUs ...
     [    0.088196] Detected VIPT I-cache on CPU1
     [    0.088205] GICv3: CPU1: found redistributor 1 region 
0:0x00000000ae120000
     [    0.094808] ------------[ cut here ]------------
     [    0.094813] WARNING: CPU: 1 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.094813] Modules linked in:
     [    0.094816] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G W         
5.5.0-rc5 #132
     [    0.094818] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.094819] pc : its_cpu_init+0x2f0/0x494
     [    0.094821] lr : its_cpu_init+0x2ec/0x494
     [    0.094821] sp : ffff800011eb3ee0
     [    0.094822] x29: ffff800011eb3ee0 x28: 0000000000000000
     [    0.094823] x27: 0000000000000000 x26: 0000000000000000
     [    0.094824] x25: 0000000000000000 x24: ffff800011de0000
     [    0.094825] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.094826] x21: ffff8000117a9000 x20: fffffe0001d48400
     [    0.094827] x19: ffff8000117db000 x18: 0000000000000000
     [    0.094828] x17: 0000000000000000 x16: 0000000000000000
     [    0.094829] x15: 0000000000000000 x14: 0000000000000000
     [    0.094830] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.094831] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.094832] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.094833] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.094834] x5 : 00000000a0a0a0a0 x4 : ffffa0260e162000
     [    0.094835] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.094836] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.094837] Call trace:
     [    0.094839]  its_cpu_init+0x2f0/0x494
     [    0.094840]  gic_starting_cpu+0x18/0x24
     [    0.094842]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.094843]  notify_cpu_starting+0x9c/0xb8
     [    0.094845]  secondary_start_kernel+0xdc/0x168
     [    0.094845] ---[ end trace f68728a0d3053b53 ]---
     [    0.094850] GICv3: CPU1: using allocated LPI pending table 
@0x000000007d210000
     [    0.094875] Xen: initializing cpu1
     [    0.094883] CPU1: Booted secondary processor 0x0000000001 
[0x481fd010]
     [    0.124231] Detected VIPT I-cache on CPU2
     [    0.124240] GICv3: CPU2: found redistributor 2 region 
1:0x00000000ae140000
     [    0.130838] ------------[ cut here ]------------
     [    0.130841] WARNING: CPU: 2 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.130842] Modules linked in:
     [    0.130844] CPU: 2 PID: 0 Comm: swapper/2 Tainted: G W         
5.5.0-rc5 #132
     [    0.130845] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.130847] pc : its_cpu_init+0x2f0/0x494
     [    0.130849] lr : its_cpu_init+0x2ec/0x494
     [    0.130849] sp : ffff800011ebbee0
     [    0.130850] x29: ffff800011ebbee0 x28: 0000000000000000
     [    0.130851] x27: 0000000000000000 x26: 0000000000000000
     [    0.130852] x25: 0000000000000000 x24: ffff800011e40000
     [    0.130853] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.130854] x21: ffff8000117a9000 x20: fffffe0001d48800
     [    0.130855] x19: ffff8000117db000 x18: 0000000000000000
     [    0.130856] x17: 0000000000000000 x16: 0000000000000000
     [    0.130857] x15: 0000000000000000 x14: 0000000000000000
     [    0.130858] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.130859] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.130861] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.130861] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.130862] x5 : 00000000a0a0a0a0 x4 : ffffa0260e178000
     [    0.130863] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.130864] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.130865] Call trace:
     [    0.130867]  its_cpu_init+0x2f0/0x494
     [    0.130868]  gic_starting_cpu+0x18/0x24
     [    0.130869]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.130871]  notify_cpu_starting+0x9c/0xb8
     [    0.130872]  secondary_start_kernel+0xdc/0x168
     [    0.130873] ---[ end trace f68728a0d3053b54 ]---
     [    0.130878] GICv3: CPU2: using allocated LPI pending table 
@0x000000007d220000
     [    0.130899] Xen: initializing cpu2
     [    0.130906] CPU2: Booted secondary processor 0x0000000002 
[0x481fd010]
     [    0.160280] Detected VIPT I-cache on CPU3
     [    0.160289] GICv3: CPU3: found redistributor 3 region 
1:0x00000000ae160000
     [    0.166888] ------------[ cut here ]------------
     [    0.166891] WARNING: CPU: 3 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.166891] Modules linked in:
     [    0.166893] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G W         
5.5.0-rc5 #132
     [    0.166895] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.166896] pc : its_cpu_init+0x2f0/0x494
     [    0.166898] lr : its_cpu_init+0x2ec/0x494
     [    0.166898] sp : ffff800011f0bee0
     [    0.166899] x29: ffff800011f0bee0 x28: 0000000000000000
     [    0.166900] x27: 0000000000000000 x26: 0000000000000000
     [    0.166901] x25: 0000000000000000 x24: ffff800011e60000
     [    0.166902] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.166903] x21: ffff8000117a9000 x20: fffffe0001d48c00
     [    0.166904] x19: ffff8000117db000 x18: 0000000000000000
     [    0.166905] x17: 0000000000000000 x16: 0000000000000000
     [    0.166906] x15: 0000000000000000 x14: 0000000000000000
     [    0.166908] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.166908] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.166910] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.166911] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.166911] x5 : 00000000a0a0a0a0 x4 : ffffa0260e18e000
     [    0.166912] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.166913] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.166914] Call trace:
     [    0.166916]  its_cpu_init+0x2f0/0x494
     [    0.166917]  gic_starting_cpu+0x18/0x24
     [    0.166919]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.166920]  notify_cpu_starting+0x9c/0xb8
     [    0.166921]  secondary_start_kernel+0xdc/0x168
     [    0.166922] ---[ end trace f68728a0d3053b55 ]---
     [    0.166927] GICv3: CPU3: using allocated LPI pending table 
@0x000000007d230000
     [    0.166948] Xen: initializing cpu3
     [    0.166956] CPU3: Booted secondary processor 0x0000000003 
[0x481fd010]
     [    0.196342] Detected VIPT I-cache on CPU4
     [    0.196358] GICv3: CPU4: found redistributor 4 region 
2:0x00000000ae180000
     [    0.202966] ------------[ cut here ]------------
     [    0.202972] WARNING: CPU: 4 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.202973] Modules linked in:
     [    0.202976] CPU: 4 PID: 0 Comm: swapper/4 Tainted: G W         
5.5.0-rc5 #132
     [    0.202978] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.202979] pc : its_cpu_init+0x2f0/0x494
     [    0.202981] lr : its_cpu_init+0x2ec/0x494
     [    0.202981] sp : ffff800011f13ee0
     [    0.202982] x29: ffff800011f13ee0 x28: 0000000000000000
     [    0.202983] x27: 0000000000000000 x26: 0000000000000000
     [    0.202984] x25: 0000000000000000 x24: ffff800011ec0000
     [    0.202985] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.202986] x21: ffff8000117a9000 x20: fffffe0001d49000
     [    0.202987] x19: ffff8000117db000 x18: 0000000000000000
     [    0.202988] x17: 0000000000000000 x16: 0000000000000000
     [    0.202990] x15: 0000000000000000 x14: 0000000000000000
     [    0.202991] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.202992] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.202993] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.202994] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.202995] x5 : 00000000a0a0a0a0 x4 : ffffa0260e1a4000
     [    0.202996] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.202997] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.202998] Call trace:
     [    0.203000]  its_cpu_init+0x2f0/0x494
     [    0.203001]  gic_starting_cpu+0x18/0x24
     [    0.203003]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.203004]  notify_cpu_starting+0x9c/0xb8
     [    0.203006]  secondary_start_kernel+0xdc/0x168
     [    0.203007] ---[ end trace f68728a0d3053b56 ]---
     [    0.203013] GICv3: CPU4: using allocated LPI pending table 
@0x000000007d240000
     [    0.203044] Xen: initializing cpu4
     [    0.203054] CPU4: Booted secondary processor 0x0000000004 
[0x481fd010]
     [    0.232377] Detected VIPT I-cache on CPU5
     [    0.232391] GICv3: CPU5: found redistributor 5 region 
2:0x00000000ae1a0000
     [    0.238990] ------------[ cut here ]------------
     [    0.238994] WARNING: CPU: 5 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.238994] Modules linked in:
     [    0.238997] CPU: 5 PID: 0 Comm: swapper/5 Tainted: G W         
5.5.0-rc5 #132
     [    0.238998] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.238999] pc : its_cpu_init+0x2f0/0x494
     [    0.239001] lr : its_cpu_init+0x2ec/0x494
     [    0.239001] sp : ffff800011f1bee0
     [    0.239002] x29: ffff800011f1bee0 x28: 0000000000000000
     [    0.239003] x27: 0000000000000000 x26: 0000000000000000
     [    0.239004] x25: 0000000000000000 x24: ffff800011ee0000
     [    0.239005] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.239006] x21: ffff8000117a9000 x20: fffffe0001d49400
     [    0.239007] x19: ffff8000117db000 x18: 0000000000000000
     [    0.239008] x17: 0000000000000000 x16: 0000000000000000
     [    0.239009] x15: 0000000000000000 x14: 0000000000000000
     [    0.239010] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.239011] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.239012] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.239013] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.239014] x5 : 00000000a0a0a0a0 x4 : ffffa0260e1ba000
     [    0.239015] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.239015] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.239017] Call trace:
     [    0.239018]  its_cpu_init+0x2f0/0x494
     [    0.239019]  gic_starting_cpu+0x18/0x24
     [    0.239021]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.239022]  notify_cpu_starting+0x9c/0xb8
     [    0.239024]  secondary_start_kernel+0xdc/0x168
     [    0.239024] ---[ end trace f68728a0d3053b57 ]---
     [    0.239030] GICv3: CPU5: using allocated LPI pending table 
@0x000000007d250000
     [    0.239051] Xen: initializing cpu5
     [    0.239059] CPU5: Booted secondary processor 0x0000000005 
[0x481fd010]
     [    0.268428] Detected VIPT I-cache on CPU6
     [    0.268443] GICv3: CPU6: found redistributor 6 region 
3:0x00000000ae1c0000
     [    0.275042] ------------[ cut here ]------------
     [    0.275045] WARNING: CPU: 6 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.275046] Modules linked in:
     [    0.275048] CPU: 6 PID: 0 Comm: swapper/6 Tainted: G W         
5.5.0-rc5 #132
     [    0.275049] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.275051] pc : its_cpu_init+0x2f0/0x494
     [    0.275052] lr : its_cpu_init+0x2ec/0x494
     [    0.275053] sp : ffff800011f23ee0
     [    0.275053] x29: ffff800011f23ee0 x28: 0000000000000000
     [    0.275054] x27: 0000000000000000 x26: 0000000000000000
     [    0.275055] x25: 0000000000000000 x24: ffff800011f40000
     [    0.275056] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.275058] x21: ffff8000117a9000 x20: fffffe0001d49800
     [    0.275059] x19: ffff8000117db000 x18: 0000000000000000
     [    0.275060] x17: 0000000000000000 x16: 0000000000000000
     [    0.275061] x15: 0000000000000000 x14: 0000000000000000
     [    0.275062] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.275063] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.275064] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.275065] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.275066] x5 : 00000000a0a0a0a0 x4 : ffffa0260e1d0000
     [    0.275067] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.275068] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.275069] Call trace:
     [    0.275071]  its_cpu_init+0x2f0/0x494
     [    0.275072]  gic_starting_cpu+0x18/0x24
     [    0.275073]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.275074]  notify_cpu_starting+0x9c/0xb8
     [    0.275076]  secondary_start_kernel+0xdc/0x168
     [    0.275077] ---[ end trace f68728a0d3053b58 ]---
     [    0.275082] GICv3: CPU6: using allocated LPI pending table 
@0x000000007d260000
     [    0.275103] Xen: initializing cpu6
     [    0.275110] CPU6: Booted secondary processor 0x0000000006 
[0x481fd010]
     [    0.304479] Detected VIPT I-cache on CPU7
     [    0.304495] GICv3: CPU7: found redistributor 7 region 
3:0x00000000ae1e0000
     [    0.311094] ------------[ cut here ]------------
     [    0.311098] WARNING: CPU: 7 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.311098] Modules linked in:
     [    0.311100] CPU: 7 PID: 0 Comm: swapper/7 Tainted: G W         
5.5.0-rc5 #132
     [    0.311102] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.311103] pc : its_cpu_init+0x2f0/0x494
     [    0.311105] lr : its_cpu_init+0x2ec/0x494
     [    0.311105] sp : ffff800011f2bee0
     [    0.311106] x29: ffff800011f2bee0 x28: 0000000000000000
     [    0.311107] x27: 0000000000000000 x26: 0000000000000000
     [    0.311108] x25: 0000000000000000 x24: ffff800011f60000
     [    0.311109] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.311110] x21: ffff8000117a9000 x20: fffffe0001d49c00
     [    0.311111] x19: ffff8000117db000 x18: 0000000000000000
     [    0.311112] x17: 0000000000000000 x16: 0000000000000000
     [    0.311113] x15: 0000000000000000 x14: 0000000000000000
     [    0.311114] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.311115] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.311116] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.311116] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.311118] x5 : 00000000a0a0a0a0 x4 : ffffa0260e1e6000
     [    0.311119] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.311120] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.311121] Call trace:
     [    0.311122]  its_cpu_init+0x2f0/0x494
     [    0.311124]  gic_starting_cpu+0x18/0x24
     [    0.311125]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.311126]  notify_cpu_starting+0x9c/0xb8
     [    0.311128]  secondary_start_kernel+0xdc/0x168
     [    0.311129] ---[ end trace f68728a0d3053b59 ]---
     [    0.311134] GICv3: CPU7: using allocated LPI pending table 
@0x000000007d270000
     [    0.311154] Xen: initializing cpu7
     [    0.311162] CPU7: Booted secondary processor 0x0000000007 
[0x481fd010]
     [    0.340545] Detected VIPT I-cache on CPU8
     [    0.340566] GICv3: CPU8: found redistributor 8 region 
4:0x00000000ae200000
     [    0.347171] ------------[ cut here ]------------
     [    0.347176] WARNING: CPU: 8 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.347177] Modules linked in:
     [    0.347180] CPU: 8 PID: 0 Comm: swapper/8 Tainted: G W         
5.5.0-rc5 #132
     [    0.347181] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.347183] pc : its_cpu_init+0x2f0/0x494
     [    0.347184] lr : its_cpu_init+0x2ec/0x494
     [    0.347185] sp : ffff800011f33ee0
     [    0.347185] x29: ffff800011f33ee0 x28: 0000000000000000
     [    0.347187] x27: 0000000000000000 x26: 0000000000000000
     [    0.347188] x25: 0000000000000000 x24: ffff800011fc0000
     [    0.347189] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.347190] x21: ffff8000117a9000 x20: fffffe0001d4a000
     [    0.347191] x19: ffff8000117db000 x18: 0000000000000000
     [    0.347192] x17: 0000000000000000 x16: 0000000000000000
     [    0.347193] x15: 0000000000000000 x14: 0000000000000000
     [    0.347194] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.347195] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.347196] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.347197] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.347198] x5 : 00000000a0a0a0a0 x4 : ffffa0260e1fc000
     [    0.347198] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.347199] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.347201] Call trace:
     [    0.347202]  its_cpu_init+0x2f0/0x494
     [    0.347204]  gic_starting_cpu+0x18/0x24
     [    0.347205]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.347206]  notify_cpu_starting+0x9c/0xb8
     [    0.347208]  secondary_start_kernel+0xdc/0x168
     [    0.347209] ---[ end trace f68728a0d3053b5a ]---
     [    0.347214] GICv3: CPU8: using allocated LPI pending table 
@0x000000007d280000
     [    0.347241] Xen: initializing cpu8
     [    0.347250] CPU8: Booted secondary processor 0x0000000008 
[0x481fd010]
     [    0.376583] Detected VIPT I-cache on CPU9
     [    0.376601] GICv3: CPU9: found redistributor 9 region 
4:0x00000000ae220000
     [    0.383200] ------------[ cut here ]------------
     [    0.383204] WARNING: CPU: 9 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.383205] Modules linked in:
     [    0.383207] CPU: 9 PID: 0 Comm: swapper/9 Tainted: G W         
5.5.0-rc5 #132
     [    0.383208] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.383210] pc : its_cpu_init+0x2f0/0x494
     [    0.383211] lr : its_cpu_init+0x2ec/0x494
     [    0.383212] sp : ffff800011f8bee0
     [    0.383213] x29: ffff800011f8bee0 x28: 0000000000000000
     [    0.383214] x27: 0000000000000000 x26: 0000000000000000
     [    0.383215] x25: 0000000000000000 x24: ffff800011fe0000
     [    0.383216] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.383217] x21: ffff8000117a9000 x20: fffffe0001d4a400
     [    0.383218] x19: ffff8000117db000 x18: 0000000000000000
     [    0.383219] x17: 0000000000000000 x16: 0000000000000000
     [    0.383220] x15: 0000000000000000 x14: 0000000000000000
     [    0.383221] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.383222] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.383222] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.383223] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.383224] x5 : 00000000a0a0a0a0 x4 : ffffa0260e212000
     [    0.383225] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.383226] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.383227] Call trace:
     [    0.383229]  its_cpu_init+0x2f0/0x494
     [    0.383230]  gic_starting_cpu+0x18/0x24
     [    0.383231]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.383233]  notify_cpu_starting+0x9c/0xb8
     [    0.383234]  secondary_start_kernel+0xdc/0x168
     [    0.383235] ---[ end trace f68728a0d3053b5b ]---
     [    0.383240] GICv3: CPU9: using allocated LPI pending table 
@0x000000007d290000
     [    0.383261] Xen: initializing cpu9
     [    0.383269] CPU9: Booted secondary processor 0x0000000009 
[0x481fd010]
     [    0.412634] Detected VIPT I-cache on CPU10
     [    0.412654] GICv3: CPU10: found redistributor a region 
5:0x00000000ae240000
     [    0.419339] ------------[ cut here ]------------
     [    0.419342] WARNING: CPU: 10 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.419343] Modules linked in:
     [    0.419345] CPU: 10 PID: 0 Comm: swapper/10 Tainted: G W         
5.5.0-rc5 #132
     [    0.419346] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.419348] pc : its_cpu_init+0x2f0/0x494
     [    0.419349] lr : its_cpu_init+0x2ec/0x494
     [    0.419350] sp : ffff800011f93ee0
     [    0.419350] x29: ffff800011f93ee0 x28: 0000000000000000
     [    0.419352] x27: 0000000000000000 x26: 0000000000000000
     [    0.419353] x25: 0000000000000000 x24: ffff800012040000
     [    0.419354] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.419355] x21: ffff8000117a9000 x20: fffffe0001d4a800
     [    0.419356] x19: ffff8000117db000 x18: 0000000000000000
     [    0.419357] x17: 0000000000000000 x16: 0000000000000000
     [    0.419358] x15: 0000000000000000 x14: 0000000000000000
     [    0.419359] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.419359] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.419360] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.419361] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.419362] x5 : 00000000a0a0a0a0 x4 : ffffa0260e228000
     [    0.419363] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.419364] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.419365] Call trace:
     [    0.419367]  its_cpu_init+0x2f0/0x494
     [    0.419368]  gic_starting_cpu+0x18/0x24
     [    0.419369]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.419370]  notify_cpu_starting+0x9c/0xb8
     [    0.419372]  secondary_start_kernel+0xdc/0x168
     [    0.419373] ---[ end trace f68728a0d3053b5c ]---
     [    0.419377] GICv3: CPU10: using allocated LPI pending table 
@0x000000007d2a0000
     [    0.419398] Xen: initializing cpu10
     [    0.419405] CPU10: Booted secondary processor 0x000000000a 
[0x481fd010]
     [    0.448685] Detected VIPT I-cache on CPU11
     [    0.448706] GICv3: CPU11: found redistributor b region 
5:0x00000000ae260000
     [    0.455392] ------------[ cut here ]------------
     [    0.455395] WARNING: CPU: 11 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.455395] Modules linked in:
     [    0.455398] CPU: 11 PID: 0 Comm: swapper/11 Tainted: G W         
5.5.0-rc5 #132
     [    0.455399] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.455400] pc : its_cpu_init+0x2f0/0x494
     [    0.455402] lr : its_cpu_init+0x2ec/0x494
     [    0.455403] sp : ffff800011f9bee0
     [    0.455404] x29: ffff800011f9bee0 x28: 0000000000000000
     [    0.455405] x27: 0000000000000000 x26: 0000000000000000
     [    0.455406] x25: 0000000000000000 x24: ffff800012060000
     [    0.455407] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.455408] x21: ffff8000117a9000 x20: fffffe0001d4ac00
     [    0.455409] x19: ffff8000117db000 x18: 0000000000000000
     [    0.455410] x17: 0000000000000000 x16: 0000000000000000
     [    0.455410] x15: 0000000000000000 x14: 0000000000000000
     [    0.455411] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.455412] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.455413] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.455414] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.455415] x5 : 00000000a0a0a0a0 x4 : ffffa0260e23e000
     [    0.455416] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.455417] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.455418] Call trace:
     [    0.455420]  its_cpu_init+0x2f0/0x494
     [    0.455421]  gic_starting_cpu+0x18/0x24
     [    0.455422]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.455423]  notify_cpu_starting+0x9c/0xb8
     [    0.455425]  secondary_start_kernel+0xdc/0x168
     [    0.455426] ---[ end trace f68728a0d3053b5d ]---
     [    0.455430] GICv3: CPU11: using allocated LPI pending table 
@0x000000007d2b0000
     [    0.455451] Xen: initializing cpu11
     [    0.455459] CPU11: Booted secondary processor 0x000000000b 
[0x481fd010]
     [    0.484752] Detected VIPT I-cache on CPU12
     [    0.484778] GICv3: CPU12: found redistributor c region 
6:0x00000000ae280000
     [    0.491470] ------------[ cut here ]------------
     [    0.491475] WARNING: CPU: 12 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.491475] Modules linked in:
     [    0.491478] CPU: 12 PID: 0 Comm: swapper/12 Tainted: G W         
5.5.0-rc5 #132
     [    0.491480] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.491482] pc : its_cpu_init+0x2f0/0x494
     [    0.491483] lr : its_cpu_init+0x2ec/0x494
     [    0.491484] sp : ffff800011fa3ee0
     [    0.491484] x29: ffff800011fa3ee0 x28: 0000000000000000
     [    0.491486] x27: 0000000000000000 x26: 0000000000000000
     [    0.491487] x25: 0000000000000000 x24: ffff8000120c0000
     [    0.491488] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.491489] x21: ffff8000117a9000 x20: fffffe0001d4b000
     [    0.491490] x19: ffff8000117db000 x18: 0000000000000000
     [    0.491491] x17: 0000000000000000 x16: 0000000000000000
     [    0.491492] x15: 0000000000000000 x14: 0000000000000000
     [    0.491493] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.491494] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.491495] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.491496] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.491497] x5 : 00000000a0a0a0a0 x4 : ffffa0260e254000
     [    0.491498] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.491499] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.491500] Call trace:
     [    0.491502]  its_cpu_init+0x2f0/0x494
     [    0.491503]  gic_starting_cpu+0x18/0x24
     [    0.491504]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.491506]  notify_cpu_starting+0x9c/0xb8
     [    0.491507]  secondary_start_kernel+0xdc/0x168
     [    0.491508] ---[ end trace f68728a0d3053b5e ]---
     [    0.491514] GICv3: CPU12: using allocated LPI pending table 
@0x000000007d2c0000
     [    0.491540] Xen: initializing cpu12
     [    0.491550] CPU12: Booted secondary processor 0x000000000c 
[0x481fd010]
     [    0.520790] Detected VIPT I-cache on CPU13
     [    0.520814] GICv3: CPU13: found redistributor d region 
6:0x00000000ae2a0000
     [    0.527499] ------------[ cut here ]------------
     [    0.527502] WARNING: CPU: 13 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.527503] Modules linked in:
     [    0.527505] CPU: 13 PID: 0 Comm: swapper/13 Tainted: G W         
5.5.0-rc5 #132
     [    0.527507] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.527508] pc : its_cpu_init+0x2f0/0x494
     [    0.527510] lr : its_cpu_init+0x2ec/0x494
     [    0.527510] sp : ffff800011fabee0
     [    0.527511] x29: ffff800011fabee0 x28: 0000000000000000
     [    0.527512] x27: 0000000000000000 x26: 0000000000000000
     [    0.527513] x25: 0000000000000000 x24: ffff8000120e0000
     [    0.527514] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.527515] x21: ffff8000117a9000 x20: fffffe0001d4b400
     [    0.527516] x19: ffff8000117db000 x18: 0000000000000000
     [    0.527517] x17: 0000000000000000 x16: 0000000000000000
     [    0.527518] x15: 0000000000000000 x14: 0000000000000000
     [    0.527519] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.527520] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.527521] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.527522] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.527523] x5 : 00000000a0a0a0a0 x4 : ffffa0260e26a000
     [    0.527524] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.527525] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.527526] Call trace:
     [    0.527527]  its_cpu_init+0x2f0/0x494
     [    0.527529]  gic_starting_cpu+0x18/0x24
     [    0.527530]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.527531]  notify_cpu_starting+0x9c/0xb8
     [    0.527532]  secondary_start_kernel+0xdc/0x168
     [    0.527533] ---[ end trace f68728a0d3053b5f ]---
     [    0.527539] GICv3: CPU13: using allocated LPI pending table 
@0x000000007d2d0000
     [    0.527560] Xen: initializing cpu13
     [    0.527568] CPU13: Booted secondary processor 0x000000000d 
[0x481fd010]
     [    0.556841] Detected VIPT I-cache on CPU14
     [    0.556865] GICv3: CPU14: found redistributor e region 
7:0x00000000ae2c0000
     [    0.563551] ------------[ cut here ]------------
     [    0.563555] WARNING: CPU: 14 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.563555] Modules linked in:
     [    0.563557] CPU: 14 PID: 0 Comm: swapper/14 Tainted: G W         
5.5.0-rc5 #132
     [    0.563559] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.563560] pc : its_cpu_init+0x2f0/0x494
     [    0.563562] lr : its_cpu_init+0x2ec/0x494
     [    0.563562] sp : ffff800011fb3ee0
     [    0.563563] x29: ffff800011fb3ee0 x28: 0000000000000000
     [    0.563564] x27: 0000000000000000 x26: 0000000000000000
     [    0.563565] x25: 0000000000000000 x24: ffff800012140000
     [    0.563567] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.563568] x21: ffff8000117a9000 x20: fffffe0001d4b800
     [    0.563569] x19: ffff8000117db000 x18: 0000000000000000
     [    0.563570] x17: 0000000000000000 x16: 0000000000000000
     [    0.563571] x15: 0000000000000000 x14: 0000000000000000
     [    0.563572] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.563573] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.563574] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.563575] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.563576] x5 : 00000000a0a0a0a0 x4 : ffffa0260e280000
     [    0.563577] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.563578] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.563579] Call trace:
     [    0.563581]  its_cpu_init+0x2f0/0x494
     [    0.563582]  gic_starting_cpu+0x18/0x24
     [    0.563583]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.563585]  notify_cpu_starting+0x9c/0xb8
     [    0.563586]  secondary_start_kernel+0xdc/0x168
     [    0.563587] ---[ end trace f68728a0d3053b60 ]---
     [    0.563592] GICv3: CPU14: using allocated LPI pending table 
@0x000000007d2e0000
     [    0.563613] Xen: initializing cpu14
     [    0.563621] CPU14: Booted secondary processor 0x000000000e 
[0x481fd010]
     [    0.592893] Detected VIPT I-cache on CPU15
     [    0.592918] GICv3: CPU15: found redistributor f region 
7:0x00000000ae2e0000
     [    0.599604] ------------[ cut here ]------------
     [    0.599607] WARNING: CPU: 15 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.599608] Modules linked in:
     [    0.599610] CPU: 15 PID: 0 Comm: swapper/15 Tainted: G W         
5.5.0-rc5 #132
     [    0.599611] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.599613] pc : its_cpu_init+0x2f0/0x494
     [    0.599614] lr : its_cpu_init+0x2ec/0x494
     [    0.599615] sp : ffff800011fbbee0
     [    0.599615] x29: ffff800011fbbee0 x28: 0000000000000000
     [    0.599616] x27: 0000000000000000 x26: 0000000000000000
     [    0.599617] x25: 0000000000000000 x24: ffff800012160000
     [    0.599618] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.599619] x21: ffff8000117a9000 x20: fffffe0001d4bc00
     [    0.599620] x19: ffff8000117db000 x18: 0000000000000000
     [    0.599621] x17: 0000000000000000 x16: 0000000000000000
     [    0.599622] x15: 0000000000000000 x14: 0000000000000000
     [    0.599623] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.599624] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.599625] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.599626] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.599627] x5 : 00000000a0a0a0a0 x4 : ffffa0260e296000
     [    0.599628] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.599629] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.599630] Call trace:
     [    0.599632]  its_cpu_init+0x2f0/0x494
     [    0.599633]  gic_starting_cpu+0x18/0x24
     [    0.599634]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.599635]  notify_cpu_starting+0x9c/0xb8
     [    0.599637]  secondary_start_kernel+0xdc/0x168
     [    0.599638] ---[ end trace f68728a0d3053b61 ]---
     [    0.599643] GICv3: CPU15: using allocated LPI pending table 
@0x000000007d2f0000
     [    0.599663] Xen: initializing cpu15
     [    0.599671] CPU15: Booted secondary processor 0x000000000f 
[0x481fd010]
     [    0.628958] Detected VIPT I-cache on CPU16
     [    0.628992] GICv3: CPU16: found redistributor 100 region 
8:0x00000000ae300000
     [    0.635685] ------------[ cut here ]------------
     [    0.635689] WARNING: CPU: 16 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.635690] Modules linked in:
     [    0.635693] CPU: 16 PID: 0 Comm: swapper/16 Tainted: G W         
5.5.0-rc5 #132
     [    0.635694] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.635696] pc : its_cpu_init+0x2f0/0x494
     [    0.635697] lr : its_cpu_init+0x2ec/0x494
     [    0.635698] sp : ffff80001200bee0
     [    0.635698] x29: ffff80001200bee0 x28: 0000000000000000
     [    0.635700] x27: 0000000000000000 x26: 0000000000000000
     [    0.635701] x25: 0000000000000000 x24: ffff8000121c0000
     [    0.635702] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.635703] x21: ffff8000117a9000 x20: fffffe0001d4c000
     [    0.635704] x19: ffff8000117db000 x18: 0000000000000000
     [    0.635705] x17: 0000000000000000 x16: 0000000000000000
     [    0.635706] x15: 0000000000000000 x14: 0000000000000000
     [    0.635707] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.635708] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.635709] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.635710] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.635711] x5 : 00000000a0a0a0a0 x4 : ffffa0260e2ac000
     [    0.635712] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.635713] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.635714] Call trace:
     [    0.635716]  its_cpu_init+0x2f0/0x494
     [    0.635717]  gic_starting_cpu+0x18/0x24
     [    0.635719]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.635720]  notify_cpu_starting+0x9c/0xb8
     [    0.635722]  secondary_start_kernel+0xdc/0x168
     [    0.635723] ---[ end trace f68728a0d3053b62 ]---
     [    0.635728] GICv3: CPU16: using allocated LPI pending table 
@0x000000007d300000
     [    0.635756] Xen: initializing cpu16
     [    0.635767] CPU16: Booted secondary processor 0x0000000100 
[0x481fd010]
     [    0.664997] Detected VIPT I-cache on CPU17
     [    0.665026] GICv3: CPU17: found redistributor 101 region 
8:0x00000000ae320000
     [    0.671711] ------------[ cut here ]------------
     [    0.671715] WARNING: CPU: 17 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.671715] Modules linked in:
     [    0.671717] CPU: 17 PID: 0 Comm: swapper/17 Tainted: G W         
5.5.0-rc5 #132
     [    0.671719] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.671720] pc : its_cpu_init+0x2f0/0x494
     [    0.671722] lr : its_cpu_init+0x2ec/0x494
     [    0.671722] sp : ffff800012013ee0
     [    0.671723] x29: ffff800012013ee0 x28: 0000000000000000
     [    0.671724] x27: 0000000000000000 x26: 0000000000000000
     [    0.671725] x25: 0000000000000000 x24: ffff8000121e0000
     [    0.671726] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.671727] x21: ffff8000117a9000 x20: fffffe0001d4c400
     [    0.671728] x19: ffff8000117db000 x18: 0000000000000000
     [    0.671729] x17: 0000000000000000 x16: 0000000000000000
     [    0.671730] x15: 0000000000000000 x14: 0000000000000000
     [    0.671731] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.671732] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.671733] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.671734] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.671735] x5 : 00000000a0a0a0a0 x4 : ffffa0260e2c2000
     [    0.671736] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.671737] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.671738] Call trace:
     [    0.671739]  its_cpu_init+0x2f0/0x494
     [    0.671741]  gic_starting_cpu+0x18/0x24
     [    0.671742]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.671743]  notify_cpu_starting+0x9c/0xb8
     [    0.671744]  secondary_start_kernel+0xdc/0x168
     [    0.671745] ---[ end trace f68728a0d3053b63 ]---
     [    0.671751] GICv3: CPU17: using allocated LPI pending table 
@0x000000007d310000
     [    0.671771] Xen: initializing cpu17
     [    0.671779] CPU17: Booted secondary processor 0x0000000101 
[0x481fd010]
     [    0.701048] Detected VIPT I-cache on CPU18
     [    0.701079] GICv3: CPU18: found redistributor 102 region 
9:0x00000000ae340000
     [    0.707765] ------------[ cut here ]------------
     [    0.707768] WARNING: CPU: 18 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.707769] Modules linked in:
     [    0.707771] CPU: 18 PID: 0 Comm: swapper/18 Tainted: G W         
5.5.0-rc5 #132
     [    0.707772] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.707774] pc : its_cpu_init+0x2f0/0x494
     [    0.707775] lr : its_cpu_init+0x2ec/0x494
     [    0.707776] sp : ffff80001201bee0
     [    0.707777] x29: ffff80001201bee0 x28: 0000000000000000
     [    0.707778] x27: 0000000000000000 x26: 0000000000000000
     [    0.707779] x25: 0000000000000000 x24: ffff800012240000
     [    0.707780] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.707781] x21: ffff8000117a9000 x20: fffffe0001d4c800
     [    0.707782] x19: ffff8000117db000 x18: 0000000000000000
     [    0.707783] x17: 0000000000000000 x16: 0000000000000000
     [    0.707784] x15: 0000000000000000 x14: 0000000000000000
     [    0.707785] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.707786] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.707787] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.707788] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.707789] x5 : 00000000a0a0a0a0 x4 : ffffa0260e2d8000
     [    0.707790] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.707791] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.707792] Call trace:
     [    0.707794]  its_cpu_init+0x2f0/0x494
     [    0.707795]  gic_starting_cpu+0x18/0x24
     [    0.707796]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.707797]  notify_cpu_starting+0x9c/0xb8
     [    0.707799]  secondary_start_kernel+0xdc/0x168
     [    0.707800] ---[ end trace f68728a0d3053b64 ]---
     [    0.707805] GICv3: CPU18: using allocated LPI pending table 
@0x000000007d320000
     [    0.707825] Xen: initializing cpu18
     [    0.707833] CPU18: Booted secondary processor 0x0000000102 
[0x481fd010]
     [    0.737100] Detected VIPT I-cache on CPU19
     [    0.737131] GICv3: CPU19: found redistributor 103 region 
9:0x00000000ae360000
     [    0.743817] ------------[ cut here ]------------
     [    0.743820] WARNING: CPU: 19 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.743821] Modules linked in:
     [    0.743823] CPU: 19 PID: 0 Comm: swapper/19 Tainted: G W         
5.5.0-rc5 #132
     [    0.743824] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.743826] pc : its_cpu_init+0x2f0/0x494
     [    0.743827] lr : its_cpu_init+0x2ec/0x494
     [    0.743828] sp : ffff800012023ee0
     [    0.743829] x29: ffff800012023ee0 x28: 0000000000000000
     [    0.743830] x27: 0000000000000000 x26: 0000000000000000
     [    0.743831] x25: 0000000000000000 x24: ffff800012260000
     [    0.743832] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.743833] x21: ffff8000117a9000 x20: fffffe0001d4cc00
     [    0.743834] x19: ffff8000117db000 x18: 0000000000000000
     [    0.743835] x17: 0000000000000000 x16: 0000000000000000
     [    0.743836] x15: 0000000000000000 x14: 0000000000000000
     [    0.743836] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.743837] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.743838] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.743839] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.743840] x5 : 00000000a0a0a0a0 x4 : ffffa0260e2ee000
     [    0.743841] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.743842] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.743843] Call trace:
     [    0.743845]  its_cpu_init+0x2f0/0x494
     [    0.743846]  gic_starting_cpu+0x18/0x24
     [    0.743847]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.743848]  notify_cpu_starting+0x9c/0xb8
     [    0.743850]  secondary_start_kernel+0xdc/0x168
     [    0.743851] ---[ end trace f68728a0d3053b65 ]---
     [    0.743856] GICv3: CPU19: using allocated LPI pending table 
@0x000000007d330000
     [    0.743876] Xen: initializing cpu19
     [    0.743884] CPU19: Booted secondary processor 0x0000000103 
[0x481fd010]
     [    0.773165] Detected VIPT I-cache on CPU20
     [    0.773203] GICv3: CPU20: found redistributor 104 region 
10:0x00000000ae380000
     [    0.779895] ------------[ cut here ]------------
     [    0.779900] WARNING: CPU: 20 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.779901] Modules linked in:
     [    0.779904] CPU: 20 PID: 0 Comm: swapper/20 Tainted: G W         
5.5.0-rc5 #132
     [    0.779906] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.779907] pc : its_cpu_init+0x2f0/0x494
     [    0.779909] lr : its_cpu_init+0x2ec/0x494
     [    0.779909] sp : ffff80001202bee0
     [    0.779910] x29: ffff80001202bee0 x28: 0000000000000000
     [    0.779911] x27: 0000000000000000 x26: 0000000000000000
     [    0.779913] x25: 0000000000000000 x24: ffff8000122c0000
     [    0.779914] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.779915] x21: ffff8000117a9000 x20: fffffe0001d4d000
     [    0.779916] x19: ffff8000117db000 x18: 0000000000000000
     [    0.779917] x17: 0000000000000000 x16: 0000000000000000
     [    0.779918] x15: 0000000000000000 x14: 0000000000000000
     [    0.779919] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.779920] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.779921] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.779922] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.779923] x5 : 00000000a0a0a0a0 x4 : ffffa0260e304000
     [    0.779924] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.779925] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.779926] Call trace:
     [    0.779928]  its_cpu_init+0x2f0/0x494
     [    0.779929]  gic_starting_cpu+0x18/0x24
     [    0.779931]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.779932]  notify_cpu_starting+0x9c/0xb8
     [    0.779934]  secondary_start_kernel+0xdc/0x168
     [    0.779935] ---[ end trace f68728a0d3053b66 ]---
     [    0.779940] GICv3: CPU20: using allocated LPI pending table 
@0x000000007d340000
     [    0.779968] Xen: initializing cpu20
     [    0.779979] CPU20: Booted secondary processor 0x0000000104 
[0x481fd010]
     [    0.809204] Detected VIPT I-cache on CPU21
     [    0.809238] GICv3: CPU21: found redistributor 105 region 
10:0x00000000ae3a0000
     [    0.815924] ------------[ cut here ]------------
     [    0.815928] WARNING: CPU: 21 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.815928] Modules linked in:
     [    0.815930] CPU: 21 PID: 0 Comm: swapper/21 Tainted: G W         
5.5.0-rc5 #132
     [    0.815932] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.815933] pc : its_cpu_init+0x2f0/0x494
     [    0.815935] lr : its_cpu_init+0x2ec/0x494
     [    0.815935] sp : ffff800012033ee0
     [    0.815936] x29: ffff800012033ee0 x28: 0000000000000000
     [    0.815937] x27: 0000000000000000 x26: 0000000000000000
     [    0.815938] x25: 0000000000000000 x24: ffff8000122e0000
     [    0.815939] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.815940] x21: ffff8000117a9000 x20: fffffe0001d4d400
     [    0.815941] x19: ffff8000117db000 x18: 0000000000000000
     [    0.815942] x17: 0000000000000000 x16: 0000000000000000
     [    0.815943] x15: 0000000000000000 x14: 0000000000000000
     [    0.815944] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.815945] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.815946] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.815947] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.815948] x5 : 00000000a0a0a0a0 x4 : ffffa0260e31a000
     [    0.815949] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.815950] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.815951] Call trace:
     [    0.815953]  its_cpu_init+0x2f0/0x494
     [    0.815954]  gic_starting_cpu+0x18/0x24
     [    0.815955]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.815956]  notify_cpu_starting+0x9c/0xb8
     [    0.815958]  secondary_start_kernel+0xdc/0x168
     [    0.815959] ---[ end trace f68728a0d3053b67 ]---
     [    0.815964] GICv3: CPU21: using allocated LPI pending table 
@0x000000007d350000
     [    0.815984] Xen: initializing cpu21
     [    0.815993] CPU21: Booted secondary processor 0x0000000105 
[0x481fd010]
     [    0.845256] Detected VIPT I-cache on CPU22
     [    0.845291] GICv3: CPU22: found redistributor 106 region 
11:0x00000000ae3c0000
     [    0.851979] ------------[ cut here ]------------
     [    0.851982] WARNING: CPU: 22 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.851983] Modules linked in:
     [    0.851985] CPU: 22 PID: 0 Comm: swapper/22 Tainted: G W         
5.5.0-rc5 #132
     [    0.851986] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.851988] pc : its_cpu_init+0x2f0/0x494
     [    0.851989] lr : its_cpu_init+0x2ec/0x494
     [    0.851990] sp : ffff80001208bee0
     [    0.851990] x29: ffff80001208bee0 x28: 0000000000000000
     [    0.851992] x27: 0000000000000000 x26: 0000000000000000
     [    0.851993] x25: 0000000000000000 x24: ffff800012340000
     [    0.851994] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.851995] x21: ffff8000117a9000 x20: fffffe0001d4d800
     [    0.851996] x19: ffff8000117db000 x18: 0000000000000000
     [    0.851997] x17: 0000000000000000 x16: 0000000000000000
     [    0.851998] x15: 0000000000000000 x14: 0000000000000000
     [    0.851999] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.852000] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.852001] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.852002] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.852003] x5 : 00000000a0a0a0a0 x4 : ffffa0260e330000
     [    0.852004] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.852005] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.852006] Call trace:
     [    0.852008]  its_cpu_init+0x2f0/0x494
     [    0.852009]  gic_starting_cpu+0x18/0x24
     [    0.852010]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.852012]  notify_cpu_starting+0x9c/0xb8
     [    0.852013]  secondary_start_kernel+0xdc/0x168
     [    0.852014] ---[ end trace f68728a0d3053b68 ]---
     [    0.852019] GICv3: CPU22: using allocated LPI pending table 
@0x000000007d360000
     [    0.852040] Xen: initializing cpu22
     [    0.852048] CPU22: Booted secondary processor 0x0000000106 
[0x481fd010]
     [    0.881310] Detected VIPT I-cache on CPU23
     [    0.881348] GICv3: CPU23: found redistributor 107 region 
11:0x00000000ae3e0000
     [    0.888033] ------------[ cut here ]------------
     [    0.888037] WARNING: CPU: 23 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.888037] Modules linked in:
     [    0.888039] CPU: 23 PID: 0 Comm: swapper/23 Tainted: G W         
5.5.0-rc5 #132
     [    0.888041] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.888042] pc : its_cpu_init+0x2f0/0x494
     [    0.888044] lr : its_cpu_init+0x2ec/0x494
     [    0.888044] sp : ffff800012093ee0
     [    0.888045] x29: ffff800012093ee0 x28: 0000000000000000
     [    0.888046] x27: 0000000000000000 x26: 0000000000000000
     [    0.888047] x25: 0000000000000000 x24: ffff800012360000
     [    0.888048] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.888049] x21: ffff8000117a9000 x20: fffffe0001d4dc00
     [    0.888050] x19: ffff8000117db000 x18: 0000000000000000
     [    0.888051] x17: 0000000000000000 x16: 0000000000000000
     [    0.888052] x15: 0000000000000000 x14: 0000000000000000
     [    0.888053] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.888054] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.888055] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.888056] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.888057] x5 : 00000000a0a0a0a0 x4 : ffffa0260e346000
     [    0.888058] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.888059] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.888060] Call trace:
     [    0.888061]  its_cpu_init+0x2f0/0x494
     [    0.888062]  gic_starting_cpu+0x18/0x24
     [    0.888064]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.888065]  notify_cpu_starting+0x9c/0xb8
     [    0.888066]  secondary_start_kernel+0xdc/0x168
     [    0.888067] ---[ end trace f68728a0d3053b69 ]---
     [    0.888072] GICv3: CPU23: using allocated LPI pending table 
@0x000000007d370000
     [    0.888093] Xen: initializing cpu23
     [    0.888102] CPU23: Booted secondary processor 0x0000000107 
[0x481fd010]
     [    0.917374] Detected VIPT I-cache on CPU24
     [    0.917416] GICv3: CPU24: found redistributor 108 region 
12:0x00000000ae400000
     [    0.924109] ------------[ cut here ]------------
     [    0.924114] WARNING: CPU: 24 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.924115] Modules linked in:
     [    0.924118] CPU: 24 PID: 0 Comm: swapper/24 Tainted: G W         
5.5.0-rc5 #132
     [    0.924119] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.924121] pc : its_cpu_init+0x2f0/0x494
     [    0.924122] lr : its_cpu_init+0x2ec/0x494
     [    0.924123] sp : ffff80001209bee0
     [    0.924124] x29: ffff80001209bee0 x28: 0000000000000000
     [    0.924125] x27: 0000000000000000 x26: 0000000000000000
     [    0.924126] x25: 0000000000000000 x24: ffff8000123c0000
     [    0.924127] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.924128] x21: ffff8000117a9000 x20: fffffe0001d4e000
     [    0.924129] x19: ffff8000117db000 x18: 0000000000000000
     [    0.924131] x17: 0000000000000000 x16: 0000000000000000
     [    0.924132] x15: 0000000000000000 x14: 0000000000000000
     [    0.924133] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.924134] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.924135] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.924136] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.924137] x5 : 00000000a0a0a0a0 x4 : ffffa0260e35c000
     [    0.924137] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.924138] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.924140] Call trace:
     [    0.924142]  its_cpu_init+0x2f0/0x494
     [    0.924143]  gic_starting_cpu+0x18/0x24
     [    0.924145]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.924146]  notify_cpu_starting+0x9c/0xb8
     [    0.924147]  secondary_start_kernel+0xdc/0x168
     [    0.924148] ---[ end trace f68728a0d3053b6a ]---
     [    0.924154] GICv3: CPU24: using allocated LPI pending table 
@0x000000007d380000
     [    0.924181] Xen: initializing cpu24
     [    0.924193] CPU24: Booted secondary processor 0x0000000108 
[0x481fd010]
     [    0.953414] Detected VIPT I-cache on CPU25
     [    0.953454] GICv3: CPU25: found redistributor 109 region 
12:0x00000000ae420000
     [    0.960140] ------------[ cut here ]------------
     [    0.960144] WARNING: CPU: 25 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.960144] Modules linked in:
     [    0.960147] CPU: 25 PID: 0 Comm: swapper/25 Tainted: G W         
5.5.0-rc5 #132
     [    0.960148] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.960150] pc : its_cpu_init+0x2f0/0x494
     [    0.960151] lr : its_cpu_init+0x2ec/0x494
     [    0.960152] sp : ffff8000120a3ee0
     [    0.960152] x29: ffff8000120a3ee0 x28: 0000000000000000
     [    0.960154] x27: 0000000000000000 x26: 0000000000000000
     [    0.960155] x25: 0000000000000000 x24: ffff8000123e0000
     [    0.960156] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.960157] x21: ffff8000117a9000 x20: fffffe0001d4e400
     [    0.960158] x19: ffff8000117db000 x18: 0000000000000000
     [    0.960159] x17: 0000000000000000 x16: 0000000000000000
     [    0.960160] x15: 0000000000000000 x14: 0000000000000000
     [    0.960161] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.960162] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.960163] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.960164] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.960165] x5 : 00000000a0a0a0a0 x4 : ffffa0260e372000
     [    0.960166] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.960167] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.960168] Call trace:
     [    0.960170]  its_cpu_init+0x2f0/0x494
     [    0.960171]  gic_starting_cpu+0x18/0x24
     [    0.960172]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.960174]  notify_cpu_starting+0x9c/0xb8
     [    0.960175]  secondary_start_kernel+0xdc/0x168
     [    0.960176] ---[ end trace f68728a0d3053b6b ]---
     [    0.960181] GICv3: CPU25: using allocated LPI pending table 
@0x000000007d390000
     [    0.960202] Xen: initializing cpu25
     [    0.960211] CPU25: Booted secondary processor 0x0000000109 
[0x481fd010]
     [    0.989465] Detected VIPT I-cache on CPU26
     [    0.989505] GICv3: CPU26: found redistributor 10a region 
13:0x00000000ae440000
     [    0.996192] ------------[ cut here ]------------
     [    0.996195] WARNING: CPU: 26 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    0.996195] Modules linked in:
     [    0.996197] CPU: 26 PID: 0 Comm: swapper/26 Tainted: G W         
5.5.0-rc5 #132
     [    0.996199] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    0.996200] pc : its_cpu_init+0x2f0/0x494
     [    0.996202] lr : its_cpu_init+0x2ec/0x494
     [    0.996202] sp : ffff8000120abee0
     [    0.996203] x29: ffff8000120abee0 x28: 0000000000000000
     [    0.996204] x27: 0000000000000000 x26: 0000000000000000
     [    0.996205] x25: 0000000000000000 x24: ffff800012440000
     [    0.996206] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    0.996207] x21: ffff8000117a9000 x20: fffffe0001d4e800
     [    0.996208] x19: ffff8000117db000 x18: 0000000000000000
     [    0.996209] x17: 0000000000000000 x16: 0000000000000000
     [    0.996210] x15: 0000000000000000 x14: 0000000000000000
     [    0.996211] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    0.996212] x11: ffffffffffffffff x10: ffff8000119916a0
     [    0.996213] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    0.996214] x7 : 0000000000000000 x6 : 0000000000000070
     [    0.996215] x5 : 00000000a0a0a0a0 x4 : ffffa0260e388000
     [    0.996216] x3 : 000000000000003d x2 : ffffffffffffffff
     [    0.996217] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    0.996218] Call trace:
     [    0.996219]  its_cpu_init+0x2f0/0x494
     [    0.996221]  gic_starting_cpu+0x18/0x24
     [    0.996222]  cpuhp_invoke_callback+0x84/0x1e0
     [    0.996223]  notify_cpu_starting+0x9c/0xb8
     [    0.996224]  secondary_start_kernel+0xdc/0x168
     [    0.996225] ---[ end trace f68728a0d3053b6c ]---
     [    0.996231] GICv3: CPU26: using allocated LPI pending table 
@0x000000007d3a0000
     [    0.996253] Xen: initializing cpu26
     [    0.996262] CPU26: Booted secondary processor 0x000000010a 
[0x481fd010]
     [    1.025517] Detected VIPT I-cache on CPU27
     [    1.025559] GICv3: CPU27: found redistributor 10b region 
13:0x00000000ae460000
     [    1.032245] ------------[ cut here ]------------
     [    1.032249] WARNING: CPU: 27 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.032249] Modules linked in:
     [    1.032252] CPU: 27 PID: 0 Comm: swapper/27 Tainted: G W         
5.5.0-rc5 #132
     [    1.032253] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.032255] pc : its_cpu_init+0x2f0/0x494
     [    1.032256] lr : its_cpu_init+0x2ec/0x494
     [    1.032257] sp : ffff8000120b3ee0
     [    1.032257] x29: ffff8000120b3ee0 x28: 0000000000000000
     [    1.032258] x27: 0000000000000000 x26: 0000000000000000
     [    1.032259] x25: 0000000000000000 x24: ffff800012460000
     [    1.032260] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.032261] x21: ffff8000117a9000 x20: fffffe0001d4ec00
     [    1.032262] x19: ffff8000117db000 x18: 0000000000000000
     [    1.032263] x17: 0000000000000000 x16: 0000000000000000
     [    1.032264] x15: 0000000000000000 x14: 0000000000000000
     [    1.032265] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.032266] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.032267] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.032268] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.032269] x5 : 00000000a0a0a0a0 x4 : ffffa0260e39e000
     [    1.032270] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.032271] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.032272] Call trace:
     [    1.032273]  its_cpu_init+0x2f0/0x494
     [    1.032275]  gic_starting_cpu+0x18/0x24
     [    1.032276]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.032277]  notify_cpu_starting+0x9c/0xb8
     [    1.032279]  secondary_start_kernel+0xdc/0x168
     [    1.032279] ---[ end trace f68728a0d3053b6d ]---
     [    1.032285] GICv3: CPU27: using allocated LPI pending table 
@0x000000007d3b0000
     [    1.032306] Xen: initializing cpu27
     [    1.032315] CPU27: Booted secondary processor 0x000000010b 
[0x481fd010]
     [    1.061585] Detected VIPT I-cache on CPU28
     [    1.061632] GICv3: CPU28: found redistributor 10c region 
14:0x00000000ae480000
     [    1.068325] ------------[ cut here ]------------
     [    1.068330] WARNING: CPU: 28 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.068331] Modules linked in:
     [    1.068334] CPU: 28 PID: 0 Comm: swapper/28 Tainted: G W         
5.5.0-rc5 #132
     [    1.068335] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.068337] pc : its_cpu_init+0x2f0/0x494
     [    1.068338] lr : its_cpu_init+0x2ec/0x494
     [    1.068339] sp : ffff8000120bbee0
     [    1.068340] x29: ffff8000120bbee0 x28: 0000000000000000
     [    1.068341] x27: 0000000000000000 x26: 0000000000000000
     [    1.068342] x25: 0000000000000000 x24: ffff8000124c0000
     [    1.068343] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.068344] x21: ffff8000117a9000 x20: fffffe0001d4f000
     [    1.068345] x19: ffff8000117db000 x18: 0000000000000000
     [    1.068346] x17: 0000000000000000 x16: 0000000000000000
     [    1.068347] x15: 0000000000000000 x14: 0000000000000000
     [    1.068348] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.068349] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.068350] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.068351] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.068352] x5 : 00000000a0a0a0a0 x4 : ffffa0260e3b4000
     [    1.068353] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.068354] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.068355] Call trace:
     [    1.068357]  its_cpu_init+0x2f0/0x494
     [    1.068358]  gic_starting_cpu+0x18/0x24
     [    1.068360]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.068361]  notify_cpu_starting+0x9c/0xb8
     [    1.068363]  secondary_start_kernel+0xdc/0x168
     [    1.068364] ---[ end trace f68728a0d3053b6e ]---
     [    1.068369] GICv3: CPU28: using allocated LPI pending table 
@0x000000007d3c0000
     [    1.068399] Xen: initializing cpu28
     [    1.068413] CPU28: Booted secondary processor 0x000000010c 
[0x481fd010]
     [    1.097623] Detected VIPT I-cache on CPU29
     [    1.097667] GICv3: CPU29: found redistributor 10d region 
14:0x00000000ae4a0000
     [    1.104354] ------------[ cut here ]------------
     [    1.104357] WARNING: CPU: 29 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.104357] Modules linked in:
     [    1.104360] CPU: 29 PID: 0 Comm: swapper/29 Tainted: G W         
5.5.0-rc5 #132
     [    1.104362] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.104363] pc : its_cpu_init+0x2f0/0x494
     [    1.104365] lr : its_cpu_init+0x2ec/0x494
     [    1.104365] sp : ffff80001210bee0
     [    1.104366] x29: ffff80001210bee0 x28: 0000000000000000
     [    1.104367] x27: 0000000000000000 x26: 0000000000000000
     [    1.104368] x25: 0000000000000000 x24: ffff8000124e0000
     [    1.104369] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.104370] x21: ffff8000117a9000 x20: fffffe0001d4f400
     [    1.104371] x19: ffff8000117db000 x18: 0000000000000000
     [    1.104372] x17: 0000000000000000 x16: 0000000000000000
     [    1.104373] x15: 0000000000000000 x14: 0000000000000000
     [    1.104374] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.104375] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.104376] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.104377] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.104378] x5 : 00000000a0a0a0a0 x4 : ffffa0260e3ca000
     [    1.104378] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.104379] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.104381] Call trace:
     [    1.104382]  its_cpu_init+0x2f0/0x494
     [    1.104383]  gic_starting_cpu+0x18/0x24
     [    1.104385]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.104386]  notify_cpu_starting+0x9c/0xb8
     [    1.104387]  secondary_start_kernel+0xdc/0x168
     [    1.104388] ---[ end trace f68728a0d3053b6f ]---
     [    1.104393] GICv3: CPU29: using allocated LPI pending table 
@0x000000007d3d0000
     [    1.104415] Xen: initializing cpu29
     [    1.104424] CPU29: Booted secondary processor 0x000000010d 
[0x481fd010]
     [    1.133676] Detected VIPT I-cache on CPU30
     [    1.133721] GICv3: CPU30: found redistributor 10e region 
15:0x00000000ae4c0000
     [    1.140407] ------------[ cut here ]------------
     [    1.140411] WARNING: CPU: 30 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.140411] Modules linked in:
     [    1.140413] CPU: 30 PID: 0 Comm: swapper/30 Tainted: G W         
5.5.0-rc5 #132
     [    1.140415] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.140416] pc : its_cpu_init+0x2f0/0x494
     [    1.140418] lr : its_cpu_init+0x2ec/0x494
     [    1.140418] sp : ffff800012113ee0
     [    1.140419] x29: ffff800012113ee0 x28: 0000000000000000
     [    1.140420] x27: 0000000000000000 x26: 0000000000000000
     [    1.140421] x25: 0000000000000000 x24: ffff800012540000
     [    1.140422] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.140424] x21: ffff8000117a9000 x20: fffffe0001d4f800
     [    1.140425] x19: ffff8000117db000 x18: 0000000000000000
     [    1.140426] x17: 0000000000000000 x16: 0000000000000000
     [    1.140427] x15: 0000000000000000 x14: 0000000000000000
     [    1.140428] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.140429] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.140430] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.140431] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.140432] x5 : 00000000a0a0a0a0 x4 : ffffa0260e3e0000
     [    1.140433] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.140434] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.140435] Call trace:
     [    1.140436]  its_cpu_init+0x2f0/0x494
     [    1.140437]  gic_starting_cpu+0x18/0x24
     [    1.140439]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.140440]  notify_cpu_starting+0x9c/0xb8
     [    1.140442]  secondary_start_kernel+0xdc/0x168
     [    1.140442] ---[ end trace f68728a0d3053b70 ]---
     [    1.140447] GICv3: CPU30: using allocated LPI pending table 
@0x000000007d3e0000
     [    1.140468] Xen: initializing cpu30
     [    1.140477] CPU30: Booted secondary processor 0x000000010e 
[0x481fd010]
     [    1.169742] Detected VIPT I-cache on CPU31
     [    1.169788] GICv3: CPU31: found redistributor 10f region 
15:0x00000000ae4e0000
     [    1.176474] ------------[ cut here ]------------
     [    1.176477] WARNING: CPU: 31 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.176477] Modules linked in:
     [    1.176480] CPU: 31 PID: 0 Comm: swapper/31 Tainted: G W         
5.5.0-rc5 #132
     [    1.176481] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.176483] pc : its_cpu_init+0x2f0/0x494
     [    1.176484] lr : its_cpu_init+0x2ec/0x494
     [    1.176485] sp : ffff80001211bee0
     [    1.176485] x29: ffff80001211bee0 x28: 0000000000000000
     [    1.176486] x27: 0000000000000000 x26: 0000000000000000
     [    1.176487] x25: 0000000000000000 x24: ffff800012560000
     [    1.176488] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.176489] x21: ffff8000117a9000 x20: fffffe0001d4fc00
     [    1.176491] x19: ffff8000117db000 x18: 0000000000000000
     [    1.176492] x17: 0000000000000000 x16: 0000000000000000
     [    1.176493] x15: 0000000000000000 x14: 0000000000000000
     [    1.176494] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.176495] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.176496] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.176497] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.176498] x5 : 00000000a0a0a0a0 x4 : ffffa0260e3f6000
     [    1.176499] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.176500] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.176501] Call trace:
     [    1.176503]  its_cpu_init+0x2f0/0x494
     [    1.176504]  gic_starting_cpu+0x18/0x24
     [    1.176505]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.176506]  notify_cpu_starting+0x9c/0xb8
     [    1.176508]  secondary_start_kernel+0xdc/0x168
     [    1.176508] ---[ end trace f68728a0d3053b71 ]---
     [    1.176514] GICv3: CPU31: using allocated LPI pending table 
@0x000000007d3f0000
     [    1.176537] Xen: initializing cpu31
     [    1.176545] CPU31: Booted secondary processor 0x000000010f 
[0x481fd010]
     [    1.205818] Detected VIPT I-cache on CPU32
     [    1.205890] GICv3: CPU32: found redistributor 200 region 
16:0x00000000ae500000
     [    1.212597] ------------[ cut here ]------------
     [    1.212603] WARNING: CPU: 32 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.212604] Modules linked in:
     [    1.212608] CPU: 32 PID: 0 Comm: swapper/32 Tainted: G W         
5.5.0-rc5 #132
     [    1.212610] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.212611] pc : its_cpu_init+0x2f0/0x494
     [    1.212613] lr : its_cpu_init+0x2ec/0x494
     [    1.212614] sp : ffff800012123ee0
     [    1.212614] x29: ffff800012123ee0 x28: 0000000000000000
     [    1.212616] x27: 0000000000000000 x26: 0000000000000000
     [    1.212617] x25: 0000000000000000 x24: ffff8000125c0000
     [    1.212618] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.212619] x21: ffff8000117a9000 x20: fffffe0001cb0000
     [    1.212620] x19: ffff8000117db000 x18: 0000000000000000
     [    1.212621] x17: 0000000000000000 x16: 0000000000000000
     [    1.212622] x15: 0000000000000000 x14: 0000000000000000
     [    1.212623] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.212624] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.212625] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.212626] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.212627] x5 : 00000000a0a0a0a0 x4 : ffff80006c961000
     [    1.212628] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.212628] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.212630] Call trace:
     [    1.212632]  its_cpu_init+0x2f0/0x494
     [    1.212633]  gic_starting_cpu+0x18/0x24
     [    1.212635]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.212636]  notify_cpu_starting+0x9c/0xb8
     [    1.212638]  secondary_start_kernel+0xdc/0x168
     [    1.212639] ---[ end trace f68728a0d3053b72 ]---
     [    1.212646] GICv3: CPU32: using allocated LPI pending table 
@0x000000007ac00000
     [    1.212690] Xen: initializing cpu32
     [    1.212704] CPU32: Booted secondary processor 0x0000000200 
[0x481fd010]
     [    1.241875] Detected VIPT I-cache on CPU33
     [    1.241933] GICv3: CPU33: found redistributor 201 region 
16:0x00000000ae520000
     [    1.248623] ------------[ cut here ]------------
     [    1.248626] WARNING: CPU: 33 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.248627] Modules linked in:
     [    1.248629] CPU: 33 PID: 0 Comm: swapper/33 Tainted: G W         
5.5.0-rc5 #132
     [    1.248630] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.248632] pc : its_cpu_init+0x2f0/0x494
     [    1.248633] lr : its_cpu_init+0x2ec/0x494
     [    1.248634] sp : ffff80001212bee0
     [    1.248635] x29: ffff80001212bee0 x28: 0000000000000000
     [    1.248636] x27: 0000000000000000 x26: 0000000000000000
     [    1.248637] x25: 0000000000000000 x24: ffff8000125e0000
     [    1.248638] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.248639] x21: ffff8000117a9000 x20: fffffe0001cb0400
     [    1.248640] x19: ffff8000117db000 x18: 0000000000000000
     [    1.248641] x17: 0000000000000000 x16: 0000000000000000
     [    1.248642] x15: 0000000000000000 x14: 0000000000000000
     [    1.248642] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.248643] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.248644] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.248645] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.248646] x5 : 00000000a0a0a0a0 x4 : ffff80006c977000
     [    1.248647] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.248648] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.248649] Call trace:
     [    1.248651]  its_cpu_init+0x2f0/0x494
     [    1.248652]  gic_starting_cpu+0x18/0x24
     [    1.248653]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.248655]  notify_cpu_starting+0x9c/0xb8
     [    1.248656]  secondary_start_kernel+0xdc/0x168
     [    1.248657] ---[ end trace f68728a0d3053b73 ]---
     [    1.248664] GICv3: CPU33: using allocated LPI pending table 
@0x000000007ac10000
     [    1.248689] Xen: initializing cpu33
     [    1.248698] CPU33: Booted secondary processor 0x0000000201 
[0x481fd010]
     [    1.277949] Detected VIPT I-cache on CPU34
     [    1.278007] GICv3: CPU34: found redistributor 202 region 
17:0x00000000ae540000
     [    1.284698] ------------[ cut here ]------------
     [    1.284701] WARNING: CPU: 34 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.284701] Modules linked in:
     [    1.284704] CPU: 34 PID: 0 Comm: swapper/34 Tainted: G W         
5.5.0-rc5 #132
     [    1.284705] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.284707] pc : its_cpu_init+0x2f0/0x494
     [    1.284708] lr : its_cpu_init+0x2ec/0x494
     [    1.284709] sp : ffff800012133ee0
     [    1.284709] x29: ffff800012133ee0 x28: 0000000000000000
     [    1.284711] x27: 0000000000000000 x26: 0000000000000000
     [    1.284712] x25: 0000000000000000 x24: ffff800012640000
     [    1.284713] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.284714] x21: ffff8000117a9000 x20: fffffe0001cb0800
     [    1.284715] x19: ffff8000117db000 x18: 0000000000000000
     [    1.284716] x17: 0000000000000000 x16: 0000000000000000
     [    1.284717] x15: 0000000000000000 x14: 0000000000000000
     [    1.284718] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.284719] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.284720] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.284721] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.284722] x5 : 00000000a0a0a0a0 x4 : ffff80006c98d000
     [    1.284723] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.284724] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.284725] Call trace:
     [    1.284726]  its_cpu_init+0x2f0/0x494
     [    1.284728]  gic_starting_cpu+0x18/0x24
     [    1.284729]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.284730]  notify_cpu_starting+0x9c/0xb8
     [    1.284732]  secondary_start_kernel+0xdc/0x168
     [    1.284732] ---[ end trace f68728a0d3053b74 ]---
     [    1.284738] GICv3: CPU34: using allocated LPI pending table 
@0x000000007ac20000
     [    1.284760] Xen: initializing cpu34
     [    1.284769] CPU34: Booted secondary processor 0x0000000202 
[0x481fd010]
     [    1.314023] Detected VIPT I-cache on CPU35
     [    1.314083] GICv3: CPU35: found redistributor 203 region 
17:0x00000000ae560000
     [    1.320775] ------------[ cut here ]------------
     [    1.320779] WARNING: CPU: 35 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.320779] Modules linked in:
     [    1.320782] CPU: 35 PID: 0 Comm: swapper/35 Tainted: G W         
5.5.0-rc5 #132
     [    1.320783] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.320785] pc : its_cpu_init+0x2f0/0x494
     [    1.320786] lr : its_cpu_init+0x2ec/0x494
     [    1.320786] sp : ffff80001218bee0
     [    1.320787] x29: ffff80001218bee0 x28: 0000000000000000
     [    1.320788] x27: 0000000000000000 x26: 0000000000000000
     [    1.320789] x25: 0000000000000000 x24: ffff800012660000
     [    1.320790] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.320791] x21: ffff8000117a9000 x20: fffffe0001cb0c00
     [    1.320792] x19: ffff8000117db000 x18: 0000000000000000
     [    1.320793] x17: 0000000000000000 x16: 0000000000000000
     [    1.320794] x15: 0000000000000000 x14: 0000000000000000
     [    1.320795] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.320796] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.320797] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.320798] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.320799] x5 : 00000000a0a0a0a0 x4 : ffff80006c9a3000
     [    1.320800] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.320801] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.320802] Call trace:
     [    1.320803]  its_cpu_init+0x2f0/0x494
     [    1.320805]  gic_starting_cpu+0x18/0x24
     [    1.320806]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.320807]  notify_cpu_starting+0x9c/0xb8
     [    1.320809]  secondary_start_kernel+0xdc/0x168
     [    1.320809] ---[ end trace f68728a0d3053b75 ]---
     [    1.320815] GICv3: CPU35: using allocated LPI pending table 
@0x000000007ac30000
     [    1.320835] Xen: initializing cpu35
     [    1.320844] CPU35: Booted secondary processor 0x0000000203 
[0x481fd010]
     [    1.350102] Detected VIPT I-cache on CPU36
     [    1.350173] GICv3: CPU36: found redistributor 204 region 
18:0x00000000ae580000
     [    1.356868] ------------[ cut here ]------------
     [    1.356872] WARNING: CPU: 36 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.356873] Modules linked in:
     [    1.356876] CPU: 36 PID: 0 Comm: swapper/36 Tainted: G W         
5.5.0-rc5 #132
     [    1.356877] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.356879] pc : its_cpu_init+0x2f0/0x494
     [    1.356880] lr : its_cpu_init+0x2ec/0x494
     [    1.356881] sp : ffff800012193ee0
     [    1.356881] x29: ffff800012193ee0 x28: 0000000000000000
     [    1.356883] x27: 0000000000000000 x26: 0000000000000000
     [    1.356884] x25: 0000000000000000 x24: ffff8000126c0000
     [    1.356885] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.356886] x21: ffff8000117a9000 x20: fffffe0001cb1000
     [    1.356887] x19: ffff8000117db000 x18: 0000000000000000
     [    1.356888] x17: 0000000000000000 x16: 0000000000000000
     [    1.356889] x15: 0000000000000000 x14: 0000000000000000
     [    1.356890] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.356891] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.356892] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.356893] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.356894] x5 : 00000000a0a0a0a0 x4 : ffff80006c9b9000
     [    1.356895] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.356896] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.356897] Call trace:
     [    1.356899]  its_cpu_init+0x2f0/0x494
     [    1.356900]  gic_starting_cpu+0x18/0x24
     [    1.356902]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.356903]  notify_cpu_starting+0x9c/0xb8
     [    1.356905]  secondary_start_kernel+0xdc/0x168
     [    1.356905] ---[ end trace f68728a0d3053b76 ]---
     [    1.356912] GICv3: CPU36: using allocated LPI pending table 
@0x000000007ac40000
     [    1.356939] Xen: initializing cpu36
     [    1.356951] CPU36: Booted secondary processor 0x0000000204 
[0x481fd010]
     [    1.386170] Detected VIPT I-cache on CPU37
     [    1.386234] GICv3: CPU37: found redistributor 205 region 
18:0x00000000ae5a0000
     [    1.392924] ------------[ cut here ]------------
     [    1.392928] WARNING: CPU: 37 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.392928] Modules linked in:
     [    1.392930] CPU: 37 PID: 0 Comm: swapper/37 Tainted: G W         
5.5.0-rc5 #132
     [    1.392932] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.392933] pc : its_cpu_init+0x2f0/0x494
     [    1.392935] lr : its_cpu_init+0x2ec/0x494
     [    1.392935] sp : ffff80001219bee0
     [    1.392936] x29: ffff80001219bee0 x28: 0000000000000000
     [    1.392937] x27: 0000000000000000 x26: 0000000000000000
     [    1.392938] x25: 0000000000000000 x24: ffff8000126e0000
     [    1.392939] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.392940] x21: ffff8000117a9000 x20: fffffe0001cb1400
     [    1.392941] x19: ffff8000117db000 x18: 0000000000000000
     [    1.392942] x17: 0000000000000000 x16: 0000000000000000
     [    1.392943] x15: 0000000000000000 x14: 0000000000000000
     [    1.392944] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.392945] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.392946] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.392947] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.392947] x5 : 00000000a0a0a0a0 x4 : ffff80006c9cf000
     [    1.392948] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.392949] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.392950] Call trace:
     [    1.392952]  its_cpu_init+0x2f0/0x494
     [    1.392953]  gic_starting_cpu+0x18/0x24
     [    1.392955]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.392956]  notify_cpu_starting+0x9c/0xb8
     [    1.392957]  secondary_start_kernel+0xdc/0x168
     [    1.392958] ---[ end trace f68728a0d3053b77 ]---
     [    1.392963] GICv3: CPU37: using allocated LPI pending table 
@0x000000007ac50000
     [    1.392985] Xen: initializing cpu37
     [    1.392994] CPU37: Booted secondary processor 0x0000000205 
[0x481fd010]
     [    1.422247] Detected VIPT I-cache on CPU38
     [    1.422314] GICv3: CPU38: found redistributor 206 region 
19:0x00000000ae5c0000
     [    1.429005] ------------[ cut here ]------------
     [    1.429009] WARNING: CPU: 38 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.429009] Modules linked in:
     [    1.429011] CPU: 38 PID: 0 Comm: swapper/38 Tainted: G W         
5.5.0-rc5 #132
     [    1.429013] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.429015] pc : its_cpu_init+0x2f0/0x494
     [    1.429016] lr : its_cpu_init+0x2ec/0x494
     [    1.429017] sp : ffff8000121a3ee0
     [    1.429017] x29: ffff8000121a3ee0 x28: 0000000000000000
     [    1.429018] x27: 0000000000000000 x26: 0000000000000000
     [    1.429020] x25: 0000000000000000 x24: ffff800012740000
     [    1.429021] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.429021] x21: ffff8000117a9000 x20: fffffe0001cb1800
     [    1.429022] x19: ffff8000117db000 x18: 0000000000000000
     [    1.429023] x17: 0000000000000000 x16: 0000000000000000
     [    1.429024] x15: 0000000000000000 x14: 0000000000000000
     [    1.429025] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.429026] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.429027] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.429028] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.429029] x5 : 00000000a0a0a0a0 x4 : ffff80006c9e5000
     [    1.429030] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.429031] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.429032] Call trace:
     [    1.429033]  its_cpu_init+0x2f0/0x494
     [    1.429035]  gic_starting_cpu+0x18/0x24
     [    1.429036]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.429037]  notify_cpu_starting+0x9c/0xb8
     [    1.429038]  secondary_start_kernel+0xdc/0x168
     [    1.429039] ---[ end trace f68728a0d3053b78 ]---
     [    1.429045] GICv3: CPU38: using allocated LPI pending table 
@0x000000007ac60000
     [    1.429066] Xen: initializing cpu38
     [    1.429075] CPU38: Booted secondary processor 0x0000000206 
[0x481fd010]
     [    1.458321] Detected VIPT I-cache on CPU39
     [    1.458387] GICv3: CPU39: found redistributor 207 region 
19:0x00000000ae5e0000
     [    1.465077] ------------[ cut here ]------------
     [    1.465080] WARNING: CPU: 39 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.465081] Modules linked in:
     [    1.465083] CPU: 39 PID: 0 Comm: swapper/39 Tainted: G W         
5.5.0-rc5 #132
     [    1.465084] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.465086] pc : its_cpu_init+0x2f0/0x494
     [    1.465087] lr : its_cpu_init+0x2ec/0x494
     [    1.465088] sp : ffff8000121abee0
     [    1.465089] x29: ffff8000121abee0 x28: 0000000000000000
     [    1.465090] x27: 0000000000000000 x26: 0000000000000000
     [    1.465091] x25: 0000000000000000 x24: ffff800012760000
     [    1.465092] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.465093] x21: ffff8000117a9000 x20: fffffe0001cb1c00
     [    1.465094] x19: ffff8000117db000 x18: 0000000000000000
     [    1.465095] x17: 0000000000000000 x16: 0000000000000000
     [    1.465096] x15: 0000000000000000 x14: 0000000000000000
     [    1.465096] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.465098] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.465098] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.465099] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.465100] x5 : 00000000a0a0a0a0 x4 : ffff80006c9fb000
     [    1.465101] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.465102] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.465103] Call trace:
     [    1.465105]  its_cpu_init+0x2f0/0x494
     [    1.465106]  gic_starting_cpu+0x18/0x24
     [    1.465107]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.465108]  notify_cpu_starting+0x9c/0xb8
     [    1.465110]  secondary_start_kernel+0xdc/0x168
     [    1.465111] ---[ end trace f68728a0d3053b79 ]---
     [    1.465116] GICv3: CPU39: using allocated LPI pending table 
@0x000000007ac70000
     [    1.465137] Xen: initializing cpu39
     [    1.465146] CPU39: Booted secondary processor 0x0000000207 
[0x481fd010]
     [    1.494400] Detected VIPT I-cache on CPU40
     [    1.494475] GICv3: CPU40: found redistributor 208 region 
20:0x00000000ae600000
     [    1.501167] ------------[ cut here ]------------
     [    1.501172] WARNING: CPU: 40 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.501172] Modules linked in:
     [    1.501175] CPU: 40 PID: 0 Comm: swapper/40 Tainted: G W         
5.5.0-rc5 #132
     [    1.501177] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.501178] pc : its_cpu_init+0x2f0/0x494
     [    1.501179] lr : its_cpu_init+0x2ec/0x494
     [    1.501180] sp : ffff8000121b3ee0
     [    1.501181] x29: ffff8000121b3ee0 x28: 0000000000000000
     [    1.501182] x27: 0000000000000000 x26: 0000000000000000
     [    1.501183] x25: 0000000000000000 x24: ffff8000127c0000
     [    1.501184] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.501185] x21: ffff8000117a9000 x20: fffffe0001cb2000
     [    1.501186] x19: ffff8000117db000 x18: 0000000000000000
     [    1.501187] x17: 0000000000000000 x16: 0000000000000000
     [    1.501188] x15: 0000000000000000 x14: 0000000000000000
     [    1.501189] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.501190] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.501191] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.501192] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.501193] x5 : 00000000a0a0a0a0 x4 : ffff80006ca11000
     [    1.501194] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.501194] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.501196] Call trace:
     [    1.501197]  its_cpu_init+0x2f0/0x494
     [    1.501198]  gic_starting_cpu+0x18/0x24
     [    1.501200]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.501201]  notify_cpu_starting+0x9c/0xb8
     [    1.501202]  secondary_start_kernel+0xdc/0x168
     [    1.501203] ---[ end trace f68728a0d3053b7a ]---
     [    1.501209] GICv3: CPU40: using allocated LPI pending table 
@0x000000007ac80000
     [    1.501238] Xen: initializing cpu40
     [    1.501250] CPU40: Booted secondary processor 0x0000000208 
[0x481fd010]
     [    1.530467] Detected VIPT I-cache on CPU41
     [    1.530535] GICv3: CPU41: found redistributor 209 region 
20:0x00000000ae620000
     [    1.537225] ------------[ cut here ]------------
     [    1.537229] WARNING: CPU: 41 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.537229] Modules linked in:
     [    1.537231] CPU: 41 PID: 0 Comm: swapper/41 Tainted: G W         
5.5.0-rc5 #132
     [    1.537233] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.537234] pc : its_cpu_init+0x2f0/0x494
     [    1.537236] lr : its_cpu_init+0x2ec/0x494
     [    1.537236] sp : ffff8000121bbee0
     [    1.537237] x29: ffff8000121bbee0 x28: 0000000000000000
     [    1.537238] x27: 0000000000000000 x26: 0000000000000000
     [    1.537239] x25: 0000000000000000 x24: ffff8000127e0000
     [    1.537240] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.537241] x21: ffff8000117a9000 x20: fffffe0001cb2400
     [    1.537242] x19: ffff8000117db000 x18: 0000000000000000
     [    1.537244] x17: 0000000000000000 x16: 0000000000000000
     [    1.537244] x15: 0000000000000000 x14: 0000000000000000
     [    1.537246] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.537246] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.537247] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.537248] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.537249] x5 : 00000000a0a0a0a0 x4 : ffff80006ca27000
     [    1.537251] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.537251] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.537252] Call trace:
     [    1.537254]  its_cpu_init+0x2f0/0x494
     [    1.537255]  gic_starting_cpu+0x18/0x24
     [    1.537256]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.537258]  notify_cpu_starting+0x9c/0xb8
     [    1.537259]  secondary_start_kernel+0xdc/0x168
     [    1.537260] ---[ end trace f68728a0d3053b7b ]---
     [    1.537265] GICv3: CPU41: using allocated LPI pending table 
@0x000000007ac90000
     [    1.537287] Xen: initializing cpu41
     [    1.537297] CPU41: Booted secondary processor 0x0000000209 
[0x481fd010]
     [    1.566545] Detected VIPT I-cache on CPU42
     [    1.566617] GICv3: CPU42: found redistributor 20a region 
21:0x00000000ae640000
     [    1.573307] ------------[ cut here ]------------
     [    1.573310] WARNING: CPU: 42 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.573311] Modules linked in:
     [    1.573313] CPU: 42 PID: 0 Comm: swapper/42 Tainted: G W         
5.5.0-rc5 #132
     [    1.573314] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.573316] pc : its_cpu_init+0x2f0/0x494
     [    1.573317] lr : its_cpu_init+0x2ec/0x494
     [    1.573318] sp : ffff80001220bee0
     [    1.573319] x29: ffff80001220bee0 x28: 0000000000000000
     [    1.573320] x27: 0000000000000000 x26: 0000000000000000
     [    1.573321] x25: 0000000000000000 x24: ffff800012840000
     [    1.573322] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.573323] x21: ffff8000117a9000 x20: fffffe0001cb2800
     [    1.573324] x19: ffff8000117db000 x18: 0000000000000000
     [    1.573325] x17: 0000000000000000 x16: 0000000000000000
     [    1.573326] x15: 0000000000000000 x14: 0000000000000000
     [    1.573326] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.573327] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.573328] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.573329] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.573330] x5 : 00000000a0a0a0a0 x4 : ffff80006ca3d000
     [    1.573331] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.573332] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.573333] Call trace:
     [    1.573335]  its_cpu_init+0x2f0/0x494
     [    1.573336]  gic_starting_cpu+0x18/0x24
     [    1.573337]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.573338]  notify_cpu_starting+0x9c/0xb8
     [    1.573340]  secondary_start_kernel+0xdc/0x168
     [    1.573340] ---[ end trace f68728a0d3053b7c ]---
     [    1.573346] GICv3: CPU42: using allocated LPI pending table 
@0x000000007aca0000
     [    1.573368] Xen: initializing cpu42
     [    1.573377] CPU42: Booted secondary processor 0x000000020a 
[0x481fd010]
     [    1.602620] Detected VIPT I-cache on CPU43
     [    1.602690] GICv3: CPU43: found redistributor 20b region 
21:0x00000000ae660000
     [    1.609380] ------------[ cut here ]------------
     [    1.609384] WARNING: CPU: 43 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.609384] Modules linked in:
     [    1.609386] CPU: 43 PID: 0 Comm: swapper/43 Tainted: G W         
5.5.0-rc5 #132
     [    1.609387] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.609389] pc : its_cpu_init+0x2f0/0x494
     [    1.609390] lr : its_cpu_init+0x2ec/0x494
     [    1.609391] sp : ffff800012213ee0
     [    1.609392] x29: ffff800012213ee0 x28: 0000000000000000
     [    1.609393] x27: 0000000000000000 x26: 0000000000000000
     [    1.609394] x25: 0000000000000000 x24: ffff800012860000
     [    1.609395] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.609396] x21: ffff8000117a9000 x20: fffffe0001cb2c00
     [    1.609397] x19: ffff8000117db000 x18: 0000000000000000
     [    1.609398] x17: 0000000000000000 x16: 0000000000000000
     [    1.609399] x15: 0000000000000000 x14: 0000000000000000
     [    1.609399] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.609400] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.609401] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.609402] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.609403] x5 : 00000000a0a0a0a0 x4 : ffff80006ca53000
     [    1.609404] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.609405] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.609406] Call trace:
     [    1.609408]  its_cpu_init+0x2f0/0x494
     [    1.609409]  gic_starting_cpu+0x18/0x24
     [    1.609410]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.609411]  notify_cpu_starting+0x9c/0xb8
     [    1.609413]  secondary_start_kernel+0xdc/0x168
     [    1.609413] ---[ end trace f68728a0d3053b7d ]---
     [    1.609419] GICv3: CPU43: using allocated LPI pending table 
@0x000000007acb0000
     [    1.609442] Xen: initializing cpu43
     [    1.609452] CPU43: Booted secondary processor 0x000000020b 
[0x481fd010]
     [    1.638706] Detected VIPT I-cache on CPU44
     [    1.638785] GICv3: CPU44: found redistributor 20c region 
22:0x00000000ae680000
     [    1.645479] ------------[ cut here ]------------
     [    1.645483] WARNING: CPU: 44 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.645484] Modules linked in:
     [    1.645486] CPU: 44 PID: 0 Comm: swapper/44 Tainted: G W         
5.5.0-rc5 #132
     [    1.645488] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.645489] pc : its_cpu_init+0x2f0/0x494
     [    1.645491] lr : its_cpu_init+0x2ec/0x494
     [    1.645492] sp : ffff80001221bee0
     [    1.645492] x29: ffff80001221bee0 x28: 0000000000000000
     [    1.645494] x27: 0000000000000000 x26: 0000000000000000
     [    1.645495] x25: 0000000000000000 x24: ffff8000128c0000
     [    1.645496] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.645497] x21: ffff8000117a9000 x20: fffffe0001cb3000
     [    1.645497] x19: ffff8000117db000 x18: 0000000000000000
     [    1.645499] x17: 0000000000000000 x16: 0000000000000000
     [    1.645500] x15: 0000000000000000 x14: 0000000000000000
     [    1.645501] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.645502] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.645503] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.645504] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.645505] x5 : 00000000a0a0a0a0 x4 : ffff80006ca69000
     [    1.645506] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.645507] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.645508] Call trace:
     [    1.645510]  its_cpu_init+0x2f0/0x494
     [    1.645511]  gic_starting_cpu+0x18/0x24
     [    1.645513]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.645514]  notify_cpu_starting+0x9c/0xb8
     [    1.645516]  secondary_start_kernel+0xdc/0x168
     [    1.645517] ---[ end trace f68728a0d3053b7e ]---
     [    1.645522] GICv3: CPU44: using allocated LPI pending table 
@0x000000007acc0000
     [    1.645549] Xen: initializing cpu44
     [    1.645561] CPU44: Booted secondary processor 0x000000020c 
[0x481fd010]
     [    1.674775] Detected VIPT I-cache on CPU45
     [    1.674848] GICv3: CPU45: found redistributor 20d region 
22:0x00000000ae6a0000
     [    1.681539] ------------[ cut here ]------------
     [    1.681543] WARNING: CPU: 45 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.681543] Modules linked in:
     [    1.681546] CPU: 45 PID: 0 Comm: swapper/45 Tainted: G W         
5.5.0-rc5 #132
     [    1.681547] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.681549] pc : its_cpu_init+0x2f0/0x494
     [    1.681550] lr : its_cpu_init+0x2ec/0x494
     [    1.681551] sp : ffff800012223ee0
     [    1.681552] x29: ffff800012223ee0 x28: 0000000000000000
     [    1.681553] x27: 0000000000000000 x26: 0000000000000000
     [    1.681554] x25: 0000000000000000 x24: ffff8000128e0000
     [    1.681555] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.681556] x21: ffff8000117a9000 x20: fffffe0001cb3400
     [    1.681557] x19: ffff8000117db000 x18: 0000000000000000
     [    1.681558] x17: 0000000000000000 x16: 0000000000000000
     [    1.681559] x15: 0000000000000000 x14: 0000000000000000
     [    1.681560] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.681561] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.681562] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.681562] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.681563] x5 : 00000000a0a0a0a0 x4 : ffff80006ca7f000
     [    1.681564] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.681565] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.681566] Call trace:
     [    1.681568]  its_cpu_init+0x2f0/0x494
     [    1.681569]  gic_starting_cpu+0x18/0x24
     [    1.681570]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.681572]  notify_cpu_starting+0x9c/0xb8
     [    1.681573]  secondary_start_kernel+0xdc/0x168
     [    1.681574] ---[ end trace f68728a0d3053b7f ]---
     [    1.681579] GICv3: CPU45: using allocated LPI pending table 
@0x000000007acd0000
     [    1.681602] Xen: initializing cpu45
     [    1.681611] CPU45: Booted secondary processor 0x000000020d 
[0x481fd010]
     [    1.710850] Detected VIPT I-cache on CPU46
     [    1.710928] GICv3: CPU46: found redistributor 20e region 
23:0x00000000ae6c0000
     [    1.717619] ------------[ cut here ]------------
     [    1.717623] WARNING: CPU: 46 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.717623] Modules linked in:
     [    1.717625] CPU: 46 PID: 0 Comm: swapper/46 Tainted: G W         
5.5.0-rc5 #132
     [    1.717627] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.717628] pc : its_cpu_init+0x2f0/0x494
     [    1.717630] lr : its_cpu_init+0x2ec/0x494
     [    1.717630] sp : ffff80001222bee0
     [    1.717631] x29: ffff80001222bee0 x28: 0000000000000000
     [    1.717632] x27: 0000000000000000 x26: 0000000000000000
     [    1.717633] x25: 0000000000000000 x24: ffff800012940000
     [    1.717635] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.717636] x21: ffff8000117a9000 x20: fffffe0001cb3800
