[RFC,v1,09/10] arm64: dts: rockchip: add nandc node for rk3368
diff mbox series

Message ID 20200108205338.11369-10-jbx6244@gmail.com
State New
Headers show
Series
  • Enable RK3066 NANDC for MK808
Related show

Commit Message

Johan Jonker Jan. 8, 2020, 8:53 p.m. UTC
From: Zhaoyifeng <zyf@rock-chips.com>

Add nandc node for rk3368.

Signed-off-by: Zhaoyifeng <zyf@rock-chips.com>
Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 arch/arm64/boot/dts/rockchip/rk3368.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/rockchip/rk3368.dtsi b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
index fd8618801..7dff2e221 100644
--- a/arch/arm64/boot/dts/rockchip/rk3368.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3368.dtsi
@@ -25,6 +25,7 @@ 
 		i2c3 = &i2c3;
 		i2c4 = &i2c4;
 		i2c5 = &i2c5;
+		nandc0 = &nandc0;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;
@@ -508,6 +509,17 @@ 
 		status = "disabled";
 	};
 
+	nandc0: nand-controller@ff400000 {
+		compatible = "rockchip,nandc-v6";
+		reg = <0x0 0xff400000 0x0 0x4000>;
+		interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru SCLK_NANDC0>, <&cru HCLK_NANDC0>;
+		clock-names = "clk_nandc", "hclk_nandc";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		status = "disabled";
+	};
+
 	usb_host0_ehci: usb@ff500000 {
 		compatible = "generic-ehci";
 		reg = <0x0 0xff500000 0x0 0x100>;