diff mbox series

[3/5] IIO: Ingenic JZ47xx: Add touchscreen mode.

Message ID 20200105001639.142061-3-contact@artur-rojek.eu (mailing list archive)
State New, archived
Headers show
Series [1/5] IIO: Ingenic JZ47xx: Add xlate cb to retrieve correct channel idx | expand

Commit Message

Artur Rojek Jan. 5, 2020, 12:16 a.m. UTC
Implement support for the touchscreen mode found in JZ47xx SoCs ADC.

Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
Tested-by: Paul Cercueil <paul@crapouillou.net>
---
 drivers/iio/adc/Kconfig       |   3 +
 drivers/iio/adc/ingenic-adc.c | 120 +++++++++++++++++++++++++++++++++-
 2 files changed, 121 insertions(+), 2 deletions(-)

Comments

Jonathan Cameron Jan. 11, 2020, 11:46 a.m. UTC | #1
On Sun,  5 Jan 2020 01:16:37 +0100
Artur Rojek <contact@artur-rojek.eu> wrote:

> Implement support for the touchscreen mode found in JZ47xx SoCs ADC.
This needs more description.  

Looks like it enables a kfifo and also selects the callback buffer
stuff to run with a generic touchscreen iio-> input driver.

A few other bits inline, but basically fine.

I've never really thought about whether we support a CB buffer
without anything on the IIO side.   That should be possible,
but I'm not sure what odd corner cases will turn up.  I'm guessing
there are some, or you'd not have bothered exposing it here?

Thanks

Jonathan


> 
> Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
> Tested-by: Paul Cercueil <paul@crapouillou.net>
> ---
>  drivers/iio/adc/Kconfig       |   3 +
>  drivers/iio/adc/ingenic-adc.c | 120 +++++++++++++++++++++++++++++++++-
>  2 files changed, 121 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> index 5d8540b7b427..dabbf15032af 100644
> --- a/drivers/iio/adc/Kconfig
> +++ b/drivers/iio/adc/Kconfig
> @@ -446,6 +446,9 @@ config INA2XX_ADC
>  config INGENIC_ADC
>  	tristate "Ingenic JZ47xx SoCs ADC driver"
>  	depends on MIPS || COMPILE_TEST
> +	select IIO_BUFFER
> +	select IIO_BUFFER_CB

Feels like IIO_BUFFER_CB should be selected by the driver that
uses that functionality rather than this one.

> +	select IIO_KFIFO_BUF
>  	help
>  	  Say yes here to build support for the Ingenic JZ47xx SoCs ADC unit.
>  
> diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
> index 7a24bc1dabe1..4dbf15fdd95d 100644
> --- a/drivers/iio/adc/ingenic-adc.c
> +++ b/drivers/iio/adc/ingenic-adc.c
> @@ -8,7 +8,10 @@
>  
>  #include <dt-bindings/iio/adc/ingenic,adc.h>
>  #include <linux/clk.h>
> +#include <linux/iio/buffer.h>
>  #include <linux/iio/iio.h>
> +#include <linux/iio/kfifo_buf.h>
> +#include <linux/interrupt.h>
>  #include <linux/io.h>
>  #include <linux/iopoll.h>
>  #include <linux/kernel.h>
> @@ -20,6 +23,8 @@
>  #define JZ_ADC_REG_CFG			0x04
>  #define JZ_ADC_REG_CTRL			0x08
>  #define JZ_ADC_REG_STATUS		0x0c
> +#define JZ_ADC_REG_ADSAME		0x10
> +#define JZ_ADC_REG_ADWAIT		0x14
>  #define JZ_ADC_REG_ADTCH		0x18
>  #define JZ_ADC_REG_ADBDAT		0x1c
>  #define JZ_ADC_REG_ADSDAT		0x20
> @@ -28,6 +33,9 @@
>  #define JZ_ADC_REG_ENABLE_PD		BIT(7)
>  #define JZ_ADC_REG_CFG_AUX_MD		(BIT(0) | BIT(1))
>  #define JZ_ADC_REG_CFG_BAT_MD		BIT(4)
> +#define JZ_ADC_REG_CFG_PULL_UP(n)	((n) << 16)
> +#define JZ_ADC_REG_CFG_SAMPLE_NUM(n)	((n) << 10)
> +#define JZ_ADC_REG_CFG_TOUCH_OPS_MASK	(BIT(31) | GENMASK(23, 10))
>  #define JZ_ADC_REG_ADCLK_CLKDIV_LSB	0
>  #define JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB	16
>  #define JZ4770_ADC_REG_ADCLK_CLKDIV10US_LSB	8
> @@ -44,6 +52,14 @@
>  #define JZ4770_ADC_BATTERY_VREF			6600
>  #define JZ4770_ADC_BATTERY_VREF_BITS		12
>  
> +#define JZ_ADC_IRQ_AUX			BIT(0)
> +#define JZ_ADC_IRQ_BATTERY		BIT(1)
> +#define JZ_ADC_IRQ_TOUCH		BIT(2)
> +#define JZ_ADC_IRQ_PEN_DOWN		BIT(3)
> +#define JZ_ADC_IRQ_PEN_UP		BIT(4)
> +#define JZ_ADC_IRQ_PEN_DOWN_SLEEP	BIT(5)
> +#define JZ_ADC_IRQ_SLEEP		BIT(7)
> +
>  struct ingenic_adc;
>  
>  struct ingenic_adc_soc_data {
> @@ -411,6 +427,30 @@ static const struct iio_info ingenic_adc_info = {
>  };
>  
>  static const struct iio_chan_spec ingenic_channels[] = {
> +	{
> +		.extend_name = "touchscreen_xp",

Note that adding extended names:

1) Needs documenting as it create ABI - so something in
Documentation/ABI/testing/sysfs-bus-iio-*

2) Breaks any generic userspace application.

Why can't we use modified and an axis to identify this?