     [    1.717637] x19: ffff8000117db000 x18: 0000000000000000
     [    1.717638] x17: 0000000000000000 x16: 0000000000000000
     [    1.717639] x15: 0000000000000000 x14: 0000000000000000
     [    1.717640] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.717641] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.717642] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.717643] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.717644] x5 : 00000000a0a0a0a0 x4 : ffff80006ca95000
     [    1.717645] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.717646] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.717648] Call trace:
     [    1.717649]  its_cpu_init+0x2f0/0x494
     [    1.717650]  gic_starting_cpu+0x18/0x24
     [    1.717652]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.717653]  notify_cpu_starting+0x9c/0xb8
     [    1.717654]  secondary_start_kernel+0xdc/0x168
     [    1.717655] ---[ end trace f68728a0d3053b80 ]---
     [    1.717661] GICv3: CPU46: using allocated LPI pending table 
@0x000000007ace0000
     [    1.717682] Xen: initializing cpu46
     [    1.717692] CPU46: Booted secondary processor 0x000000020e 
[0x481fd010]
     [    1.746926] Detected VIPT I-cache on CPU47
     [    1.747002] GICv3: CPU47: found redistributor 20f region 
23:0x00000000ae6e0000
     [    1.753692] ------------[ cut here ]------------
     [    1.753696] WARNING: CPU: 47 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.753696] Modules linked in:
     [    1.753698] CPU: 47 PID: 0 Comm: swapper/47 Tainted: G W         
5.5.0-rc5 #132
     [    1.753699] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.753701] pc : its_cpu_init+0x2f0/0x494
     [    1.753703] lr : its_cpu_init+0x2ec/0x494
     [    1.753703] sp : ffff800012233ee0
     [    1.753704] x29: ffff800012233ee0 x28: 0000000000000000
     [    1.753705] x27: 0000000000000000 x26: 0000000000000000
     [    1.753706] x25: 0000000000000000 x24: ffff800012960000
     [    1.753707] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.753708] x21: ffff8000117a9000 x20: fffffe0001cb3c00
     [    1.753709] x19: ffff8000117db000 x18: 0000000000000000
     [    1.753710] x17: 0000000000000000 x16: 0000000000000000
     [    1.753711] x15: 0000000000000000 x14: 0000000000000000
     [    1.753712] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.753713] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.753714] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.753715] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.753716] x5 : 00000000a0a0a0a0 x4 : ffff80006caab000
     [    1.753717] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.753717] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.753718] Call trace:
     [    1.753720]  its_cpu_init+0x2f0/0x494
     [    1.753721]  gic_starting_cpu+0x18/0x24
     [    1.753723]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.753724]  notify_cpu_starting+0x9c/0xb8
     [    1.753725]  secondary_start_kernel+0xdc/0x168
     [    1.753726] ---[ end trace f68728a0d3053b81 ]---
     [    1.753731] GICv3: CPU47: using allocated LPI pending table 
@0x000000007acf0000
     [    1.753753] Xen: initializing cpu47
     [    1.753762] CPU47: Booted secondary processor 0x000000020f 
[0x481fd010]
     [    1.783010] Detected VIPT I-cache on CPU48
     [    1.783098] GICv3: CPU48: found redistributor 300 region 
24:0x00000000ae700000
     [    1.789791] ------------[ cut here ]------------
     [    1.789795] WARNING: CPU: 48 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.789796] Modules linked in:
     [    1.789799] CPU: 48 PID: 0 Comm: swapper/48 Tainted: G W         
5.5.0-rc5 #132
     [    1.789800] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.789802] pc : its_cpu_init+0x2f0/0x494
     [    1.789803] lr : its_cpu_init+0x2ec/0x494
     [    1.789804] sp : ffff80001228bee0
     [    1.789804] x29: ffff80001228bee0 x28: 0000000000000000
     [    1.789806] x27: 0000000000000000 x26: 0000000000000000
     [    1.789807] x25: 0000000000000000 x24: ffff8000129c0000
     [    1.789808] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.789809] x21: ffff8000117a9000 x20: fffffe0001cb4000
     [    1.789810] x19: ffff8000117db000 x18: 0000000000000000
     [    1.789810] x17: 0000000000000000 x16: 0000000000000000
     [    1.789811] x15: 0000000000000000 x14: 0000000000000000
     [    1.789812] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.789813] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.789814] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.789815] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.789816] x5 : 00000000a0a0a0a0 x4 : ffff80006cac1000
     [    1.789817] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.789818] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.789819] Call trace:
     [    1.789821]  its_cpu_init+0x2f0/0x494
     [    1.789822]  gic_starting_cpu+0x18/0x24
     [    1.789824]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.789825]  notify_cpu_starting+0x9c/0xb8
     [    1.789827]  secondary_start_kernel+0xdc/0x168
     [    1.789827] ---[ end trace f68728a0d3053b82 ]---
     [    1.789833] GICv3: CPU48: using allocated LPI pending table 
@0x000000007ad00000
     [    1.789859] Xen: initializing cpu48
     [    1.789871] CPU48: Booted secondary processor 0x0000000300 
[0x481fd010]
     [    1.819085] Detected VIPT I-cache on CPU49
     [    1.819164] GICv3: CPU49: found redistributor 301 region 
24:0x00000000ae720000
     [    1.825854] ------------[ cut here ]------------
     [    1.825858] WARNING: CPU: 49 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.825858] Modules linked in:
     [    1.825860] CPU: 49 PID: 0 Comm: swapper/49 Tainted: G W         
5.5.0-rc5 #132
     [    1.825862] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.825863] pc : its_cpu_init+0x2f0/0x494
     [    1.825865] lr : its_cpu_init+0x2ec/0x494
     [    1.825865] sp : ffff800012293ee0
     [    1.825866] x29: ffff800012293ee0 x28: 0000000000000000
     [    1.825867] x27: 0000000000000000 x26: 0000000000000000
     [    1.825868] x25: 0000000000000000 x24: ffff8000129e0000
     [    1.825869] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.825870] x21: ffff8000117a9000 x20: fffffe0001cb4400
     [    1.825871] x19: ffff8000117db000 x18: 0000000000000000
     [    1.825872] x17: 0000000000000000 x16: 0000000000000000
     [    1.825873] x15: 0000000000000000 x14: 0000000000000000
     [    1.825874] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.825875] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.825876] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.825877] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.825878] x5 : 00000000a0a0a0a0 x4 : ffff80006cad7000
     [    1.825879] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.825879] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.825880] Call trace:
     [    1.825882]  its_cpu_init+0x2f0/0x494
     [    1.825883]  gic_starting_cpu+0x18/0x24
     [    1.825885]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.825886]  notify_cpu_starting+0x9c/0xb8
     [    1.825887]  secondary_start_kernel+0xdc/0x168
     [    1.825888] ---[ end trace f68728a0d3053b83 ]---
     [    1.825893] GICv3: CPU49: using allocated LPI pending table 
@0x000000007ad10000
     [    1.825915] Xen: initializing cpu49
     [    1.825925] CPU49: Booted secondary processor 0x0000000301 
[0x481fd010]
     [    1.855177] Detected VIPT I-cache on CPU50
     [    1.855260] GICv3: CPU50: found redistributor 302 region 
25:0x00000000ae740000
     [    1.861951] ------------[ cut here ]------------
     [    1.861955] WARNING: CPU: 50 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.861955] Modules linked in:
     [    1.861957] CPU: 50 PID: 0 Comm: swapper/50 Tainted: G W         
5.5.0-rc5 #132
     [    1.861959] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.861960] pc : its_cpu_init+0x2f0/0x494
     [    1.861962] lr : its_cpu_init+0x2ec/0x494
     [    1.861962] sp : ffff80001229bee0
     [    1.861963] x29: ffff80001229bee0 x28: 0000000000000000
     [    1.861964] x27: 0000000000000000 x26: 0000000000000000
     [    1.861965] x25: 0000000000000000 x24: ffff800012a40000
     [    1.861966] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.861967] x21: ffff8000117a9000 x20: fffffe0001cb4800
     [    1.861968] x19: ffff8000117db000 x18: 0000000000000000
     [    1.861969] x17: 0000000000000000 x16: 0000000000000000
     [    1.861970] x15: 0000000000000000 x14: 0000000000000000
     [    1.861971] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.861972] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.861973] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.861974] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.861975] x5 : 00000000a0a0a0a0 x4 : ffff80006caed000
     [    1.861976] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.861977] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.861978] Call trace:
     [    1.861980]  its_cpu_init+0x2f0/0x494
     [    1.861981]  gic_starting_cpu+0x18/0x24
     [    1.861983]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.861984]  notify_cpu_starting+0x9c/0xb8
     [    1.861985]  secondary_start_kernel+0xdc/0x168
     [    1.861986] ---[ end trace f68728a0d3053b84 ]---
     [    1.861992] GICv3: CPU50: using allocated LPI pending table 
@0x000000007ad20000
     [    1.862012] Xen: initializing cpu50
     [    1.862022] CPU50: Booted secondary processor 0x0000000302 
[0x481fd010]
     [    1.891240] Detected VIPT I-cache on CPU51
     [    1.891321] GICv3: CPU51: found redistributor 303 region 
25:0x00000000ae760000
     [    1.898013] ------------[ cut here ]------------
     [    1.898016] WARNING: CPU: 51 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.898017] Modules linked in:
     [    1.898019] CPU: 51 PID: 0 Comm: swapper/51 Tainted: G W         
5.5.0-rc5 #132
     [    1.898020] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.898022] pc : its_cpu_init+0x2f0/0x494
     [    1.898023] lr : its_cpu_init+0x2ec/0x494
     [    1.898024] sp : ffff8000122a3ee0
     [    1.898025] x29: ffff8000122a3ee0 x28: 0000000000000000
     [    1.898026] x27: 0000000000000000 x26: 0000000000000000
     [    1.898027] x25: 0000000000000000 x24: ffff800012a60000
     [    1.898028] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.898029] x21: ffff8000117a9000 x20: fffffe0001cb4c00
     [    1.898030] x19: ffff8000117db000 x18: 0000000000000000
     [    1.898031] x17: 0000000000000000 x16: 0000000000000000
     [    1.898032] x15: 0000000000000000 x14: 0000000000000000
     [    1.898033] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.898034] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.898035] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.898035] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.898036] x5 : 00000000a0a0a0a0 x4 : ffff80006cb03000
     [    1.898038] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.898038] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.898040] Call trace:
     [    1.898041]  its_cpu_init+0x2f0/0x494
     [    1.898043]  gic_starting_cpu+0x18/0x24
     [    1.898044]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.898045]  notify_cpu_starting+0x9c/0xb8
     [    1.898047]  secondary_start_kernel+0xdc/0x168
     [    1.898047] ---[ end trace f68728a0d3053b85 ]---
     [    1.898053] GICv3: CPU51: using allocated LPI pending table 
@0x000000007ad30000
     [    1.898073] Xen: initializing cpu51
     [    1.898083] CPU51: Booted secondary processor 0x0000000303 
[0x481fd010]
     [    1.927327] Detected VIPT I-cache on CPU52
     [    1.927417] GICv3: CPU52: found redistributor 304 region 
26:0x00000000ae780000
     [    1.934111] ------------[ cut here ]------------
     [    1.934115] WARNING: CPU: 52 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.934116] Modules linked in:
     [    1.934119] CPU: 52 PID: 0 Comm: swapper/52 Tainted: G W         
5.5.0-rc5 #132
     [    1.934120] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.934122] pc : its_cpu_init+0x2f0/0x494
     [    1.934123] lr : its_cpu_init+0x2ec/0x494
     [    1.934124] sp : ffff8000122abee0
     [    1.934125] x29: ffff8000122abee0 x28: 0000000000000000
     [    1.934126] x27: 0000000000000000 x26: 0000000000000000
     [    1.934127] x25: 0000000000000000 x24: ffff800012ac0000
     [    1.934128] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.934129] x21: ffff8000117a9000 x20: fffffe0001cb5000
     [    1.934130] x19: ffff8000117db000 x18: 0000000000000000
     [    1.934131] x17: 0000000000000000 x16: 0000000000000000
     [    1.934132] x15: 0000000000000000 x14: 0000000000000000
     [    1.934133] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.934134] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.934135] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.934136] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.934137] x5 : 00000000a0a0a0a0 x4 : ffff80006cb19000
     [    1.934138] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.934139] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.934141] Call trace:
     [    1.934142]  its_cpu_init+0x2f0/0x494
     [    1.934143]  gic_starting_cpu+0x18/0x24
     [    1.934145]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.934146]  notify_cpu_starting+0x9c/0xb8
     [    1.934148]  secondary_start_kernel+0xdc/0x168
     [    1.934149] ---[ end trace f68728a0d3053b86 ]---
     [    1.934155] GICv3: CPU52: using allocated LPI pending table 
@0x000000007ad40000
     [    1.934182] Xen: initializing cpu52
     [    1.934194] CPU52: Booted secondary processor 0x0000000304 
[0x481fd010]
     [    1.963397] Detected VIPT I-cache on CPU53
     [    1.963481] GICv3: CPU53: found redistributor 305 region 
26:0x00000000ae7a0000
     [    1.970172] ------------[ cut here ]------------
     [    1.970175] WARNING: CPU: 53 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    1.970176] Modules linked in:
     [    1.970178] CPU: 53 PID: 0 Comm: swapper/53 Tainted: G W         
5.5.0-rc5 #132
     [    1.970179] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    1.970181] pc : its_cpu_init+0x2f0/0x494
     [    1.970182] lr : its_cpu_init+0x2ec/0x494
     [    1.970183] sp : ffff8000122b3ee0
     [    1.970184] x29: ffff8000122b3ee0 x28: 0000000000000000
     [    1.970185] x27: 0000000000000000 x26: 0000000000000000
     [    1.970186] x25: 0000000000000000 x24: ffff800012ae0000
     [    1.970187] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    1.970188] x21: ffff8000117a9000 x20: fffffe0001cb5400
     [    1.970189] x19: ffff8000117db000 x18: 0000000000000000
     [    1.970190] x17: 0000000000000000 x16: 0000000000000000
     [    1.970190] x15: 0000000000000000 x14: 0000000000000000
     [    1.970191] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    1.970192] x11: ffffffffffffffff x10: ffff8000119916a0
     [    1.970193] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    1.970194] x7 : 0000000000000000 x6 : 0000000000000070
     [    1.970195] x5 : 00000000a0a0a0a0 x4 : ffff80006cb2f000
     [    1.970196] x3 : 000000000000003d x2 : ffffffffffffffff
     [    1.970197] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    1.970198] Call trace:
     [    1.970200]  its_cpu_init+0x2f0/0x494
     [    1.970201]  gic_starting_cpu+0x18/0x24
     [    1.970203]  cpuhp_invoke_callback+0x84/0x1e0
     [    1.970204]  notify_cpu_starting+0x9c/0xb8
     [    1.970205]  secondary_start_kernel+0xdc/0x168
     [    1.970206] ---[ end trace f68728a0d3053b87 ]---
     [    1.970212] GICv3: CPU53: using allocated LPI pending table 
@0x000000007ad50000
     [    1.970233] Xen: initializing cpu53
     [    1.970242] CPU53: Booted secondary processor 0x0000000305 
[0x481fd010]
     [    1.999476] Detected VIPT I-cache on CPU54
     [    1.999564] GICv3: CPU54: found redistributor 306 region 
27:0x00000000ae7c0000
     [    2.006254] ------------[ cut here ]------------
     [    2.006258] WARNING: CPU: 54 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.006259] Modules linked in:
     [    2.006261] CPU: 54 PID: 0 Comm: swapper/54 Tainted: G W         
5.5.0-rc5 #132
     [    2.006262] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.006264] pc : its_cpu_init+0x2f0/0x494
     [    2.006265] lr : its_cpu_init+0x2ec/0x494
     [    2.006266] sp : ffff8000122bbee0
     [    2.006267] x29: ffff8000122bbee0 x28: 0000000000000000
     [    2.006268] x27: 0000000000000000 x26: 0000000000000000
     [    2.006269] x25: 0000000000000000 x24: ffff800012b40000
     [    2.006270] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.006271] x21: ffff8000117a9000 x20: fffffe0001cb5800
     [    2.006272] x19: ffff8000117db000 x18: 0000000000000000
     [    2.006273] x17: 0000000000000000 x16: 0000000000000000
     [    2.006274] x15: 0000000000000000 x14: 0000000000000000
     [    2.006275] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.006276] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.006277] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.006278] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.006279] x5 : 00000000a0a0a0a0 x4 : ffff80006cb45000
     [    2.006280] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.006281] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.006282] Call trace:
     [    2.006284]  its_cpu_init+0x2f0/0x494
     [    2.006285]  gic_starting_cpu+0x18/0x24
     [    2.006286]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.006287]  notify_cpu_starting+0x9c/0xb8
     [    2.006289]  secondary_start_kernel+0xdc/0x168
     [    2.006290] ---[ end trace f68728a0d3053b88 ]---
     [    2.006295] GICv3: CPU54: using allocated LPI pending table 
@0x000000007ad60000
     [    2.006317] Xen: initializing cpu54
     [    2.006326] CPU54: Booted secondary processor 0x0000000306 
[0x481fd010]
     [    2.035555] Detected VIPT I-cache on CPU55
     [    2.035641] GICv3: CPU55: found redistributor 307 region 
27:0x00000000ae7e0000
     [    2.042332] ------------[ cut here ]------------
     [    2.042336] WARNING: CPU: 55 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.042336] Modules linked in:
     [    2.042339] CPU: 55 PID: 0 Comm: swapper/55 Tainted: G W         
5.5.0-rc5 #132
     [    2.042340] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.042341] pc : its_cpu_init+0x2f0/0x494
     [    2.042343] lr : its_cpu_init+0x2ec/0x494
     [    2.042344] sp : ffff80001230bee0
     [    2.042344] x29: ffff80001230bee0 x28: 0000000000000000
     [    2.042345] x27: 0000000000000000 x26: 0000000000000000
     [    2.042346] x25: 0000000000000000 x24: ffff800012b60000
     [    2.042347] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.042348] x21: ffff8000117a9000 x20: fffffe0001cb5c00
     [    2.042350] x19: ffff8000117db000 x18: 0000000000000000
     [    2.042351] x17: 0000000000000000 x16: 0000000000000000
     [    2.042351] x15: 0000000000000000 x14: 0000000000000000
     [    2.042352] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.042353] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.042354] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.042355] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.042356] x5 : 00000000a0a0a0a0 x4 : ffff80006cb5b000
     [    2.042357] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.042358] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.042359] Call trace:
     [    2.042361]  its_cpu_init+0x2f0/0x494
     [    2.042362]  gic_starting_cpu+0x18/0x24
     [    2.042363]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.042364]  notify_cpu_starting+0x9c/0xb8
     [    2.042366]  secondary_start_kernel+0xdc/0x168
     [    2.042366] ---[ end trace f68728a0d3053b89 ]---
     [    2.042372] GICv3: CPU55: using allocated LPI pending table 
@0x000000007ad70000
     [    2.042393] Xen: initializing cpu55
     [    2.042402] CPU55: Booted secondary processor 0x0000000307 
[0x481fd010]
     [    2.071639] Detected VIPT I-cache on CPU56
     [    2.071735] GICv3: CPU56: found redistributor 308 region 
28:0x00000000ae800000
     [    2.078428] ------------[ cut here ]------------
     [    2.078432] WARNING: CPU: 56 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.078433] Modules linked in:
     [    2.078436] CPU: 56 PID: 0 Comm: swapper/56 Tainted: G W         
5.5.0-rc5 #132
     [    2.078437] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.078439] pc : its_cpu_init+0x2f0/0x494
     [    2.078440] lr : its_cpu_init+0x2ec/0x494
     [    2.078441] sp : ffff800012313ee0
     [    2.078441] x29: ffff800012313ee0 x28: 0000000000000000
     [    2.078443] x27: 0000000000000000 x26: 0000000000000000
     [    2.078444] x25: 0000000000000000 x24: ffff800012bc0000
     [    2.078445] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.078446] x21: ffff8000117a9000 x20: fffffe0001cb6000
     [    2.078447] x19: ffff8000117db000 x18: 0000000000000000
     [    2.078448] x17: 0000000000000000 x16: 0000000000000000
     [    2.078448] x15: 0000000000000000 x14: 0000000000000000
     [    2.078449] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.078450] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.078452] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.078452] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.078453] x5 : 00000000a0a0a0a0 x4 : ffff80006cb71000
     [    2.078454] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.078455] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.078456] Call trace:
     [    2.078458]  its_cpu_init+0x2f0/0x494
     [    2.078459]  gic_starting_cpu+0x18/0x24
     [    2.078461]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.078462]  notify_cpu_starting+0x9c/0xb8
     [    2.078463]  secondary_start_kernel+0xdc/0x168
     [    2.078464] ---[ end trace f68728a0d3053b8a ]---
     [    2.078471] GICv3: CPU56: using allocated LPI pending table 
@0x000000007ad80000
     [    2.078496] Xen: initializing cpu56
     [    2.078509] CPU56: Booted secondary processor 0x0000000308 
[0x481fd010]
     [    2.107711] Detected VIPT I-cache on CPU57
     [    2.107801] GICv3: CPU57: found redistributor 309 region 
28:0x00000000ae820000
     [    2.114492] ------------[ cut here ]------------
     [    2.114495] WARNING: CPU: 57 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.114495] Modules linked in:
     [    2.114497] CPU: 57 PID: 0 Comm: swapper/57 Tainted: G W         
5.5.0-rc5 #132
     [    2.114499] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.114500] pc : its_cpu_init+0x2f0/0x494
     [    2.114502] lr : its_cpu_init+0x2ec/0x494
     [    2.114502] sp : ffff80001231bee0
     [    2.114503] x29: ffff80001231bee0 x28: 0000000000000000
     [    2.114504] x27: 0000000000000000 x26: 0000000000000000
     [    2.114505] x25: 0000000000000000 x24: ffff800012be0000
     [    2.114507] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.114508] x21: ffff8000117a9000 x20: fffffe0001cb6400
     [    2.114509] x19: ffff8000117db000 x18: 0000000000000000
     [    2.114510] x17: 0000000000000000 x16: 0000000000000000
     [    2.114511] x15: 0000000000000000 x14: 0000000000000000
     [    2.114512] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.114513] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.114514] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.114515] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.114516] x5 : 00000000a0a0a0a0 x4 : ffff80006cb87000
     [    2.114517] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.114518] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.114519] Call trace:
     [    2.114520]  its_cpu_init+0x2f0/0x494
     [    2.114521]  gic_starting_cpu+0x18/0x24
     [    2.114523]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.114524]  notify_cpu_starting+0x9c/0xb8
     [    2.114525]  secondary_start_kernel+0xdc/0x168
     [    2.114526] ---[ end trace f68728a0d3053b8b ]---
     [    2.114531] GICv3: CPU57: using allocated LPI pending table 
@0x000000007ad90000
     [    2.114553] Xen: initializing cpu57
     [    2.114563] CPU57: Booted secondary processor 0x0000000309 
[0x481fd010]
     [    2.143787] Detected VIPT I-cache on CPU58
     [    2.143881] GICv3: CPU58: found redistributor 30a region 
29:0x00000000ae840000
     [    2.150572] ------------[ cut here ]------------
     [    2.150576] WARNING: CPU: 58 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.150576] Modules linked in:
     [    2.150578] CPU: 58 PID: 0 Comm: swapper/58 Tainted: G W         
5.5.0-rc5 #132
     [    2.150580] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.150581] pc : its_cpu_init+0x2f0/0x494
     [    2.150583] lr : its_cpu_init+0x2ec/0x494
     [    2.150583] sp : ffff800012323ee0
     [    2.150584] x29: ffff800012323ee0 x28: 0000000000000000
     [    2.150585] x27: 0000000000000000 x26: 0000000000000000
     [    2.150586] x25: 0000000000000000 x24: ffff800012c40000
     [    2.150587] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.150588] x21: ffff8000117a9000 x20: fffffe0001cb6800
     [    2.150589] x19: ffff8000117db000 x18: 0000000000000000
     [    2.150590] x17: 0000000000000000 x16: 0000000000000000
     [    2.150591] x15: 0000000000000000 x14: 0000000000000000
     [    2.150592] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.150593] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.150594] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.150596] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.150596] x5 : 00000000a0a0a0a0 x4 : ffff80006cb9d000
     [    2.150598] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.150599] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.150600] Call trace:
     [    2.150601]  its_cpu_init+0x2f0/0x494
     [    2.150603]  gic_starting_cpu+0x18/0x24
     [    2.150604]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.150605]  notify_cpu_starting+0x9c/0xb8
     [    2.150606]  secondary_start_kernel+0xdc/0x168
     [    2.150607] ---[ end trace f68728a0d3053b8c ]---
     [    2.150613] GICv3: CPU58: using allocated LPI pending table 
@0x000000007ada0000
     [    2.150634] Xen: initializing cpu58
     [    2.150644] CPU58: Booted secondary processor 0x000000030a 
[0x481fd010]
     [    2.179863] Detected VIPT I-cache on CPU59
     [    2.179954] GICv3: CPU59: found redistributor 30b region 
29:0x00000000ae860000
     [    2.186646] ------------[ cut here ]------------
     [    2.186650] WARNING: CPU: 59 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.186650] Modules linked in:
     [    2.186652] CPU: 59 PID: 0 Comm: swapper/59 Tainted: G W         
5.5.0-rc5 #132
     [    2.186653] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.186655] pc : its_cpu_init+0x2f0/0x494
     [    2.186656] lr : its_cpu_init+0x2ec/0x494
     [    2.186657] sp : ffff80001232bee0
     [    2.186658] x29: ffff80001232bee0 x28: 0000000000000000
     [    2.186659] x27: 0000000000000000 x26: 0000000000000000
     [    2.186660] x25: 0000000000000000 x24: ffff800012c60000
     [    2.186661] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.186662] x21: ffff8000117a9000 x20: fffffe0001cb6c00
     [    2.186663] x19: ffff8000117db000 x18: 0000000000000000
     [    2.186664] x17: 0000000000000000 x16: 0000000000000000
     [    2.186664] x15: 0000000000000000 x14: 0000000000000000
     [    2.186665] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.186666] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.186667] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.186668] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.186669] x5 : 00000000a0a0a0a0 x4 : ffff80006cbb3000
     [    2.186670] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.186671] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.186672] Call trace:
     [    2.186674]  its_cpu_init+0x2f0/0x494
     [    2.186675]  gic_starting_cpu+0x18/0x24
     [    2.186677]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.186678]  notify_cpu_starting+0x9c/0xb8
     [    2.186679]  secondary_start_kernel+0xdc/0x168
     [    2.186680] ---[ end trace f68728a0d3053b8d ]---
     [    2.186686] GICv3: CPU59: using allocated LPI pending table 
@0x000000007adb0000
     [    2.186707] Xen: initializing cpu59
     [    2.186717] CPU59: Booted secondary processor 0x000000030b 
[0x481fd010]
     [    2.215944] Detected VIPT I-cache on CPU60
     [    2.216046] GICv3: CPU60: found redistributor 30c region 
30:0x00000000ae880000
     [    2.222739] ------------[ cut here ]------------
     [    2.222744] WARNING: CPU: 60 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.222744] Modules linked in:
     [    2.222747] CPU: 60 PID: 0 Comm: swapper/60 Tainted: G W         
5.5.0-rc5 #132
     [    2.222749] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.222750] pc : its_cpu_init+0x2f0/0x494
     [    2.222752] lr : its_cpu_init+0x2ec/0x494
     [    2.222752] sp : ffff800012333ee0
     [    2.222753] x29: ffff800012333ee0 x28: 0000000000000000
     [    2.222754] x27: 0000000000000000 x26: 0000000000000000
     [    2.222755] x25: 0000000000000000 x24: ffff800012cc0000
     [    2.222756] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.222757] x21: ffff8000117a9000 x20: fffffe0001cb7000
     [    2.222758] x19: ffff8000117db000 x18: 0000000000000000
     [    2.222759] x17: 0000000000000000 x16: 0000000000000000
     [    2.222760] x15: 0000000000000000 x14: 0000000000000000
     [    2.222761] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.222762] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.222763] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.222764] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.222765] x5 : 00000000a0a0a0a0 x4 : ffff80006cbc9000
     [    2.222766] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.222767] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.222768] Call trace:
     [    2.222769]  its_cpu_init+0x2f0/0x494
     [    2.222771]  gic_starting_cpu+0x18/0x24
     [    2.222772]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.222773]  notify_cpu_starting+0x9c/0xb8
     [    2.222775]  secondary_start_kernel+0xdc/0x168
     [    2.222776] ---[ end trace f68728a0d3053b8e ]---
     [    2.222781] GICv3: CPU60: using allocated LPI pending table 
@0x000000007adc0000
     [    2.222808] Xen: initializing cpu60
     [    2.222821] CPU60: Booted secondary processor 0x000000030c 
[0x481fd010]
     [    2.252018] Detected VIPT I-cache on CPU61
     [    2.252113] GICv3: CPU61: found redistributor 30d region 
30:0x00000000ae8a0000
     [    2.258804] ------------[ cut here ]------------
     [    2.258807] WARNING: CPU: 61 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.258808] Modules linked in:
     [    2.258810] CPU: 61 PID: 0 Comm: swapper/61 Tainted: G W         
5.5.0-rc5 #132
     [    2.258812] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.258813] pc : its_cpu_init+0x2f0/0x494
     [    2.258815] lr : its_cpu_init+0x2ec/0x494
     [    2.258815] sp : ffff80001238bee0
     [    2.258816] x29: ffff80001238bee0 x28: 0000000000000000
     [    2.258817] x27: 0000000000000000 x26: 0000000000000000
     [    2.258818] x25: 0000000000000000 x24: ffff800012ce0000
     [    2.258819] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.258820] x21: ffff8000117a9000 x20: fffffe0001cb7400
     [    2.258821] x19: ffff8000117db000 x18: 0000000000000000
     [    2.258822] x17: 0000000000000000 x16: 0000000000000000
     [    2.258823] x15: 0000000000000000 x14: 0000000000000000
     [    2.258824] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.258825] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.258826] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.258827] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.258828] x5 : 00000000a0a0a0a0 x4 : ffff80006cbdf000
     [    2.258829] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.258830] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.258831] Call trace:
     [    2.258832]  its_cpu_init+0x2f0/0x494
     [    2.258834]  gic_starting_cpu+0x18/0x24
     [    2.258835]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.258836]  notify_cpu_starting+0x9c/0xb8
     [    2.258837]  secondary_start_kernel+0xdc/0x168
     [    2.258838] ---[ end trace f68728a0d3053b8f ]---
     [    2.258843] GICv3: CPU61: using allocated LPI pending table 
@0x000000007add0000
     [    2.258865] Xen: initializing cpu61
     [    2.258875] CPU61: Booted secondary processor 0x000000030d 
[0x481fd010]
     [    2.288094] Detected VIPT I-cache on CPU62
     [    2.288193] GICv3: CPU62: found redistributor 30e region 
31:0x00000000ae8c0000
     [    2.294884] ------------[ cut here ]------------
     [    2.294888] WARNING: CPU: 62 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.294888] Modules linked in:
     [    2.294891] CPU: 62 PID: 0 Comm: swapper/62 Tainted: G W         
5.5.0-rc5 #132
     [    2.294892] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.294894] pc : its_cpu_init+0x2f0/0x494
     [    2.294895] lr : its_cpu_init+0x2ec/0x494
     [    2.294896] sp : ffff800012393ee0
     [    2.294896] x29: ffff800012393ee0 x28: 0000000000000000
     [    2.294898] x27: 0000000000000000 x26: 0000000000000000
     [    2.294899] x25: 0000000000000000 x24: ffff800012d40000
     [    2.294900] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.294901] x21: ffff8000117a9000 x20: fffffe0001cb7800
     [    2.294902] x19: ffff8000117db000 x18: 0000000000000000
     [    2.294903] x17: 0000000000000000 x16: 0000000000000000
     [    2.294904] x15: 0000000000000000 x14: 0000000000000000
     [    2.294905] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.294906] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.294907] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.294908] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.294909] x5 : 00000000a0a0a0a0 x4 : ffff80006cbf5000
     [    2.294910] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.294911] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.294912] Call trace:
     [    2.294914]  its_cpu_init+0x2f0/0x494
     [    2.294915]  gic_starting_cpu+0x18/0x24
     [    2.294916]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.294917]  notify_cpu_starting+0x9c/0xb8
     [    2.294919]  secondary_start_kernel+0xdc/0x168
     [    2.294919] ---[ end trace f68728a0d3053b90 ]---
     [    2.294925] GICv3: CPU62: using allocated LPI pending table 
@0x000000007ade0000
     [    2.294945] Xen: initializing cpu62
     [    2.294956] CPU62: Booted secondary processor 0x000000030e 
[0x481fd010]
     [    2.324170] Detected VIPT I-cache on CPU63
     [    2.324267] GICv3: CPU63: found redistributor 30f region 
31:0x00000000ae8e0000
     [    2.330959] ------------[ cut here ]------------
     [    2.330962] WARNING: CPU: 63 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.330963] Modules linked in:
     [    2.330965] CPU: 63 PID: 0 Comm: swapper/63 Tainted: G W         
5.5.0-rc5 #132
     [    2.330966] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.330967] pc : its_cpu_init+0x2f0/0x494
     [    2.330969] lr : its_cpu_init+0x2ec/0x494
     [    2.330969] sp : ffff80001239bee0
     [    2.330970] x29: ffff80001239bee0 x28: 0000000000000000
     [    2.330971] x27: 0000000000000000 x26: 0000000000000000
     [    2.330972] x25: 0000000000000000 x24: ffff800012d60000
     [    2.330973] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.330974] x21: ffff8000117a9000 x20: fffffe0001cb7c00
     [    2.330975] x19: ffff8000117db000 x18: 0000000000000000
     [    2.330977] x17: 0000000000000000 x16: 0000000000000000
     [    2.330978] x15: 0000000000000000 x14: 0000000000000000
     [    2.330979] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.330980] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.330981] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.330982] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.330983] x5 : 00000000a0a0a0a0 x4 : ffff80006cc0b000
     [    2.330984] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.330985] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.330986] Call trace:
     [    2.330987]  its_cpu_init+0x2f0/0x494
     [    2.330989]  gic_starting_cpu+0x18/0x24
     [    2.330990]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.330991]  notify_cpu_starting+0x9c/0xb8
     [    2.330992]  secondary_start_kernel+0xdc/0x168
     [    2.330993] ---[ end trace f68728a0d3053b91 ]---
     [    2.330999] GICv3: CPU63: using allocated LPI pending table 
@0x000000007adf0000
     [    2.331020] Xen: initializing cpu63
     [    2.331031] CPU63: Booted secondary processor 0x000000030f 
[0x481fd010]
     [    2.360280] Detected VIPT I-cache on CPU64
     [    2.360408] GICv3: CPU64: found redistributor 400 region 
32:0x00000000aa100000
     [    2.367122] ------------[ cut here ]------------
     [    2.367133] WARNING: CPU: 64 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.367134] Modules linked in:
     [    2.367139] CPU: 64 PID: 0 Comm: swapper/64 Tainted: G W         
5.5.0-rc5 #132
     [    2.367141] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.367143] pc : its_cpu_init+0x2f0/0x494
     [    2.367144] lr : its_cpu_init+0x2ec/0x494
     [    2.367145] sp : ffff8000123a3ee0
     [    2.367145] x29: ffff8000123a3ee0 x28: 0000000000000000
     [    2.367147] x27: 0000000000000000 x26: 0000000000000000
     [    2.367148] x25: 0000000000000000 x24: ffff800012dc0000
     [    2.367149] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.367150] x21: ffff8000117a9000 x20: fffffe0001cb8000
     [    2.367150] x19: ffff8000117db000 x18: 0000000000000000
     [    2.367151] x17: 0000000000000000 x16: 0000000000000000
     [    2.367152] x15: 0000000000000000 x14: 0000000000000000
     [    2.367153] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.367154] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.367155] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.367156] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.367157] x5 : 00000000a0a0a0a0 x4 : ffffa0260de8c000
     [    2.367158] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.367159] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.367161] Call trace:
     [    2.367163]  its_cpu_init+0x2f0/0x494
     [    2.367165]  gic_starting_cpu+0x18/0x24
     [    2.367168]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.367170]  notify_cpu_starting+0x9c/0xb8
     [    2.367173]  secondary_start_kernel+0xdc/0x168
     [    2.367174] ---[ end trace f68728a0d3053b92 ]---
     [    2.367182] GICv3: CPU64: using allocated LPI pending table 
@0x000000007ae00000
     [    2.367228] Xen: initializing cpu64
     [    2.367246] CPU64: Booted secondary processor 0x0000000400 
[0x481fd010]
     [    2.396335] Detected VIPT I-cache on CPU65
     [    2.396435] GICv3: CPU65: found redistributor 401 region 
32:0x00000000aa120000
     [    2.403128] ------------[ cut here ]------------
     [    2.403131] WARNING: CPU: 65 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.403132] Modules linked in:
     [    2.403135] CPU: 65 PID: 0 Comm: swapper/65 Tainted: G W         
5.5.0-rc5 #132
     [    2.403136] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.403138] pc : its_cpu_init+0x2f0/0x494
     [    2.403139] lr : its_cpu_init+0x2ec/0x494
     [    2.403140] sp : ffff8000123abee0
     [    2.403141] x29: ffff8000123abee0 x28: 0000000000000000
     [    2.403142] x27: 0000000000000000 x26: 0000000000000000
     [    2.403143] x25: 0000000000000000 x24: ffff800012de0000
     [    2.403144] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.403145] x21: ffff8000117a9000 x20: fffffe0001cb8400
     [    2.403146] x19: ffff8000117db000 x18: 0000000000000000
     [    2.403147] x17: 0000000000000000 x16: 0000000000000000
     [    2.403148] x15: 0000000000000000 x14: 0000000000000000
     [    2.403149] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.403150] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.403151] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.403152] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.403153] x5 : 00000000a0a0a0a0 x4 : ffffa0260dea2000
     [    2.403154] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.403155] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.403156] Call trace:
     [    2.403158]  its_cpu_init+0x2f0/0x494
     [    2.403159]  gic_starting_cpu+0x18/0x24
     [    2.403160]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.403162]  notify_cpu_starting+0x9c/0xb8
     [    2.403163]  secondary_start_kernel+0xdc/0x168
     [    2.403164] ---[ end trace f68728a0d3053b93 ]---
     [    2.403170] GICv3: CPU65: using allocated LPI pending table 
@0x000000007ae10000
     [    2.403194] Xen: initializing cpu65
     [    2.403203] CPU65: Booted secondary processor 0x0000000401 
[0x481fd010]
     [    2.432415] Detected VIPT I-cache on CPU66
     [    2.432515] GICv3: CPU66: found redistributor 402 region 
33:0x00000000aa140000
     [    2.439209] ------------[ cut here ]------------
     [    2.439213] WARNING: CPU: 66 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.439213] Modules linked in:
     [    2.439215] CPU: 66 PID: 0 Comm: swapper/66 Tainted: G W         
5.5.0-rc5 #132
     [    2.439217] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.439219] pc : its_cpu_init+0x2f0/0x494
     [    2.439220] lr : its_cpu_init+0x2ec/0x494
     [    2.439220] sp : ffff8000123b3ee0
     [    2.439221] x29: ffff8000123b3ee0 x28: 0000000000000000
     [    2.439222] x27: 0000000000000000 x26: 0000000000000000
     [    2.439223] x25: 0000000000000000 x24: ffff800012e40000
     [    2.439224] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.439225] x21: ffff8000117a9000 x20: fffffe0001cb8800
     [    2.439226] x19: ffff8000117db000 x18: 0000000000000000
     [    2.439227] x17: 0000000000000000 x16: 0000000000000000
     [    2.439228] x15: 0000000000000000 x14: 0000000000000000
     [    2.439229] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.439230] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.439231] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.439232] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.439233] x5 : 00000000a0a0a0a0 x4 : ffffa0260deb8000
     [    2.439234] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.439235] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.439236] Call trace:
     [    2.439238]  its_cpu_init+0x2f0/0x494
     [    2.439239]  gic_starting_cpu+0x18/0x24
     [    2.439240]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.439241]  notify_cpu_starting+0x9c/0xb8
     [    2.439243]  secondary_start_kernel+0xdc/0x168
     [    2.439244] ---[ end trace f68728a0d3053b94 ]---
     [    2.439249] GICv3: CPU66: using allocated LPI pending table 
@0x000000007ae20000
     [    2.439272] Xen: initializing cpu66
     [    2.439280] CPU66: Booted secondary processor 0x0000000402 
[0x481fd010]
     [    2.468501] Detected VIPT I-cache on CPU67
     [    2.468602] GICv3: CPU67: found redistributor 403 region 
33:0x00000000aa160000
     [    2.475295] ------------[ cut here ]------------
     [    2.475298] WARNING: CPU: 67 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.475299] Modules linked in:
     [    2.475301] CPU: 67 PID: 0 Comm: swapper/67 Tainted: G W         
5.5.0-rc5 #132
     [    2.475303] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.475304] pc : its_cpu_init+0x2f0/0x494
     [    2.475306] lr : its_cpu_init+0x2ec/0x494
     [    2.475306] sp : ffff8000123bbee0
     [    2.475307] x29: ffff8000123bbee0 x28: 0000000000000000
     [    2.475308] x27: 0000000000000000 x26: 0000000000000000
     [    2.475309] x25: 0000000000000000 x24: ffff800012e60000
     [    2.475310] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.475311] x21: ffff8000117a9000 x20: fffffe0001cb8c00
     [    2.475312] x19: ffff8000117db000 x18: 0000000000000000
     [    2.475313] x17: 0000000000000000 x16: 0000000000000000
     [    2.475314] x15: 0000000000000000 x14: 0000000000000000
     [    2.475315] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.475316] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.475317] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.475318] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.475319] x5 : 00000000a0a0a0a0 x4 : ffffa0260dece000
     [    2.475320] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.475321] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.475322] Call trace:
     [    2.475324]  its_cpu_init+0x2f0/0x494
     [    2.475325]  gic_starting_cpu+0x18/0x24
     [    2.475326]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.475327]  notify_cpu_starting+0x9c/0xb8
     [    2.475329]  secondary_start_kernel+0xdc/0x168
     [    2.475330] ---[ end trace f68728a0d3053b95 ]---
     [    2.475335] GICv3: CPU67: using allocated LPI pending table 
@0x000000007ae30000
     [    2.475358] Xen: initializing cpu67
     [    2.475371] CPU67: Booted secondary processor 0x0000000403 
[0x481fd010]
     [    2.504618] Detected VIPT I-cache on CPU68
     [    2.504727] GICv3: CPU68: found redistributor 404 region 
34:0x00000000aa180000
     [    2.511425] ------------[ cut here ]------------
     [    2.511429] WARNING: CPU: 68 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.511430] Modules linked in:
     [    2.511432] CPU: 68 PID: 0 Comm: swapper/68 Tainted: G W         
5.5.0-rc5 #132
     [    2.511434] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.511435] pc : its_cpu_init+0x2f0/0x494
     [    2.511437] lr : its_cpu_init+0x2ec/0x494
     [    2.511437] sp : ffff80001240bee0
     [    2.511438] x29: ffff80001240bee0 x28: 0000000000000000
     [    2.511440] x27: 0000000000000000 x26: 0000000000000000
     [    2.511441] x25: 0000000000000000 x24: ffff800012ec0000
     [    2.511442] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.511443] x21: ffff8000117a9000 x20: fffffe0001cb9000
     [    2.511444] x19: ffff8000117db000 x18: 0000000000000000
     [    2.511444] x17: 0000000000000000 x16: 0000000000000000
     [    2.511445] x15: 0000000000000000 x14: 0000000000000000
     [    2.511446] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.511447] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.511448] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.511449] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.511450] x5 : 00000000a0a0a0a0 x4 : ffffa0260dee4000
     [    2.511451] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.511452] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.511454] Call trace:
     [    2.511455]  its_cpu_init+0x2f0/0x494
     [    2.511457]  gic_starting_cpu+0x18/0x24
     [    2.511458]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.511459]  notify_cpu_starting+0x9c/0xb8
     [    2.511461]  secondary_start_kernel+0xdc/0x168
     [    2.511462] ---[ end trace f68728a0d3053b96 ]---
     [    2.511467] GICv3: CPU68: using allocated LPI pending table 
@0x000000007ae40000
     [    2.511498] Xen: initializing cpu68
     [    2.511510] CPU68: Booted secondary processor 0x0000000404 
[0x481fd010]
     [    2.540695] Detected VIPT I-cache on CPU69
     [    2.540799] GICv3: CPU69: found redistributor 405 region 
34:0x00000000aa1a0000
     [    2.547490] ------------[ cut here ]------------
     [    2.547493] WARNING: CPU: 69 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.547494] Modules linked in:
     [    2.547496] CPU: 69 PID: 0 Comm: swapper/69 Tainted: G W         
5.5.0-rc5 #132
     [    2.547498] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.547499] pc : its_cpu_init+0x2f0/0x494
     [    2.547501] lr : its_cpu_init+0x2ec/0x494
     [    2.547501] sp : ffff800012413ee0
     [    2.547502] x29: ffff800012413ee0 x28: 0000000000000000
     [    2.547503] x27: 0000000000000000 x26: 0000000000000000
     [    2.547504] x25: 0000000000000000 x24: ffff800012ee0000
     [    2.547505] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.547506] x21: ffff8000117a9000 x20: fffffe0001cb9400
     [    2.547507] x19: ffff8000117db000 x18: 0000000000000000
     [    2.547508] x17: 0000000000000000 x16: 0000000000000000
     [    2.547509] x15: 0000000000000000 x14: 0000000000000000
     [    2.547510] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.547511] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.547512] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.547513] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.547514] x5 : 00000000a0a0a0a0 x4 : ffffa0260defa000
     [    2.547515] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.547516] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.547517] Call trace:
     [    2.547519]  its_cpu_init+0x2f0/0x494
     [    2.547520]  gic_starting_cpu+0x18/0x24
     [    2.547521]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.547523]  notify_cpu_starting+0x9c/0xb8
     [    2.547524]  secondary_start_kernel+0xdc/0x168
     [    2.547525] ---[ end trace f68728a0d3053b97 ]---
     [    2.547531] GICv3: CPU69: using allocated LPI pending table 
@0x000000007ae50000
     [    2.547554] Xen: initializing cpu69
     [    2.547563] CPU69: Booted secondary processor 0x0000000405 
[0x481fd010]
     [    2.576780] Detected VIPT I-cache on CPU70
     [    2.576885] GICv3: CPU70: found redistributor 406 region 
35:0x00000000aa1c0000
     [    2.583578] ------------[ cut here ]------------
     [    2.583581] WARNING: CPU: 70 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.583582] Modules linked in:
     [    2.583584] CPU: 70 PID: 0 Comm: swapper/70 Tainted: G W         
5.5.0-rc5 #132
     [    2.583586] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.583588] pc : its_cpu_init+0x2f0/0x494
     [    2.583589] lr : its_cpu_init+0x2ec/0x494
     [    2.583590] sp : ffff80001241bee0
     [    2.583590] x29: ffff80001241bee0 x28: 0000000000000000
     [    2.583592] x27: 0000000000000000 x26: 0000000000000000
     [    2.583593] x25: 0000000000000000 x24: ffff800012f40000
     [    2.583594] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.583595] x21: ffff8000117a9000 x20: fffffe0001cb9800
     [    2.583596] x19: ffff8000117db000 x18: 0000000000000000
     [    2.583597] x17: 0000000000000000 x16: 0000000000000000
     [    2.583597] x15: 0000000000000000 x14: 0000000000000000
     [    2.583598] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.583600] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.583601] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.583602] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.583603] x5 : 00000000a0a0a0a0 x4 : ffffa0260df10000
     [    2.583604] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.583605] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.583606] Call trace:
     [    2.583608]  its_cpu_init+0x2f0/0x494
     [    2.583609]  gic_starting_cpu+0x18/0x24
     [    2.583610]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.583611]  notify_cpu_starting+0x9c/0xb8
     [    2.583613]  secondary_start_kernel+0xdc/0x168
     [    2.583614] ---[ end trace f68728a0d3053b98 ]---
     [    2.583620] GICv3: CPU70: using allocated LPI pending table 
@0x000000007ae60000
     [    2.583647] Xen: initializing cpu70
     [    2.583657] CPU70: Booted secondary processor 0x0000000406 
[0x481fd010]
     [    2.612869] Detected VIPT I-cache on CPU71
     [    2.612974] GICv3: CPU71: found redistributor 407 region 
35:0x00000000aa1e0000
     [    2.619667] ------------[ cut here ]------------
     [    2.619670] WARNING: CPU: 71 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.619671] Modules linked in:
     [    2.619673] CPU: 71 PID: 0 Comm: swapper/71 Tainted: G W         
5.5.0-rc5 #132
     [    2.619675] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.619676] pc : its_cpu_init+0x2f0/0x494
     [    2.619678] lr : its_cpu_init+0x2ec/0x494
     [    2.619678] sp : ffff800012423ee0
     [    2.619679] x29: ffff800012423ee0 x28: 0000000000000000
     [    2.619680] x27: 0000000000000000 x26: 0000000000000000
     [    2.619681] x25: 0000000000000000 x24: ffff800012f60000
     [    2.619682] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.619683] x21: ffff8000117a9000 x20: fffffe0001cb9c00
     [    2.619684] x19: ffff8000117db000 x18: 0000000000000000
     [    2.619685] x17: 0000000000000000 x16: 0000000000000000
     [    2.619686] x15: 0000000000000000 x14: 0000000000000000
     [    2.619687] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.619688] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.619689] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.619690] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.619691] x5 : 00000000a0a0a0a0 x4 : ffffa0260df26000
     [    2.619692] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.619693] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.619694] Call trace:
     [    2.619696]  its_cpu_init+0x2f0/0x494
     [    2.619697]  gic_starting_cpu+0x18/0x24
     [    2.619698]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.619700]  notify_cpu_starting+0x9c/0xb8
     [    2.619701]  secondary_start_kernel+0xdc/0x168
     [    2.619702] ---[ end trace f68728a0d3053b99 ]---
     [    2.619708] GICv3: CPU71: using allocated LPI pending table 
@0x000000007ae70000
     [    2.619737] Xen: initializing cpu71
     [    2.619747] CPU71: Booted secondary processor 0x0000000407 
[0x481fd010]
     [    2.648961] Detected VIPT I-cache on CPU72
     [    2.649075] GICv3: CPU72: found redistributor 408 region 
36:0x00000000aa200000
     [    2.655773] ------------[ cut here ]------------
     [    2.655777] WARNING: CPU: 72 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.655778] Modules linked in:
     [    2.655781] CPU: 72 PID: 0 Comm: swapper/72 Tainted: G W         
5.5.0-rc5 #132
     [    2.655782] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.655784] pc : its_cpu_init+0x2f0/0x494
     [    2.655785] lr : its_cpu_init+0x2ec/0x494
     [    2.655786] sp : ffff80001242bee0
     [    2.655786] x29: ffff80001242bee0 x28: 0000000000000000
     [    2.655788] x27: 0000000000000000 x26: 0000000000000000
     [    2.655789] x25: 0000000000000000 x24: ffff800012fc0000
     [    2.655790] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.655791] x21: ffff8000117a9000 x20: fffffe0001cba000
     [    2.655792] x19: ffff8000117db000 x18: 0000000000000000
     [    2.655793] x17: 0000000000000000 x16: 0000000000000000
     [    2.655794] x15: 0000000000000000 x14: 0000000000000000
     [    2.655795] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.655796] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.655797] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.655798] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.655799] x5 : 00000000a0a0a0a0 x4 : ffffa0260df3c000
     [    2.655800] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.655801] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.655802] Call trace:
     [    2.655804]  its_cpu_init+0x2f0/0x494
     [    2.655805]  gic_starting_cpu+0x18/0x24
     [    2.655806]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.655808]  notify_cpu_starting+0x9c/0xb8
     [    2.655809]  secondary_start_kernel+0xdc/0x168
     [    2.655810] ---[ end trace f68728a0d3053b9a ]---
     [    2.655817] GICv3: CPU72: using allocated LPI pending table 
@0x000000007ae80000
     [    2.655850] Xen: initializing cpu72
     [    2.655861] CPU72: Booted secondary processor 0x0000000408 
[0x481fd010]
     [    2.685043] Detected VIPT I-cache on CPU73
     [    2.685152] GICv3: CPU73: found redistributor 409 region 
36:0x00000000aa220000
     [    2.691843] ------------[ cut here ]------------
     [    2.691847] WARNING: CPU: 73 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.691847] Modules linked in:
     [    2.691849] CPU: 73 PID: 0 Comm: swapper/73 Tainted: G W         
5.5.0-rc5 #132
     [    2.691851] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.691852] pc : its_cpu_init+0x2f0/0x494
     [    2.691854] lr : its_cpu_init+0x2ec/0x494
     [    2.691854] sp : ffff800012433ee0
     [    2.691855] x29: ffff800012433ee0 x28: 0000000000000000
     [    2.691856] x27: 0000000000000000 x26: 0000000000000000
     [    2.691857] x25: 0000000000000000 x24: ffff800012fe0000
     [    2.691858] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.691859] x21: ffff8000117a9000 x20: fffffe0001cba400
     [    2.691860] x19: ffff8000117db000 x18: 0000000000000000
     [    2.691861] x17: 0000000000000000 x16: 0000000000000000
     [    2.691862] x15: 0000000000000000 x14: 0000000000000000
     [    2.691863] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.691864] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.691865] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.691866] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.691867] x5 : 00000000a0a0a0a0 x4 : ffffa0260df52000
     [    2.691868] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.691869] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.691870] Call trace:
     [    2.691872]  its_cpu_init+0x2f0/0x494
     [    2.691873]  gic_starting_cpu+0x18/0x24
     [    2.691874]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.691876]  notify_cpu_starting+0x9c/0xb8
     [    2.691877]  secondary_start_kernel+0xdc/0x168
     [    2.691878] ---[ end trace f68728a0d3053b9b ]---
     [    2.691883] GICv3: CPU73: using allocated LPI pending table 
@0x000000007ae90000
     [    2.691913] Xen: initializing cpu73
     [    2.691924] CPU73: Booted secondary processor 0x0000000409 
[0x481fd010]
     [    2.721132] Detected VIPT I-cache on CPU74
     [    2.721242] GICv3: CPU74: found redistributor 40a region 
37:0x00000000aa240000
     [    2.727934] ------------[ cut here ]------------
     [    2.727937] WARNING: CPU: 74 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.727938] Modules linked in:
     [    2.727940] CPU: 74 PID: 0 Comm: swapper/74 Tainted: G W         
5.5.0-rc5 #132
     [    2.727941] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.727943] pc : its_cpu_init+0x2f0/0x494
     [    2.727945] lr : its_cpu_init+0x2ec/0x494
     [    2.727945] sp : ffff80001248bee0
     [    2.727946] x29: ffff80001248bee0 x28: 0000000000000000
     [    2.727947] x27: 0000000000000000 x26: 0000000000000000
     [    2.727948] x25: 0000000000000000 x24: ffff800013040000
     [    2.727949] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.727950] x21: ffff8000117a9000 x20: fffffe0001cba800
     [    2.727951] x19: ffff8000117db000 x18: 0000000000000000
     [    2.727952] x17: 0000000000000000 x16: 0000000000000000
     [    2.727953] x15: 0000000000000000 x14: 0000000000000000
     [    2.727954] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.727955] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.727956] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.727957] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.727958] x5 : 00000000a0a0a0a0 x4 : ffffa0260df68000
     [    2.727959] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.727960] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.727961] Call trace:
     [    2.727963]  its_cpu_init+0x2f0/0x494
     [    2.727964]  gic_starting_cpu+0x18/0x24
     [    2.727965]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.727966]  notify_cpu_starting+0x9c/0xb8
     [    2.727968]  secondary_start_kernel+0xdc/0x168
     [    2.727969] ---[ end trace f68728a0d3053b9c ]---
     [    2.727974] GICv3: CPU74: using allocated LPI pending table 
@0x000000007aea0000
     [    2.727996] Xen: initializing cpu74
     [    2.728006] CPU74: Booted secondary processor 0x000000040a 
[0x481fd010]
     [    2.757219] Detected VIPT I-cache on CPU75
     [    2.757330] GICv3: CPU75: found redistributor 40b region 
37:0x00000000aa260000
     [    2.764022] ------------[ cut here ]------------
     [    2.764026] WARNING: CPU: 75 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.764026] Modules linked in:
     [    2.764028] CPU: 75 PID: 0 Comm: swapper/75 Tainted: G W         
5.5.0-rc5 #132
     [    2.764029] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.764031] pc : its_cpu_init+0x2f0/0x494
     [    2.764033] lr : its_cpu_init+0x2ec/0x494
     [    2.764033] sp : ffff800012493ee0
     [    2.764034] x29: ffff800012493ee0 x28: 0000000000000000
     [    2.764035] x27: 0000000000000000 x26: 0000000000000000
     [    2.764036] x25: 0000000000000000 x24: ffff800013060000
     [    2.764037] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.764038] x21: ffff8000117a9000 x20: fffffe0001cbac00
     [    2.764039] x19: ffff8000117db000 x18: 0000000000000000
     [    2.764040] x17: 0000000000000000 x16: 0000000000000000
     [    2.764041] x15: 0000000000000000 x14: 0000000000000000
     [    2.764042] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.764042] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.764044] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.764044] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.764045] x5 : 00000000a0a0a0a0 x4 : ffffa0260df7e000
     [    2.764047] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.764048] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.764049] Call trace:
     [    2.764050]  its_cpu_init+0x2f0/0x494
     [    2.764051]  gic_starting_cpu+0x18/0x24
     [    2.764053]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.764054]  notify_cpu_starting+0x9c/0xb8
     [    2.764055]  secondary_start_kernel+0xdc/0x168
     [    2.764056] ---[ end trace f68728a0d3053b9d ]---
     [    2.764062] GICv3: CPU75: using allocated LPI pending table 
@0x000000007aeb0000
     [    2.764083] Xen: initializing cpu75
     [    2.764092] CPU75: Booted secondary processor 0x000000040b 
[0x481fd010]
     [    2.793316] Detected VIPT I-cache on CPU76
     [    2.793433] GICv3: CPU76: found redistributor 40c region 
38:0x00000000aa280000
     [    2.800131] ------------[ cut here ]------------
     [    2.800136] WARNING: CPU: 76 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.800136] Modules linked in:
     [    2.800139] CPU: 76 PID: 0 Comm: swapper/76 Tainted: G W         
5.5.0-rc5 #132
     [    2.800140] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.800142] pc : its_cpu_init+0x2f0/0x494
     [    2.800143] lr : its_cpu_init+0x2ec/0x494
     [    2.800144] sp : ffff80001249bee0
     [    2.800144] x29: ffff80001249bee0 x28: 0000000000000000
     [    2.800146] x27: 0000000000000000 x26: 0000000000000000
     [    2.800147] x25: 0000000000000000 x24: ffff8000130c0000
     [    2.800148] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.800149] x21: ffff8000117a9000 x20: fffffe0001cbb000
     [    2.800150] x19: ffff8000117db000 x18: 0000000000000000
     [    2.800151] x17: 0000000000000000 x16: 0000000000000000
     [    2.800152] x15: 0000000000000000 x14: 0000000000000000
     [    2.800152] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.800153] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.800154] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.800155] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.800156] x5 : 00000000a0a0a0a0 x4 : ffffa0260df94000
     [    2.800157] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.800158] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.800159] Call trace:
     [    2.800161]  its_cpu_init+0x2f0/0x494
     [    2.800162]  gic_starting_cpu+0x18/0x24
     [    2.800163]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.800165]  notify_cpu_starting+0x9c/0xb8
     [    2.800166]  secondary_start_kernel+0xdc/0x168
     [    2.800167] ---[ end trace f68728a0d3053b9e ]---
     [    2.800172] GICv3: CPU76: using allocated LPI pending table 
@0x000000007aec0000
     [    2.800198] Xen: initializing cpu76
     [    2.800210] CPU76: Booted secondary processor 0x000000040c 
[0x481fd010]
     [    2.829396] Detected VIPT I-cache on CPU77
     [    2.829510] GICv3: CPU77: found redistributor 40d region 
38:0x00000000aa2a0000
     [    2.836202] ------------[ cut here ]------------
     [    2.836205] WARNING: CPU: 77 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.836206] Modules linked in:
     [    2.836208] CPU: 77 PID: 0 Comm: swapper/77 Tainted: G W         
5.5.0-rc5 #132
     [    2.836210] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.836212] pc : its_cpu_init+0x2f0/0x494
     [    2.836213] lr : its_cpu_init+0x2ec/0x494
     [    2.836214] sp : ffff8000124a3ee0
     [    2.836214] x29: ffff8000124a3ee0 x28: 0000000000000000
     [    2.836215] x27: 0000000000000000 x26: 0000000000000000
     [    2.836216] x25: 0000000000000000 x24: ffff8000130e0000
     [    2.836218] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.836219] x21: ffff8000117a9000 x20: fffffe0001cbb400
     [    2.836220] x19: ffff8000117db000 x18: 0000000000000000
     [    2.836221] x17: 0000000000000000 x16: 0000000000000000
     [    2.836222] x15: 0000000000000000 x14: 0000000000000000
     [    2.836223] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.836224] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.836225] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.836226] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.836227] x5 : 00000000a0a0a0a0 x4 : ffffa0260dfaa000
     [    2.836227] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.836228] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.836230] Call trace:
     [    2.836231]  its_cpu_init+0x2f0/0x494
     [    2.836232]  gic_starting_cpu+0x18/0x24
     [    2.836234]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.836235]  notify_cpu_starting+0x9c/0xb8
     [    2.836236]  secondary_start_kernel+0xdc/0x168
     [    2.836237] ---[ end trace f68728a0d305 cpu77
     [    2.836274] CPU77: Booted secondary processor 0x000000040d 
[0x481fd010]
     [    2.865498] Detected VIPT I-cache on CPU78
     [    2.865613] GICv3: CPU78: found redistributor 40e region 
39:0x00000000aa2c0000
     [    2.872305] ------------[ cut here ]------------
     [    2.872308] WARNING: CPU: 78 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.872309] Modules linked in:
     [    2.872311] CPU: 78 PID: 0 Comm: swapper/78 Tainted: G W         
5.5.0-rc5 #132
     [    2.872313] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.872314] pc : its_cpu_init+0x2f0/0x494
     [    2.872316] lr : its_cpu_init+0x2ec/0x494
     [    2.872316] sp : ffff8000124abee0
     [    2.872317] x29: ffff8000124abee0 x28: 0000000000000000
     [    2.872318] x27: 0000000000000000 x26: 0000000000000000
     [    2.872319] x25: 0000000000000000 x24: ffff800013140000
     [    2.872320] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.872321] x21: ffff8000117a9000 x20: fffffe0001cbb800
     [    2.872322] x19: ffff8000117db000 x18: 0000000000000000
     [    2.872323] x17: 0000000000000000 x16: 0000000000000000
     [    2.872324] x15: 0000000000000000 x14: 0000000000000000
     [    2.872325] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.872326] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.872327] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.872328] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.872329] x5 : 00000000a0a0a0a0 x4 : ffffa0260dfc0000
     [    2.872330] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.872331] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.872332] Call trace:
     [    2.872333]  its_cpu_init+0x2f0/0x494
     [    2.872334]  gic_starting_cpu+0x18/0x24
     [    2.872336]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.872337]  notify_cpu_starting+0x9c/0xb8
     [    2.872338]  secondary_start_kernel+0xdc/0x168
     [    2.872339] ---[ end trace f68728a0d3053ba0 ]---
     [    2.872344] GICv3: CPU78: using allocated LPI pending table 
@0x000000007aee0000
     [    2.872366] Xen: initializing cpu78
     [    2.872375] CPU78: Booted secondary processor 0x000000040e 
[0x481fd010]
     [    2.901575] Detected VIPT I-cache on CPU79
     [    2.901691] GICv3: CPU79: found redistributor 40f region 
39:0x00000000aa2e0000
     [    2.908382] ------------[ cut here ]------------
     [    2.908386] WARNING: CPU: 79 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.908386] Modules linked in:
     [    2.908388] CPU: 79 PID: 0 Comm: swapper/79 Tainted: G W         
5.5.0-rc5 #132
     [    2.908389] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.908391] pc : its_cpu_init+0x2f0/0x494
     [    2.908393] lr : its_cpu_init+0x2ec/0x494
     [    2.908393] sp : ffff8000124b3ee0
     [    2.908394] x29: ffff8000124b3ee0 x28: 0000000000000000
     [    2.908395] x27: 0000000000000000 x26: 0000000000000000
     [    2.908396] x25: 0000000000000000 x24: ffff800013160000
     [    2.908397] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.908398] x21: ffff8000117a9000 x20: fffffe0001cbbc00
     [    2.908399] x19: ffff8000117db000 x18: 0000000000000000
     [    2.908400] x17: 0000000000000000 x16: 0000000000000000
     [    2.908401] x15: 0000000000000000 x14: 0000000000000000
     [    2.908402] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.908403] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.908404] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.908405] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.908406] x5 : 00000000a0a0a0a0 x4 : ffffa0260dfd6000
     [    2.908407] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.908408] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.908409] Call trace:
     [    2.908410]  its_cpu_init+0x2f0/0x494
     [    2.908412]  gic_starting_cpu+0x18/0x24
     [    2.908413]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.908414]  notify_cpu_starting+0x9c/0xb8
     [    2.908416]  secondary_start_kernel+0xdc/0x168
     [    2.908416] ---[ end trace f68728a0d3053ba1 ]---
     [    2.908422] GICv3: CPU79: using allocated LPI pending table 
@0x000000007aef0000
     [    2.908443] Xen: initializing cpu79
     [    2.908452] CPU79: Booted secondary processor 0x000000040f 
[0x481fd010]
     [    2.937665] Detected VIPT I-cache on CPU80
     [    2.937792] GICv3: CPU80: found redistributor 500 region 
40:0x00000000aa300000
     [    2.944491] ------------[ cut here ]------------
     [    2.944495] WARNING: CPU: 80 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.944496] Modules linked in:
     [    2.944499] CPU: 80 PID: 0 Comm: swapper/80 Tainted: G W         
5.5.0-rc5 #132
     [    2.944500] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.944502] pc : its_cpu_init+0x2f0/0x494
     [    2.944503] lr : its_cpu_init+0x2ec/0x494
     [    2.944504] sp : ffff8000124bbee0
     [    2.944504] x29: ffff8000124bbee0 x28: 0000000000000000
     [    2.944506] x27: 0000000000000000 x26: 0000000000000000
     [    2.944507] x25: 0000000000000000 x24: ffff8000131c0000
     [    2.944508] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.944509] x21: ffff8000117a9000 x20: fffffe0001cbc000
     [    2.944510] x19: ffff8000117db000 x18: 0000000000000000
     [    2.944511] x17: 0000000000000000 x16: 0000000000000000
     [    2.944512] x15: 0000000000000000 x14: 0000000000000000
     [    2.944512] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.944513] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.944514] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.944515] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.944516] x5 : 00000000a0a0a0a0 x4 : ffffa0260dfec000
     [    2.944517] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.944518] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.944520] Call trace:
     [    2.944521]  its_cpu_init+0x2f0/0x494
     [    2.944523]  gic_starting_cpu+0x18/0x24
     [    2.944524]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.944525]  notify_cpu_starting+0x9c/0xb8
     [    2.944527]  secondary_start_kernel+0xdc/0x168
     [    2.944528] ---[ end trace f68728a0d3053ba2 ]---
     [    2.944533] GICv3: CPU80: using allocated LPI pending table 
@0x000000007af00000
     [    2.944558] Xen: initializing cpu80
     [    2.944569] CPU80: Booted secondary processor 0x0000000500 
[0x481fd010]
     [    2.973750] Detected VIPT I-cache on CPU81
     [    2.973872] GICv3: CPU81: found redistributor 501 region 
40:0x00000000aa320000
     [    2.980565] ------------[ cut here ]------------
     [    2.980568] WARNING: CPU: 81 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    2.980569] Modules linked in:
     [    2.980571] CPU: 81 PID: 0 Comm: swapper/81 Tainted: G W         
5.5.0-rc5 #132
     [    2.980573] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    2.980574] pc : its_cpu_init+0x2f0/0x494
     [    2.980576] lr : its_cpu_init+0x2ec/0x494
     [    2.980576] sp : ffff80001250bee0
     [    2.980577] x29: ffff80001250bee0 x28: 0000000000000000
     [    2.980578] x27: 0000000000000000 x26: 0000000000000000
     [    2.980579] x25: 0000000000000000 x24: ffff8000131e0000
     [    2.980580] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    2.980581] x21: ffff8000117a9000 x20: fffffe0001cbc400
     [    2.980582] x19: ffff8000117db000 x18: 0000000000000000
     [    2.980583] x17: 0000000000000000 x16: 0000000000000000
     [    2.980584] x15: 0000000000000000 x14: 0000000000000000
     [    2.980585] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    2.980586] x11: ffffffffffffffff x10: ffff8000119916a0
     [    2.980587] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    2.980588] x7 : 0000000000000000 x6 : 0000000000000070
     [    2.980589] x5 : 00000000a0a0a0a0 x4 : ffffa0260e002000
     [    2.980590] x3 : 000000000000003d x2 : ffffffffffffffff
     [    2.980591] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    2.980592] Call trace:
     [    2.980594]  its_cpu_init+0x2f0/0x494
     [    2.980595]  gic_starting_cpu+0x18/0x24
     [    2.980597]  cpuhp_invoke_callback+0x84/0x1e0
     [    2.980598]  notify_cpu_starting+0x9c/0xb8
     [    2.980599]  secondary_start_kernel+0xdc/0x168
     [    2.980600] ---[ end trace f68728a0d3053ba3 ]---
     [    2.980605] GICv3: CPU81: using allocated LPI pending table 
@0x000000007af10000
     [    2.980627] Xen: initializing cpu81
     [    2.980636] CPU81: Booted secondary processor 0x0000000501 
[0x481fd010]
     [    3.009836] Detected VIPT I-cache on CPU82
     [    3.009959] GICv3: CPU82: found redistributor 502 region 
41:0x00000000aa340000
     [    3.016651] ------------[ cut here ]------------
     [    3.016654] WARNING: CPU: 82 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.016655] Modules linked in:
     [    3.016657] CPU: 82 PID: 0 Comm: swapper/82 Tainted: G W         
5.5.0-rc5 #132
     [    3.016659] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.016660] pc : its_cpu_init+0x2f0/0x494
     [    3.016662] lr : its_cpu_init+0x2ec/0x494
     [    3.016662] sp : ffff800012513ee0
     [    3.016663] x29: ffff800012513ee0 x28: 0000000000000000
     [    3.016664] x27: 0000000000000000 x26: 0000000000000000
     [    3.016665] x25: 0000000000000000 x24: ffff800013240000
     [    3.016666] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.016668] x21: ffff8000117a9000 x20: fffffe0001cbc800
     [    3.016669] x19: ffff8000117db000 x18: 0000000000000000
     [    3.016670] x17: 0000000000000000 x16: 0000000000000000
     [    3.016671] x15: 0000000000000000 x14: 0000000000000000
     [    3.016671] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.016672] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.016673] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.016674] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.016675] x5 : 00000000a0a0a0a0 x4 : ffffa0260e018000
     [    3.016676] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.016677] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.016678] Call trace:
     [    3.016680]  its_cpu_init+0x2f0/0x494
     [    3.016681]  gic_starting_cpu+0x18/0x24
     [    3.016683]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.016684]  notify_cpu_starting+0x9c/0xb8
     [    3.016685]  secondary_start_kernel+0xdc/0x168
     [    3.016686] ---[ end trace f68728a0d3053ba4 ]---
     [    3.016691] GICv3: CPU82: using allocated LPI pending table 
@0x000000007af20000
     [    3.016713] Xen: initializing cpu82
     [    3.016723] CPU82: Booted secondary processor 0x0000000502 
[0x481fd010]
     [    3.045924] Detected VIPT I-cache on CPU83
     [    3.046047] GICv3: CPU83: found redistributor 503 region 
41:0x00000000aa360000
     [    3.052739] ------------[ cut here ]------------
     [    3.052743] WARNING: CPU: 83 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.052743] Modules linked in:
     [    3.052746] CPU: 83 PID: 0 Comm: swapper/83 Tainted: G W         
5.5.0-rc5 #132
     [    3.052747] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.052749] pc : its_cpu_init+0x2f0/0x494
     [    3.052750] lr : its_cpu_init+0x2ec/0x494
     [    3.052751] sp : ffff80001251bee0
     [    3.052751] x29: ffff80001251bee0 x28: 0000000000000000
     [    3.052752] x27: 0000000000000000 x26: 0000000000000000
     [    3.052753] x25: 0000000000000000 x24: ffff800013260000
     [    3.052754] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.052755] x21: ffff8000117a9000 x20: fffffe0001cbcc00
     [    3.052756] x19: ffff8000117db000 x18: 0000000000000000
     [    3.052758] x17: 0000000000000000 x16: 0000000000000000
     [    3.052758] x15: 0000000000000000 x14: 0000000000000000
     [    3.052759] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.052760] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.052761] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.052762] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.052763] x5 : 00000000a0a0a0a0 x4 : ffffa0260e02e000
     [    3.052764] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.052765] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.052766] Call trace:
     [    3.052768]  its_cpu_init+0x2f0/0x494
     [    3.052769]  gic_starting_cpu+0x18/0x24
     [    3.052770]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.052772]  notify_cpu_starting+0x9c/0xb8
     [    3.052773]  secondary_start_kernel+0xdc/0x168
     [    3.052774] ---[ end trace f68728a0d3053ba5 ]---
     [    3.052779] GICv3: CPU83: using allocated LPI pending table 
@0x000000007af30000
     [    3.052804] Xen: initializing cpu83
     [    3.052815] CPU83: Booted secondary processor 0x0000000503 
[0x481fd010]
     [    3.082005] Detected VIPT I-cache on CPU84
     [    3.082136] GICv3: CPU84: found redistributor 504 region 
42:0x00000000aa380000
     [    3.088835] ------------[ cut here ]------------
     [    3.088839] WARNING: CPU: 84 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.088840] Modules linked in:
     [    3.088843] CPU: 84 PID: 0 Comm: swapper/84 Tainted: G W         
5.5.0-rc5 #132
     [    3.088844] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.088846] pc : its_cpu_init+0x2f0/0x494
     [    3.088847] lr : its_cpu_init+0x2ec/0x494
     [    3.088848] sp : ffff800012523ee0
     [    3.088849] x29: ffff800012523ee0 x28: 0000000000000000
     [    3.088850] x27: 0000000000000000 x26: 0000000000000000
     [    3.088851] x25: 0000000000000000 x24: ffff8000132c0000
     [    3.088852] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.088853] x21: ffff8000117a9000 x20: fffffe0001cbd000
     [    3.088854] x19: ffff8000117db000 x18: 0000000000000000
     [    3.088855] x17: 0000000000000000 x16: 0000000000000000
     [    3.088856] x15: 0000000000000000 x14: 0000000000000000
     [    3.088857] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.088858] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.088859] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.088860] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.088861] x5 : 00000000a0a0a0a0 x4 : ffffa0260e044000
     [    3.088862] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.088863] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.088865] Call trace:
     [    3.088866]  its_cpu_init+0x2f0/0x494
     [    3.088868]  gic_starting_cpu+0x18/0x24
     [    3.088869]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.088870]  notify_cpu_starting+0x9c/0xb8
     [    3.088872]  secondary_start_kernel+0xdc/0x168
     [    3.088873] ---[ end trace f68728a0d3053ba6 ]---
     [    3.088879] GICv3: CPU84: using allocated LPI pending table 
@0x000000007af40000
     [    3.088905] Xen: initializing cpu84
     [    3.088916] CPU84: Booted secondary processor 0x0000000504 
[0x481fd010]
     [    3.118070] Detected VIPT I-cache on CPU85
     [    3.118194] GICv3: CPU85: found redistributor 505 region 
42:0x00000000aa3a0000
     [    3.124886] ------------[ cut here ]------------
     [    3.124889] WARNING: CPU: 85 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.124890] Modules linked in:
     [    3.124892] CPU: 85 PID: 0 Comm: swapper/85 Tainted: G W         
5.5.0-rc5 #132
     [    3.124894] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.124895] pc : its_cpu_init+0x2f0/0x494
     [    3.124897] lr : its_cpu_init+0x2ec/0x494
     [    3.124897] sp : ffff80001252bee0
     [    3.124898] x29: ffff80001252bee0 x28: 0000000000000000
     [    3.124899] x27: 0000000000000000 x26: 0000000000000000
     [    3.124900] x25: 0000000000000000 x24: ffff8000132e0000
     [    3.124901] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.124902] x21: ffff8000117a9000 x20: fffffe0001cbd400
     [    3.124903] x19: ffff8000117db000 x18: 0000000000000000
     [    3.124904] x17: 0000000000000000 x16: 0000000000000000
     [    3.124905] x15: 0000000000000000 x14: 0000000000000000
     [    3.124906] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.124907] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.124908] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.124908] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.124909] x5 : 00000000a0a0a0a0 x4 : ffffa0260e05a000
     [    3.124910] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.124911] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.124913] Call trace:
     [    3.124914]  its_cpu_init+0x2f0/0x494
     [    3.124916]  gic_starting_cpu+0x18/0x24
     [    3.124917]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.124918]  notify_cpu_starting+0x9c/0xb8
     [    3.124920]  secondary_start_kernel+0xdc/0x168
     [    3.124921] ---[ end trace f68728a0d3053ba7 ]---
     [    3.124926] GICv3: CPU85: using allocated LPI pending table 
@0x000000007af50000
     [    3.124953] Xen: initializing cpu85
     [    3.124962] CPU85: Booted secondary processor 0x0000000505 
[0x481fd010]
     [    3.154142] Detected VIPT I-cache on CPU86
     [    3.154267] GICv3: CPU86: found redistributor 506 region 
43:0x00000000aa3c0000
     [    3.160958] ------------[ cut here ]------------
     [    3.160962] WARNING: CPU: 86 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.160962] Modules linked in:
     [    3.160964] CPU: 86 PID: 0 Comm: swapper/86 Tainted: G W         
5.5.0-rc5 #132
     [    3.160966] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.160967] pc : its_cpu_init+0x2f0/0x494
     [    3.160969] lr : its_cpu_init+0x2ec/0x494
     [    3.160969] sp : ffff800012533ee0
     [    3.160970] x29: ffff800012533ee0 x28: 0000000000000000
     [    3.160971] x27: 0000000000000000 x26: 0000000000000000
     [    3.160972] x25: 0000000000000000 x24: ffff800013340000
     [    3.160973] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.160974] x21: ffff8000117a9000 x20: fffffe0001cbd800
     [    3.160975] x19: ffff8000117db000 x18: 0000000000000000
     [    3.160976] x17: 0000000000000000 x16: 0000000000000000
     [    3.160977] x15: 0000000000000000 x14: 0000000000000000
     [    3.160978] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.160979] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.160980] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.160981] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.160982] x5 : 00000000a0a0a0a0 x4 : ffffa0260e070000
     [    3.160983] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.160984] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.160985] Call trace:
     [    3.160987]  its_cpu_init+0x2f0/0x494
     [    3.160988]  gic_starting_cpu+0x18/0x24
     [    3.160989]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.160990]  notify_cpu_starting+0x9c/0xb8
     [    3.160992]  secondary_start_kernel+0xdc/0x168
     [    3.160993] ---[ end trace f68728a0d3053ba8 ]---
     [    3.160998] GICv3: CPU86: using allocated LPI pending table 
@0x000000007af60000
     [    3.161022] Xen: initializing cpu86
     [    3.161032] CPU86: Booted secondary processor 0x0000000506 
[0x481fd010]
     [    3.190213] Detected VIPT I-cache on CPU87
     [    3.190339] GICv3: CPU87: found redistributor 507 region 
43:0x00000000aa3e0000
     [    3.197031] ------------[ cut here ]------------
     [    3.197035] WARNING: CPU: 87 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.197035] Modules linked in:
     [    3.197038] CPU: 87 PID: 0 Comm: swapper/87 Tainted: G W         
5.5.0-rc5 #132
     [    3.197039] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.197040] pc : its_cpu_init+0x2f0/0x494
     [    3.197042] lr : its_cpu_init+0x2ec/0x494
     [    3.197042] sp : ffff80001258bee0
     [    3.197043] x29: ffff80001258bee0 x28: 0000000000000000
     [    3.197044] x27: 0000000000000000 x26: 0000000000000000
     [    3.197045] x25: 0000000000000000 x24: ffff800013360000
     [    3.197046] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.197048] x21: ffff8000117a9000 x20: fffffe0001cbdc00
     [    3.197049] x19: ffff8000117db000 x18: 0000000000000000
     [    3.197050] x17: 0000000000000000 x16: 0000000000000000
     [    3.197050] x15: 0000000000000000 x14: 0000000000000000
     [    3.197051] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.197052] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.197053] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.197054] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.197055] x5 : 00000000a0a0a0a0 x4 : ffffa0260e086000
     [    3.197056] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.197057] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.197058] Call trace:
     [    3.197060]  its_cpu_init+0x2f0/0x494
     [    3.197061]  gic_starting_cpu+0x18/0x24
     [    3.197062]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.197064]  notify_cpu_starting+0x9c/0xb8
     [    3.197065]  secondary_start_kernel+0xdc/0x168
     [    3.197066] ---[ end trace f68728a0d3053ba9 ]---
     [    3.197071] GICv3: CPU87: using allocated LPI pending table 
@0x000000007af70000
     [    3.197094] Xen: initializing cpu87
     [    3.197104] CPU87: Booted secondary processor 0x0000000507 
[0x481fd010]
     [    3.226289] Detected VIPT I-cache on CPU88
     [    3.226423] GICv3: CPU88: found redistributor 508 region 
44:0x00000000aa400000
     [    3.233124] ------------[ cut here ]------------
     [    3.233128] WARNING: CPU: 88 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.233129] Modules linked in:
     [    3.233132] CPU: 88 PID: 0 Comm: swapper/88 Tainted: G W         
5.5.0-rc5 #132
     [    3.233133] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.233135] pc : its_cpu_init+0x2f0/0x494
     [    3.233136] lr : its_cpu_init+0x2ec/0x494
     [    3.233137] sp : ffff800012593ee0
     [    3.233137] x29: ffff800012593ee0 x28: 0000000000000000
     [    3.233139] x27: 0000000000000000 x26: 0000000000000000
     [    3.233140] x25: 0000000000000000 x24: ffff8000133c0000
     [    3.233141] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.233142] x21: ffff8000117a9000 x20: fffffe0001cbe000
     [    3.233143] x19: ffff8000117db000 x18: 0000000000000000
     [    3.233144] x17: 0000000000000000 x16: 0000000000000000
     [    3.233145] x15: 0000000000000000 x14: 0000000000000000
     [    3.233146] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.233147] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.233148] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.233149] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.233150] x5 : 00000000a0a0a0a0 x4 : ffffa0260e09c000
     [    3.233151] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.233151] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.233153] Call trace:
     [    3.233154]  its_cpu_init+0x2f0/0x494
     [    3.233156]  gic_starting_cpu+0x18/0x24
     [    3.233157]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.233158]  notify_cpu_starting+0x9c/0xb8
     [    3.233160]  secondary_start_kernel+0xdc/0x168
     [    3.233161] ---[ end trace f68728a0d3053baa ]---
     [    3.233166] GICv3: CPU88: using allocated LPI pending table 
@0x000000007af80000
     [    3.233191] Xen: initializing cpu88
     [    3.233203] CPU88: Booted secondary processor 0x0000000508 
[0x481fd010]
     [    3.262353] Detected VIPT I-cache on CPU89
     [    3.262483] GICv3: CPU89: found redistributor 509 region 
44:0x00000000aa420000
     [    3.269175] ------------[ cut here ]------------
     [    3.269178] WARNING: CPU: 89 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.269179] Modules linked in:
     [    3.269181] CPU: 89 PID: 0 Comm: swapper/89 Tainted: G W         
5.5.0-rc5 #132
     [    3.269183] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.269184] pc : its_cpu_init+0x2f0/0x494
     [    3.269186] lr : its_cpu_init+0x2ec/0x494
     [    3.269186] sp : ffff80001259bee0
     [    3.269187] x29: ffff80001259bee0 x28: 0000000000000000
     [    3.269188] x27: 0000000000000000 x26: 0000000000000000
     [    3.269189] x25: 0000000000000000 x24: ffff8000133e0000
     [    3.269190] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.269191] x21: ffff8000117a9000 x20: fffffe0001cbe400
     [    3.269192] x19: ffff8000117db000 x18: 0000000000000000
     [    3.269193] x17: 0000000000000000 x16: 0000000000000000
     [    3.269194] x15: 0000000000000000 x14: 0000000000000000
     [    3.269195] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.269196] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.269197] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.269198] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.269199] x5 : 00000000a0a0a0a0 x4 : ffffa0260e0b2000
     [    3.269200] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.269201] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.269202] Call trace:
     [    3.269204]  its_cpu_init+0x2f0/0x494
     [    3.269205]  gic_starting_cpu+0x18/0x24
     [    3.269206]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.269208]  notify_cpu_starting+0x9c/0xb8
     [    3.269209]  secondary_start_kernel+0xdc/0x168
     [    3.269210] ---[ end trace f68728a0d3053bab ]---
     [    3.269216] GICv3: CPU89: using allocated LPI pending table 
@0x000000007af90000
     [    3.269240] Xen: initializing cpu89
     [    3.269251] CPU89: Booted secondary processor 0x0000000509 
[0x481fd010]
     [    3.298424] Detected VIPT I-cache on CPU90
     [    3.298555] GICv3: CPU90: found redistributor 50a region 
45:0x00000000aa440000
     [    3.305248] ------------[ cut here ]------------
     [    3.305251] WARNING: CPU: 90 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.305252] Modules linked in:
     [    3.305254] CPU: 90 PID: 0 Comm: swapper/90 Tainted: G W         
5.5.0-rc5 #132
     [    3.305256] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.305257] pc : its_cpu_init+0x2f0/0x494
     [    3.305259] lr : its_cpu_init+0x2ec/0x494
     [    3.305259] sp : ffff8000125a3ee0
     [    3.305260] x29: ffff8000125a3ee0 x28: 0000000000000000
     [    3.305261] x27: 0000000000000000 x26: 0000000000000000
     [    3.305262] x25: 0000000000000000 x24: ffff800013440000
     [    3.305263] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.305264] x21: ffff8000117a9000 x20: fffffe0001cbe800
     [    3.305265] x19: ffff8000117db000 x18: 0000000000000000
     [    3.305266] x17: 0000000000000000 x16: 0000000000000000
     [    3.305267] x15: 0000000000000000 x14: 0000000000000000
     [    3.305268] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.305269] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.305270] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.305271] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.305272] x5 : 00000000a0a0a0a0 x4 : ffffa0260e0c8000
     [    3.305273] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.305274] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.305275] Call trace:
     [    3.305277]  its_cpu_init+0x2f0/0x494
     [    3.305278]  gic_starting_cpu+0x18/0x24
     [    3.305279]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.305281]  notify_cpu_starting+0x9c/0xb8
     [    3.305282]  secondary_start_kernel+0xdc/0x168
     [    3.305283] ---[ end trace f68728a0d3053bac ]---
     [    3.305288] GICv3: CPU90: using allocated LPI pending table 
@0x000000007afa0000
     [    3.305313] Xen: initializing cpu90
     [    3.305325] CPU90: Booted secondary processor 0x000000050a 
[0x481fd010]
     [    3.334495] Detected VIPT I-cache on CPU91
     [    3.334628] GICv3: CPU91: found redistributor 50b region 
45:0x00000000aa460000
     [    3.341321] ------------[ cut here ]------------
     [    3.341325] WARNING: CPU: 91 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.341325] Modules linked in:
     [    3.341328] CPU: 91 PID: 0 Comm: swapper/91 Tainted: G W         
5.5.0-rc5 #132
     [    3.341329] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.341331] pc : its_cpu_init+0x2f0/0x494
     [    3.341332] lr : its_cpu_init+0x2ec/0x494
     [    3.341333] sp : ffff8000125abee0
     [    3.341333] x29: ffff8000125abee0 x28: 0000000000000000
     [    3.341335] x27: 0000000000000000 x26: 0000000000000000
     [    3.341336] x25: 0000000000000000 x24: ffff800013460000
     [    3.341337] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.341338] x21: ffff8000117a9000 x20: fffffe0001cbec00
     [    3.341339] x19: ffff8000117db000 x18: 0000000000000000
     [    3.341339] x17: 0000000000000000 x16: 0000000000000000
     [    3.341340] x15: 0000000000000000 x14: 0000000000000000
     [    3.341341] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.341342] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.341343] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.341344] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.341345] x5 : 00000000a0a0a0a0 x4 : ffffa0260e0de000
     [    3.341346] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.341347] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.341349] Call trace:
     [    3.341350]  its_cpu_init+0x2f0/0x494
     [    3.341351]  gic_starting_cpu+0x18/0x24
     [    3.341353]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.341354]  notify_cpu_starting+0x9c/0xb8
     [    3.341356]  secondary_start_kernel+0xdc/0x168
