[1/6] dt-bindings: add binding for Rockchip combo phy using an Innosilicon IP
diff mbox series

Message ID 1578986580-71974-2-git-send-email-shawn.lin@rock-chips.com
State New
Headers show
Series
  • Add Rockchip new PCIe controller and combo phy support
Related show

Commit Message

Shawn Lin Jan. 14, 2020, 7:22 a.m. UTC
This IP could supports USB3.0 and PCIe.

Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>

---

 .../bindings/phy/rockchip,inno-combophy.yaml       | 84 ++++++++++++++++++++++
 1 file changed, 84 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml

Comments

Rob Herring Jan. 14, 2020, 11:43 p.m. UTC | #1
On Tue, Jan 14, 2020 at 03:22:55PM +0800, Shawn Lin wrote:
> This IP could supports USB3.0 and PCIe.
> 
> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
> 
> ---
> 
>  .../bindings/phy/rockchip,inno-combophy.yaml       | 84 ++++++++++++++++++++++
>  1 file changed, 84 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml

Fails 'make dt_binding_check':

/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml: 
ignoring, error in schema: properties: rockchip,combphygrf
Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11: 
Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml: 
properties:rockchip,combphygrf: {'items': [{'description': 'The grf for 
COMBPHY configuration and state registers.'}]} is not valid under any of 
the given schemas (Possible causes of the failure):
	
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml: 
properties:rockchip,combphygrf: 'description' is a required property


> 
> diff --git a/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml b/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml
> new file mode 100644
> index 0000000..d647ab3
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml
> @@ -0,0 +1,84 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/phy/rockchip,inno-combophy.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Rockchip USB3.0/PCI-e combo phy
> +
> +maintainers:
> +        - Shawn Lin <shawn.lin@rock-chips.com>
> +        - William Wu <william.wu@rock-chips.com>

2 space indent.

> +
> +properties:
> +  "#phy-cells":
> +    const: 1
> +
> +  compatible:
> +    enum:
> +      - rockchip,rk1808-combphy
> +
> +  reg:
> +    maxItems: 1
> +
> +  clocks:
> +    items:
> +      - description: PLL reference clock
> +
> +  clock-names:
> +    items:
> +      - const: refclk
> +
> +  resets:
> +    items:
> +      - description: OTG unit reset line
> +      - description: POR unit reset line
> +      - description: APB interface reset line
> +      - description: PIPE unit reset line
> +
> +  reset-names:
> +    items:
> +      - const: otg-rst
> +      - const: combphy-por
> +      - const: combphy-apb
> +      - const: combphy-pipe
> +
> +  rockchip,combphygrf:
> +    items:
> +      - description: The grf for COMBPHY configuration and state registers.
> +
> +required:
> +  - "#phy-cells"
> +  - compatible
> +  - reg
> +  - clocks
> +  - clock-names
> +  - resets
> +  - reset-names
> +  - rockchip,combphygrf
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    combphy_grf: syscon@fe018000 {
> +        compatible = "rockchip,usb3phy-grf", "syscon";
> +        reg = <0x0 0xfe018000 0x0 0x8000>;
> +    };
> +
> +    combphy: phy@ff380000 {
> +        compatible = "rockchip,rk1808-combphy";
> +        reg = <0x0 0xff380000 0x0 0x10000>;
> +        #phy-cells = <1>;
> +        clocks = <&cru SCLK_PCIEPHY_REF>;
> +        clock-names = "refclk";
> +        assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
> +        assigned-clock-rates = <25000000>;
> +        resets = <&cru SRST_USB3_OTG_A>, <&cru SRST_PCIEPHY_POR>,
> +                 <&cru SRST_PCIEPHY_P>, <&cru SRST_PCIEPHY_PIPE>;
> +        reset-names = "otg-rst", "combphy-por",
> +                      "combphy-apb", "combphy-pipe";
> +        rockchip,combphygrf = <&combphy_grf>;
> +    };
> +
> +...
> -- 
> 1.9.1
> 
> 
>
Shawn Lin Jan. 16, 2020, 12:03 a.m. UTC | #2
On 2020/1/15 7:43, Rob Herring wrote:
> On Tue, Jan 14, 2020 at 03:22:55PM +0800, Shawn Lin wrote:
>> This IP could supports USB3.0 and PCIe.
>>
>> Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
>>
>> ---
>>
>>   .../bindings/phy/rockchip,inno-combophy.yaml       | 84 ++++++++++++++++++++++
>>   1 file changed, 84 insertions(+)
>>   create mode 100644 Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml
> 
> Fails 'make dt_binding_check':
> 
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml:
> ignoring, error in schema: properties: rockchip,combphygrf
> Documentation/devicetree/bindings/display/simple-framebuffer.example.dts:21.16-37.11:
> Warning (chosen_node_is_root): /example-0/chosen: chosen node must be at root node
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml:
> properties:rockchip,combphygrf: {'items': [{'description': 'The grf for
> COMBPHY configuration and state registers.'}]} is not valid under any of
> the given schemas (Possible causes of the failure):
> 	
> /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml:
> properties:rockchip,combphygrf: 'description' is a required property
> 

Thanks Rob, will fix them in v2.