> +		.type = IIO_POSITIONRELATIVE,
> +		.indexed = 1,
> +		.channel = INGENIC_ADC_TOUCH_XP,
> +		.scan_index = 0,
> +		.scan_type = {
> +			.sign = 'u',
> +			.realbits = 12,
> +			.storagebits = 16
> +		},
> +	},
> +	{
> +		.extend_name = "touchscreen_yp",
> +		.type = IIO_POSITIONRELATIVE,
> +		.indexed = 1,
> +		.channel = INGENIC_ADC_TOUCH_YP,
> +		.scan_index = 1,
> +		.scan_type = {
> +			.sign = 'u',
> +			.realbits = 12,
> +			.storagebits = 16
> +		},
> +	},
>  	{
>  		.extend_name = "aux",
>  		.type = IIO_VOLTAGE,
> @@ -418,6 +458,7 @@ static const struct iio_chan_spec ingenic_channels[] = {
>  				      BIT(IIO_CHAN_INFO_SCALE),
>  		.indexed = 1,
>  		.channel = INGENIC_ADC_AUX,
> +		.scan_index = -1
>  	},
>  	{
>  		.extend_name = "battery",
> @@ -428,6 +469,7 @@ static const struct iio_chan_spec ingenic_channels[] = {
>  						BIT(IIO_CHAN_INFO_SCALE),
>  		.indexed = 1,
>  		.channel = INGENIC_ADC_BATTERY,
> +		.scan_index = -1
>  	},
>  	{ /* Must always be last in the array. */
>  		.extend_name = "aux2",
> @@ -436,16 +478,70 @@ static const struct iio_chan_spec ingenic_channels[] = {
>  				      BIT(IIO_CHAN_INFO_SCALE),
>  		.indexed = 1,
>  		.channel = INGENIC_ADC_AUX2,
> +		.scan_index = -1
>  	},
>  };
>  
> +static int ingenic_adc_buffer_enable(struct iio_dev *iio_dev)
> +{
> +	struct ingenic_adc *adc = iio_priv(iio_dev);
> +
> +	clk_enable(adc->clk);
> +	/* It takes significant time for the touchscreen hw to stabilize. */
> +	msleep(50);
> +	ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK,
> +			       JZ_ADC_REG_CFG_SAMPLE_NUM(4) |
> +			       JZ_ADC_REG_CFG_PULL_UP(4));
> +	writew(80, adc->base + JZ_ADC_REG_ADWAIT);
> +	writew(2, adc->base + JZ_ADC_REG_ADSAME);
> +	writeb((u8)~JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_CTRL);
> +	writel(0, adc->base + JZ_ADC_REG_ADTCH);
> +	ingenic_adc_enable(adc, 2, true);
> +
> +	return 0;
> +}
> +
> +static int ingenic_adc_buffer_disable(struct iio_dev *iio_dev)
> +{
> +	struct ingenic_adc *adc = iio_priv(iio_dev);
> +
> +	ingenic_adc_enable(adc, 2, false);
> +	writeb(0xff, adc->base + JZ_ADC_REG_CTRL);
> +	writeb(0xff, adc->base + JZ_ADC_REG_STATUS);
> +	ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK, 0);
> +	writew(0, adc->base + JZ_ADC_REG_ADSAME);
> +	writew(0, adc->base + JZ_ADC_REG_ADWAIT);
> +	clk_disable(adc->clk);
> +
> +	return 0;
> +}
> +
> +static const struct iio_buffer_setup_ops ingenic_buffer_setup_ops = {
> +	.postenable = &ingenic_adc_buffer_enable,
> +	.predisable = &ingenic_adc_buffer_disable
> +};
> +
> +static irqreturn_t ingenic_adc_irq(int irq, void *data)
> +{
> +	struct iio_dev *iio_dev = data;
> +	struct ingenic_adc *adc = iio_priv(iio_dev);
> +	u32 tdat;
> +
> +	tdat = readl(adc->base + JZ_ADC_REG_ADTCH);
> +	iio_push_to_buffers(iio_dev, &tdat);
> +	writeb(JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_STATUS);
> +
> +	return IRQ_HANDLED;
> +}
> +
>  static int ingenic_adc_probe(struct platform_device *pdev)
>  {
>  	struct device *dev = &pdev->dev;
>  	struct iio_dev *iio_dev;
>  	struct ingenic_adc *adc;
>  	const struct ingenic_adc_soc_data *soc_data;
> -	int ret;
> +	struct iio_buffer *buffer;
> +	int irq, ret;
>  
>  	soc_data = device_get_match_data(dev);
>  	if (!soc_data)
> @@ -460,6 +556,18 @@ static int ingenic_adc_probe(struct platform_device *pdev)
>  	mutex_init(&adc->aux_lock);
>  	adc->soc_data = soc_data;
>  
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0) {
> +		dev_err(dev, "Failed to get irq: %d\n", irq);
> +		return irq;
> +	}
> +	ret = devm_request_irq(dev, irq, ingenic_adc_irq, 0,
> +			       dev_name(dev), iio_dev);
> +	if (ret < 0) {
> +		dev_err(dev, "Failed to request irq: %d\n", ret);
> +		return ret;
> +	}
> +
>  	adc->base = devm_platform_ioremap_resource(pdev, 0);
>  	if (IS_ERR(adc->base))
>  		return PTR_ERR(adc->base);
> @@ -499,7 +607,8 @@ static int ingenic_adc_probe(struct platform_device *pdev)
>  
>  	iio_dev->dev.parent = dev;
>  	iio_dev->name = "jz-adc";
> -	iio_dev->modes = INDIO_DIRECT_MODE;
> +	iio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
> +	iio_dev->setup_ops = &ingenic_buffer_setup_ops;
>  	iio_dev->channels = ingenic_channels;
>  	iio_dev->num_channels = ARRAY_SIZE(ingenic_channels);
>  	/* Remove AUX2 from the list of supported channels. */
> @@ -507,6 +616,13 @@ static int ingenic_adc_probe(struct platform_device *pdev)
>  		iio_dev->num_channels -= 1;
>  	iio_dev->info = &ingenic_adc_info;
>  
> +	buffer = devm_iio_kfifo_allocate(dev);
> +	if (!buffer) {
> +		dev_err(dev, "Unable to add IIO buffer\n");
> +		return -ENOMEM;
> +	}
> +	iio_device_attach_buffer(iio_dev, buffer);
> +
>  	ret = devm_iio_device_register(dev, iio_dev);
>  	if (ret)
>  		dev_err(dev, "Unable to register IIO device\n");
Paul Cercueil Jan. 13, 2020, 2:59 p.m. UTC | #2
Hi Jonathan,


Le sam., janv. 11, 2020 at 11:46, Jonathan Cameron 
<jic23@jic23.retrosnub.co.uk> a écrit :
> On Sun,  5 Jan 2020 01:16:37 +0100
> Artur Rojek <contact@artur-rojek.eu> wrote:
> 
>>  Implement support for the touchscreen mode found in JZ47xx SoCs ADC.
> This needs more description.
> 
> Looks like it enables a kfifo and also selects the callback buffer
> stuff to run with a generic touchscreen iio-> input driver.
> 
> A few other bits inline, but basically fine.
> 
> I've never really thought about whether we support a CB buffer
> without anything on the IIO side.   That should be possible,
> but I'm not sure what odd corner cases will turn up.  I'm guessing
> there are some, or you'd not have bothered exposing it here?

I'm sorry, what do you mean by "nothing on the IIO side"?


> 
> Thanks
> 
> Jonathan
> 
> 
>> 
>>  Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
>>  Tested-by: Paul Cercueil <paul@crapouillou.net>
>>  ---
>>   drivers/iio/adc/Kconfig       |   3 +
>>   drivers/iio/adc/ingenic-adc.c | 120 
>> +++++++++++++++++++++++++++++++++-
>>   2 files changed, 121 insertions(+), 2 deletions(-)
>> 
>>  diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
>>  index 5d8540b7b427..dabbf15032af 100644
>>  --- a/drivers/iio/adc/Kconfig
>>  +++ b/drivers/iio/adc/Kconfig
>>  @@ -446,6 +446,9 @@ config INA2XX_ADC
>>   config INGENIC_ADC
>>   	tristate "Ingenic JZ47xx SoCs ADC driver"
>>   	depends on MIPS || COMPILE_TEST
>>  +	select IIO_BUFFER
>>  +	select IIO_BUFFER_CB
> 
> Feels like IIO_BUFFER_CB should be selected by the driver that
> uses that functionality rather than this one.
> 
>>  +	select IIO_KFIFO_BUF
>>   	help
>>   	  Say yes here to build support for the Ingenic JZ47xx SoCs ADC 
>> unit.
>> 
>>  diff --git a/drivers/iio/adc/ingenic-adc.c 
>> b/drivers/iio/adc/ingenic-adc.c
>>  index 7a24bc1dabe1..4dbf15fdd95d 100644
>>  --- a/drivers/iio/adc/ingenic-adc.c
>>  +++ b/drivers/iio/adc/ingenic-adc.c
>>  @@ -8,7 +8,10 @@
>> 
>>   #include <dt-bindings/iio/adc/ingenic,adc.h>
>>   #include <linux/clk.h>
>>  +#include <linux/iio/buffer.h>
>>   #include <linux/iio/iio.h>
>>  +#include <linux/iio/kfifo_buf.h>
>>  +#include <linux/interrupt.h>
>>   #include <linux/io.h>
>>   #include <linux/iopoll.h>
>>   #include <linux/kernel.h>
>>  @@ -20,6 +23,8 @@
>>   #define JZ_ADC_REG_CFG			0x04
>>   #define JZ_ADC_REG_CTRL			0x08
>>   #define JZ_ADC_REG_STATUS		0x0c
>>  +#define JZ_ADC_REG_ADSAME		0x10
>>  +#define JZ_ADC_REG_ADWAIT		0x14
>>   #define JZ_ADC_REG_ADTCH		0x18
>>   #define JZ_ADC_REG_ADBDAT		0x1c
>>   #define JZ_ADC_REG_ADSDAT		0x20
>>  @@ -28,6 +33,9 @@
>>   #define JZ_ADC_REG_ENABLE_PD		BIT(7)
>>   #define JZ_ADC_REG_CFG_AUX_MD		(BIT(0) | BIT(1))
>>   #define JZ_ADC_REG_CFG_BAT_MD		BIT(4)
>>  +#define JZ_ADC_REG_CFG_PULL_UP(n)	((n) << 16)
>>  +#define JZ_ADC_REG_CFG_SAMPLE_NUM(n)	((n) << 10)
>>  +#define JZ_ADC_REG_CFG_TOUCH_OPS_MASK	(BIT(31) | GENMASK(23, 10))
>>   #define JZ_ADC_REG_ADCLK_CLKDIV_LSB	0
>>   #define JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB	16
>>   #define JZ4770_ADC_REG_ADCLK_CLKDIV10US_LSB	8
>>  @@ -44,6 +52,14 @@
>>   #define JZ4770_ADC_BATTERY_VREF			6600
>>   #define JZ4770_ADC_BATTERY_VREF_BITS		12
>> 
>>  +#define JZ_ADC_IRQ_AUX			BIT(0)
>>  +#define JZ_ADC_IRQ_BATTERY		BIT(1)
>>  +#define JZ_ADC_IRQ_TOUCH		BIT(2)
>>  +#define JZ_ADC_IRQ_PEN_DOWN		BIT(3)
>>  +#define JZ_ADC_IRQ_PEN_UP		BIT(4)
>>  +#define JZ_ADC_IRQ_PEN_DOWN_SLEEP	BIT(5)
>>  +#define JZ_ADC_IRQ_SLEEP		BIT(7)
>>  +
>>   struct ingenic_adc;
>> 
>>   struct ingenic_adc_soc_data {
>>  @@ -411,6 +427,30 @@ static const struct iio_info ingenic_adc_info 
>> = {
>>   };
>> 
>>   static const struct iio_chan_spec ingenic_channels[] = {
>>  +	{
>>  +		.extend_name = "touchscreen_xp",
> 
> Note that adding extended names:
> 
> 1) Needs documenting as it create ABI - so something in
> Documentation/ABI/testing/sysfs-bus-iio-*
> 
> 2) Breaks any generic userspace application.
> 
> Why can't we use modified and an axis to identify this?

