[RFC,v1,2/3] dt-bindings: mmc: convert synopsys dw-mshc bindings to yaml
diff mbox series

Message ID 20200114213809.27166-2-jbx6244@gmail.com
State New
Headers show
Series
  • [RFC,v1,1/3] dt-bindings: mmc: combine common mmc and dw-mshc properties
Related show

Commit Message

Johan Jonker Jan. 14, 2020, 9:38 p.m. UTC
Convert the Synopsys designware mobile storage host controller
device tree bindings to yaml

Signed-off-by: Johan Jonker <jbx6244@gmail.com>
---
 .../bindings/mmc/synopsys-dw-mshc-common.yaml      |  81 ++++++++++++
 .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   | 141 ---------------------
 .../devicetree/bindings/mmc/synopsys-dw-mshc.yaml  |  88 +++++++++++++
 3 files changed, 169 insertions(+), 141 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
 delete mode 100644 Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
 create mode 100644 Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml

Comments

Rob Herring Jan. 15, 2020, 3:18 p.m. UTC | #1
On Tue, Jan 14, 2020 at 3:38 PM Johan Jonker <jbx6244@gmail.com> wrote:
>
> Convert the Synopsys designware mobile storage host controller
> device tree bindings to yaml
>
> Signed-off-by: Johan Jonker <jbx6244@gmail.com>
> ---
>  .../bindings/mmc/synopsys-dw-mshc-common.yaml      |  81 ++++++++++++
>  .../devicetree/bindings/mmc/synopsys-dw-mshc.txt   | 141 ---------------------
>  .../devicetree/bindings/mmc/synopsys-dw-mshc.yaml  |  88 +++++++++++++
>  3 files changed, 169 insertions(+), 141 deletions(-)
>  create mode 100644 Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
>  delete mode 100644 Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
>  create mode 100644 Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
>
> diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
> new file mode 100644
> index 000000000..aae84a4bc
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
> @@ -0,0 +1,81 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc-common.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys Designware Mobile Storage Host Controller Common Properties
> +
> +allOf:
> +  - $ref: "mmc-controller-common.yaml"
> +
> +maintainers:
> +  - Ulf Hansson <ulf.hansson@linaro.org>
> +
> +properties:
> +  resets:
> +    maxItems: 1
> +    description:
> +      phandle + reset specifier pair, intended to represent hardware
> +      reset signal present internally in some host controller IC designs.
> +      See Documentation/devicetree/bindings/reset/reset.txt for details.

Drop the description. It has nothing unique to this binding.

> +
> +  reset-names:
> +    const: reset
> +    description:
> +      Request name for using "resets" property.
> +      (It will be used together with "resets" property.)

Drop.

> +
> +  clock-frequency:
> +    description:
> +      Should be the frequency (in Hz) of the ciu clock.  If this
> +      is specified and the ciu clock is specified then we'll try to set the ciu
> +      clock to this at probe time.
> +
> +  fifo-depth:
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      The maximum size of the tx/rx fifo's. If this property is not
> +      specified, the default value of the fifo size is determined from the
> +      controller registers.
> +
> +  card-detect-delay:
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +      - default: 0
> +    description:
> +      Delay in milli-seconds before detecting card after card
> +      insert event. The default value is 0.
> +
> +  data-addr:
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/uint32
> +    description:
> +      Override fifo address with value provided by DT. The default FIFO reg
> +      offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
> +      by driver. If the controller does not follow this rule, please use
> +      this property to set fifo address in device tree.
> +
> +  fifo-watermark-aligned:
> +    allOf:
> +      - $ref: /schemas/types.yaml#/definitions/flag
> +    description:
> +      Data done irq is expected if data length is less than
> +      watermark in PIO mode. But fifo watermark is requested to be aligned
> +      with data length in some SoC so that TX/RX irq can be generated with
> +      data done irq. Add this watermark quirk to mark this requirement and
> +      force fifo watermark setting accordingly.
> +
> +  dmas:
> +    maxItems: 1
> +    description:
> +      List of DMA specifiers with the controller specific format as described
> +      in the generic DMA client binding.
> +      Refer to dma-controller.yaml for details.

Drop the description.

