nvmem: imx: ocotp: add i.MX8MP support
diff mbox series

Message ID 1579231433-14201-1-git-send-email-peng.fan@nxp.com
State New
Headers show
Series
  • nvmem: imx: ocotp: add i.MX8MP support
Related show

Commit Message

Peng Fan Jan. 17, 2020, 3:28 a.m. UTC
From: Peng Fan <peng.fan@nxp.com>

i.MX8MP has 96 banks with each bank 4 words. And it has different
ctrl register layout, so add new macros for that.

Signed-off-by: Peng Fan <peng.fan@nxp.com>
---

dt-bindings doc has been posted by Anson Huang

 drivers/nvmem/imx-ocotp.c | 21 +++++++++++++++++++++
 1 file changed, 21 insertions(+)

Comments

Peng Fan Feb. 9, 2020, 8:41 a.m. UTC | #1
> Subject: [PATCH] nvmem: imx: ocotp: add i.MX8MP support

Gentle ping..

Thanks,
Peng.

> 
> From: Peng Fan <peng.fan@nxp.com>
> 
> i.MX8MP has 96 banks with each bank 4 words. And it has different ctrl
> register layout, so add new macros for that.
> 
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> 
> dt-bindings doc has been posted by Anson Huang
> 
>  drivers/nvmem/imx-ocotp.c | 21 +++++++++++++++++++++
>  1 file changed, 21 insertions(+)
> 
> diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c index
> 4ba9cc8f76df..794858093086 100644
> --- a/drivers/nvmem/imx-ocotp.c
> +++ b/drivers/nvmem/imx-ocotp.c
> @@ -44,6 +44,11 @@
>  #define IMX_OCOTP_BM_CTRL_ERROR		0x00000200
>  #define IMX_OCOTP_BM_CTRL_REL_SHADOWS	0x00000400
> 
> +#define IMX_OCOTP_BM_CTRL_ADDR_8MP		0x000001FF
> +#define IMX_OCOTP_BM_CTRL_BUSY_8MP		0x00000200
> +#define IMX_OCOTP_BM_CTRL_ERROR_8MP		0x00000400
> +#define IMX_OCOTP_BM_CTRL_REL_SHADOWS_8MP	0x00000800
> +
>  #define IMX_OCOTP_BM_CTRL_DEFAULT				\
>  	{							\
>  		.bm_addr = IMX_OCOTP_BM_CTRL_ADDR,		\
> @@ -52,6 +57,14 @@
>  		.bm_rel_shadows = IMX_OCOTP_BM_CTRL_REL_SHADOWS,\
>  	}
> 
> +#define IMX_OCOTP_BM_CTRL_8MP					\
> +	{							\
> +		.bm_addr = IMX_OCOTP_BM_CTRL_ADDR_8MP,		\
> +		.bm_busy = IMX_OCOTP_BM_CTRL_BUSY_8MP,		\
> +		.bm_error = IMX_OCOTP_BM_CTRL_ERROR_8MP,	\
> +		.bm_rel_shadows = IMX_OCOTP_BM_CTRL_REL_SHADOWS_8MP,\
> +	}
> +
>  #define TIMING_STROBE_PROG_US		10	/* Min time to blow a fuse */
>  #define TIMING_STROBE_READ_NS		37	/* Min time before read */
>  #define TIMING_RELAX_NS			17
> @@ -520,6 +533,13 @@ static const struct ocotp_params imx8mn_params =
> {
>  	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
>  };
> 
> +static const struct ocotp_params imx8mp_params = {
> +	.nregs = 384,
> +	.bank_address_words = 0,
> +	.set_timing = imx_ocotp_set_imx6_timing,
> +	.ctrl = IMX_OCOTP_BM_CTRL_8MP,
> +};
> +
>  static const struct of_device_id imx_ocotp_dt_ids[] = {
>  	{ .compatible = "fsl,imx6q-ocotp",  .data = &imx6q_params },
>  	{ .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params }, @@ -532,6
> +552,7 @@ static const struct of_device_id imx_ocotp_dt_ids[] = {
>  	{ .compatible = "fsl,imx8mq-ocotp", .data = &imx8mq_params },
>  	{ .compatible = "fsl,imx8mm-ocotp", .data = &imx8mm_params },
>  	{ .compatible = "fsl,imx8mn-ocotp", .data = &imx8mn_params },
> +	{ .compatible = "fsl,imx8mp-ocotp", .data = &imx8mp_params },
>  	{ },
>  };
>  MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);
> --
> 2.16.4
Srinivas Kandagatla Feb. 17, 2020, 10:42 a.m. UTC | #2
On 17/01/2020 03:28, Peng Fan wrote:
> From: Peng Fan<peng.fan@nxp.com>
> 
> i.MX8MP has 96 banks with each bank 4 words. And it has different
> ctrl register layout, so add new macros for that.
> 
> Signed-off-by: Peng Fan<peng.fan@nxp.com>
> ---
> 
> dt-bindings doc has been posted by Anson Huang
> 
>   drivers/nvmem/imx-ocotp.c | 21 +++++++++++++++++++++
>   1 file changed, 21 insertions(+)

