[v2] ASoC: dt-bindings: stm32: convert sai to json-schema
diff mbox series

Message ID 20200212131259.18805-1-olivier.moysan@st.com
State New
Headers show
Series
  • [v2] ASoC: dt-bindings: stm32: convert sai to json-schema
Related show

Commit Message

Olivier Moysan Feb. 12, 2020, 1:12 p.m. UTC
Convert the STM32 SAI bindings to DT schema format using json-schema.

Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
---
Changes in v2:
- use pattern for compatible of child nodes
- rework dmas and clocks properties
- add "additionalProperties"
---
 .../bindings/sound/st,stm32-sai.txt           | 107 ----------
 .../bindings/sound/st,stm32-sai.yaml          | 191 ++++++++++++++++++
 2 files changed, 191 insertions(+), 107 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt
 create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.yaml

Comments

Rob Herring Feb. 19, 2020, 3:25 p.m. UTC | #1
On Wed, Feb 12, 2020 at 02:12:59PM +0100, Olivier Moysan wrote:
> Convert the STM32 SAI bindings to DT schema format using json-schema.
> 
> Signed-off-by: Olivier Moysan <olivier.moysan@st.com>
> ---
> Changes in v2:
> - use pattern for compatible of child nodes
> - rework dmas and clocks properties
> - add "additionalProperties"
> ---
>  .../bindings/sound/st,stm32-sai.txt           | 107 ----------
>  .../bindings/sound/st,stm32-sai.yaml          | 191 ++++++++++++++++++
>  2 files changed, 191 insertions(+), 107 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.txt
>  create mode 100644 Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> 
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
> deleted file mode 100644
> index 944743dd9212..000000000000
> --- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
> +++ /dev/null
> @@ -1,107 +0,0 @@
> -STMicroelectronics STM32 Serial Audio Interface (SAI).
> -
> -The SAI interface (Serial Audio Interface) offers a wide set of audio protocols
> -as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
> -The SAI contains two independent audio sub-blocks. Each sub-block has
> -its own clock generator and I/O lines controller.
> -
> -Required properties:
> -  - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai"
> -  - reg: Base address and size of SAI common register set.
> -  - clocks: Must contain phandle and clock specifier pairs for each entry
> -	in clock-names.
> -  - clock-names: Must contain "pclk" "x8k" and "x11k"
> -	"pclk": Clock which feeds the peripheral bus interface.
> -	        Mandatory for "st,stm32h7-sai" compatible.
> -	        Not used for "st,stm32f4-sai" compatible.
> -	"x8k": SAI parent clock for sampling rates multiple of 8kHz.
> -	"x11k": SAI parent clock for sampling rates multiple of 11.025kHz.
> -  - interrupts: cpu DAI interrupt line shared by SAI sub-blocks
> -
> -Optional properties:
> -  - resets: Reference to a reset controller asserting the SAI
> -
> -SAI subnodes:
> -Two subnodes corresponding to SAI sub-block instances A et B can be defined.
> -Subnode can be omitted for unsused sub-block.
> -
> -SAI subnodes required properties:
> -  - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b"
> -	for SAI sub-block A or B respectively.
> -  - reg: Base address and size of SAI sub-block register set.
> -  - clocks: Must contain one phandle and clock specifier pair
> -	for sai_ck which feeds the internal clock generator.
> -	If the SAI shares a master clock, with another SAI set as MCLK
> -	clock provider, SAI provider phandle must be specified here.
> -  - clock-names: Must contain "sai_ck".
> -	Must also contain "MCLK", if SAI shares a master clock,
> -	with a SAI set as MCLK clock provider.
> -  - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
> -  - dma-names: identifier string for each DMA request line
> -	"tx": if sai sub-block is configured as playback DAI
> -	"rx": if sai sub-block is configured as capture DAI
> -  - pinctrl-names: should contain only value "default"
> -  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
> -
> -SAI subnodes Optional properties:
> -  - st,sync: specify synchronization mode.
> -	By default SAI sub-block is in asynchronous mode.
> -	This property sets SAI sub-block as slave of another SAI sub-block.
> -	Must contain the phandle and index of the sai sub-block providing
> -	the synchronization.
> -  - st,iec60958: support S/PDIF IEC6958 protocol for playback
> -	IEC60958 protocol is not available for capture.
> -	By default, custom protocol is assumed, meaning that protocol is
> -	configured according to protocol defined in related DAI link node,
> -	such as i2s, left justified, right justified, dsp and pdm protocols.
> -	Note: ac97 protocol is not supported by SAI driver
> -   - #clock-cells: should be 0. This property must be present if the SAI device
> -	is a master clock provider, according to clocks bindings, described in
> -	Documentation/devicetree/bindings/clock/clock-bindings.txt.
> -
> -The device node should contain one 'port' child node with one child 'endpoint'
> -node, according to the bindings defined in Documentation/devicetree/bindings/
> -graph.txt.
> -
> -Example:
> -sound_card {