I'm in a good place to know that extended names are bad. The problem 
here is that Xn/Yn channels will be added later (we have a board that 
has one joystick connected to Xp/Yp, and a second joystick connected to 
Xn/Yn). I assume that it is not possible to have two channels with the 
same type and modifier?

Alternatively I believe we could also have the first two channels as 
X/Y single-ended, and then two channels as X/Y differential, and do 
some easy math in the joystick driver, but that would make it pretty 
hardware-specific.

Cheers,
-Paul

> 
>>  +		.type = IIO_POSITIONRELATIVE,
>>  +		.indexed = 1,
>>  +		.channel = INGENIC_ADC_TOUCH_XP,
>>  +		.scan_index = 0,
>>  +		.scan_type = {
>>  +			.sign = 'u',
>>  +			.realbits = 12,
>>  +			.storagebits = 16
>>  +		},
>>  +	},
>>  +	{
>>  +		.extend_name = "touchscreen_yp",
>>  +		.type = IIO_POSITIONRELATIVE,
>>  +		.indexed = 1,
>>  +		.channel = INGENIC_ADC_TOUCH_YP,
>>  +		.scan_index = 1,
>>  +		.scan_type = {
>>  +			.sign = 'u',
>>  +			.realbits = 12,
>>  +			.storagebits = 16
>>  +		},
>>  +	},
>>   	{
>>   		.extend_name = "aux",
>>   		.type = IIO_VOLTAGE,
>>  @@ -418,6 +458,7 @@ static const struct iio_chan_spec 
>> ingenic_channels[] = {
>>   				      BIT(IIO_CHAN_INFO_SCALE),
>>   		.indexed = 1,
>>   		.channel = INGENIC_ADC_AUX,
>>  +		.scan_index = -1
>>   	},
>>   	{
>>   		.extend_name = "battery",
>>  @@ -428,6 +469,7 @@ static const struct iio_chan_spec 
>> ingenic_channels[] = {
>>   						BIT(IIO_CHAN_INFO_SCALE),
>>   		.indexed = 1,
>>   		.channel = INGENIC_ADC_BATTERY,
>>  +		.scan_index = -1
>>   	},
>>   	{ /* Must always be last in the array. */
>>   		.extend_name = "aux2",
>>  @@ -436,16 +478,70 @@ static const struct iio_chan_spec 
>> ingenic_channels[] = {
>>   				      BIT(IIO_CHAN_INFO_SCALE),
>>   		.indexed = 1,
>>   		.channel = INGENIC_ADC_AUX2,
>>  +		.scan_index = -1
>>   	},
>>   };
>> 
>>  +static int ingenic_adc_buffer_enable(struct iio_dev *iio_dev)
>>  +{
>>  +	struct ingenic_adc *adc = iio_priv(iio_dev);
>>  +
>>  +	clk_enable(adc->clk);
>>  +	/* It takes significant time for the touchscreen hw to stabilize. 
>> */
>>  +	msleep(50);
>>  +	ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK,
>>  +			       JZ_ADC_REG_CFG_SAMPLE_NUM(4) |
>>  +			       JZ_ADC_REG_CFG_PULL_UP(4));
>>  +	writew(80, adc->base + JZ_ADC_REG_ADWAIT);
>>  +	writew(2, adc->base + JZ_ADC_REG_ADSAME);
>>  +	writeb((u8)~JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_CTRL);
>>  +	writel(0, adc->base + JZ_ADC_REG_ADTCH);
>>  +	ingenic_adc_enable(adc, 2, true);
>>  +
>>  +	return 0;
>>  +}
>>  +
>>  +static int ingenic_adc_buffer_disable(struct iio_dev *iio_dev)
>>  +{
>>  +	struct ingenic_adc *adc = iio_priv(iio_dev);
>>  +
>>  +	ingenic_adc_enable(adc, 2, false);
>>  +	writeb(0xff, adc->base + JZ_ADC_REG_CTRL);
>>  +	writeb(0xff, adc->base + JZ_ADC_REG_STATUS);
>>  +	ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK, 0);
>>  +	writew(0, adc->base + JZ_ADC_REG_ADSAME);
>>  +	writew(0, adc->base + JZ_ADC_REG_ADWAIT);
>>  +	clk_disable(adc->clk);
>>  +
>>  +	return 0;
>>  +}
>>  +
>>  +static const struct iio_buffer_setup_ops ingenic_buffer_setup_ops 
>> = {
>>  +	.postenable = &ingenic_adc_buffer_enable,
>>  +	.predisable = &ingenic_adc_buffer_disable
>>  +};
>>  +
>>  +static irqreturn_t ingenic_adc_irq(int irq, void *data)
>>  +{
>>  +	struct iio_dev *iio_dev = data;
>>  +	struct ingenic_adc *adc = iio_priv(iio_dev);
>>  +	u32 tdat;
>>  +
>>  +	tdat = readl(adc->base + JZ_ADC_REG_ADTCH);
>>  +	iio_push_to_buffers(iio_dev, &tdat);
>>  +	writeb(JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_STATUS);
>>  +
>>  +	return IRQ_HANDLED;
>>  +}
>>  +
>>   static int ingenic_adc_probe(struct platform_device *pdev)
>>   {
>>   	struct device *dev = &pdev->dev;
>>   	struct iio_dev *iio_dev;
>>   	struct ingenic_adc *adc;
>>   	const struct ingenic_adc_soc_data *soc_data;
>>  -	int ret;
>>  +	struct iio_buffer *buffer;
>>  +	int irq, ret;
>> 
>>   	soc_data = device_get_match_data(dev);
>>   	if (!soc_data)
>>  @@ -460,6 +556,18 @@ static int ingenic_adc_probe(struct 
>> platform_device *pdev)
>>   	mutex_init(&adc->aux_lock);
>>   	adc->soc_data = soc_data;
>> 
>>  +	irq = platform_get_irq(pdev, 0);
>>  +	if (irq < 0) {
>>  +		dev_err(dev, "Failed to get irq: %d\n", irq);
>>  +		return irq;
>>  +	}
>>  +	ret = devm_request_irq(dev, irq, ingenic_adc_irq, 0,
>>  +			       dev_name(dev), iio_dev);
>>  +	if (ret < 0) {
>>  +		dev_err(dev, "Failed to request irq: %d\n", ret);
>>  +		return ret;
>>  +	}
>>  +
>>   	adc->base = devm_platform_ioremap_resource(pdev, 0);
>>   	if (IS_ERR(adc->base))
>>   		return PTR_ERR(adc->base);
>>  @@ -499,7 +607,8 @@ static int ingenic_adc_probe(struct 
>> platform_device *pdev)
>> 
>>   	iio_dev->dev.parent = dev;
>>   	iio_dev->name = "jz-adc";
>>  -	iio_dev->modes = INDIO_DIRECT_MODE;
>>  +	iio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
>>  +	iio_dev->setup_ops = &ingenic_buffer_setup_ops;
>>   	iio_dev->channels = ingenic_channels;
>>   	iio_dev->num_channels = ARRAY_SIZE(ingenic_channels);
>>   	/* Remove AUX2 from the list of supported channels. */
>>  @@ -507,6 +616,13 @@ static int ingenic_adc_probe(struct 
>> platform_device *pdev)
>>   		iio_dev->num_channels -= 1;
>>   	iio_dev->info = &ingenic_adc_info;
>> 
>>  +	buffer = devm_iio_kfifo_allocate(dev);
>>  +	if (!buffer) {
>>  +		dev_err(dev, "Unable to add IIO buffer\n");
>>  +		return -ENOMEM;
>>  +	}
>>  +	iio_device_attach_buffer(iio_dev, buffer);
>>  +
>>   	ret = devm_iio_device_register(dev, iio_dev);
>>   	if (ret)
>>   		dev_err(dev, "Unable to register IIO device\n");
>
Jonathan Cameron Jan. 17, 2020, 5:17 p.m. UTC | #3
On Mon, 13 Jan 2020 11:59:00 -0300
Paul Cercueil <paul@crapouillou.net> wrote:

