diff mbox series

ath10k: Correct the DMA direction for management tx buffers

Message ID 1579590748-17883-1-git-send-email-pillair@codeaurora.org (mailing list archive)
State Accepted
Commit 6ba8b3b6bd772f575f7736c8fd893c6981fcce16
Delegated to: Kalle Valo
Headers show
Series ath10k: Correct the DMA direction for management tx buffers | expand

Commit Message

Rakesh Pillai Jan. 21, 2020, 7:12 a.m. UTC
The management packets, send to firmware via WMI, are
mapped using the direction DMA_TO_DEVICE. Currently in
case of wmi cleanup, these buffers are being unmapped
using an incorrect DMA direction. This can cause unwanted
behavior when the host driver is handling a restart
of the wlan firmware.

We might see a trace like below

[<ffffff8008098b18>] __dma_inv_area+0x28/0x58
[<ffffff8001176734>] ath10k_wmi_mgmt_tx_clean_up_pending+0x60/0xb0 [ath10k_core]
[<ffffff80088c7c50>] idr_for_each+0x78/0xe4
[<ffffff80011766a4>] ath10k_wmi_detach+0x4c/0x7c [ath10k_core]
[<ffffff8001163d7c>] ath10k_core_stop+0x58/0x68 [ath10k_core]
[<ffffff800114fb74>] ath10k_halt+0xec/0x13c [ath10k_core]
[<ffffff8001165110>] ath10k_core_restart+0x11c/0x1a8 [ath10k_core]
[<ffffff80080c36bc>] process_one_work+0x16c/0x31c

Fix the incorrect DMA direction during the wmi
management tx buffer cleanup.

Tested HW: WCN3990
Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1

Fixes: dc405152bb6 ("ath10k: handle mgmt tx completion event")
Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
---
 drivers/net/wireless/ath/ath10k/wmi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Kalle Valo Jan. 26, 2020, 2:28 p.m. UTC | #1
Rakesh Pillai <pillair@codeaurora.org> wrote:

> The management packets, send to firmware via WMI, are
> mapped using the direction DMA_TO_DEVICE. Currently in
> case of wmi cleanup, these buffers are being unmapped
> using an incorrect DMA direction. This can cause unwanted
> behavior when the host driver is handling a restart
> of the wlan firmware.
> 
> We might see a trace like below
> 
> [<ffffff8008098b18>] __dma_inv_area+0x28/0x58
> [<ffffff8001176734>] ath10k_wmi_mgmt_tx_clean_up_pending+0x60/0xb0 [ath10k_core]
> [<ffffff80088c7c50>] idr_for_each+0x78/0xe4
> [<ffffff80011766a4>] ath10k_wmi_detach+0x4c/0x7c [ath10k_core]
> [<ffffff8001163d7c>] ath10k_core_stop+0x58/0x68 [ath10k_core]
> [<ffffff800114fb74>] ath10k_halt+0xec/0x13c [ath10k_core]
> [<ffffff8001165110>] ath10k_core_restart+0x11c/0x1a8 [ath10k_core]
> [<ffffff80080c36bc>] process_one_work+0x16c/0x31c
> 
> Fix the incorrect DMA direction during the wmi
> management tx buffer cleanup.
> 
> Tested HW: WCN3990
> Tested FW: WLAN.HL.3.1-00784-QCAHLSWMTPLZ-1
> 
> Fixes: dc405152bb6 ("ath10k: handle mgmt tx completion event")
> Signed-off-by: Rakesh Pillai <pillair@codeaurora.org>
> Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Patch applied to ath-next branch of ath.git, thanks.

6ba8b3b6bd77 ath10k: Correct the DMA direction for management tx buffers
diff mbox series

Patch

diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c
index 13f7531..61885d4 100644
--- a/drivers/net/wireless/ath/ath10k/wmi.c
+++ b/drivers/net/wireless/ath/ath10k/wmi.c
@@ -9490,7 +9490,7 @@  static int ath10k_wmi_mgmt_tx_clean_up_pending(int msdu_id, void *ptr,
 
 	msdu = pkt_addr->vaddr;
 	dma_unmap_single(ar->dev, pkt_addr->paddr,
-			 msdu->len, DMA_FROM_DEVICE);
+			 msdu->len, DMA_TO_DEVICE);
 	ieee80211_free_txskb(ar->hw, msdu);
 
 	return 0;