diff mbox series

[v5,2/2] dt-bindings: atmel-usart: add microchip,sam9x60-{usart, dbgu}

Message ID 1579262309-6542-3-git-send-email-claudiu.beznea@microchip.com (mailing list archive)
State Accepted
Commit aac5d8fec9cae8bcdf1eaf0e9733f8839c8a72b4
Headers show
Series add device tree for SAM9X60 SoC and SAM9X60-EK board | expand

Commit Message

Claudiu Beznea Jan. 17, 2020, 11:58 a.m. UTC
Add microchip,sam9x60-usart and add microchip,sam9x60-dbgu to DT
bindings documentation.

Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
---

Hi Lee,

Between version 3 (that you Acked-for-MFD-by) and this one, there is a
new line introduced in this patch:

+       - "microchip,sam9x60-usart"

I kept your Acked-for-MFD-by in this version (with the extra line).
Tell me if you consider otherwise.

Thank you,
Claudiu Beznea

 Documentation/devicetree/bindings/mfd/atmel-usart.txt | 2 ++
 1 file changed, 2 insertions(+)

Comments

Lee Jones Jan. 20, 2020, 8:39 a.m. UTC | #1
On Fri, 17 Jan 2020, Claudiu Beznea wrote:

> Add microchip,sam9x60-usart and add microchip,sam9x60-dbgu to DT
> bindings documentation.
> 
> Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
> Acked-for-MFD-by: Lee Jones <lee.jones@linaro.org>
> ---
> 
> Hi Lee,
> 
> Between version 3 (that you Acked-for-MFD-by) and this one, there is a
> new line introduced in this patch:
> 
> +       - "microchip,sam9x60-usart"
> 
> I kept your Acked-for-MFD-by in this version (with the extra line).
> Tell me if you consider otherwise.
> 
> Thank you,
> Claudiu Beznea
> 
>  Documentation/devicetree/bindings/mfd/atmel-usart.txt | 2 ++
>  1 file changed, 2 insertions(+)

Applied, thanks.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/mfd/atmel-usart.txt b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
index 614a14b5d205..a09133066aff 100644
--- a/Documentation/devicetree/bindings/mfd/atmel-usart.txt
+++ b/Documentation/devicetree/bindings/mfd/atmel-usart.txt
@@ -4,8 +4,10 @@  Required properties for USART:
 - compatible: Should be one of the following:
 	- "atmel,at91rm9200-usart"
 	- "atmel,at91sam9260-usart"
+	- "microchip,sam9x60-usart"
 	- "atmel,at91rm9200-dbgu", "atmel,at91rm9200-usart"
 	- "atmel,at91sam9260-dbgu", "atmel,at91sam9260-usart"
+	- "microchip,sam9x60-dbgu", "microchip,sam9x60-usart"
 - reg: Should contain registers location and length
 - interrupts: Should contain interrupt
 - clock-names: tuple listing input clock names.