     [    3.341356] ---[ end trace f68728a0d3053bad ]---
     [    3.341362] GICv3: CPU91: using allocated LPI pending table 
@0x000000007afb0000
     [    3.341384] Xen: initializing cpu91
     [    3.341395] CPU91: Booted secondary processor 0x000000050b 
[0x481fd010]
     [    3.370570] Detected VIPT I-cache on CPU92
     [    3.370711] GICv3: CPU92: found redistributor 50c region 
46:0x00000000aa480000
     [    3.377410] ------------[ cut here ]------------
     [    3.377414] WARNING: CPU: 92 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.377415] Modules linked in:
     [    3.377418] CPU: 92 PID: 0 Comm: swapper/92 Tainted: G W         
5.5.0-rc5 #132
     [    3.377419] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.377421] pc : its_cpu_init+0x2f0/0x494
     [    3.377422] lr : its_cpu_init+0x2ec/0x494
     [    3.377423] sp : ffff8000125b3ee0
     [    3.377423] x29: ffff8000125b3ee0 x28: 0000000000000000
     [    3.377425] x27: 0000000000000000 x26: 0000000000000000
     [    3.377426] x25: 0000000000000000 x24: ffff8000134c0000
     [    3.377427] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.377428] x21: ffff8000117a9000 x20: fffffe0001cbf000
     [    3.377429] x19: ffff8000117db000 x18: 0000000000000000
     [    3.377430] x17: 0000000000000000 x16: 0000000000000000
     [    3.377431] x15: 0000000000000000 x14: 0000000000000000
     [    3.377432] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.377433] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.377434] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.377435] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.377435] x5 : 00000000a0a0a0a0 x4 : ffffa0260e0f4000
     [    3.377436] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.377438] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.377439] Call trace:
     [    3.377440]  its_cpu_init+0x2f0/0x494
     [    3.377442]  gic_starting_cpu+0x18/0x24
     [    3.377443]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.377444]  notify_cpu_starting+0x9c/0xb8
     [    3.377446]  secondary_start_kernel+0xdc/0x168
     [    3.377447] ---[ end trace f68728a0d3053bae ]---
     [    3.377453] GICv3: CPU92: using allocated LPI pending table 
@0x000000007afc0000
     [    3.377479] Xen: initializing cpu92
     [    3.377492] CPU92: Booted secondary processor 0x000000050c 
[0x481fd010]
     [    3.406634] Detected VIPT I-cache on CPU93
     [    3.406769] GICv3: CPU93: found redistributor 50d region 
46:0x00000000aa4a0000
     [    3.413462] ------------[ cut here ]------------
     [    3.413466] WARNING: CPU: 93 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.413466] Modules linked in:
     [    3.413469] CPU: 93 PID: 0 Comm: swapper/93 Tainted: G W         
5.5.0-rc5 #132
     [    3.413470] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.413472] pc : its_cpu_init+0x2f0/0x494
     [    3.413473] lr : its_cpu_init+0x2ec/0x494
     [    3.413474] sp : ffff8000125bbee0
     [    3.413474] x29: ffff8000125bbee0 x28: 0000000000000000
     [    3.413476] x27: 0000000000000000 x26: 0000000000000000
     [    3.413477] x25: 0000000000000000 x24: ffff8000134e0000
     [    3.413478] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.413479] x21: ffff8000117a9000 x20: fffffe0001cbf400
     [    3.413480] x19: ffff8000117db000 x18: 0000000000000000
     [    3.413481] x17: 0000000000000000 x16: 0000000000000000
     [    3.413482] x15: 0000000000000000 x14: 0000000000000000
     [    3.413482] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.413483] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.413484] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.413485] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.413486] x5 : 00000000a0a0a0a0 x4 : ffffa0260e10a000
     [    3.413487] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.413488] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.413490] Call trace:
     [    3.413491]  its_cpu_init+0x2f0/0x494
     [    3.413492]  gic_starting_cpu+0x18/0x24
     [    3.413494]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.413495]  notify_cpu_starting+0x9c/0xb8
     [    3.413497]  secondary_start_kernel+0xdc/0x168
     [    3.413497] ---[ end trace f68728a0d3053baf ]---
     [    3.413502] GICv3: CPU93: using allocated LPI pending table 
@0x000000007afd0000
     [    3.413524] Xen: initializing cpu93
     [    3.413534] CPU93: Booted secondary processor 0x000000050d 
[0x481fd010]
     [    3.442723] Detected VIPT I-cache on CPU94
     [    3.442860] GICv3: CPU94: found redistributor 50e region 
47:0x00000000aa4c0000
     [    3.449552] ------------[ cut here ]------------
     [    3.449556] WARNING: CPU: 94 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.449556] Modules linked in:
     [    3.449559] CPU: 94 PID: 0 Comm: swapper/94 Tainted: G W         
5.5.0-rc5 #132
     [    3.449560] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.449562] pc : its_cpu_init+0x2f0/0x494
     [    3.449563] lr : its_cpu_init+0x2ec/0x494
     [    3.449564] sp : ffff80001260bee0
     [    3.449564] x29: ffff80001260bee0 x28: 0000000000000000
     [    3.449566] x27: 0000000000000000 x26: 0000000000000000
     [    3.449567] x25: 0000000000000000 x24: ffff800013540000
     [    3.449568] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.449569] x21: ffff8000117a9000 x20: fffffe0001cbf800
     [    3.449570] x19: ffff8000117db000 x18: 0000000000000000
     [    3.449571] x17: 0000000000000000 x16: 0000000000000000
     [    3.449571] x15: 0000000000000000 x14: 0000000000000000
     [    3.449572] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.449573] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.449574] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.449575] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.449576] x5 : 00000000a0a0a0a0 x4 : ffffa0260e120000
     [    3.449577] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.449578] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.449579] Call trace:
     [    3.449581]  its_cpu_init+0x2f0/0x494
     [    3.449582]  gic_starting_cpu+0x18/0x24
     [    3.449583]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.449584]  notify_cpu_starting+0x9c/0xb8
     [    3.449586]  secondary_start_kernel+0xdc/0x168
     [    3.449587] ---[ end trace f68728a0d3053bb0 ]---
     [    3.449592] GICv3: CPU94: using allocated LPI pending table 
@0x000000007afe0000
     [    3.449614] Xen: initializing cpu94
     [    3.449624] CPU94: Booted secondary processor 0x000000050e 
[0x481fd010]
     [    3.478794] Detected VIPT I-cache on CPU95
     [    3.478931] GICv3: CPU95: found redistributor 50f region 
47:0x00000000aa4e0000
     [    3.485622] ------------[ cut here ]------------
     [    3.485626] WARNING: CPU: 95 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.485626] Modules linked in:
     [    3.485628] CPU: 95 PID: 0 Comm: swapper/95 Tainted: G W         
5.5.0-rc5 #132
     [    3.485630] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.485631] pc : its_cpu_init+0x2f0/0x494
     [    3.485633] lr : its_cpu_init+0x2ec/0x494
     [    3.485633] sp : ffff800012613ee0
     [    3.485634] x29: ffff800012613ee0 x28: 0000000000000000
     [    3.485635] x27: 0000000000000000 x26: 0000000000000000
     [    3.485636] x25: 0000000000000000 x24: ffff800013560000
     [    3.485637] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.485638] x21: ffff8000117a9000 x20: fffffe0001cbfc00
     [    3.485639] x19: ffff8000117db000 x18: 0000000000000000
     [    3.485640] x17: 0000000000000000 x16: 0000000000000000
     [    3.485641] x15: 0000000000000000 x14: 0000000000000000
     [    3.485642] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.485643] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.485644] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.485645] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.485646] x5 : 00000000a0a0a0a0 x4 : ffffa0260e136000
     [    3.485647] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.485648] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.485649] Call trace:
     [    3.485651]  its_cpu_init+0x2f0/0x494
     [    3.485652]  gic_starting_cpu+0x18/0x24
     [    3.485653]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.485655]  notify_cpu_starting+0x9c/0xb8
     [    3.485656]  secondary_start_kernel+0xdc/0x168
     [    3.485657] ---[ end trace f68728a0d3053bb1 ]---
     [    3.485662] GICv3: CPU95: using allocated LPI pending table 
@0x000000007aff0000
     [    3.485684] Xen: initializing cpu95
     [    3.485695] CPU95: Booted secondary processor 0x000000050f 
[0x481fd010]
     [    3.514892] Detected VIPT I-cache on CPU96
     [    3.515069] GICv3: CPU96: found redistributor 600 region 
48:0x00000000aa500000
     [    3.521789] ------------[ cut here ]------------
     [    3.521801] WARNING: CPU: 96 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.521803] Modules linked in:
     [    3.521809] CPU: 96 PID: 0 Comm: swapper/96 Tainted: G W         
5.5.0-rc5 #132
     [    3.521810] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.521812] pc : its_cpu_init+0x2f0/0x494
     [    3.521813] lr : its_cpu_init+0x2ec/0x494
     [    3.521814] sp : ffff80001261bee0
     [    3.521815] x29: ffff80001261bee0 x28: 0000000000000000
     [    3.521816] x27: 0000000000000000 x26: 0000000000000000
     [    3.521817] x25: 0000000000000000 x24: ffff8000135c0000
     [    3.521818] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.521819] x21: ffff8000117a9000 x20: fffffe0001ca0000
     [    3.521820] x19: ffff8000117db000 x18: 0000000000000000
     [    3.521821] x17: 0000000000000000 x16: 0000000000000000
     [    3.521822] x15: 0000000000000000 x14: 0000000000000000
     [    3.521823] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.521824] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.521825] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.521826] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.521827] x5 : 00000000a0a0a0a0 x4 : ffffa02609967000
     [    3.521828] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.521829] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.521831] Call trace:
     [    3.521833]  its_cpu_init+0x2f0/0x494
     [    3.521835]  gic_starting_cpu+0x18/0x24
     [    3.521839]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.521841]  notify_cpu_starting+0x9c/0xb8
     [    3.521845]  secondary_start_kernel+0xdc/0x168
     [    3.521846] ---[ end trace f68728a0d3053bb2 ]---
     [    3.521854] GICv3: CPU96: using allocated LPI pending table 
@0x000000007a800000
     [    3.521903] Xen: initializing cpu96
     [    3.521935] CPU96: Booted secondary processor 0x0000000600 
[0x481fd010]
     [    3.550930] Detected VIPT I-cache on CPU97
     [    3.551074] GICv3: CPU97: found redistributor 601 region 
48:0x00000000aa520000
     [    3.557768] ------------[ cut here ]------------
     [    3.557772] WARNING: CPU: 97 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.557773] Modules linked in:
     [    3.557775] CPU: 97 PID: 0 Comm: swapper/97 Tainted: G W         
5.5.0-rc5 #132
     [    3.557776] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.557778] pc : its_cpu_init+0x2f0/0x494
     [    3.557780] lr : its_cpu_init+0x2ec/0x494
     [    3.557780] sp : ffff800012623ee0
     [    3.557781] x29: ffff800012623ee0 x28: 0000000000000000
     [    3.557782] x27: 0000000000000000 x26: 0000000000000000
     [    3.557783] x25: 0000000000000000 x24: ffff8000135e0000
     [    3.557784] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.557785] x21: ffff8000117a9000 x20: fffffe0001ca0400
     [    3.557786] x19: ffff8000117db000 x18: 0000000000000000
     [    3.557787] x17: 0000000000000000 x16: 0000000000000000
     [    3.557788] x15: 0000000000000000 x14: 0000000000000000
     [    3.557789] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.557790] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.557791] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.557792] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.557793] x5 : 00000000a0a0a0a0 x4 : ffffa0260997d000
     [    3.557794] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.557795] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.557796] Call trace:
     [    3.557798]  its_cpu_init+0x2f0/0x494
     [    3.557799]  gic_starting_cpu+0x18/0x24
     [    3.557800]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.557802]  notify_cpu_starting+0x9c/0xb8
     [    3.557803]  secondary_start_kernel+0xdc/0x168
     [    3.557804] ---[ end trace f68728a0d3053bb3 ]---
     [    3.557809] GICv3: CPU97: using allocated LPI pending table 
@0x000000007a810000
     [    3.557833] Xen: initializing cpu97
     [    3.557843] CPU97: Booted secondary processor 0x0000000601 
[0x481fd010]
     [    3.586999] Detected VIPT I-cache on CPU98
     [    3.587140] GICv3: CPU98: found redistributor 602 region 
49:0x00000000aa540000
     [    3.593833] ------------[ cut here ]------------
     [    3.593837] WARNING: CPU: 98 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.593837] Modules linked in:
     [    3.593840] CPU: 98 PID: 0 Comm: swapper/98 Tainted: G W         
5.5.0-rc5 #132
     [    3.593841] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.593843] pc : its_cpu_init+0x2f0/0x494
     [    3.593844] lr : its_cpu_init+0x2ec/0x494
     [    3.593845] sp : ffff80001262bee0
     [    3.593845] x29: ffff80001262bee0 x28: 0000000000000000
     [    3.593847] x27: 0000000000000000 x26: 0000000000000000
     [    3.593848] x25: 0000000000000000 x24: ffff800013640000
     [    3.593849] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.593850] x21: ffff8000117a9000 x20: fffffe0001ca0800
     [    3.593851] x19: ffff8000117db000 x18: 0000000000000000
     [    3.593852] x17: 0000000000000000 x16: 0000000000000000
     [    3.593853] x15: 0000000000000000 x14: 0000000000000000
     [    3.593854] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.593855] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.593856] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.593857] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.593858] x5 : 00000000a0a0a0a0 x4 : ffffa02609993000
     [    3.593859] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.593860] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.593861] Call trace:
     [    3.593862]  its_cpu_init+0x2f0/0x494
     [    3.593864]  gic_starting_cpu+0x18/0x24
     [    3.593866]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.593867]  notify_cpu_starting+0x9c/0xb8
     [    3.593868]  secondary_start_kernel+0xdc/0x168
     [    3.593869] ---[ end trace f68728a0d3053bb4 ]---
     [    3.593875] GICv3: CPU98: using allocated LPI pending table 
@0x000000007a820000
     [    3.593898] Xen: initializing cpu98
     [    3.593907] CPU98: Booted secondary processor 0x0000000602 
[0x481fd010]
     [    3.623068] Detected VIPT I-cache on CPU99
     [    3.623212] GICv3: CPU99: found redistributor 603 region 
49:0x00000000aa560000
     [    3.629904] ------------[ cut here ]------------
     [    3.629908] WARNING: CPU: 99 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.629909] Modules linked in:
     [    3.629911] CPU: 99 PID: 0 Comm: swapper/99 Tainted: G W         
5.5.0-rc5 #132
     [    3.629912] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.629914] pc : its_cpu_init+0x2f0/0x494
     [    3.629915] lr : its_cpu_init+0x2ec/0x494
     [    3.629916] sp : ffff800012633ee0
     [    3.629917] x29: ffff800012633ee0 x28: 0000000000000000
     [    3.629918] x27: 0000000000000000 x26: 0000000000000000
     [    3.629919] x25: 0000000000000000 x24: ffff800013660000
     [    3.629920] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.629921] x21: ffff8000117a9000 x20: fffffe0001ca0c00
     [    3.629922] x19: ffff8000117db000 x18: 0000000000000000
     [    3.629923] x17: 0000000000000000 x16: 0000000000000000
     [    3.629924] x15: 0000000000000000 x14: 0000000000000000
     [    3.629925] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.629926] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.629927] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.629928] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.629929] x5 : 00000000a0a0a0a0 x4 : ffffa026099a9000
     [    3.629930] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.629931] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.629933] Call trace:
     [    3.629934]  its_cpu_init+0x2f0/0x494
     [    3.629936]  gic_starting_cpu+0x18/0x24
     [    3.629938]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.629939]  notify_cpu_starting+0x9c/0xb8
     [    3.629940]  secondary_start_kernel+0xdc/0x168
     [    3.629941] ---[ end trace f68728a0d3053bb5 ]---
     [    3.629947] GICv3: CPU99: using allocated LPI pending table 
@0x000000007a830000
     [    3.629969] Xen: initializing cpu99
     [    3.629979] CPU99: Booted secondary processor 0x0000000603 
[0x481fd010]
     [    3.659282] Detected VIPT I-cache on CPU100
     [    3.659433] GICv3: CPU100: found redistributor 604 region 
50:0x00000000aa580000
     [    3.666220] ------------[ cut here ]------------
     [    3.666225] WARNING: CPU: 100 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.666226] Modules linked in:
     [    3.666228] CPU: 100 PID: 0 Comm: swapper/100 Tainted: G        
W         5.5.0-rc5 #132
     [    3.666230] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.666231] pc : its_cpu_init+0x2f0/0x494
     [    3.666233] lr : its_cpu_init+0x2ec/0x494
     [    3.666233] sp : ffff80001268bee0
     [    3.666234] x29: ffff80001268bee0 x28: 0000000000000000
     [    3.666235] x27: 0000000000000000 x26: 0000000000000000
     [    3.666236] x25: 0000000000000000 x24: ffff8000136c0000
     [    3.666237] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.666238] x21: ffff8000117a9000 x20: fffffe0001ca1000
     [    3.666239] x19: ffff8000117db000 x18: 0000000000000000
     [    3.666240] x17: 0000000000000000 x16: 0000000000000000
     [    3.666241] x15: 0000000000000000 x14: 0000000000000000
     [    3.666242] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.666243] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.666244] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.666245] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.666246] x5 : 00000000a0a0a0a0 x4 : ffffa026099bf000
     [    3.666247] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.666248] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.666250] Call trace:
     [    3.666251]  its_cpu_init+0x2f0/0x494
     [    3.666253]  gic_starting_cpu+0x18/0x24
     [    3.666254]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.666256]  notify_cpu_starting+0x9c/0xb8
     [    3.666258]  secondary_start_kernel+0xdc/0x168
     [    3.666259] ---[ end trace f68728a0d3053bb6 ]---
     [    3.666264] GICv3: CPU100: using allocated LPI pending table 
@0x000000007a840000
     [    3.666292] Xen: initializing cpu100
     [    3.666307] CPU100: Booted secondary processor 0x0000000604 
[0x481fd010]
     [    3.695347] Detected VIPT I-cache on CPU101
     [    3.695495] GICv3: CPU101: found redistributor 605 region 
50:0x00000000aa5a0000
     [    3.702274] ------------[ cut here ]------------
     [    3.702278] WARNING: CPU: 101 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.702278] Modules linked in:
     [    3.702281] CPU: 101 PID: 0 Comm: swapper/101 Tainted: G        
W         5.5.0-rc5 #132
     [    3.702282] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.702283] pc : its_cpu_init+0x2f0/0x494
     [    3.702285] lr : its_cpu_init+0x2ec/0x494
     [    3.702285] sp : ffff800012693ee0
     [    3.702286] x29: ffff800012693ee0 x28: 0000000000000000
     [    3.702287] x27: 0000000000000000 x26: 0000000000000000
     [    3.702288] x25: 0000000000000000 x24: ffff8000136e0000
     [    3.702289] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.702290] x21: ffff8000117a9000 x20: fffffe0001ca1400
     [    3.702291] x19: ffff8000117db000 x18: 0000000000000000
     [    3.702292] x17: 0000000000000000 x16: 0000000000000000
     [    3.702293] x15: 0000000000000000 x14: 0000000000000000
     [    3.702294] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.702295] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.702296] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.702297] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.702298] x5 : 00000000a0a0a0a0 x4 : ffffa026099d5000
     [    3.702299] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.702300] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.702301] Call trace:
     [    3.702303]  its_cpu_init+0x2f0/0x494
     [    3.702304]  gic_starting_cpu+0x18/0x24
     [    3.702305]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.702307]  notify_cpu_starting+0x9c/0xb8
     [    3.702308]  secondary_start_kernel+0xdc/0x168
     [    3.702309] ---[ end trace f68728a0d3053bb7 ]---
     [    3.702315] GICv3: CPU101: using allocated LPI pending table 
@0x000000007a850000
     [    3.702339] Xen: initializing cpu101
     [    3.702351] CPU101: Booted secondary processor 0x0000000605 
[0x481fd010]
     [    3.731432] Detected VIPT I-cache on CPU102
     [    3.731577] GICv3: CPU102: found redistributor 606 region 
51:0x00000000aa5c0000
     [    3.738356] ------------[ cut here ]------------
     [    3.738360] WARNING: CPU: 102 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.738360] Modules linked in:
     [    3.738363] CPU: 102 PID: 0 Comm: swapper/102 Tainted: G        
W         5.5.0-rc5 #132
     [    3.738364] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.738366] pc : its_cpu_init+0x2f0/0x494
     [    3.738367] lr : its_cpu_init+0x2ec/0x494
     [    3.738367] sp : ffff80001269bee0
     [    3.738368] x29: ffff80001269bee0 x28: 0000000000000000
     [    3.738369] x27: 0000000000000000 x26: 0000000000000000
     [    3.738370] x25: 0000000000000000 x24: ffff800013740000
     [    3.738371] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.738372] x21: ffff8000117a9000 x20: fffffe0001ca1800
     [    3.738373] x19: ffff8000117db000 x18: 0000000000000000
     [    3.738374] x17: 0000000000000000 x16: 0000000000000000
     [    3.738375] x15: 0000000000000000 x14: 0000000000000000
     [    3.738376] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.738377] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.738378] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.738379] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.738380] x5 : 00000000a0a0a0a0 x4 : ffffa026099eb000
     [    3.738381] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.738382] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.738383] Call trace:
     [    3.738385]  its_cpu_init+0x2f0/0x494
     [    3.738386]  gic_starting_cpu+0x18/0x24
     [    3.738388]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.738389]  notify_cpu_starting+0x9c/0xb8
     [    3.738390]  secondary_start_kernel+0xdc/0x168
     [    3.738391] ---[ end trace f68728a0d3053bb8 ]---
     [    3.738396] GICv3: CPU102: using allocated LPI pending table 
@0x000000007a860000
     [    3.738420] Xen: initializing cpu102
     [    3.738430] CPU102: Booted secondary processor 0x0000000606 
[0x481fd010]
     [    3.767517] Detected VIPT I-cache on CPU103
     [    3.767665] GICv3: CPU103: found redistributor 607 region 
51:0x00000000aa5e0000
     [    3.774444] ------------[ cut here ]------------
     [    3.774448] WARNING: CPU: 103 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.774448] Modules linked in:
     [    3.774450] CPU: 103 PID: 0 Comm: swapper/103 Tainted: G        
W         5.5.0-rc5 #132
     [    3.774452] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.774454] pc : its_cpu_init+0x2f0/0x494
     [    3.774455] lr : its_cpu_init+0x2ec/0x494
     [    3.774455] sp : ffff8000126a3ee0
     [    3.774456] x29: ffff8000126a3ee0 x28: 0000000000000000
     [    3.774457] x27: 0000000000000000 x26: 0000000000000000
     [    3.774458] x25: 0000000000000000 x24: ffff800013760000
     [    3.774459] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.774460] x21: ffff8000117a9000 x20: fffffe0001ca1c00
     [    3.774461] x19: ffff8000117db000 x18: 0000000000000000
     [    3.774462] x17: 0000000000000000 x16: 0000000000000000
     [    3.774463] x15: 0000000000000000 x14: 0000000000000000
     [    3.774464] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.774465] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.774466] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.774467] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.774468] x5 : 00000000a0a0a0a0 x4 : ffffa02609a01000
     [    3.774469] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.774470] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.774472] Call trace:
     [    3.774474]  its_cpu_init+0x2f0/0x494
     [    3.774475]  gic_starting_cpu+0x18/0x24
     [    3.774476]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.774478]  notify_cpu_starting+0x9c/0xb8
     [    3.774480]  secondary_start_kernel+0xdc/0x168
     [    3.774480] ---[ end trace f68728a0d3053bb9 ]---
     [    3.774486] GICv3: CPU103: using allocated LPI pending table 
@0x000000007a870000
     [    3.774507] Xen: initializing cpu103
     [    3.774518] CPU103: Booted secondary processor 0x0000000607 
[0x481fd010]
     [    3.803613] Detected VIPT I-cache on CPU104
     [    3.803767] GICv3: CPU104: found redistributor 608 region 
52:0x00000000aa600000
     [    3.810554] ------------[ cut here ]------------
     [    3.810559] WARNING: CPU: 104 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.810559] Modules linked in:
     [    3.810562] CPU: 104 PID: 0 Comm: swapper/104 Tainted: G        
W         5.5.0-rc5 #132
     [    3.810564] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.810565] pc : its_cpu_init+0x2f0/0x494
     [    3.810566] lr : its_cpu_init+0x2ec/0x494
     [    3.810567] sp : ffff8000126abee0
     [    3.810568] x29: ffff8000126abee0 x28: 0000000000000000
     [    3.810569] x27: 0000000000000000 x26: 0000000000000000
     [    3.810570] x25: 0000000000000000 x24: ffff8000137c0000
     [    3.810571] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.810572] x21: ffff8000117a9000 x20: fffffe0001ca2000
     [    3.810573] x19: ffff8000117db000 x18: 0000000000000000
     [    3.810574] x17: 0000000000000000 x16: 0000000000000000
     [    3.810575] x15: 0000000000000000 x14: 0000000000000000
     [    3.810576] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.810577] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.810578] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.810579] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.810580] x5 : 00000000a0a0a0a0 x4 : ffffa02609a17000
     [    3.810581] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.810582] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.810584] Call trace:
     [    3.810585]  its_cpu_init+0x2f0/0x494
     [    3.810587]  gic_starting_cpu+0x18/0x24
     [    3.810588]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.810589]  notify_cpu_starting+0x9c/0xb8
     [    3.810591]  secondary_start_kernel+0xdc/0x168
     [    3.810592] ---[ end trace f68728a0d3053bba ]---
     [    3.810599] GICv3: CPU104: using allocated LPI pending table 
@0x000000007a880000
     [    3.810627] Xen: initializing cpu104
     [    3.810640] CPU104: Booted secondary processor 0x0000000608 
[0x481fd010]
     [    3.839689] Detected VIPT I-cache on CPU105
     [    3.839841] GICv3: CPU105: found redistributor 609 region 
52:0x00000000aa620000
     [    3.846620] ------------[ cut here ]------------
     [    3.846624] WARNING: CPU: 105 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.846625] Modules linked in:
     [    3.846627] CPU: 105 PID: 0 Comm: swapper/105 Tainted: G        
W         5.5.0-rc5 #132
     [    3.846629] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.846630] pc : its_cpu_init+0x2f0/0x494
     [    3.846632] lr : its_cpu_init+0x2ec/0x494
     [    3.846632] sp : ffff8000126b3ee0
     [    3.846633] x29: ffff8000126b3ee0 x28: 0000000000000000
     [    3.846634] x27: 0000000000000000 x26: 0000000000000000
     [    3.846635] x25: 0000000000000000 x24: ffff8000137e0000
     [    3.846636] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.846637] x21: ffff8000117a9000 x20: fffffe0001ca2400
     [    3.846638] x19: ffff8000117db000 x18: 0000000000000000
     [    3.846639] x17: 0000000000000000 x16: 0000000000000000
     [    3.846640] x15: 0000000000000000 x14: 0000000000000000
     [    3.846641] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.846642] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.846643] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.846644] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.846645] x5 : 00000000a0a0a0a0 x4 : ffffa02609a2d000
     [    3.846646] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.846647] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.846648] Call trace:
     [    3.846650]  its_cpu_init+0x2f0/0x494
     [    3.846651]  gic_starting_cpu+0x18/0x24
     [    3.846652]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.846654]  notify_cpu_starting+0x9c/0xb8
     [    3.846655]  secondary_start_kernel+0xdc/0x168
     [    3.846656] ---[ end trace f68728a0d3053bbb ]---
     [    3.846662] GICv3: CPU105: using allocated LPI pending table 
@0x000000007a890000
     [    3.846684] Xen: initializing cpu105
     [    3.846696] CPU105: Booted secondary processor 0x0000000609 
[0x481fd010]
     [    3.875775] Detected VIPT I-cache on CPU106
     [    3.875925] GICv3: CPU106: found redistributor 60a region 
53:0x00000000aa640000
     [    3.882704] ------------[ cut here ]------------
     [    3.882708] WARNING: CPU: 106 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.882708] Modules linked in:
     [    3.882711] CPU: 106 PID: 0 Comm: swapper/106 Tainted: G        
W         5.5.0-rc5 #132
     [    3.882712] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.882714] pc : its_cpu_init+0x2f0/0x494
     [    3.882715] lr : its_cpu_init+0x2ec/0x494
     [    3.882715] sp : ffff8000126bbee0
     [    3.882716] x29: ffff8000126bbee0 x28: 0000000000000000
     [    3.882717] x27: 0000000000000000 x26: 0000000000000000
     [    3.882718] x25: 0000000000000000 x24: ffff800013840000
     [    3.882719] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.882720] x21: ffff8000117a9000 x20: fffffe0001ca2800
     [    3.882721] x19: ffff8000117db000 x18: 0000000000000000
     [    3.882722] x17: 0000000000000000 x16: 0000000000000000
     [    3.882723] x15: 0000000000000000 x14: 0000000000000000
     [    3.882724] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.882725] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.882726] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.882727] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.882728] x5 : 00000000a0a0a0a0 x4 : ffffa02609a43000
     [    3.882729] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.882730] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.882732] Call trace:
     [    3.882733]  its_cpu_init+0x2f0/0x494
     [    3.882734]  gic_starting_cpu+0x18/0x24
     [    3.882736]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.882737]  notify_cpu_starting+0x9c/0xb8
     [    3.882738]  secondary_start_kernel+0xdc/0x168
     [    3.882739] ---[ end trace f68728a0d3053bbc ]---
     [    3.882744] GICv3: CPU106: using allocated LPI pending table 
@0x000000007a8a0000
     [    3.882770] Xen: initializing cpu106
     [    3.882781] CPU106: Booted secondary processor 0x000000060a 
[0x481fd010]
     [    3.911836] Detected VIPT I-cache on CPU107
     [    3.911990] GICv3: CPU107: found redistributor 60b region 
53:0x00000000aa660000
     [    3.918769] ------------[ cut here ]------------
     [    3.918773] WARNING: CPU: 107 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.918774] Modules linked in:
     [    3.918776] CPU: 107 PID: 0 Comm: swapper/107 Tainted: G        
W         5.5.0-rc5 #132
     [    3.918777] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.918779] pc : its_cpu_init+0x2f0/0x494
     [    3.918780] lr : its_cpu_init+0x2ec/0x494
     [    3.918781] sp : ffff80001270bee0
     [    3.918781] x29: ffff80001270bee0 x28: 0000000000000000
     [    3.918783] x27: 0000000000000000 x26: 0000000000000000
     [    3.918784] x25: 0000000000000000 x24: ffff800013860000
     [    3.918785] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.918786] x21: ffff8000117a9000 x20: fffffe0001ca2c00
     [    3.918787] x19: ffff8000117db000 x18: 0000000000000000
     [    3.918787] x17: 0000000000000000 x16: 0000000000000000
     [    3.918788] x15: 0000000000000000 x14: 0000000000000000
     [    3.918789] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.918790] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.918791] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.918792] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.918793] x5 : 00000000a0a0a0a0 x4 : ffffa02609a59000
     [    3.918794] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.918795] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.918797] Call trace:
     [    3.918798]  its_cpu_init+0x2f0/0x494
     [    3.918800]  gic_starting_cpu+0x18/0x24
     [    3.918801]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.918803]  notify_cpu_starting+0x9c/0xb8
     [    3.918804]  secondary_start_kernel+0xdc/0x168
     [    3.918805] ---[ end trace f68728a0d3053bbd ]---
     [    3.918810] GICv3: CPU107: using allocated LPI pending table 
@0x000000007a8b0000
     [    3.918831] Xen: initializing cpu107
     [    3.918842] CPU107: Booted secondary processor 0x000000060b 
[0x481fd010]
     [    3.947915] Detected VIPT I-cache on CPU108
     [    3.948074] GICv3: CPU108: found redistributor 60c region 
54:0x00000000aa680000
     [    3.954861] ------------[ cut here ]------------
     [    3.954866] WARNING: CPU: 108 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.954866] Modules linked in:
     [    3.954869] CPU: 108 PID: 0 Comm: swapper/108 Tainted: G        
W         5.5.0-rc5 #132
     [    3.954870] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.954872] pc : its_cpu_init+0x2f0/0x494
     [    3.954873] lr : its_cpu_init+0x2ec/0x494
     [    3.954874] sp : ffff800012713ee0
     [    3.954875] x29: ffff800012713ee0 x28: 0000000000000000
     [    3.954877] x27: 0000000000000000 x26: 0000000000000000
     [    3.954878] x25: 0000000000000000 x24: ffff8000138c0000
     [    3.954879] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.954880] x21: ffff8000117a9000 x20: fffffe0001ca3000
     [    3.954881] x19: ffff8000117db000 x18: 0000000000000000
     [    3.954882] x17: 0000000000000000 x16: 0000000000000000
     [    3.954883] x15: 0000000000000000 x14: 0000000000000000
     [    3.954883] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.954884] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.954885] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.954886] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.954887] x5 : 00000000a0a0a0a0 x4 : ffffa02609a6f000
     [    3.954888] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.954889] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.954890] Call trace:
     [    3.954892]  its_cpu_init+0x2f0/0x494
     [    3.954893]  gic_starting_cpu+0x18/0x24
     [    3.954895]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.954896]  notify_cpu_starting+0x9c/0xb8
     [    3.954897]  secondary_start_kernel+0xdc/0x168
     [    3.954898] ---[ end trace f68728a0d3053bbe ]---
     [    3.954904] GICv3: CPU108: using allocated LPI pending table 
@0x000000007a8c0000
     [    3.954930] Xen: initializing cpu108
     [    3.954945] CPU108: Booted secondary processor 0x000000060c 
[0x481fd010]
     [    3.983983] Detected VIPT I-cache on CPU109
     [    3.984140] GICv3: CPU109: found redistributor 60d region 
54:0x00000000aa6a0000
     [    3.990919] ------------[ cut here ]------------
     [    3.990923] WARNING: CPU: 109 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    3.990924] Modules linked in:
     [    3.990926] CPU: 109 PID: 0 Comm: swapper/109 Tainted: G        
W         5.5.0-rc5 #132
     [    3.990928] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    3.990929] pc : its_cpu_init+0x2f0/0x494
     [    3.990931] lr : its_cpu_init+0x2ec/0x494
     [    3.990931] sp : ffff80001271bee0
     [    3.990932] x29: ffff80001271bee0 x28: 0000000000000000
     [    3.990933] x27: 0000000000000000 x26: 0000000000000000
     [    3.990934] x25: 0000000000000000 x24: ffff8000138e0000
     [    3.990935] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    3.990936] x21: ffff8000117a9000 x20: fffffe0001ca3400
     [    3.990937] x19: ffff8000117db000 x18: 0000000000000000
     [    3.990938] x17: 0000000000000000 x16: 0000000000000000
     [    3.990939] x15: 0000000000000000 x14: 0000000000000000
     [    3.990940] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    3.990941] x11: ffffffffffffffff x10: ffff8000119916a0
     [    3.990942] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    3.990943] x7 : 0000000000000000 x6 : 0000000000000070
     [    3.990944] x5 : 00000000a0a0a0a0 x4 : ffffa02609a85000
     [    3.990945] x3 : 000000000000003d x2 : ffffffffffffffff
     [    3.990946] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    3.990947] Call trace:
     [    3.990948]  its_cpu_init+0x2f0/0x494
     [    3.990950]  gic_starting_cpu+0x18/0x24
     [    3.990951]  cpuhp_invoke_callback+0x84/0x1e0
     [    3.990953]  notify_cpu_starting+0x9c/0xb8
     [    3.990954]  secondary_start_kernel+0xdc/0x168
     [    3.990955] ---[ end trace f68728a0d3053bbf ]---
     [    3.990960] GICv3: CPU109: using allocated LPI pending table 
@0x000000007a8d0000
     [    3.990983] Xen: initializing cpu109
     [    3.990992] CPU109: Booted secondary processor 0x000000060d 
[0x481fd010]
     [    4.020059] Detected VIPT I-cache on CPU110
     [    4.020214] GICv3: CPU110: found redistributor 60e region 
55:0x00000000aa6c0000
     [    4.026993] ------------[ cut here ]------------
     [    4.026997] WARNING: CPU: 110 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.026997] Modules linked in:
     [    4.026999] CPU: 110 PID: 0 Comm: swapper/110 Tainted: G        
W         5.5.0-rc5 #132
     [    4.027001] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.027002] pc : its_cpu_init+0x2f0/0x494
     [    4.027004] lr : its_cpu_init+0x2ec/0x494
     [    4.027004] sp : ffff800012723ee0
     [    4.027005] x29: ffff800012723ee0 x28: 0000000000000000
     [    4.027006] x27: 0000000000000000 x26: 0000000000000000
     [    4.027007] x25: 0000000000000000 x24: ffff800013940000
     [    4.027008] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.027009] x21: ffff8000117a9000 x20: fffffe0001ca3800
     [    4.027010] x19: ffff8000117db000 x18: 0000000000000000
     [    4.027011] x17: 0000000000000000 x16: 0000000000000000
     [    4.027012] x15: 0000000000000000 x14: 0000000000000000
     [    4.027013] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.027014] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.027015] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.027016] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.027017] x5 : 00000000a0a0a0a0 x4 : ffffa02609a9b000
     [    4.027018] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.027019] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.027020] Call trace:
     [    4.027022]  its_cpu_init+0x2f0/0x494
     [    4.027023]  gic_starting_cpu+0x18/0x24
     [    4.027024]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.027026]  notify_cpu_starting+0x9c/0xb8
     [    4.027027]  secondary_start_kernel+0xdc/0x168
     [    4.027028] ---[ end trace f68728a0d3053bc0 ]---
     [    4.027034] GICv3: CPU110: using allocated LPI pending table 
@0x000000007a8e0000
     [    4.027055] Xen: initializing cpu110
     [    4.027065] CPU110: Booted secondary processor 0x000000060e 
[0x481fd010]
     [    4.056133] Detected VIPT I-cache on CPU111
     [    4.056290] GICv3: CPU111: found redistributor 60f region 
55:0x00000000aa6e0000
     [    4.063070] ------------[ cut here ]------------
     [    4.063074] WARNING: CPU: 111 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.063074] Modules linked in:
     [    4.063077] CPU: 111 PID: 0 Comm: swapper/111 Tainted: G        
W         5.5.0-rc5 #132
     [    4.063078] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.063079] pc : its_cpu_init+0x2f0/0x494
     [    4.063081] lr : its_cpu_init+0x2ec/0x494
     [    4.063082] sp : ffff80001272bee0
     [    4.063082] x29: ffff80001272bee0 x28: 0000000000000000
     [    4.063083] x27: 0000000000000000 x26: 0000000000000000
     [    4.063084] x25: 0000000000000000 x24: ffff800013960000
     [    4.063085] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.063086] x21: ffff8000117a9000 x20: fffffe0001ca3c00
     [    4.063088] x19: ffff8000117db000 x18: 0000000000000000
     [    4.063088] x17: 0000000000000000 x16: 0000000000000000
     [    4.063089] x15: 0000000000000000 x14: 0000000000000000
     [    4.063090] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.063091] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.063092] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.063093] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.063094] x5 : 00000000a0a0a0a0 x4 : ffffa02609ab1000
     [    4.063096] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.063097] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.063098] Call trace:
     [    4.063100]  its_cpu_init+0x2f0/0x494
     [    4.063101]  gic_starting_cpu+0x18/0x24
     [    4.063102]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.063104]  notify_cpu_starting+0x9c/0xb8
     [    4.063105]  secondary_start_kernel+0xdc/0x168
     [    4.063106] ---[ end trace f68728a0d3053bc1 ]---
     [    4.063111] GICv3: CPU111: using allocated LPI pending table 
@0x000000007a8f0000
     [    4.063133] Xen: initializing cpu111
     [    4.063143] CPU111: Booted secondary processor 0x000000060f 
[0x481fd010]
     [    4.092211] Detected VIPT I-cache on CPU112
     [    4.092376] GICv3: CPU112: found redistributor 700 region 
56:0x00000000aa700000
     [    4.099164] ------------[ cut here ]------------
     [    4.099168] WARNING: CPU: 112 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.099169] Modules linked in:
     [    4.099172] CPU: 112 PID: 0 Comm: swapper/112 Tainted: G        
W         5.5.0-rc5 #132
     [    4.099173] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.099175] pc : its_cpu_init+0x2f0/0x494
     [    4.099176] lr : its_cpu_init+0x2ec/0x494
     [    4.099177] sp : ffff800012733ee0
     [    4.099177] x29: ffff800012733ee0 x28: 0000000000000000
     [    4.099179] x27: 0000000000000000 x26: 0000000000000000
     [    4.099180] x25: 0000000000000000 x24: ffff8000139c0000
     [    4.099181] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.099182] x21: ffff8000117a9000 x20: fffffe0001ca4000
     [    4.099183] x19: ffff8000117db000 x18: 0000000000000000
     [    4.099184] x17: 0000000000000000 x16: 0000000000000000
     [    4.099185] x15: 0000000000000000 x14: 0000000000000000
     [    4.099185] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.099186] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.099187] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.099188] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.099189] x5 : 00000000a0a0a0a0 x4 : ffffa02609ac7000
     [    4.099190] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.099191] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.099193] Call trace:
     [    4.099194]  its_cpu_init+0x2f0/0x494
     [    4.099196]  gic_starting_cpu+0x18/0x24
     [    4.099197]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.099198]  notify_cpu_starting+0x9c/0xb8
     [    4.099200]  secondary_start_kernel+0xdc/0x168
     [    4.099201] ---[ end trace f68728a0d3053bc2 ]---
     [    4.099206] GICv3: CPU112: using allocated LPI pending table 
@0x000000007a900000
     [    4.099232] Xen: initializing cpu112
     [    4.099244] CPU112: Booted secondary processor 0x0000000700 
[0x481fd010]
     [    4.128279] Detected VIPT I-cache on CPU113
     [    4.128438] GICv3: CPU113: found redistributor 701 region 
56:0x00000000aa720000
     [    4.135222] ------------[ cut here ]------------
     [    4.135226] WARNING: CPU: 113 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.135226] Modules linked in:
     [    4.135229] CPU: 113 PID: 0 Comm: swapper/113 Tainted: G        
W         5.5.0-rc5 #132
     [    4.135230] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.135232] pc : its_cpu_init+0x2f0/0x494
     [    4.135233] lr : its_cpu_init+0x2ec/0x494
     [    4.135234] sp : ffff80001278bee0
     [    4.135234] x29: ffff80001278bee0 x28: 0000000000000000
     [    4.135236] x27: 0000000000000000 x26: 0000000000000000
     [    4.135237] x25: 0000000000000000 x24: ffff8000139e0000
     [    4.135238] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.135239] x21: ffff8000117a9000 x20: fffffe0001ca4400
     [    4.135240] x19: ffff8000117db000 x18: 0000000000000000
     [    4.135241] x17: 0000000000000000 x16: 0000000000000000
     [    4.135242] x15: 0000000000000000 x14: 0000000000000000
     [    4.135243] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.135244] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.135245] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.135246] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.135246] x5 : 00000000a0a0a0a0 x4 : ffffa02609add000
     [    4.135247] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.135248] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.135249] Call trace:
     [    4.135251]  its_cpu_init+0x2f0/0x494
     [    4.135252]  gic_starting_cpu+0x18/0x24
     [    4.135254]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.135255]  notify_cpu_starting+0x9c/0xb8
     [    4.135257]  secondary_start_kernel+0xdc/0x168
     [    4.135258] ---[ end trace f68728a0d3053bc3 ]---
     [    4.135263] GICv3: CPU113: using allocated LPI pending table 
@0x000000007a910000
     [    4.135286] Xen: initializing cpu113
     [    4.135296] CPU113: Booted secondary processor 0x0000000701 
[0x481fd010]
     [    4.164353] Detected VIPT I-cache on CPU114
     [    4.164514] GICv3: CPU114: found redistributor 702 region 
57:0x00000000aa740000
     [    4.171293] ------------[ cut here ]------------
     [    4.171297] WARNING: CPU: 114 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.171297] Modules linked in:
     [    4.171300] CPU: 114 PID: 0 Comm: swapper/114 Tainted: G        
W         5.5.0-rc5 #132
     [    4.171301] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.171303] pc : its_cpu_init+0x2f0/0x494
     [    4.171304] lr : its_cpu_init+0x2ec/0x494
     [    4.171305] sp : ffff800012793ee0
     [    4.171305] x29: ffff800012793ee0 x28: 0000000000000000
     [    4.171307] x27: 0000000000000000 x26: 0000000000000000
     [    4.171308] x25: 0000000000000000 x24: ffff800013a40000
     [    4.171309] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.171310] x21: ffff8000117a9000 x20: fffffe0001ca4800
     [    4.171311] x19: ffff8000117db000 x18: 0000000000000000
     [    4.171312] x17: 0000000000000000 x16: 0000000000000000
     [    4.171313] x15: 0000000000000000 x14: 0000000000000000
     [    4.171314] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.171315] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.171315] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.171316] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.171317] x5 : 00000000a0a0a0a0 x4 : ffffa02609af3000
     [    4.171318] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.171319] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.171321] Call trace:
     [    4.171322]  its_cpu_init+0x2f0/0x494
     [    4.171323]  gic_starting_cpu+0x18/0x24
     [    4.171325]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.171326]  notify_cpu_starting+0x9c/0xb8
     [    4.171328]  secondary_start_kernel+0xdc/0x168
     [    4.171329] ---[ end trace f68728a0d3053bc4 ]---
     [    4.171335] GICv3: CPU114: using allocated LPI pending table 
@0x000000007a920000
     [    4.171360] Xen: initializing cpu114
     [    4.171371] CPU114: Booted secondary processor 0x0000000702 
[0x481fd010]
     [    4.200457] Detected VIPT I-cache on CPU115
     [    4.200623] GICv3: CPU115: found redistributor 703 region 
57:0x00000000aa760000
     [    4.207403] ------------[ cut here ]------------
     [    4.207407] WARNING: CPU: 115 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.207408] Modules linked in:
     [    4.207411] CPU: 115 PID: 0 Comm: swapper/115 Tainted: G        
W         5.5.0-rc5 #132
     [    4.207412] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.207414] pc : its_cpu_init+0x2f0/0x494
     [    4.207415] lr : its_cpu_init+0x2ec/0x494
     [    4.207416] sp : ffff80001279bee0
     [    4.207416] x29: ffff80001279bee0 x28: 0000000000000000
     [    4.207418] x27: 0000000000000000 x26: 0000000000000000
     [    4.207419] x25: 0000000000000000 x24: ffff800013a60000
     [    4.207420] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.207421] x21: ffff8000117a9000 x20: fffffe0001ca4c00
     [    4.207422] x19: ffff8000117db000 x18: 0000000000000000
     [    4.207423] x17: 0000000000000000 x16: 0000000000000000
     [    4.207424] x15: 0000000000000000 x14: 0000000000000000
     [    4.207425] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.207425] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.207426] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.207427] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.207428] x5 : 00000000a0a0a0a0 x4 : ffffa02609b09000
     [    4.207429] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.207430] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.207432] Call trace:
     [    4.207433]  its_cpu_init+0x2f0/0x494
     [    4.207435]  gic_starting_cpu+0x18/0x24
     [    4.207436]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.207438]  notify_cpu_starting+0x9c/0xb8
     [    4.207439]  secondary_start_kernel+0xdc/0x168
     [    4.207440] ---[ end trace f68728a0d3053bc5 ]---
     [    4.207445] GICv3: CPU115: using allocated LPI pending table 
@0x000000007a930000
     [    4.207469] Xen: initializing cpu115
     [    4.207479] CPU115: Booted secondary processor 0x0000000703 
[0x481fd010]
     [    4.236555] Detected VIPT I-cache on CPU116
     [    4.236730] GICv3: CPU116: found redistributor 704 region 
58:0x00000000aa780000
     [    4.243520] ------------[ cut here ]------------
     [    4.243525] WARNING: CPU: 116 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.243526] Modules linked in:
     [    4.243528] CPU: 116 PID: 0 Comm: swapper/116 Tainted: G        
W         5.5.0-rc5 #132
     [    4.243530] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.243532] pc : its_cpu_init+0x2f0/0x494
     [    4.243533] lr : its_cpu_init+0x2ec/0x494
     [    4.243534] sp : ffff8000127a3ee0
     [    4.243534] x29: ffff8000127a3ee0 x28: 0000000000000000
     [    4.243536] x27: 0000000000000000 x26: 0000000000000000
     [    4.243537] x25: 0000000000000000 x24: ffff800013ac0000
     [    4.243538] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.243539] x21: ffff8000117a9000 x20: fffffe0001ca5000
     [    4.243540] x19: ffff8000117db000 x18: 0000000000000000
     [    4.243541] x17: 0000000000000000 x16: 0000000000000000
     [    4.243542] x15: 0000000000000000 x14: 0000000000000000
     [    4.243543] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.243544] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.243545] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.243545] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.243546] x5 : 00000000a0a0a0a0 x4 : ffffa02609b1f000
     [    4.243547] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.243548] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.243550] Call trace:
     [    4.243551]  its_cpu_init+0x2f0/0x494
     [    4.243552]  gic_starting_cpu+0x18/0x24
     [    4.243554]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.243555]  notify_cpu_starting+0x9c/0xb8
     [    4.243557]  secondary_start_kernel+0xdc/0x168
     [    4.243558] ---[ end trace f68728a0d3053bc6 ]---
     [    4.243563] GICv3: CPU116: using allocated LPI pending table 
@0x000000007a940000
     [    4.243590] Xen: initializing cpu116
     [    4.243604] CPU116: Booted secondary processor 0x0000000704 
[0x481fd010]
     [    4.272631] Detected VIPT I-cache on CPU117
     [    4.272806] GICv3: CPU117: found redistributor 705 region 
58:0x00000000aa7a0000
     [    4.279586] ------------[ cut here ]------------
     [    4.279591] WARNING: CPU: 117 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.279591] Modules linked in:
     [    4.279594] CPU: 117 PID: 0 Comm: swapper/117 Tainted: G        
W         5.5.0-rc5 #132
     [    4.279595] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.279597] pc : its_cpu_init+0x2f0/0x494
     [    4.279598] lr : its_cpu_init+0x2ec/0x494
     [    4.279599] sp : ffff8000127abee0
     [    4.279599] x29: ffff8000127abee0 x28: 0000000000000000
     [    4.279601] x27: 0000000000000000 x26: 0000000000000000
     [    4.279602] x25: 0000000000000000 x24: ffff800013ae0000
     [    4.279603] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.279604] x21: ffff8000117a9000 x20: fffffe0001ca5400
     [    4.279605] x19: ffff8000117db000 x18: 0000000000000000
     [    4.279606] x17: 0000000000000000 x16: 0000000000000000
     [    4.279607] x15: 0000000000000000 x14: 0000000000000000
     [    4.279608] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.279609] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.279610] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.279611] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.279612] x5 : 00000000a0a0a0a0 x4 : ffffa02609b35000
     [    4.279613] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.279614] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.279615] Call trace:
     [    4.279617]  its_cpu_init+0x2f0/0x494
     [    4.279618]  gic_starting_cpu+0x18/0x24
     [    4.279620]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.279621]  notify_cpu_starting+0x9c/0xb8
     [    4.279623]  secondary_start_kernel+0xdc/0x168
     [    4.279624] ---[ end trace f68728a0d3053bc7 ]---
     [    4.279629] GICv3: CPU117: using allocated LPI pending table 
@0x000000007a950000
     [    4.279655] Xen: initializing cpu117
     [    4.279667] CPU117: Booted secondary processor 0x0000000705 
[0x481fd010]
     [    4.308805] Detected VIPT I-cache on CPU118
     [    4.308982] GICv3: CPU118: found redistributor 706 region 
59:0x00000000aa7c0000
     [    4.315763] ------------[ cut here ]------------
     [    4.315766] WARNING: CPU: 118 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.315767] Modules linked in:
     [    4.315769] CPU: 118 PID: 0 Comm: swapper/118 Tainted: G        
W         5.5.0-rc5 #132
     [    4.315771] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.315772] pc : its_cpu_init+0x2f0/0x494
     [    4.315774] lr : its_cpu_init+0x2ec/0x494
     [    4.315774] sp : ffff8000127b3ee0
     [    4.315775] x29: ffff8000127b3ee0 x28: 0000000000000000
     [    4.315776] x27: 0000000000000000 x26: 0000000000000000
     [    4.315777] x25: 0000000000000000 x24: ffff800013b40000
     [    4.315778] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.315779] x21: ffff8000117a9000 x20: fffffe0001ca5800
     [    4.315780] x19: ffff8000117db000 x18: 0000000000000000
     [    4.315781] x17: 0000000000000000 x16: 0000000000000000
     [    4.315782] x15: 0000000000000000 x14: 0000000000000000
     [    4.315783] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.315784] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.315785] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.315786] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.315787] x5 : 00000000a0a0a0a0 x4 : ffffa02609b4b000
     [    4.315788] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.315789] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.315790] Call trace:
     [    4.315791]  its_cpu_init+0x2f0/0x494
     [    4.315793]  gic_starting_cpu+0x18/0x24
     [    4.315794]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.315795]  notify_cpu_starting+0x9c/0xb8
     [    4.315797]  secondary_start_kernel+0xdc/0x168
     [    4.315797] ---[ end trace f68728a0d3053bc8 ]---
     [    4.315802] GICv3: CPU118: using allocated LPI pending table 
@0x000000007a960000
     [    4.315825] Xen: initializing cpu118
     [    4.315837] CPU118: Booted secondary processor 0x0000000706 
[0x481fd010]
     [    4.344902] Detected VIPT I-cache on CPU119
     [    4.345081] GICv3: CPU119: found redistributor 707 region 
59:0x00000000aa7e0000
     [    4.351861] ------------[ cut here ]------------
     [    4.351865] WARNING: CPU: 119 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.351866] Modules linked in:
     [    4.351868] CPU: 119 PID: 0 Comm: swapper/119 Tainted: G        
W         5.5.0-rc5 #132
     [    4.351869] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.351871] pc : its_cpu_init+0x2f0/0x494
     [    4.351873] lr : its_cpu_init+0x2ec/0x494
     [    4.351873] sp : ffff8000127bbee0
     [    4.351874] x29: ffff8000127bbee0 x28: 0000000000000000
     [    4.351875] x27: 0000000000000000 x26: 0000000000000000
     [    4.351876] x25: 0000000000000000 x24: ffff800013b60000
     [    4.351877] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.351878] x21: ffff8000117a9000 x20: fffffe0001ca5c00
     [    4.351879] x19: ffff8000117db000 x18: 0000000000000000
     [    4.351880] x17: 0000000000000000 x16: 0000000000000000
     [    4.351881] x15: 0000000000000000 x14: 0000000000000000
     [    4.351882] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.351883] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.351884] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.351885] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.351886] x5 : 00000000a0a0a0a0 x4 : ffffa02609b61000
     [    4.351887] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.351888] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.351889] Call trace:
     [    4.351891]  its_cpu_init+0x2f0/0x494
     [    4.351892]  gic_starting_cpu+0x18/0x24
     [    4.351894]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.351895]  notify_cpu_starting+0x9c/0xb8
     [    4.351897]  secondary_start_kernel+0xdc/0x168
     [    4.351897] ---[ end trace f68728a0d3053bc9 ]---
     [    4.351903] GICv3: CPU119: using allocated LPI pending table 
@0x000000007a970000
     [    4.351926] Xen: initializing cpu119
     [    4.351937] CPU119: Booted secondary processor 0x0000000707 
[0x481fd010]
     [    4.380990] Detected VIPT I-cache on CPU120
     [    4.381176] GICv3: CPU120: found redistributor 708 region 
60:0x00000000aa800000
     [    4.387967] ------------[ cut here ]------------
     [    4.387971] WARNING: CPU: 120 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.387972] Modules linked in:
     [    4.387974] CPU: 120 PID: 0 Comm: swapper/120 Tainted: G        
W         5.5.0-rc5 #132
     [    4.387975] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.387977] pc : its_cpu_init+0x2f0/0x494
     [    4.387979] lr : its_cpu_init+0x2ec/0x494
     [    4.387979] sp : ffff80001280bee0
     [    4.387980] x29: ffff80001280bee0 x28: 0000000000000000
     [    4.387981] x27: 0000000000000000 x26: 0000000000000000
     [    4.387982] x25: 0000000000000000 x24: ffff800013bc0000
     [    4.387983] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.387984] x21: ffff8000117a9000 x20: fffffe0001ca6000
     [    4.387985] x19: ffff8000117db000 x18: 0000000000000000
     [    4.387986] x17: 0000000000000000 x16: 0000000000000000
     [    4.387987] x15: 0000000000000000 x14: 0000000000000000
     [    4.387988] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.387989] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.387990] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.387991] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.387992] x5 : 00000000a0a0a0a0 x4 : ffffa02609b77000
     [    4.387993] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.387994] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.387995] Call trace:
     [    4.387997]  its_cpu_init+0x2f0/0x494
     [    4.387998]  gic_starting_cpu+0x18/0x24
     [    4.388000]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.388001]  notify_cpu_starting+0x9c/0xb8
     [    4.388002]  secondary_start_kernel+0xdc/0x168
     [    4.388003] ---[ end trace f68728a0d3053bca ]---
     [    4.388009] GICv3: CPU120: using allocated LPI pending table 
@0x000000007a980000
     [    4.388034] Xen: initializing cpu120
     [    4.388048] CPU120: Booted secondary processor 0x0000000708 
[0x481fd010]
     [    4.417091] Detected VIPT I-cache on CPU121
     [    4.417273] GICv3: CPU121: found redistributor 709 region 
60:0x00000000aa820000
     [    4.424054] ------------[ cut here ]------------
     [    4.424058] WARNING: CPU: 121 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.424059] Modules linked in:
     [    4.424061] CPU: 121 PID: 0 Comm: swapper/121 Tainted: G        
W         5.5.0-rc5 #132
     [    4.424063] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.424064] pc : its_cpu_init+0x2f0/0x494
     [    4.424066] lr : its_cpu_init+0x2ec/0x494
     [    4.424066] sp : ffff800012813ee0
     [    4.424067] x29: ffff800012813ee0 x28: 0000000000000000
     [    4.424068] x27: 0000000000000000 x26: 0000000000000000
     [    4.424069] x25: 0000000000000000 x24: ffff800013be0000
     [    4.424070] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.424071] x21: ffff8000117a9000 x20: fffffe0001ca6400
     [    4.424072] x19: ffff8000117db000 x18: 0000000000000000
     [    4.424073] x17: 0000000000000000 x16: 0000000000000000
     [    4.424074] x15: 0000000000000000 x14: 0000000000000000
     [    4.424075] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.424076] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.424077] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.424078] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.424079] x5 : 00000000a0a0a0a0 x4 : ffffa02609b8d000
     [    4.424080] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.424081] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.424082] Call trace:
     [    4.424084]  its_cpu_init+0x2f0/0x494
     [    4.424085]  gic_starting_cpu+0x18/0x24
     [    4.424087]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.424088]  notify_cpu_starting+0x9c/0xb8
     [    4.424090]  secondary_start_kernel+0xdc/0x168
     [    4.424091] ---[ end trace f68728a0d3053bcb ]---
     [    4.424096] GICv3: CPU121: using allocated LPI pending table 
@0x000000007a990000
     [    4.424118] Xen: initializing cpu121
     [    4.424128] CPU121: Booted secondary processor 0x0000000709 
[0x481fd010]
     [    4.453212] Detected VIPT I-cache on CPU122
     [    4.453388] GICv3: CPU122: found redistributor 70a region 
61:0x00000000aa840000
     [    4.460168] ------------[ cut here ]------------
     [    4.460172] WARNING: CPU: 122 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.460172] Modules linked in:
     [    4.460175] CPU: 122 PID: 0 Comm: swapper/122 Tainted: G        
W         5.5.0-rc5 #132
     [    4.460176] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.460178] pc : its_cpu_init+0x2f0/0x494
     [    4.460179] lr : its_cpu_init+0x2ec/0x494
     [    4.460180] sp : ffff80001281bee0
     [    4.460180] x29: ffff80001281bee0 x28: 0000000000000000
     [    4.460182] x27: 0000000000000000 x26: 0000000000000000
     [    4.460183] x25: 0000000000000000 x24: ffff800013c40000
     [    4.460184] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.460185] x21: ffff8000117a9000 x20: fffffe0001ca6800
     [    4.460186] x19: ffff8000117db000 x18: 0000000000000000
     [    4.460187] x17: 0000000000000000 x16: 0000000000000000
     [    4.460188] x15: 0000000000000000 x14: 0000000000000000
     [    4.460189] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.460190] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.460191] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.460192] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.460193] x5 : 00000000a0a0a0a0 x4 : ffffa02609ba3000
     [    4.460194] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.460195] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.460196] Call trace:
     [    4.460197]  its_cpu_init+0x2f0/0x494
     [    4.460199]  gic_starting_cpu+0x18/0x24
     [    4.460200]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.460201]  notify_cpu_starting+0x9c/0xb8
     [    4.460203]  secondary_start_kernel+0xdc/0x168
     [    4.460204] ---[ end trace f68728a0d3053bcc ]---
     [    4.460209] GICv3: CPU122: using allocated LPI pending table 
@0x000000007a9a0000
     [    4.460232] Xen: initializing cpu122
     [    4.460243] CPU122: Booted secondary processor 0x000000070a 
[0x481fd010]
     [    4.489761] Detected VIPT I-cache on CPU123
     [    4.489939] GICv3: CPU123: found redistributor 70b region 
61:0x00000000aa860000
     [    4.496719] ------------[ cut here ]------------
     [    4.496723] WARNING: CPU: 123 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.496724] Modules linked in:
     [    4.496726] CPU: 123 PID: 0 Comm: swapper/123 Tainted: G        
W         5.5.0-rc5 #132
     [    4.496727] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.496729] pc : its_cpu_init+0x2f0/0x494
     [    4.496730] lr : its_cpu_init+0x2ec/0x494
     [    4.496731] sp : ffff800012823ee0
     [    4.496732] x29: ffff800012823ee0 x28: 0000000000000000
     [    4.496733] x27: 0000000000000000 x26: 0000000000000000
     [    4.496734] x25: 0000000000000000 x24: ffff800013c60000
     [    4.496735] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.496736] x21: ffff8000117a9000 x20: fffffe0001ca6c00
     [    4.496737] x19: ffff8000117db000 x18: 0000000000000000
     [    4.496738] x17: 0000000000000000 x16: 0000000000000000
     [    4.496739] x15: 0000000000000000 x14: 0000000000000000
     [    4.496740] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.496741] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.496742] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.496742] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.496744] x5 : 00000000a0a0a0a0 x4 : ffffa02609bb9000
     [    4.496745] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.496745] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.496747] Call trace:
     [    4.496748]  its_cpu_init+0x2f0/0x494
     [    4.496750]  gic_starting_cpu+0x18/0x24
     [    4.496751]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.496752]  notify_cpu_starting+0x9c/0xb8
     [    4.496754]  secondary_start_kernel+0xdc/0x168
     [    4.496755] ---[ end trace f68728a0d3053bcd ]---
     [    4.496760] GICv3: CPU123: using allocated LPI pending table 
@0x000000007a9b0000
     [    4.496782] Xen: initializing cpu123
     [    4.496792] CPU123: Booted secondary processor 0x000000070b 
[0x481fd010]
     [    4.525850] Detected VIPT I-cache on CPU124
     [    4.526033] GICv3: CPU124: found redistributor 70c region 
62:0x00000000aa880000
     [    4.532824] ------------[ cut here ]------------
     [    4.532829] WARNING: CPU: 124 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.532829] Modules linked in:
     [    4.532832] CPU: 124 PID: 0 Comm: swapper/124 Tainted: G        
W         5.5.0-rc5 #132
     [    4.532833] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.532835] pc : its_cpu_init+0x2f0/0x494
     [    4.532836] lr : its_cpu_init+0x2ec/0x494
     [    4.532837] sp : ffff80001282bee0
     [    4.532838] x29: ffff80001282bee0 x28: 0000000000000000
     [    4.532839] x27: 0000000000000000 x26: 0000000000000000
     [    4.532840] x25: 0000000000000000 x24: ffff800013cc0000
     [    4.532841] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.532842] x21: ffff8000117a9000 x20: fffffe0001ca7000
     [    4.532843] x19: ffff8000117db000 x18: 0000000000000000
     [    4.532844] x17: 0000000000000000 x16: 0000000000000000
     [    4.532845] x15: 0000000000000000 x14: 0000000000000000
     [    4.532846] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.532847] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.532848] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.532849] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.532849] x5 : 00000000a0a0a0a0 x4 : ffffa02609bcf000
     [    4.532850] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.532851] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.532853] Call trace:
     [    4.532854]  its_cpu_init+0x2f0/0x494
     [    4.532856]  gic_starting_cpu+0x18/0x24
     [    4.532857]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.532859]  notify_cpu_starting+0x9c/0xb8
     [    4.532861]  secondary_start_kernel+0xdc/0x168
     [    4.532862] ---[ end trace f68728a0d3053bce ]---
     [    4.532867] GICv3: CPU124: using allocated LPI pending table 
@0x000000007a9c0000
     [    4.532892] Xen: initializing cpu124
     [    4.532906] CPU124: Booted secondary processor 0x000000070c 
[0x481fd010]
     [    4.561949] Detected VIPT I-cache on CPU125
     [    4.562125] GICv3: CPU125: found redistributor 70d region 
62:0x00000000aa8a0000
     [    4.568906] ------------[ cut here ]------------
     [    4.568910] WARNING: CPU: 125 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.568910] Modules linked in:
     [    4.568913] CPU: 125 PID: 0 Comm: swapper/125 Tainted: G        
W         5.5.0-rc5 #132
     [    4.568914] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.568916] pc : its_cpu_init+0x2f0/0x494
     [    4.568917] lr : its_cpu_init+0x2ec/0x494
     [    4.568918] sp : ffff800012833ee0
     [    4.568918] x29: ffff800012833ee0 x28: 0000000000000000
     [    4.568920] x27: 0000000000000000 x26: 0000000000000000
     [    4.568921] x25: 0000000000000000 x24: ffff800013ce0000
     [    4.568922] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.568923] x21: ffff8000117a9000 x20: fffffe0001ca7400
     [    4.568924] x19: ffff8000117db000 x18: 0000000000000000
     [    4.568925] x17: 0000000000000000 x16: 0000000000000000
     [    4.568926] x15: 0000000000000000 x14: 0000000000000000
     [    4.568926] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.568927] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.568928] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.568929] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.568930] x5 : 00000000a0a0a0a0 x4 : ffffa02609be5000
     [    4.568931] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.568932] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.568933] Call trace:
     [    4.568935]  its_cpu_init+0x2f0/0x494
     [    4.568936]  gic_starting_cpu+0x18/0x24
     [    4.568938]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.568939]  notify_cpu_starting+0x9c/0xb8
     [    4.568941]  secondary_start_kernel+0xdc/0x168
     [    4.568941] ---[ end trace f68728a0d3053bcf ]---
     [    4.568946] GICv3: CPU125: using allocated LPI pending table 
@0x000000007a9d0000
     [    4.568969] Xen: initializing cpu125
     [    4.568979] CPU125: Booted secondary processor 0x000000070d 
[0x481fd010]
     [    4.598020] Detected VIPT I-cache on CPU126
     [    4.598196] GICv3: CPU126: found redistributor 70e region 
63:0x00000000aa8c0000
     [    4.604976] ------------[ cut here ]------------
     [    4.604980] WARNING: CPU: 126 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.604980] Modules linked in:
     [    4.604983] CPU: 126 PID: 0 Comm: swapper/126 Tainted: G        
W         5.5.0-rc5 #132
     [    4.604984] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.604986] pc : its_cpu_init+0x2f0/0x494
     [    4.604987] lr : its_cpu_init+0x2ec/0x494
     [    4.604988] sp : ffff80001288bee0
     [    4.604988] x29: ffff80001288bee0 x28: 0000000000000000
     [    4.604990] x27: 0000000000000000 x26: 0000000000000000
     [    4.604991] x25: 0000000000000000 x24: ffff800013d40000
     [    4.604992] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.604993] x21: ffff8000117a9000 x20: fffffe0001ca7800
     [    4.604994] x19: ffff8000117db000 x18: 0000000000000000
     [    4.604995] x17: 0000000000000000 x16: 0000000000000000
     [    4.604996] x15: 0000000000000000 x14: 0000000000000000
     [    4.604997] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.604998] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.604999] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.605000] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.605000] x5 : 00000000a0a0a0a0 x4 : ffffa02609bfb000
     [    4.605001] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.605003] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.605004] Call trace:
     [    4.605005]  its_cpu_init+0x2f0/0x494
     [    4.605007]  gic_starting_cpu+0x18/0x24
     [    4.605008]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.605009]  notify_cpu_starting+0x9c/0xb8
     [    4.605011]  secondary_start_kernel+0xdc/0x168
     [    4.605012] ---[ end trace f68728a0d3053bd0 ]---
     [    4.605017] GICv3: CPU126: using allocated LPI pending table 
@0x000000007a9e0000
     [    4.605039] Xen: initializing cpu126
     [    4.605050] CPU126: Booted secondary processor 0x000000070e 
[0x481fd010]
     [    4.634122] Detected VIPT I-cache on CPU127
     [    4.634300] GICv3: CPU127: found redistributor 70f region 
63:0x00000000aa8e0000
     [    4.641081] ------------[ cut here ]------------
     [    4.641085] WARNING: CPU: 127 PID: 0 at 
/home/joyx/plinth-kernel-v200/drivers/irqchip/irq-gic-v3-its.c:2304 
its_cpu_init+0x2f0/0x494
     [    4.641085] Modules linked in:
     [    4.641087] CPU: 127 PID: 0 Comm: swapper/127 Tainted: G        
W         5.5.0-rc5 #132
     [    4.641089] pstate: 600001c5 (nZCv dAIF -PAN -UAO)
     [    4.641090] pc : its_cpu_init+0x2f0/0x494
     [    4.641092] lr : its_cpu_init+0x2ec/0x494
     [    4.641092] sp : ffff800012893ee0
     [    4.641093] x29: ffff800012893ee0 x28: 0000000000000000
     [    4.641094] x27: 0000000000000000 x26: 0000000000000000
     [    4.641095] x25: 0000000000000000 x24: ffff800013d60000
     [    4.641096] x23: ffff8000111f4000 x22: ffff8000119cd000
     [    4.641097] x21: ffff8000117a9000 x20: fffffe0001ca7c00
     [    4.641098] x19: ffff8000117db000 x18: 0000000000000000
     [    4.641099] x17: 0000000000000000 x16: 0000000000000000
     [    4.641100] x15: 0000000000000000 x14: 0000000000000000
     [    4.641101] x13: 0000000000000000 x12: d42e0f3da59c6200
     [    4.641102] x11: ffffffffffffffff x10: ffff8000119916a0
     [    4.641103] x9 : 0000000000000000 x8 : ffff8000119916a0
     [    4.641104] x7 : 0000000000000000 x6 : 0000000000000070
     [    4.641105] x5 : 00000000a0a0a0a0 x4 : ffffa02609c11000
     [    4.641106] x3 : 000000000000003d x2 : ffffffffffffffff
     [    4.641107] x1 : 0000000000010000 x0 : 00000000ffffffed
     [    4.641108] Call trace:
     [    4.641109]  its_cpu_init+0x2f0/0x494
     [    4.641110]  gic_starting_cpu+0x18/0x24
     [    4.641112]  cpuhp_invoke_callback+0x84/0x1e0
     [    4.641113]  notify_cpu_starting+0x9c/0xb8
     [    4.641115]  secondary_start_kernel+0xdc/0x168
     [    4.641115] ---[ end trace f68728a0d3053bd1 ]---
     [    4.641121] GICv3: CPU127: using allocated LPI pending table 
@0x000000007a9f0000
     [    4.641142] Xen: initializing cpu127
     [    4.641153] CPU127: Booted secondary processor 0x000000070f 
[0x481fd010]
     [    4.641270] smp: Brought up 4 nodes, 128 CPUs
     [    4.642862] SMP: Total of 128 processors activated.
     [    4.642864] CPU features: detected: Privileged Access Never
     [    4.642865] CPU features: detected: User Access Override
     [    4.642867] CPU features: detected: Common not Private translations
     [    4.642868] CPU features: detected: RAS Extension Support
     [    4.642869] CPU features: detected: CRC32 instructions
     [    4.652755] CPU: All CPU(s) started at EL1
     [    4.653957] alternatives: patching kernel code
     [    4.665503] devtmpfs: initialized
     [    4.665735] KASLR disabled due to lack of seed
     [    4.668260] clocksource: jiffies: mask: 0xffffffff max_cycles: 
0xffffffff, max_idle_ns: 7645041785100000 ns
     [    4.668339] futex hash table entries: 32768 (order: 9, 2097152 
bytes, vmalloc)
     [    4.672888] pinctrl core: initialized pinctrl subsystem
     [    4.673052] thermal_sys: Registered thermal governor 'step_wise'
     [    4.673053] thermal_sys: Registered thermal governor 
'power_allocator'
     [    4.673061] DMI not present or invalid.
     [    4.673189] NET: Registered protocol family 16
     [    4.681640] DMA: preallocated 256 KiB pool for atomic allocations
     [    4.681644] audit: initializing netlink subsys (disabled)
     [    4.681726] audit: type=2000 audit(4.668:1): state=initialized 
audit_enabled=0 res=1
     [    4.681971] Detected 1 PCC Subspaces
     [    4.681990] Registering PCC driver as Mailbox controller
     [    4.682039] hw-breakpoint: found 6 breakpoint and 4 watchpoint 
registers.
     [    4.687352] ACPI: bus type PCI registered
     [    4.687354] acpiphp: ACPI Hot Plug PCI Controller Driver 
version: 0.5
     [    4.687436] Serial: AMBA PL011 UART driver
     [    4.691838] HugeTLB registered 1.00 GiB page size, pre-allocated 
0 pages
     [    4.691840] HugeTLB registered 32.0 MiB page size, pre-allocated 
0 pages
     [    4.691842] HugeTLB registered 2.00 MiB page size, pre-allocated 
0 pages
     [    4.691843] HugeTLB registered 64.0 KiB page size, pre-allocated 
0 pages
     [    4.695783] cryptd: max_cpu_qlen set to 1000
     [    4.703954] ACPI: Added _OSI(Module Device)
     [    4.703956] ACPI: Added _OSI(Processor Device)
     [    4.703958] ACPI: Added _OSI(3.0 _SCP Extensions)
     [    4.703959] ACPI: Added _OSI(Processor Aggregator Device)
     [    4.703961] ACPI: Added _OSI(Linux-Dell-Video)
     [    4.703962] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
     [    4.703964] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
     [    4.710599] ACPI: 2 ACPI AML tables successfully acquired and loaded
     [    4.713286] ACPI: Interpreter enabled
     [    4.713289] ACPI: Using GIC for interrupt routing
     [    4.713299] ACPI: MCFG table detected, 1 entries
     [    4.713578] HEST: Table parsing has been initialized.
     [    4.734150] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3f])
     [    4.734156] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig 
ASPM ClockPM Segments MSI HPX-Type3]
     [    4.734242] acpi PNP0A08:00: _OSC: platform does not support [LTR]
     [    4.734312] acpi PNP0A08:00: _OSC: OS now controls [PME AER 
PCIeCapability]
     [    4.735703] acpi PNP0A08:00: [Firmware Bug]: ECAM area [mem 
0xd0000000-0xd3ffffff] not reserved in ACPI namespace
     [    4.735713] acpi PNP0A08:00: ECAM at [mem 0xd0000000-0xd3ffffff] 
for [bus 00-3f]
     [    4.735733] Remapped I/O 0x00000000efff0000 to [io 0x0000-0xffff 
window]
     [    4.735777] PCI host bridge to bus 0000:00
     [    4.735780] pci_bus 0000:00: root bus resource [mem 
0x80000000000-0x83fffffffff pref window]
     [    4.735782] pci_bus 0000:00: root bus resource [mem 
0xe0000000-0xeffeffff window]
     [    4.735783] pci_bus 0000:00: root bus resource [io 0x0000-0xffff 
window]
     [    4.735785] pci_bus 0000:00: root bus resource [bus 00-3f]
     [    4.735825] pci 0000:00:00.0: [19e5:a120] type 01 class 0x060400
     [    4.735880] pci 0000:00:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.746080] pci 0000:00:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.746099] pci 0000:00:08.0: [19e5:a120] type 01 class 0x060400
     [    4.746146] pci 0000:00:08.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.751202] pci 0000:00:08.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.751217] pci 0000:00:0c.0: [19e5:a120] type 01 class 0x060400
     [    4.751263] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.756346] pci 0000:00:0c.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.756360] pci 0000:00:10.0: [19e5:a120] type 01 class 0x060400
     [    4.756407] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.761463] pci 0000:00:10.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.761473] pci 0000:00:11.0: [19e5:a120] type 01 class 0x060400
     [    4.761518] pci 0000:00:11.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.766603] pci 0000:00:11.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.766614] pci 0000:00:12.0: [19e5:a120] type 01 class 0x060400
     [    4.766660] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.771717] pci 0000:00:12.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.771761] pci 0000:01:00.0: [19e5:371e] type 01 class 0x060400
     [    4.771824] pci 0000:01:00.0: supports D1 D2
     [    4.771826] pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.776918] pci 0000:01:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.776961] pci 0000:02:00.0: [19e5:371e] type 01 class 0x060400
     [    4.777027] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.782087] pci 0000:02:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.782099] pci 0000:02:01.0: [19e5:371e] type 01 class 0x060400
     [    4.782165] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.787245] pci 0000:02:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.787258] pci 0000:02:02.0: [19e5:371e] type 01 class 0x060400
     [    4.787324] pci 0000:02:02.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.792383] pci 0000:02:02.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.792397] pci 0000:02:03.0: [19e5:371e] type 01 class 0x060400
     [    4.792464] pci 0000:02:03.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.797551] pci 0000:02:03.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.797620] pci 0000:03:00.0: [19e5:1822] type 00 class 0x020000
     [    4.797634] pci 0000:03:00.0: reg 0x10: [mem 
0x8001fd00000-0x8001fd1ffff 64bit pref]
     [    4.797639] pci 0000:03:00.0: reg 0x18: [mem 
0x8001ff00000-0x8001ff07fff 64bit pref]
     [    4.797645] pci 0000:03:00.0: reg 0x20: [mem 
0x8001fc00000-0x8001fcfffff 64bit pref]
     [    4.797648] pci 0000:03:00.0: reg 0x30: [mem 
0xe6a00000-0xe6afffff pref]
     [    4.797708] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.797723] pci 0000:03:00.0: reg 0x224: [mem 
0x8001ff08000-0x8001ff0bfff 64bit pref]
     [    4.797725] pci 0000:03:00.0: VF(n) BAR0 space: [mem 
0x8001ff08000-0x8001fff7fff 64bit pref] (contains BAR0 for 60 VFs)
     [    4.797731] pci 0000:03:00.0: reg 0x22c: [mem 
0x8001fd20000-0x8001fd27fff 64bit pref]
     [    4.797733] pci 0000:03:00.0: VF(n) BAR2 space: [mem 
0x8001fd20000-0x8001fefffff 64bit pref] (contains BAR2 for 60 VFs)
     [    4.797738] pci 0000:03:00.0: reg 0x234: [mem 
0x8001c000000-0x8001c0fffff 64bit pref]
     [    4.797740] pci 0000:03:00.0: VF(n) BAR4 space: [mem 
0x8001c000000-0x8001fbfffff 64bit pref] (contains BAR4 for 60 VFs)
     [    4.802898] pci 0000:03:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.802941] pci 0000:04:00.0: [19e5:1822] type 00 class 0x020000
     [    4.802954] pci 0000:04:00.0: reg 0x10: [mem 
0x8001bd00000-0x8001bd1ffff 64bit pref]
     [    4.802960] pci 0000:04:00.0: reg 0x18: [mem 
0x8001bf00000-0x8001bf07fff 64bit pref]
     [    4.802965] pci 0000:04:00.0: reg 0x20: [mem 
0x8001bc00000-0x8001bcfffff 64bit pref]
     [    4.802969] pci 0000:04:00.0: reg 0x30: [mem 
0xe6900000-0xe69fffff pref]
     [    4.803028] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.803042] pci 0000:04:00.0: reg 0x224: [mem 
0x8001bf08000-0x8001bf0bfff 64bit pref]
     [    4.803045] pci 0000:04:00.0: VF(n) BAR0 space: [mem 
0x8001bf08000-0x8001bff7fff 64bit pref] (contains BAR0 for 60 VFs)
     [    4.803050] pci 0000:04:00.0: reg 0x22c: [mem 
0x8001bd20000-0x8001bd27fff 64bit pref]
     [    4.803052] pci 0000:04:00.0: VF(n) BAR2 space: [mem 
0x8001bd20000-0x8001befffff 64bit pref] (contains BAR2 for 60 VFs)
     [    4.803058] pci 0000:04:00.0: reg 0x234: [mem 
0x80018000000-0x800180fffff 64bit pref]
     [    4.803059] pci 0000:04:00.0: VF(n) BAR4 space: [mem 
0x80018000000-0x8001bbfffff 64bit pref] (contains BAR4 for 60 VFs)
     [    4.808192] pci 0000:04:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.808231] pci 0000:05:00.0: [19e5:1822] type 00 class 0x020000
     [    4.808244] pci 0000:05:00.0: reg 0x10: [mem 
0x80017d00000-0x80017d1ffff 64bit pref]
     [    4.808250] pci 0000:05:00.0: reg 0x18: [mem 
0x80017f00000-0x80017f07fff 64bit pref]
     [    4.808255] pci 0000:05:00.0: reg 0x20: [mem 
0x80017c00000-0x80017cfffff 64bit pref]
     [    4.808258] pci 0000:05:00.0: reg 0x30: [mem 
0xe6800000-0xe68fffff pref]
     [    4.808317] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.808332] pci 0000:05:00.0: reg 0x224: [mem 
0x80017f08000-0x80017f0bfff 64bit pref]
     [    4.808334] pci 0000:05:00.0: VF(n) BAR0 space: [mem 
0x80017f08000-0x80017ff7fff 64bit pref] (contains BAR0 for 60 VFs)
     [    4.808339] pci 0000:05:00.0: reg 0x22c: [mem 
0x80017d20000-0x80017d27fff 64bit pref]
     [    4.808341] pci 0000:05:00.0: VF(n) BAR2 space: [mem 
0x80017d20000-0x80017efffff 64bit pref] (contains BAR2 for 60 VFs)
     [    4.808346] pci 0000:05:00.0: reg 0x234: [mem 
0x80014000000-0x800140fffff 64bit pref]
     [    4.808348] pci 0000:05:00.0: VF(n) BAR4 space: [mem 
0x80014000000-0x80017bfffff 64bit pref] (contains BAR4 for 60 VFs)
     [    4.813502] pci 0000:05:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.813545] pci 0000:06:00.0: [19e5:1822] type 00 class 0x020000
     [    4.813558] pci 0000:06:00.0: reg 0x10: [mem 
0x80013d00000-0x80013d1ffff 64bit pref]
     [    4.813564] pci 0000:06:00.0: reg 0x18: [mem 
0x80013f00000-0x80013f07fff 64bit pref]
     [    4.813569] pci 0000:06:00.0: reg 0x20: [mem 
0x80013c00000-0x80013cfffff 64bit pref]
     [    4.813573] pci 0000:06:00.0: reg 0x30: [mem 
0xe6700000-0xe67fffff pref]
     [    4.813631] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.813647] pci 0000:06:00.0: reg 0x224: [mem 
0x80013f08000-0x80013f0bfff 64bit pref]
     [    4.813649] pci 0000:06:00.0: VF(n) BAR0 space: [mem 
0x80013f08000-0x80013ff7fff 64bit pref] (contains BAR0 for 60 VFs)
     [    4.813654] pci 0000:06:00.0: reg 0x22c: [mem 
0x80013d20000-0x80013d27fff 64bit pref]
     [    4.813656] pci 0000:06:00.0: VF(n) BAR2 space: [mem 
0x80013d20000-0x80013efffff 64bit pref] (contains BAR2 for 60 VFs)
     [    4.813661] pci 0000:06:00.0: reg 0x234: [mem 
0x80010000000-0x800100fffff 64bit pref]
     [    4.813663] pci 0000:06:00.0: VF(n) BAR4 space: [mem 
0x80010000000-0x80013bfffff 64bit pref] (contains BAR4 for 60 VFs)
     [    4.818794] pci 0000:06:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.818859] pci 0000:08:00.0: [19e5:371e] type 01 class 0x060400
     [    4.818924] pci 0000:08:00.0: supports D1 D2
     [    4.818926] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.818940] pci 0000:08:00.0: 63.008 Gb/s available PCIe 
bandwidth, limited by 8 GT/s x8 link at 0000:00:0c.0 (capable of 126.016 
Gb/s with 8 GT/s x16 link)
     [    4.824024] pci 0000:08:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.824061] pci 0000:09:00.0: [19e5:371e] type 01 class 0x060400
     [    4.824131] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.829191] pci 0000:09:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.829204] pci 0000:09:01.0: [19e5:371e] type 01 class 0x060400
     [    4.829271] pci 0000:09:01.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.834360] pci 0000:09:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.834373] pci 0000:09:02.0: [19e5:371e] type 01 class 0x060400
     [    4.834440] pci 0000:09:02.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.839499] pci 0000:09:02.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.839512] pci 0000:09:03.0: [19e5:371e] type 01 class 0x060400
     [    4.839579] pci 0000:09:03.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.844663] pci 0000:09:03.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.844730] pci 0000:0a:00.0: [19e5:1822] type 00 class 0x020000
     [    4.844744] pci 0000:0a:00.0: reg 0x10: [mem 
0x8000fd00000-0x8000fd1ffff 64bit pref]
     [    4.844749] pci 0000:0a:00.0: reg 0x18: [mem 
0x8000ff00000-0x8000ff07fff 64bit pref]
     [    4.844755] pci 0000:0a:00.0: reg 0x20: [mem 
0x8000fc00000-0x8000fcfffff 64bit pref]
     [    4.844759] pci 0000:0a:00.0: reg 0x30: [mem 
0xe6600000-0xe66fffff pref]
     [    4.844819] pci 0000:0a:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.844835] pci 0000:0a:00.0: reg 0x224: [mem 
0x8000ff08000-0x8000ff0bfff 64bit pref]
     [    4.844837] pci 0000:0a:00.0: VF(n) BAR0 space: [mem 
0x8000ff08000-0x8000fff7fff 64bit pref] (contains BAR0 for 60 VFs)
     [    4.844843] pci 0000:0a:00.0: reg 0x22c: [mem 
0x8000fd20000-0x8000fd27fff 64bit pref]
     [    4.844845] pci 0000:0a:00.0: VF(n) BAR2 space: [mem 
0x8000fd20000-0x8000fefffff 64bit pref] (contains BAR2 for 60 VFs)
     [    4.844851] pci 0000:0a:00.0: reg 0x234: [mem 
0x8000c000000-0x8000c0fffff 64bit pref]
     [    4.844853] pci 0000:0a:00.0: VF(n) BAR4 space: [mem 
0x8000c000000-0x8000fbfffff 64bit pref] (contains BAR4 for 60 VFs)
     [    4.844941] pci 0000:0a:00.0: 63.008 Gb/s available PCIe 
bandwidth, limited by 8 GT/s x8 link at 0000:00:0c.0 (capable of 126.016 
Gb/s with 8 GT/s x16 link)
     [    4.849990] pci 0000:0a:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.850030] pci 0000:0b:00.0: [19e5:1822] type 00 class 0x020000
     [    4.850043] pci 0000:0b:00.0: reg 0x10: [mem 
0x8000bd00000-0x8000bd1ffff 64bit pref]
     [    4.850049] pci 0000:0b:00.0: reg 0x18: [mem 
0x8000bf00000-0x8000bf07fff 64bit pref]
     [    4.850054] pci 0000:0b:00.0: reg 0x20: [mem 
0x8000bc00000-0x8000bcfffff 64bit pref]
     [    4.850058] pci 0000:0b:00.0: reg 0x30: [mem 
0xe6500000-0xe65fffff pref]
     [    4.850118] pci 0000:0b:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.850134] pci 0000:0b:00.0: reg 0x224: [mem 
0x8000bf08000-0x8000bf0bfff 64bit pref]
     [    4.850136] pci 0000:0b:00.0: VF(n) BAR0 space: [mem 
0x8000bf08000-0x8000bff7fff 64bit pref] (contains BAR0 for 60 VFs)
     [    4.850141] pci 0000:0b:00.0: reg 0x22c: [mem 
0x8000bd20000-0x8000bd27fff 64bit pref]
     [    4.850143] pci 0000:0b:00.0: VF(n) BAR2 space: [mem 
0x8000bd20000-0x8000befffff 64bit pref] (contains BAR2 for 60 VFs)
     [    4.850149] pci 0000:0b:00.0: reg 0x234: [mem 
0x80008000000-0x800080fffff 64bit pref]
     [    4.850150] pci 0000:0b:00.0: VF(n) BAR4 space: [mem 
0x80008000000-0x8000bbfffff 64bit pref] (contains BAR4 for 60 VFs)
     [    4.850239] pci 0000:0b:00.0: 63.008 Gb/s available PCIe 
bandwidth, limited by 8 GT/s x8 link at 0000:00:0c.0 (capable of 126.016 
Gb/s with 8 GT/s x16 link)
     [    4.855318] pci 0000:0b:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.855364] pci 0000:0c:00.0: [19e5:1822] type 00 class 0x020000
     [    4.855377] pci 0000:0c:00.0: reg 0x10: [mem 
0x80007d00000-0x80007d1ffff 64bit pref]
     [    4.855383] pci 0000:0c:00.0: reg 0x18: [mem 
0x80007f00000-0x80007f07fff 64bit pref]
     [    4.855388] pci 0000:0c:00.0: reg 0x20: [mem 
0x80007c00000-0x80007cfffff 64bit pref]
     [    4.855392] pci 0000:0c:00.0: reg 0x30: [mem 
0xe6400000-0xe64fffff pref]
     [    4.855454] pci 0000:0c:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.855470] pci 0000:0c:00.0: reg 0x224: [mem 
0x80007f08000-0x80007f0bfff 64bit pref]
     [    4.855472] pci 0000:0c:00.0: VF(n) BAR0 space: [mem 
0x80007f08000-0x80007ff7fff 64bit pref] (contains BAR0 for 60 VFs)
     [    4.855477] pci 0000:0c:00.0: reg 0x22c: [mem 
0x80007d20000-0x80007d27fff 64bit pref]
     [    4.855479] pci 0000:0c:00.0: VF(n) BAR2 space: [mem 
0x80007d20000-0x80007efffff 64bit pref] (contains BAR2 for 60 VFs)
     [    4.855485] pci 0000:0c:00.0: reg 0x234: [mem 
0x80004000000-0x800040fffff 64bit pref]
     [    4.855486] pci 0000:0c:00.0: VF(n) BAR4 space: [mem 
0x80004000000-0x80007bfffff 64bit pref] (contains BAR4 for 60 VFs)
     [    4.855575] pci 0000:0c:00.0: 63.008 Gb/s available PCIe 
bandwidth, limited by 8 GT/s x8 link at 0000:00:0c.0 (capable of 126.016 
Gb/s with 8 GT/s x16 link)
     [    4.860623] pci 0000:0c:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.860664] pci 0000:0d:00.0: [19e5:1822] type 00 class 0x020000
     [    4.860677] pci 0000:0d:00.0: reg 0x10: [mem 
0x80003d00000-0x80003d1ffff 64bit pref]
     [    4.860682] pci 0000:0d:00.0: reg 0x18: [mem 
0x80003f00000-0x80003f07fff 64bit pref]
     [    4.860688] pci 0000:0d:00.0: reg 0x20: [mem 
0x80003c00000-0x80003cfffff 64bit pref]
     [    4.860691] pci 0000:0d:00.0: reg 0x30: [mem 
0xe6300000-0xe63fffff pref]
     [    4.860752] pci 0000:0d:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.860767] pci 0000:0d:00.0: reg 0x224: [mem 
0x80003f08000-0x80003f0bfff 64bit pref]
     [    4.860769] pci 0000:0d:00.0: VF(n) BAR0 space: [mem 
0x80003f08000-0x80003ff7fff 64bit pref] (contains BAR0 for 60 VFs)
     [    4.860775] pci 0000:0d:00.0: reg 0x22c: [mem 
0x80003d20000-0x80003d27fff 64bit pref]
     [    4.860777] pci 0000:0d:00.0: VF(n) BAR2 space: [mem 
0x80003d20000-0x80003efffff 64bit pref] (contains BAR2 for 60 VFs)
     [    4.860782] pci 0000:0d:00.0: reg 0x234: [mem 
0x80000000000-0x800000fffff 64bit pref]
     [    4.860784] pci 0000:0d:00.0: VF(n) BAR4 space: [mem 
0x80000000000-0x80003bfffff 64bit pref] (contains BAR4 for 60 VFs)
     [    4.860873] pci 0000:0d:00.0: 63.008 Gb/s available PCIe 
bandwidth, limited by 8 GT/s x8 link at 0000:00:0c.0 (capable of 126.016 
Gb/s with 8 GT/s x16 link)
     [    4.865951] pci 0000:0d:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.866014] pci 0000:0e:00.0: [19e5:1710] type 00 class 0x118000
     [    4.866039] pci 0000:0e:00.0: reg 0x10: [mem 
0xe0000000-0xe3ffffff pref]
     [    4.866048] pci 0000:0e:00.0: reg 0x14: [mem 0xe6200000-0xe62fffff]
     [    4.866192] pci 0000:0e:00.0: supports D1
     [    4.866194] pci 0000:0e:00.0: PME# supported from D0 D1 D3hot
     [    4.871282] pci 0000:0e:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.871331] pci 0000:0f:00.0: [19e5:1711] type 00 class 0x030000
     [    4.871361] pci 0000:0f:00.0: reg 0x10: [mem 
0xe4000000-0xe5ffffff pref]
     [    4.871373] pci 0000:0f:00.0: reg 0x14: [mem 0xe6000000-0xe61fffff]