> -	compatible = "audio-graph-card";
> -	dais = <&sai1b_port>;
> -};
> -
> -sai1: sai1@40015800 {
> -	compatible = "st,stm32h7-sai";
> -	#address-cells = <1>;
> -	#size-cells = <1>;
> -	ranges = <0 0x40015800 0x400>;
> -	reg = <0x40015800 0x4>;
> -	clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
> -	clock-names = "pclk", "x8k", "x11k";
> -	interrupts = <87>;
> -
> -	sai1a: audio-controller@40015804 {
> -		compatible = "st,stm32-sai-sub-a";
> -		reg = <0x4 0x1C>;
> -		clocks = <&rcc SAI1_CK>;
> -		clock-names = "sai_ck";
> -		dmas = <&dmamux1 1 87 0x400 0x0>;
> -		dma-names = "tx";
> -		pinctrl-names = "default";
> -		pinctrl-0 = <&pinctrl_sai1a>;
> -
> -		sai1b_port: port {
> -			cpu_endpoint: endpoint {
> -				remote-endpoint = <&codec_endpoint>;
> -				format = "i2s";
> -			};
> -		};
> -	};
> -};
> -
> -audio-codec {
> -	codec_port: port {
> -		codec_endpoint: endpoint {
> -			remote-endpoint = <&cpu_endpoint>;
> -		};
> -	};
> -};
> diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> new file mode 100644
> index 000000000000..51dd2b3bdeb1
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
> @@ -0,0 +1,191 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: STMicroelectronics STM32 Serial Audio Interface (SAI)
> +
> +maintainers:
> +  - Olivier Moysan <olivier.moysan@st.com>
> +
> +description:
> +  The SAI interface (Serial Audio Interface) offers a wide set of audio
> +  protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
> +  The SAI contains two independent audio sub-blocks. Each sub-block has
> +  its own clock generator and I/O lines controller.
> +
> +properties:
> +  compatible:
> +    enum:
> +      - st,stm32f4-sai
> +      - st,stm32h7-sai
> +
> +  reg:
> +    items:
> +      - description: Base address and size of SAI common register set.
> +      - description: Base address and size of SAI identification register set.
> +    minItems: 1
> +    maxItems: 2
> +
> +  ranges:
> +    maxItems: 1
> +
> +  interrupts:
> +    maxItems: 1
> +
> +  resets:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    const: 1
> +
> +  "#size-cells":
> +    const: 1
> +
> +  clocks:
> +    items:
> +      - description: pclk feeds the peripheral bus interface.
> +      - description: x8k, SAI parent clock for sampling rates multiple of 8kHz.
> +      - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz.
> +
> +  clock-names:
> +    items:
> +      - const: pclk
> +      - const: x8k
> +      - const: x11k
> +
> +required:
> +  - compatible
> +  - reg
> +  - ranges
> +  - "#address-cells"
> +  - "#size-cells"
> +  - clocks
> +  - clock-names
> +
> +patternProperties:
> +  "^audio-controller@[0-9a-f]+$":
> +    type: object
> +    description:
> +      Two subnodes corresponding to SAI sub-block instances A et B
> +      can be defined. Subnode can be omitted for unsused sub-block.
> +
> +    properties:
> +      compatible:
> +        description: Compatible for SAI sub-block A or B.
> +        pattern: "st,stm32-sai-sub-[ab]"
> +
> +      "#sound-dai-cells":
> +        const: 0
> +
> +      reg:
> +        maxItems: 1
> +
> +      clocks:
> +        items:
> +          - description: sai_ck clock feeding the internal clock generator.
> +          - description: MCLK clock from a SAI set as master clock provider.
> +        minItems: 1
> +        maxItems: 2
> +
> +      clock-names:
> +        items:
> +          - const: sai_ck
> +          - const: MCLK
> +        minItems: 1
> +        maxItems: 2
> +
> +      dmas:
> +        maxItems: 1
> +
> +      dma-names:
> +        description: |
> +          rx: SAI sub-block is configured as a capture DAI.
> +          tx: SAI sub-block is configured as a playback DAI.
> +        enum: [ rx, tx ]
> +
> +      st,sync:
> +        description:
> +          Configure the SAI sub-block as slave of another SAI sub-block.
> +          By default SAI sub-block is in asynchronous mode.
> +          Must contain the phandle and index of the SAI sub-block providing
> +          the synchronization.
> +        allOf:
> +          - $ref: /schemas/types.yaml#definitions/phandle-array
> +          - maxItems: 1
> +
> +      st,iec60958:
> +        description:
> +          If set, support S/PDIF IEC6958 protocol for playback.
> +          IEC60958 protocol is not available for capture.
> +          By default, custom protocol is assumed, meaning that protocol is
> +          configured according to protocol defined in related DAI link node,
> +          such as i2s, left justified, right justified, dsp and pdm protocols.
> +        allOf:
> +          - $ref: /schemas/types.yaml#definitions/flag
> +
> +      "#clock-cells":
> +        description: Configure the SAI device as master clock provider.
> +        const: 0
> +
> +    required:
> +      - compatible
> +      - "#sound-dai-cells"
> +      - reg
> +      - clocks
> +      - clock-names
> +      - dmas
> +      - dma-names
> +
> +    additionalProperties: false
> +
> +allOf:
> +  - if:
> +      properties:
> +        compatible:
> +          contains:
> +            const: st,stm32f4-sai
> +
> +  - then:

