@@ -103,14 +103,14 @@ aic: interrupt-controller@fffff000 {
ramc0: ramc@ffffe400 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe400 0x200>;
- clocks = <&ddrck>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>;
clock-names = "ddrck";
};
ramc1: ramc@ffffe600 {
compatible = "atmel,at91sam9g45-ddramc";
reg = <0xffffe600 0x200>;
- clocks = <&ddrck>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 2>;
clock-names = "ddrck";
};
@@ -128,271 +128,9 @@ pmc: pmc@fffffc00 {
compatible = "atmel,at91sam9g45-pmc", "syscon";
reg = <0xfffffc00 0x100>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- interrupt-controller;
- #address-cells = <1>;
- #size-cells = <0>;
- #interrupt-cells = <1>;
-
- main_osc: main_osc {
- compatible = "atmel,at91rm9200-clk-main-osc";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MOSCS>;
- clocks = <&main_xtal>;
- };
-
- main: mainck {
- compatible = "atmel,at91rm9200-clk-main";
- #clock-cells = <0>;
- clocks = <&main_osc>;
- };
-
- plla: pllack {
- compatible = "atmel,at91rm9200-clk-pll";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKA>;
- clocks = <&main>;
- reg = <0>;
- atmel,clk-input-range = <2000000 32000000>;
- #atmel,pll-clk-output-range-cells = <4>;
- atmel,pll-clk-output-ranges = <745000000 800000000 0 0
- 695000000 750000000 1 0
- 645000000 700000000 2 0
- 595000000 650000000 3 0
- 545000000 600000000 0 1
- 495000000 555000000 1 1
- 445000000 500000000 2 1
- 400000000 450000000 3 1>;
- };
-
- plladiv: plladivck {
- compatible = "atmel,at91sam9x5-clk-plldiv";
- #clock-cells = <0>;
- clocks = <&plla>;
- };
-
- utmi: utmick {
- compatible = "atmel,at91sam9x5-clk-utmi";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_LOCKU>;
- clocks = <&main>;
- };
-
- mck: masterck {
- compatible = "atmel,at91rm9200-clk-master";
- #clock-cells = <0>;
- interrupts-extended = <&pmc AT91_PMC_MCKRDY>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
- atmel,clk-output-range = <0 133333333>;
- atmel,clk-divisors = <1 2 4 3>;
- };
-
- usb: usbck {
- compatible = "atmel,at91sam9x5-clk-usb";
- #clock-cells = <0>;
- clocks = <&plladiv>, <&utmi>;
- };
-
- prog: progck {
- compatible = "atmel,at91sam9g45-clk-programmable";
- #address-cells = <1>;
- #size-cells = <0>;
- interrupt-parent = <&pmc>;
- clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
-
- prog0: prog0 {
- #clock-cells = <0>;
- reg = <0>;
- interrupts = <AT91_PMC_PCKRDY(0)>;
- };
-
- prog1: prog1 {
- #clock-cells = <0>;
- reg = <1>;
- interrupts = <AT91_PMC_PCKRDY(1)>;
- };
- };
-
- systemck {
- compatible = "atmel,at91rm9200-clk-system";
- #address-cells = <1>;
- #size-cells = <0>;
-
- ddrck: ddrck {
- #clock-cells = <0>;
- reg = <2>;
- clocks = <&mck>;
- };
-
- uhpck: uhpck {
- #clock-cells = <0>;
- reg = <6>;
- clocks = <&usb>;
- };
-
- pck0: pck0 {
- #clock-cells = <0>;
- reg = <8>;
- clocks = <&prog0>;
- };
-
- pck1: pck1 {
- #clock-cells = <0>;
- reg = <9>;
- clocks = <&prog1>;
- };
- };
-
- periphck {
- compatible = "atmel,at91rm9200-clk-peripheral";
- #address-cells = <1>;
- #size-cells = <0>;
- clocks = <&mck>;
-
- pioA_clk: pioA_clk {
- #clock-cells = <0>;
- reg = <2>;
- };
-
- pioB_clk: pioB_clk {
- #clock-cells = <0>;
- reg = <3>;
- };
-
- pioC_clk: pioC_clk {
- #clock-cells = <0>;
- reg = <4>;
- };
-
- pioDE_clk: pioDE_clk {
- #clock-cells = <0>;
- reg = <5>;
- };
-
- trng_clk: trng_clk {
- #clock-cells = <0>;
- reg = <6>;
- };
-
- usart0_clk: usart0_clk {
