diff mbox series

[V3,7/7] ARM: dts: imx6sx-udoo-neo: Use new pin names with DCE/DTE for UART pins

Message ID 1581931886-12173-7-git-send-email-Anson.Huang@nxp.com (mailing list archive)
State Mainlined
Commit 1becc1a317062b840966093615d0e564fa4932a3
Headers show
Series [V3,1/7] ARM: dts: imx6sx: Improve UART pins macro defines | expand

Commit Message

Anson Huang Feb. 17, 2020, 9:31 a.m. UTC
Use new pin names containing DCE/DTE for UART RX/TX/RTS/CTS pins, this
is to distinguish the DCE/DTE functions.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
Reviewed-by: Uwe Kleine-K枚nig <u.kleine-koenig@pengutronix.de>
---
No change.
---
 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
index 25d4aa9..ee64565 100644
--- a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
@@ -235,28 +235,28 @@ 
 
 	pinctrl_uart1: uart1grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1>,
-			<MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1>;
+			<MX6SX_PAD_GPIO1_IO04__UART1_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO05__UART1_DCE_RX	0x1b0b1>;
 	};
 
 	pinctrl_uart2: uart2grp {
 		fsl,pins =
-			<MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1>,
-			<MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1>;
+			<MX6SX_PAD_GPIO1_IO06__UART2_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_GPIO1_IO07__UART2_DCE_RX	0x1b0b1>;
 	};
 
 	pinctrl_uart3: uart3grp {
 		fsl,pins =
-			<MX6SX_PAD_SD3_DATA4__UART3_RX          0x13059>,
-			<MX6SX_PAD_SD3_DATA5__UART3_TX          0x13059>,
-			<MX6SX_PAD_SD3_DATA6__UART3_RTS_B       0x13059>,
-			<MX6SX_PAD_SD3_DATA7__UART3_CTS_B       0x13059>;
+			<MX6SX_PAD_SD3_DATA4__UART3_DCE_RX	0x13059>,
+			<MX6SX_PAD_SD3_DATA5__UART3_DCE_TX	0x13059>,
+			<MX6SX_PAD_SD3_DATA6__UART3_DCE_RTS	0x13059>,
+			<MX6SX_PAD_SD3_DATA7__UART3_DCE_CTS	0x13059>;
 	};
 
 	pinctrl_uart5: uart5grp {
 		fsl,pins =
-			<MX6SX_PAD_SD4_DATA4__UART5_RX		0x1b0b1>,
-			<MX6SX_PAD_SD4_DATA5__UART5_TX		0x1b0b1>;
+			<MX6SX_PAD_SD4_DATA4__UART5_DCE_RX	0x1b0b1>,
+			<MX6SX_PAD_SD4_DATA5__UART5_DCE_TX	0x1b0b1>;
 	};
 
 	pinctrl_uart6: uart6grp {
@@ -265,10 +265,10 @@ 
 			<MX6SX_PAD_CSI_DATA01__UART6_DSR_B	0x1b0b1>,
 			<MX6SX_PAD_CSI_DATA02__UART6_DTR_B	0x1b0b1>,
 			<MX6SX_PAD_CSI_DATA03__UART6_DCD_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA04__UART6_RX		0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA05__UART6_TX		0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA06__UART6_RTS_B	0x1b0b1>,
-			<MX6SX_PAD_CSI_DATA07__UART6_CTS_B	0x1b0b1>;
+			<MX6SX_PAD_CSI_DATA04__UART6_DCE_RX	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA05__UART6_DCE_TX	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA06__UART6_DCE_RTS	0x1b0b1>,
+			<MX6SX_PAD_CSI_DATA07__UART6_DCE_CTS	0x1b0b1>;
 	};
 
 	pinctrl_otg1_reg: otg1grp {