> Hi Jonathan,
> 
> 
> Le sam., janv. 11, 2020 at 11:46, Jonathan Cameron 
> <jic23@jic23.retrosnub.co.uk> a écrit :
> > On Sun,  5 Jan 2020 01:16:37 +0100
> > Artur Rojek <contact@artur-rojek.eu> wrote:
> >   
> >>  Implement support for the touchscreen mode found in JZ47xx SoCs ADC.  
> > This needs more description.
> > 
> > Looks like it enables a kfifo and also selects the callback buffer
> > stuff to run with a generic touchscreen iio-> input driver.
> > 
> > A few other bits inline, but basically fine.
> > 
> > I've never really thought about whether we support a CB buffer
> > without anything on the IIO side.   That should be possible,
> > but I'm not sure what odd corner cases will turn up.  I'm guessing
> > there are some, or you'd not have bothered exposing it here?  
> 
> I'm sorry, what do you mean by "nothing on the IIO side"?

If these channels are only used for touchscreen, why expose them
as an IIO Kfifo?

That's the IIO userspace interface, but you really just want them
to be available via the cb buffer (which isn't actually a buffer,
it calls the function without any buffering).

J
> 
> 
> > 
> > Thanks
> > 
> > Jonathan
> > 
> >   
> >> 
> >>  Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
> >>  Tested-by: Paul Cercueil <paul@crapouillou.net>
> >>  ---
> >>   drivers/iio/adc/Kconfig       |   3 +
> >>   drivers/iio/adc/ingenic-adc.c | 120 
> >> +++++++++++++++++++++++++++++++++-
> >>   2 files changed, 121 insertions(+), 2 deletions(-)
> >> 
> >>  diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> >>  index 5d8540b7b427..dabbf15032af 100644
> >>  --- a/drivers/iio/adc/Kconfig
> >>  +++ b/drivers/iio/adc/Kconfig
> >>  @@ -446,6 +446,9 @@ config INA2XX_ADC
> >>   config INGENIC_ADC
> >>   	tristate "Ingenic JZ47xx SoCs ADC driver"
> >>   	depends on MIPS || COMPILE_TEST
> >>  +	select IIO_BUFFER
> >>  +	select IIO_BUFFER_CB  
> > 
> > Feels like IIO_BUFFER_CB should be selected by the driver that
> > uses that functionality rather than this one.
> >   
> >>  +	select IIO_KFIFO_BUF
> >>   	help
> >>   	  Say yes here to build support for the Ingenic JZ47xx SoCs ADC 
> >> unit.
> >> 
> >>  diff --git a/drivers/iio/adc/ingenic-adc.c 
> >> b/drivers/iio/adc/ingenic-adc.c
> >>  index 7a24bc1dabe1..4dbf15fdd95d 100644
> >>  --- a/drivers/iio/adc/ingenic-adc.c
> >>  +++ b/drivers/iio/adc/ingenic-adc.c
> >>  @@ -8,7 +8,10 @@
> >> 
> >>   #include <dt-bindings/iio/adc/ingenic,adc.h>
> >>   #include <linux/clk.h>
> >>  +#include <linux/iio/buffer.h>
> >>   #include <linux/iio/iio.h>
> >>  +#include <linux/iio/kfifo_buf.h>
> >>  +#include <linux/interrupt.h>
> >>   #include <linux/io.h>
> >>   #include <linux/iopoll.h>
> >>   #include <linux/kernel.h>
> >>  @@ -20,6 +23,8 @@
> >>   #define JZ_ADC_REG_CFG			0x04
> >>   #define JZ_ADC_REG_CTRL			0x08
> >>   #define JZ_ADC_REG_STATUS		0x0c
> >>  +#define JZ_ADC_REG_ADSAME		0x10
> >>  +#define JZ_ADC_REG_ADWAIT		0x14
> >>   #define JZ_ADC_REG_ADTCH		0x18
> >>   #define JZ_ADC_REG_ADBDAT		0x1c
> >>   #define JZ_ADC_REG_ADSDAT		0x20
> >>  @@ -28,6 +33,9 @@
> >>   #define JZ_ADC_REG_ENABLE_PD		BIT(7)
> >>   #define JZ_ADC_REG_CFG_AUX_MD		(BIT(0) | BIT(1))
> >>   #define JZ_ADC_REG_CFG_BAT_MD		BIT(4)
> >>  +#define JZ_ADC_REG_CFG_PULL_UP(n)	((n) << 16)
> >>  +#define JZ_ADC_REG_CFG_SAMPLE_NUM(n)	((n) << 10)
> >>  +#define JZ_ADC_REG_CFG_TOUCH_OPS_MASK	(BIT(31) | GENMASK(23, 10))
> >>   #define JZ_ADC_REG_ADCLK_CLKDIV_LSB	0
> >>   #define JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB	16
> >>   #define JZ4770_ADC_REG_ADCLK_CLKDIV10US_LSB	8
> >>  @@ -44,6 +52,14 @@
> >>   #define JZ4770_ADC_BATTERY_VREF			6600
> >>   #define JZ4770_ADC_BATTERY_VREF_BITS		12
> >> 
> >>  +#define JZ_ADC_IRQ_AUX			BIT(0)
> >>  +#define JZ_ADC_IRQ_BATTERY		BIT(1)
> >>  +#define JZ_ADC_IRQ_TOUCH		BIT(2)
> >>  +#define JZ_ADC_IRQ_PEN_DOWN		BIT(3)
> >>  +#define JZ_ADC_IRQ_PEN_UP		BIT(4)
> >>  +#define JZ_ADC_IRQ_PEN_DOWN_SLEEP	BIT(5)
> >>  +#define JZ_ADC_IRQ_SLEEP		BIT(7)
> >>  +
> >>   struct ingenic_adc;
> >> 
> >>   struct ingenic_adc_soc_data {
> >>  @@ -411,6 +427,30 @@ static const struct iio_info ingenic_adc_info 
> >> = {
> >>   };
> >> 
> >>   static const struct iio_chan_spec ingenic_channels[] = {
> >>  +	{
> >>  +		.extend_name = "touchscreen_xp",  
> > 
> > Note that adding extended names:
> > 
> > 1) Needs documenting as it create ABI - so something in
> > Documentation/ABI/testing/sysfs-bus-iio-*
> > 
> > 2) Breaks any generic userspace application.
> > 
> > Why can't we use modified and an axis to identify this?  
> 
> I'm in a good place to know that extended names are bad. The problem 
> here is that Xn/Yn channels will be added later (we have a board that 
> has one joystick connected to Xp/Yp, and a second joystick connected to 
> Xn/Yn). I assume that it is not possible to have two channels with the 
> same type and modifier?
> 
> Alternatively I believe we could also have the first two channels as 
> X/Y single-ended, and then two channels as X/Y differential, and do 
> some easy math in the joystick driver, but that would make it pretty 
> hardware-specific.
> 
> Cheers,
> -Paul
> 
> >   
> >>  +		.type = IIO_POSITIONRELATIVE,
> >>  +		.indexed = 1,
> >>  +		.channel = INGENIC_ADC_TOUCH_XP,
> >>  +		.scan_index = 0,
> >>  +		.scan_type = {
> >>  +			.sign = 'u',
> >>  +			.realbits = 12,
> >>  +			.storagebits = 16
> >>  +		},
> >>  +	},
> >>  +	{
> >>  +		.extend_name = "touchscreen_yp",
> >>  +		.type = IIO_POSITIONRELATIVE,
> >>  +		.indexed = 1,
> >>  +		.channel = INGENIC_ADC_TOUCH_YP,
> >>  +		.scan_index = 1,
> >>  +		.scan_type = {
> >>  +			.sign = 'u',
> >>  +			.realbits = 12,
> >>  +			.storagebits = 16
> >>  +		},
> >>  +	},
> >>   	{
> >>   		.extend_name = "aux",
> >>   		.type = IIO_VOLTAGE,
