@@ -15,7 +15,7 @@
/*
* Array of DSP commands
*/
-static struct vx_cmd_info vx_dsp_cmds[] = {
+static const struct vx_cmd_info vx_dsp_cmds[] = {
[CMD_VERSION] = { 0x010000, 2, RMH_SSIZE_FIXED, 1 },
[CMD_SUPPORTED] = { 0x020000, 1, RMH_SSIZE_FIXED, 2 },
[CMD_TEST_IT] = { 0x040000, 1, RMH_SSIZE_FIXED, 1 },
@@ -39,7 +39,7 @@ MODULE_LICENSE("GPL");
int snd_vx_check_reg_bit(struct vx_core *chip, int reg, int mask, int bit, int time)
{
unsigned long end_time = jiffies + (time * HZ + 999) / 1000;
- static char *reg_names[VX_REG_MAX] = {
+ static const char * const reg_names[VX_REG_MAX] = {
"ICR", "CVR", "ISR", "IVR", "RXH", "RXM", "RXL",
"DMA", "CDSP", "RFREQ", "RUER/V2", "DATA", "MEMIRQ",
"ACQ", "BIT0", "BIT1", "MIC0", "MIC1", "MIC2",
@@ -588,11 +588,11 @@ static void vx_reset_board(struct vx_core *chip, int cold_reset)
static void vx_proc_read(struct snd_info_entry *entry, struct snd_info_buffer *buffer)
{
struct vx_core *chip = entry->private_data;
- static char *audio_src_vxp[] = { "Line", "Mic", "Digital" };
- static char *audio_src_vx2[] = { "Analog", "Analog", "Digital" };
- static char *clock_mode[] = { "Auto", "Internal", "External" };
- static char *clock_src[] = { "Internal", "External" };
- static char *uer_type[] = { "Consumer", "Professional", "Not Present" };
+ static const char * const audio_src_vxp[] = { "Line", "Mic", "Digital" };
+ static const char * const audio_src_vx2[] = { "Analog", "Analog", "Digital" };
+ static const char * const clock_mode[] = { "Auto", "Internal", "External" };
+ static const char * const clock_src[] = { "Internal", "External" };
+ static const char * const uer_type[] = { "Consumer", "Professional", "Not Present" };
snd_iprintf(buffer, "%s\n", chip->card->longname);
snd_iprintf(buffer, "Xilinx Firmware: %s\n",
@@ -32,7 +32,7 @@ MODULE_FIRMWARE("vx/l_1_vp4.d56");
int snd_vx_setup_firmware(struct vx_core *chip)
{
- static char *fw_files[VX_TYPE_NUMS][4] = {
+ static const char * const fw_files[VX_TYPE_NUMS][4] = {
[VX_TYPE_BOARD] = {
NULL, "x1_1_vx2.xlx", "bd56002.boot", "l_1_vx2.d56",
},
@@ -961,7 +961,7 @@ int snd_vx_mixer_new(struct vx_core *chip)
return err;
/* VU, peak, saturation meters */
for (c = 0; c < 2; c++) {
- static char *dir[2] = { "Output", "Input" };
+ static const char * const dir[2] = { "Output", "Input" };
for (i = 0; i < chip->hw->num_ins; i++) {
int val = (i * 2) | (c << 8);
if (c == 1) {
@@ -19,7 +19,7 @@
#include "vx222.h"
-static int vx2_reg_offset[VX_REG_MAX] = {
+static const int vx2_reg_offset[VX_REG_MAX] = {
[VX_ICR] = 0x00,
[VX_CVR] = 0x04,
[VX_ISR] = 0x08,
@@ -45,7 +45,7 @@ static int vx2_reg_offset[VX_REG_MAX] = {
[VX_GPIOC] = 0x54, // VX_GPIOC (new with PLX9030)
};
-static int vx2_reg_index[VX_REG_MAX] = {
+static const int vx2_reg_index[VX_REG_MAX] = {
[VX_ICR] = 1,
[VX_CVR] = 1,
[VX_ISR] = 1,
@@ -15,7 +15,7 @@
#include "vxpocket.h"
-static int vxp_reg_offset[VX_REG_MAX] = {
+static const int vxp_reg_offset[VX_REG_MAX] = {
[VX_ICR] = 0x00, // ICR
[VX_CVR] = 0x01, // CVR
[VX_ISR] = 0x02, // ISR
Apply const prefix to every possible place: the static tables for DSP commands, the string tables, and register/offset tables. Just for minor optimization and no functional changes. Signed-off-by: Takashi Iwai <tiwai@suse.de> --- sound/drivers/vx/vx_cmd.c | 2 +- sound/drivers/vx/vx_core.c | 12 ++++++------ sound/drivers/vx/vx_hwdep.c | 2 +- sound/drivers/vx/vx_mixer.c | 2 +- sound/pci/vx222/vx222_ops.c | 4 ++-- sound/pcmcia/vx/vxp_ops.c | 2 +- 6 files changed, 12 insertions(+), 12 deletions(-)