[v2] dmaengine: ti: edma: Support for interleaved mem to mem transfer
diff mbox series

Message ID 20200210094455.3615-1-peter.ujfalusi@ti.com
State Accepted
Headers show
Series
  • [v2] dmaengine: ti: edma: Support for interleaved mem to mem transfer
Related show

Commit Message

Peter Ujfalusi Feb. 10, 2020, 9:44 a.m. UTC
Add basic interleaved support via EDMA.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
Hi,

Changes since v1:
- No need to configure link_bcntrld as the link is set in edma_execute

Regards,
Peter

 drivers/dma/ti/edma.c | 79 +++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 79 insertions(+)

Comments

Vinod Koul Feb. 25, 2020, 6:09 a.m. UTC | #1
On 10-02-20, 11:44, Peter Ujfalusi wrote:
> Add basic interleaved support via EDMA.

Applied, thanks

Patch
diff mbox series

diff --git a/drivers/dma/ti/edma.c b/drivers/dma/ti/edma.c
index 03a7f647f7b2..2b1fdd438e7f 100644
--- a/drivers/dma/ti/edma.c
+++ b/drivers/dma/ti/edma.c
@@ -1275,6 +1275,81 @@  static struct dma_async_tx_descriptor *edma_prep_dma_memcpy(
 	return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
 }
 
+static struct dma_async_tx_descriptor *
+edma_prep_dma_interleaved(struct dma_chan *chan,
+			  struct dma_interleaved_template *xt,
+			  unsigned long tx_flags)
+{
+	struct device *dev = chan->device->dev;
+	struct edma_chan *echan = to_edma_chan(chan);
+	struct edmacc_param *param;
+	struct edma_desc *edesc;
+	size_t src_icg, dst_icg;
+	int src_bidx, dst_bidx;
+
+	/* Slave mode is not supported */
+	if (is_slave_direction(xt->dir))
+		return NULL;
+
+	if (xt->frame_size != 1 || xt->numf == 0)
+		return NULL;
+
+	if (xt->sgl[0].size > SZ_64K || xt->numf > SZ_64K)
+		return NULL;
+
+	src_icg = dmaengine_get_src_icg(xt, &xt->sgl[0]);
+	if (src_icg) {
+		src_bidx = src_icg + xt->sgl[0].size;
+	} else if (xt->src_inc) {
+		src_bidx = xt->sgl[0].size;
+	} else {
+		dev_err(dev, "%s: SRC constant addressing is not supported\n",
+			__func__);
+		return NULL;
+	}
+
+	dst_icg = dmaengine_get_dst_icg(xt, &xt->sgl[0]);
+	if (dst_icg) {
+		dst_bidx = dst_icg + xt->sgl[0].size;
+	} else if (xt->dst_inc) {
+		dst_bidx = xt->sgl[0].size;
+	} else {
+		dev_err(dev, "%s: DST constant addressing is not supported\n",
+			__func__);
+		return NULL;
+	}
+
+	if (src_bidx > SZ_64K || dst_bidx > SZ_64K)
+		return NULL;
+
+	edesc = kzalloc(struct_size(edesc, pset, 1), GFP_ATOMIC);
+	if (!edesc)
+		return NULL;
+
+	edesc->direction = DMA_MEM_TO_MEM;
+	edesc->echan = echan;
+	edesc->pset_nr = 1;
+
+	param = &edesc->pset[0].param;
+
+	param->src = xt->src_start;
+	param->dst = xt->dst_start;
+	param->a_b_cnt = xt->numf << 16 | xt->sgl[0].size;
+	param->ccnt = 1;
+	param->src_dst_bidx = (dst_bidx << 16) | src_bidx;
+	param->src_dst_cidx = 0;
+
+	param->opt = EDMA_TCC(EDMA_CHAN_SLOT(echan->ch_num));
+	param->opt |= ITCCHEN;
+	/* Enable transfer complete interrupt if requested */
+	if (tx_flags & DMA_PREP_INTERRUPT)
+		param->opt |= TCINTEN;
+	else
+		edesc->polled = true;
+
+	return vchan_tx_prep(&echan->vchan, &edesc->vdesc, tx_flags);
+}
+
 static struct dma_async_tx_descriptor *edma_prep_dma_cyclic(
 	struct dma_chan *chan, dma_addr_t buf_addr, size_t buf_len,
 	size_t period_len, enum dma_transfer_direction direction,
@@ -1917,7 +1992,9 @@  static void edma_dma_init(struct edma_cc *ecc, bool legacy_mode)
 			 "Legacy memcpy is enabled, things might not work\n");
 
 		dma_cap_set(DMA_MEMCPY, s_ddev->cap_mask);
+		dma_cap_set(DMA_INTERLEAVE, m_ddev->cap_mask);
 		s_ddev->device_prep_dma_memcpy = edma_prep_dma_memcpy;
+		s_ddev->device_prep_interleaved_dma = edma_prep_dma_interleaved;
 		s_ddev->directions = BIT(DMA_MEM_TO_MEM);
 	}
 
@@ -1953,8 +2030,10 @@  static void edma_dma_init(struct edma_cc *ecc, bool legacy_mode)
 
 		dma_cap_zero(m_ddev->cap_mask);
 		dma_cap_set(DMA_MEMCPY, m_ddev->cap_mask);
+		dma_cap_set(DMA_INTERLEAVE, m_ddev->cap_mask);
 
 		m_ddev->device_prep_dma_memcpy = edma_prep_dma_memcpy;
+		m_ddev->device_prep_interleaved_dma = edma_prep_dma_interleaved;
 		m_ddev->device_alloc_chan_resources = edma_alloc_chan_resources;
 		m_ddev->device_free_chan_resources = edma_free_chan_resources;
 		m_ddev->device_issue_pending = edma_issue_pending;