- #clock-cells = <0>;
- reg = <7>;
- };
-
- usart1_clk: usart1_clk {
- #clock-cells = <0>;
- reg = <8>;
- };
-
- usart2_clk: usart2_clk {
- #clock-cells = <0>;
- reg = <9>;
- };
-
- usart3_clk: usart3_clk {
- #clock-cells = <0>;
- reg = <10>;
- };
-
- mci0_clk: mci0_clk {
- #clock-cells = <0>;
- reg = <11>;
- };
-
- twi0_clk: twi0_clk {
- #clock-cells = <0>;
- reg = <12>;
- };
-
- twi1_clk: twi1_clk {
- #clock-cells = <0>;
- reg = <13>;
- };
-
- spi0_clk: spi0_clk {
- #clock-cells = <0>;
- reg = <14>;
- };
-
- spi1_clk: spi1_clk {
- #clock-cells = <0>;
- reg = <15>;
- };
-
- ssc0_clk: ssc0_clk {
- #clock-cells = <0>;
- reg = <16>;
- };
-
- ssc1_clk: ssc1_clk {
- #clock-cells = <0>;
- reg = <17>;
- };
-
- tcb0_clk: tcb0_clk {
- #clock-cells = <0>;
- reg = <18>;
- };
-
- pwm_clk: pwm_clk {
- #clock-cells = <0>;
- reg = <19>;
- };
-
- adc_clk: adc_clk {
- #clock-cells = <0>;
- reg = <20>;
- };
-
- dma0_clk: dma0_clk {
- #clock-cells = <0>;
- reg = <21>;
- };
-
- uhphs_clk: uhphs_clk {
- #clock-cells = <0>;
- reg = <22>;
- };
-
- lcd_clk: lcd_clk {
- #clock-cells = <0>;
- reg = <23>;
- };
-
- ac97_clk: ac97_clk {
- #clock-cells = <0>;
- reg = <24>;
- };
-
- macb0_clk: macb0_clk {
- #clock-cells = <0>;
- reg = <25>;
- };
-
- isi_clk: isi_clk {
- #clock-cells = <0>;
- reg = <26>;
- };
-
- udphs_clk: udphs_clk {
- #clock-cells = <0>;
- reg = <27>;
- };
-
- aestdessha_clk: aestdessha_clk {
- #clock-cells = <0>;
- reg = <28>;
- };
-
- mci1_clk: mci1_clk {
- #clock-cells = <0>;
- reg = <29>;
- };
-
- vdec_clk: vdec_clk {
- #clock-cells = <0>;
- reg = <30>;
- };
- };
+ #clock-cells = <2>;
+ clocks = <&clk32k>, <&main_xtal>;
+ clock-names = "slow_clk", "main_xtal";
};
rstc@fffffd00 {
@@ -405,7 +143,7 @@ pit: timer@fffffd30 {
compatible = "atmel,at91sam9260-pit";
reg = <0xfffffd30 0xf>;
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
};
@@ -421,7 +159,7 @@ tcb0: timer@fff7c000 {
#size-cells = <0>;
reg = <0xfff7c000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
@@ -431,7 +169,7 @@ tcb1: timer@fffd4000 {
#size-cells = <0>;
reg = <0xfffd4000 0x100>;
interrupts = <18 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&tcb0_clk>, <&tcb0_clk>, <&tcb0_clk>, <&clk32k>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&pmc PMC_TYPE_PERIPHERAL 18>, <&clk32k>;
clock-names = "t0_clk", "t1_clk", "t2_clk", "slow_clk";
};
@@ -440,7 +178,7 @@ dma: dma-controller@ffffec00 {
reg = <0xffffec00 0x200>;
interrupts = <21 IRQ_TYPE_LEVEL_HIGH 0>;
#dma-cells = <2>;
- clocks = <&dma0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
clock-names = "dma_clk";
};
@@ -883,7 +621,7 @@ pioA: gpio@fffff200 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioA_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 2>;
};
pioB: gpio@fffff400 {
@@ -894,7 +632,7 @@ pioB: gpio@fffff400 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioB_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 3>;
};
pioC: gpio@fffff600 {
@@ -905,7 +643,7 @@ pioC: gpio@fffff600 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioC_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 4>;
};
pioD: gpio@fffff800 {
@@ -916,7 +654,7 @@ pioD: gpio@fffff800 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioDE_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
};
pioE: gpio@fffffa00 {
@@ -927,7 +665,7 @@ pioE: gpio@fffffa00 {
gpio-controller;
interrupt-controller;
#interrupt-cells = <2>;