> +
> +  dma-names:
> +    const: rx-tx
> +    description:
> +      Request names for generic DMA client binding.
> +      Refer to dma-controller.yaml for details.

Drop

[...]

> diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
> new file mode 100644
> index 000000000..6f85a21d0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
> @@ -0,0 +1,88 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Synopsys Designware Mobile Storage Host Controller Binding
> +
> +allOf:
> +  - $ref: "synopsys-dw-mshc-common.yaml"
> +
> +maintainers:
> +  - Ulf Hansson <ulf.hansson@linaro.org>
> +
> +properties:
> +  compatible:
> +    const: snps,dw-mshc
> +
> +  reg:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  clocks:
> +    minItems: 2
> +    maxItems: 2
> +    description:
> +      Handle to "biu" and "ciu" clocks for the
> +      bus interface unit clock and the card interface unit clock.
> +
> +  clock-names:
> +    items:
> +      - const: biu
> +      - const: ciu
> +
> +required:
> +  - compatible
> +  - reg
> +  - interrupts
> +  - clocks
> +  - clock-names
> +
> +examples:
> +  # The MSHC controller node can be split into two portions, SoC specific and
> +  # board specific portions as listed below.

This split doesn't work because the examples are built and validated
now. It may happen to because all the props are optional, but the
board hunk goes unchecked. So please combine.

> +  - |
> +    dwmmc0@12200000 {
> +      compatible = "snps,dw-mshc";
> +      clocks = <&clock 351>, <&clock 132>;
> +      clock-names = "biu", "ciu";
> +      reg = <0x12200000 0x1000>;
> +      interrupts = <0 75 0>;
> +      #address-cells = <1>;
> +      #size-cells = <0>;
> +      data-addr = <0x200>;
> +      fifo-watermark-aligned;
> +      resets = <&rst 20>;
> +      reset-names = "reset";
> +    };
> +  # [board specific internal DMA resources]
> +  - |
> +    dwmmc0@12200000 {
> +      clock-frequency = <400000000>;
> +      clock-freq-min-max = <400000 200000000>;
> +      broken-cd;
> +      fifo-depth = <0x80>;
> +      card-detect-delay = <200>;
> +      vmmc-supply = <&buck8>;
> +      bus-width = <8>;
> +      cap-mmc-highspeed;
> +      cap-sd-highspeed;
> +    };
> +  # [board specific generic DMA request binding]
> +  - |
> +    dwmmc0@12200000 {
> +      clock-frequency = <400000000>;
> +      clock-freq-min-max = <400000 200000000>;
> +      broken-cd;
> +      fifo-depth = <0x80>;
> +      card-detect-delay = <200>;
> +      vmmc-supply = <&buck8>;
> +      bus-width = <8>;
> +      cap-mmc-highspeed;
> +      cap-sd-highspeed;
> +      dmas = <&pdma 12>;
> +      dma-names = "rx-tx";
> +    };
> --
> 2.11.0
>
Johan Jonker Jan. 16, 2020, noon UTC | #2
See below.

On 1/15/20 4:18 PM, Rob Herring wrote:
> On Tue, Jan 14, 2020 at 3:38 PM Johan Jonker <jbx6244@gmail.com> wrote:
>>

> [...]
> 
>> diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
>> new file mode 100644
>> index 000000000..6f85a21d0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
>> @@ -0,0 +1,88 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Synopsys Designware Mobile Storage Host Controller Binding

[..]

>> +examples:
>> +  # The MSHC controller node can be split into two portions, SoC specific and
>> +  # board specific portions as listed below.
> 


> This split doesn't work because the examples are built and validated
> now. It may happen to because all the props are optional, but the
> board hunk goes unchecked. So please combine.
> 

Hi,

I have no knowledge about this particular hardware to give a realistic
example. Could someone advise here? Or should I just use the first
example for now?

