drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model
diff mbox series

Message ID 20200107070113.28951-1-wens@kernel.org
State Mainlined
Commit 4396393fb96449c56423fb4b351f76e45a6bcaf6
Headers show
Series
  • drm/sun4i: tcon: Set RGB DCLK min. divider based on hardware model
Related show

Commit Message

Chen-Yu Tsai Jan. 7, 2020, 7:01 a.m. UTC
From: Chen-Yu Tsai <wens@csie.org>

In commit 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK
to 1.") it was assumed that all TCON variants support a minimum divider
of 1 if only DCLK was used.

However, the oldest generation of hardware only supports minimum divider
of 4 if only DCLK is used. If a divider of 1 was used on this old
hardware, some scrolling artifact would appear. A divider of 2 seemed
OK, but a divider of 3 had artifacts as well.

Set the minimum divider when outputing to parallel RGB based on the
hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20)
hardware, and a minimum of 1 for the rest. A value is not set for the
TCON variants lacking channel 0.

This fixes the scrolling artifacts seen on my A13 tablet.

Fixes: 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.")
Cc: <stable@vger.kernel.org> # 5.4.x
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 drivers/gpu/drm/sun4i/sun4i_tcon.c | 15 ++++++++++++---
 drivers/gpu/drm/sun4i/sun4i_tcon.h |  1 +
 2 files changed, 13 insertions(+), 3 deletions(-)

Comments

Maxime Ripard Jan. 7, 2020, 3:06 p.m. UTC | #1
On Tue, Jan 07, 2020 at 03:01:13PM +0800, Chen-Yu Tsai wrote:
> From: Chen-Yu Tsai <wens@csie.org>
>
> In commit 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK
> to 1.") it was assumed that all TCON variants support a minimum divider
> of 1 if only DCLK was used.
>
> However, the oldest generation of hardware only supports minimum divider
> of 4 if only DCLK is used. If a divider of 1 was used on this old
> hardware, some scrolling artifact would appear. A divider of 2 seemed
> OK, but a divider of 3 had artifacts as well.
>
> Set the minimum divider when outputing to parallel RGB based on the
> hardware model, with a minimum of 4 for the oldest (A10/A10s/A13/A20)
> hardware, and a minimum of 1 for the rest. A value is not set for the
> TCON variants lacking channel 0.
>
> This fixes the scrolling artifacts seen on my A13 tablet.
>
> Fixes: 0b8e7bbde5e7 ("drm/sun4i: tcon: Set min division of TCON0_DCLK to 1.")
> Cc: <stable@vger.kernel.org> # 5.4.x
> Signed-off-by: Chen-Yu Tsai <wens@csie.org>

Applied, thanks

Maxime

Patch
diff mbox series

diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.c b/drivers/gpu/drm/sun4i/sun4i_tcon.c
index 42651d737c55..c81cdce6ed55 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.c
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.c
@@ -489,7 +489,7 @@  static void sun4i_tcon0_mode_set_rgb(struct sun4i_tcon *tcon,
 
 	WARN_ON(!tcon->quirks->has_channel_0);
 
-	tcon->dclk_min_div = 1;
+	tcon->dclk_min_div = tcon->quirks->dclk_min_div;
 	tcon->dclk_max_div = 127;
 	sun4i_tcon0_mode_set_common(tcon, mode);
 
@@ -1426,12 +1426,14 @@  static int sun8i_r40_tcon_tv_set_mux(struct sun4i_tcon *tcon,
 static const struct sun4i_tcon_quirks sun4i_a10_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
+	.dclk_min_div		= 4,
 	.set_mux		= sun4i_a10_tcon_set_mux,
 };
 
 static const struct sun4i_tcon_quirks sun5i_a13_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
+	.dclk_min_div		= 4,
 	.set_mux		= sun5i_a13_tcon_set_mux,
 };
 
@@ -1440,6 +1442,7 @@  static const struct sun4i_tcon_quirks sun6i_a31_quirks = {
 	.has_channel_1		= true,
 	.has_lvds_alt		= true,
 	.needs_de_be_mux	= true,
+	.dclk_min_div		= 1,
 	.set_mux		= sun6i_tcon_set_mux,
 };
 
@@ -1447,11 +1450,13 @@  static const struct sun4i_tcon_quirks sun6i_a31s_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
 	.needs_de_be_mux	= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun7i_a20_quirks = {
 	.has_channel_0		= true,
 	.has_channel_1		= true,
+	.dclk_min_div		= 4,
 	/* Same display pipeline structure as A10 */
 	.set_mux		= sun4i_a10_tcon_set_mux,
 };
@@ -1459,11 +1464,13 @@  static const struct sun4i_tcon_quirks sun7i_a20_quirks = {
 static const struct sun4i_tcon_quirks sun8i_a33_quirks = {
 	.has_channel_0		= true,
 	.has_lvds_alt		= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun8i_a83t_lcd_quirks = {
 	.supports_lvds		= true,
 	.has_channel_0		= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun8i_a83t_tv_quirks = {
@@ -1477,11 +1484,13 @@  static const struct sun4i_tcon_quirks sun8i_r40_tv_quirks = {
 
 static const struct sun4i_tcon_quirks sun8i_v3s_quirks = {
 	.has_channel_0		= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun9i_a80_tcon_lcd_quirks = {
-	.has_channel_0	= true,
-	.needs_edp_reset = true,
+	.has_channel_0		= true,
+	.needs_edp_reset	= true,
+	.dclk_min_div		= 1,
 };
 
 static const struct sun4i_tcon_quirks sun9i_a80_tcon_tv_quirks = {
diff --git a/drivers/gpu/drm/sun4i/sun4i_tcon.h b/drivers/gpu/drm/sun4i/sun4i_tcon.h
index f9f1fe80b206..a62ec826ae71 100644
--- a/drivers/gpu/drm/sun4i/sun4i_tcon.h
+++ b/drivers/gpu/drm/sun4i/sun4i_tcon.h
@@ -224,6 +224,7 @@  struct sun4i_tcon_quirks {
 	bool	needs_de_be_mux; /* sun6i needs mux to select backend */
 	bool    needs_edp_reset; /* a80 edp reset needed for tcon0 access */
 	bool	supports_lvds;   /* Does the TCON support an LVDS output? */
+	u8	dclk_min_div;	/* minimum divider for TCON0 DCLK */
 
 	/* callback to handle tcon muxing options */
 	int	(*set_mux)(struct sun4i_tcon *, const struct drm_encoder *);