[PULL,1/5] usb-host: remove 'remote wakeup' flag from configuration descriptor

Commit Message

Gerd Hoffmann Jan. 13, 2020, 1:06 p.m. UTC

From: Yuri Benditovich <[e-mail]>

If the redirected device has this capability, Windows guest may
place the device into D2 and expect it to wake when the device
becomes active, but this will never happen. For example, when
internal Bluetooth adapter is redirected, keyboards and mice
connected to it do not work. Current commit removes this
capability (starting from machine 5.0)
Set 'usb-host.suppress-remote-wake' property to 'off' to keep
'remote wake' as is or to 'on' to remove 'remote wake' on
4.2 or earlier.

Signed-off-by: Yuri Benditovich <[e-mail]>
Message-id: [e-mail]
Signed-off-by: Gerd Hoffmann <[e-mail]>
---
 hw/core/machine.c    |  1 +
 hw/usb/host-libusb.c | 20 ++++++++++++++++++++
 hw/usb/trace-events  |  1 +
 3 files changed, 22 insertions(+)

Patch

diff --git a/hw/core/machine.c b/hw/core/machine.c
index 4f30fb56463c..c5d32f56db93 100644
--- a/hw/core/machine.c
+++ b/hw/core/machine.c
@@ -32,6 +32,7 @@  GlobalProperty hw_compat_4_2[] = {
     { "virtio-blk-device", "seg-max-adjust", "off"},
     { "virtio-scsi-device", "seg_max_adjust", "off"},
     { "vhost-blk-device", "seg_max_adjust", "off"},
+    { "usb-host", "suppress-remote-wake", "off" },
 };
 const size_t hw_compat_4_2_len = G_N_ELEMENTS(hw_compat_4_2);
 
diff --git a/hw/usb/host-libusb.c b/hw/usb/host-libusb.c
index fcf48c019333..00e0e3636978 100644
--- a/hw/usb/host-libusb.c
+++ b/hw/usb/host-libusb.c
@@ -88,6 +88,7 @@  struct USBHostDevice {
     bool                             needs_autoscan;
     bool                             allow_one_guest_reset;
     bool                             allow_all_guest_resets;
+    bool                             suppress_remote_wake;
 
     /* state */
     QTAILQ_ENTRY(USBHostDevice)      next;
@@ -386,6 +387,8 @@  static void LIBUSB_CALL usb_host_req_complete_ctrl(struct libusb_transfer *xfer)
     r->p->status = status_map[xfer->status];
     r->p->actual_length = xfer->actual_length;
     if (r->in && xfer->actual_length) {
+        USBDevice *udev = USB_DEVICE(s);
+        struct libusb_config_descriptor *conf = (void *)r->cbuf;
         memcpy(r->cbuf, r->buffer + 8, xfer->actual_length);
 
         /* Fix up USB-3 ep0 maxpacket size to allow superspeed connected devices
@@ -394,6 +397,21 @@  static void LIBUSB_CALL usb_host_req_complete_ctrl(struct libusb_transfer *xfer)
             r->cbuf[7] == 9) {
             r->cbuf[7] = 64;
         }
+        /*
+         *If this is GET_DESCRIPTOR request for configuration descriptor,
+         * remove 'remote wakeup' flag from it to prevent idle power down
+         * in Windows guest
+         */
+        if (s->suppress_remote_wake &&
+            udev->setup_buf[0] == USB_DIR_IN &&
+            udev->setup_buf[1] == USB_REQ_GET_DESCRIPTOR &&
+            udev->setup_buf[3] == USB_DT_CONFIG && udev->setup_buf[2] == 0 &&
+            xfer->actual_length >
+                offsetof(struct libusb_config_descriptor, bmAttributes) &&
+            (conf->bmAttributes & USB_CFG_ATT_WAKEUP)) {
+                trace_usb_host_remote_wakeup_removed(s->bus_num, s->addr);
+                conf->bmAttributes &= ~USB_CFG_ATT_WAKEUP;
+        }
     }
     trace_usb_host_req_complete(s->bus_num, s->addr, r->p,
                                 r->p->status, r->p->actual_length);
@@ -1596,6 +1614,8 @@  static Property usb_host_dev_properties[] = {
                        LIBUSB_LOG_LEVEL_WARNING),
     DEFINE_PROP_BIT("pipeline",    USBHostDevice, options,
                     USB_HOST_OPT_PIPELINE, true),
+    DEFINE_PROP_BOOL("suppress-remote-wake", USBHostDevice,
+                     suppress_remote_wake, true),
     DEFINE_PROP_END_OF_LIST(),
 };
 
diff --git a/hw/usb/trace-events b/hw/usb/trace-events
index 2d3713351c38..1c24d82c09c0 100644
--- a/hw/usb/trace-events
+++ b/hw/usb/trace-events
@@ -266,3 +266,4 @@  usb_host_parse_config(int bus, int addr, int value, int active) "dev %d:%d, valu
 usb_host_parse_interface(int bus, int addr, int num, int alt, int active) "dev %d:%d, num %d, alt %d, active %d"
 usb_host_parse_endpoint(int bus, int addr, int ep, const char *dir, const char *type, int active) "dev %d:%d, ep %d, %s, %s, active %d"
 usb_host_parse_error(int bus, int addr, const char *errmsg) "dev %d:%d, msg %s"
+usb_host_remote_wakeup_removed(int bus, int addr) "dev %d:%d"