[Intel-gfx,v6,1/7] drm/i915/display/cdclk: Make WARN* drm specific where drm_priv ptr is available
diff mbox series

Message ID 20200205173419.1695-2-pankaj.laxminarayan.bharadiya@intel.com
State New
Headers show
Series
  • drm: Introduce struct drm_device based WARN* and use them in i915
Related show

Commit Message

Pankaj Bharadiya Feb. 5, 2020, 5:34 p.m. UTC
drm specific WARN* calls include device information in the
backtrace, so we know what device the warnings originate from.

Covert all the calls of WARN* with device specific drm_WARN*
variants in functions where drm_i915_private struct pointer is readily
available.

The conversion was done automatically with below coccinelle semantic
patch. checkpatch errors/warnings are fixed manually.

@rule1@
identifier func, T;
@@
func(...) {
...
struct drm_i915_private *T = ...;
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

@rule2@
identifier func, T;
@@
func(struct drm_i915_private *T,...) {
<+...
(
-WARN(
+drm_WARN(&T->drm,
...)
|
-WARN_ON(
+drm_WARN_ON(&T->drm,
...)
|
-WARN_ONCE(
+drm_WARN_ONCE(&T->drm,
...)
|
-WARN_ON_ONCE(
+drm_WARN_ON_ONCE(&T->drm,
...)
)
...+>
}

Signed-off-by: Pankaj Bharadiya <pankaj.laxminarayan.bharadiya@intel.com>
---
 drivers/gpu/drm/i915/display/intel_cdclk.c | 85 +++++++++++++---------
 1 file changed, 49 insertions(+), 36 deletions(-)

Patch
diff mbox series

diff --git a/drivers/gpu/drm/i915/display/intel_cdclk.c b/drivers/gpu/drm/i915/display/intel_cdclk.c
index 7154a2288310..9c97d230720a 100644
--- a/drivers/gpu/drm/i915/display/intel_cdclk.c
+++ b/drivers/gpu/drm/i915/display/intel_cdclk.c
@@ -525,7 +525,8 @@  static void vlv_program_pfi_credits(struct drm_i915_private *dev_priv)
 	 * FIXME is this guaranteed to clear
 	 * immediately or should we poll for it?
 	 */
-	WARN_ON(intel_de_read(dev_priv, GCI_CONTROL) & PFI_CREDIT_RESEND);
+	drm_WARN_ON(&dev_priv->drm,
+		    intel_de_read(dev_priv, GCI_CONTROL) & PFI_CREDIT_RESEND);
 }
 
 static void vlv_set_cdclk(struct drm_i915_private *dev_priv,
@@ -727,12 +728,14 @@  static void bdw_set_cdclk(struct drm_i915_private *dev_priv,
 	u32 val;
 	int ret;
 
-	if (WARN((intel_de_read(dev_priv, LCPLL_CTL) &
-		  (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
-		   LCPLL_CD_CLOCK_DISABLE | LCPLL_ROOT_CD_CLOCK_DISABLE |
-		   LCPLL_CD2X_CLOCK_DISABLE | LCPLL_POWER_DOWN_ALLOW |
-		   LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
-		 "trying to change cdclk frequency with cdclk not enabled\n"))
+	if (drm_WARN(&dev_priv->drm, (intel_de_read(dev_priv, LCPLL_CTL) &
+				      (LCPLL_PLL_DISABLE | LCPLL_PLL_LOCK |
+				       LCPLL_CD_CLOCK_DISABLE |
+				       LCPLL_ROOT_CD_CLOCK_DISABLE |
+				       LCPLL_CD2X_CLOCK_DISABLE |
+				       LCPLL_POWER_DOWN_ALLOW |
+				       LCPLL_CD_SOURCE_FCLK)) != LCPLL_PLL_LOCK,
+		     "trying to change cdclk frequency with cdclk not enabled\n"))
 		return;
 
 	ret = sandybridge_pcode_write(dev_priv,
@@ -842,15 +845,16 @@  static void skl_dpll0_update(struct drm_i915_private *dev_priv,
 	if ((val & LCPLL_PLL_ENABLE) == 0)
 		return;
 
-	if (WARN_ON((val & LCPLL_PLL_LOCK) == 0))
+	if (drm_WARN_ON(&dev_priv->drm, (val & LCPLL_PLL_LOCK) == 0))
 		return;
 
 	val = intel_de_read(dev_priv, DPLL_CTRL1);
 
