[v6,6/6] arm64: dts: meson: a1: Enable DWC3 controller
diff mbox series

Message ID 1579220504-110067-7-git-send-email-hanjie.lin@amlogic.com
State New
Headers show
Series
  • arm64: meson: Add support for USB on Amlogic A1
Related show

Commit Message

Hanjie Lin Jan. 17, 2020, 12:21 a.m. UTC
Enable DWC3 controller for Meson A1 SoC.

Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
---
 arch/arm64/boot/dts/amlogic/meson-a1.dtsi | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
index fb0ba85..9077ffa 100644
--- a/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-a1.dtsi
@@ -7,6 +7,8 @@ 
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/power/meson-a1-power.h>
 #include <dt-bindings/reset/amlogic,meson-a1-reset.h>
+#include <dt-bindings/clock/a1-pll-clkc.h>
+#include <dt-bindings/clock/a1-clkc.h>
 
 / {
 	compatible = "amlogic,a1";
@@ -127,6 +129,35 @@ 
 			#interrupt-cells = <3>;
 			#address-cells = <0>;
 		};
+
+		usb: usb@ffe09000 {
+			status = "okay";
+			compatible = "amlogic,meson-a1-usb-ctrl";
+			reg = <0x0 0xffe09000 0x0 0xa0>;
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges;
+
+			clocks = <&clkc_periphs CLKID_USB_CTRL>,
+				 <&clkc_periphs CLKID_USB_BUS>,
+				 <&clkc_periphs CLKID_XTAL_USB_CTRL>;
+			clock-names = "usb_ctrl", "usb_bus", "xtal_usb_ctrl";
+			resets = <&reset RESET_USBCTRL>;
+
+			dr_mode = "host";
+
+			phys = <&usb2_phy1>;
+			phy-names = "usb2-phy1";
+
+			dwc3: usb@ff400000 {
+				compatible = "snps,dwc3";
+				reg = <0x0 0xff400000 0x0 0x100000>;
+				interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
+				dr_mode = "host";
+				snps,dis_u2_susphy_quirk;
+				snps,quirk-frame-length-adjustment = <0x20>;
+			};
+		};
 	};
 
 	timer {