> 
>>
>> diff --git a/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml b/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml
>> new file mode 100644
>> index 0000000..d647ab3
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml
>> @@ -0,0 +1,84 @@
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/phy/rockchip,inno-combophy.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Rockchip USB3.0/PCI-e combo phy
>> +
>> +maintainers:
>> +        - Shawn Lin <shawn.lin@rock-chips.com>
>> +        - William Wu <william.wu@rock-chips.com>
> 
> 2 space indent.
> 
>> +
>> +properties:
>> +  "#phy-cells":
>> +    const: 1
>> +
>> +  compatible:
>> +    enum:
>> +      - rockchip,rk1808-combphy
>> +
>> +  reg:
>> +    maxItems: 1
>> +
>> +  clocks:
>> +    items:
>> +      - description: PLL reference clock
>> +
>> +  clock-names:
>> +    items:
>> +      - const: refclk
>> +
>> +  resets:
>> +    items:
>> +      - description: OTG unit reset line
>> +      - description: POR unit reset line
>> +      - description: APB interface reset line
>> +      - description: PIPE unit reset line
>> +
>> +  reset-names:
>> +    items:
>> +      - const: otg-rst
>> +      - const: combphy-por
>> +      - const: combphy-apb
>> +      - const: combphy-pipe
>> +
>> +  rockchip,combphygrf:
>> +    items:
>> +      - description: The grf for COMBPHY configuration and state registers.
>> +
>> +required:
>> +  - "#phy-cells"
>> +  - compatible
>> +  - reg
>> +  - clocks
>> +  - clock-names
>> +  - resets
>> +  - reset-names
>> +  - rockchip,combphygrf
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> +  - |
>> +    combphy_grf: syscon@fe018000 {
>> +        compatible = "rockchip,usb3phy-grf", "syscon";
>> +        reg = <0x0 0xfe018000 0x0 0x8000>;
>> +    };
>> +
>> +    combphy: phy@ff380000 {
>> +        compatible = "rockchip,rk1808-combphy";
>> +        reg = <0x0 0xff380000 0x0 0x10000>;
>> +        #phy-cells = <1>;
>> +        clocks = <&cru SCLK_PCIEPHY_REF>;
>> +        clock-names = "refclk";
>> +        assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
>> +        assigned-clock-rates = <25000000>;
>> +        resets = <&cru SRST_USB3_OTG_A>, <&cru SRST_PCIEPHY_POR>,
>> +                 <&cru SRST_PCIEPHY_P>, <&cru SRST_PCIEPHY_PIPE>;
>> +        reset-names = "otg-rst", "combphy-por",
>> +                      "combphy-apb", "combphy-pipe";
>> +        rockchip,combphygrf = <&combphy_grf>;
>> +    };
>> +
>> +...
>> -- 
>> 1.9.1
>>
>>
>>
> 
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
> 
> 
>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml b/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml
new file mode 100644
index 0000000..d647ab3
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/rockchip,inno-combophy.yaml
@@ -0,0 +1,84 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/rockchip,inno-combophy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip USB3.0/PCI-e combo phy
+
+maintainers:
+        - Shawn Lin <shawn.lin@rock-chips.com>
+        - William Wu <william.wu@rock-chips.com>
+
+properties:
+  "#phy-cells":
+    const: 1
+
+  compatible:
+    enum:
+      - rockchip,rk1808-combphy
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: PLL reference clock
+
+  clock-names:
+    items:
+      - const: refclk
+
+  resets:
+    items:
+      - description: OTG unit reset line
+      - description: POR unit reset line
+      - description: APB interface reset line
+      - description: PIPE unit reset line
+
+  reset-names:
+    items:
+      - const: otg-rst
+      - const: combphy-por
+      - const: combphy-apb
+      - const: combphy-pipe
+
+  rockchip,combphygrf:
+    items:
+      - description: The grf for COMBPHY configuration and state registers.
+
+required:
+  - "#phy-cells"
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - rockchip,combphygrf
+
+additionalProperties: false
+
+examples:
+  - |
+    combphy_grf: syscon@fe018000 {
+        compatible = "rockchip,usb3phy-grf", "syscon";
+        reg = <0x0 0xfe018000 0x0 0x8000>;
+    };
+
+    combphy: phy@ff380000 {
+        compatible = "rockchip,rk1808-combphy";
+        reg = <0x0 0xff380000 0x0 0x10000>;
+        #phy-cells = <1>;
+        clocks = <&cru SCLK_PCIEPHY_REF>;
+        clock-names = "refclk";
+        assigned-clocks = <&cru SCLK_PCIEPHY_REF>;
+        assigned-clock-rates = <25000000>;
+        resets = <&cru SRST_USB3_OTG_A>, <&cru SRST_PCIEPHY_POR>,
+                 <&cru SRST_PCIEPHY_P>, <&cru SRST_PCIEPHY_PIPE>;
+        reset-names = "otg-rst", "combphy-por",
+                      "combphy-apb", "combphy-pipe";
+        rockchip,combphygrf = <&combphy_grf>;
+    };
+
+...