     [    4.871546] pci 0000:0f:00.0: supports D1
     [    4.871548] pci 0000:0f:00.0: PME# supported from D0 D1 D3hot
     [    4.876748] pci 0000:0f:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.876804] pci 0000:02:00.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 03] add_size 3e00000 add_align 
100000
     [    4.876808] pci 0000:02:01.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 04] add_size 3e00000 add_align 
100000
     [    4.876811] pci 0000:02:02.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 05] add_size 3e00000 add_align 
100000
     [    4.876814] pci 0000:02:03.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 06] add_size 3e00000 add_align 
100000
     [    4.876817] pci 0000:01:00.0: bridge window [mem 
0x00100000-0x008fffff 64bit pref] to [bus 02-06] add_size f800000 
add_align 100000
     [    4.876820] pci 0000:00:00.0: bridge window [mem 
0x00100000-0x008fffff 64bit pref] to [bus 01-06] add_size f800000 
add_align 100000
     [    4.876824] pci 0000:09:00.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 0a] add_size 3e00000 add_align 
100000
     [    4.876828] pci 0000:09:01.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 0b] add_size 3e00000 add_align 
100000
     [    4.876831] pci 0000:09:02.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 0c] add_size 3e00000 add_align 
100000
     [    4.876835] pci 0000:09:03.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 0d] add_size 3e00000 add_align 
100000
     [    4.876838] pci 0000:08:00.0: bridge window [mem 
0x00100000-0x008fffff 64bit pref] to [bus 09-0d] add_size f800000 
add_align 100000
     [    4.876841] pci 0000:00:0c.0: bridge window [mem 
0x00100000-0x008fffff 64bit pref] to [bus 08-0d] add_size f800000 
add_align 100000
     [    4.876849] pci 0000:00:10.0: BAR 14: assigned [mem 
0xe0000000-0xe5ffffff]
     [    4.876851] pci 0000:00:11.0: BAR 14: assigned [mem 
0xe6000000-0xe8ffffff]
     [    4.876853] pci 0000:00:00.0: BAR 14: assigned [mem 
0xe9000000-0xe93fffff]
     [    4.876855] pci 0000:00:00.0: BAR 15: assigned [mem 
0x80000000000-0x8000fffffff 64bit pref]
     [    4.876857] pci 0000:00:0c.0: BAR 14: assigned [mem 
0xe9400000-0xe97fffff]
     [    4.876859] pci 0000:00:0c.0: BAR 15: assigned [mem 
0x80010000000-0x8001fffffff 64bit pref]
     [    4.876862] pci 0000:01:00.0: BAR 14: assigned [mem 
0xe9000000-0xe93fffff]
     [    4.876864] pci 0000:01:00.0: BAR 15: assigned [mem 
0x80000000000-0x8000fffffff 64bit pref]
     [    4.876868] pci 0000:02:00.0: BAR 14: assigned [mem 
0xe9000000-0xe90fffff]
     [    4.876870] pci 0000:02:00.0: BAR 15: assigned [mem 
0x80000000000-0x80003ffffff 64bit pref]
     [    4.876872] pci 0000:02:01.0: BAR 14: assigned [mem 
0xe9100000-0xe91fffff]
     [    4.876873] pci 0000:02:01.0: BAR 15: assigned [mem 
0x80004000000-0x80007ffffff 64bit pref]
     [    4.876875] pci 0000:02:02.0: BAR 14: assigned [mem 
0xe9200000-0xe92fffff]
     [    4.876877] pci 0000:02:02.0: BAR 15: assigned [mem 
0x80008000000-0x8000bffffff 64bit pref]
     [    4.876878] pci 0000:02:03.0: BAR 14: assigned [mem 
0xe9300000-0xe93fffff]
     [    4.876880] pci 0000:02:03.0: BAR 15: assigned [mem 
0x8000c000000-0x8000fffffff 64bit pref]
     [    4.876883] pci 0000:03:00.0: BAR 4: assigned [mem 
0x80000000000-0x800000fffff 64bit pref]
     [    4.876888] pci 0000:03:00.0: BAR 6: assigned [mem 
0xe9000000-0xe90fffff pref]
     [    4.876890] pci 0000:03:00.0: BAR 11: assigned [mem 
0x80000100000-0x80003cfffff 64bit pref]
     [    4.876893] pci 0000:03:00.0: BAR 0: assigned [mem 
0x80003d00000-0x80003d1ffff 64bit pref]
     [    4.876898] pci 0000:03:00.0: BAR 2: assigned [mem 
0x80003d20000-0x80003d27fff 64bit pref]
     [    4.876902] pci 0000:03:00.0: BAR 9: assigned [mem 
0x80003d28000-0x80003f07fff 64bit pref]
     [    4.876906] pci 0000:03:00.0: BAR 7: assigned [mem 
0x80003f08000-0x80003ff7fff 64bit pref]
     [    4.876910] pci 0000:02:00.0: PCI bridge to [bus 03]
     [    4.876913] pci 0000:02:00.0:   bridge window [mem 
0xe9000000-0xe90fffff]
     [    4.876916] pci 0000:02:00.0:   bridge window [mem 
0x80000000000-0x80003ffffff 64bit pref]
     [    4.876920] pci 0000:04:00.0: BAR 4: assigned [mem 
0x80004000000-0x800040fffff 64bit pref]
     [    4.876925] pci 0000:04:00.0: BAR 6: assigned [mem 
0xe9100000-0xe91fffff pref]
     [    4.876927] pci 0000:04:00.0: BAR 11: assigned [mem 
0x80004100000-0x80007cfffff 64bit pref]
     [    4.876930] pci 0000:04:00.0: BAR 0: assigned [mem 
0x80007d00000-0x80007d1ffff 64bit pref]
     [    4.876934] pci 0000:04:00.0: BAR 2: assigned [mem 
0x80007d20000-0x80007d27fff 64bit pref]
     [    4.876939] pci 0000:04:00.0: BAR 9: assigned [mem 
0x80007d28000-0x80007f07fff 64bit pref]
     [    4.876942] pci 0000:04:00.0: BAR 7: assigned [mem 
0x80007f08000-0x80007ff7fff 64bit pref]
     [    4.876946] pci 0000:02:01.0: PCI bridge to [bus 04]
     [    4.876949] pci 0000:02:01.0:   bridge window [mem 
0xe9100000-0xe91fffff]
     [    4.876951] pci 0000:02:01.0:   bridge window [mem 
0x80004000000-0x80007ffffff 64bit pref]
     [    4.876956] pci 0000:05:00.0: BAR 4: assigned [mem 
0x80008000000-0x800080fffff 64bit pref]
     [    4.876961] pci 0000:05:00.0: BAR 6: assigned [mem 
0xe9200000-0xe92fffff pref]
     [    4.876962] pci 0000:05:00.0: BAR 11: assigned [mem 
0x80008100000-0x8000bcfffff 64bit pref]
     [    4.876965] pci 0000:05:00.0: BAR 0: assigned [mem 
0x8000bd00000-0x8000bd1ffff 64bit pref]
     [    4.876970] pci 0000:05:00.0: BAR 2: assigned [mem 
0x8000bd20000-0x8000bd27fff 64bit pref]
     [    4.876975] pci 0000:05:00.0: BAR 9: assigned [mem 
0x8000bd28000-0x8000bf07fff 64bit pref]
     [    4.876977] pci 0000:05:00.0: BAR 7: assigned [mem 
0x8000bf08000-0x8000bff7fff 64bit pref]
     [    4.876981] pci 0000:02:02.0: PCI bridge to [bus 05]
     [    4.876984] pci 0000:02:02.0:   bridge window [mem 
0xe9200000-0xe92fffff]
     [    4.876986] pci 0000:02:02.0:   bridge window [mem 
0x80008000000-0x8000bffffff 64bit pref]
     [    4.876991] pci 0000:06:00.0: BAR 4: assigned [mem 
0x8000c000000-0x8000c0fffff 64bit pref]
     [    4.876996] pci 0000:06:00.0: BAR 6: assigned [mem 
0xe9300000-0xe93fffff pref]
     [    4.876998] pci 0000:06:00.0: BAR 11: assigned [mem 
0x8000c100000-0x8000fcfffff 64bit pref]
     [    4.877001] pci 0000:06:00.0: BAR 0: assigned [mem 
0x8000fd00000-0x8000fd1ffff 64bit pref]
     [    4.877006] pci 0000:06:00.0: BAR 2: assigned [mem 
0x8000fd20000-0x8000fd27fff 64bit pref]
     [    4.877010] pci 0000:06:00.0: BAR 9: assigned [mem 
0x8000fd28000-0x8000ff07fff 64bit pref]
     [    4.877013] pci 0000:06:00.0: BAR 7: assigned [mem 
0x8000ff08000-0x8000fff7fff 64bit pref]
     [    4.877016] pci 0000:02:03.0: PCI bridge to [bus 06]
     [    4.877019] pci 0000:02:03.0:   bridge window [mem 
0xe9300000-0xe93fffff]
     [    4.877022] pci 0000:02:03.0:   bridge window [mem 
0x8000c000000-0x8000fffffff 64bit pref]
     [    4.877025] pci 0000:01:00.0: PCI bridge to [bus 02-06]
     [    4.877028] pci 0000:01:00.0:   bridge window [mem 
0xe9000000-0xe93fffff]
     [    4.877030] pci 0000:01:00.0:   bridge window [mem 
0x80000000000-0x8000fffffff 64bit pref]
     [    4.877033] pci 0000:00:00.0: PCI bridge to [bus 01-06]
     [    4.877036] pci 0000:00:00.0:   bridge window [mem 
0xe9000000-0xe93fffff]
     [    4.877038] pci 0000:00:00.0:   bridge window [mem 
0x80000000000-0x8000fffffff 64bit pref]
     [    4.877040] pci 0000:00:08.0: PCI bridge to [bus 07]
     [    4.877044] pci 0000:08:00.0: BAR 14: assigned [mem 
0xe9400000-0xe97fffff]
     [    4.877046] pci 0000:08:00.0: BAR 15: assigned [mem 
0x80010000000-0x8001fffffff 64bit pref]
     [    4.877049] pci 0000:09:00.0: BAR 14: assigned [mem 
0xe9400000-0xe94fffff]
     [    4.877051] pci 0000:09:00.0: BAR 15: assigned [mem 
0x80010000000-0x80013ffffff 64bit pref]
     [    4.877053] pci 0000:09:01.0: BAR 14: assigned [mem 
0xe9500000-0xe95fffff]
     [    4.877055] pci 0000:09:01.0: BAR 15: assigned [mem 
0x80014000000-0x80017ffffff 64bit pref]
     [    4.877057] pci 0000:09:02.0: BAR 14: assigned [mem 
0xe9600000-0xe96fffff]
     [    4.877059] pci 0000:09:02.0: BAR 15: assigned [mem 
0x80018000000-0x8001bffffff 64bit pref]
     [    4.877060] pci 0000:09:03.0: BAR 14: assigned [mem 
0xe9700000-0xe97fffff]
     [    4.877062] pci 0000:09:03.0: BAR 15: assigned [mem 
0x8001c000000-0x8001fffffff 64bit pref]
     [    4.877065] pci 0000:0a:00.0: BAR 4: assigned [mem 
0x80010000000-0x800100fffff 64bit pref]
     [    4.877071] pci 0000:0a:00.0: BAR 6: assigned [mem 
0xe9400000-0xe94fffff pref]
     [    4.877073] pci 0000:0a:00.0: BAR 11: assigned [mem 
0x80010100000-0x80013cfffff 64bit pref]
     [    4.877076] pci 0000:0a:00.0: BAR 0: assigned [mem 
0x80013d00000-0x80013d1ffff 64bit pref]
     [    4.877081] pci 0000:0a:00.0: BAR 2: assigned [mem 
0x80013d20000-0x80013d27fff 64bit pref]
     [    4.877085] pci 0000:0a:00.0: BAR 9: assigned [mem 
0x80013d28000-0x80013f07fff 64bit pref]
     [    4.877088] pci 0000:0a:00.0: BAR 7: assigned [mem 
0x80013f08000-0x80013ff7fff 64bit pref]
     [    4.877092] pci 0000:09:00.0: PCI bridge to [bus 0a]
     [    4.877095] pci 0000:09:00.0:   bridge window [mem 
0xe9400000-0xe94fffff]
     [    4.877098] pci 0000:09:00.0:   bridge window [mem 
0x80010000000-0x80013ffffff 64bit pref]
     [    4.877102] pci 0000:0b:00.0: BAR 4: assigned [mem 
0x80014000000-0x800140fffff 64bit pref]
     [    4.877107] pci 0000:0b:00.0: BAR 6: assigned [mem 
0xe9500000-0xe95fffff pref]
     [    4.877109] pci 0000:0b:00.0: BAR 11: assigned [mem 
0x80014100000-0x80017cfffff 64bit pref]
     [    4.877112] pci 0000:0b:00.0: BAR 0: assigned [mem 
0x80017d00000-0x80017d1ffff 64bit pref]
     [    4.877117] pci 0000:0b:00.0: BAR 2: assigned [mem 
0x80017d20000-0x80017d27fff 64bit pref]
     [    4.877122] pci 0000:0b:00.0: BAR 9: assigned [mem 
0x80017d28000-0x80017f07fff 64bit pref]
     [    4.877125] pci 0000:0b:00.0: BAR 7: assigned [mem 
0x80017f08000-0x80017ff7fff 64bit pref]
     [    4.877129] pci 0000:09:01.0: PCI bridge to [bus 0b]
     [    4.877132] pci 0000:09:01.0:   bridge window [mem 
0xe9500000-0xe95fffff]
     [    4.877135] pci 0000:09:01.0:   bridge window [mem 
0x80014000000-0x80017ffffff 64bit pref]
     [    4.877139] pci 0000:0c:00.0: BAR 4: assigned [mem 
0x80018000000-0x800180fffff 64bit pref]
     [    4.877144] pci 0000:0c:00.0: BAR 6: assigned [mem 
0xe9600000-0xe96fffff pref]
     [    4.877145] pci 0000:0c:00.0: BAR 11: assigned [mem 
0x80018100000-0x8001bcfffff 64bit pref]
     [    4.877148] pci 0000:0c:00.0: BAR 0: assigned [mem 
0x8001bd00000-0x8001bd1ffff 64bit pref]
     [    4.877153] pci 0000:0c:00.0: BAR 2: assigned [mem 
0x8001bd20000-0x8001bd27fff 64bit pref]
     [    4.877158] pci 0000:0c:00.0: BAR 9: assigned [mem 
0x8001bd28000-0x8001bf07fff 64bit pref]
     [    4.877161] pci 0000:0c:00.0: BAR 7: assigned [mem 
0x8001bf08000-0x8001bff7fff 64bit pref]
     [    4.877164] pci 0000:09:02.0: PCI bridge to [bus 0c]
     [    4.877167] pci 0000:09:02.0:   bridge window [mem 
0xe9600000-0xe96fffff]
     [    4.877170] pci 0000:09:02.0:   bridge window [mem 
0x80018000000-0x8001bffffff 64bit pref]
     [    4.877174] pci 0000:0d:00.0: BAR 4: assigned [mem 
0x8001c000000-0x8001c0fffff 64bit pref]
     [    4.877179] pci 0000:0d:00.0: BAR 6: assigned [mem 
0xe9700000-0xe97fffff pref]
     [    4.877181] pci 0000:0d:00.0: BAR 11: assigned [mem 
0x8001c100000-0x8001fcfffff 64bit pref]
     [    4.877184] pci 0000:0d:00.0: BAR 0: assigned [mem 
0x8001fd00000-0x8001fd1ffff 64bit pref]
     [    4.877189] pci 0000:0d:00.0: BAR 2: assigned [mem 
0x8001fd20000-0x8001fd27fff 64bit pref]
     [    4.877193] pci 0000:0d:00.0: BAR 9: assigned [mem 
0x8001fd28000-0x8001ff07fff 64bit pref]
     [    4.877196] pci 0000:0d:00.0: BAR 7: assigned [mem 
0x8001ff08000-0x8001fff7fff 64bit pref]
     [    4.877200] pci 0000:09:03.0: PCI bridge to [bus 0d]
     [    4.877203] pci 0000:09:03.0:   bridge window [mem 
0xe9700000-0xe97fffff]
     [    4.877205] pci 0000:09:03.0:   bridge window [mem 
0x8001c000000-0x8001fffffff 64bit pref]
     [    4.877208] pci 0000:08:00.0: PCI bridge to [bus 09-0d]
     [    4.877211] pci 0000:08:00.0:   bridge window [mem 
0xe9400000-0xe97fffff]
     [    4.877214] pci 0000:08:00.0:   bridge window [mem 
0x80010000000-0x8001fffffff 64bit pref]
     [    4.877217] pci 0000:00:0c.0: PCI bridge to [bus 08-0d]
     [    4.877219] pci 0000:00:0c.0:   bridge window [mem 
0xe9400000-0xe97fffff]
     [    4.877221] pci 0000:00:0c.0:   bridge window [mem 
0x80010000000-0x8001fffffff 64bit pref]
     [    4.877224] pci 0000:0e:00.0: BAR 0: assigned [mem 
0xe0000000-0xe3ffffff pref]
     [    4.877229] pci 0000:0e:00.0: BAR 1: assigned [mem 
0xe4000000-0xe40fffff]
     [    4.877234] pci 0000:00:10.0: PCI bridge to [bus 0e]
     [    4.877236] pci 0000:00:10.0:   bridge window [mem 
0xe0000000-0xe5ffffff]
     [    4.877239] pci 0000:0f:00.0: BAR 0: assigned [mem 
0xe6000000-0xe7ffffff pref]
     [    4.877244] pci 0000:0f:00.0: BAR 1: assigned [mem 
0xe8000000-0xe81fffff]
     [    4.877248] pci 0000:00:11.0: PCI bridge to [bus 0f]
     [    4.877251] pci 0000:00:11.0:   bridge window [mem 
0xe6000000-0xe8ffffff]
     [    4.877253] pci 0000:00:12.0: PCI bridge to [bus 10]
     [    4.877257] pci_bus 0000:00: resource 4 [mem 
0x80000000000-0x83fffffffff pref window]
     [    4.877259] pci_bus 0000:00: resource 5 [mem 
0xe0000000-0xeffeffff window]
     [    4.877261] pci_bus 0000:00: resource 6 [io  0x0000-0xffff window]
     [    4.877263] pci_bus 0000:01: resource 1 [mem 0xe9000000-0xe93fffff]
     [    4.877264] pci_bus 0000:01: resource 2 [mem 
0x80000000000-0x8000fffffff 64bit pref]
     [    4.877266] pci_bus 0000:02: resource 1 [mem 0xe9000000-0xe93fffff]
     [    4.877267] pci_bus 0000:02: resource 2 [mem 
0x80000000000-0x8000fffffff 64bit pref]
     [    4.877269] pci_bus 0000:03: resource 1 [mem 0xe9000000-0xe90fffff]
     [    4.877271] pci_bus 0000:03: resource 2 [mem 
0x80000000000-0x80003ffffff 64bit pref]
     [    4.877272] pci_bus 0000:04: resource 1 [mem 0xe9100000-0xe91fffff]
     [    4.877274] pci_bus 0000:04: resource 2 [mem 
0x80004000000-0x80007ffffff 64bit pref]
     [    4.877276] pci_bus 0000:05: resource 1 [mem 0xe9200000-0xe92fffff]
     [    4.877278] pci_bus 0000:05: resource 2 [mem 
0x80008000000-0x8000bffffff 64bit pref]
     [    4.877279] pci_bus 0000:06: resource 1 [mem 0xe9300000-0xe93fffff]
     [    4.877281] pci_bus 0000:06: resource 2 [mem 
0x8000c000000-0x8000fffffff 64bit pref]
     [    4.877283] pci_bus 0000:08: resource 1 [mem 0xe9400000-0xe97fffff]
     [    4.877284] pci_bus 0000:08: resource 2 [mem 
0x80010000000-0x8001fffffff 64bit pref]
     [    4.877286] pci_bus 0000:09: resource 1 [mem 0xe9400000-0xe97fffff]
     [    4.877288] pci_bus 0000:09: resource 2 [mem 
0x80010000000-0x8001fffffff 64bit pref]
     [    4.877289] pci_bus 0000:0a: resource 1 [mem 0xe9400000-0xe94fffff]
     [    4.877291] pci_bus 0000:0a: resource 2 [mem 
0x80010000000-0x80013ffffff 64bit pref]
     [    4.877293] pci_bus 0000:0b: resource 1 [mem 0xe9500000-0xe95fffff]
     [    4.877294] pci_bus 0000:0b: resource 2 [mem 
0x80014000000-0x80017ffffff 64bit pref]
     [    4.877296] pci_bus 0000:0c: resource 1 [mem 0xe9600000-0xe96fffff]
     [    4.877297] pci_bus 0000:0c: resource 2 [mem 
0x80018000000-0x8001bffffff 64bit pref]
     [    4.877299] pci_bus 0000:0d: resource 1 [mem 0xe9700000-0xe97fffff]
     [    4.877301] pci_bus 0000:0d: resource 2 [mem 
0x8001c000000-0x8001fffffff 64bit pref]
     [    4.877302] pci_bus 0000:0e: resource 1 [mem 0xe0000000-0xe5ffffff]
     [    4.877304] pci_bus 0000:0f: resource 1 [mem 0xe6000000-0xe8ffffff]
     [    4.877356] ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 7b])
     [    4.877360] acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig 
ASPM ClockPM Segments MSI HPX-Type3]
     [    4.877364] acpi PNP0A08:01: _OSC failed (AE_NOT_FOUND); 
disabling ASPM
     [    4.878669] acpi PNP0A08:01: [Firmware Bug]: ECAM area [mem 
0xd7b00000-0xd7bfffff] not reserved in ACPI namespace
     [    4.878684] acpi PNP0A08:01: ECAM at [mem 0xd7b00000-0xd7bfffff] 
for [bus 7b]
     [    4.878722] PCI host bridge to bus 0000:7b
     [    4.878724] pci_bus 0000:7b: root bus resource [mem 
0x148800000-0x148ffffff pref window]
     [    4.878726] pci_bus 0000:7b: root bus resource [bus 7b]
     [    4.878739] pci 0000:7b:00.0: [19e5:a122] type 00 class 0x088000
     [    4.878746] pci 0000:7b:00.0: reg 0x18: [mem 
0x00000000-0x00003fff 64bit pref]
     [    4.883832] pci 0000:7b:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.883872] pci 0000:7b:00.0: BAR 2: assigned [mem 
0x148800000-0x148803fff 64bit pref]
     [    4.883875] pci_bus 0000:7b: resource 4 [mem 
0x148800000-0x148ffffff pref window]
     [    4.883910] ACPI: PCI Root Bridge [PCI2] (domain 0000 [bus 7a])
     [    4.883914] acpi PNP0A08:02: _OSC: OS supports [ExtendedConfig 
ASPM ClockPM Segments MSI HPX-Type3]
     [    4.883917] acpi PNP0A08:02: _OSC failed (AE_NOT_FOUND); 
disabling ASPM
     [    4.885198] acpi PNP0A08:02: [Firmware Bug]: ECAM area [mem 
0xd7a00000-0xd7afffff] not reserved in ACPI namespace
     [    4.885213] acpi PNP0A08:02: ECAM at [mem 0xd7a00000-0xd7afffff] 
for [bus 7a]
     [    4.885250] PCI host bridge to bus 0000:7a
     [    4.885252] pci_bus 0000:7a: root bus resource [mem 
0x20c000000-0x20c1fffff pref window]
     [    4.885254] pci_bus 0000:7a: root bus resource [bus 7a]
     [    4.885261] pci 0000:7a:00.0: [19e5:a23b] type 00 class 0x0c0310
     [    4.885266] pci 0000:7a:00.0: reg 0x10: [mem 
0x20c100000-0x20c100fff 64bit pref]
     [    4.890328] pci 0000:7a:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.890339] pci 0000:7a:01.0: [19e5:a239] type 00 class 0x0c0320
     [    4.890344] pci 0000:7a:01.0: reg 0x10: [mem 
0x20c101000-0x20c101fff 64bit pref]
     [    4.895449] pci 0000:7a:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.895459] pci 0000:7a:02.0: [19e5:a238] type 00 class 0x0c0330
     [    4.895464] pci 0000:7a:02.0: reg 0x10: [mem 
0x20c000000-0x20c0fffff 64bit pref]
     [    4.900533] pci 0000:7a:02.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.900571] pci 0000:7a:02.0: BAR 0: assigned [mem 
0x20c000000-0x20c0fffff 64bit pref]
     [    4.900574] pci 0000:7a:00.0: BAR 0: assigned [mem 
0x20c100000-0x20c100fff 64bit pref]
     [    4.900577] pci 0000:7a:01.0: BAR 0: assigned [mem 
0x20c101000-0x20c101fff 64bit pref]
     [    4.900580] pci_bus 0000:7a: resource 4 [mem 
0x20c000000-0x20c1fffff pref window]
     [    4.900615] ACPI: PCI Root Bridge [PCI3] (domain 0000 [bus 78-79])
     [    4.900618] acpi PNP0A08:03: _OSC: OS supports [ExtendedConfig 
ASPM ClockPM Segments MSI HPX-Type3]
     [    4.900622] acpi PNP0A08:03: _OSC failed (AE_NOT_FOUND); 
disabling ASPM
     [    4.901898] acpi PNP0A08:03: [Firmware Bug]: ECAM area [mem 
0xd7800000-0xd79fffff] not reserved in ACPI namespace
     [    4.901904] acpi PNP0A08:03: ECAM at [mem 0xd7800000-0xd79fffff] 
for [bus 78-79]
     [    4.901959] PCI host bridge to bus 0000:78
     [    4.901961] pci_bus 0000:78: root bus resource [mem 
0x208000000-0x208bfffff pref window]
     [    4.901963] pci_bus 0000:78: root bus resource [bus 78-79]
     [    4.901969] pci 0000:78:00.0: [19e5:a121] type 01 class 0x060400
     [    4.901977] pci 0000:78:00.0: enabling Extended Tags
     [    4.907083] pci 0000:78:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.907092] pci 0000:78:01.0: [19e5:a25a] type 00 class 0x010400
     [    4.907099] pci 0000:78:01.0: reg 0x18: [mem 
0x208800000-0x208bfffff 64bit pref]
     [    4.912182] pci 0000:78:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.912241] pci 0000:79:00.0: [19e5:a258] type 00 class 0x100000
     [    4.912248] pci 0000:79:00.0: reg 0x18: [mem 
0x208000000-0x2083fffff 64bit pref]
     [    4.912269] pci 0000:79:00.0: reg 0x22c: [mem 
0x208400000-0x20840ffff 64bit pref]
     [    4.912271] pci 0000:79:00.0: VF(n) BAR2 space: [mem 
0x208400000-0x2087effff 64bit pref] (contains BAR2 for 63 VFs)
     [    4.917403] pci 0000:79:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.917418] pci 0000:78:00.0: bridge window [mem 
0x00400000-0x007fffff 64bit pref] to [bus 79] add_size 400000 add_align 
400000
     [    4.917422] pci 0000:78:00.0: BAR 15: assigned [mem 
0x208000000-0x2087fffff 64bit pref]
     [    4.917424] pci 0000:78:01.0: BAR 2: assigned [mem 
0x208800000-0x208bfffff 64bit pref]
     [    4.917427] pci 0000:79:00.0: BAR 2: assigned [mem 
0x208000000-0x2083fffff 64bit pref]
     [    4.917430] pci 0000:79:00.0: BAR 9: assigned [mem 
0x208400000-0x2087effff 64bit pref]
     [    4.917432] pci 0000:78:00.0: PCI bridge to [bus 79]
     [    4.917435] pci 0000:78:00.0:   bridge window [mem 
0x208000000-0x2087fffff 64bit pref]
     [    4.917437] pci_bus 0000:78: resource 4 [mem 
0x208000000-0x208bfffff pref window]
     [    4.917439] pci_bus 0000:79: resource 2 [mem 
0x208000000-0x2087fffff 64bit pref]
     [    4.917476] ACPI: PCI Root Bridge [PCI4] (domain 0000 [bus 7c-7d])
     [    4.917479] acpi PNP0A08:04: _OSC: OS supports [ExtendedConfig 
ASPM ClockPM Segments MSI HPX-Type3]
     [    4.917483] acpi PNP0A08:04: _OSC failed (AE_NOT_FOUND); 
disabling ASPM
     [    4.918766] acpi PNP0A08:04: [Firmware Bug]: ECAM area [mem 
0xd7c00000-0xd7dfffff] not reserved in ACPI namespace
     [    4.918772] acpi PNP0A08:04: ECAM at [mem 0xd7c00000-0xd7dfffff] 
for [bus 7c-7d]
     [    4.918809] PCI host bridge to bus 0000:7c
     [    4.918811] pci_bus 0000:7c: root bus resource [mem 
0x120000000-0x13fffffff pref window]
     [    4.918813] pci_bus 0000:7c: root bus resource [bus 7c-7d]
     [    4.918825] pci 0000:7c:00.0: [19e5:a121] type 01 class 0x060400
     [    4.918833] pci 0000:7c:00.0: enabling Extended Tags
     [    4.923919] pci 0000:7c:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.923990] pci 0000:7d:00.0: [19e5:a222] type 00 class 0x020000
     [    4.923996] pci 0000:7d:00.0: reg 0x10: [mem 
0x1210f0000-0x1210fffff 64bit pref]
     [    4.923999] pci 0000:7d:00.0: reg 0x18: [mem 
0x120f00000-0x120ffffff 64bit pref]
     [    4.924019] pci 0000:7d:00.0: reg 0x224: [mem 
0x1210c0000-0x1210cffff 64bit pref]
     [    4.924021] pci 0000:7d:00.0: VF(n) BAR0 space: [mem 
0x1210c0000-0x1210effff 64bit pref] (contains BAR0 for 3 VFs)
     [    4.924024] pci 0000:7d:00.0: reg 0x22c: [mem 
0x120c00000-0x120cfffff 64bit pref]
     [    4.924026] pci 0000:7d:00.0: VF(n) BAR2 space: [mem 
0x120c00000-0x120efffff 64bit pref] (contains BAR2 for 3 VFs)
     [    4.929079] pci 0000:7d:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.929090] pci 0000:7d:00.1: [19e5:a221] type 00 class 0x020000
     [    4.929095] pci 0000:7d:00.1: reg 0x10: [mem 
0x1210b0000-0x1210bffff 64bit pref]
     [    4.929098] pci 0000:7d:00.1: reg 0x18: [mem 
0x120b00000-0x120bfffff 64bit pref]
     [    4.929116] pci 0000:7d:00.1: reg 0x224: [mem 
0x121080000-0x12108ffff 64bit pref]
     [    4.929118] pci 0000:7d:00.1: VF(n) BAR0 space: [mem 
0x121080000-0x1210affff 64bit pref] (contains BAR0 for 3 VFs)
     [    4.929122] pci 0000:7d:00.1: reg 0x22c: [mem 
0x120800000-0x1208fffff 64bit pref]
     [    4.929123] pci 0000:7d:00.1: VF(n) BAR2 space: [mem 
0x120800000-0x120afffff 64bit pref] (contains BAR2 for 3 VFs)
     [    4.934206] pci 0000:7d:00.1: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.934217] pci 0000:7d:00.2: [19e5:a222] type 00 class 0x020000
     [    4.934222] pci 0000:7d:00.2: reg 0x10: [mem 
0x121070000-0x12107ffff 64bit pref]
     [    4.934226] pci 0000:7d:00.2: reg 0x18: [mem 
0x120700000-0x1207fffff 64bit pref]
     [    4.934244] pci 0000:7d:00.2: reg 0x224: [mem 
0x121040000-0x12104ffff 64bit pref]
     [    4.934246] pci 0000:7d:00.2: VF(n) BAR0 space: [mem 
0x121040000-0x12106ffff 64bit pref] (contains BAR0 for 3 VFs)
     [    4.934249] pci 0000:7d:00.2: reg 0x22c: [mem 
0x120400000-0x1204fffff 64bit pref]
     [    4.934251] pci 0000:7d:00.2: VF(n) BAR2 space: [mem 
0x120400000-0x1206fffff 64bit pref] (contains BAR2 for 3 VFs)
     [    4.939300] pci 0000:7d:00.2: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.939310] pci 0000:7d:00.3: [19e5:a221] type 00 class 0x020000
     [    4.939316] pci 0000:7d:00.3: reg 0x10: [mem 
0x121030000-0x12103ffff 64bit pref]
     [    4.939319] pci 0000:7d:00.3: reg 0x18: [mem 
0x120300000-0x1203fffff 64bit pref]
     [    4.939337] pci 0000:7d:00.3: reg 0x224: [mem 
0x121000000-0x12100ffff 64bit pref]
     [    4.939339] pci 0000:7d:00.3: VF(n) BAR0 space: [mem 
0x121000000-0x12102ffff 64bit pref] (contains BAR0 for 3 VFs)
     [    4.939343] pci 0000:7d:00.3: reg 0x22c: [mem 
0x120000000-0x1200fffff 64bit pref]
     [    4.939344] pci 0000:7d:00.3: VF(n) BAR2 space: [mem 
0x120000000-0x1202fffff 64bit pref] (contains BAR2 for 3 VFs)
     [    4.944430] pci 0000:7d:00.3: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.944448] pci 0000:7c:00.0: bridge window [mem 
0x00100000-0x005fffff 64bit pref] to [bus 7d] add_size c00000 add_align 
100000
     [    4.944451] pci 0000:7c:00.0: BAR 15: assigned [mem 
0x120000000-0x1210fffff 64bit pref]
     [    4.944456] pci 0000:7d:00.0: BAR 2: assigned [mem 
0x120000000-0x1200fffff 64bit pref]
     [    4.944459] pci 0000:7d:00.0: BAR 9: assigned [mem 
0x120100000-0x1203fffff 64bit pref]
     [    4.944461] pci 0000:7d:00.1: BAR 2: assigned [mem 
0x120400000-0x1204fffff 64bit pref]
     [    4.944464] pci 0000:7d:00.1: BAR 9: assigned [mem 
0x120500000-0x1207fffff 64bit pref]
     [    4.944466] pci 0000:7d:00.2: BAR 2: assigned [mem 
0x120800000-0x1208fffff 64bit pref]
     [    4.944469] pci 0000:7d:00.2: BAR 9: assigned [mem 
0x120900000-0x120bfffff 64bit pref]
     [    4.944471] pci 0000:7d:00.3: BAR 2: assigned [mem 
0x120c00000-0x120cfffff 64bit pref]
     [    4.944474] pci 0000:7d:00.3: BAR 9: assigned [mem 
0x120d00000-0x120ffffff 64bit pref]
     [    4.944476] pci 0000:7d:00.0: BAR 0: assigned [mem 
0x121000000-0x12100ffff 64bit pref]
     [    4.944479] pci 0000:7d:00.0: BAR 7: assigned [mem 
0x121010000-0x12103ffff 64bit pref]
     [    4.944481] pci 0000:7d:00.1: BAR 0: assigned [mem 
0x121040000-0x12104ffff 64bit pref]
     [    4.944484] pci 0000:7d:00.1: BAR 7: assigned [mem 
0x121050000-0x12107ffff 64bit pref]
     [    4.944486] pci 0000:7d:00.2: BAR 0: assigned [mem 
0x121080000-0x12108ffff 64bit pref]
     [    4.944489] pci 0000:7d:00.2: BAR 7: assigned [mem 
0x121090000-0x1210bffff 64bit pref]
     [    4.944491] pci 0000:7d:00.3: BAR 0: assigned [mem 
0x1210c0000-0x1210cffff 64bit pref]
     [    4.944494] pci 0000:7d:00.3: BAR 7: assigned [mem 
0x1210d0000-0x1210fffff 64bit pref]
     [    4.944498] pci 0000:7c:00.0: PCI bridge to [bus 7d]
     [    4.944500] pci 0000:7c:00.0:   bridge window [mem 
0x120000000-0x1210fffff 64bit pref]
     [    4.944503] pci_bus 0000:7c: resource 4 [mem 
0x120000000-0x13fffffff pref window]
     [    4.944504] pci_bus 0000:7d: resource 2 [mem 
0x120000000-0x1210fffff 64bit pref]
     [    4.944543] ACPI: PCI Root Bridge [PCI5] (domain 0000 [bus 74-76])
     [    4.944547] acpi PNP0A08:05: _OSC: OS supports [ExtendedConfig 
ASPM ClockPM Segments MSI HPX-Type3]
     [    4.944550] acpi PNP0A08:05: _OSC failed (AE_NOT_FOUND); 
disabling ASPM
     [    4.945836] acpi PNP0A08:05: [Firmware Bug]: ECAM area [mem 
0xd7400000-0xd76fffff] not reserved in ACPI namespace
     [    4.945851] acpi PNP0A08:05: ECAM at [mem 0xd7400000-0xd76fffff] 
for [bus 74-76]
     [    4.945919] PCI host bridge to bus 0000:74
     [    4.945922] pci_bus 0000:74: root bus resource [mem 
0x141000000-0x141ffffff pref window]
     [    4.945923] pci_bus 0000:74: root bus resource [mem 
0x144000000-0x145ffffff pref window]
     [    4.945925] pci_bus 0000:74: root bus resource [mem 
0xa2000000-0xa2ffffff window]
     [    4.945927] pci_bus 0000:74: root bus resource [bus 74-76]
     [    4.945933] pci 0000:74:00.0: [19e5:a121] type 01 class 0x060400
     [    4.945941] pci 0000:74:00.0: enabling Extended Tags
     [    4.951015] pci 0000:74:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.951024] pci 0000:74:01.0: [19e5:a121] type 01 class 0x060400
     [    4.951033] pci 0000:74:01.0: enabling Extended Tags
     [    4.956141] pci 0000:74:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.956149] pci 0000:74:02.0: [19e5:a230] type 00 class 0x010700
     [    4.956157] pci 0000:74:02.0: reg 0x24: [mem 0xa2008000-0xa200ffff]
     [    4.961238] pci 0000:74:02.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.961250] pci 0000:74:03.0: [19e5:a235] type 00 class 0x010601
     [    4.961261] pci 0000:74:03.0: reg 0x24: [mem 0xa2010000-0xa2010fff]
     [    4.966367] pci 0000:74:03.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.966376] pci 0000:74:04.0: [19e5:a230] type 00 class 0x010700
     [    4.966384] pci 0000:74:04.0: reg 0x24: [mem 0xa2000000-0xa2007fff]
     [    4.971465] pci 0000:74:04.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.971523] pci 0000:75:00.0: [19e5:a250] type 00 class 0x120000
     [    4.971530] pci 0000:75:00.0: reg 0x18: [mem 
0x144000000-0x1443fffff 64bit pref]
     [    4.971551] pci 0000:75:00.0: reg 0x22c: [mem 
0x144400000-0x14440ffff 64bit pref]
     [    4.971553] pci 0000:75:00.0: VF(n) BAR2 space: [mem 
0x144400000-0x1447effff 64bit pref] (contains BAR2 for 63 VFs)
     [    4.976668] pci 0000:75:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.976706] pci 0000:76:00.0: [19e5:a255] type 00 class 0x100000
     [    4.976713] pci 0000:76:00.0: reg 0x18: [mem 
0x144800000-0x144bfffff 64bit pref]
     [    4.976734] pci 0000:76:00.0: reg 0x22c: [mem 
0x144c00000-0x144c0ffff 64bit pref]
     [    4.976736] pci 0000:76:00.0: VF(n) BAR2 space: [mem 
0x144c00000-0x144feffff 64bit pref] (contains BAR2 for 63 VFs)
     [    4.981828] pci 0000:76:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.981843] pci 0000:74:00.0: bridge window [mem 
0x00400000-0x007fffff 64bit pref] to [bus 75] add_size 400000 add_align 
400000
     [    4.981846] pci 0000:74:01.0: bridge window [mem 
0x00400000-0x007fffff 64bit pref] to [bus 76] add_size 400000 add_align 
400000
     [    4.981850] pci 0000:74:00.0: BAR 15: assigned [mem 
0x141000000-0x1417fffff 64bit pref]
     [    4.981851] pci 0000:74:01.0: BAR 15: assigned [mem 
0x141800000-0x141ffffff 64bit pref]
     [    4.981853] pci 0000:74:02.0: BAR 5: assigned [mem 
0xa2000000-0xa2007fff]
     [    4.981856] pci 0000:74:04.0: BAR 5: assigned [mem 
0xa2008000-0xa200ffff]
     [    4.981858] pci 0000:74:03.0: BAR 5: assigned [mem 
0xa2010000-0xa2010fff]
     [    4.981860] pci 0000:75:00.0: BAR 2: assigned [mem 
0x141000000-0x1413fffff 64bit pref]
     [    4.981863] pci 0000:75:00.0: BAR 9: assigned [mem 
0x141400000-0x1417effff 64bit pref]
     [    4.981866] pci 0000:74:00.0: PCI bridge to [bus 75]
     [    4.981868] pci 0000:74:00.0:   bridge window [mem 
0x141000000-0x1417fffff 64bit pref]
     [    4.981871] pci 0000:76:00.0: BAR 2: assigned [mem 
0x141800000-0x141bfffff 64bit pref]
     [    4.981874] pci 0000:76:00.0: BAR 9: assigned [mem 
0x141c00000-0x141feffff 64bit pref]
     [    4.981876] pci 0000:74:01.0: PCI bridge to [bus 76]
     [    4.981879] pci 0000:74:01.0:   bridge window [mem 
0x141800000-0x141ffffff 64bit pref]
     [    4.981881] pci_bus 0000:74: resource 4 [mem 
0x141000000-0x141ffffff pref window]
     [    4.981883] pci_bus 0000:74: resource 5 [mem 
0x144000000-0x145ffffff pref window]
     [    4.981884] pci_bus 0000:74: resource 6 [mem 
0xa2000000-0xa2ffffff window]
     [    4.981886] pci_bus 0000:75: resource 2 [mem 
0x141000000-0x1417fffff 64bit pref]
     [    4.981887] pci_bus 0000:76: resource 2 [mem 
0x141800000-0x141ffffff 64bit pref]
     [    4.981947] ACPI: PCI Root Bridge [PCI6] (domain 0000 [bus 80-9f])
     [    4.981950] acpi PNP0A08:06: _OSC: OS supports [ExtendedConfig 
ASPM ClockPM Segments MSI HPX-Type3]
     [    4.982029] acpi PNP0A08:06: _OSC: platform does not support [LTR]
     [    4.982097] acpi PNP0A08:06: _OSC: OS now controls [PME AER 
PCIeCapability]
     [    4.983392] acpi PNP0A08:06: [Firmware Bug]: ECAM area [mem 
0xd8000000-0xd9ffffff] not reserved in ACPI namespace
     [    4.983400] acpi PNP0A08:06: ECAM at [mem 0xd8000000-0xd9ffffff] 
for [bus 80-9f]
     [    4.983416] Remapped I/O 0x00000000ffff0000 to [io 
0x10000-0x1ffff window]
     [    4.983458] PCI host bridge to bus 0000:80
     [    4.983460] pci_bus 0000:80: root bus resource [mem 
0x280000000000-0x283fffffffff pref window]
     [    4.983461] pci_bus 0000:80: root bus resource [mem 
0xf0000000-0xfffeffff window]
     [    4.983464] pci_bus 0000:80: root bus resource [io 
0x10000-0x1ffff window] (bus address [0x0000-0xffff])
     [    4.983466] pci_bus 0000:80: root bus resource [bus 80-9f]
     [    4.983498] pci 0000:80:00.0: [19e5:a120] type 01 class 0x060400
     [    4.983559] pci 0000:80:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.988626] pci 0000:80:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.988641] pci 0000:80:04.0: [19e5:a120] type 01 class 0x060400
     [    4.988697] pci 0000:80:04.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.993780] pci 0000:80:04.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.993794] pci 0000:80:08.0: [19e5:a120] type 01 class 0x060400
     [    4.993849] pci 0000:80:08.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    4.998909] pci 0000:80:08.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    4.998924] pci 0000:80:0c.0: [19e5:a120] type 01 class 0x060400
     [    4.998977] pci 0000:80:0c.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    5.004058] pci 0000:80:0c.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.004074] pci 0000:80:10.0: [19e5:a120] type 01 class 0x060400
     [    5.004129] pci 0000:80:10.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    5.009186] pci 0000:80:10.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.009314] pci 0000:85:00.0: [19e5:371e] type 01 class 0x060400
     [    5.009387] pci 0000:85:00.0: supports D1 D2
     [    5.009389] pci 0000:85:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    5.009405] pci 0000:85:00.0: 63.008 Gb/s available PCIe 
bandwidth, limited by 8 GT/s x8 link at 0000:80:10.0 (capable of 126.016 
Gb/s with 8 GT/s x16 link)
     [    5.014485] pci 0000:85:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.014526] pci 0000:86:00.0: [19e5:371e] type 01 class 0x060400
     [    5.014602] pci 0000:86:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    5.019664] pci 0000:86:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.019676] pci 0000:86:01.0: [19e5:371e] type 01 class 0x060400
     [    5.019751] pci 0000:86:01.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    5.024845] pci 0000:86:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.024857] pci 0000:86:02.0: [19e5:371e] type 01 class 0x060400
     [    5.024932] pci 0000:86:02.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    5.029993] pci 0000:86:02.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.030006] pci 0000:86:03.0: [19e5:371e] type 01 class 0x060400
     [    5.030080] pci 0000:86:03.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    5.035164] pci 0000:86:03.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.035233] pci 0000:87:00.0: [19e5:1822] type 00 class 0x020000
     [    5.035248] pci 0000:87:00.0: reg 0x10: [mem 
0x28000fd00000-0x28000fd1ffff 64bit pref]
     [    5.035254] pci 0000:87:00.0: reg 0x18: [mem 
0x28000ff00000-0x28000ff07fff 64bit pref]
     [    5.035260] pci 0000:87:00.0: reg 0x20: [mem 
0x28000fc00000-0x28000fcfffff 64bit pref]
     [    5.035264] pci 0000:87:00.0: reg 0x30: [mem 
0xf0300000-0xf03fffff pref]
     [    5.035330] pci 0000:87:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    5.035348] pci 0000:87:00.0: reg 0x224: [mem 
0x28000ff08000-0x28000ff0bfff 64bit pref]
     [    5.035350] pci 0000:87:00.0: VF(n) BAR0 space: [mem 
0x28000ff08000-0x28000fff7fff 64bit pref] (contains BAR0 for 60 VFs)
     [    5.035356] pci 0000:87:00.0: reg 0x22c: [mem 
0x28000fd20000-0x28000fd27fff 64bit pref]
     [    5.035358] pci 0000:87:00.0: VF(n) BAR2 space: [mem 
0x28000fd20000-0x28000fefffff 64bit pref] (contains BAR2 for 60 VFs)
     [    5.035364] pci 0000:87:00.0: reg 0x234: [mem 
0x28000c000000-0x28000c0fffff 64bit pref]
     [    5.035366] pci 0000:87:00.0: VF(n) BAR4 space: [mem 
0x28000c000000-0x28000fbfffff 64bit pref] (contains BAR4 for 60 VFs)
     [    5.035466] pci 0000:87:00.0: 63.008 Gb/s available PCIe 
bandwidth, limited by 8 GT/s x8 link at 0000:80:10.0 (capable of 126.016 
Gb/s with 8 GT/s x16 link)
     [    5.040516] pci 0000:87:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.040564] pci 0000:88:00.0: [19e5:1822] type 00 class 0x020000
     [    5.040579] pci 0000:88:00.0: reg 0x10: [mem 
0x28000bd00000-0x28000bd1ffff 64bit pref]
     [    5.040585] pci 0000:88:00.0: reg 0x18: [mem 
0x28000bf00000-0x28000bf07fff 64bit pref]
     [    5.040591] pci 0000:88:00.0: reg 0x20: [mem 
0x28000bc00000-0x28000bcfffff 64bit pref]
     [    5.040595] pci 0000:88:00.0: reg 0x30: [mem 
0xf0200000-0xf02fffff pref]
     [    5.040662] pci 0000:88:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    5.040679] pci 0000:88:00.0: reg 0x224: [mem 
0x28000bf08000-0x28000bf0bfff 64bit pref]
     [    5.040681] pci 0000:88:00.0: VF(n) BAR0 space: [mem 
0x28000bf08000-0x28000bff7fff 64bit pref] (contains BAR0 for 60 VFs)
     [    5.040687] pci 0000:88:00.0: reg 0x22c: [mem 
0x28000bd20000-0x28000bd27fff 64bit pref]
     [    5.040689] pci 0000:88:00.0: VF(n) BAR2 space: [mem 
0x28000bd20000-0x28000befffff 64bit pref] (contains BAR2 for 60 VFs)
     [    5.040695] pci 0000:88:00.0: reg 0x234: [mem 
0x280008000000-0x2800080fffff 64bit pref]
     [    5.040696] pci 0000:88:00.0: VF(n) BAR4 space: [mem 
0x280008000000-0x28000bbfffff 64bit pref] (contains BAR4 for 60 VFs)
     [    5.040796] pci 0000:88:00.0: 63.008 Gb/s available PCIe 
bandwidth, limited by 8 GT/s x8 link at 0000:80:10.0 (capable of 126.016 
Gb/s with 8 GT/s x16 link)
     [    5.045874] pci 0000:88:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.045918] pci 0000:89:00.0: [19e5:1822] type 00 class 0x020000
     [    5.045934] pci 0000:89:00.0: reg 0x10: [mem 
0x280007d00000-0x280007d1ffff 64bit pref]
     [    5.045940] pci 0000:89:00.0: reg 0x18: [mem 
0x280007f00000-0x280007f07fff 64bit pref]
     [    5.045946] pci 0000:89:00.0: reg 0x20: [mem 
0x280007c00000-0x280007cfffff 64bit pref]
     [    5.045950] pci 0000:89:00.0: reg 0x30: [mem 
0xf0100000-0xf01fffff pref]
     [    5.046016] pci 0000:89:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    5.046034] pci 0000:89:00.0: reg 0x224: [mem 
0x280007f08000-0x280007f0bfff 64bit pref]
     [    5.046036] pci 0000:89:00.0: VF(n) BAR0 space: [mem 
0x280007f08000-0x280007ff7fff 64bit pref] (contains BAR0 for 60 VFs)
     [    5.046042] pci 0000:89:00.0: reg 0x22c: [mem 
0x280007d20000-0x280007d27fff 64bit pref]
     [    5.046044] pci 0000:89:00.0: VF(n) BAR2 space: [mem 
0x280007d20000-0x280007efffff 64bit pref] (contains BAR2 for 60 VFs)
     [    5.046050] pci 0000:89:00.0: reg 0x234: [mem 
0x280004000000-0x2800040fffff 64bit pref]
     [    5.046052] pci 0000:89:00.0: VF(n) BAR4 space: [mem 
0x280004000000-0x280007bfffff 64bit pref] (contains BAR4 for 60 VFs)
     [    5.046153] pci 0000:89:00.0: 63.008 Gb/s available PCIe 
bandwidth, limited by 8 GT/s x8 link at 0000:80:10.0 (capable of 126.016 
Gb/s with 8 GT/s x16 link)
     [    5.051203] pci 0000:89:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.051251] pci 0000:8a:00.0: [19e5:1822] type 00 class 0x020000
     [    5.051267] pci 0000:8a:00.0: reg 0x10: [mem 
0x280003d00000-0x280003d1ffff 64bit pref]
     [    5.051273] pci 0000:8a:00.0: reg 0x18: [mem 
0x280003f00000-0x280003f07fff 64bit pref]
     [    5.051279] pci 0000:8a:00.0: reg 0x20: [mem 
0x280003c00000-0x280003cfffff 64bit pref]
     [    5.051283] pci 0000:8a:00.0: reg 0x30: [mem 
0xf0000000-0xf00fffff pref]
     [    5.051349] pci 0000:8a:00.0: PME# supported from D0 D1 D2 D3hot 
D3cold
     [    5.051366] pci 0000:8a:00.0: reg 0x224: [mem 
0x280003f08000-0x280003f0bfff 64bit pref]
     [    5.051368] pci 0000:8a:00.0: VF(n) BAR0 space: [mem 
0x280003f08000-0x280003ff7fff 64bit pref] (contains BAR0 for 60 VFs)
     [    5.051374] pci 0000:8a:00.0: reg 0x22c: [mem 
0x280003d20000-0x280003d27fff 64bit pref]
     [    5.051376] pci 0000:8a:00.0: VF(n) BAR2 space: [mem 
0x280003d20000-0x280003efffff 64bit pref] (contains BAR2 for 60 VFs)
     [    5.051382] pci 0000:8a:00.0: reg 0x234: [mem 
0x280000000000-0x2800000fffff 64bit pref]
     [    5.051384] pci 0000:8a:00.0: VF(n) BAR4 space: [mem 
0x280000000000-0x280003bfffff 64bit pref] (contains BAR4 for 60 VFs)
     [    5.051484] pci 0000:8a:00.0: 63.008 Gb/s available PCIe 
bandwidth, limited by 8 GT/s x8 link at 0000:80:10.0 (capable of 126.016 
Gb/s with 8 GT/s x16 link)
     [    5.056555] pci 0000:8a:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.056596] pci 0000:86:00.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 87] add_size 3e00000 add_align 
100000
     [    5.056599] pci 0000:86:01.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 88] add_size 3e00000 add_align 
100000
     [    5.056602] pci 0000:86:02.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 89] add_size 3e00000 add_align 
100000
     [    5.056605] pci 0000:86:03.0: bridge window [mem 
0x00100000-0x002fffff 64bit pref] to [bus 8a] add_size 3e00000 add_align 
100000
     [    5.056608] pci 0000:85:00.0: bridge window [mem 
0x00100000-0x008fffff 64bit pref] to [bus 86-8a] add_size f800000 
add_align 100000
     [    5.056611] pci 0000:80:10.0: bridge window [mem 
0x00100000-0x008fffff 64bit pref] to [bus 85-8a] add_size f800000 
add_align 100000
     [    5.056614] pci 0000:80:10.0: BAR 14: assigned [mem 
0xf0000000-0xf03fffff]
     [    5.056617] pci 0000:80:10.0: BAR 15: assigned [mem 
0x280000000000-0x28000fffffff 64bit pref]
     [    5.056619] pci 0000:80:00.0: PCI bridge to [bus 81]
     [    5.056623] pci 0000:80:04.0: PCI bridge to [bus 82]
     [    5.056626] pci 0000:80:08.0: PCI bridge to [bus 83]
     [    5.056630] pci 0000:80:0c.0: PCI bridge to [bus 84]
     [    5.056635] pci 0000:85:00.0: BAR 14: assigned [mem 
0xf0000000-0xf03fffff]
     [    5.056637] pci 0000:85:00.0: BAR 15: assigned [mem 
0x280000000000-0x28000fffffff 64bit pref]
     [    5.056640] pci 0000:86:00.0: BAR 14: assigned [mem 
0xf0000000-0xf00fffff]
     [    5.056642] pci 0000:86:00.0: BAR 15: assigned [mem 
0x280000000000-0x280003ffffff 64bit pref]
     [    5.056644] pci 0000:86:01.0: BAR 14: assigned [mem 
0xf0100000-0xf01fffff]
     [    5.056646] pci 0000:86:01.0: BAR 15: assigned [mem 
0x280004000000-0x280007ffffff 64bit pref]
     [    5.056647] pci 0000:86:02.0: BAR 14: assigned [mem 
0xf0200000-0xf02fffff]
     [    5.056649] pci 0000:86:02.0: BAR 15: assigned [mem 
0x280008000000-0x28000bffffff 64bit pref]
     [    5.056651] pci 0000:86:03.0: BAR 14: assigned [mem 
0xf0300000-0xf03fffff]
     [    5.056653] pci 0000:86:03.0: BAR 15: assigned [mem 
0x28000c000000-0x28000fffffff 64bit pref]
     [    5.056656] pci 0000:87:00.0: BAR 4: assigned [mem 
0x280000000000-0x2800000fffff 64bit pref]
     [    5.056661] pci 0000:87:00.0: BAR 6: assigned [mem 
0xf0000000-0xf00fffff pref]
     [    5.056663] pci 0000:87:00.0: BAR 11: assigned [mem 
0x280000100000-0x280003cfffff 64bit pref]
     [    5.056667] pci 0000:87:00.0: BAR 0: assigned [mem 
0x280003d00000-0x280003d1ffff 64bit pref]
     [    5.056672] pci 0000:87:00.0: BAR 2: assigned [mem 
0x280003d20000-0x280003d27fff 64bit pref]
     [    5.056677] pci 0000:87:00.0: BAR 9: assigned [mem 
0x280003d28000-0x280003f07fff 64bit pref]
     [    5.056680] pci 0000:87:00.0: BAR 7: assigned [mem 
0x280003f08000-0x280003ff7fff 64bit pref]
     [    5.056684] pci 0000:86:00.0: PCI bridge to [bus 87]
     [    5.056687] pci 0000:86:00.0:   bridge window [mem 
0xf0000000-0xf00fffff]
     [    5.056690] pci 0000:86:00.0:   bridge window [mem 
0x280000000000-0x280003ffffff 64bit pref]
     [    5.056694] pci 0000:88:00.0: BAR 4: assigned [mem 
0x280004000000-0x2800040fffff 64bit pref]
     [    5.056700] pci 0000:88:00.0: BAR 6: assigned [mem 
0xf0100000-0xf01fffff pref]
     [    5.056702] pci 0000:88:00.0: BAR 11: assigned [mem 
0x280004100000-0x280007cfffff 64bit pref]
     [    5.056705] pci 0000:88:00.0: BAR 0: assigned [mem 
0x280007d00000-0x280007d1ffff 64bit pref]
     [    5.056710] pci 0000:88:00.0: BAR 2: assigned [mem 
0x280007d20000-0x280007d27fff 64bit pref]
     [    5.056716] pci 0000:88:00.0: BAR 9: assigned [mem 
0x280007d28000-0x280007f07fff 64bit pref]
     [    5.056719] pci 0000:88:00.0: BAR 7: assigned [mem 
0x280007f08000-0x280007ff7fff 64bit pref]
     [    5.056722] pci 0000:86:01.0: PCI bridge to [bus 88]
     [    5.056725] pci 0000:86:01.0:   bridge window [mem 
0xf0100000-0xf01fffff]
     [    5.056728] pci 0000:86:01.0:   bridge window [mem 
0x280004000000-0x280007ffffff 64bit pref]
     [    5.056732] pci 0000:89:00.0: BAR 4: assigned [mem 
0x280008000000-0x2800080fffff 64bit pref]
     [    5.056738] pci 0000:89:00.0: BAR 6: assigned [mem 
0xf0200000-0xf02fffff pref]
     [    5.056739] pci 0000:89:00.0: BAR 11: assigned [mem 
0x280008100000-0x28000bcfffff 64bit pref]
     [    5.056743] pci 0000:89:00.0: BAR 0: assigned [mem 
0x28000bd00000-0x28000bd1ffff 64bit pref]
     [    5.056748] pci 0000:89:00.0: BAR 2: assigned [mem 
0x28000bd20000-0x28000bd27fff 64bit pref]
     [    5.056753] pci 0000:89:00.0: BAR 9: assigned [mem 
0x28000bd28000-0x28000bf07fff 64bit pref]
     [    5.056756] pci 0000:89:00.0: BAR 7: assigned [mem 
0x28000bf08000-0x28000bff7fff 64bit pref]
     [    5.056760] pci 0000:86:02.0: PCI bridge to [bus 89]
     [    5.056763] pci 0000:86:02.0:   bridge window [mem 
0xf0200000-0xf02fffff]
     [    5.056765] pci 0000:86:02.0:   bridge window [mem 
0x280008000000-0x28000bffffff 64bit pref]
     [    5.056770] pci 0000:8a:00.0: BAR 4: assigned [mem 
0x28000c000000-0x28000c0fffff 64bit pref]
     [    5.056775] pci 0000:8a:00.0: BAR 6: assigned [mem 
0xf0300000-0xf03fffff pref]
     [    5.056777] pci 0000:8a:00.0: BAR 11: assigned [mem 
0x28000c100000-0x28000fcfffff 64bit pref]
     [    5.056780] pci 0000:8a:00.0: BAR 0: assigned [mem 
0x28000fd00000-0x28000fd1ffff 64bit pref]
     [    5.056785] pci 0000:8a:00.0: BAR 2: assigned [mem 
0x28000fd20000-0x28000fd27fff 64bit pref]
     [    5.056790] pci 0000:8a:00.0: BAR 9: assigned [mem 
0x28000fd28000-0x28000ff07fff 64bit pref]
     [    5.056793] pci 0000:8a:00.0: BAR 7: assigned [mem 
0x28000ff08000-0x28000fff7fff 64bit pref]
     [    5.056797] pci 0000:86:03.0: PCI bridge to [bus 8a]
     [    5.056800] pci 0000:86:03.0:   bridge window [mem 
0xf0300000-0xf03fffff]
     [    5.056802] pci 0000:86:03.0:   bridge window [mem 
0x28000c000000-0x28000fffffff 64bit pref]
     [    5.056806] pci 0000:85:00.0: PCI bridge to [bus 86-8a]
     [    5.056809] pci 0000:85:00.0:   bridge window [mem 
0xf0000000-0xf03fffff]
     [    5.056811] pci 0000:85:00.0:   bridge window [mem 
0x280000000000-0x28000fffffff 64bit pref]
     [    5.056815] pci 0000:80:10.0: PCI bridge to [bus 85-8a]
     [    5.056817] pci 0000:80:10.0:   bridge window [mem 
0xf0000000-0xf03fffff]
     [    5.056819] pci 0000:80:10.0:   bridge window [mem 
0x280000000000-0x28000fffffff 64bit pref]
     [    5.056822] pci_bus 0000:80: resource 4 [mem 
0x280000000000-0x283fffffffff pref window]
     [    5.056824] pci_bus 0000:80: resource 5 [mem 
0xf0000000-0xfffeffff window]
     [    5.056825] pci_bus 0000:80: resource 6 [io  0x10000-0x1ffff window]
     [    5.056827] pci_bus 0000:85: resource 1 [mem 0xf0000000-0xf03fffff]
     [    5.056829] pci_bus 0000:85: resource 2 [mem 
0x280000000000-0x28000fffffff 64bit pref]
     [    5.056830] pci_bus 0000:86: resource 1 [mem 0xf0000000-0xf03fffff]
     [    5.056832] pci_bus 0000:86: resource 2 [mem 
0x280000000000-0x28000fffffff 64bit pref]
     [    5.056833] pci_bus 0000:87: resource 1 [mem 0xf0000000-0xf00fffff]
     [    5.056835] pci_bus 0000:87: resource 2 [mem 
0x280000000000-0x280003ffffff 64bit pref]
     [    5.056837] pci_bus 0000:88: resource 1 [mem 0xf0100000-0xf01fffff]
     [    5.056838] pci_bus 0000:88: resource 2 [mem 
0x280004000000-0x280007ffffff 64bit pref]
     [    5.056840] pci_bus 0000:89: resource 1 [mem 0xf0200000-0xf02fffff]
     [    5.056842] pci_bus 0000:89: resource 2 [mem 
0x280008000000-0x28000bffffff 64bit pref]
     [    5.056843] pci_bus 0000:8a: resource 1 [mem 0xf0300000-0xf03fffff]
     [    5.056845] pci_bus 0000:8a: resource 2 [mem 
0x28000c000000-0x28000fffffff 64bit pref]
     [    5.056900] ACPI: PCI Root Bridge [PCI7] (domain 0000 [bus bb])
     [    5.056903] acpi PNP0A08:07: _OSC: OS supports [ExtendedConfig 
ASPM ClockPM Segments MSI HPX-Type3]
     [    5.056907] acpi PNP0A08:07: _OSC failed (AE_NOT_FOUND); 
disabling ASPM
     [    5.058193] acpi PNP0A08:07: [Firmware Bug]: ECAM area [mem 
0xdbb00000-0xdbbfffff] not reserved in ACPI namespace
     [    5.058207] acpi PNP0A08:07: ECAM at [mem 0xdbb00000-0xdbbfffff] 
for [bus bb]
     [    5.058249] PCI host bridge to bus 0000:bb
     [    5.058251] pci_bus 0000:bb: root bus resource [mem 
0x200148800000-0x200148ffffff pref window]
     [    5.058253] pci_bus 0000:bb: root bus resource [bus bb]
     [    5.058265] pci 0000:bb:00.0: [19e5:a122] type 00 class 0x088000
     [    5.058273] pci 0000:bb:00.0: reg 0x18: [mem 
0x00000000-0x00003fff 64bit pref]
     [    5.063367] pci 0000:bb:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.063410] pci 0000:bb:00.0: BAR 2: assigned [mem 
0x200148800000-0x200148803fff 64bit pref]
     [    5.063413] pci_bus 0000:bb: resource 4 [mem 
0x200148800000-0x200148ffffff pref window]
     [    5.063458] ACPI: PCI Root Bridge [PCI8] (domain 0000 [bus ba])
     [    5.063461] acpi PNP0A08:08: _OSC: OS supports [ExtendedConfig 
ASPM ClockPM Segments MSI HPX-Type3]
     [    5.063465] acpi PNP0A08:08: _OSC failed (AE_NOT_FOUND); 
disabling ASPM
     [    5.064744] acpi PNP0A08:08: [Firmware Bug]: ECAM area [mem 
0xdba00000-0xdbafffff] not reserved in ACPI namespace
     [    5.064759] acpi PNP0A08:08: ECAM at [mem 0xdba00000-0xdbafffff] 
for [bus ba]
     [    5.064799] PCI host bridge to bus 0000:ba
     [    5.064802] pci_bus 0000:ba: root bus resource [mem 
0x20020c000000-0x20020c1fffff pref window]
     [    5.064803] pci_bus 0000:ba: root bus resource [bus ba]
     [    5.064841] pci_bus 0000:ba: resource 4 [mem 
0x20020c000000-0x20020c1fffff pref window]
     [    5.064880] ACPI: PCI Root Bridge [PCI9] (domain 0000 [bus b8-b9])
     [    5.064883] acpi PNP0A08:09: _OSC: OS supports [ExtendedConfig 
ASPM ClockPM Segments MSI HPX-Type3]
     [    5.064887] acpi PNP0A08:09: _OSC failed (AE_NOT_FOUND); 
disabling ASPM
     [    5.066161] acpi PNP0A08:09: [Firmware Bug]: ECAM area [mem 
0xdb800000-0xdb9fffff] not reserved in ACPI namespace
     [    5.066167] acpi PNP0A08:09: ECAM at [mem 0xdb800000-0xdb9fffff] 
for [bus b8-b9]
     [    5.066219] PCI host bridge to bus 0000:b8
     [    5.066221] pci_bus 0000:b8: root bus resource [mem 
0x200208000000-0x200208bfffff pref window]
     [    5.066223] pci_bus 0000:b8: root bus resource [bus b8-b9]
     [    5.066229] pci 0000:b8:00.0: [19e5:a121] type 01 class 0x060400
     [    5.066240] pci 0000:b8:00.0: enabling Extended Tags
     [    5.071319] pci 0000:b8:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.071328] pci 0000:b8:01.0: [19e5:a25a] type 00 class 0x010400
     [    5.071337] pci 0000:b8:01.0: reg 0x18: [mem 
0x200208800000-0x200208bfffff 64bit pref]
     [    5.076448] pci 0000:b8:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.076509] pci 0000:b9:00.0: [19e5:a258] type 00 class 0x100000
     [    5.076518] pci 0000:b9:00.0: reg 0x18: [mem 
0x200208000000-0x2002083fffff 64bit pref]
     [    5.076546] pci 0000:b9:00.0: reg 0x22c: [mem 
0x200208400000-0x20020840ffff 64bit pref]
     [    5.076548] pci 0000:b9:00.0: VF(n) BAR2 space: [mem 
0x200208400000-0x2002087effff 64bit pref] (contains BAR2 for 63 VFs)
     [    5.081666] pci 0000:b9:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.081683] pci 0000:b8:00.0: bridge window [mem 
0x00400000-0x007fffff 64bit pref] to [bus b9] add_size 400000 add_align 
400000
     [    5.081686] pci 0000:b8:00.0: BAR 15: assigned [mem 
0x200208000000-0x2002087fffff 64bit pref]
     [    5.081687] pci 0000:b8:01.0: BAR 2: assigned [mem 
0x200208800000-0x200208bfffff 64bit pref]
     [    5.081691] pci 0000:b9:00.0: BAR 2: assigned [mem 
0x200208000000-0x2002083fffff 64bit pref]
     [    5.081694] pci 0000:b9:00.0: BAR 9: assigned [mem 
0x200208400000-0x2002087effff 64bit pref]
     [    5.081697] pci 0000:b8:00.0: PCI bridge to [bus b9]
     [    5.081700] pci 0000:b8:00.0:   bridge window [mem 
0x200208000000-0x2002087fffff 64bit pref]
     [    5.081702] pci_bus 0000:b8: resource 4 [mem 
0x200208000000-0x200208bfffff pref window]
     [    5.081704] pci_bus 0000:b9: resource 2 [mem 
0x200208000000-0x2002087fffff 64bit pref]
     [    5.081753] ACPI: PCI Root Bridge [PCIA] (domain 0000 [bus bc-bd])
     [    5.081757] acpi PNP0A08:0a: _OSC: OS supports [ExtendedConfig 
ASPM ClockPM Segments MSI HPX-Type3]
     [    5.081760] acpi PNP0A08:0a: _OSC failed (AE_NOT_FOUND); 
disabling ASPM
     [    5.083071] acpi PNP0A08:0a: [Firmware Bug]: ECAM area [mem 
0xdbc00000-0xdbdfffff] not reserved in ACPI namespace
     [    5.083078] acpi PNP0A08:0a: ECAM at [mem 0xdbc00000-0xdbdfffff] 
for [bus bc-bd]
     [    5.083117] PCI host bridge to bus 0000:bc
     [    5.083120] pci_bus 0000:bc: root bus resource [mem 
0x200120000000-0x20013fffffff pref window]
     [    5.083122] pci_bus 0000:bc: root bus resource [bus bc-bd]
     [    5.083134] pci 0000:bc:00.0: [19e5:a121] type 01 class 0x060400
     [    5.083145] pci 0000:bc:00.0: enabling Extended Tags
     [    5.088205] pci 0000:bc:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.088287] pci 0000:bd:00.0: [19e5:a222] type 00 class 0x020000
     [    5.088294] pci 0000:bd:00.0: reg 0x10: [mem 
0x2001210f0000-0x2001210fffff 64bit pref]
     [    5.088298] pci 0000:bd:00.0: reg 0x18: [mem 
0x200120f00000-0x200120ffffff 64bit pref]
     [    5.088323] pci 0000:bd:00.0: reg 0x224: [mem 
0x2001210c0000-0x2001210cffff 64bit pref]
     [    5.088326] pci 0000:bd:00.0: VF(n) BAR0 space: [mem 
0x2001210c0000-0x2001210effff 64bit pref] (contains BAR0 for 3 VFs)
     [    5.088330] pci 0000:bd:00.0: reg 0x22c: [mem 
0x200120c00000-0x200120cfffff 64bit pref]
     [    5.088332] pci 0000:bd:00.0: VF(n) BAR2 space: [mem 
0x200120c00000-0x200120efffff 64bit pref] (contains BAR2 for 3 VFs)
     [    5.093410] pci 0000:bd:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.093423] pci 0000:bd:00.1: [19e5:a221] type 00 class 0x020000
     [    5.093430] pci 0000:bd:00.1: reg 0x10: [mem 
0x2001210b0000-0x2001210bffff 64bit pref]
     [    5.093434] pci 0000:bd:00.1: reg 0x18: [mem 
0x200120b00000-0x200120bfffff 64bit pref]
     [    5.093458] pci 0000:bd:00.1: reg 0x224: [mem 
0x200121080000-0x20012108ffff 64bit pref]
     [    5.093460] pci 0000:bd:00.1: VF(n) BAR0 space: [mem 
0x200121080000-0x2001210affff 64bit pref] (contains BAR0 for 3 VFs)
     [    5.093464] pci 0000:bd:00.1: reg 0x22c: [mem 
0x200120800000-0x2001208fffff 64bit pref]
     [    5.093466] pci 0000:bd:00.1: VF(n) BAR2 space: [mem 
0x200120800000-0x200120afffff 64bit pref] (contains BAR2 for 3 VFs)
     [    5.098516] pci 0000:bd:00.1: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.098530] pci 0000:bd:00.2: [19e5:a222] type 00 class 0x020000
     [    5.098536] pci 0000:bd:00.2: reg 0x10: [mem 
0x200121070000-0x20012107ffff 64bit pref]
     [    5.098541] pci 0000:bd:00.2: reg 0x18: [mem 
0x200120700000-0x2001207fffff 64bit pref]
     [    5.098564] pci 0000:bd:00.2: reg 0x224: [mem 
0x200121040000-0x20012104ffff 64bit pref]
     [    5.098567] pci 0000:bd:00.2: VF(n) BAR0 space: [mem 
0x200121040000-0x20012106ffff 64bit pref] (contains BAR0 for 3 VFs)
     [    5.098571] pci 0000:bd:00.2: reg 0x22c: [mem 
0x200120400000-0x2001204fffff 64bit pref]
     [    5.098573] pci 0000:bd:00.2: VF(n) BAR2 space: [mem 
0x200120400000-0x2001206fffff 64bit pref] (contains BAR2 for 3 VFs)
     [    5.103650] pci 0000:bd:00.2: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.103662] pci 0000:bd:00.3: [19e5:a221] type 00 class 0x020000
     [    5.103669] pci 0000:bd:00.3: reg 0x10: [mem 
0x200121030000-0x20012103ffff 64bit pref]
     [    5.103673] pci 0000:bd:00.3: reg 0x18: [mem 
0x200120300000-0x2001203fffff 64bit pref]
     [    5.103698] pci 0000:bd:00.3: reg 0x224: [mem 
0x200121000000-0x20012100ffff 64bit pref]
     [    5.103700] pci 0000:bd:00.3: VF(n) BAR0 space: [mem 
0x200121000000-0x20012102ffff 64bit pref] (contains BAR0 for 3 VFs)
     [    5.103704] pci 0000:bd:00.3: reg 0x22c: [mem 
0x200120000000-0x2001200fffff 64bit pref]
     [    5.103706] pci 0000:bd:00.3: VF(n) BAR2 space: [mem 
0x200120000000-0x2001202fffff 64bit pref] (contains BAR2 for 3 VFs)
     [    5.108758] pci 0000:bd:00.3: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.108777] pci 0000:bc:00.0: bridge window [mem 
0x00100000-0x005fffff 64bit pref] to [bus bd] add_size c00000 add_align 
100000
     [    5.108780] pci 0000:bc:00.0: BAR 15: assigned [mem 
0x200120000000-0x2001210fffff 64bit pref]
     [    5.108786] pci 0000:bd:00.0: BAR 2: assigned [mem 
0x200120000000-0x2001200fffff 64bit pref]
     [    5.108789] pci 0000:bd:00.0: BAR 9: assigned [mem 
0x200120100000-0x2001203fffff 64bit pref]
     [    5.108792] pci 0000:bd:00.1: BAR 2: assigned [mem 
0x200120400000-0x2001204fffff 64bit pref]
     [    5.108795] pci 0000:bd:00.1: BAR 9: assigned [mem 
0x200120500000-0x2001207fffff 64bit pref]
     [    5.108797] pci 0000:bd:00.2: BAR 2: assigned [mem 
0x200120800000-0x2001208fffff 64bit pref]
     [    5.108800] pci 0000:bd:00.2: BAR 9: assigned [mem 
0x200120900000-0x200120bfffff 64bit pref]
     [    5.108803] pci 0000:bd:00.3: BAR 2: assigned [mem 
0x200120c00000-0x200120cfffff 64bit pref]
     [    5.108806] pci 0000:bd:00.3: BAR 9: assigned [mem 
0x200120d00000-0x200120ffffff 64bit pref]
     [    5.108808] pci 0000:bd:00.0: BAR 0: assigned [mem 
0x200121000000-0x20012100ffff 64bit pref]
     [    5.108812] pci 0000:bd:00.0: BAR 7: assigned [mem 
0x200121010000-0x20012103ffff 64bit pref]
     [    5.108814] pci 0000:bd:00.1: BAR 0: assigned [mem 
0x200121040000-0x20012104ffff 64bit pref]
     [    5.108817] pci 0000:bd:00.1: BAR 7: assigned [mem 
0x200121050000-0x20012107ffff 64bit pref]
     [    5.108820] pci 0000:bd:00.2: BAR 0: assigned [mem 
0x200121080000-0x20012108ffff 64bit pref]
     [    5.108823] pci 0000:bd:00.2: BAR 7: assigned [mem 
0x200121090000-0x2001210bffff 64bit pref]
     [    5.108825] pci 0000:bd:00.3: BAR 0: assigned [mem 
0x2001210c0000-0x2001210cffff 64bit pref]
     [    5.108829] pci 0000:bd:00.3: BAR 7: assigned [mem 
0x2001210d0000-0x2001210fffff 64bit pref]
     [    5.108832] pci 0000:bc:00.0: PCI bridge to [bus bd]
     [    5.108835] pci 0000:bc:00.0:   bridge window [mem 
0x200120000000-0x2001210fffff 64bit pref]
     [    5.108838] pci_bus 0000:bc: resource 4 [mem 
0x200120000000-0x20013fffffff pref window]
     [    5.108840] pci_bus 0000:bd: resource 2 [mem 
0x200120000000-0x2001210fffff 64bit pref]
     [    5.108890] ACPI: PCI Root Bridge [PCIB] (domain 0000 [bus b4-b6])
     [    5.108894] acpi PNP0A08:0b: _OSC: OS supports [ExtendedConfig 
ASPM ClockPM Segments MSI HPX-Type3]
     [    5.108898] acpi PNP0A08:0b: _OSC failed (AE_NOT_FOUND); 
disabling ASPM
     [    5.110169] acpi PNP0A08:0b: [Firmware Bug]: ECAM area [mem 
0xdb400000-0xdb6fffff] not reserved in ACPI namespace
     [    5.110184] acpi PNP0A08:0b: ECAM at [mem 0xdb400000-0xdb6fffff] 
for [bus b4-b6]
     [    5.110251] PCI host bridge to bus 0000:b4
     [    5.110253] pci_bus 0000:b4: root bus resource [mem 
0x200141000000-0x200141ffffff pref window]
     [    5.110255] pci_bus 0000:b4: root bus resource [mem 
0x200144000000-0x200145ffffff pref window]
     [    5.110257] pci_bus 0000:b4: root bus resource [mem 
0xa3000000-0xa3ffffff window]
     [    5.110259] pci_bus 0000:b4: root bus resource [bus b4-b6]
     [    5.110265] pci 0000:b4:00.0: [19e5:a121] type 01 class 0x060400
     [    5.110276] pci 0000:b4:00.0: enabling Extended Tags
     [    5.115388] pci 0000:b4:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.115398] pci 0000:b4:01.0: [19e5:a121] type 01 class 0x060400
     [    5.115408] pci 0000:b4:01.0: enabling Extended Tags
     [    5.120486] pci 0000:b4:01.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.120494] pci 0000:b4:02.0: [19e5:a230] type 00 class 0x010700
     [    5.120507] pci 0000:b4:02.0: reg 0x24: [mem 0xa3008000-0xa300ffff]
     [    5.125617] pci 0000:b4:02.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.125628] pci 0000:b4:03.0: [19e5:a235] type 00 class 0x010601
     [    5.125641] pci 0000:b4:03.0: reg 0x24: [mem 0xa3010000-0xa3010fff]
     [    5.130704] pci 0000:b4:03.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.130712] pci 0000:b4:04.0: [19e5:a230] type 00 class 0x010700
     [    5.130725] pci 0000:b4:04.0: reg 0x24: [mem 0xa3000000-0xa3007fff]
     [    5.135828] pci 0000:b4:04.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.135892] pci 0000:b5:00.0: [19e5:a250] type 00 class 0x120000
     [    5.135901] pci 0000:b5:00.0: reg 0x18: [mem 
0x200144000000-0x2001443fffff 64bit pref]
     [    5.135929] pci 0000:b5:00.0: reg 0x22c: [mem 
0x200144400000-0x20014440ffff 64bit pref]
     [    5.135931] pci 0000:b5:00.0: VF(n) BAR2 space: [mem 
0x200144400000-0x2001447effff 64bit pref] (contains BAR2 for 63 VFs)
     [    5.141036] pci 0000:b5:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.141077] pci 0000:b6:00.0: [19e5:a255] type 00 class 0x100000
     [    5.141085] pci 0000:b6:00.0: reg 0x18: [mem 
0x200144800000-0x200144bfffff 64bit pref]
     [    5.141112] pci 0000:b6:00.0: reg 0x22c: [mem 
0x200144c00000-0x200144c0ffff 64bit pref]
     [    5.141114] pci 0000:b6:00.0: VF(n) BAR2 space: [mem 
0x200144c00000-0x200144feffff 64bit pref] (contains BAR2 for 63 VFs)
     [    5.146252] pci 0000:b6:00.0: Failed to add - passthrough or 
MSI/MSI-X might fail!
     [    5.146270] pci 0000:b4:00.0: bridge window [mem 
0x00400000-0x007fffff 64bit pref] to [bus b5] add_size 400000 add_align 
400000
     [    5.146272] pci 0000:b4:01.0: bridge window [mem 
0x00400000-0x007fffff 64bit pref] to [bus b6] add_size 400000 add_align 
400000
     [    5.146277] pci 0000:b4:00.0: BAR 15: assigned [mem 
0x200141000000-0x2001417fffff 64bit pref]
     [    5.146279] pci 0000:b4:01.0: BAR 15: assigned [mem 
0x200141800000-0x200141ffffff 64bit pref]
     [    5.146281] pci 0000:b4:02.0: BAR 5: assigned [mem 
0xa3000000-0xa3007fff]
     [    5.146283] pci 0000:b4:04.0: BAR 5: assigned [mem 
0xa3008000-0xa300ffff]
     [    5.146285] pci 0000:b4:03.0: BAR 5: assigned [mem 
0xa3010000-0xa3010fff]
     [    5.146289] pci 0000:b5:00.0: BAR 2: assigned [mem 
0x200141000000-0x2001413fffff 64bit pref]
     [    5.146292] pci 0000:b5:00.0: BAR 9: assigned [mem 
0x200141400000-0x2001417effff 64bit pref]
     [    5.146295] pci 0000:b4:00.0: PCI bridge to [bus b5]
     [    5.146298] pci 0000:b4:00.0:   bridge window [mem 
0x200141000000-0x2001417fffff 64bit pref]
     [    5.146301] pci 0000:b6:00.0: BAR 2: assigned [mem 
0x200141800000-0x200141bfffff 64bit pref]
     [    5.146305] pci 0000:b6:00.0: BAR 9: assigned [mem 
0x200141c00000-0x200141feffff 64bit pref]
     [    5.146307] pci 0000:b4:01.0: PCI bridge to [bus b6]
     [    5.146310] pci 0000:b4:01.0:   bridge window [mem 
0x200141800000-0x200141ffffff 64bit pref]
     [    5.146313] pci_bus 0000:b4: resource 4 [mem 
0x200141000000-0x200141ffffff pref window]
     [    5.146315] pci_bus 0000:b4: resource 5 [mem 
0x200144000000-0x200145ffffff pref window]
     [    5.146316] pci_bus 0000:b4: resource 6 [mem 
0xa3000000-0xa3ffffff window]
     [    5.146318] pci_bus 0000:b5: resource 2 [mem 
0x200141000000-0x2001417fffff 64bit pref]
     [    5.146320] pci_bus 0000:b6: resource 2 [mem 
0x200141800000-0x200141ffffff 64bit pref]
     [    5.156611] xen:balloon: Initialising balloon driver
     [    5.158173] iommu: Default domain type: Translated
     [    5.158302] pci 0000:0f:00.0: vgaarb: VGA device added: 
decodes=io+mem,owns=none,locks=none
     [    5.158314] pci 0000:0f:00.0: vgaarb: bridge control possible
     [    5.158318] pci 0000:0f:00.0: vgaarb: setting as boot device 
(VGA legacy resources not available)
     [    5.158319] vgaarb: loaded
     [    5.158495] SCSI subsystem initialized
     [    5.159917] ACPI: bus type USB registered
     [    5.159936] usbcore: registered new interface driver usbfs
     [    5.159945] usbcore: registered new interface driver hub
     [    5.162701] usbcore: registered new device driver usb
     [    5.163012] pps_core: LinuxPPS API ver. 1 registered
     [    5.163014] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 
Rodolfo Giometti <giometti@linux.it>
     [    5.163017] PTP clock support registered
     [    5.163060] EDAC MC: Ver: 3.0.0
     [    5.163272] Registered efivars operations
     [    5.163481] No ACPI PMU IRQ for CPU0
     [    5.163483] No ACPI PMU IRQ for CPU1
     [    5.163484] No ACPI PMU IRQ for CPU2
     [    5.163485] No ACPI PMU IRQ for CPU3
     [    5.163485] No ACPI PMU IRQ for CPU4
     [    5.163486] No ACPI PMU IRQ for CPU5
     [    5.163487] No ACPI PMU IRQ for CPU6
     [    5.163488] No ACPI PMU IRQ for CPU7
     [    5.163489] No ACPI PMU IRQ for CPU8
     [    5.163490] No ACPI PMU IRQ for CPU9
     [    5.163491] No ACPI PMU IRQ for CPU10
     [    5.163492] No ACPI PMU IRQ for CPU11
     [    5.163493] No ACPI PMU IRQ for CPU12
     [    5.163494] No ACPI PMU IRQ for CPU13
     [    5.163495] No ACPI PMU IRQ for CPU14
     [    5.163496] No ACPI PMU IRQ for CPU15
     [    5.163497] No ACPI PMU IRQ for CPU16
     [    5.163497] No ACPI PMU IRQ for CPU17
     [    5.163498] No ACPI PMU IRQ for CPU18
     [    5.163499] No ACPI PMU IRQ for CPU19
     [    5.163500] No ACPI PMU IRQ for CPU20
     [    5.163501] No ACPI PMU IRQ for CPU21
     [    5.163502] No ACPI PMU IRQ for CPU22
     [    5.163503] No ACPI PMU IRQ for CPU23
     [    5.163504] No ACPI PMU IRQ for CPU24
     [    5.163505] No ACPI PMU IRQ for CPU25
     [    5.163506] No ACPI PMU IRQ for CPU26
     [    5.163506] No ACPI PMU IRQ for CPU27
     [    5.163507] No ACPI PMU IRQ for CPU28
     [    5.163508] No ACPI PMU IRQ for CPU29
     [    5.163509] No ACPI PMU IRQ for CPU30
     [    5.163510] No ACPI PMU IRQ for CPU31
     [    5.163511] No ACPI PMU IRQ for CPU32
     [    5.163512] No ACPI PMU IRQ for CPU33
     [    5.163513] No ACPI PMU IRQ for CPU34
     [    5.163514] No ACPI PMU IRQ for CPU35
     [    5.163515] No ACPI PMU IRQ for CPU36
     [    5.163516] No ACPI PMU IRQ for CPU37
     [    5.163517] No ACPI PMU IRQ for CPU38
     [    5.163518] No ACPI PMU IRQ for CPU39
     [    5.163519] No ACPI PMU IRQ for CPU40
     [    5.163520] No ACPI PMU IRQ for CPU41
     [    5.163520] No ACPI PMU IRQ for CPU42
     [    5.163521] No ACPI PMU IRQ for CPU43
     [    5.163522] No ACPI PMU IRQ for CPU44
     [    5.163523] No ACPI PMU IRQ for CPU45
     [    5.163524] No ACPI PMU IRQ for CPU46
     [    5.163525] No ACPI PMU IRQ for CPU47
     [    5.163526] No ACPI PMU IRQ for CPU48
     [    5.163527] No ACPI PMU IRQ for CPU49
     [    5.163528] No ACPI PMU IRQ for CPU50
     [    5.163529] No ACPI PMU IRQ for CPU51
     [    5.163530] No ACPI PMU IRQ for CPU52
     [    5.163531] No ACPI PMU IRQ for CPU53
     [    5.163532] No ACPI PMU IRQ for CPU54
     [    5.163532] No ACPI PMU IRQ for CPU55
     [    5.163533] No ACPI PMU IRQ for CPU56
     [    5.163534] No ACPI PMU IRQ for CPU57
     [    5.163535] No ACPI PMU IRQ for CPU58
     [    5.163536] No ACPI PMU IRQ for CPU59
     [    5.163537] No ACPI PMU IRQ for CPU60
     [    5.163538] No ACPI PMU IRQ for CPU61
     [    5.163539] No ACPI PMU IRQ for CPU62
     [    5.163540] No ACPI PMU IRQ for CPU63
     [    5.163541] No ACPI PMU IRQ for CPU64
     [    5.163542] No ACPI PMU IRQ for CPU65
     [    5.163543] No ACPI PMU IRQ for CPU66
     [    5.163544] No ACPI PMU IRQ for CPU67
     [    5.163545] No ACPI PMU IRQ for CPU68
     [    5.163546] No ACPI PMU IRQ for CPU69
     [    5.163547] No ACPI PMU IRQ for CPU70
     [    5.163548] No ACPI PMU IRQ for CPU71
     [    5.163548] No ACPI PMU IRQ for CPU72
     [    5.163549] No ACPI PMU IRQ for CPU73
     [    5.163550] No ACPI PMU IRQ for CPU74
     [    5.163551] No ACPI PMU IRQ for CPU75
     [    5.163552] No ACPI PMU IRQ for CPU76
     [    5.163553] No ACPI PMU IRQ for CPU77
     [    5.163554] No ACPI PMU IRQ for CPU78
     [    5.163555] No ACPI PMU IRQ for CPU79
     [    5.163556] No ACPI PMU IRQ for CPU80
     [    5.163557] No ACPI PMU IRQ for CPU81
     [    5.163558] No ACPI PMU IRQ for CPU82
     [    5.163558] No ACPI PMU IRQ for CPU83
     [    5.163559] No ACPI PMU IRQ for CPU84
     [    5.163560] No ACPI PMU IRQ for CPU85
     [    5.163561] No ACPI PMU IRQ for CPU86
     [    5.163562] No ACPI PMU IRQ for CPU87
     [    5.163563] No ACPI PMU IRQ for CPU88
     [    5.163564] No ACPI PMU IRQ for CPU89
     [    5.163565] No ACPI PMU IRQ for CPU90
     [    5.163566] No ACPI PMU IRQ for CPU91
     [    5.163567] No ACPI PMU IRQ for CPU92
     [    5.163568] No ACPI PMU IRQ for CPU93
     [    5.163568] No ACPI PMU IRQ for CPU94
     [    5.163569] No ACPI PMU IRQ for CPU95
     [    5.163570] No ACPI PMU IRQ for CPU96
     [    5.163571] No ACPI PMU IRQ for CPU97
     [    5.163572] No ACPI PMU IRQ for CPU98
     [    5.163573] No ACPI PMU IRQ for CPU99
     [    5.163574] No ACPI PMU IRQ for CPU100
     [    5.163575] No ACPI PMU IRQ for CPU101
     [    5.163576] No ACPI PMU IRQ for CPU102
     [    5.163577] No ACPI PMU IRQ for CPU103
     [    5.163578] No ACPI PMU IRQ for CPU104
     [    5.163579] No ACPI PMU IRQ for CPU105
     [    5.163580] No ACPI PMU IRQ for CPU106
     [    5.163581] No ACPI PMU IRQ for CPU107
     [    5.163581] No ACPI PMU IRQ for CPU108
     [    5.163582] No ACPI PMU IRQ for CPU109
     [    5.163583] No ACPI PMU IRQ for CPU110
     [    5.163584] No ACPI PMU IRQ for CPU111
     [    5.163585] No ACPI PMU IRQ for CPU112
     [    5.163586] No ACPI PMU IRQ for CPU113
     [    5.163587] No ACPI PMU IRQ for CPU114
     [    5.163588] No ACPI PMU IRQ for CPU115
     [    5.163589] No ACPI PMU IRQ for CPU116
     [    5.163590] No ACPI PMU IRQ for CPU117
     [    5.163591] No ACPI PMU IRQ for CPU118
     [    5.163591] No ACPI PMU IRQ for CPU119
     [    5.163592] No ACPI PMU IRQ for CPU120
     [    5.163593] No ACPI PMU IRQ for CPU121
     [    5.163594] No ACPI PMU IRQ for CPU122
     [    5.163595] No ACPI PMU IRQ for CPU123
     [    5.163596] No ACPI PMU IRQ for CPU124
     [    5.163597] No ACPI PMU IRQ for CPU125
     [    5.163598] No ACPI PMU IRQ for CPU126
     [    5.163599] No ACPI PMU IRQ for CPU127
     [    5.167918] FPGA manager framework
     [    5.167935] Advanced Linux Sound Architecture Driver Initialized.
     [    5.172363] clocksource: Switched to clocksource arch_sys_counter
     [    5.178092] VFS: Disk quotas dquot_6.6.0
     [    5.178133] VFS: Dquot-cache hash table entries: 512 (order 0, 
4096 bytes)
     [    5.178275] pnp: PnP ACPI init
     [    5.179627] pnp: PnP ACPI: found 1 devices
     [    5.183211] NET: Registered protocol family 2
     [    5.183399] tcp_listen_portaddr_hash hash table entries: 2048 
(order: 3, 32768 bytes, vmalloc)
     [    5.183437] TCP established hash table entries: 32768 (order: 6, 
262144 bytes, vmalloc)
     [    5.183546] TCP bind hash table entries: 32768 (order: 7, 524288 
bytes, vmalloc)
     [    5.183656] TCP: Hash tables configured (established 32768 bind 
32768)
     [    5.183777] UDP hash table entries: 2048 (order: 4, 65536 bytes, 
vmalloc)
     [    5.183800] UDP-Lite hash table entries: 2048 (order: 4, 65536 
bytes, vmalloc)
     [    5.184255] NET: Registered protocol family 1
     [    5.184974] RPC: Registered named UNIX socket transport module.
     [    5.184977] RPC: Registered udp transport module.
     [    5.184978] RPC: Registered tcp transport module.
     [    5.184979] RPC: Registered tcp NFSv4.1 backchannel transport 
module.
     [    5.185028] pci 0000:7a:00.0: enabling device (0000 -> 0002)
     [    5.185059] pci 0000:7a:02.0: enabling device (0000 -> 0002)
     [    5.185136] PCI: CLS 32 bytes, default 64
     [    5.195626] hw perfevents: enabled with armv8_pmuv3_0 PMU 
driver, 1 counters available
     [    5.195637] kvm [1]: HYP mode not available
     [    5.200208] Initialise system trusted keyrings
     [    5.200321] workingset: timestamp_bits=44 max_order=20 
bucket_order=0
     [    5.201479] squashfs: version 4.0 (2009/01/31) Phillip Lougher
     [    5.203960] NFS: Registering the id_resolver key type
     [    5.203965] Key type id_resolver registered
     [    5.203966] Key type id_legacy registered
     [    5.203969] nfs4filelayout_init: NFSv4 File Layout Driver 
Registering...
     [    5.204009] 9p: Installing v9fs 9p2000 file system support
     [    5.208516] Key type asymmetric registered
     [    5.208517] Asymmetric key parser 'x509' registered
     [    5.208526] Block layer SCSI generic (bsg) driver version 0.4 
loaded (major 245)
     [    5.208528] io scheduler mq-deadline registered
     [    5.208529] io scheduler kyber registered
     [    5.219660] gpio-dwapb HISI0181:00: IRQ index 1 not found
     [    5.219662] gpio-dwapb HISI0181:00: IRQ index 2 not found
     [    5.219664] gpio-dwapb HISI0181:00: IRQ index 3 not found
     [    5.219665] gpio-dwapb HISI0181:00: IRQ index 4 not found
     [    5.219667] gpio-dwapb HISI0181:00: IRQ index 5 not found
     [    5.219668] gpio-dwapb HISI0181:00: IRQ index 6 not found
     [    5.219670] gpio-dwapb HISI0181:00: IRQ index 7 not found
     [    5.219671] gpio-dwapb HISI0181:00: IRQ index 8 not found
     [    5.219673] gpio-dwapb HISI0181:00: IRQ index 9 not found
     [    5.219674] gpio-dwapb HISI0181:00: IRQ index 10 not found
     [    5.219675] gpio-dwapb HISI0181:00: IRQ index 11 not found
     [    5.219677] gpio-dwapb HISI0181:00: IRQ index 12 not found
     [    5.219678] gpio-dwapb HISI0181:00: IRQ index 13 not found
     [    5.219679] gpio-dwapb HISI0181:00: IRQ index 14 not found
     [    5.219681] gpio-dwapb HISI0181:00: IRQ index 15 not found
     [    5.219682] gpio-dwapb HISI0181:00: IRQ index 16 not found
     [    5.219683] gpio-dwapb HISI0181:00: IRQ index 17 not found
     [    5.219685] gpio-dwapb HISI0181:00: IRQ index 18 not found
     [    5.219686] gpio-dwapb HISI0181:00: IRQ index 19 not found
     [    5.219687] gpio-dwapb HISI0181:00: IRQ index 20 not found
     [    5.219689] gpio-dwapb HISI0181:00: IRQ index 21 not found
     [    5.219690] gpio-dwapb HISI0181:00: IRQ index 22 not found
     [    5.219691] gpio-dwapb HISI0181:00: IRQ index 23 not found
     [    5.219692] gpio-dwapb HISI0181:00: IRQ index 24 not found
     [    5.219694] gpio-dwapb HISI0181:00: IRQ index 25 not found
     [    5.219695] gpio-dwapb HISI0181:00: IRQ index 26 not found
     [    5.219696] gpio-dwapb HISI0181:00: IRQ index 27 not found
     [    5.219697] gpio-dwapb HISI0181:00: IRQ index 28 not found
     [    5.219698] gpio-dwapb HISI0181:00: IRQ index 29 not found
     [    5.219700] gpio-dwapb HISI0181:00: IRQ index 30 not found
     [    5.219701] gpio-dwapb HISI0181:00: IRQ index 31 not found
     [    5.221487] pcieport 0000:00:00.0: PME: Signaling with IRQ 48
     [    5.221592] pcieport 0000:00:00.0: AER: enabled with IRQ 49
     [    5.222461] pcieport 0000:00:08.0: PME: Signaling with IRQ 50
     [    5.222552] pcieport 0000:00:08.0: AER: enabled with IRQ 51
     [    5.223395] pcieport 0000:00:0c.0: PME: Signaling with IRQ 52
     [    5.223490] pcieport 0000:00:0c.0: AER: enabled with IRQ 53
     [    5.224331] pcieport 0000:00:10.0: PME: Signaling with IRQ 54
     [    5.224417] pcieport 0000:00:10.0: AER: enabled with IRQ 55
     [    5.225271] pcieport 0000:00:11.0: PME: Signaling with IRQ 56
     [    5.225360] pcieport 0000:00:11.0: AER: enabled with IRQ 57
     [    5.226200] pcieport 0000:00:12.0: PME: Signaling with IRQ 58
     [    5.226287] pcieport 0000:00:12.0: AER: enabled with IRQ 59
     [    5.227769] pcieport 0000:80:00.0: PME: Signaling with IRQ 60
     [    5.227913] pcieport 0000:80:00.0: AER: enabled with IRQ 61
     [    5.228825] pcieport 0000:80:04.0: PME: Signaling with IRQ 62
     [    5.228949] pcieport 0000:80:04.0: AER: enabled with IRQ 63
     [    5.229884] pcieport 0000:80:08.0: PME: Signaling with IRQ 64
     [    5.230006] pcieport 0000:80:08.0: AER: enabled with IRQ 65
     [    5.230898] pcieport 0000:80:0c.0: PME: Signaling with IRQ 66
     [    5.231020] pcieport 0000:80:0c.0: AER: enabled with IRQ 67
     [    5.231911] pcieport 0000:80:10.0: PME: Signaling with IRQ 68
     [    5.232037] pcieport 0000:80:10.0: AER: enabled with IRQ 69
     [    5.234018] input: Power Button as 
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
     [    5.234041] ACPI: Power Button [PWRB]
     [    5.238386] ERST: Error Record Serialization Table (ERST) 
support is initialized.
     [    5.238390] pstore: Registered erst as persistent store backend
     [    5.238415] ghes_edac: This system has a very crappy BIOS: It 
doesn't even list the DIMMS.
     [    5.238417] ghes_edac: Its SMBIOS info is wrong. It is doubtful 
that the error report would
     [    5.238418] ghes_edac: work on such system. Use this driver with 
caution
     [    5.238445] EDAC MC0: Giving out device to module ghes_edac.c 
controller ghes_edac: DEV ghes (INTERRUPT)
     [    5.238683] GHES: APEI firmware first mode is enabled by APEI 
bit and WHEA _OSC.
     [    5.238721] EINJ: Error INJection is initialized.
     [    5.238806] ACPI GTDT: found 1 SBSA generic Watchdog(s).
     [    5.241832] xen:xen_evtchn: Event-channel device installed
     [    5.243902] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
     [    5.264369] 00:00: ttyS0 at MMIO 0x3f00002f8 (irq = 9, base_baud 
= 115200) is a 16550A
     [   38.054861] printk: console [ttyS0] enabled
     [   38.059972] SuperH (H)SCI(F) driver initialized
     [   38.064676] msm_serial: driver initialized
     [   38.096555] loop: module loaded
     [   38.101924] hisi_sas_v3_hw 0000:74:02.0: enabling device (0000 
-> 0002)
     [   38.115278] scsi host0: hisi_sas_v3_hw
     [   40.329311] hisi_sas_v3_hw 0000:74:04.0: enabling device (0000 
-> 0002)
     [   40.342125] scsi host1: hisi_sas_v3_hw
     [   42.565773] scsi host2: hisi_sas_v3_hw
     [   43.782678] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy0 
link_rate=10(sata)
     [   43.789272] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy1 
link_rate=10(sata)
     [   43.796057] hisi_sas_v3_hw 0000:b4:02.0: dev[1:5] found
     [   43.802830] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
     [   43.810726] hisi_sas_v3_hw 0000:b4:02.0: phydown: phy0 phy_state=0x2
     [   43.817053] hisi_sas_v3_hw 0000:b4:02.0: ignore flutter phy0 down
     [   43.967245] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy0 
link_rate=10(sata)
     [   44.135135] ata1.00: ATA-11: SAMSUNG MZ7LH960HAJR-00005, 
HXT7404Q, max UDMA/133
     [   44.142416] ata1.00: 1875385008 sectors, multi 16: LBA48 NCQ 
(depth 32)
     [   44.150896] ata1.00: configured for UDMA/133
     [   44.155167] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 
0 tries: 1
     [   44.165633] scsi 2:0:0:0: Direct-Access     ATA      SAMSUNG 
MZ7LH960 404Q PQ: 0 ANSI: 5
     [   44.173957] hisi_sas_v3_hw 0000:b4:02.0: dev[2:5] found
     [   44.174238] sd 2:0:0:0: [sda] 1875385008 512-byte logical 
blocks: (960 GB/894 GiB)
     [   44.180614] sas: Enter sas_scsi_recover_host busy: 0 failed: 0
     [   44.186721] sd 2:0:0:0: [sda] 4096-byte physical blocks
     [   44.194513] hisi_sas_v3_hw 0000:b4:02.0: phydown: phy1 phy_state=0x1
     [   44.194516] hisi_sas_v3_hw 0000:b4:02.0: ignore flutter phy1 down
     [   44.351132] hisi_sas_v3_hw 0000:b4:02.0: phyup: phy1 
link_rate=10(sata)
     [   44.518914] ata2.00: ATA-11: SAMSUNG MZ7LH960HAJR-00005, 
HXT7404Q, max UDMA/133
     [   44.526193] ata2.00: 1875385008 sectors, multi 16: LBA48 NCQ 
(depth 32)
     [   44.534454] ata2.00: configured for UDMA/133
     [   44.538727] sas: --- Exit sas_scsi_recover_host: busy: 0 failed: 
0 tries: 1
     [   44.545703] sd 2:0:0:0: [sda] Write Protect is off
     [   44.549151] scsi 2:0:1:0: Direct-Access     ATA      SAMSUNG 
MZ7LH960 404Q PQ: 0 ANSI: 5
     [   44.558568] sd 2:0:0:0: [sda] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA
     [   44.558901] sd 2:0:1:0: [sdb] 1875385008 512-byte logical 
blocks: (960 GB/894 GiB)
     [   44.558903] sd 2:0:1:0: [sdb] 4096-byte physical blocks
     [   44.558911] sd 2:0:1:0: [sdb] Write Protect is off
     [   44.558923] sd 2:0:1:0: [sdb] Write cache: enabled, read cache: 
enabled, doesn't support DPO or FUA
     [   44.594141] sas: sas_form_port: phy0 belongs to port0 already(1)!
     [   44.595391]  sdb: sdb1 sdb2 < >
     [   44.600214] sas: sas_form_port: phy1 belongs to port1 already(1)!
     [   44.610862] sd 2:0:1:0: [sdb] Attached SCSI disk
     [   44.611982]  sda: sda1 sda2 sda3 sda4 sda5
     [   44.621144] sd 2:0:0:0: [sda] Attached SCSI disk
     [   44.790594] cma: cma_alloc: alloc failed, req-size: 64 pages, 
ret: -12
     [   44.797125] cma: cma_alloc: alloc failed, req-size: 16 pages, 
ret: -12
     [   44.803631] cma: cma_alloc: alloc failed, req-size: 64 pages, 
ret: -12
     [   44.810151] cma: cma_alloc: alloc failed, req-size: 16 pages, 
ret: -12
     [   44.816656] cma: cma_alloc: alloc failed, req-size: 64 pages, 
ret: -12
     [   44.823175] cma: cma_alloc: alloc failed, req-size: 16 pages, 
ret: -12
     [   44.829684] cma: cma_alloc: alloc failed, req-size: 64 pages, 
ret: -12
     [   44.836206] cma: cma_alloc: alloc failed, req-size: 16 pages, 
ret: -12
     [   44.842711] cma: cma_alloc: alloc failed, req-size: 64 pages, 
ret: -12
     [   44.849233] cma: cma_alloc: alloc failed, req-size: 16 pages, 
ret: -12
     [   44.855738] cma: cma_alloc: alloc failed, req-size: 64 pages, 
ret: -12
     [   44.862256] cma: cma_alloc: alloc failed, req-size: 16 pages, 
ret: -12
     [   44.868766] cma: cma_alloc: alloc failed, req-size: 64 pages, 
ret: -12
     [   44.875287] cma: cma_alloc: alloc failed, req-size: 16 pages, 
ret: -12
     [   44.881791] cma: cma_alloc: alloc failed, req-size: 64 pages, 
ret: -12
     [   44.888311] cma: cma_alloc: alloc failed, req-size: 16 pages, 
ret: -12
     [   44.894817] cma: cma_alloc: alloc failed, req-size: 32 pages, 
ret: -12
     [   44.905701] cma: cma_alloc: alloc failed, req-size: 32 pages, 
ret: -12
     [   44.912215] cma: cma_alloc: alloc failed, req-size: 128 pages, 
ret: -12
     [   44.918849] cma: cma_alloc: alloc failed, req-size: 1024 pages, 
ret: -12
     [   44.926129] scsi host3: hisi_sas_v3_hw
     [   47.141627] ahci 0000:74:03.0: SSS flag set, parallel bus scan 
disabled
     [   47.148249] ahci 0000:74:03.0: AHCI 0001.0300 32 slots 2 ports 6 
Gbps 0x3 impl SATA mode
     [   47.156305] ahci 0000:74:03.0: flags: 64bit ncq sntf stag pm led 
clo only pmp fbs slum part ccc ems sxs boh
     [   47.166105] cma: cma_alloc: alloc failed, req-size: 32 pages, 
ret: -12
     [   47.172624] cma: cma_alloc: alloc failed, req-size: 32 pages, 
ret: -12
     [   47.179466] scsi host4: ahci
     [   47.182649] scsi host5: ahci
     [   47.185643] ata3: SATA max UDMA/133 abar m4096@0xa2010000 port 
0xa2010100 irq 200
     [   47.193094] ata4: SATA max UDMA/133 abar m4096@0xa2010000 port 
0xa2010180 irq 201
     [   47.200791] ahci 0000:b4:03.0: SSS flag set, parallel bus scan 
disabled
     [   47.207401] ahci 0000:b4:03.0: AHCI 0001.0300 32 slots 2 ports 6 
Gbps 0x3 impl SATA mode
     [   47.215460] ahci 0000:b4:03.0: flags: 64bit ncq sntf stag pm led 
clo only pmp fbs slum part ccc ems sxs boh
     [   47.225258] cma: cma_alloc: alloc failed, req-size: 32 pages, 
ret: -12
     [   47.231776] cma: cma_alloc: alloc failed, req-size: 32 pages, 
ret: -12
     [   47.238560] scsi host6: ahci
     [   47.241695] scsi host7: ahci
     [   47.244711] ata5: SATA max UDMA/133 abar m4096@0xa3010000 port 
0xa3010100 irq 202
     [   47.252167] ata6: SATA max UDMA/133 abar m4096@0xa3010000 port 
0xa3010180 irq 203
     [   47.261200] libphy: Fixed MDIO Bus: probed
     [   47.265379] tun: Universal TUN/TAP device driver, 1.6
     [   47.270737] thunder_xcv, ver 1.0
     [   47.273973] thunder_bgx, ver 1.0
     [   47.277197] nicpf, ver 1.0
     [   47.280177] hclge is initializing
     [   47.283481] hns3: Hisilicon Ethernet Network Driver for Hip08 
Family - version
     [   47.290670] hns3: Copyright (c) 2017 Huawei Corporation.
     [   47.296068] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.302488] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.308920] hns3 0000:7d:00.0: The firmware version is 1.9.23.6
     [   47.318071] libphy: hisilicon MII bus: probed
     [   47.418118] hns3 0000:7d:00.0: hclge driver initialization finished.
     [   47.424513] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.430934] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.437588] Generic PHY mii-0000:7d:00.0:01: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:7d:00.0:01, irq=POLL)
     [   47.449304] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.455720] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.462151] hns3 0000:7d:00.1: The firmware version is 1.9.23.6
     [   47.469705] libphy: hisilicon MII bus: probed
     [   47.515414] ata3: SATA link down (SStatus 0 SControl 300)
     [   47.549896] hns3 0000:7d:00.1: hclge driver initialization finished.
     [   47.556286] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.562708] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.569355] Generic PHY mii-0000:7d:00.1:03: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:7d:00.1:03, irq=POLL)
     [   47.571503] ata5: SATA link down (SStatus 0 SControl 300)
     [   47.581039] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.592583] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.599015] hns3 0000:7d:00.2: The firmware version is 1.9.23.6
     [   47.607934] libphy: hisilicon MII bus: probed
     [   47.686118] hns3 0000:7d:00.2: hclge driver initialization finished.
     [   47.692511] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.698932] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.705577] Generic PHY mii-0000:7d:00.2:05: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:7d:00.2:05, irq=POLL)
     [   47.717278] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.723697] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.730127] hns3 0000:7d:00.3: The firmware version is 1.9.23.6
     [   47.737681] libphy: hisilicon MII bus: probed
     [   47.817899] hns3 0000:7d:00.3: hclge driver initialization finished.
     [   47.824290] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.830711] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.835476] ata4: SATA link down (SStatus 0 SControl 300)
     [   47.837367] Generic PHY mii-0000:7d:00.3:07: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:7d:00.3:07, irq=POLL)
     [   47.854234] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.860658] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.867096] hns3 0000:bd:00.0: The firmware version is 1.9.23.6
     [   47.876237] libphy: hisilicon MII bus: probed
     [   47.954128] hns3 0000:bd:00.0: hclge driver initialization finished.
     [   47.960530] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.966950] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.973600] Generic PHY mii-0000:bd:00.0:01: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:bd:00.0:01, irq=POLL)
     [   47.985399] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.991819] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   47.998248] hns3 0000:bd:00.1: The firmware version is 1.9.23.6
     [   48.005781] libphy: hisilicon MII bus: probed
     [   48.085894] hns3 0000:bd:00.1: hclge driver initialization finished.
     [   48.092284] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   48.098705] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   48.105361] Generic PHY mii-0000:bd:00.1:03: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:bd:00.1:03, irq=POLL)
     [   48.117080] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   48.123500] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   48.129930] hns3 0000:bd:00.2: The firmware version is 1.9.23.6
     [   48.138890] libphy: hisilicon MII bus: probed
     [   48.155421] ata6: SATA link down (SStatus 0 SControl 300)
     [   48.218120] hns3 0000:bd:00.2: hclge driver initialization finished.
     [   48.224511] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   48.230936] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   48.237590] Generic PHY mii-0000:bd:00.2:05: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:bd:00.2:05, irq=POLL)
     [   48.249313] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   48.255731] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   48.262161] hns3 0000:bd:00.3: The firmware version is 1.9.23.6
     [   48.269770] libphy: hisilicon MII bus: probed
     [   48.349902] hns3 0000:bd:00.3: hclge driver initialization finished.
     [   48.356295] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   48.362716] cma: cma_alloc: alloc failed, req-size: 8 pages, 
ret: -12
     [   48.369379] Generic PHY mii-0000:bd:00.3:07: attached PHY driver 
[Generic PHY] (mii_bus:phy_addr=mii-0000:bd:00.3:07, irq=POLL)
     [   48.381034] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
     [   48.386849] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
     [   48.392774] igb: Intel(R) Gigabit Ethernet Network Driver - 
version 5.6.0-k
     [   48.399705] igb: Copyright (c) 2007-2014 Intel Corporation.
     [   48.405273] igbvf: Intel(R) Gigabit Virtual Function Network 
Driver - version 2.4.0-k
     [   48.413068] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
     [   48.419224] sky2: driver version 1.30
     [   48.423136] xen_netfront: Initialising Xen virtual ethernet driver
     [   48.429375] VFIO - User Level meta-driver version: 0.3
     [   48.435166] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) 
Driver
     [   48.441677] ehci-pci: EHCI PCI platform driver
     [   48.446255] ehci-pci 0000:7a:01.0: EHCI Host Controller
     [   48.451475] ehci-pci 0000:7a:01.0: new USB bus registered, 
assigned bus number 1
     [   48.458886] ehci-pci 0000:7a:01.0: irq 47, io mem 0x20c101000
     [   48.477231] ehci-pci 0000:7a:01.0: USB 0.0 started, EHCI 1.00
     [   48.483087] hub 1-0:1.0: USB hub found
     [   48.486826] hub 1-0:1.0: 2 ports detected
     [   48.490926] ehci-platform: EHCI generic platform driver
     [   48.496203] ehci-orion: EHCI orion driver
     [   48.500244] ehci-exynos: EHCI EXYNOS driver
     [   48.504455] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
     [   48.510613] ohci-pci: OHCI PCI platform driver
     [   48.515109] ohci-pci 0000:7a:00.0: OHCI PCI host controller
     [   48.520670] ohci-pci 0000:7a:00.0: new USB bus registered, 
assigned bus number 2
     [   48.528056] ohci-pci 0000:7a:00.0: irq 47, io mem 0x20c100000
     [   48.597363] hub 2-0:1.0: USB hub found
     [   48.601099] hub 2-0:1.0: 2 ports detected
     [   48.605187] ohci-platform: OHCI generic platform driver
     [   48.610441] ohci-exynos: OHCI EXYNOS driver
     [   48.614738] xhci_hcd 0000:7a:02.0: xHCI Host Controller
     [   48.619953] xhci_hcd 0000:7a:02.0: new USB bus registered, 
assigned bus number 3
     [   48.627403] xhci_hcd 0000:7a:02.0: hcc params 0x0220f66d hci 
version 0x100 quirks 0x0000000000000010
     [   48.636780] hub 3-0:1.0: USB hub found
     [   48.640523] hub 3-0:1.0: 1 port detected
     [   48.644489] xhci_hcd 0000:7a:02.0: xHCI Host Controller
     [   48.649702] xhci_hcd 0000:7a:02.0: new USB bus registered, 
assigned bus number 4
     [   48.657066] xhci_hcd 0000:7a:02.0: Host supports USB 3.0 SuperSpeed
     [   48.663322] usb usb4: We don't know the algorithms for LPM for 
this host, disabling LPM.
     [   48.671464] hub 4-0:1.0: USB hub found
     [   48.675204] hub 4-0:1.0: 1 port detected
     [   48.679301] usbcore: registered new interface driver usb-storage
     [   48.686526] i2c /dev entries driver
     [   48.691869] sdhci: Secure Digital Host Controller Interface driver
     [   48.698024] sdhci: Copyright(c) Pierre Ossman
     [   48.702577] Synopsys Designware Multimedia Card Interface Driver
     [   48.708879] sdhci-pltfm: SDHCI platform and OF driver helper
     [   48.720106] ledtrig-cpu: registered to indicate activity on CPUs
     [   48.726664] usbcore: registered new interface driver usbhid
     [   48.732221] usbhid: USB HID core driver
     [   48.825234] usb 1-1: new high-speed USB device number 2 using 
ehci-pci
     [   48.960607] NET: Registered protocol family 17
     [   48.965089] 9pnet: Installing 9P2000 support
     [   48.969361] Key type dns_resolver registered
     [   48.973704] registered taskstats version 1
     [   48.977227] usb 3-1: new high-speed USB device number 2 using 
xhci_hcd
     [   48.977786] Loading compiled-in X.509 certificates
     [   48.989149] pstore: Using crash dump compression: deflate
     [   48.994267] hub 1-1:1.0: USB hub found
     [   48.995199] hctosys: unable to open rtc device (rtc0)
     [   48.998873] hub 1-1:1.0: 4 ports detected
     [   49.003315] ALSA device list:
     [   49.010251]   No soundcards found.
     [   49.017993] random: fast init done
     [   49.071718] EXT4-fs (sdb1): recovery complete
     [   49.076169] EXT4-fs (sdb1): mounted filesystem with ordered data 
mode. Opts: (null)
     [   49.083828] VFS: Mounted root (ext4 filesystem) on device 8:17.
     [   49.090401] devtmpfs: mounted
     [   49.094997] Freeing unused kernel memory: 5184K
     [   49.099602] Run /sbin/init as init process
     [   49.130347] systemd[1]: System time before build time, advancing 
clock.
     [   49.139847] efivars: get_next_variable: status=8000000000000003
     [   49.148510] random: systemd: uninitialized urandom read (16 
bytes read)
     [   49.156111] random: systemd: uninitialized urandom read (16 
bytes read)
     [   49.175485] hub 3-1:1.0: USB hub found
     [   49.179748] hub 3-1:1.0: 4 ports detected
     [   49.185720] systemd[1]: systemd 229 running in system mode. 
(+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP 
+LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ -LZ4 +SECCOMP +BLKID +ELFUTILS 
+KMOD -IDN)
     [   49.203686] systemd[1]: Detected virtualization xen.
     [   49.208639] systemd[1]: Detected architecture arm64.

