@@ -74,10 +74,13 @@ phylib to the sfp/phylink support. Please send patches to improve
this documentation.
1. Optionally split the network driver's phylib update function into
- three parts dealing with link-down, link-up and reconfiguring the
- MAC settings. This can be done as a separate preparation commit.
+ two parts dealing with link-down and link-up. This can be done as
+ a separate preparation commit.
- An example of this preparation can be found in git commit fc548b991fb0.
+ An older example of this preparation can be found in git commit
+ fc548b991fb0, although this was splitting into three parts; the
+ link-up part now includes configuring the MAC for the link settings.
+ Please see :c:func:`mac_link_up` for more information on this.
2. Replace::
@@ -207,6 +210,14 @@ this documentation.
using. This is particularly important for in-band negotiation
methods such as 1000base-X and SGMII.
+ The :c:func:`mac_link_up` method is used to inform the MAC that the
+ link has come up. The call includes the negotiation mode and interface
+ for reference only. The finalised link parameters are also supplied
+ (speed, duplex and flow control/pause enablement settings) which
+ should be used to configure the MAC when the MAC and PCS are not
+ tightly integrated, or when the settings are not coming from in-band
+ negotiation.
+
The :c:func:`mac_config` method is used to update the MAC with the
requested state, and must avoid unnecessarily taking the link down
when making changes to the MAC configuration. This means the
@@ -619,8 +619,11 @@ static void macb_mac_link_down(struct phylink_config *config, unsigned int mode,
netif_tx_stop_all_queues(ndev);
}
-static void macb_mac_link_up(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface, struct phy_device *phy)
+static void macb_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
struct net_device *ndev = to_net_dev(config->dev);
struct macb *bp = netdev_priv(ndev);
@@ -154,8 +154,11 @@ static void dpaa2_mac_config(struct phylink_config *config, unsigned int mode,
netdev_err(mac->net_dev, "dpmac_set_link_state() = %d\n", err);
}
-static void dpaa2_mac_link_up(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface, struct phy_device *phy)
+static void dpaa2_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
struct dpaa2_mac *mac = phylink_to_dpaa2_mac(config);
struct dpmac_link_state *dpmac_state = &mac->state;
@@ -3952,9 +3952,11 @@ static void mvneta_mac_link_down(struct phylink_config *config,
mvneta_set_eee(pp, false);
}
-static void mvneta_mac_link_up(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface,
- struct phy_device *phy)
+static void mvneta_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
struct net_device *ndev = to_net_dev(config->dev);
struct mvneta_port *pp = netdev_priv(ndev);
@@ -58,8 +58,11 @@ static struct {
*/
static void mvpp2_mac_config(struct phylink_config *config, unsigned int mode,
const struct phylink_link_state *state);
-static void mvpp2_mac_link_up(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface, struct phy_device *phy);
+static void mvpp2_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause);
/* Queue modes */
#define MVPP2_QDIST_SINGLE_MODE 0
@@ -3473,8 +3476,9 @@ static void mvpp2_start_dev(struct mvpp2_port *port)
.interface = port->phy_interface,
};
mvpp2_mac_config(&port->phylink_config, MLO_AN_INBAND, &state);
- mvpp2_mac_link_up(&port->phylink_config, MLO_AN_INBAND,
- port->phy_interface, NULL);
+ mvpp2_mac_link_up(&port->phylink_config, NULL,
+ MLO_AN_INBAND, port->phy_interface,
+ SPEED_UNKNOWN, DUPLEX_UNKNOWN, false, false);
}
netif_tx_start_all_queues(port->dev);
@@ -5141,8 +5145,11 @@ static void mvpp2_mac_config(struct phylink_config *config, unsigned int mode,
mvpp2_port_enable(port);
}
-static void mvpp2_mac_link_up(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface, struct phy_device *phy)
+static void mvpp2_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
struct net_device *dev = to_net_dev(config->dev);
struct mvpp2_port *port = netdev_priv(dev);
@@ -412,9 +412,10 @@ static void mtk_mac_link_down(struct phylink_config *config, unsigned int mode,
mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id));
}
-static void mtk_mac_link_up(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface,
- struct phy_device *phy)
+static void mtk_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex, bool tx_pause, bool rx_pause)
{
struct mtk_mac *mac = container_of(config, struct mtk_mac,
phylink_config);
@@ -950,8 +950,10 @@ static void stmmac_mac_link_down(struct phylink_config *config,
}
static void stmmac_mac_link_up(struct phylink_config *config,
+ struct phy_device *phy,
unsigned int mode, phy_interface_t interface,
- struct phy_device *phy)
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
struct stmmac_priv *priv = netdev_priv(to_net_dev(config->dev));
@@ -1486,9 +1486,10 @@ static void axienet_mac_link_down(struct phylink_config *config,
}
static void axienet_mac_link_up(struct phylink_config *config,
- unsigned int mode,
- phy_interface_t interface,
- struct phy_device *phy)
+ struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
/* nothing meaningful to do */
}
@@ -480,8 +480,11 @@ static void phylink_mac_link_up(struct phylink *pl,
struct net_device *ndev = pl->netdev;
pl->cur_interface = link_state.interface;
- pl->ops->mac_link_up(pl->config, pl->cur_link_an_mode,
- pl->cur_interface, pl->phydev);
+ pl->ops->mac_link_up(pl->config, pl->phydev,
+ pl->cur_link_an_mode, pl->cur_interface,
+ link_state.speed, link_state.duplex,
+ !!(link_state.pause & MLO_PAUSE_TX),
+ !!(link_state.pause & MLO_PAUSE_RX));
if (ndev)
netif_carrier_on(ndev);
@@ -547,6 +550,8 @@ static void phylink_resolve(struct work_struct *w)
link_state.pause = pl->phy_state.pause;
phylink_apply_manual_flow(pl, &link_state);
phylink_mac_config(pl, &link_state);
+ } else {
+ phylink_apply_manual_flow(pl, &link_state);
}
break;
}
@@ -91,9 +91,10 @@ struct phylink_mac_ops {
void (*mac_an_restart)(struct phylink_config *config);
void (*mac_link_down)(struct phylink_config *config, unsigned int mode,
phy_interface_t interface);
- void (*mac_link_up)(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface,
- struct phy_device *phy);
+ void (*mac_link_up)(struct phylink_config *config,
+ struct phy_device *phy, unsigned int mode,
+ phy_interface_t interface, int speed, int duplex,
+ bool tx_pause, bool rx_pause);
};
#if 0 /* For kernel-doc purposes only. */
@@ -152,6 +153,9 @@ void mac_pcs_get_state(struct phylink_config *config,
* guaranteed to be correct, and so any mac_config() implementation must
* never reference these fields.
