[2/3] i2c: qcom-geni: Grow a dev pointer to simplify code
diff mbox series

Message ID 20200204193152.124980-3-swboyd@chromium.org
State Superseded
Headers show
Series
  • Misc qcom geni i2c driver fixes
Related show

Commit Message

Stephen Boyd Feb. 4, 2020, 7:31 p.m. UTC
Some lines are long here. Use a struct dev pointer to shorten lines and
simplify code. The clk_get() call can fail because of EPROBE_DEFER
problems too, so just remove the error print message because it isn't
useful.

Cc: Girish Mahadevan <girishm@codeaurora.org>
Cc: Dilip Kota <dkota@codeaurora.org>
Cc: Alok Chauhan <alokc@codeaurora.org>
Cc: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
---
 drivers/i2c/busses/i2c-qcom-geni.c | 51 ++++++++++++++----------------
 1 file changed, 24 insertions(+), 27 deletions(-)

Comments

Brendan Higgins Feb. 4, 2020, 9:14 p.m. UTC | #1
On Tue, Feb 4, 2020 at 11:32 AM Stephen Boyd <swboyd@chromium.org> wrote:
>
> Some lines are long here. Use a struct dev pointer to shorten lines and
> simplify code. The clk_get() call can fail because of EPROBE_DEFER
> problems too, so just remove the error print message because it isn't
> useful.
>
> Cc: Girish Mahadevan <girishm@codeaurora.org>
> Cc: Dilip Kota <dkota@codeaurora.org>
> Cc: Alok Chauhan <alokc@codeaurora.org>
> Cc: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>

I personally am indifferent to &pdev->dev vs. just dev, but not
printing an error in the case of a defer is a definite improvement.

Reviewed-by: Brendan Higgins <brendanhiggins@google.com>
Doug Anderson Feb. 4, 2020, 9:18 p.m. UTC | #2
Hi,

On Tue, Feb 4, 2020 at 11:31 AM Stephen Boyd <swboyd@chromium.org> wrote:
>
> Some lines are long here. Use a struct dev pointer to shorten lines and
> simplify code. The clk_get() call can fail because of EPROBE_DEFER
> problems too, so just remove the error print message because it isn't
> useful.
>
> Cc: Girish Mahadevan <girishm@codeaurora.org>
> Cc: Dilip Kota <dkota@codeaurora.org>
> Cc: Alok Chauhan <alokc@codeaurora.org>
> Cc: Douglas Anderson <dianders@chromium.org>
> Signed-off-by: Stephen Boyd <swboyd@chromium.org>
> ---
>  drivers/i2c/busses/i2c-qcom-geni.c | 51 ++++++++++++++----------------
>  1 file changed, 24 insertions(+), 27 deletions(-)
>
> diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
> index 3e13b54ce3f8..192a8f622f3d 100644
> --- a/drivers/i2c/busses/i2c-qcom-geni.c
> +++ b/drivers/i2c/busses/i2c-qcom-geni.c
> @@ -502,45 +502,42 @@ static int geni_i2c_probe(struct platform_device *pdev)
>         struct resource *res;
>         u32 proto, tx_depth;
>         int ret;
> +       struct device *dev = &pdev->dev;
>
> -       gi2c = devm_kzalloc(&pdev->dev, sizeof(*gi2c), GFP_KERNEL);
> +       gi2c = devm_kzalloc(dev, sizeof(*gi2c), GFP_KERNEL);
>         if (!gi2c)
>                 return -ENOMEM;
>
> -       gi2c->se.dev = &pdev->dev;
> -       gi2c->se.wrapper = dev_get_drvdata(pdev->dev.parent);
> +       gi2c->se.dev = dev;
> +       gi2c->se.wrapper = dev_get_drvdata(dev->parent);
>         res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> -       gi2c->se.base = devm_ioremap_resource(&pdev->dev, res);
> +       gi2c->se.base = devm_ioremap_resource(dev, res);
>         if (IS_ERR(gi2c->se.base))
>                 return PTR_ERR(gi2c->se.base);
>
> -       gi2c->se.clk = devm_clk_get(&pdev->dev, "se");
> -       if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(&pdev->dev)) {
> +       gi2c->se.clk = devm_clk_get(dev, "se");
> +       if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(dev)) {
>                 ret = PTR_ERR(gi2c->se.clk);
> -               dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret);
>                 return ret;
>         }

As with my response to your similar SPI change [1], there are cases
where this print could have informed us about other errors besides
EPROBE_DEFER, but it does seem rather unlikely so I'm OK w/ your
change.