> >>  @@ -418,6 +458,7 @@ static const struct iio_chan_spec 
> >> ingenic_channels[] = {
> >>   				      BIT(IIO_CHAN_INFO_SCALE),
> >>   		.indexed = 1,
> >>   		.channel = INGENIC_ADC_AUX,
> >>  +		.scan_index = -1
> >>   	},
> >>   	{
> >>   		.extend_name = "battery",
> >>  @@ -428,6 +469,7 @@ static const struct iio_chan_spec 
> >> ingenic_channels[] = {
> >>   						BIT(IIO_CHAN_INFO_SCALE),
> >>   		.indexed = 1,
> >>   		.channel = INGENIC_ADC_BATTERY,
> >>  +		.scan_index = -1
> >>   	},
> >>   	{ /* Must always be last in the array. */
> >>   		.extend_name = "aux2",
> >>  @@ -436,16 +478,70 @@ static const struct iio_chan_spec 
> >> ingenic_channels[] = {
> >>   				      BIT(IIO_CHAN_INFO_SCALE),
> >>   		.indexed = 1,
> >>   		.channel = INGENIC_ADC_AUX2,
> >>  +		.scan_index = -1
> >>   	},
> >>   };
> >> 
> >>  +static int ingenic_adc_buffer_enable(struct iio_dev *iio_dev)
> >>  +{
> >>  +	struct ingenic_adc *adc = iio_priv(iio_dev);
> >>  +
> >>  +	clk_enable(adc->clk);
> >>  +	/* It takes significant time for the touchscreen hw to stabilize. 
> >> */
> >>  +	msleep(50);
> >>  +	ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK,
> >>  +			       JZ_ADC_REG_CFG_SAMPLE_NUM(4) |
> >>  +			       JZ_ADC_REG_CFG_PULL_UP(4));
> >>  +	writew(80, adc->base + JZ_ADC_REG_ADWAIT);
> >>  +	writew(2, adc->base + JZ_ADC_REG_ADSAME);
> >>  +	writeb((u8)~JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_CTRL);
> >>  +	writel(0, adc->base + JZ_ADC_REG_ADTCH);
> >>  +	ingenic_adc_enable(adc, 2, true);
> >>  +
> >>  +	return 0;
> >>  +}
> >>  +
> >>  +static int ingenic_adc_buffer_disable(struct iio_dev *iio_dev)
> >>  +{
> >>  +	struct ingenic_adc *adc = iio_priv(iio_dev);
> >>  +
> >>  +	ingenic_adc_enable(adc, 2, false);
> >>  +	writeb(0xff, adc->base + JZ_ADC_REG_CTRL);
> >>  +	writeb(0xff, adc->base + JZ_ADC_REG_STATUS);
> >>  +	ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK, 0);
> >>  +	writew(0, adc->base + JZ_ADC_REG_ADSAME);
> >>  +	writew(0, adc->base + JZ_ADC_REG_ADWAIT);
> >>  +	clk_disable(adc->clk);
> >>  +
> >>  +	return 0;
> >>  +}
> >>  +
> >>  +static const struct iio_buffer_setup_ops ingenic_buffer_setup_ops 
> >> = {
> >>  +	.postenable = &ingenic_adc_buffer_enable,
> >>  +	.predisable = &ingenic_adc_buffer_disable
> >>  +};
> >>  +
> >>  +static irqreturn_t ingenic_adc_irq(int irq, void *data)
> >>  +{
> >>  +	struct iio_dev *iio_dev = data;
> >>  +	struct ingenic_adc *adc = iio_priv(iio_dev);
> >>  +	u32 tdat;
> >>  +
> >>  +	tdat = readl(adc->base + JZ_ADC_REG_ADTCH);
> >>  +	iio_push_to_buffers(iio_dev, &tdat);
> >>  +	writeb(JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_STATUS);
> >>  +
> >>  +	return IRQ_HANDLED;
> >>  +}
> >>  +
> >>   static int ingenic_adc_probe(struct platform_device *pdev)
> >>   {
> >>   	struct device *dev = &pdev->dev;
> >>   	struct iio_dev *iio_dev;
> >>   	struct ingenic_adc *adc;
> >>   	const struct ingenic_adc_soc_data *soc_data;
> >>  -	int ret;
> >>  +	struct iio_buffer *buffer;
> >>  +	int irq, ret;
> >> 
> >>   	soc_data = device_get_match_data(dev);
> >>   	if (!soc_data)
> >>  @@ -460,6 +556,18 @@ static int ingenic_adc_probe(struct 
> >> platform_device *pdev)
> >>   	mutex_init(&adc->aux_lock);
> >>   	adc->soc_data = soc_data;
> >> 
> >>  +	irq = platform_get_irq(pdev, 0);
> >>  +	if (irq < 0) {
> >>  +		dev_err(dev, "Failed to get irq: %d\n", irq);
> >>  +		return irq;
> >>  +	}
> >>  +	ret = devm_request_irq(dev, irq, ingenic_adc_irq, 0,
> >>  +			       dev_name(dev), iio_dev);
> >>  +	if (ret < 0) {
> >>  +		dev_err(dev, "Failed to request irq: %d\n", ret);
> >>  +		return ret;
> >>  +	}
> >>  +
> >>   	adc->base = devm_platform_ioremap_resource(pdev, 0);
> >>   	if (IS_ERR(adc->base))
> >>   		return PTR_ERR(adc->base);
> >>  @@ -499,7 +607,8 @@ static int ingenic_adc_probe(struct 
> >> platform_device *pdev)
> >> 
> >>   	iio_dev->dev.parent = dev;
> >>   	iio_dev->name = "jz-adc";
> >>  -	iio_dev->modes = INDIO_DIRECT_MODE;
> >>  +	iio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
> >>  +	iio_dev->setup_ops = &ingenic_buffer_setup_ops;
> >>   	iio_dev->channels = ingenic_channels;
> >>   	iio_dev->num_channels = ARRAY_SIZE(ingenic_channels);
> >>   	/* Remove AUX2 from the list of supported channels. */
> >>  @@ -507,6 +616,13 @@ static int ingenic_adc_probe(struct 
> >> platform_device *pdev)
> >>   		iio_dev->num_channels -= 1;
> >>   	iio_dev->info = &ingenic_adc_info;
> >> 
> >>  +	buffer = devm_iio_kfifo_allocate(dev);
> >>  +	if (!buffer) {
> >>  +		dev_err(dev, "Unable to add IIO buffer\n");
> >>  +		return -ENOMEM;
> >>  +	}
> >>  +	iio_device_attach_buffer(iio_dev, buffer);
> >>  +
> >>   	ret = devm_iio_device_register(dev, iio_dev);
> >>   	if (ret)
> >>   		dev_err(dev, "Unable to register IIO device\n");  
> >   
> 
>
Jonathan Cameron Jan. 18, 2020, 11:15 a.m. UTC | #4
On Mon, 13 Jan 2020 11:59:00 -0300
Paul Cercueil <paul@crapouillou.net> wrote:

> Hi Jonathan,
> 
> 
> Le sam., janv. 11, 2020 at 11:46, Jonathan Cameron 
> <jic23@jic23.retrosnub.co.uk> a écrit :
> > On Sun,  5 Jan 2020 01:16:37 +0100
> > Artur Rojek <contact@artur-rojek.eu> wrote:
> >   
> >>  Implement support for the touchscreen mode found in JZ47xx SoCs ADC.  
> > This needs more description.
> > 
> > Looks like it enables a kfifo and also selects the callback buffer
> > stuff to run with a generic touchscreen iio-> input driver.
> > 
> > A few other bits inline, but basically fine.
> > 
> > I've never really thought about whether we support a CB buffer
> > without anything on the IIO side.   That should be possible,
> > but I'm not sure what odd corner cases will turn up.  I'm guessing
> > there are some, or you'd not have bothered exposing it here?  
> 
> I'm sorry, what do you mean by "nothing on the IIO side"?

