diff mbox series

[2/6] ARM: dts: imx7-colibri: fix muxing of usbc_det pin

Message ID 20200204111151.3426090-3-oleksandr.suvorov@toradex.com (mailing list archive)
State New, archived
Headers show
Series Add Aster carrier board support for Colibri iMX7 CoM | expand

Commit Message

Oleksandr Suvorov Feb. 4, 2020, 11:11 a.m. UTC 
USB_C_DET pin shouldn't be in ethernet group.

Creating a separate group allows one to use this pin
as an USB ID pin.

Fixes: b326629f25b7 ("ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D suppor")
Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>
---

 arch/arm/boot/dts/imx7-colibri.dtsi | 9 +++++++--
 1 file changed, 7 insertions(+), 2 deletions(-)

Comments

Shawn Guo Feb. 14, 2020, 8:32 a.m. UTC | #1 
On Tue, Feb 04, 2020 at 01:11:47PM +0200, Oleksandr Suvorov wrote:
> USB_C_DET pin shouldn't be in ethernet group.
> 
> Creating a separate group allows one to use this pin
> as an USB ID pin.
> 
> Fixes: b326629f25b7 ("ARM: dts: imx7: add Toradex Colibri iMX7S/iMX7D suppor")
> Signed-off-by: Oleksandr Suvorov <oleksandr.suvorov@toradex.com>

Applied, thanks.
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx7-colibri.dtsi b/arch/arm/boot/dts/imx7-colibri.dtsi
index d05be3f0e2a7..f18a7c9e1303 100644
--- a/arch/arm/boot/dts/imx7-colibri.dtsi
+++ b/arch/arm/boot/dts/imx7-colibri.dtsi
@@ -346,7 +346,7 @@  &usdhc3 {
 &iomuxc {
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_gpio1 &pinctrl_gpio2 &pinctrl_gpio3 &pinctrl_gpio4
-		     &pinctrl_gpio7>;
+		     &pinctrl_gpio7 &pinctrl_usbc_det>;
 
 	pinctrl_gpio1: gpio1-grp {
 		fsl,pins = <
@@ -451,7 +451,6 @@  MX7D_PAD_SD1_RESET_B__GPIO5_IO2		0X14 /* SODIMM 73 */
 
 	pinctrl_enet1: enet1grp {
 		fsl,pins = <
-			MX7D_PAD_ENET1_CRS__GPIO7_IO14			0x14
 			MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL	0x73
 			MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0	0x73
 			MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1	0x73
@@ -649,6 +648,12 @@  MX7D_PAD_UART3_RX_DATA__UART3_DTE_TX 0x79
 		>;
 	};
 
+	pinctrl_usbc_det: gpio-usbc-det {
+		fsl,pins = <
+			MX7D_PAD_ENET1_CRS__GPIO7_IO14	0x14
+		>;
+	};
+
 	pinctrl_usbh_reg: gpio-usbh-vbus {
 		fsl,pins = <
 			MX7D_PAD_UART3_CTS_B__GPIO4_IO7	0x14 /* SODIMM 129 USBH PEN */