Thanks

>> +  - |
>> +    dwmmc0@12200000 {
>> +      compatible = "snps,dw-mshc";
>> +      clocks = <&clock 351>, <&clock 132>;
>> +      clock-names = "biu", "ciu";
>> +      reg = <0x12200000 0x1000>;
>> +      interrupts = <0 75 0>;
>> +      #address-cells = <1>;
>> +      #size-cells = <0>;
>> +      data-addr = <0x200>;
>> +      fifo-watermark-aligned;
>> +      resets = <&rst 20>;
>> +      reset-names = "reset";
>> +    };
>> +  # [board specific internal DMA resources]
>> +  - |
>> +    dwmmc0@12200000 {
>> +      clock-frequency = <400000000>;
>> +      clock-freq-min-max = <400000 200000000>;
>> +      broken-cd;
>> +      fifo-depth = <0x80>;
>> +      card-detect-delay = <200>;
>> +      vmmc-supply = <&buck8>;
>> +      bus-width = <8>;
>> +      cap-mmc-highspeed;
>> +      cap-sd-highspeed;
>> +    };
>> +  # [board specific generic DMA request binding]
>> +  - |
>> +    dwmmc0@12200000 {
>> +      clock-frequency = <400000000>;
>> +      clock-freq-min-max = <400000 200000000>;
>> +      broken-cd;
>> +      fifo-depth = <0x80>;
>> +      card-detect-delay = <200>;
>> +      vmmc-supply = <&buck8>;
>> +      bus-width = <8>;
>> +      cap-mmc-highspeed;
>> +      cap-sd-highspeed;
>> +      dmas = <&pdma 12>;
>> +      dma-names = "rx-tx";
>> +    };
>> --
>> 2.11.0
>>
Rob Herring Jan. 16, 2020, 2:07 p.m. UTC | #3
On Thu, Jan 16, 2020 at 6:00 AM Johan Jonker <jbx6244@gmail.com> wrote:
>
> See below.
>
> On 1/15/20 4:18 PM, Rob Herring wrote:
> > On Tue, Jan 14, 2020 at 3:38 PM Johan Jonker <jbx6244@gmail.com> wrote:
> >>
>
> > [...]
> >
> >> diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
> >> new file mode 100644
> >> index 000000000..6f85a21d0
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
> >> @@ -0,0 +1,88 @@
> >> +# SPDX-License-Identifier: GPL-2.0
> >> +%YAML 1.2
> >> +---
> >> +$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml#
> >> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> >> +
> >> +title: Synopsys Designware Mobile Storage Host Controller Binding
>
> [..]
>
> >> +examples:
> >> +  # The MSHC controller node can be split into two portions, SoC specific and
> >> +  # board specific portions as listed below.
> >
>
>
> > This split doesn't work because the examples are built and validated
> > now. It may happen to because all the props are optional, but the
> > board hunk goes unchecked. So please combine.
> >
>
> Hi,
>
> I have no knowledge about this particular hardware to give a realistic
> example. Could someone advise here? Or should I just use the first
> example for now?

Just combine the first part and one of the the 2 board hunks. I don't
think having 2 board examples with the only diff being the dma
properties adds much value.