I'm wondering why you didn't further clean this up, though.  You could
have fully gotten rid of the braces by just doing:

return PTR_ERR(gi2c->se.clk);


> -       ret = device_property_read_u32(&pdev->dev, "clock-frequency",
> -                                                       &gi2c->clk_freq_out);
> +       ret = device_property_read_u32(dev, "clock-frequency",
> +                                      &gi2c->clk_freq_out);
>         if (ret) {
> -               dev_info(&pdev->dev,
> -                       "Bus frequency not specified, default to 100kHz.\n");
> +               dev_info(dev, "Bus frequency not specified, default to 100kHz.\n");
>                 gi2c->clk_freq_out = KHZ(100);
>         }
>
> -       if (has_acpi_companion(&pdev->dev))
> -               ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(&pdev->dev));
> +       if (has_acpi_companion(dev))
> +               ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(dev));
>
>         gi2c->irq = platform_get_irq(pdev, 0);
> -       if (gi2c->irq < 0) {
> -               dev_err(&pdev->dev, "IRQ error for i2c-geni\n");
> +       if (gi2c->irq < 0)

Commit message doesn't mention removing this print, though checking
platform_get_irq() it looks like it already spams in the case where a
non-EPROBE_DEFER error is returned so I think you're good.

[1] https://lore.kernel.org/r/CAD=FV=U6Yiv5i4PdDFqNhp0STqAvVi_=F_iuKyonx=MsOQFABQ@mail.gmail.com


In any case above things aren't terribly important, so:

Reviewed-by: Douglas Anderson <dianders@chromium.org>

Patch
diff mbox series

diff --git a/drivers/i2c/busses/i2c-qcom-geni.c b/drivers/i2c/busses/i2c-qcom-geni.c
index 3e13b54ce3f8..192a8f622f3d 100644
--- a/drivers/i2c/busses/i2c-qcom-geni.c
+++ b/drivers/i2c/busses/i2c-qcom-geni.c
@@ -502,45 +502,42 @@  static int geni_i2c_probe(struct platform_device *pdev)
 	struct resource *res;
 	u32 proto, tx_depth;
 	int ret;
+	struct device *dev = &pdev->dev;
 
-	gi2c = devm_kzalloc(&pdev->dev, sizeof(*gi2c), GFP_KERNEL);
+	gi2c = devm_kzalloc(dev, sizeof(*gi2c), GFP_KERNEL);
 	if (!gi2c)
 		return -ENOMEM;
 
-	gi2c->se.dev = &pdev->dev;
-	gi2c->se.wrapper = dev_get_drvdata(pdev->dev.parent);
+	gi2c->se.dev = dev;
+	gi2c->se.wrapper = dev_get_drvdata(dev->parent);
 	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	gi2c->se.base = devm_ioremap_resource(&pdev->dev, res);
+	gi2c->se.base = devm_ioremap_resource(dev, res);
 	if (IS_ERR(gi2c->se.base))
 		return PTR_ERR(gi2c->se.base);
 
-	gi2c->se.clk = devm_clk_get(&pdev->dev, "se");
-	if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(&pdev->dev)) {
+	gi2c->se.clk = devm_clk_get(dev, "se");
+	if (IS_ERR(gi2c->se.clk) && !has_acpi_companion(dev)) {
 		ret = PTR_ERR(gi2c->se.clk);
-		dev_err(&pdev->dev, "Err getting SE Core clk %d\n", ret);
 		return ret;
 	}
 
-	ret = device_property_read_u32(&pdev->dev, "clock-frequency",
-							&gi2c->clk_freq_out);
+	ret = device_property_read_u32(dev, "clock-frequency",
+				       &gi2c->clk_freq_out);
 	if (ret) {
-		dev_info(&pdev->dev,
-			"Bus frequency not specified, default to 100kHz.\n");
+		dev_info(dev, "Bus frequency not specified, default to 100kHz.\n");
 		gi2c->clk_freq_out = KHZ(100);
 	}
 