*
+ * (this requires a rewrite - please refer to mac_link_up() for situations
+ * where the PCS and MAC are not tightly integrated.)
+ *
* In all negotiation modes, as defined by @mode, @state->pause indicates the
* pause settings which should be applied as follows. If %MLO_PAUSE_AN is not
* set, %MLO_PAUSE_TX and %MLO_PAUSE_RX indicate whether the MAC should send
@@ -162,12 +166,20 @@ void mac_pcs_get_state(struct phylink_config *config,
* The action performed depends on the currently selected mode:
*
* %MLO_AN_FIXED, %MLO_AN_PHY:
- * Configure the specified @state->speed and @state->duplex over a link
- * specified by @state->interface. @state->advertising may be used, but
- * is not required. Pause modes as above. Other members of @state must
- * be ignored.
+ * Configure for non-inband negotiation mode, where the link settings
+ * are completely communicated via mac_link_up(). The physical link
+ * protocol from the MAC is specified by @state->interface.
+ *
+ * @state->advertising may be used, but is not required.
+ *
+ * Older drivers (prior to the mac_link_up() change) may use @state->speed,
+ * @state->duplex and @state->pause to configure the MAC, but this is
+ * deprecated; such drivers should be converted to use mac_link_up().
*
- * Valid state members: interface, speed, duplex, pause, advertising.
+ * Other members of @state must be ignored.
+ *
+ * Valid state members: interface, advertising.
+ * Deprecated state members: speed, duplex, pause.
*
* %MLO_AN_INBAND:
* place the link in an inband negotiation mode (such as 802.3z
@@ -228,19 +240,34 @@ void mac_link_down(struct phylink_config *config, unsigned int mode,
/**
* mac_link_up() - allow the link to come up
* @config: a pointer to a &struct phylink_config.
+ * @phy: any attached phy
* @mode: link autonegotiation mode
* @interface: link &typedef phy_interface_t mode
- * @phy: any attached phy
+ * @speed: link speed
+ * @duplex: link duplex
+ * @tx_pause: link transmit pause enablement status
+ * @rx_pause: link receive pause enablement status
*
- * If @mode is not an in-band negotiation mode (as defined by
- * phylink_autoneg_inband()), allow the link to come up. If @phy
- * is non-%NULL, configure Energy Efficient Ethernet by calling
+ * Configure the MAC for an established link.
+ *
+ * @speed, @duplex, @tx_pause and @rx_pause indicate the finalised link
+ * settings, and should be used to configure the MAC block appropriately
+ * where these settings are not automatically conveyed from the PCS block,
+ * or if in-band negotiation (as defined by phylink_autoneg_inband(@mode))
+ * is disabled.
+ *
+ * Note that when 802.3z in-band negotiation is in use, it is possible
+ * that the user wishes to override the pause settings, and this should
+ * be allowed when considering the implementation of this method.
+ *
+ * If in-band negotiation mode is disabled, allow the link to come up. If
+ * @phy is non-%NULL, configure Energy Efficient Ethernet by calling
* phy_init_eee() and perform appropriate MAC configuration for EEE.
* Interface type selection must be done in mac_config().
*/
-void mac_link_up(struct phylink_config *config, unsigned int mode,
- phy_interface_t interface,
- struct phy_device *phy);
+void mac_link_up(struct phylink_config *config, struct phy_device *phy,
+ unsigned int mode, phy_interface_t interface,
+ int speed, int duplex, bool tx_pause, bool rx_pause);
#endif
struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *,
@@ -489,9 +489,11 @@ static void dsa_port_phylink_mac_link_down(struct phylink_config *config,
}
static void dsa_port_phylink_mac_link_up(struct phylink_config *config,
+ struct phy_device *phydev,
unsigned int mode,
phy_interface_t interface,
- struct phy_device *phydev)
+ int speed, int duplex,
+ bool tx_pause, bool rx_pause)
{
struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
struct dsa_switch *ds = dp->ds;
Propagate the resolved link parameters via the mac_link_up() call for MACs that do not automatically track their PCS state. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> --- Documentation/networking/sfp-phylink.rst | 17 +++++- drivers/net/ethernet/cadence/macb_main.c | 7 ++- .../net/ethernet/freescale/dpaa2/dpaa2-mac.c | 7 ++- drivers/net/ethernet/marvell/mvneta.c | 8 ++- .../net/ethernet/marvell/mvpp2/mvpp2_main.c | 19 +++++-- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 ++- .../net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +- .../net/ethernet/xilinx/xilinx_axienet_main.c | 7 ++- drivers/net/phy/phylink.c | 9 ++- include/linux/phylink.h | 57 ++++++++++++++----- net/dsa/port.c | 4 +- 11 files changed, 105 insertions(+), 41 deletions(-)