- clocks = <&pioDE_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 5>;
};
};
@@ -937,7 +675,7 @@ dbgu: serial@ffffee00 {
interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_dbgu>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
clock-names = "usart";
status = "disabled";
};
@@ -950,7 +688,7 @@ usart0: serial@fff8c000 {
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart0>;
- clocks = <&usart0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
clock-names = "usart";
status = "disabled";
};
@@ -963,7 +701,7 @@ usart1: serial@fff90000 {
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart1>;
- clocks = <&usart1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 8>;
clock-names = "usart";
status = "disabled";
};
@@ -976,7 +714,7 @@ usart2: serial@fff94000 {
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart2>;
- clocks = <&usart2_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
clock-names = "usart";
status = "disabled";
};
@@ -989,7 +727,7 @@ usart3: serial@fff98000 {
atmel,use-dma-tx;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usart3>;
- clocks = <&usart3_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 10>;
clock-names = "usart";
status = "disabled";
};
@@ -1000,7 +738,7 @@ macb0: ethernet@fffbc000 {
interrupts = <25 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_macb_rmii>;
- clocks = <&macb0_clk>, <&macb0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 25>, <&pmc PMC_TYPE_PERIPHERAL 25>;
clock-names = "hclk", "pclk";
status = "disabled";
};
@@ -1009,7 +747,7 @@ trng@fffcc000 {
compatible = "atmel,at91sam9g45-trng";
reg = <0xfffcc000 0x100>;
interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&trng_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
};
i2c0: i2c@fff84000 {
@@ -1020,7 +758,7 @@ i2c0: i2c@fff84000 {
pinctrl-0 = <&pinctrl_i2c0>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
status = "disabled";
};
@@ -1032,7 +770,7 @@ i2c1: i2c@fff88000 {
pinctrl-0 = <&pinctrl_i2c1>;
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&twi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 13>;
status = "disabled";
};
@@ -1042,7 +780,7 @@ ssc0: ssc@fff9c000 {
interrupts = <16 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
- clocks = <&ssc0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 16>;
clock-names = "pclk";
status = "disabled";
};
@@ -1053,7 +791,7 @@ ssc1: ssc@fffa0000 {
interrupts = <17 IRQ_TYPE_LEVEL_HIGH 5>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
- clocks = <&ssc1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
clock-names = "pclk";
status = "disabled";
};
@@ -1064,7 +802,7 @@ ac97: sound@fffac000 {
interrupts = <24 IRQ_TYPE_LEVEL_HIGH 4>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ac97>;
- clocks = <&ac97_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
clock-names = "ac97_clk";
status = "disabled";
};
@@ -1075,7 +813,7 @@ adc0: adc@fffb0000 {
compatible = "atmel,at91sam9g45-adc";
reg = <0xfffb0000 0x100>;
interrupts = <20 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&adc_clk>, <&adc_op_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 20>, <&adc_op_clk>;
clock-names = "adc_clk", "adc_op_clk";
atmel,adc-channels-used = <0xff>;
atmel,adc-vref = <3300>;
@@ -1111,7 +849,7 @@ isi@fffb4000 {
compatible = "atmel,at91sam9g45-isi";
reg = <0xfffb4000 0x4000>;
interrupts = <26 IRQ_TYPE_LEVEL_HIGH 5>;
- clocks = <&isi_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