     Welcome to Ubuntu 16.04 LTS!

     [   49.225550] systemd[1]: Set hostname to <ubuntu>.
     [   49.240771] random: systemd: uninitialized urandom read (16 
bytes read)
     [   49.261399] usb 4-1: new SuperSpeed Gen 1 USB device number 2 
using xhci_hcd
     [   49.294171] systemd[1]: Reached target User and Group Name Lookups.
     [   49.297272] usb 1-1.1: new full-speed USB device number 3 using 
ehci-pci
     [  OK  ] Reached target User and Group Name Lookups.
     [   49.321832] hub 4-1:1.0: USB hub found
     [   49.326718] hub 4-1:1.0: 4 ports detected
     [   49.326988] systemd[1]: Created slice User and Session Slice.
     [  OK  ] Created slice User and Session Slice.
     [   49.349298] systemd[1]: Reached target Encrypted Volumes.
     [  OK  ] Reached target Encrypted Volumes.
     [   49.369334] systemd[1]: Listening on Journal Audit Socket.
     [  OK  ] Listening on Journal Audit Socket.
     [   49.389280] systemd[1]: Listening on LVM2 metadata daemon socket.
     [  OK  ] Listening on LVM2 metadata daemon socket.
     [   49.409288] systemd[1]: Listening on udev Kernel Socket.
     [  OK  ] Listening on udev Kernel Socket.
     [  OK  ] Listening on Syslog Socket.
     [  OK  ] Listening on LVM2 poll daemon socket.
     [  OK  ] Started Forward Password Requests to Wall Directory Watch.
     [  OK  ] Created slice System Slice.
     [   49.493760] input: Keyboard/Mouse KVM 1.1.0 as 
/devices/pci0000:7a/0000:7a:01.0/usb1/1-1/1-1.1/1-1.1:1.0/0003:12D1:0003.0001/input/input1
     [  OK  ] Created slice system-serial\x2dgetty.slice.
     [  OK  ] Reached target Slices.
     [  OK  ] Created slice system-getty.slice.
     [  OK  ] Listening on Journal Socket (/dev/log).
     [  OK     49.565357] hid-generic 0003:12D1:0003.0001: input: USB 
HID v1.10 Keyboard [Keyboard/Mouse KVM 1.1.0] on usb-0000:7a:01.0-1.1/input0
     0m] Listening on Journal Socket.
     [   49.588767] input: Keyboard/Mouse KVM 1.1.0 as 
/devices/pci0000:7a/0000:7a:01.0/usb1/1-1/1-1.1/1-1.1:1.1/0003:12D1:0003.0002/input/input2
     [   49.601114] hid-generic 0003:12D1:0003.0002: input: USB HID 
v1.10 Mouse [Keyboard/Mouse KVM 1.1.0] on usb-0000:7a:01.0-1.1/input1
              Mounting Huge Pages File System...
              Starting Create Static Device Nodes in /dev...
              Starting Journal Service...
              Starting Remount Root and Kernel File Systems...
              Starting Load Kernel Modules...
              Mounting Debug File System...
     [  OK  ] Reached target Swap.
              Starting Uncomplicated firewall...
     [  OK  ] Listening on udev Control Socket.
              Starting Nameserver information manager...
              Mounting POSIX Message Queue File System...
     [  OK  ] Listening on /dev/initctl Compatibility Named Pipe.
     [  OK  ] Listening on Device-mapper event daemon FIFOs.
              Starting Monitoring of LVM2 mirrors... dmeventd or 
progress polling...
     [  OK  ] Mounted POSIX Message Queue File System.
     [  OK  ] Mounted Debug File System.
     [  OK  ] Mounted Huge Pages File System.
     [  OK  ] Started Journal Service.
     [  OK  ] Started Create Static Device Nodes in /dev.
     [  OK  ] Started Remount Root and Kernel File Systems.
     [FAILED] Failed to start Load Kernel Modules.
     See 'systemctl status systemd-modules-load.service' for details.
     [  OK  ] Started Uncomplicated firewall.
     [  OK  ] Started Nameserver information manager.
     [  OK  ] Started LVM2 metadata daemon.
              Mounting Configuration File System...
              Starting Apply Kernel Variables...
              Starting udev Coldplug all Devices...
              Starting Load/Save Random Seed...
              Starting udev Kernel Device Manager...
              Starting Flush Journal to Persistent Storage...
     [  OK  ] Mounted Configuration File System.
     [  OK  ] Started udev Kernel Device Manager.
     [  OK  ] Started Apply Kernel Variables.
     [  OK  ] Started Load/Save Random Seed.
     [FAILED] Failed to start Flush Journal to Persistent Storage.
     See 'systemctl status systemd-journal-flush.service' for details.
     [  OK  ] Started Monitoring of LVM2 mirrors,...ng dmeventd or 
progress polling.
     [  OK  ] Reached target Local File Systems (Pre).
     [  OK  ] Reached target Local File Systems.
              Starting Create Volatile Files and Directories...
              Starting Set console keymap...
              Starting Tell Plymouth To Write Out Runtime Data...
              Starting LSB: AppArmor initialization...
              Starting LSB: ebtables ruleset management...
     [  OK  ] Started Create Volatile Files and Directories.
     [FAILED] Failed to start Set console keymap.
     See 'systemctl status console-setup.service' for details.
     [  OK  ] Started Tell Plymouth To Write Out Runtime Data.
     [  OK  ] Started LSB: AppArmor initialization.
     [  OK  ] Started LSB: ebtables ruleset management.
     [  107.583936] rcu: INFO: rcu_preempt self-detected stall on CPU
     [  107.600625] rcu:     15-....: (1 GPs behind) 
idle=b66/1/0x4000000000000002 softirq=7215/9103 fqs=1076
              Starting Raise network interfaces...
              Starting Update UTMP about System Boot/Shutdown...
              Starting Network Time Synchronization...
     [  OK  ] Started Network Time Synchronization.
     [  OK  ] Reached target System Time Synchronized.
     [  OK  ] Started Update UTMP about System Boot/Shutdown.
     [  OK  ] Found device /dev/ttyS0.
     [ TIME ] Timed out waiting for device dev-hvc0.device.
     [DEPEND] Dependency failed for Serial Getty on hvc0.
     [  OK  ] Started udev Coldplug all Devices.
     [  OK  ] Started Dispatch Password Requests to Console Directory Watch.
     [  OK  ] Reached target System Initialization.
     [  OK  ] Started Daily Cleanup of Temporary Directories.
     [  170.604621] rcu: INFO: rcu_preempt self-detected stall on CPU
     [  170.623563] rcu:     10-....: (1 GPs behind) 
idle=50e/1/0x4000000000000002 softirq=6716/13779 fqs=3370
              Starting LXD - unix socket.
     [  OK  ] Listening on Virtual machine log manager socket.
     [  OK  ] Started ACPI Events Check.
     [  OK  ] Started Timer to automatically refresh installed snaps.
     [  OK  ] Listening on UUID daemon activation socket.
     [  OK  ] Started Daily apt activities.
     [  OK  ] Reached target Timers.
              Starting Socket activation for snappy daemon.
     [  OK  ] Listening on Virtual machine lock manager socket.
     [  OK  ] Listening on D-Bus System Message Bus Socket.
     [  OK  ] Listening on ACPID Listen Socket.
     [  OK  ] Started Trigger resolvconf update for networkd DNS.
     [  OK  ] Reached target Paths.
     [  OK  ] Listening on LXD - unix socket.
     [  OK  ] Listening on Socket activation for snappy daemon.
     [  OK  ] Reached target Sockets.
     [  OK  ] Reached target Basic System.
     [  OK  ] Started Cgroup management daemon.
     [  OK  ] Started Regular background program processing daemon.
              Starting Login Service...
              Starting Accounts Service...
     [  OK  ] Started FUSE filesystem for LXC.
              Starting LSB: MD monitoring daemon...
              Starting System Logging Service...
     [  OK  ] Started Deferred execution scheduler.
     [  OK  ] Started D-Bus System Message Bus.
     [  OK  ] Started ACPI event daemon.
     [  OK  ] Started Snappy daemon.
              Starting LXD - container startup/shutdown...
     [  OK  ] Started System Logging Service.
     [  OK  ] Started LSB: MD monitoring daemon.
     [  OK  ] Started LXD - container startup/shutdown.
     [  OK  ] Started Login Service.
              Starting Authenticate and Authorize Users to Run 
Privileged Tasks...
     [  OK  ] Started Authenticate and Authorize Users to Run Privileged 
Tasks.
     [  OK  ] Started Accounts Service.
     [  OK  ] Stopped FUSE filesystem for LXC.
     [  OK  ] Started FUSE filesystem for LXC.
     [FAILED] Failed to start Raise network interfaces.
     See 'systemctl status networking.service' for details.
     [  OK  ] Reached target Network.
     [  OK  ] Reached target Network is Online.
              Starting /etc/rc.local Compatibility...
              Starting Seed the pseudo random number generator on first 
boot...
              Starting LXC network bridge setup...
              Starting iSCSI initiator daemon (iscsid)...
     [FAILED] Failed to start Seed the pseudo random number generator on 
first boot.
     See 'systemctl status pollinate.service' for details.
     [FAILED] Failed to start LXC network bridge setup.
     See 'systemctl status lxc-net.service' for details.
     [FAILED] Failed to start iSCSI initiator daemon (iscsid).
     See 'systemctl status iscsid.service' for details.
              Starting Login to default iSCSI targets...
     [  OK  ] Stopped FUSE filesystem for LXC.
     [  OK  ] Started FUSE filesystem for LXC.
              Starting LXC Container Initialization and Autoboot Code...
              Starting OpenBSD Secure Shell server...
     [  OK  ] Started OpenBSD Secure Shell server.
     [FAILED] Failed to start Login to default iSCSI targets.
     See 'systemctl status open-iscsi.service' for details.
     [  OK  ] Reached target Remote File Systems (Pre).
     [  OK  ] Reached target Remote File Systems.
              Starting LSB: Set the CPU Frequency Scaling governor to 
"ondemand"...
              Starting Virtualization daemon...
              Starting Permit User Sessions...
              Starting LSB: automatic crash report generation...
              Starting LSB: daemon to balance interrupts for SMP systems...
     [  OK  ] Started Permit User Sessions.
     [  OK  ] Stopped FUSE filesystem for LXC.
     [  OK  ] Started FUSE filesystem for LXC.
     [  OK  ] Started Virtualization daemon.
     [  OK  ] Started LSB: Set the CPU Frequency Scaling governor to 
"ondemand".
     [  OK  ] Started LSB: automatic crash report generation.
     [  OK  ] Started LSB: daemon to balance interrupts for SMP systems.
              Starting Suspend Active Libvirt Guests...
     [  OK  ] Started Suspend Active Libvirt Guests.
     [  OK  ] Stopped FUSE filesystem for LXC.
     [  OK  ] Started FUSE filesystem for LXC.
     [  OK  ] Stopped FUSE filesystem for LXC.
     [FAILED] Failed to start FUSE filesystem for LXC.
     See 'systemctl status lxcfs.service' for details.
     [  OK  ] Started /etc/rc.local Compatibility.
              Starting Terminate Plymouth Boot Screen...
              Starting Hold until boot process finishes up...
     [  OK  ] Started Terminate Plymouth Boot Screen.
     [  OK  ] Started Hold until boot process finishes up.
     [  OK  ] Started Getty on tty1.
     [  OK  ] Started Serial Getty on ttyS0.
     [  OK  ] Reached target Login Prompts.
     (XEN) d0v2: vGICD: unhandled read r0 offset 0x00033c
     (XEN) traps.c:1973:d0v2 HSR=0x93800006 pc=0xffff80001046e470 
gva=0xffff800011d8033c gpa=0x000000ae00033c
     [  228.455557] Unhandled fault at 0xffff800011d8033c
     [  228.460283] Mem abort info:
     [  228.463064]   ESR = 0x96000000
     [  228.466105]   EC = 0x25: DABT (current EL), IL = 32 bits
     [  228.471390]   SET = 0, FnV = 0
     [  228.474430]   EA = 0, S1PTW = 0
     [  228.477556] Data abort info:
     [  228.480423]   ISV = 0, ISS = 0x00000000
     [  228.484240]   CM = 0, WnR = 0
     [  228.487193] swapper pgtable: 4k pages, 48-bit VAs, 
pgdp=0000000009281000
     [  228.493863] [ffff800011d8033c] pgd=000020261ffff003, 
pud=000020261fffe003, pmd=000000007db64003, pte=00680000ae000707
     [  228.504425] Internal error: ttbr address size fault: 96000000 
[#1] PREEMPT SMP
     [  228.511614] Modules linked in:
     [  228.514656] CPU: 2 PID: 2237 Comm: (agetty) Tainted: G W         
5.5.0-rc5 #132
     [  228.522535] pstate: a0400085 (NzCv daIf +PAN -UAO)
     [  228.527309] pc : gic_peek_irq+0x68/0xac
     [  228.531127] lr : gic_peek_irq+0x24/0xac
     [  228.534944] sp : ffff80001d36ba60
     [  228.538244] x29: ffff80001d36ba60 x28: ffff000067b86a70
     [  228.543530] x27: 0000000000000000 x26: 0000000000000000
     [  228.548819] x25: 0000000000000000 x24: 0000000000000000
     [  228.554106] x23: ffff8000117a9000 x22: ffff202619052658
     [  228.559393] x21: 0000000000000001 x20: ffff202619052658
     [  228.564681] x19: ffff8000117a9000 x18: 0000000000000000
     [  228.569968] x17: 0000000000000000 x16: 0000000000000000
     [  228.575254] x15: 0000000000000000 x14: 0000000000000000
     [  228.580541] x13: 0000000000000000 x12: 0000000000000000
     [  228.585828] x11: 0000000000000000 x10: 0000000000000040
     [  228.591115] x9 : ffff8000117c1af8 x8 : ffff00007d400e20
     [  228.596401] x7 : 0000000000000000 x6 : 0000000000000000
     [  228.601687] x5 : ffff00007d400db0 x4 : ffff202619052658
     [  228.606973] x3 : 0000000000000010 x2 : ffff800011d80000
     [  228.612259] x1 : 000000000000003c x0 : ffff800011d8033c
     [  228.617545] Call trace:
     [  228.619981]  gic_peek_irq+0x68/0xac
     [  228.623455]  gic_irq_get_irqchip_state+0x60/0x94
     [  228.628051]  __irq_get_irqchip_state+0x2c/0x4c
     [  228.632474]  __synchronize_hardirq+0xb0/0xb8
     [  228.636725]  synchronize_irq+0x30/0x9c
     [  228.640458]  serial8250_do_shutdown+0x50/0x130
     [  228.644881]  serial8250_shutdown+0x20/0x28
     [  228.648959]  uart_port_shutdown+0x3c/0x50
     [  228.652951]  uart_shutdown+0x16c/0x1c0
     [  228.656683]  uart_hangup+0x6c/0x12c
     [  228.660159]  __tty_hangup+0x314/0x324
     [  228.663804]  tty_ioctl+0x7a0/0xd2c
     [  228.667192]  do_vfs_ioctl+0xbc/0xb24
     [  228.670751]  ksys_ioctl+0x78/0xa8
     [  228.674051]  __arm64_sys_ioctl+0x1c/0x28
     [  228.677957]  el0_svc_common.constprop.2+0xb0/0x160
     [  228.682727]  el0_svc_handler+0x20/0x7c
     [  228.686459]  el0_sync_handler+0xf4/0x130
     [  228.690362]  el0_sync+0x140/0x180
     [  228.693663] Code: 53057c21 d37e6821 8b204020 8b000040 (b9400000)
     [  228.699729] ---[ end trace f68728a0d3053bd3 ]---
     [  228.708420] Unable to handle kernel paging request at virtual 
address ffff80001004501c
     [  228.716299] Mem abort info:
     [  228.719078]   ESR = 0x96000021
     [  228.722120]   EC = 0x25: DABT (current EL), IL = 32 bits
     [  228.727405]   SET = 0, FnV = 0
     [  228.730446]   EA = 0, S1PTW = 0
     [  228.733573] Data abort info:
     [  228.736440]   ISV = 0, ISS = 0x00000021
     [  228.740257]   CM = 0, WnR = 0
     [  228.743210] swapper pgtable: 4k pages, 48-bit VAs, 
pgdp=0000000009281000
     [  228.749881] [ffff80001004501c] pgd=000020261ffff003, 
pud=000020261fffe003, pmd=000020261fffd003, pte=0068000039d40703
     [  249.449305] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
     [  249.455375] rcu:     2-...0: (0 ticks this GP) 
idle=9aa/1/0x4000000000000000 softirq=18186/18186 fqs=2626
     [  249.464730]  (detected by 1, t=5254 jiffies, g=2537, q=9163)
     [  249.470362] Task dump for CPU 2:
     [  249.473575] (agetty)        R  running task        0 2237      1 
0x00000022
     [  249.480591] Call trace:
     [  249.483031]  __switch_to+0xbc/0x1f4
     [  249.486504]  0xb940000000000000
     [  284.761745] random: crng init done
     [  284.765141] random: 7 urandom warning(s) missed due to ratelimiting
Wei Xu Jan. 7, 2020, 12:55 p.m. UTC | #13
Hi Julien,