Hmm. I thought I replied to this from work yesterday, but
not seeing anything on my personal email.  Oh well.

You currently support an IIO kfifo buffer.  That isn't
actually used in the path to the touchscreen assuming you
are using a callback buffer.   So in theory it might be
nice to drop the IIO side.  However, I'm not sure the
core actually supports that at the moment, or what needs
to change to make it possible.

Jonathan

> 
> 
> > 
> > Thanks
> > 
> > Jonathan
> > 
> >   
> >> 
> >>  Signed-off-by: Artur Rojek <contact@artur-rojek.eu>
> >>  Tested-by: Paul Cercueil <paul@crapouillou.net>
> >>  ---
> >>   drivers/iio/adc/Kconfig       |   3 +
> >>   drivers/iio/adc/ingenic-adc.c | 120 
> >> +++++++++++++++++++++++++++++++++-
> >>   2 files changed, 121 insertions(+), 2 deletions(-)
> >> 
> >>  diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> >>  index 5d8540b7b427..dabbf15032af 100644
> >>  --- a/drivers/iio/adc/Kconfig
> >>  +++ b/drivers/iio/adc/Kconfig
> >>  @@ -446,6 +446,9 @@ config INA2XX_ADC
> >>   config INGENIC_ADC
> >>   	tristate "Ingenic JZ47xx SoCs ADC driver"
> >>   	depends on MIPS || COMPILE_TEST
> >>  +	select IIO_BUFFER
> >>  +	select IIO_BUFFER_CB  
> > 
> > Feels like IIO_BUFFER_CB should be selected by the driver that
> > uses that functionality rather than this one.
> >   
> >>  +	select IIO_KFIFO_BUF
> >>   	help
> >>   	  Say yes here to build support for the Ingenic JZ47xx SoCs ADC 
> >> unit.
> >> 
> >>  diff --git a/drivers/iio/adc/ingenic-adc.c 
> >> b/drivers/iio/adc/ingenic-adc.c
> >>  index 7a24bc1dabe1..4dbf15fdd95d 100644
> >>  --- a/drivers/iio/adc/ingenic-adc.c
> >>  +++ b/drivers/iio/adc/ingenic-adc.c
> >>  @@ -8,7 +8,10 @@
> >> 
> >>   #include <dt-bindings/iio/adc/ingenic,adc.h>
> >>   #include <linux/clk.h>
> >>  +#include <linux/iio/buffer.h>
> >>   #include <linux/iio/iio.h>
> >>  +#include <linux/iio/kfifo_buf.h>
> >>  +#include <linux/interrupt.h>
> >>   #include <linux/io.h>
> >>   #include <linux/iopoll.h>
> >>   #include <linux/kernel.h>
> >>  @@ -20,6 +23,8 @@
> >>   #define JZ_ADC_REG_CFG			0x04
> >>   #define JZ_ADC_REG_CTRL			0x08
> >>   #define JZ_ADC_REG_STATUS		0x0c
> >>  +#define JZ_ADC_REG_ADSAME		0x10
> >>  +#define JZ_ADC_REG_ADWAIT		0x14
> >>   #define JZ_ADC_REG_ADTCH		0x18
> >>   #define JZ_ADC_REG_ADBDAT		0x1c
> >>   #define JZ_ADC_REG_ADSDAT		0x20
> >>  @@ -28,6 +33,9 @@
> >>   #define JZ_ADC_REG_ENABLE_PD		BIT(7)
> >>   #define JZ_ADC_REG_CFG_AUX_MD		(BIT(0) | BIT(1))
> >>   #define JZ_ADC_REG_CFG_BAT_MD		BIT(4)
> >>  +#define JZ_ADC_REG_CFG_PULL_UP(n)	((n) << 16)
> >>  +#define JZ_ADC_REG_CFG_SAMPLE_NUM(n)	((n) << 10)
> >>  +#define JZ_ADC_REG_CFG_TOUCH_OPS_MASK	(BIT(31) | GENMASK(23, 10))
> >>   #define JZ_ADC_REG_ADCLK_CLKDIV_LSB	0
> >>   #define JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB	16
> >>   #define JZ4770_ADC_REG_ADCLK_CLKDIV10US_LSB	8
> >>  @@ -44,6 +52,14 @@
> >>   #define JZ4770_ADC_BATTERY_VREF			6600
> >>   #define JZ4770_ADC_BATTERY_VREF_BITS		12
> >> 
> >>  +#define JZ_ADC_IRQ_AUX			BIT(0)
> >>  +#define JZ_ADC_IRQ_BATTERY		BIT(1)
> >>  +#define JZ_ADC_IRQ_TOUCH		BIT(2)
> >>  +#define JZ_ADC_IRQ_PEN_DOWN		BIT(3)
> >>  +#define JZ_ADC_IRQ_PEN_UP		BIT(4)
> >>  +#define JZ_ADC_IRQ_PEN_DOWN_SLEEP	BIT(5)
> >>  +#define JZ_ADC_IRQ_SLEEP		BIT(7)
> >>  +
> >>   struct ingenic_adc;
> >> 
> >>   struct ingenic_adc_soc_data {
> >>  @@ -411,6 +427,30 @@ static const struct iio_info ingenic_adc_info 
> >> = {
> >>   };
> >> 
> >>   static const struct iio_chan_spec ingenic_channels[] = {
> >>  +	{
> >>  +		.extend_name = "touchscreen_xp",  
> > 
> > Note that adding extended names:
> > 
> > 1) Needs documenting as it create ABI - so something in
> > Documentation/ABI/testing/sysfs-bus-iio-*
> > 
> > 2) Breaks any generic userspace application.
> > 
> > Why can't we use modified and an axis to identify this?  
> 
> I'm in a good place to know that extended names are bad. The problem 
> here is that Xn/Yn channels will be added later (we have a board that 
> has one joystick connected to Xp/Yp, and a second joystick connected to 
> Xn/Yn). I assume that it is not possible to have two channels with the 
> same type and modifier?
> 
> Alternatively I believe we could also have the first two channels as 
> X/Y single-ended, and then two channels as X/Y differential, and do 
> some easy math in the joystick driver, but that would make it pretty 
> hardware-specific.
> 
> Cheers,
> -Paul
> 
> >   
> >>  +		.type = IIO_POSITIONRELATIVE,
> >>  +		.indexed = 1,
> >>  +		.channel = INGENIC_ADC_TOUCH_XP,
> >>  +		.scan_index = 0,
> >>  +		.scan_type = {
> >>  +			.sign = 'u',
> >>  +			.realbits = 12,
> >>  +			.storagebits = 16
> >>  +		},
> >>  +	},
> >>  +	{
> >>  +		.extend_name = "touchscreen_yp",
> >>  +		.type = IIO_POSITIONRELATIVE,
> >>  +		.indexed = 1,
> >>  +		.channel = INGENIC_ADC_TOUCH_YP,
> >>  +		.scan_index = 1,
> >>  +		.scan_type = {
> >>  +			.sign = 'u',
> >>  +			.realbits = 12,