Rob

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
new file mode 100644
index 000000000..aae84a4bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc-common.yaml
@@ -0,0 +1,81 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Common Properties
+
+allOf:
+  - $ref: "mmc-controller-common.yaml"
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+properties:
+  resets:
+    maxItems: 1
+    description:
+      phandle + reset specifier pair, intended to represent hardware
+      reset signal present internally in some host controller IC designs.
+      See Documentation/devicetree/bindings/reset/reset.txt for details.
+
+  reset-names:
+    const: reset
+    description:
+      Request name for using "resets" property.
+      (It will be used together with "resets" property.)
+
+  clock-frequency:
+    description:
+      Should be the frequency (in Hz) of the ciu clock.  If this
+      is specified and the ciu clock is specified then we'll try to set the ciu
+      clock to this at probe time.
+
+  fifo-depth:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      The maximum size of the tx/rx fifo's. If this property is not
+      specified, the default value of the fifo size is determined from the
+      controller registers.
+
+  card-detect-delay:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+      - default: 0
+    description:
+      Delay in milli-seconds before detecting card after card
+      insert event. The default value is 0.
+
+  data-addr:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      Override fifo address with value provided by DT. The default FIFO reg
+      offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A)
+      by driver. If the controller does not follow this rule, please use
+      this property to set fifo address in device tree.
+
+  fifo-watermark-aligned:
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/flag
+    description:
+      Data done irq is expected if data length is less than
+      watermark in PIO mode. But fifo watermark is requested to be aligned
+      with data length in some SoC so that TX/RX irq can be generated with
+      data done irq. Add this watermark quirk to mark this requirement and
+      force fifo watermark setting accordingly.
+
+  dmas:
+    maxItems: 1
+    description:
+      List of DMA specifiers with the controller specific format as described
+      in the generic DMA client binding.
+      Refer to dma-controller.yaml for details.
+
+  dma-names:
+    const: rx-tx
+    description:
+      Request names for generic DMA client binding.
+      Refer to dma-controller.yaml for details.
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
deleted file mode 100644
index 7e5e427a2..000000000
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.txt
+++ /dev/null
@@ -1,141 +0,0 @@ 
-* Synopsys Designware Mobile Storage Host Controller
-
-The Synopsys designware mobile storage host controller is used to interface
-a SoC with storage medium such as eMMC or SD/MMC cards. This file documents
-differences between the core mmc properties described by mmc.txt and the
-properties used by the Synopsys Designware Mobile Storage Host Controller.
-
-Required Properties:
-
-* compatible: should be
-	- snps,dw-mshc: for controllers compliant with synopsys dw-mshc.
-* #address-cells: should be 1.
-* #size-cells: should be 0.
-
-# Slots (DEPRECATED): The slot specific information are contained within
-  child-nodes with each child-node representing a supported slot. There should
-  be atleast one child node representing a card slot. The name of the child node
-  representing the slot is recommended to be slot@n where n is the unique number
-  of the slot connected to the controller. The following are optional properties
-  which can be included in the slot child node.
-
-	* reg: specifies the physical slot number. The valid values of this
-	  property is 0 to (num-slots -1), where num-slots is the value
-	  specified by the num-slots property.
-
-	* bus-width: as documented in mmc core bindings.
-
-	* wp-gpios: specifies the write protect gpio line. The format of the
-	  gpio specifier depends on the gpio controller. If a GPIO is not used
-	  for write-protect, this property is optional.
-
-	* disable-wp: If the wp-gpios property isn't present then (by default)
-	  we'd assume that the write protect is hooked up directly to the
-	  controller's special purpose write protect line (accessible via
-	  the WRTPRT register).  However, it's possible that we simply don't
-	  want write protect.  In that case specify 'disable-wp'.
-	  NOTE: This property is not required for slots known to always
-	  connect to eMMC or SDIO cards.
-
-Optional properties:
-
-* resets: phandle + reset specifier pair, intended to represent hardware
-  reset signal present internally in some host controller IC designs.
-  See Documentation/devicetree/bindings/reset/reset.txt for details.
-
-* reset-names: request name for using "resets" property. Must be "reset".
-	(It will be used together with "resets" property.)
-
-* clocks: from common clock binding: handle to biu and ciu clocks for the
-  bus interface unit clock and the card interface unit clock.
-