-	if (WARN_ON((val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) |
-			    DPLL_CTRL1_SSC(SKL_DPLL0) |
-			    DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) !=
-		    DPLL_CTRL1_OVERRIDE(SKL_DPLL0)))
+	if (drm_WARN_ON(&dev_priv->drm,
+			(val & (DPLL_CTRL1_HDMI_MODE(SKL_DPLL0) |
+				DPLL_CTRL1_SSC(SKL_DPLL0) |
+				DPLL_CTRL1_OVERRIDE(SKL_DPLL0))) !=
+			DPLL_CTRL1_OVERRIDE(SKL_DPLL0)))
 		return;
 
 	switch (val & DPLL_CTRL1_LINK_RATE_MASK(SKL_DPLL0)) {
@@ -952,7 +956,7 @@  static void skl_dpll0_enable(struct drm_i915_private *dev_priv, int vco)
 {
 	u32 val;
 
-	WARN_ON(vco != 8100000 && vco != 8640000);
+	drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000);
 
 	/*
 	 * We always enable DPLL0 with the lowest link rate possible, but still
@@ -1017,7 +1021,8 @@  static void skl_set_cdclk(struct drm_i915_private *dev_priv,
 	 * use the corresponding VCO freq as that always leads to using the
 	 * minimum 308MHz CDCLK.
 	 */
-	WARN_ON_ONCE(IS_SKYLAKE(dev_priv) && vco == 8640000);
+	drm_WARN_ON_ONCE(&dev_priv->drm,
+			 IS_SKYLAKE(dev_priv) && vco == 8640000);
 
 	ret = skl_pcode_request(dev_priv, SKL_PCODE_CDCLK_CONTROL,
 				SKL_CDCLK_PREPARE_FOR_CHANGE,
@@ -1032,8 +1037,9 @@  static void skl_set_cdclk(struct drm_i915_private *dev_priv,
 	/* Choose frequency for this cdclk */
 	switch (cdclk) {
 	default:
-		WARN_ON(cdclk != dev_priv->cdclk.hw.bypass);
-		WARN_ON(vco != 0);
+		drm_WARN_ON(&dev_priv->drm,
+			    cdclk != dev_priv->cdclk.hw.bypass);
+		drm_WARN_ON(&dev_priv->drm, vco != 0);
 		/* fall through */
 	case 308571:
 	case 337500:
@@ -1235,8 +1241,9 @@  static int bxt_calc_cdclk(struct drm_i915_private *dev_priv, int min_cdclk)
 		    table[i].cdclk >= min_cdclk)
 			return table[i].cdclk;
 
-	WARN(1, "Cannot satisfy minimum cdclk %d with refclk %u\n",
-	     min_cdclk, dev_priv->cdclk.hw.ref);
+	drm_WARN(&dev_priv->drm, 1,
+		 "Cannot satisfy minimum cdclk %d with refclk %u\n",
+		 min_cdclk, dev_priv->cdclk.hw.ref);
 	return 0;
 }
 
@@ -1253,8 +1260,8 @@  static int bxt_calc_cdclk_pll_vco(struct drm_i915_private *dev_priv, int cdclk)
 		    table[i].cdclk == cdclk)
 			return dev_priv->cdclk.hw.ref * table[i].ratio;
 
-	WARN(1, "cdclk %d not valid for refclk %u\n",
-	     cdclk, dev_priv->cdclk.hw.ref);
+	drm_WARN(&dev_priv->drm, 1, "cdclk %d not valid for refclk %u\n",
+		 cdclk, dev_priv->cdclk.hw.ref);
 	return 0;
 }
 