The '-' makes this 2 different schema.

> +      properties:
> +        clocks:
> +          items:
> +            - description: x8k, SAI parent clock for sampling rates multiple of 8kHz.
> +            - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz.        
> +
> +        clock-names:
> +          items:
> +            - const: x8k
> +            - const: x11k

It is impossible for the first definition and this one to both be true. 
You'll have to put the first definition in an 'else' clause here. 

> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +    #include <dt-bindings/clock/stm32mp1-clks.h>
> +    #include <dt-bindings/reset/stm32mp1-resets.h>
> +    sai1: sai@4400a000 {
> +      compatible = "st,stm32h7-sai";
> +      #address-cells = <1>;
> +      #size-cells = <1>;
> +      ranges = <0 0x4400a000 0x400>;
> +      reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
> +      interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
> +      clocks = <&rcc SAI1>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
> +      clock-names = "pclk", "x8k", "x11k";
> +      resets = <&rcc SAI1_R>;
> +
> +      sai1a: audio-controller@4400a004 {
> +        compatible = "st,stm32-sai-sub-a";
> +        #sound-dai-cells = <0>;
> +        reg = <0x4 0x1c>;
> +        clocks = <&rcc SAI1_K>;
> +        clock-names = "sai_ck";
> +        dmas = <&dmamux1 87 0x400 0x01>;
> +        dma-names = "tx";
> +      };
> +    };
> +
> +...
> -- 
> 2.17.1
>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt b/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
deleted file mode 100644
index 944743dd9212..000000000000
--- a/Documentation/devicetree/bindings/sound/st,stm32-sai.txt
+++ /dev/null
@@ -1,107 +0,0 @@ 
-STMicroelectronics STM32 Serial Audio Interface (SAI).
-
-The SAI interface (Serial Audio Interface) offers a wide set of audio protocols
-as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
-The SAI contains two independent audio sub-blocks. Each sub-block has
-its own clock generator and I/O lines controller.
-
-Required properties:
-  - compatible: Should be "st,stm32f4-sai" or "st,stm32h7-sai"
-  - reg: Base address and size of SAI common register set.
-  - clocks: Must contain phandle and clock specifier pairs for each entry
-	in clock-names.
-  - clock-names: Must contain "pclk" "x8k" and "x11k"
-	"pclk": Clock which feeds the peripheral bus interface.
-	        Mandatory for "st,stm32h7-sai" compatible.
-	        Not used for "st,stm32f4-sai" compatible.
-	"x8k": SAI parent clock for sampling rates multiple of 8kHz.
-	"x11k": SAI parent clock for sampling rates multiple of 11.025kHz.
-  - interrupts: cpu DAI interrupt line shared by SAI sub-blocks
-
-Optional properties:
-  - resets: Reference to a reset controller asserting the SAI
-
-SAI subnodes:
-Two subnodes corresponding to SAI sub-block instances A et B can be defined.
-Subnode can be omitted for unsused sub-block.
-
-SAI subnodes required properties:
-  - compatible: Should be "st,stm32-sai-sub-a" or "st,stm32-sai-sub-b"
-	for SAI sub-block A or B respectively.
-  - reg: Base address and size of SAI sub-block register set.
-  - clocks: Must contain one phandle and clock specifier pair
-	for sai_ck which feeds the internal clock generator.
-	If the SAI shares a master clock, with another SAI set as MCLK
-	clock provider, SAI provider phandle must be specified here.
-  - clock-names: Must contain "sai_ck".
-	Must also contain "MCLK", if SAI shares a master clock,
-	with a SAI set as MCLK clock provider.
-  - dmas: see Documentation/devicetree/bindings/dma/stm32-dma.txt