-	if (has_acpi_companion(&pdev->dev))
-		ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(&pdev->dev));
+	if (has_acpi_companion(dev))
+		ACPI_COMPANION_SET(&gi2c->adap.dev, ACPI_COMPANION(dev));
 
 	gi2c->irq = platform_get_irq(pdev, 0);
-	if (gi2c->irq < 0) {
-		dev_err(&pdev->dev, "IRQ error for i2c-geni\n");
+	if (gi2c->irq < 0)
 		return gi2c->irq;
-	}
 
 	ret = geni_i2c_clk_map_idx(gi2c);
 	if (ret) {
-		dev_err(&pdev->dev, "Invalid clk frequency %d Hz: %d\n",
+		dev_err(dev, "Invalid clk frequency %d Hz: %d\n",
 			gi2c->clk_freq_out, ret);
 		return ret;
 	}
@@ -550,28 +547,28 @@  static int geni_i2c_probe(struct platform_device *pdev)
 	spin_lock_init(&gi2c->lock);
 	platform_set_drvdata(pdev, gi2c);
 	ret = devm_request_irq(dev, gi2c->irq, geni_i2c_irq, 0,
-			       dev_name(&pdev->dev), gi2c);
+			       dev_name(dev), gi2c);
 	if (ret) {
-		dev_err(&pdev->dev, "Request_irq failed:%d: err:%d\n",
+		dev_err(dev, "Request_irq failed:%d: err:%d\n",
 			gi2c->irq, ret);
 		return ret;
 	}
 	/* Disable the interrupt so that the system can enter low-power mode */
 	disable_irq(gi2c->irq);
 	i2c_set_adapdata(&gi2c->adap, gi2c);
-	gi2c->adap.dev.parent = &pdev->dev;
-	gi2c->adap.dev.of_node = pdev->dev.of_node;
+	gi2c->adap.dev.parent = dev;
+	gi2c->adap.dev.of_node = dev->of_node;
 	strlcpy(gi2c->adap.name, "Geni-I2C", sizeof(gi2c->adap.name));
 
 	ret = geni_se_resources_on(&gi2c->se);
 	if (ret) {
-		dev_err(&pdev->dev, "Error turning on resources %d\n", ret);
+		dev_err(dev, "Error turning on resources %d\n", ret);
 		return ret;
 	}
 	proto = geni_se_read_proto(&gi2c->se);
 	tx_depth = geni_se_get_tx_fifo_depth(&gi2c->se);
 	if (proto != GENI_SE_I2C) {
-		dev_err(&pdev->dev, "Invalid proto %d\n", proto);
+		dev_err(dev, "Invalid proto %d\n", proto);
 		geni_se_resources_off(&gi2c->se);
 		return -ENXIO;
 	}
@@ -581,11 +578,11 @@  static int geni_i2c_probe(struct platform_device *pdev)
 							true, true, true);
 	ret = geni_se_resources_off(&gi2c->se);
 	if (ret) {
-		dev_err(&pdev->dev, "Error turning off resources %d\n", ret);
+		dev_err(dev, "Error turning off resources %d\n", ret);
 		return ret;
 	}
 
-	dev_dbg(&pdev->dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
+	dev_dbg(dev, "i2c fifo/se-dma mode. fifo depth:%d\n", tx_depth);
 
 	gi2c->suspended = 1;
 	pm_runtime_set_suspended(gi2c->se.dev);
@@ -595,12 +592,12 @@  static int geni_i2c_probe(struct platform_device *pdev)
 
 	ret = i2c_add_adapter(&gi2c->adap);
 	if (ret) {
-		dev_err(&pdev->dev, "Error adding i2c adapter %d\n", ret);
+		dev_err(dev, "Error adding i2c adapter %d\n", ret);
 		pm_runtime_disable(gi2c->se.dev);
 		return ret;
 	}
 
-	dev_dbg(&pdev->dev, "Geni-I2C adaptor successfully added\n");
+	dev_dbg(dev, "Geni-I2C adaptor successfully added\n");
 
 	return 0;
 }