diff mbox series

[v3,1/6] dt-bindings: i2c: at91: document optional bus recovery properties

Message ID 20200115115422.17097-2-codrin.ciubotariu@microchip.com (mailing list archive)
State New, archived
Headers show
Series i2c bus recovery for Microchip SoCs | expand

Commit Message

Codrin Ciubotariu Jan. 15, 2020, 11:54 a.m. UTC
From: Kamel Bouhara <kamel.bouhara@bootlin.com>

The at91 I2C controller can support bus recovery by re-assigning SCL
and SDA to gpios. Add the optional pinctrl and gpio properties to do
so.

Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[codrin.ciubotariu@microchip.com: rebased]
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---

Changes in v3:
 - rebased;
 - added Reviewed-by tag from Rob;

Changes in v2:
 - none;

 Documentation/devicetree/bindings/i2c/i2c-at91.txt | 10 ++++++++++
 1 file changed, 10 insertions(+)

Comments

Ludovic Desroches Jan. 27, 2020, 8:49 a.m. UTC | #1
On Wed, Jan 15, 2020 at 01:54:17PM +0200, Codrin Ciubotariu wrote:
> From: Kamel Bouhara <kamel.bouhara@bootlin.com>
> 
> The at91 I2C controller can support bus recovery by re-assigning SCL
> and SDA to gpios. Add the optional pinctrl and gpio properties to do
> so.
> 
> Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
> [codrin.ciubotariu@microchip.com: rebased]
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Ludovic Desroches <ludovic.desroches@microchip.com>

> ---
> 
> Changes in v3:
>  - rebased;
>  - added Reviewed-by tag from Rob;
> 
> Changes in v2:
>  - none;
> 
>  Documentation/devicetree/bindings/i2c/i2c-at91.txt | 10 ++++++++++
>  1 file changed, 10 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
> index d4bad86107b8..96c914e048f5 100644
> --- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
> +++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
> @@ -28,8 +28,13 @@ Optional properties:
>  	"atmel,sama5d4-i2c",
>  	"atmel,sama5d2-i2c",
>  	"microchip,sam9x60-i2c".
> +- scl-gpios: specify the gpio related to SCL pin
> +- sda-gpios: specify the gpio related to SDA pin
> +- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
> +  bus recovery, call it "gpio" state
>  - Child nodes conforming to i2c bus binding
>  
> +
>  Examples :
>  
>  i2c0: i2c@fff84000 {
> @@ -64,6 +69,11 @@ i2c0: i2c@f8034600 {
>  	clocks = <&flx0>;
>  	atmel,fifo-size = <16>;
>  	i2c-sda-hold-time-ns = <336>;
> +	pinctrl-names = "default", "gpio";
> +	pinctrl-0 = <&pinctrl_i2c0>;
> +	pinctrl-1 = <&pinctrl_i2c0_gpio>;
> +	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
> +	scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
>  
>  	wm8731: wm8731@1a {
>  		compatible = "wm8731";
> -- 
> 2.20.1
>
Wolfram Sang Feb. 22, 2020, 11:33 a.m. UTC | #2
On Wed, Jan 15, 2020 at 01:54:17PM +0200, Codrin Ciubotariu wrote:
> From: Kamel Bouhara <kamel.bouhara@bootlin.com>
> 
> The at91 I2C controller can support bus recovery by re-assigning SCL
> and SDA to gpios. Add the optional pinctrl and gpio properties to do
> so.
> 
> Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
> [codrin.ciubotariu@microchip.com: rebased]
> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
> Reviewed-by: Rob Herring <robh@kernel.org>

Applied to for-next, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/i2c/i2c-at91.txt b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
index d4bad86107b8..96c914e048f5 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-at91.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-at91.txt
@@ -28,8 +28,13 @@  Optional properties:
 	"atmel,sama5d4-i2c",
 	"atmel,sama5d2-i2c",
 	"microchip,sam9x60-i2c".
+- scl-gpios: specify the gpio related to SCL pin
+- sda-gpios: specify the gpio related to SDA pin
+- pinctrl: add extra pinctrl to configure i2c pins to gpio function for i2c
+  bus recovery, call it "gpio" state
 - Child nodes conforming to i2c bus binding
 
+
 Examples :
 
 i2c0: i2c@fff84000 {
@@ -64,6 +69,11 @@  i2c0: i2c@f8034600 {
 	clocks = <&flx0>;
 	atmel,fifo-size = <16>;
 	i2c-sda-hold-time-ns = <336>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c0>;
+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
+	sda-gpios = <&pioA 30 GPIO_ACTIVE_HIGH>;
+	scl-gpios = <&pioA 31 GPIO_ACTIVE_HIGH>;
 
 	wm8731: wm8731@1a {
 		compatible = "wm8731";