-  - dma-names: identifier string for each DMA request line
-	"tx": if sai sub-block is configured as playback DAI
-	"rx": if sai sub-block is configured as capture DAI
-  - pinctrl-names: should contain only value "default"
-  - pinctrl-0: see Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.yaml
-
-SAI subnodes Optional properties:
-  - st,sync: specify synchronization mode.
-	By default SAI sub-block is in asynchronous mode.
-	This property sets SAI sub-block as slave of another SAI sub-block.
-	Must contain the phandle and index of the sai sub-block providing
-	the synchronization.
-  - st,iec60958: support S/PDIF IEC6958 protocol for playback
-	IEC60958 protocol is not available for capture.
-	By default, custom protocol is assumed, meaning that protocol is
-	configured according to protocol defined in related DAI link node,
-	such as i2s, left justified, right justified, dsp and pdm protocols.
-	Note: ac97 protocol is not supported by SAI driver
-   - #clock-cells: should be 0. This property must be present if the SAI device
-	is a master clock provider, according to clocks bindings, described in
-	Documentation/devicetree/bindings/clock/clock-bindings.txt.
-
-The device node should contain one 'port' child node with one child 'endpoint'
-node, according to the bindings defined in Documentation/devicetree/bindings/
-graph.txt.
-
-Example:
-sound_card {
-	compatible = "audio-graph-card";
-	dais = <&sai1b_port>;
-};
-
-sai1: sai1@40015800 {
-	compatible = "st,stm32h7-sai";
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 0x40015800 0x400>;
-	reg = <0x40015800 0x4>;
-	clocks = <&rcc SAI1_CK>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
-	clock-names = "pclk", "x8k", "x11k";
-	interrupts = <87>;
-
-	sai1a: audio-controller@40015804 {
-		compatible = "st,stm32-sai-sub-a";
-		reg = <0x4 0x1C>;
-		clocks = <&rcc SAI1_CK>;
-		clock-names = "sai_ck";
-		dmas = <&dmamux1 1 87 0x400 0x0>;
-		dma-names = "tx";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_sai1a>;
-
-		sai1b_port: port {
-			cpu_endpoint: endpoint {
-				remote-endpoint = <&codec_endpoint>;
-				format = "i2s";
-			};
-		};
-	};
-};
-
-audio-codec {
-	codec_port: port {
-		codec_endpoint: endpoint {
-			remote-endpoint = <&cpu_endpoint>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
new file mode 100644
index 000000000000..51dd2b3bdeb1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/st,stm32-sai.yaml
@@ -0,0 +1,191 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/st,stm32-sai.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: STMicroelectronics STM32 Serial Audio Interface (SAI)
+
+maintainers:
+  - Olivier Moysan <olivier.moysan@st.com>
+
+description:
+  The SAI interface (Serial Audio Interface) offers a wide set of audio
+  protocols as I2S standards, LSB or MSB-justified, PCM/DSP, TDM, and AC'97.
+  The SAI contains two independent audio sub-blocks. Each sub-block has
+  its own clock generator and I/O lines controller.
+
+properties:
+  compatible:
+    enum:
+      - st,stm32f4-sai
+      - st,stm32h7-sai
+
+  reg:
+    items:
+      - description: Base address and size of SAI common register set.
+      - description: Base address and size of SAI identification register set.
+    minItems: 1
+    maxItems: 2
+
+  ranges:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  resets:
+    maxItems: 1
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  clocks:
+    items:
+      - description: pclk feeds the peripheral bus interface.
+      - description: x8k, SAI parent clock for sampling rates multiple of 8kHz.
+      - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz.