> >>  +			.storagebits = 16
> >>  +		},
> >>  +	},
> >>   	{
> >>   		.extend_name = "aux",
> >>   		.type = IIO_VOLTAGE,
> >>  @@ -418,6 +458,7 @@ static const struct iio_chan_spec 
> >> ingenic_channels[] = {
> >>   				      BIT(IIO_CHAN_INFO_SCALE),
> >>   		.indexed = 1,
> >>   		.channel = INGENIC_ADC_AUX,
> >>  +		.scan_index = -1
> >>   	},
> >>   	{
> >>   		.extend_name = "battery",
> >>  @@ -428,6 +469,7 @@ static const struct iio_chan_spec 
> >> ingenic_channels[] = {
> >>   						BIT(IIO_CHAN_INFO_SCALE),
> >>   		.indexed = 1,
> >>   		.channel = INGENIC_ADC_BATTERY,
> >>  +		.scan_index = -1
> >>   	},
> >>   	{ /* Must always be last in the array. */
> >>   		.extend_name = "aux2",
> >>  @@ -436,16 +478,70 @@ static const struct iio_chan_spec 
> >> ingenic_channels[] = {
> >>   				      BIT(IIO_CHAN_INFO_SCALE),
> >>   		.indexed = 1,
> >>   		.channel = INGENIC_ADC_AUX2,
> >>  +		.scan_index = -1
> >>   	},
> >>   };
> >> 
> >>  +static int ingenic_adc_buffer_enable(struct iio_dev *iio_dev)
> >>  +{
> >>  +	struct ingenic_adc *adc = iio_priv(iio_dev);
> >>  +
> >>  +	clk_enable(adc->clk);
> >>  +	/* It takes significant time for the touchscreen hw to stabilize. 
> >> */
> >>  +	msleep(50);
> >>  +	ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK,
> >>  +			       JZ_ADC_REG_CFG_SAMPLE_NUM(4) |
> >>  +			       JZ_ADC_REG_CFG_PULL_UP(4));
> >>  +	writew(80, adc->base + JZ_ADC_REG_ADWAIT);
> >>  +	writew(2, adc->base + JZ_ADC_REG_ADSAME);
> >>  +	writeb((u8)~JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_CTRL);
> >>  +	writel(0, adc->base + JZ_ADC_REG_ADTCH);
> >>  +	ingenic_adc_enable(adc, 2, true);
> >>  +
> >>  +	return 0;
> >>  +}
> >>  +
> >>  +static int ingenic_adc_buffer_disable(struct iio_dev *iio_dev)
> >>  +{
> >>  +	struct ingenic_adc *adc = iio_priv(iio_dev);
> >>  +
> >>  +	ingenic_adc_enable(adc, 2, false);
> >>  +	writeb(0xff, adc->base + JZ_ADC_REG_CTRL);
> >>  +	writeb(0xff, adc->base + JZ_ADC_REG_STATUS);
> >>  +	ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK, 0);
> >>  +	writew(0, adc->base + JZ_ADC_REG_ADSAME);
> >>  +	writew(0, adc->base + JZ_ADC_REG_ADWAIT);
> >>  +	clk_disable(adc->clk);
> >>  +
> >>  +	return 0;
> >>  +}
> >>  +
> >>  +static const struct iio_buffer_setup_ops ingenic_buffer_setup_ops 
> >> = {
> >>  +	.postenable = &ingenic_adc_buffer_enable,
> >>  +	.predisable = &ingenic_adc_buffer_disable
> >>  +};
> >>  +
> >>  +static irqreturn_t ingenic_adc_irq(int irq, void *data)
> >>  +{
> >>  +	struct iio_dev *iio_dev = data;
> >>  +	struct ingenic_adc *adc = iio_priv(iio_dev);
> >>  +	u32 tdat;
> >>  +
> >>  +	tdat = readl(adc->base + JZ_ADC_REG_ADTCH);
> >>  +	iio_push_to_buffers(iio_dev, &tdat);
> >>  +	writeb(JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_STATUS);
> >>  +
> >>  +	return IRQ_HANDLED;
> >>  +}
> >>  +
> >>   static int ingenic_adc_probe(struct platform_device *pdev)
> >>   {
> >>   	struct device *dev = &pdev->dev;
> >>   	struct iio_dev *iio_dev;
> >>   	struct ingenic_adc *adc;
> >>   	const struct ingenic_adc_soc_data *soc_data;
> >>  -	int ret;
> >>  +	struct iio_buffer *buffer;
> >>  +	int irq, ret;
> >> 
> >>   	soc_data = device_get_match_data(dev);
> >>   	if (!soc_data)
> >>  @@ -460,6 +556,18 @@ static int ingenic_adc_probe(struct 
> >> platform_device *pdev)
> >>   	mutex_init(&adc->aux_lock);
> >>   	adc->soc_data = soc_data;
> >> 
> >>  +	irq = platform_get_irq(pdev, 0);
> >>  +	if (irq < 0) {
> >>  +		dev_err(dev, "Failed to get irq: %d\n", irq);
> >>  +		return irq;
> >>  +	}
> >>  +	ret = devm_request_irq(dev, irq, ingenic_adc_irq, 0,
> >>  +			       dev_name(dev), iio_dev);
> >>  +	if (ret < 0) {
> >>  +		dev_err(dev, "Failed to request irq: %d\n", ret);
> >>  +		return ret;
> >>  +	}
> >>  +
> >>   	adc->base = devm_platform_ioremap_resource(pdev, 0);
> >>   	if (IS_ERR(adc->base))
> >>   		return PTR_ERR(adc->base);
> >>  @@ -499,7 +607,8 @@ static int ingenic_adc_probe(struct 
> >> platform_device *pdev)
> >> 
> >>   	iio_dev->dev.parent = dev;
> >>   	iio_dev->name = "jz-adc";
> >>  -	iio_dev->modes = INDIO_DIRECT_MODE;
> >>  +	iio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
> >>  +	iio_dev->setup_ops = &ingenic_buffer_setup_ops;
> >>   	iio_dev->channels = ingenic_channels;
> >>   	iio_dev->num_channels = ARRAY_SIZE(ingenic_channels);
> >>   	/* Remove AUX2 from the list of supported channels. */
> >>  @@ -507,6 +616,13 @@ static int ingenic_adc_probe(struct 
> >> platform_device *pdev)
> >>   		iio_dev->num_channels -= 1;
> >>   	iio_dev->info = &ingenic_adc_info;
> >> 
> >>  +	buffer = devm_iio_kfifo_allocate(dev);
> >>  +	if (!buffer) {
> >>  +		dev_err(dev, "Unable to add IIO buffer\n");
> >>  +		return -ENOMEM;
> >>  +	}
> >>  +	iio_device_attach_buffer(iio_dev, buffer);
> >>  +
> >>   	ret = devm_iio_device_register(dev, iio_dev);
> >>   	if (ret)
> >>   		dev_err(dev, "Unable to register IIO device\n");  
> >   
> 
>
diff mbox series