On 2020/1/7 19:42, Julien Grall wrote:
> Hi,
>
> On 07/01/2020 09:48, Wei Xu wrote:
>> On 2020/1/7 17:10, Julien Grall wrote:
>>>
>>>
>>> On 07/01/2020 08:39, Wei Xu wrote:
>>>> Hi Stefano,
>>>>
>>>> On 2020/1/7 6:01, Stefano Stabellini wrote:
>>>>> On Sat, 28 Dec 2019, Wei Xu wrote:
>>>>>> Hi Julien,
>>>>>>
>>>>>> On 2019/12/28 16:09, Julien Grall wrote:
>>>>>>> Hi,
>>>>>>>
>>>>>>> On 28/12/2019 03:08, Wei Xu wrote:
>>>>>>>> This patch fixes the typo about the active status range of an IRQ
>>>>>>>> via GICD. Otherwise it will be failed to handle the mmio access 
>>>>>>>> and
>>>>>>>> inject a data abort.
>>>>>>> I have seen a patch similar from NXP a month ago and I disagreed 
>>>>>>> on the
>>>>>>> approach.
>>>>>>>
>>>>>>> If you look at the context you modifed, it says that reading 
>>>>>>> ACTIVER is not
>>>>>>> supported. While I agree the behavior is not consistent accross 
>>>>>>> ACTIVER,
>>>>>>> injecting a data abort is a perfectly fine behavior to me 
>>>>>>> (though not spec
>>>>>>> compliant) as we don't implement the registers correctly.
>>>>>>>
>>>>>>> I guess you are sending this patch, because you tried Linux 5.4 
>>>>>>> (or later)
>>>>>>> on Xen, right? Linux has recently began to read ACTIVER to check 
>>>>>>> whether an
>>>>>>> IRQ is active at the HW level during the synchronizing of the 
>>>>>>> IRQS. From my
>>>>>>> understanding, this is used because there is a window where the 
>>>>>>> interrupt is
>>>>>>> active at the HW level but the Linux IRQ subsystem is not aware 
>>>>>>> of it.
>>>>>>>
>>>>>>> While the patch below will allow Linux 5.4 to not crash, it is 
>>>>>>> not going to
>>>>>>> make it fly very far because of the above. So I am rather not 
>>>>>>> happy with
>>>>>>> persuing with returning 0.
>>>>>>>
>>>>>> Yes, I am using Linux 5.5-rc2 :)
>>>>>> Got it and thanks for the explanation.
>>>>>> I am not insistent on this and OK to wait for the update.
>>>>>> Thanks and have a very happy new year!
>>>>> Hi Wei,
>>>>>
>>>>> what do you do to reproduce the issue? Are you just booting Linux
>>>>> 5.5-rc2 as dom0 and seeing the issue during boot, or are you doing
>>>>> something specific?
>>>>>
>>>>> .
>>>>>
>>>>
>>>> I directly tested the mainline kernel with defconfig.
>>>> And the 5.5-rc5 kernel booting log is as below:
>>>>
>>>>      root@ubuntu:~# dmesg | more
>>>>      [    0.000000] Booting Linux on physical CPU 0x0000000000 
>>>> [0x481fd010]
>>>>      [    0.000000] Linux version 5.5.0-rc5 (joyx@Turing-Arch-b) 
>>>> (gcc version 4.9.1 2
>>>>      0140505 (prerelease) (crosstool-NG linaro-1.13.1-4.9-2014.05 - 
>>>> Linaro GCC 4.9-20
>>>>      14.05)) #132 SMP PREEMPT Tue Jan 7 15:43:06 CST 2020
>>>>      [    0.000000] Xen XEN_VERSION.XEN_SUBVERSION support found
>>>>      [    0.000000] efi: Getting EFI parameters from FDT:
>>>>      [    0.000000] efi: EFI v2.50 by Xen
>>>>      [    0.000000] efi:  ACPI 2.0=0x181d0e70
>>>>      [    0.000000] cma: Reserved 32 MiB at 0x000000007e000000
>>>>      [    0.000000] ACPI: Early table checksum verification disabled
>>>>      [    0.000000] ACPI: RSDP 0x00000000181D0E70 000024 (v02 HISI  )
>>>>      [    0.000000] ACPI: XSDT 0x00000000181D0DB0 0000BC (v01 HISI 
>>>> HIP08    0000000
>>>>      0      01000013)
>>>
>>> Is that the full log from Linux? If not, can you post it in full?
>>>
>>>>
>>>> But to boot with ACPI on our hardware, except above change I have 
>>>> also done some hacking based on
>>>> XEN 4.13 as below:
>>>
>>> I haven't booted Xen on any ACPI systems recently so there might be 
>>> bugs in the code. Your changes below is definitely a call to look 
>>> more into details what's wrong.
>>>
>>
>> Yes, my target is to make Xen booting with ACPI firstly.
>>
>>>>
>>>>      diff --git a/xen/arch/arm/traps.c b/xen/arch/arm/traps.c
>>>>      index d028ec9..215a291 100644
>>>>      --- a/xen/arch/arm/traps.c
>>>>      +++ b/xen/arch/arm/traps.c
>>>>      @@ -1856,8 +1856,8 @@ static bool try_map_mmio(gfn_t gfn)
>>>>               return false;
>>>>
>>>>           /* The hardware domain can only map permitted MMIO 
>>>> regions */
>>>>      -    if ( !iomem_access_permitted(d, mfn_x(mfn), mfn_x(mfn) + 
>>>> 1) )
>>>>      -        return false;
>>>>      +    /* if ( !iomem_access_permitted(d, mfn_x(mfn), mfn_x(mfn) 
>>>> + 1) ) */
>>>>      +    /*     return false; */
>>>
>>> Dom0 should be able to map nearly all the address space through this 
>>> function. The only thing not allowed is the GIC and UART (see 
>>> acpi_iomem_deny_access).
>>>
>>> So why do you want this change? What sort of address Dom0 is trying 
>>> to map and fail?
>>
>> Yes, it is the UART address 0x3f00002f8.
>> Without this, during DOM0 UART initialization, the mem_serial_in in 
>> the kernel side will be failed and reported a unhandled fault at 
>> 0xffff80001006d2f9(gva)
>> because of mem abort.
>> The Xen printed "HSR=0x930100005 pc=0xffff800010645d94 
>> gva=0xffff80001006d2f9 gpa=0x000003f00002f9" in traps.c.
>
> I assume this is your primary address as specified in the SPCR, right?
>
Yes.

