diff mbox series

[v8,1/3] dt-bindings: phy: Add Amlogic A1 USB2 PHY Bindings

Message ID 1581419454-12667-2-git-send-email-hanjie.lin@amlogic.com (mailing list archive)
State Superseded
Headers show
Series arm64: meson: Add support for USB on Amlogic A1 | expand

Commit Message

Hanjie Lin Feb. 11, 2020, 11:10 a.m. UTC 
Add the Amlogic A1 Family USB2 PHY Bindings

It supports Host mode only.

Signed-off-by: Yue Wang <yue.wang@amlogic.com>
Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/phy/amlogic,meson-g12a-usb2-phy.yaml         | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Jerome Brunet Feb. 11, 2020, 12:16 p.m. UTC | #1 
On Tue 11 Feb 2020 at 12:10, Hanjie Lin <hanjie.lin@amlogic.com> wrote:

> Add the Amlogic A1 Family USB2 PHY Bindings
>
> It supports Host mode only.
>
> Signed-off-by: Yue Wang <yue.wang@amlogic.com>
> Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>  .../bindings/phy/amlogic,meson-g12a-usb2-phy.yaml         | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
> index 57d8603..3b7e763 100644
> --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
> @@ -14,6 +14,7 @@ properties:
>    compatible:
>      enum:
>        - amlogic,meson-g12a-usb2-phy
> +      - amlogic,meson-a1-usb2-phy
>  
>    reg:
>      maxItems: 1
> @@ -49,6 +50,20 @@ required:
>    - reset-names
>    - "#phy-cells"
>  
> +allOf:

Is 'allOf' really needed when there is only one if clause ?

> +  - if:
> +      properties:
> +        compatible:
> +          enum:
> +            - amlogic,meson-a1-usb-ctrl
> +
> +    then:
> +      properties:
> +        power-domains:
> +          maxItems: 1
> +      required:
> +        - power-domains
> +
>  examples:
>    - |
>      phy@36000 {
Hanjie Lin Feb. 12, 2020, 7:33 a.m. UTC | #2 
On 2020/2/11 20:16, Jerome Brunet wrote:
> 
> On Tue 11 Feb 2020 at 12:10, Hanjie Lin <hanjie.lin@amlogic.com> wrote:
> 
>> Add the Amlogic A1 Family USB2 PHY Bindings
>>
>> It supports Host mode only.
>>
>> Signed-off-by: Yue Wang <yue.wang@amlogic.com>
>> Signed-off-by: Hanjie Lin <hanjie.lin@amlogic.com>
>> Reviewed-by: Rob Herring <robh@kernel.org>
>> ---
>>  .../bindings/phy/amlogic,meson-g12a-usb2-phy.yaml         | 15 +++++++++++++++
>>  1 file changed, 15 insertions(+)
>>
>> diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
>> index 57d8603..3b7e763 100644
>> --- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
>> +++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
>> @@ -14,6 +14,7 @@ properties:
>>    compatible:
>>      enum:
>>        - amlogic,meson-g12a-usb2-phy
>> +      - amlogic,meson-a1-usb2-phy
>>  
>>    reg:
>>      maxItems: 1
>> @@ -49,6 +50,20 @@ required:
>>    - reset-names
>>    - "#phy-cells"
>>  
>> +allOf:
> 
> Is 'allOf' really needed when there is only one if clause ?
> 

Hi jerome:

Yes, this 'allOf' is not necessary here.
I will remove it.

Thanks,
Hanjie

>> +  - if:
>> +      properties:
>> +        compatible:
>> +          enum:
>> +            - amlogic,meson-a1-usb-ctrl
>> +
>> +    then:
>> +      properties:
>> +        power-domains:
>> +          maxItems: 1
>> +      required:
>> +        - power-domains
>> +
>>  examples:
>>    - |
>>      phy@36000 {
> 
> .
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
index 57d8603..3b7e763 100644
--- a/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/amlogic,meson-g12a-usb2-phy.yaml
@@ -14,6 +14,7 @@  properties:
   compatible:
     enum:
       - amlogic,meson-g12a-usb2-phy
+      - amlogic,meson-a1-usb2-phy
 
   reg:
     maxItems: 1
@@ -49,6 +50,20 @@  required:
   - reset-names
   - "#phy-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-a1-usb-ctrl
+
+    then:
+      properties:
+        power-domains:
+          maxItems: 1
+      required:
+        - power-domains
+
 examples:
   - |
     phy@36000 {