clock-names = "isi_clk";
status = "disabled";
port {
@@ -1125,7 +863,7 @@ pwm0: pwm@fffb8000 {
reg = <0xfffb8000 0x300>;
interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>;
#pwm-cells = <3>;
- clocks = <&pwm_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
status = "disabled";
};
@@ -1138,7 +876,7 @@ mmc0: mmc@fff80000 {
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mci0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
clock-names = "mci_clk";
status = "disabled";
};
@@ -1152,7 +890,7 @@ mmc1: mmc@fffd0000 {
dma-names = "rxtx";
#address-cells = <1>;
#size-cells = <0>;
- clocks = <&mci1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
clock-names = "mci_clk";
status = "disabled";
};
@@ -1176,7 +914,7 @@ spi0: spi@fffa4000 {
interrupts = <14 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi0>;
- clocks = <&spi0_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 14>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -1189,7 +927,7 @@ spi1: spi@fffa8000 {
interrupts = <15 4 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_spi1>;
- clocks = <&spi1_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 15>;
clock-names = "spi_clk";
status = "disabled";
};
@@ -1201,7 +939,7 @@ usb2: gadget@fff78000 {
reg = <0x00600000 0x80000
0xfff78000 0x400>;
interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
- clocks = <&udphs_clk>, <&utmi>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 27>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
clock-names = "pclk", "hclk";
status = "disabled";
@@ -1294,7 +1032,7 @@ fb0: fb@500000 {
interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fb>;
- clocks = <&lcd_clk>, <&lcd_clk>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 23>, <&pmc PMC_TYPE_PERIPHERAL 23>;
clock-names = "hclk", "lcdc_clk";
status = "disabled";
};
@@ -1303,7 +1041,7 @@ usb0: ohci@700000 {
compatible = "atmel,at91rm9200-ohci", "usb-ohci";
reg = <0x00700000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
+ clocks = <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_PERIPHERAL 22>, <&pmc PMC_TYPE_SYSTEM 6>;
clock-names = "ohci_clk", "hclk", "uhpck";
status = "disabled";
};
@@ -1312,7 +1050,7 @@ usb1: ehci@800000 {
compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
reg = <0x00800000 0x100000>;
interrupts = <22 IRQ_TYPE_LEVEL_HIGH 2>;
- clocks = <&utmi>, <&uhphs_clk>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 22>;
clock-names = "usb_clk", "ehci_clk";
status = "disabled";
};
@@ -1330,7 +1068,7 @@ ebi: ebi@10000000 {
0x3 0x0 0x40000000 0x10000000
0x4 0x0 0x50000000 0x10000000
0x5 0x0 0x60000000 0x10000000>;
- clocks = <&mck>;
+ clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
status = "disabled";
nand_controller: nand-controller {
@@ -72,9 +72,9 @@ ov2640: camera@30 {
pinctrl-0 = <&pinctrl_pck1_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
resetb-gpios = <&pioD 12 GPIO_ACTIVE_LOW>;
pwdn-gpios = <&pioD 13 GPIO_ACTIVE_HIGH>;
- clocks = <&pck1>;
+ clocks = <&pmc PMC_TYPE_SYSTEM 9>;
clock-names = "xvclk";
- assigned-clocks = <&pck1>;
+ assigned-clocks = <&pmc PMC_TYPE_SYSTEM 9>;
assigned-clock-rates = <25000000>;
port {
Switch at91sam9g45 boards to the new PMC clock bindings. Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- arch/arm/boot/dts/at91sam9g45.dtsi | 338 +++---------------------- arch/arm/boot/dts/at91sam9m10g45ek.dts | 4 +- 2 files changed, 40 insertions(+), 302 deletions(-)