diff mbox series

[4.4.y-cip,09/10] ARM: dts: r8a7744: Add xhci support

Message ID 1579856900-21381-10-git-send-email-prabhakar.mahadev-lad.rj@bp.renesas.com (mailing list archive)
State Accepted
Delegated to: Nobuhiro Iwamatsu
Headers show
Series Renesas RZ/G1N extend peripherals supported by platform | expand

Commit Message

Lad Prabhakar Jan. 24, 2020, 9:08 a.m. UTC 
From: Biju Das <biju.das@bp.renesas.com>

commit 54234e80858cf3730917d71af80a13ac4b8f26dc upstream.

Add a device node for the xhci controller on the Renesas
RZ/G1N (r8a7744) SoC.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
(dropped resets property. changed clocks and power-domains properties.
dropped "renesas,rcar-gen2-xhci" compatible string)
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
---
 arch/arm/boot/dts/r8a7744.dtsi | 18 ++++++++++++++++++
 1 file changed, 18 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/r8a7744.dtsi b/arch/arm/boot/dts/r8a7744.dtsi
index 12d698c..195d1d7 100644
--- a/arch/arm/boot/dts/r8a7744.dtsi
+++ b/arch/arm/boot/dts/r8a7744.dtsi
@@ -1274,6 +1274,24 @@ 
 			dma-channels = <13>;
 		};
 
+		/*
+		 * pci1 and xhci share the same phy, therefore only one of them
+		 * can be active at any one time. If both of them are enabled,
+		 * a race condition will determine who'll control the phy.
+		 * A firmware file is needed by the xhci driver in order for
+		 * USB 3.0 to work properly.
+		 */
+		xhci: usb@ee000000 {
+			compatible = "renesas,xhci-r8a7744";
+			reg = <0 0xee000000 0 0xc00>;
+			interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&mstp3_clks R8A7744_CLK_SSUSB>;
+			power-domains = <&cpg_clocks>;
+			phys = <&usb2 1>;
+			phy-names = "usb";
+			status = "disabled";
+		};
+
 		pci0: pci@ee090000 {
 			compatible = "renesas,pci-r8a7744",
 				     "renesas,pci-rcar-gen2";