diff mbox series

[v3,4/9] drivers: thermal: tsens: Release device in success path

Message ID 0a969ecd48910dac4da81581eff45b5e579b2bfc.1577976221.git.amit.kucheria@linaro.org (mailing list archive)
State Superseded
Headers show
Series thermal: tsens: Handle critical interrupts | expand

Commit Message

Amit Kucheria Jan. 2, 2020, 2:54 p.m. UTC
We don't currently call put_device in case of successfully initialising
the device.

Allow control to fall through so we can use same code for success and
error paths to put_device.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
---
 drivers/thermal/qcom/tsens-common.c | 2 --
 1 file changed, 2 deletions(-)

Comments

Bjorn Andersson Jan. 2, 2020, 7:29 p.m. UTC | #1
On Thu 02 Jan 06:54 PST 2020, Amit Kucheria wrote:

> We don't currently call put_device in case of successfully initialising
> the device.
> 
> Allow control to fall through so we can use same code for success and
> error paths to put_device.
> 

Given the relationship between priv->dev and op I think this wouldn't be
a problem in practice, but there's two devm_ioremap_resource() done on
op->dev in this function. So you're depending on op->dev to stick
around, but with this patch you're no longer expressing that dependency.

That said, it looks iffy to do devm_ioremap_resource() on op->dev and
then create a regmap on priv->dev using that resource. So I think it
would be better to do platform_get_source() on op, and then
devm_ioremap_resource() on priv->dev, in which case the regmap backing
memory will be related to the same struct device as the regmap and it
makes perfect sense to put_device() the op->dev when you're done
inspecting it's resources.

Regards,
Bjorn

> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> ---
>  drivers/thermal/qcom/tsens-common.c | 2 --
>  1 file changed, 2 deletions(-)
> 
> diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
> index 1cbc5a6e5b4f..e84e94a6f1a7 100644
> --- a/drivers/thermal/qcom/tsens-common.c
> +++ b/drivers/thermal/qcom/tsens-common.c
> @@ -687,8 +687,6 @@ int __init init_common(struct tsens_priv *priv)
>  	tsens_enable_irq(priv);
>  	tsens_debug_init(op);
>  
> -	return 0;
> -
>  err_put_device:
>  	put_device(&op->dev);
>  	return ret;
> -- 
> 2.20.1
>
Amit Kucheria Jan. 30, 2020, 12:49 p.m. UTC | #2
On Fri, Jan 3, 2020 at 12:59 AM Bjorn Andersson
<bjorn.andersson@linaro.org> wrote:
>
> On Thu 02 Jan 06:54 PST 2020, Amit Kucheria wrote:
>
> > We don't currently call put_device in case of successfully initialising
> > the device.
> >
> > Allow control to fall through so we can use same code for success and
> > error paths to put_device.
> >
>
> Given the relationship between priv->dev and op I think this wouldn't be
> a problem in practice, but there's two devm_ioremap_resource() done on
> op->dev in this function. So you're depending on op->dev to stick
> around, but with this patch you're no longer expressing that dependency.
>
> That said, it looks iffy to do devm_ioremap_resource() on op->dev and
> then create a regmap on priv->dev using that resource. So I think it
> would be better to do platform_get_source() on op, and then
> devm_ioremap_resource() on priv->dev, in which case the regmap backing
> memory will be related to the same struct device as the regmap and it
> makes perfect sense to put_device() the op->dev when you're done
> inspecting it's resources.
>

Indeed, thanks for reviewing.

Will fix.

> > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> > ---
> >  drivers/thermal/qcom/tsens-common.c | 2 --
> >  1 file changed, 2 deletions(-)
> >
> > diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
> > index 1cbc5a6e5b4f..e84e94a6f1a7 100644
> > --- a/drivers/thermal/qcom/tsens-common.c
> > +++ b/drivers/thermal/qcom/tsens-common.c
> > @@ -687,8 +687,6 @@ int __init init_common(struct tsens_priv *priv)
> >       tsens_enable_irq(priv);
> >       tsens_debug_init(op);
> >
> > -     return 0;
> > -
> >  err_put_device:
> >       put_device(&op->dev);
> >       return ret;
> > --
> > 2.20.1
> >
diff mbox series

Patch

diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 1cbc5a6e5b4f..e84e94a6f1a7 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -687,8 +687,6 @@  int __init init_common(struct tsens_priv *priv)
 	tsens_enable_irq(priv);
 	tsens_debug_init(op);
 
-	return 0;
-
 err_put_device:
 	put_device(&op->dev);
 	return ret;