Message ID | 20200108052337.65916-8-drinkcat@chromium.org (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | Add dts for mt8183 GPU (and misc panfrost patches) | expand |
On Tue, Jan 7, 2020 at 11:24 PM Nicolas Boichat <drinkcat@chromium.org> wrote: > > The Bifrost GPU on MT8183 uses 2 regulators (core and SRAM) for > devfreq, and provides OPP table with 2 sets of voltages. > > TODO: This is incomplete as we'll need add support for setting > a pair of voltages as well. > > Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> > --- > drivers/gpu/drm/panfrost/panfrost_devfreq.c | 18 ++++++++++++++++++ > drivers/gpu/drm/panfrost/panfrost_device.h | 2 ++ > 2 files changed, 20 insertions(+) > > diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c > index 413987038fbfccb..5eb0effded7eb09 100644 > --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c > +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c > @@ -79,6 +79,22 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev) > struct devfreq *devfreq; > struct thermal_cooling_device *cooling; > > + /* If we have 2 regulator, we need an OPP table with 2 voltages. */ > + if (pfdev->regulator_sram) { > + const char * const reg_names[] = { "mali", "sram" }; > + > + pfdev->devfreq.dev_opp_table = > + dev_pm_opp_set_regulators(dev, > + reg_names, ARRAY_SIZE(reg_names)); > + if (IS_ERR(pfdev->devfreq.dev_opp_table)) { > + ret = PTR_ERR(pfdev->devfreq.dev_opp_table); > + pfdev->devfreq.dev_opp_table = NULL; > + dev_err(dev, > + "Failed to init devfreq opp table: %d\n", ret); > + return ret; > + } > + } > + > ret = dev_pm_opp_of_add_table(dev); > if (ret == -ENODEV) /* Optional, continue without devfreq */ > return 0; > @@ -119,6 +135,8 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev) > if (pfdev->devfreq.cooling) > devfreq_cooling_unregister(pfdev->devfreq.cooling); > dev_pm_opp_of_remove_table(&pfdev->pdev->dev); > + if (pfdev->devfreq.dev_opp_table) > + dev_pm_opp_put_regulators(pfdev->devfreq.dev_opp_table); > } > > void panfrost_devfreq_resume(struct panfrost_device *pfdev) > diff --git a/drivers/gpu/drm/panfrost/panfrost_device.h b/drivers/gpu/drm/panfrost/panfrost_device.h > index 92d471676fc7823..581da3fe5df8b17 100644 > --- a/drivers/gpu/drm/panfrost/panfrost_device.h > +++ b/drivers/gpu/drm/panfrost/panfrost_device.h > @@ -91,10 +91,12 @@ struct panfrost_device { > struct { > struct devfreq *devfreq; > struct thermal_cooling_device *cooling; > + struct opp_table *dev_opp_table; > ktime_t busy_time; > ktime_t idle_time; > ktime_t time_last_update; > atomic_t busy_count; > + struct panfrost_devfreq_slot slot[NUM_JOB_SLOTS]; ?? Left over from some rebase? Rob
On Thu, Jan 9, 2020 at 4:09 AM Rob Herring <robh+dt@kernel.org> wrote: > [snip] > > void panfrost_devfreq_resume(struct panfrost_device *pfdev) > > diff --git a/drivers/gpu/drm/panfrost/panfrost_device.h b/drivers/gpu/drm/panfrost/panfrost_device.h > > index 92d471676fc7823..581da3fe5df8b17 100644 > > --- a/drivers/gpu/drm/panfrost/panfrost_device.h > > +++ b/drivers/gpu/drm/panfrost/panfrost_device.h > > @@ -91,10 +91,12 @@ struct panfrost_device { > > struct { > > struct devfreq *devfreq; > > struct thermal_cooling_device *cooling; > > + struct opp_table *dev_opp_table; > > ktime_t busy_time; > > ktime_t idle_time; > > ktime_t time_last_update; > > atomic_t busy_count; > > + struct panfrost_devfreq_slot slot[NUM_JOB_SLOTS]; > > ?? Left over from some rebase? Oh, yes, sorry.
diff --git a/drivers/gpu/drm/panfrost/panfrost_devfreq.c b/drivers/gpu/drm/panfrost/panfrost_devfreq.c index 413987038fbfccb..5eb0effded7eb09 100644 --- a/drivers/gpu/drm/panfrost/panfrost_devfreq.c +++ b/drivers/gpu/drm/panfrost/panfrost_devfreq.c @@ -79,6 +79,22 @@ int panfrost_devfreq_init(struct panfrost_device *pfdev) struct devfreq *devfreq; struct thermal_cooling_device *cooling; + /* If we have 2 regulator, we need an OPP table with 2 voltages. */ + if (pfdev->regulator_sram) { + const char * const reg_names[] = { "mali", "sram" }; + + pfdev->devfreq.dev_opp_table = + dev_pm_opp_set_regulators(dev, + reg_names, ARRAY_SIZE(reg_names)); + if (IS_ERR(pfdev->devfreq.dev_opp_table)) { + ret = PTR_ERR(pfdev->devfreq.dev_opp_table); + pfdev->devfreq.dev_opp_table = NULL; + dev_err(dev, + "Failed to init devfreq opp table: %d\n", ret); + return ret; + } + } + ret = dev_pm_opp_of_add_table(dev); if (ret == -ENODEV) /* Optional, continue without devfreq */ return 0; @@ -119,6 +135,8 @@ void panfrost_devfreq_fini(struct panfrost_device *pfdev) if (pfdev->devfreq.cooling) devfreq_cooling_unregister(pfdev->devfreq.cooling); dev_pm_opp_of_remove_table(&pfdev->pdev->dev); + if (pfdev->devfreq.dev_opp_table) + dev_pm_opp_put_regulators(pfdev->devfreq.dev_opp_table); } void panfrost_devfreq_resume(struct panfrost_device *pfdev) diff --git a/drivers/gpu/drm/panfrost/panfrost_device.h b/drivers/gpu/drm/panfrost/panfrost_device.h index 92d471676fc7823..581da3fe5df8b17 100644 --- a/drivers/gpu/drm/panfrost/panfrost_device.h +++ b/drivers/gpu/drm/panfrost/panfrost_device.h @@ -91,10 +91,12 @@ struct panfrost_device { struct { struct devfreq *devfreq; struct thermal_cooling_device *cooling; + struct opp_table *dev_opp_table; ktime_t busy_time; ktime_t idle_time; ktime_t time_last_update; atomic_t busy_count; + struct panfrost_devfreq_slot slot[NUM_JOB_SLOTS]; } devfreq; };
The Bifrost GPU on MT8183 uses 2 regulators (core and SRAM) for devfreq, and provides OPP table with 2 sets of voltages. TODO: This is incomplete as we'll need add support for setting a pair of voltages as well. Signed-off-by: Nicolas Boichat <drinkcat@chromium.org> --- drivers/gpu/drm/panfrost/panfrost_devfreq.c | 18 ++++++++++++++++++ drivers/gpu/drm/panfrost/panfrost_device.h | 2 ++ 2 files changed, 20 insertions(+)