Applied Thanks,

--srini

Patch
diff mbox series

diff --git a/drivers/nvmem/imx-ocotp.c b/drivers/nvmem/imx-ocotp.c
index 4ba9cc8f76df..794858093086 100644
--- a/drivers/nvmem/imx-ocotp.c
+++ b/drivers/nvmem/imx-ocotp.c
@@ -44,6 +44,11 @@ 
 #define IMX_OCOTP_BM_CTRL_ERROR		0x00000200
 #define IMX_OCOTP_BM_CTRL_REL_SHADOWS	0x00000400
 
+#define IMX_OCOTP_BM_CTRL_ADDR_8MP		0x000001FF
+#define IMX_OCOTP_BM_CTRL_BUSY_8MP		0x00000200
+#define IMX_OCOTP_BM_CTRL_ERROR_8MP		0x00000400
+#define IMX_OCOTP_BM_CTRL_REL_SHADOWS_8MP	0x00000800
+
 #define IMX_OCOTP_BM_CTRL_DEFAULT				\
 	{							\
 		.bm_addr = IMX_OCOTP_BM_CTRL_ADDR,		\
@@ -52,6 +57,14 @@ 
 		.bm_rel_shadows = IMX_OCOTP_BM_CTRL_REL_SHADOWS,\
 	}
 
+#define IMX_OCOTP_BM_CTRL_8MP					\
+	{							\
+		.bm_addr = IMX_OCOTP_BM_CTRL_ADDR_8MP,		\
+		.bm_busy = IMX_OCOTP_BM_CTRL_BUSY_8MP,		\
+		.bm_error = IMX_OCOTP_BM_CTRL_ERROR_8MP,	\
+		.bm_rel_shadows = IMX_OCOTP_BM_CTRL_REL_SHADOWS_8MP,\
+	}
+
 #define TIMING_STROBE_PROG_US		10	/* Min time to blow a fuse */
 #define TIMING_STROBE_READ_NS		37	/* Min time before read */
 #define TIMING_RELAX_NS			17
@@ -520,6 +533,13 @@  static const struct ocotp_params imx8mn_params = {
 	.ctrl = IMX_OCOTP_BM_CTRL_DEFAULT,
 };
 
+static const struct ocotp_params imx8mp_params = {
+	.nregs = 384,
+	.bank_address_words = 0,
+	.set_timing = imx_ocotp_set_imx6_timing,
+	.ctrl = IMX_OCOTP_BM_CTRL_8MP,
+};
+
 static const struct of_device_id imx_ocotp_dt_ids[] = {
 	{ .compatible = "fsl,imx6q-ocotp",  .data = &imx6q_params },
 	{ .compatible = "fsl,imx6sl-ocotp", .data = &imx6sl_params },
@@ -532,6 +552,7 @@  static const struct of_device_id imx_ocotp_dt_ids[] = {
 	{ .compatible = "fsl,imx8mq-ocotp", .data = &imx8mq_params },
 	{ .compatible = "fsl,imx8mm-ocotp", .data = &imx8mm_params },
 	{ .compatible = "fsl,imx8mn-ocotp", .data = &imx8mn_params },
+	{ .compatible = "fsl,imx8mp-ocotp", .data = &imx8mp_params },
 	{ },
 };
 MODULE_DEVICE_TABLE(of, imx_ocotp_dt_ids);