> As only one entity should manage the UART (i.e Xen or Dom0), we today 
> assume this will be managed by Xen. Xen should expose a partial 
> virtual UART (only a few registers are emulating) to dom0 in replacement.
>
> This is usually done by the UART driver. Looking at the log you pasted 
> in a separate e-mail:
>
> (XEN) Platform: Generic System
> (XEN) Unable to initialize acpi uart: -9
> (XEN) Bad console= option 'dtuart'
>
> So Xen didn't manage to initialize the uart. The -9 suggests, Xen 
> didn't find a driver for your UART. At the moment, Xen is only able to 
> detect pl011, sbsa, sbsa32 UART for ACPI. What is the type of the UART 
> used on your platform?
>

Thanks!
Got it.
Our UART is 8250.

>>
>>>
>>>>
>>>>           return !map_regions_p2mt(d, gfn, 1, mfn, p2m_mmio_direct_c);
>>>>       }
>>>>
>>>>
>>>>      diff --git a/xen/arch/arm/mm.c b/xen/arch/arm/mm.c
>>>>      index 4d6c971..c626f9e 100644
>>>>      --- a/xen/arch/arm/mm.c
>>>>      +++ b/xen/arch/arm/mm.c
>>>>      @@ -1095,7 +1095,7 @@ static bool xen_pt_check_entry(lpae_t 
>>>> entry, mfn_t mfn, unsigned int flags)
>>>>               {
>>>>                   mm_printk("Changing MFN for a valid entry is not 
>>>> allowed (%#"PRI_mfn" -> %#"PRI_mfn").\n",
>>>>                             mfn_x(lpae_get_mfn(entry)), mfn_x(mfn));
>>>>      -            return false;
>>>>      +            return true;
>>>
>>> There is a pretty good reason to prevent modifying the MFN on a 
>>> valid entry. Indeed, the PT code is not handling of the 
>>> Break-Before-Make sequence (requires when updating certain entry) as 
>>> this is a can of worms.
>>>
>>> However, during my testing I never found a place where an valid 
>>> entry is modified (other than the permissions part). So can you give 
>>> more details how you came up here?
>>
>> In the full log, I found the RSDP(0x39de0) replaced by XSDT(0x39dd0).
>> But I did not know why :(
>
> On Arm, we requires the fixmap to be empty (by calling clear_fixmap()) 
> before the fixmap can used for a different mapping.
>
> Looking at the implementation of acpi_os_unmap_memory(), the fixmap is 
> not cleared and hence why you see the warning about changing the MFN 
> on valid entry.
>
> IHMO, acpi_os_unmap_memory() ought to clear the fixmap. This will make 
> it a much saner interface to use. Would you mind to have a look?
>