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: x8k
+      - const: x11k
+
+required:
+  - compatible
+  - reg
+  - ranges
+  - "#address-cells"
+  - "#size-cells"
+  - clocks
+  - clock-names
+
+patternProperties:
+  "^audio-controller@[0-9a-f]+$":
+    type: object
+    description:
+      Two subnodes corresponding to SAI sub-block instances A et B
+      can be defined. Subnode can be omitted for unsused sub-block.
+
+    properties:
+      compatible:
+        description: Compatible for SAI sub-block A or B.
+        pattern: "st,stm32-sai-sub-[ab]"
+
+      "#sound-dai-cells":
+        const: 0
+
+      reg:
+        maxItems: 1
+
+      clocks:
+        items:
+          - description: sai_ck clock feeding the internal clock generator.
+          - description: MCLK clock from a SAI set as master clock provider.
+        minItems: 1
+        maxItems: 2
+
+      clock-names:
+        items:
+          - const: sai_ck
+          - const: MCLK
+        minItems: 1
+        maxItems: 2
+
+      dmas:
+        maxItems: 1
+
+      dma-names:
+        description: |
+          rx: SAI sub-block is configured as a capture DAI.
+          tx: SAI sub-block is configured as a playback DAI.
+        enum: [ rx, tx ]
+
+      st,sync:
+        description:
+          Configure the SAI sub-block as slave of another SAI sub-block.
+          By default SAI sub-block is in asynchronous mode.
+          Must contain the phandle and index of the SAI sub-block providing
+          the synchronization.
+        allOf:
+          - $ref: /schemas/types.yaml#definitions/phandle-array
+          - maxItems: 1
+
+      st,iec60958:
+        description:
+          If set, support S/PDIF IEC6958 protocol for playback.
+          IEC60958 protocol is not available for capture.
+          By default, custom protocol is assumed, meaning that protocol is
+          configured according to protocol defined in related DAI link node,
+          such as i2s, left justified, right justified, dsp and pdm protocols.
+        allOf:
+          - $ref: /schemas/types.yaml#definitions/flag
+
+      "#clock-cells":
+        description: Configure the SAI device as master clock provider.
+        const: 0
+
+    required:
+      - compatible
+      - "#sound-dai-cells"
+      - reg
+      - clocks
+      - clock-names
+      - dmas
+      - dma-names
+
+    additionalProperties: false
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: st,stm32f4-sai
+
+  - then:
+      properties:
+        clocks:
+          items:
+            - description: x8k, SAI parent clock for sampling rates multiple of 8kHz.
+            - description: x11k, SAI parent clock for sampling rates multiple of 11.025kHz.        
+
+        clock-names:
+          items:
+            - const: x8k
+            - const: x11k
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/stm32mp1-clks.h>
+    #include <dt-bindings/reset/stm32mp1-resets.h>
+    sai1: sai@4400a000 {
+      compatible = "st,stm32h7-sai";
+      #address-cells = <1>;
+      #size-cells = <1>;
+      ranges = <0 0x4400a000 0x400>;
+      reg = <0x4400a000 0x4>, <0x4400a3f0 0x10>;
+      interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
+      clocks = <&rcc SAI1>, <&rcc PLL1_Q>, <&rcc PLL2_P>;
+      clock-names = "pclk", "x8k", "x11k";
+      resets = <&rcc SAI1_R>;
+
+      sai1a: audio-controller@4400a004 {
+        compatible = "st,stm32-sai-sub-a";
+        #sound-dai-cells = <0>;
+        reg = <0x4 0x1c>;
+        clocks = <&rcc SAI1_K>;
+        clock-names = "sai_ck";
+        dmas = <&dmamux1 87 0x400 0x01>;
+        dma-names = "tx";
+      };
+    };
+
+...