-* clock-names: from common clock binding: Shall be "biu" and "ciu".
-  If the biu clock is missing we'll simply skip enabling it.  If the
-  ciu clock is missing we'll just assume that the clock is running at
-  clock-frequency.  It is an error to omit both the ciu clock and the
-  clock-frequency.
-
-* clock-frequency: should be the frequency (in Hz) of the ciu clock.  If this
-  is specified and the ciu clock is specified then we'll try to set the ciu
-  clock to this at probe time.
-
-* fifo-depth: The maximum size of the tx/rx fifo's. If this property is not
-  specified, the default value of the fifo size is determined from the
-  controller registers.
-
-* card-detect-delay: Delay in milli-seconds before detecting card after card
-  insert event. The default value is 0.
-
-* data-addr: Override fifo address with value provided by DT. The default FIFO reg
-  offset is assumed as 0x100 (version < 0x240A) and 0x200(version >= 0x240A) by
-  driver. If the controller does not follow this rule, please use this property
-  to set fifo address in device tree.
-
-* fifo-watermark-aligned: Data done irq is expected if data length is less than
-  watermark in PIO mode. But fifo watermark is requested to be aligned with data
-  length in some SoC so that TX/RX irq can be generated with data done irq. Add this
-  watermark quirk to mark this requirement and force fifo watermark setting
-  accordingly.
-
-* vmmc-supply: The phandle to the regulator to use for vmmc.  If this is
-  specified we'll defer probe until we can find this regulator.
-
-* dmas: List of DMA specifiers with the controller specific format as described
-  in the generic DMA client binding. Refer to dma.txt for details.
-
-* dma-names: request names for generic DMA client binding. Must be "rx-tx".
-  Refer to dma.txt for details.
-
-Aliases:
-
-- All the MSHC controller nodes should be represented in the aliases node using
-  the following format 'mshc{n}' where n is a unique number for the alias.
-
-Example:
-
-The MSHC controller node can be split into two portions, SoC specific and
-board specific portions as listed below.
-
-	dwmmc0@12200000 {
-		compatible = "snps,dw-mshc";
-		clocks = <&clock 351>, <&clock 132>;
-		clock-names = "biu", "ciu";
-		reg = <0x12200000 0x1000>;
-		interrupts = <0 75 0>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		data-addr = <0x200>;
-		fifo-watermark-aligned;
-		resets = <&rst 20>;
-		reset-names = "reset";
-	};
-
-[board specific internal DMA resources]
-
-	dwmmc0@12200000 {
-		clock-frequency = <400000000>;
-		clock-freq-min-max = <400000 200000000>;
-		broken-cd;
-		fifo-depth = <0x80>;
-		card-detect-delay = <200>;
-		vmmc-supply = <&buck8>;
-		bus-width = <8>;
-		cap-mmc-highspeed;
-		cap-sd-highspeed;
-	};
-
-[board specific generic DMA request binding]
-
-	dwmmc0@12200000 {
-		clock-frequency = <400000000>;
-		clock-freq-min-max = <400000 200000000>;
-		broken-cd;
-		fifo-depth = <0x80>;
-		card-detect-delay = <200>;
-		vmmc-supply = <&buck8>;
-		bus-width = <8>;
-		cap-mmc-highspeed;
-		cap-sd-highspeed;
-		dmas = <&pdma 12>;
-		dma-names = "rx-tx";
-	};
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
new file mode 100644
index 000000000..6f85a21d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
@@ -0,0 +1,88 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/mmc/synopsys-dw-mshc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Synopsys Designware Mobile Storage Host Controller Binding
+
+allOf:
+  - $ref: "synopsys-dw-mshc-common.yaml"
+
+maintainers:
+  - Ulf Hansson <ulf.hansson@linaro.org>
+
+properties:
+  compatible:
+    const: snps,dw-mshc
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 2
+    maxItems: 2
+    description:
+      Handle to "biu" and "ciu" clocks for the
+      bus interface unit clock and the card interface unit clock.
+
+  clock-names:
+    items:
+      - const: biu
+      - const: ciu
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+
+examples:
+  # The MSHC controller node can be split into two portions, SoC specific and
+  # board specific portions as listed below.
+  - |
+    dwmmc0@12200000 {
+      compatible = "snps,dw-mshc";
+      clocks = <&clock 351>, <&clock 132>;
+      clock-names = "biu", "ciu";
+      reg = <0x12200000 0x1000>;
+      interrupts = <0 75 0>;
+      #address-cells = <1>;
+      #size-cells = <0>;
+      data-addr = <0x200>;
+      fifo-watermark-aligned;
+      resets = <&rst 20>;
+      reset-names = "reset";
+    };
+  # [board specific internal DMA resources]
+  - |
+    dwmmc0@12200000 {
+      clock-frequency = <400000000>;
+      clock-freq-min-max = <400000 200000000>;
+      broken-cd;
+      fifo-depth = <0x80>;
+      card-detect-delay = <200>;
+      vmmc-supply = <&buck8>;
+      bus-width = <8>;
+      cap-mmc-highspeed;
+      cap-sd-highspeed;
+    };
+  # [board specific generic DMA request binding]
+  - |
+    dwmmc0@12200000 {
+      clock-frequency = <400000000>;
+      clock-freq-min-max = <400000 200000000>;
+      broken-cd;
+      fifo-depth = <0x80>;
+      card-detect-delay = <200>;
+      vmmc-supply = <&buck8>;
+      bus-width = <8>;
+      cap-mmc-highspeed;
+      cap-sd-highspeed;
+      dmas = <&pdma 12>;
+      dma-names = "rx-tx";
+    };