[1/8] ARM: at91: pm: use proper master clock register offset
diff mbox series

Message ID 1579522208-19523-2-git-send-email-claudiu.beznea@microchip.com
State New
Headers show
Series
  • PM fixes and improvements for SAM9X60
Related show

Commit Message

Claudiu Beznea Jan. 20, 2020, 12:10 p.m. UTC
SAM9X60's PMC has different master clock register offset than the other
SoCs' PMC. Due to this, specify master clock register offset based
on PMC compatible and pass it to pm_suspend.S since it is also needed
in there. When PM part for SAM9X60 was published the SAM9X60's PMC
(commit f6deae46039c ("clk: at91: add sam9x60 pmc driver")) wasn't
integrated.

Fixes: fd2280a1829b ("ARM: at91: pm: initial PM support for SAM9X60")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
---
 arch/arm/mach-at91/pm.c              | 28 +++++++++++++++++++++++-----
 arch/arm/mach-at91/pm.h              |  1 +
 arch/arm/mach-at91/pm_data-offsets.c |  2 ++
 arch/arm/mach-at91/pm_suspend.S      | 32 ++++++++++++++++++++------------
 4 files changed, 46 insertions(+), 17 deletions(-)

Patch
diff mbox series

diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index 374b9d155558..ae7b148febd9 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -736,13 +736,30 @@  static void __init at91_pm_modes_init(void)
 
 struct pmc_info {
 	unsigned long uhp_udp_mask;
+	unsigned long mckr;
 };
 
 static const struct pmc_info pmc_infos[] __initconst = {
-	{ .uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP },
-	{ .uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP },
-	{ .uhp_udp_mask = AT91SAM926x_PMC_UHP },
-	{ .uhp_udp_mask = 0 },
+	{
+		.uhp_udp_mask = AT91RM9200_PMC_UHP | AT91RM9200_PMC_UDP,
+		.mckr = 0x30,
+	},
+
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+		.mckr = 0x30,
+	},
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP,
+		.mckr = 0x30,
+	},
+	{	.uhp_udp_mask = 0,
+		.mckr = 0x30,
+	},
+	{
+		.uhp_udp_mask = AT91SAM926x_PMC_UHP | AT91SAM926x_PMC_UDP,
+		.mckr = 0x28,
+	},
 };
 
 static const struct of_device_id atmel_pmc_ids[] __initconst = {
@@ -757,7 +774,7 @@  static const struct of_device_id atmel_pmc_ids[] __initconst = {
 	{ .compatible = "atmel,sama5d3-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d4-pmc", .data = &pmc_infos[1] },
 	{ .compatible = "atmel,sama5d2-pmc", .data = &pmc_infos[1] },
-	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[1] },
+	{ .compatible = "microchip,sam9x60-pmc", .data = &pmc_infos[4] },
 	{ /* sentinel */ },
 };
 
@@ -779,6 +796,7 @@  static void __init at91_pm_init(void (*pm_idle)(void))
 
 	pmc = of_id->data;
 	soc_pm.data.uhp_udp_mask = pmc->uhp_udp_mask;
+	soc_pm.data.pmc_mckr_offset = pmc->mckr;
 
 	if (pm_idle)
 		arm_pm_idle = pm_idle;
diff --git a/arch/arm/mach-at91/pm.h b/arch/arm/mach-at91/pm.h
index 9fa4f483f2b5..6f7f4236865a 100644
--- a/arch/arm/mach-at91/pm.h
+++ b/arch/arm/mach-at91/pm.h
@@ -33,6 +33,7 @@  struct at91_pm_data {
 	void __iomem *sfrbu;
 	unsigned int standby_mode;
 	unsigned int suspend_mode;
+	unsigned int pmc_mckr_offset;
 };
 #endif
 