Patch

diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 5d8540b7b427..dabbf15032af 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -446,6 +446,9 @@  config INA2XX_ADC
 config INGENIC_ADC
 	tristate "Ingenic JZ47xx SoCs ADC driver"
 	depends on MIPS || COMPILE_TEST
+	select IIO_BUFFER
+	select IIO_BUFFER_CB
+	select IIO_KFIFO_BUF
 	help
 	  Say yes here to build support for the Ingenic JZ47xx SoCs ADC unit.
 
diff --git a/drivers/iio/adc/ingenic-adc.c b/drivers/iio/adc/ingenic-adc.c
index 7a24bc1dabe1..4dbf15fdd95d 100644
--- a/drivers/iio/adc/ingenic-adc.c
+++ b/drivers/iio/adc/ingenic-adc.c
@@ -8,7 +8,10 @@ 
 
 #include <dt-bindings/iio/adc/ingenic,adc.h>
 #include <linux/clk.h>
+#include <linux/iio/buffer.h>
 #include <linux/iio/iio.h>
+#include <linux/iio/kfifo_buf.h>
+#include <linux/interrupt.h>
 #include <linux/io.h>
 #include <linux/iopoll.h>
 #include <linux/kernel.h>
@@ -20,6 +23,8 @@ 
 #define JZ_ADC_REG_CFG			0x04
 #define JZ_ADC_REG_CTRL			0x08
 #define JZ_ADC_REG_STATUS		0x0c
+#define JZ_ADC_REG_ADSAME		0x10
+#define JZ_ADC_REG_ADWAIT		0x14
 #define JZ_ADC_REG_ADTCH		0x18
 #define JZ_ADC_REG_ADBDAT		0x1c
 #define JZ_ADC_REG_ADSDAT		0x20
@@ -28,6 +33,9 @@ 
 #define JZ_ADC_REG_ENABLE_PD		BIT(7)
 #define JZ_ADC_REG_CFG_AUX_MD		(BIT(0) | BIT(1))
 #define JZ_ADC_REG_CFG_BAT_MD		BIT(4)
+#define JZ_ADC_REG_CFG_PULL_UP(n)	((n) << 16)
+#define JZ_ADC_REG_CFG_SAMPLE_NUM(n)	((n) << 10)
+#define JZ_ADC_REG_CFG_TOUCH_OPS_MASK	(BIT(31) | GENMASK(23, 10))
 #define JZ_ADC_REG_ADCLK_CLKDIV_LSB	0
 #define JZ4725B_ADC_REG_ADCLK_CLKDIV10US_LSB	16
 #define JZ4770_ADC_REG_ADCLK_CLKDIV10US_LSB	8
@@ -44,6 +52,14 @@ 
 #define JZ4770_ADC_BATTERY_VREF			6600
 #define JZ4770_ADC_BATTERY_VREF_BITS		12
 
+#define JZ_ADC_IRQ_AUX			BIT(0)
+#define JZ_ADC_IRQ_BATTERY		BIT(1)
+#define JZ_ADC_IRQ_TOUCH		BIT(2)
+#define JZ_ADC_IRQ_PEN_DOWN		BIT(3)
+#define JZ_ADC_IRQ_PEN_UP		BIT(4)
+#define JZ_ADC_IRQ_PEN_DOWN_SLEEP	BIT(5)
+#define JZ_ADC_IRQ_SLEEP		BIT(7)
+
 struct ingenic_adc;
 
 struct ingenic_adc_soc_data {
@@ -411,6 +427,30 @@  static const struct iio_info ingenic_adc_info = {
 };
 
 static const struct iio_chan_spec ingenic_channels[] = {
+	{
+		.extend_name = "touchscreen_xp",
+		.type = IIO_POSITIONRELATIVE,
+		.indexed = 1,
+		.channel = INGENIC_ADC_TOUCH_XP,
+		.scan_index = 0,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16
+		},
+	},
+	{
+		.extend_name = "touchscreen_yp",
+		.type = IIO_POSITIONRELATIVE,
+		.indexed = 1,
+		.channel = INGENIC_ADC_TOUCH_YP,
+		.scan_index = 1,
+		.scan_type = {
+			.sign = 'u',
+			.realbits = 12,
+			.storagebits = 16
+		},
+	},
 	{
 		.extend_name = "aux",
 		.type = IIO_VOLTAGE,
@@ -418,6 +458,7 @@  static const struct iio_chan_spec ingenic_channels[] = {
 				      BIT(IIO_CHAN_INFO_SCALE),
 		.indexed = 1,
 		.channel = INGENIC_ADC_AUX,
+		.scan_index = -1
 	},
 	{
 		.extend_name = "battery",
@@ -428,6 +469,7 @@  static const struct iio_chan_spec ingenic_channels[] = {
 						BIT(IIO_CHAN_INFO_SCALE),
 		.indexed = 1,
 		.channel = INGENIC_ADC_BATTERY,
+		.scan_index = -1
 	},
 	{ /* Must always be last in the array. */
 		.extend_name = "aux2",
@@ -436,16 +478,70 @@  static const struct iio_chan_spec ingenic_channels[] = {
 				      BIT(IIO_CHAN_INFO_SCALE),
 		.indexed = 1,
 		.channel = INGENIC_ADC_AUX2,
+		.scan_index = -1
 	},
 };
 
+static int ingenic_adc_buffer_enable(struct iio_dev *iio_dev)
+{
+	struct ingenic_adc *adc = iio_priv(iio_dev);
+
+	clk_enable(adc->clk);
+	/* It takes significant time for the touchscreen hw to stabilize. */
+	msleep(50);
+	ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK,
+			       JZ_ADC_REG_CFG_SAMPLE_NUM(4) |
+			       JZ_ADC_REG_CFG_PULL_UP(4));
+	writew(80, adc->base + JZ_ADC_REG_ADWAIT);
+	writew(2, adc->base + JZ_ADC_REG_ADSAME);
+	writeb((u8)~JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_CTRL);
+	writel(0, adc->base + JZ_ADC_REG_ADTCH);
+	ingenic_adc_enable(adc, 2, true);
+
+	return 0;
+}
+
+static int ingenic_adc_buffer_disable(struct iio_dev *iio_dev)
+{
+	struct ingenic_adc *adc = iio_priv(iio_dev);
+
+	ingenic_adc_enable(adc, 2, false);
+	writeb(0xff, adc->base + JZ_ADC_REG_CTRL);
+	writeb(0xff, adc->base + JZ_ADC_REG_STATUS);
+	ingenic_adc_set_config(adc, JZ_ADC_REG_CFG_TOUCH_OPS_MASK, 0);
+	writew(0, adc->base + JZ_ADC_REG_ADSAME);
+	writew(0, adc->base + JZ_ADC_REG_ADWAIT);
+	clk_disable(adc->clk);
+
+	return 0;
+}
+
+static const struct iio_buffer_setup_ops ingenic_buffer_setup_ops = {
+	.postenable = &ingenic_adc_buffer_enable,
+	.predisable = &ingenic_adc_buffer_disable
+};
+
+static irqreturn_t ingenic_adc_irq(int irq, void *data)
+{
+	struct iio_dev *iio_dev = data;
+	struct ingenic_adc *adc = iio_priv(iio_dev);
+	u32 tdat;
+
+	tdat = readl(adc->base + JZ_ADC_REG_ADTCH);
+	iio_push_to_buffers(iio_dev, &tdat);
+	writeb(JZ_ADC_IRQ_TOUCH, adc->base + JZ_ADC_REG_STATUS);
+
+	return IRQ_HANDLED;
+}
+
 static int ingenic_adc_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct iio_dev *iio_dev;
 	struct ingenic_adc *adc;
 	const struct ingenic_adc_soc_data *soc_data;
-	int ret;
+	struct iio_buffer *buffer;
+	int irq, ret;
 
 	soc_data = device_get_match_data(dev);
 	if (!soc_data)
@@ -460,6 +556,18 @@  static int ingenic_adc_probe(struct platform_device *pdev)
 	mutex_init(&adc->aux_lock);
 	adc->soc_data = soc_data;
 
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "Failed to get irq: %d\n", irq);
+		return irq;
+	}
+	ret = devm_request_irq(dev, irq, ingenic_adc_irq, 0,
+			       dev_name(dev), iio_dev);
+	if (ret < 0) {
+		dev_err(dev, "Failed to request irq: %d\n", ret);
+		return ret;
+	}
+
 	adc->base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(adc->base))
 		return PTR_ERR(adc->base);
@@ -499,7 +607,8 @@  static int ingenic_adc_probe(struct platform_device *pdev)
 
 	iio_dev->dev.parent = dev;
 	iio_dev->name = "jz-adc";
-	iio_dev->modes = INDIO_DIRECT_MODE;
+	iio_dev->modes = INDIO_DIRECT_MODE | INDIO_BUFFER_SOFTWARE;
+	iio_dev->setup_ops = &ingenic_buffer_setup_ops;
 	iio_dev->channels = ingenic_channels;
 	iio_dev->num_channels = ARRAY_SIZE(ingenic_channels);
 	/* Remove AUX2 from the list of supported channels. */
@@ -507,6 +616,13 @@  static int ingenic_adc_probe(struct platform_device *pdev)
 		iio_dev->num_channels -= 1;
 	iio_dev->info = &ingenic_adc_info;
 
+	buffer = devm_iio_kfifo_allocate(dev);
+	if (!buffer) {
+		dev_err(dev, "Unable to add IIO buffer\n");
+		return -ENOMEM;
+	}
+	iio_device_attach_buffer(iio_dev, buffer);
+
 	ret = devm_iio_device_register(dev, iio_dev);
 	if (ret)
 		dev_err(dev, "Unable to register IIO device\n");