I will try to look it.

>>
>>>
>>>>               }
>>>>           }
>>>>           /* Sanity check when removing a page. */
>>>>
>>>>
>>>>      diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
>>>>      index 3c899cd..1e83351 100644
>>>>      --- a/xen/arch/arm/setup.c
>>>>      +++ b/xen/arch/arm/setup.c
>>>>      @@ -852,7 +852,8 @@ void __init start_xen(unsigned long 
>>>> boot_phys_offset,
>>>>           else
>>>>           {
>>>>               printk("Booting using ACPI\n");
>>>>      -        device_tree_flattened = NULL;
>>>>      +        device_tree_flattened = relocate_fdt(fdt_paddr, 
>>>> fdt_size);
>>>>      +        dt_unflatten_host_device_tree();
>>>
>>> When using ACPI, the DT should not be used. So why do you need this?
>>
>> I have tried not passing DT with grub-2.04 but also to load DOM0 kernel.
>> The log is as below:
>>
>>      (XEN) *** LOADING DOMAIN 0 ***
>>      (XEN) Loading d0 kernel from boot module @ 0000000016221000
>>      (XEN) Allocating 1:1 mappings totalling 4096MB for dom0:
>>      (XEN) BANK[0] 0x00000008000000-0x00000010000000 (128MB)
>>      (XEN) BANK[1] 0x00000020000000-0x00000038000000 (384MB)
>>      (XEN) BANK[2] 0x00000050000000-0x00000080000000 (768MB)
>>      (XEN) BANK[3] 0x00202000000000-0x00202080000000 (2048MB)
>>      (XEN) BANK[4] 0x002020b0000000-0x002020c0000000 (256MB)
>>      (XEN) BANK[5] 0x00202600000000-0x00202620000000 (512MB)
>>      (XEN) Grant table range: 0x000000181da000-0x0000001821a000
>>      (XEN) Allocating PPI 16 for event channel interrupt
>>      (XEN) Loading zImage from 0000000016221000 to 
>> 0000000008080000-00000000099caa00
>>      (XEN) Loading d0 DTB to 0x000000000fe00000-0x000000000fe0025b
>>      (XEN) Initial low memory virq threshold set at 0x4000 pages.
>>      (XEN) Scrubbing Free RAM in background
>>      (XEN) Std. Loglevel: All
>>      (XEN) Guest Loglevel: All
>>      (XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to 
>> switch input)
>>      (XEN) Data Abort Trap. Syndrome=0x6
>>      (XEN) Walking Hypervisor VA 0x38 on CPU0 via TTBR 
>> 0x000000001831a000
>>      (XEN) 0TH[0x0] = 0x000000001831df7f
>>      (XEN) 1ST[0x0] = 0x000000001831bf7f
>>      (XEN) 2ND[0x0] = 0x0000000000000000
>>      (XEN) CPU0: Unexpected Trap: Data Abort
>>      (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
>>      (XEN) CPU:    0
>>      (XEN) PC:     00000000002c6398 create_domUs+0x20/0x208
>>      (XEN) LR:     00000000002c6398
>>      (XEN) SP:     0000000000307d60
>>      (XEN) CPSR:   60000249 MODE:64-bit EL2h (Hypervisor, handler)
>>      (XEN)      X0: 0000000000000000  X1: 0000000000000003  X2: 
>> 0000000000000000
>>      (XEN)      X3: 0000000000000000  X4: 0000000000000000  X5: 
>> 0000000000000024
>>      (XEN)      X6: 0080808080808080  X7: fefefefefefeff09  X8: 
>> 7f7f7f7f7f7f7f7f
>>      (XEN)      X9: 731f646b61606d54 X10: 7f7f7f7f7f7f7f7f X11: 
>> 0101010101010101
>>      (XEN)     X12: 0000000000000008 X13: 00000000002871b8 X14: 
>> 0000000000000020
>>      (XEN)     X15: 00000000004002f8 X16: 00000000002b2000 X17: 
>> 00000000002b2000
>>      (XEN)     X18: 00000000002b2000 X19: 000080662f3d7000 X20: 
>> 00000000002b1480
>>      (XEN)     X21: 0000000000348430 X22: 0000000000000080 X23: 
>> 00000000002a4240
>>      (XEN)     X24: 0000000000000080 X25: 0000000000348000 X26: 
>> 00000000002e9078
>>      (XEN)     X27: 000020279c000000 X28: 00000000002e83f0  FP: 
>> 0000000000307d60
>>      (XEN)
>>      (XEN)   VTCR_EL2: 800d3590
>>      (XEN)  VTTBR_EL2: 0000000000000000
>>      (XEN)
>>      (XEN)  SCTLR_EL2: 30cd183d
>>      (XEN)    HCR_EL2: 000000008000003a
>>      (XEN)  TTBR0_EL2: 000000001831a000
>>      (XEN)
>>      (XEN)    ESR_EL2: 96000006
>>      (XEN)  HPFAR_EL2: 0000000000000000
>>      (XEN)    FAR_EL2: 0000000000000038
>>      (XEN)
>>      (XEN) Xen stack trace from sp=0000000000307d60:
>>      (XEN)    0000000000307de0 00000000002cb5f0 000080662f3d7000 
>> 00000000002b1480
>>      (XEN)    0000000000348430 0000000000000080 00000000002a4240 
>> 0000000000000080
>>      (XEN)    0000000080000000 6d681f6762736876 0000000000307dc0 
>> 00000000002bc570
>>      (XEN)    0000000000307de0 00000000002cb5e0 000080662f3d7000 
>> 00000000002b1480
>>      (XEN)    000000003f14a780 00000000002001b8 00000000181da000 
>> 0000000017fda000
>>      (XEN)    000000001a637000 0000000000000000 00000000004002f8 
>> 000000001828cdc8
>>      (XEN)    0000000000001500 0000000000000001 0000000000000001 
>> 000000001828cdc0
>>      (XEN)    0000000000000000 0000000000003000 000000001a637000 
>> 0000003700000000
>>      (XEN)    0000000000000000 0000000f86db1000 0000000000000000 
>> 0000000000000000
>>      (XEN)    0000000000000000 0000000300000000 0000008000000000 
>> 00000040ffffffff
>>      (XEN)    00000002ffffffff 0000000000000280 0000000000000000 
>> 0000000000000000
>>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
>> 0000000000000000
>>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
>> 0000000000000000
>>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
>> 0000000000000000
>>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
>> 0000000000000000
>>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
>> 0000000000000000
>>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
>> 0000000000000000
>>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
>> 0000000000000000
>>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
>> 0000000000000000
>>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
>> 0000000000000000
>>      (XEN)    0000000000000000 0000000000000000 0000000000000000 
>> 0000000000000000
>>      (XEN) Xen call trace:
>>      (XEN)    [<00000000002c6398>] create_domUs+0x20/0x208 (PC)
>>      (XEN)    [<00000000002c6398>] create_domUs+0x20/0x208 (LR)
>>      (XEN)    [<00000000002cb5f0>] start_xen+0xc34/0xcbc
>>      (XEN)    [<00000000002001b8>] 
>> arm64/head.o#primary_switched+0x10/0x30
>>      (XEN)
>>      (XEN) debugtrace_dump() global buffer starting
>>      1 cpupool_add_domain(dom=0,pool=0) n_dom 1 rc 0
>>      (XEN) wrap: 0
>>      (XEN) debugtrace_dump() global buffer finished
>>      (XEN)
>>      (XEN) ****************************************
>>      (XEN) Panic on CPU 0:
>>      (XEN) CPU0: Unexpected Trap: Data Abort
>>      (XEN) ****************************************
>>      (XEN)
>>      (XEN) Reboot in five seconds...
>>
>>
>> So I passed DT to the Xen with grub-2.02 and hacked above code 
>> because in the create_domUs
>> will report a bug if chosen node  can not be find.
>
> The function is used for creating multiple domains at boot time from 
> Xen. It is very DT centric at the moment, but ACPI platform may not 
> come with a DT (though the EFI stub may create one ATM). I can see 
> other issue with dom0less and ACPI, so I think it would be best to 
> just not call the function when using ACPI. Could you try following 
> patch (not tested nor compiled):
>
> diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
> index 3c899cd4a0..3e9dc8fe9f 100644
> --- a/xen/arch/arm/setup.c
> +++ b/xen/arch/arm/setup.c
> @@ -985,7 +985,8 @@ void __init start_xen(unsigned long boot_phys_offset,
>
>      system_state = SYS_STATE_active;
>
> -    create_domUs();
> +    if ( !acpi_disabled )
> +        create_domUs();
>
>      domain_unpause_by_systemcontroller(dom0);
>
> Cheers,
>


Thanks!
It is not working even I changed the condition to " if ( acpi_disabled ) ".
My grub 2.04 configuration is as below:

     xen_hypervisor /xen dom0_mem=4G acpi=force loglvl=all guest_loglvl=all
     xen_module /Image rdinit=/init  acpi=force noinitrd root=/dev/sdb1 rw

The log with the condition " if ( acpi_disabled ) " is as following:

     (XEN) Adding cpu 126 to runqueue 0
     (XEN) Adding cpu 127 to runqueue 0
     (XEN) alternatives: Patching with alt table 00000000002d4f48 -> 
00000000002d5764
     (XEN) *** LOADING DOMAIN 0 ***
     (XEN) Loading d0 kernel from boot module @ 0000000016257000
     (XEN) Allocating 1:1 mappings totalling 4096MB for dom0:
     (XEN) BANK[0] 0x00000008000000-0x00000010000000 (128MB)
     (XEN) BANK[1] 0x00000020000000-0x00000038000000 (384MB)
     (XEN) BANK[2] 0x00000050000000-0x00000080000000 (768MB)
     (XEN) BANK[3] 0x00202000000000-0x00202080000000 (2048MB)
     (XEN) BANK[4] 0x002020b0000000-0x002020c0000000 (256MB)
     (XEN) BANK[5] 0x00202600000000-0x00202620000000 (512MB)
     (XEN) Grant table range: 0x000000181c7000-0x00000018207000
     (XEN) Allocating PPI 16 for event channel interrupt
     (XEN) Loading zImage from 0000000016257000 to 
0000000008080000-0000000009981200
     (XEN) Loading d0 DTB to 0x000000000fe00000-0x000000000fe0025b
     (XEN) Initial low memory virq threshold set at 0x4000 pages.
     (XEN) Scrubbing Free RAM in background
     (XEN) Std. Loglevel: All
     (XEN) Guest Loglevel: All
     (XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch 
input)
     (XEN) Data Abort Trap. Syndrome=0x6
     (XEN) Walking Hypervisor VA 0x10 on CPU0 via TTBR 0x00000000182ff000
     (XEN) 0TH[0x0] = 0x0000000018302f7f
     (XEN) 1ST[0x0] = 0x0000000018300f7f
     (XEN) 2ND[0x0] = 0x0000000000000000
     (XEN) CPU0: Unexpected Trap: Data Abort
     (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
     (XEN) CPU:    0
     (XEN) PC:     00000000002b65c8 00000000002b65c8
     (XEN) LR:     00000000002c8e94
     (XEN) SP:     000080662ffcfe00
     (XEN) CPSR:   60000249 MODE:64-bit EL2h (Hypervisor, handler)
     (XEN)      X0: 0000000000000000  X1: 000000001a627000  X2: 
000000000021e548
     (XEN)      X3: 0000000000000000  X4: 00000000002af508  X5: 
0000000000000000
     (XEN)      X6: 000080662ffd0000  X7: 0000000000000000  X8: 
0000000000000000
     (XEN)      X9: 0000000000000000 X10: 0000000000000000 X11: 
0000000000000000
     (XEN)     X12: 0000000000000000 X13: 0000000000000000 X14: 
0000000000000000
     (XEN)     X15: 00000000004002f8 X16: 00000000002b1000 X17: 
00000000002b1000
     (XEN)     X18: 00000000002b1000 X19: 0000000000000000 X20: 
000000001a624000
     (XEN)     X21: 000000001a627000 X22: 000000000021e548 X23: 
00000000002b15c0
     (XEN)     X24: 00000000002b1000 X25: 000000000021e548 X26: 
00000000002e1078
     (XEN)     X27: 000020279c000000 X28: 00000000002e0410  FP: 
000080662ffcfe00
     (XEN)
     (XEN)   VTCR_EL2: 800d3590
     (XEN)  VTTBR_EL2: 0000000000000000
     (XEN)
     (XEN)  SCTLR_EL2: 30cd183d
     (XEN)    HCR_EL2: 000000008000003a
     (XEN)  TTBR0_EL2: 00000000182ff000
     (XEN)
     (XEN)    ESR_EL2: 96000006
     (XEN)  HPFAR_EL2: 0000000000000000
     (XEN)    FAR_EL2: 0000000000000010
     (XEN)
     (XEN) Xen stack trace from sp=000080662ffcfe00:
     (XEN)    000080662ffcfe50 00000000002c95c0 00000000002e0078 
0000000000000001
     (XEN)    000000001a627000 000000001a624000 00000000002b15c0 
00000000002b1000
     (XEN)    0000000000000240 0000000000000000 000080662ffcfea0 
0000000000266f60
     (XEN)    00000000002b0000 00000000002b0480 0000000000340430 
0000000000000080
     (XEN)    00000000002a2c50 0000000000000080 0000000000340000 
0000000000266f5c
     (XEN)    00000000002ffde0 00000000002ca260 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN)    0000000000000000 0000000000000000 0000000000000000 
0000000000000000
     (XEN) Xen call trace:
     (XEN)    [<00000000002b65c8>] 00000000002b65c8 (PC)
     (XEN)    [<00000000002c8e94>] 00000000002c8e94 (LR)
     (XEN)    [<00000000002c95c0>] 00000000002c95c0
     (XEN)    [<0000000000266f60>] setup.c#init_done+0x10/0x20
     (XEN)    [<00000000002ca260>] 00000000002ca260
     (XEN)
     (XEN)
     (XEN) ****************************************
     (XEN) Panic on CPU 0:
     (XEN) CPU0: Unexpected Trap: Data Abort
     (XEN) ****************************************
     (XEN)
     (XEN) Reboot in five seconds...

Best Regards,
Wei
Julien Grall Jan. 7, 2020, 3:12 p.m. UTC | #14
On 07/01/2020 12:55, Wei Xu wrote:
> Hi Julien,
>> As only one entity should manage the UART (i.e Xen or Dom0), we today 
>> assume this will be managed by Xen. Xen should expose a partial 
>> virtual UART (only a few registers are emulating) to dom0 in replacement.
>>
>> This is usually done by the UART driver. Looking at the log you pasted 
>> in a separate e-mail:
>>
>> (XEN) Platform: Generic System
>> (XEN) Unable to initialize acpi uart: -9
>> (XEN) Bad console= option 'dtuart'
>>
>> So Xen didn't manage to initialize the uart. The -9 suggests, Xen 
>> didn't find a driver for your UART. At the moment, Xen is only able to 
>> detect pl011, sbsa, sbsa32 UART for ACPI. What is the type of the UART 
>> used on your platform?
>>
> 
> Thanks!
> Got it.
> Our UART is 8250.

You would need to teach the 8250 driver how to initialize the UART with 
ACPI. It is not very difficult to do it, have a look at the pl011 version.

> 
> Thanks!
> It is not working even I changed the condition to " if ( acpi_disabled ) ".

Doh, thank you for spotting the extra !.

> My grub 2.04 configuration is as below:
> 
>      xen_hypervisor /xen dom0_mem=4G acpi=force loglvl=all guest_loglvl=all
>      xen_module /Image rdinit=/init  acpi=force noinitrd root=/dev/sdb1 rw
> 
> The log with the condition " if ( acpi_disabled ) " is as following:
> 
>      (XEN) Adding cpu 126 to runqueue 0
>      (XEN) Adding cpu 127 to runqueue 0
>      (XEN) alternatives: Patching with alt table 00000000002d4f48 -> 
> 00000000002d5764
>      (XEN) *** LOADING DOMAIN 0 ***
>      (XEN) Loading d0 kernel from boot module @ 0000000016257000
>      (XEN) Allocating 1:1 mappings totalling 4096MB for dom0:
>      (XEN) BANK[0] 0x00000008000000-0x00000010000000 (128MB)
>      (XEN) BANK[1] 0x00000020000000-0x00000038000000 (384MB)
>      (XEN) BANK[2] 0x00000050000000-0x00000080000000 (768MB)
>      (XEN) BANK[3] 0x00202000000000-0x00202080000000 (2048MB)
>      (XEN) BANK[4] 0x002020b0000000-0x002020c0000000 (256MB)
>      (XEN) BANK[5] 0x00202600000000-0x00202620000000 (512MB)
>      (XEN) Grant table range: 0x000000181c7000-0x00000018207000
>      (XEN) Allocating PPI 16 for event channel interrupt
>      (XEN) Loading zImage from 0000000016257000 to 
> 0000000008080000-0000000009981200
>      (XEN) Loading d0 DTB to 0x000000000fe00000-0x000000000fe0025b
>      (XEN) Initial low memory virq threshold set at 0x4000 pages.
>      (XEN) Scrubbing Free RAM in background
>      (XEN) Std. Loglevel: All
>      (XEN) Guest Loglevel: All
>      (XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to switch 
> input)
>      (XEN) Data Abort Trap. Syndrome=0x6
>      (XEN) Walking Hypervisor VA 0x10 on CPU0 via TTBR 0x00000000182ff000
>      (XEN) 0TH[0x0] = 0x0000000018302f7f
>      (XEN) 1ST[0x0] = 0x0000000018300f7f
>      (XEN) 2ND[0x0] = 0x0000000000000000
>      (XEN) CPU0: Unexpected Trap: Data Abort
>      (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
>      (XEN) CPU:    0
>      (XEN) PC:     00000000002b65c8 00000000002b65c8

Can you look with addr2line what this PC refers to?

Cheers,
Wei Xu Jan. 17, 2020, 9:06 a.m. UTC | #15
Hi Julien,

On 2020/1/7 23:12, Julien Grall wrote:
>
>
> On 07/01/2020 12:55, Wei Xu wrote:
>> Hi Julien,
>>> As only one entity should manage the UART (i.e Xen or Dom0), we 
>>> today assume this will be managed by Xen. Xen should expose a 
>>> partial virtual UART (only a few registers are emulating) to dom0 in 
>>> replacement.
>>>
>>> This is usually done by the UART driver. Looking at the log you 
>>> pasted in a separate e-mail:
>>>
>>> (XEN) Platform: Generic System
>>> (XEN) Unable to initialize acpi uart: -9
>>> (XEN) Bad console= option 'dtuart'
>>>
>>> So Xen didn't manage to initialize the uart. The -9 suggests, Xen 
>>> didn't find a driver for your UART. At the moment, Xen is only able 
>>> to detect pl011, sbsa, sbsa32 UART for ACPI. What is the type of the 
>>> UART used on your platform?
>>>
>>
>> Thanks!
>> Got it.
>> Our UART is 8250.
>
> You would need to teach the 8250 driver how to initialize the UART 
> with ACPI. It is not very difficult to do it, have a look at the pl011 
> version.
>
>>
>> Thanks!
>> It is not working even I changed the condition to " if ( 
>> acpi_disabled ) ".
>
> Doh, thank you for spotting the extra !.
>
>> My grub 2.04 configuration is as below:
>>
>>      xen_hypervisor /xen dom0_mem=4G acpi=force loglvl=all 
>> guest_loglvl=all
>>      xen_module /Image rdinit=/init  acpi=force noinitrd 
>> root=/dev/sdb1 rw
>>
>> The log with the condition " if ( acpi_disabled ) " is as following:
>>
>>      (XEN) Adding cpu 126 to runqueue 0
>>      (XEN) Adding cpu 127 to runqueue 0
>>      (XEN) alternatives: Patching with alt table 00000000002d4f48 -> 
>> 00000000002d5764
>>      (XEN) *** LOADING DOMAIN 0 ***
>>      (XEN) Loading d0 kernel from boot module @ 0000000016257000
>>      (XEN) Allocating 1:1 mappings totalling 4096MB for dom0:
>>      (XEN) BANK[0] 0x00000008000000-0x00000010000000 (128MB)
>>      (XEN) BANK[1] 0x00000020000000-0x00000038000000 (384MB)
>>      (XEN) BANK[2] 0x00000050000000-0x00000080000000 (768MB)
>>      (XEN) BANK[3] 0x00202000000000-0x00202080000000 (2048MB)
>>      (XEN) BANK[4] 0x002020b0000000-0x002020c0000000 (256MB)
>>      (XEN) BANK[5] 0x00202600000000-0x00202620000000 (512MB)
>>      (XEN) Grant table range: 0x000000181c7000-0x00000018207000
>>      (XEN) Allocating PPI 16 for event channel interrupt
>>      (XEN) Loading zImage from 0000000016257000 to 
>> 0000000008080000-0000000009981200
>>      (XEN) Loading d0 DTB to 0x000000000fe00000-0x000000000fe0025b
>>      (XEN) Initial low memory virq threshold set at 0x4000 pages.
>>      (XEN) Scrubbing Free RAM in background
>>      (XEN) Std. Loglevel: All
>>      (XEN) Guest Loglevel: All
>>      (XEN) *** Serial input to DOM0 (type 'CTRL-a' three times to 
>> switch input)
>>      (XEN) Data Abort Trap. Syndrome=0x6
>>      (XEN) Walking Hypervisor VA 0x10 on CPU0 via TTBR 
>> 0x00000000182ff000
>>      (XEN) 0TH[0x0] = 0x0000000018302f7f
>>      (XEN) 1ST[0x0] = 0x0000000018300f7f
>>      (XEN) 2ND[0x0] = 0x0000000000000000
>>      (XEN) CPU0: Unexpected Trap: Data Abort
>>      (XEN) ----[ Xen-4.13.0-rc  arm64  debug=y   Not tainted ]----
>>      (XEN) CPU:    0
>>      (XEN) PC:     00000000002b65c8 00000000002b65c8
>
> Can you look with addr2line what this PC refers to?
>

Sorry for the late reply!
The PC refers to fdt_num_mem_rsv during init_done.
But the device_tree_flattened is NULL that the data abort happened.

So I added below changes and the XEN dom0 can be booted.

     diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
     index 1e83351..1ab80a1 100644
     --- a/xen/arch/arm/setup.c
     +++ b/xen/arch/arm/setup.c
     @@ -392,7 +392,8 @@ void __init discard_initial_modules(void)
                   !mfn_valid(maddr_to_mfn(e)) )
                  continue;

     -        dt_unreserved_regions(s, e, init_domheap_pages, 0);
     +       if( acpi_disabled )
     +           dt_unreserved_regions(s, e, init_domheap_pages, 0);
          }

Thank you so much!

Best Regards,
Wei

> Cheers,
>
Julien Grall Jan. 17, 2020, 8:41 p.m. UTC | #16
(Renaming the title to avoid confusion)

On 17/01/2020 09:06, Wei Xu wrote:
> Hi Julien,

Hi Wei,

> On 2020/1/7 23:12, Julien Grall wrote:
> Sorry for the late reply!

Don't worry, thank you for looking into the bug!

> The PC refers to fdt_num_mem_rsv during init_done.
> But the device_tree_flattened is NULL that the data abort happened.

Ah, I didn't realize that device_tree_flattened where still used 
afterwards. Sorry for the breakage. I really need to setup a devbox with 
ACPI so I can test changes properly.

> So I added below changes and the XEN dom0 can be booted.
> 
>      diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
>      index 1e83351..1ab80a1 100644
>      --- a/xen/arch/arm/setup.c
>      +++ b/xen/arch/arm/setup.c
>      @@ -392,7 +392,8 @@ void __init discard_initial_modules(void)
>                    !mfn_valid(maddr_to_mfn(e)) )
>                   continue;
> 
>      -        dt_unreserved_regions(s, e, init_domheap_pages, 0);
>      +       if( acpi_disabled )
>      +           dt_unreserved_regions(s, e, init_domheap_pages, 0);

While I understand how this is fixing your problem, this unfortunately 
means the memory ranges used by the inital modules (e.g Kernel, Initrd) 
will not be re-used by Xen. So this is a "slight" waste of memory.

There are a few other places where dt_unreserved_regions() is called 
(see setup_mm()). However, in the case of setup_mm() we have a pointer 
to DT as we don't know yet we are running on ACPI systems.

But it feels wrong to try to find out the reserved memory range through 
the DT when ACPI will be used. The DT is either going to be nearly 
empty, or contain the full description of the platform. I don't know 
enough to be able to say if something is going to go wrong.

I am thinking to suggest to create an helper that will do the job for 
you. Something like:

void fwtable_unreserved_regions(paddr_t s, paddr_t e,
                                 void (*cb)(paddr_t, paddr_t), int first)
{
    if ( acpi_disabled )
      dt_unreserved_regions(s, e, cb, first);
    else
      cb(s, e);
}

Regarding the else part, this may need some adjustment if we need to 
skip some reserved region for ACPI. On Xen 4.13, we should only have 
usuable RAM in hand (the EFI stub is doing to sorting for us). Do you 
know whether ACPI describes something similar to reserved-memory in DT 
(i.e RAM regions reserved for cma...)?

Cheers,
Wei Xu Jan. 20, 2020, 4:05 a.m. UTC | #17
On 2020/1/18 4:41, Julien Grall wrote:
> (Renaming the title to avoid confusion)
>
> On 17/01/2020 09:06, Wei Xu wrote:
>> Hi Julien,
>
> Hi Wei,
>
>> On 2020/1/7 23:12, Julien Grall wrote:
>> Sorry for the late reply!
>
> Don't worry, thank you for looking into the bug!
>
>> The PC refers to fdt_num_mem_rsv during init_done.
>> But the device_tree_flattened is NULL that the data abort happened.
>
> Ah, I didn't realize that device_tree_flattened where still used 
> afterwards. Sorry for the breakage. I really need to setup a devbox 
> with ACPI so I can test changes properly.
>
>> So I added below changes and the XEN dom0 can be booted.
>>
>>      diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
>>      index 1e83351..1ab80a1 100644
>>      --- a/xen/arch/arm/setup.c
>>      +++ b/xen/arch/arm/setup.c
>>      @@ -392,7 +392,8 @@ void __init discard_initial_modules(void)
>>                    !mfn_valid(maddr_to_mfn(e)) )
>>                   continue;
>>
>>      -        dt_unreserved_regions(s, e, init_domheap_pages, 0);
>>      +       if( acpi_disabled )
>>      +           dt_unreserved_regions(s, e, init_domheap_pages, 0);
>
> While I understand how this is fixing your problem, this unfortunately 
> means the memory ranges used by the inital modules (e.g Kernel, 
> Initrd) will not be re-used by Xen. So this is a "slight" waste of 
> memory.
>
> There are a few other places where dt_unreserved_regions() is called 
> (see setup_mm()). However, in the case of setup_mm() we have a pointer 
> to DT as we don't know yet we are running on ACPI systems.
>
> But it feels wrong to try to find out the reserved memory range 
> through the DT when ACPI will be used. The DT is either going to be 
> nearly empty, or contain the full description of the platform. I don't 
> know enough to be able to say if something is going to go wrong.
>
> I am thinking to suggest to create an helper that will do the job for 
> you. Something like:
>
> void fwtable_unreserved_regions(paddr_t s, paddr_t e,
>                                 void (*cb)(paddr_t, paddr_t), int first)
> {
>    if ( acpi_disabled )
>      dt_unreserved_regions(s, e, cb, first);
>    else
>      cb(s, e);
> }
>
> Regarding the else part, this may need some adjustment if we need to 
> skip some reserved region for ACPI. On Xen 4.13, we should only have 
> usuable RAM in hand (the EFI stub is doing to sorting for us). Do you 
> know whether ACPI describes something similar to reserved-memory in DT 
> (i.e RAM regions reserved for cma...)?
>

Hi Julien,

I think UEFI describes it via ARM_MEMORY_REGION_DESCRIPTOR[1]
and XEN parses it at efi_init_memory but I did not find where to reserve 
the memory.

1: 
https://github.com/tianocore/edk2-platforms/blob/master/Platform/ARM/JunoPkg/Library/ArmJunoLib/ArmJunoMem.c

Thanks!

Best Regards,
Wei

> Cheers,
>
diff mbox series

Patch

diff --git a/xen/arch/arm/vgic-v3.c b/xen/arch/arm/vgic-v3.c
index 422b94f..e802f20 100644
--- a/xen/arch/arm/vgic-v3.c
+++ b/xen/arch/arm/vgic-v3.c
@@ -706,7 +706,7 @@  static int __vgic_v3_distr_common_mmio_read(const char *name, struct vcpu *v,
         goto read_as_zero;
 
     /* Read the active status of an IRQ via GICD/GICR is not supported */
-    case VRANGE32(GICD_ISACTIVER, GICD_ISACTIVER):
+    case VRANGE32(GICD_ISACTIVER, GICD_ISACTIVERN):
     case VRANGE32(GICD_ICACTIVER, GICD_ICACTIVERN):
         goto read_as_zero;