@@ -1387,15 +1394,17 @@  static void bxt_get_cdclk(struct drm_i915_private *dev_priv,
 		div = 2;
 		break;
 	case BXT_CDCLK_CD2X_DIV_SEL_1_5:
-		WARN(IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10,
-		     "Unsupported divider\n");
+		drm_WARN(&dev_priv->drm,
+			 IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10,
+			 "Unsupported divider\n");
 		div = 3;
 		break;
 	case BXT_CDCLK_CD2X_DIV_SEL_2:
 		div = 4;
 		break;
 	case BXT_CDCLK_CD2X_DIV_SEL_4:
-		WARN(INTEL_GEN(dev_priv) >= 10, "Unsupported divider\n");
+		drm_WARN(&dev_priv->drm, INTEL_GEN(dev_priv) >= 10,
+			 "Unsupported divider\n");
 		div = 8;
 		break;
 	default:
@@ -1535,22 +1544,25 @@  static void bxt_set_cdclk(struct drm_i915_private *dev_priv,
 	/* cdclk = vco / 2 / div{1,1.5,2,4} */
 	switch (DIV_ROUND_CLOSEST(vco, cdclk)) {
 	default:
-		WARN_ON(cdclk != dev_priv->cdclk.hw.bypass);
-		WARN_ON(vco != 0);
+		drm_WARN_ON(&dev_priv->drm,
+			    cdclk != dev_priv->cdclk.hw.bypass);
+		drm_WARN_ON(&dev_priv->drm, vco != 0);
 		/* fall through */
 	case 2:
 		divider = BXT_CDCLK_CD2X_DIV_SEL_1;
 		break;
 	case 3:
-		WARN(IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10,
-		     "Unsupported divider\n");
+		drm_WARN(&dev_priv->drm,
+			 IS_GEMINILAKE(dev_priv) || INTEL_GEN(dev_priv) >= 10,
+			 "Unsupported divider\n");
 		divider = BXT_CDCLK_CD2X_DIV_SEL_1_5;
 		break;
 	case 4:
 		divider = BXT_CDCLK_CD2X_DIV_SEL_2;
 		break;
 	case 8:
-		WARN(INTEL_GEN(dev_priv) >= 10, "Unsupported divider\n");
+		drm_WARN(&dev_priv->drm, INTEL_GEN(dev_priv) >= 10,
+			 "Unsupported divider\n");
 		divider = BXT_CDCLK_CD2X_DIV_SEL_4;
 		break;
 	}
@@ -1848,15 +1860,16 @@  static void intel_set_cdclk(struct drm_i915_private *dev_priv,
 	if (!intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config))
 		return;
 
-	if (WARN_ON_ONCE(!dev_priv->display.set_cdclk))
+	if (drm_WARN_ON_ONCE(&dev_priv->drm, !dev_priv->display.set_cdclk))
 		return;
 
 	intel_dump_cdclk_config(cdclk_config, "Changing CDCLK to");
 
 	dev_priv->display.set_cdclk(dev_priv, cdclk_config, pipe);
 
-	if (WARN(intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config),
-		 "cdclk state doesn't match!\n")) {
+	if (drm_WARN(&dev_priv->drm,
+		     intel_cdclk_changed(&dev_priv->cdclk.hw, cdclk_config),
+		     "cdclk state doesn't match!\n")) {
 		intel_dump_cdclk_config(&dev_priv->cdclk.hw, "[hw state]");
 		intel_dump_cdclk_config(cdclk_config, "[sw state]");
 	}
@@ -1885,7 +1898,7 @@  intel_set_cdclk_pre_plane_update(struct intel_atomic_state *state)
 
 	if (pipe == INVALID_PIPE ||
 	    old_cdclk_state->actual.cdclk <= new_cdclk_state->actual.cdclk) {
-		WARN_ON(!new_cdclk_state->base.changed);
+		drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed);
 
 		intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe);
 	}
@@ -1914,7 +1927,7 @@  intel_set_cdclk_post_plane_update(struct intel_atomic_state *state)
 
 	if (pipe != INVALID_PIPE &&
 	    old_cdclk_state->actual.cdclk > new_cdclk_state->actual.cdclk) {
-		WARN_ON(!new_cdclk_state->base.changed);
+		drm_WARN_ON(&dev_priv->drm, !new_cdclk_state->base.changed);
 
 		intel_set_cdclk(dev_priv, &new_cdclk_state->actual, pipe);
 	}
@@ -2538,7 +2551,7 @@  void intel_update_max_cdclk(struct drm_i915_private *dev_priv)
 		int max_cdclk, vco;
 
 		vco = dev_priv->skl_preferred_vco_freq;
-		WARN_ON(vco != 8100000 && vco != 8640000);
+		drm_WARN_ON(&dev_priv->drm, vco != 8100000 && vco != 8640000);
 
 		/*
 		 * Use the lower (vco 8640) cdclk values as a
@@ -2791,8 +2804,8 @@  void intel_init_cdclk_hooks(struct drm_i915_private *dev_priv)
 	else if (IS_I845G(dev_priv))
 		dev_priv->display.get_cdclk = fixed_200mhz_get_cdclk;
 	else { /* 830 */
-		WARN(!IS_I830(dev_priv),
-		     "Unknown platform. Assuming 133 MHz CDCLK\n");
+		drm_WARN(&dev_priv->drm, !IS_I830(dev_priv),
+			 "Unknown platform. Assuming 133 MHz CDCLK\n");
 		dev_priv->display.get_cdclk = fixed_133mhz_get_cdclk;
 	}
 }