diff --git a/arch/arm/mach-at91/pm_data-offsets.c b/arch/arm/mach-at91/pm_data-offsets.c
index f2d893c03cd9..dfcbe626865c 100644
--- a/arch/arm/mach-at91/pm_data-offsets.c
+++ b/arch/arm/mach-at91/pm_data-offsets.c
@@ -12,6 +12,8 @@  int main(void)
 	DEFINE(PM_DATA_MODE,		offsetof(struct at91_pm_data, mode));
 	DEFINE(PM_DATA_SHDWC,		offsetof(struct at91_pm_data, shdwc));
 	DEFINE(PM_DATA_SFRBU,		offsetof(struct at91_pm_data, sfrbu));
+	DEFINE(PM_DATA_PMC_MCKR_OFFSET,	offsetof(struct at91_pm_data,
+						 pmc_mckr_offset));
 
 	return 0;
 }
diff --git a/arch/arm/mach-at91/pm_suspend.S b/arch/arm/mach-at91/pm_suspend.S
index ed57c879d4e1..52b262d56cfd 100644
--- a/arch/arm/mach-at91/pm_suspend.S
+++ b/arch/arm/mach-at91/pm_suspend.S
@@ -93,6 +93,8 @@  ENTRY(at91_pm_suspend_in_sram)
 	str	tmp1, .memtype
 	ldr	tmp1, [r0, #PM_DATA_MODE]
 	str	tmp1, .pm_mode
+	ldr	tmp1, [r0, #PM_DATA_PMC_MCKR_OFFSET]
+	str	tmp1, .mckr_offset
 	/* Both ldrne below are here to preload their address in the TLB */
 	ldr	tmp1, [r0, #PM_DATA_SHDWC]
 	str	tmp1, .shdwc
@@ -138,9 +140,10 @@  ENDPROC(at91_pm_suspend_in_sram)
 ENTRY(at91_backup_mode)
 	/* Switch the master clock source to slow clock. */
 	ldr	pmc, .pmc_base
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp2, .mckr_offset
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -218,6 +221,7 @@  ENDPROC(at91_backup_mode)
  */
 .macro at91_pm_ulp1_mode
 	ldr	pmc, .pmc_base
+	ldr	tmp2, .mckr_offset
 
 	/* Save RC oscillator state and check if it is enabled. */
 	ldr	tmp1, [pmc, #AT91_PMC_SR]
@@ -254,10 +258,10 @@  ENDPROC(at91_backup_mode)
 	str	tmp1, [pmc, #AT91_CKGR_MOR]
 
 	/* Switch the master clock source to main clock */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
 	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -280,9 +284,9 @@  ENDPROC(at91_backup_mode)
 	wait_moscrdy
 
 	/* Switch the master clock source to slow clock */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -296,10 +300,10 @@  ENDPROC(at91_backup_mode)
 	wait_moscsels
 
 	/* Switch the master clock source to main clock */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	bic	tmp1, tmp1, #AT91_PMC_CSS
 	orr	tmp1, tmp1, #AT91_PMC_CSS_MAIN
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -325,16 +329,17 @@  ENDPROC(at91_backup_mode)
 
 ENTRY(at91_ulp_mode)
 	ldr	pmc, .pmc_base
+	ldr	tmp2, .mckr_offset
 
 	/* Save Master clock setting */
-	ldr	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, [pmc, tmp2]
 	str	tmp1, .saved_mckr
 
 	/*
 	 * Set the Master clock source to slow clock
 	 */
 	bic	tmp1, tmp1, #AT91_PMC_CSS
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	str	tmp1, [pmc, tmp2]
 
 	wait_mckrdy
 
@@ -355,8 +360,9 @@  ulp_exit:
 	/*
 	 * Restore master clock setting
 	 */
-	ldr	tmp1, .saved_mckr
-	str	tmp1, [pmc, #AT91_PMC_MCKR]
+	ldr	tmp1, .mckr_offset
+	ldr	tmp2, .saved_mckr
+	str	tmp2, [pmc, tmp1]
 
 	wait_mckrdy
 
@@ -502,6 +508,8 @@  ENDPROC(at91_sramc_self_refresh)
 	.word 0
 .pm_mode:
 	.word 0
+.mckr_offset:
+	.word 0
 .saved_mckr:
 	.word 0
 .saved_sam9_lpr: