From patchwork Wed Feb 12 08:41:43 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: "Wang, Jiada" X-Patchwork-Id: 11377937 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 20057921 for ; Wed, 12 Feb 2020 08:45:17 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id EAB3120873 for ; Wed, 12 Feb 2020 08:45:16 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1728578AbgBLIpQ (ORCPT ); Wed, 12 Feb 2020 03:45:16 -0500 Received: from esa2.mentor.iphmx.com ([68.232.141.98]:34452 "EHLO esa2.mentor.iphmx.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1728493AbgBLIpQ (ORCPT ); Wed, 12 Feb 2020 03:45:16 -0500 IronPort-SDR: 1AvjtLIkHXyDDtmuv5ZoCfKOsd2FpboyyxNTpT0yM71NAm0PRr8sbjZX7cRMX2mZsJpkErhMEE TYSGF5Jsb6Cxjntso0vxQsRK8MiQma26ekQ7iVt4FFJeAzvQFaX8dy5aunqOFHqG4TNIBEmRaX QE9dj6vL2lADEWdGQU8HtIcgNcsEEbdTxqwJ5AuPGLSAmkGV0jMcgaZxob+s+GVLzP9nO/Kgoi 5Lb5pQ4r7clisID3yDz0MW7chS6V4PvAM2Sfl35jqNlwcMGmK+ghxeKodcoaerbN2vV4naFENv lfg= X-IronPort-AV: E=Sophos;i="5.70,428,1574150400"; d="scan'208";a="45686195" Received: from orw-gwy-02-in.mentorg.com ([192.94.38.167]) by esa2.mentor.iphmx.com with ESMTP; 12 Feb 2020 00:44:13 -0800 IronPort-SDR: p8Umqz3e0MCYGAlUVNAxi/yKCqHmbErI4JNLD1ROQW0ltxZgalUy0g7488vCPRGAbjpHTFO0zp aYKPLyL9gTMaGHqCmGo5Ok4j17c1tOYC6cMISaxi38ACAomm0NmxJYXrFxxXaBJx7mtO79JG75 JzUH+l2x4RTncpZVF1sbV2qQt8lUWLcRPD2jbv8MmJ4M8jdk2a5cUHYenqojhlz/IXoaFzUr9d 68af1Z5NvWJb5JIf7yu1aZ6kctyvQbtBrI/kAP2QACVXcd6CEbN4n3Gn9JaSocB1SXG8B2ZRyI mpA= From: Jiada Wang To: , , , , , CC: , , , , Subject: [PATCH v7 13/48] Input: atmel_mxt_ts - add regulator control support Date: Wed, 12 Feb 2020 00:41:43 -0800 Message-ID: <20200212084218.32344-14-jiada_wang@mentor.com> X-Mailer: git-send-email 2.17.1 In-Reply-To: <20200212084218.32344-1-jiada_wang@mentor.com> References: <20200212084218.32344-1-jiada_wang@mentor.com> MIME-Version: 1.0 Sender: linux-input-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: linux-input@vger.kernel.org From: Nick Dyer Allow the driver to optionally manage enabling/disable power to the touch controller itself. If the regulators are not present then use the deep sleep power mode instead. For a correct power on sequence, it is required that we have control over the RESET line. Signed-off-by: Nick Dyer Acked-by: Benson Leung Acked-by: Yufeng Shen (cherry picked from ndyer/linux/for-upstream commit 14052b61bb66c2f2283c00e733e131be7a9b8bfc) [gdavis: Resolve forward port conflicts due to v4.14-rc1 commmit f657b00df22e ("Input: atmel_mxt_ts - add support for reset line") and applying upstream commit 96a938aa214e ("Input: atmel_mxt_ts - remove platform data support").] Signed-off-by: George G. Davis [gdavis: Squash fixes from Dirk Behme: - Input: atmel_mxt_ts - in failure case disable the regulator - Input: atmel_mxt_ts - disable only enabled regulators - Input: atmel_mxt_ts - use devm_regulator_get()] Signed-off-by: Dirk Behme --- .../bindings/input/atmel,maxtouch.txt | 6 + MAINTAINERS | 1 + drivers/input/touchscreen/atmel_mxt_ts.c | 129 ++++++++++++++++-- include/dt-bindings/input/atmel_mxt_ts.h | 22 +++ 4 files changed, 149 insertions(+), 9 deletions(-) create mode 100644 include/dt-bindings/input/atmel_mxt_ts.h diff --git a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt index c88919480d37..e28139ce3cae 100644 --- a/Documentation/devicetree/bindings/input/atmel,maxtouch.txt +++ b/Documentation/devicetree/bindings/input/atmel,maxtouch.txt @@ -31,6 +31,12 @@ Optional properties for main touchpad device: - reset-gpios: GPIO specifier for the touchscreen's reset pin (active low) +- atmel,suspend-mode: Select method used to suspend: + MXT_SUSPEND_DEEP_SLEEP - use T7 to suspend the device into deep sleep + MXT_SUSPEND_T9_CTRL - use T9.CTRL to turn off touch processing + MXT_SUSPEND_REGULATOR - use regulators to power down device during suspend + Definitions are in . + Example: touch@4b { diff --git a/MAINTAINERS b/MAINTAINERS index e48ab79879ac..350ae664e6f0 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2873,6 +2873,7 @@ T: git git://github.com/ndyer/linux.git S: Maintained F: Documentation/devicetree/bindings/input/atmel,maxtouch.txt F: drivers/input/touchscreen/atmel_mxt_ts.c +F: include/dt-bindings/input/atmel_mxt_ts.h ATMEL WIRELESS DRIVER M: Simon Kelley diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index 2bc34c14dbbf..7b2c62d46ef8 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -26,10 +26,12 @@ #include #include #include +#include #include #include #include #include +#include /* Firmware files */ #define MXT_FW_NAME "maxtouch.fw" @@ -215,6 +217,9 @@ enum t100_type { #define MXT_CRC_TIMEOUT 1000 /* msec */ #define MXT_FW_RESET_TIME 3000 /* msec */ #define MXT_FW_CHG_TIMEOUT 300 /* msec */ +#define MXT_REGULATOR_DELAY 150 /* msec */ +#define MXT_CHG_DELAY 100 /* msec */ +#define MXT_POWERON_DELAY 150 /* msec */ /* Command to unlock bootloader */ #define MXT_UNLOCK_CMD_MSB 0xaa @@ -275,11 +280,6 @@ enum v4l_dbg_inputs { MXT_V4L_INPUT_MAX, }; -enum mxt_suspend_mode { - MXT_SUSPEND_DEEP_SLEEP = 0, - MXT_SUSPEND_T9_CTRL = 1, -}; - /* Config update context */ struct mxt_cfg { u8 *raw; @@ -333,6 +333,8 @@ struct mxt_data { u8 stylus_aux_pressure; u8 stylus_aux_peak; bool use_retrigen_workaround; + struct regulator *reg_vdd; + struct regulator *reg_avdd; /* Cached parameters from object table */ u16 T5_address; @@ -2073,6 +2075,94 @@ static int mxt_read_info_block(struct mxt_data *data) return error; } +static void mxt_regulator_enable(struct mxt_data *data) +{ + int error; + + if (!data->reg_vdd || !data->reg_avdd) + return; + + gpiod_set_value(data->reset_gpio, 0); + + error = regulator_enable(data->reg_vdd); + if (error) + return; + + error = regulator_enable(data->reg_avdd); + if (error) { + regulator_disable(data->reg_vdd); + return; + } + + /* + * According to maXTouch power sequencing specification, RESET line + * must be kept low until some time after regulators come up to + * voltage + */ + msleep(MXT_REGULATOR_DELAY); + gpiod_set_value(data->reset_gpio, 1); + msleep(MXT_CHG_DELAY); + +retry_wait: + reinit_completion(&data->bl_completion); + data->in_bootloader = true; + error = mxt_wait_for_completion(data, &data->bl_completion, + MXT_POWERON_DELAY); + if (error == -EINTR) + goto retry_wait; + + data->in_bootloader = false; +} + +static void mxt_regulator_disable(struct mxt_data *data) +{ + if (!data->reg_vdd || !data->reg_avdd) + return; + + if (regulator_is_enabled(data->reg_vdd)) + regulator_disable(data->reg_vdd); + if (regulator_is_enabled(data->reg_avdd)) + regulator_disable(data->reg_avdd); +} + +static int mxt_probe_regulators(struct mxt_data *data) +{ + struct device *dev = &data->client->dev; + int error; + + /* Must have reset GPIO to use regulator support */ + if (!data->reset_gpio) { + error = -EINVAL; + goto fail; + } + + data->reg_vdd = devm_regulator_get(dev, "vdd"); + if (IS_ERR(data->reg_vdd)) { + error = PTR_ERR(data->reg_vdd); + dev_err(dev, "Error %d getting vdd regulator\n", error); + goto fail; + } + + data->reg_avdd = devm_regulator_get(dev, "avdd"); + if (IS_ERR(data->reg_avdd)) { + error = PTR_ERR(data->reg_avdd); + dev_err(dev, "Error %d getting avdd regulator\n", error); + goto fail_release; + } + + mxt_regulator_enable(data); + + dev_dbg(dev, "Initialised regulators\n"); + return 0; + +fail_release: + regulator_put(data->reg_vdd); +fail: + data->reg_vdd = NULL; + data->reg_avdd = NULL; + return error; +} + static int mxt_read_t9_resolution(struct mxt_data *data) { struct i2c_client *client = data->client; @@ -3139,7 +3229,12 @@ static int mxt_load_fw(struct device *dev, const char *fn) goto release_firmware; if (data->suspended) { - enable_irq(data->irq); + if (data->suspend_mode == MXT_SUSPEND_REGULATOR) + mxt_regulator_enable(data); + + if (data->suspend_mode == MXT_SUSPEND_DEEP_SLEEP) + enable_irq(data->irq); + data->suspended = false; } @@ -3345,6 +3440,11 @@ static void mxt_start(struct mxt_data *data) MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0x83); break; + case MXT_SUSPEND_REGULATOR: + enable_irq(data->irq); + mxt_regulator_enable(data); + break; + case MXT_SUSPEND_DEEP_SLEEP: default: /* @@ -3377,6 +3477,12 @@ static void mxt_stop(struct mxt_data *data) MXT_TOUCH_MULTI_T9, MXT_T9_CTRL, 0); break; + case MXT_SUSPEND_REGULATOR: + disable_irq(data->irq); + mxt_regulator_disable(data); + mxt_reset_slots(data); + break; + case MXT_SUSPEND_DEEP_SLEEP: default: disable_irq(data->irq); @@ -3469,6 +3575,7 @@ static int mxt_parse_device_properties(struct mxt_data *data) data->t15_num_keys = n_keys; } + device_property_read_u32(dev, "atmel,suspend-mode", &data->suspend_mode); return 0; } @@ -3555,14 +3662,18 @@ static int mxt_probe(struct i2c_client *client, const struct i2c_device_id *id) return error; } - disable_irq(client->irq); - - if (data->reset_gpio) { + if (data->suspend_mode == MXT_SUSPEND_REGULATOR) { + error = mxt_probe_regulators(data); + if (error) + return error; + } else if (data->reset_gpio) { msleep(MXT_RESET_GPIO_TIME); gpiod_set_value(data->reset_gpio, 1); msleep(MXT_RESET_INVALID_CHG); } + disable_irq(data->irq); + error = mxt_initialize(data); if (error) return error; diff --git a/include/dt-bindings/input/atmel_mxt_ts.h b/include/dt-bindings/input/atmel_mxt_ts.h new file mode 100644 index 000000000000..e4c4c0f6fa37 --- /dev/null +++ b/include/dt-bindings/input/atmel_mxt_ts.h @@ -0,0 +1,22 @@ +/* + * Atmel maXTouch Touchscreen driver + * + * Copyright (C) 2015 Atmel Corporation + * Author: Nick Dyer + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __DT_BINDINGS_ATMEL_MXT_TS_H +#define __DT_BINDINGS_ATMEL_MXT_TS_H + +enum mxt_suspend_mode { + MXT_SUSPEND_DEEP_SLEEP = 0, + MXT_SUSPEND_T9_CTRL = 1, + MXT_SUSPEND_REGULATOR = 2, +}; + +#endif /* __DT_BINDINGS_ATMEL_MXT_TS_H */