diff mbox series

[RFC,04/11] cpufreq: Remove Calxeda driver

Message ID 20200218171321.30990-5-robh@kernel.org (mailing list archive)
State New, archived
Headers show
Series Removing Calxeda platform support | expand

Commit Message

Rob Herring Feb. 18, 2020, 5:13 p.m. UTC
Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: linux-pm@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
---
Do not apply yet.

 drivers/cpufreq/Kconfig.arm          |  10 ---
 drivers/cpufreq/Makefile             |   3 +-
 drivers/cpufreq/cpufreq-dt-platdev.c |   3 -
 drivers/cpufreq/highbank-cpufreq.c   | 106 ---------------------------
 4 files changed, 1 insertion(+), 121 deletions(-)
 delete mode 100644 drivers/cpufreq/highbank-cpufreq.c

--
2.20.1

Comments

Viresh Kumar Feb. 19, 2020, 1:49 a.m. UTC | #1
On 18-02-20, 11:13, Rob Herring wrote:
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: linux-pm@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---
> Do not apply yet.
> 
>  drivers/cpufreq/Kconfig.arm          |  10 ---
>  drivers/cpufreq/Makefile             |   3 +-
>  drivers/cpufreq/cpufreq-dt-platdev.c |   3 -
>  drivers/cpufreq/highbank-cpufreq.c   | 106 ---------------------------
>  4 files changed, 1 insertion(+), 121 deletions(-)
>  delete mode 100644 drivers/cpufreq/highbank-cpufreq.c

Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Mark Langsdorf Feb. 20, 2020, 5:06 p.m. UTC | #2
On 2/18/20 11:13 AM, Rob Herring wrote:
> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net>
> Cc: Viresh Kumar <viresh.kumar@linaro.org>
> Cc: linux-pm@vger.kernel.org
> Signed-off-by: Rob Herring <robh@kernel.org>
> ---

Acked-by: Mark Langsdorf <mark.langsdorf@gmail.com>
diff mbox series

Patch

diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm
index 3858d86cf409..27fdd5ac21da 100644
--- a/drivers/cpufreq/Kconfig.arm
+++ b/drivers/cpufreq/Kconfig.arm
@@ -79,16 +79,6 @@  config ARM_BRCMSTB_AVS_CPUFREQ

 	  Say Y, if you have a Broadcom SoC with AVS support for DFS or DVFS.

-config ARM_HIGHBANK_CPUFREQ
-	tristate "Calxeda Highbank-based"
-	depends on ARCH_HIGHBANK && CPUFREQ_DT && REGULATOR
-	default m
-	help
-	  This adds the CPUFreq driver for Calxeda Highbank SoC
-	  based boards.
-
-	  If in doubt, say N.
-
 config ARM_IMX6Q_CPUFREQ
 	tristate "Freescale i.MX6 cpufreq support"
 	depends on ARCH_MXC
diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile
index f6670c4abbb0..47d773b9312a 100644
--- a/drivers/cpufreq/Makefile
+++ b/drivers/cpufreq/Makefile
@@ -5,7 +5,7 @@  obj-$(CONFIG_CPU_FREQ)			+= cpufreq.o freq_table.o
 # CPUfreq stats
 obj-$(CONFIG_CPU_FREQ_STAT)             += cpufreq_stats.o

-# CPUfreq governors
+# CPUfreq governors
 obj-$(CONFIG_CPU_FREQ_GOV_PERFORMANCE)	+= cpufreq_performance.o
 obj-$(CONFIG_CPU_FREQ_GOV_POWERSAVE)	+= cpufreq_powersave.o
 obj-$(CONFIG_CPU_FREQ_GOV_USERSPACE)	+= cpufreq_userspace.o
@@ -52,7 +52,6 @@  obj-$(CONFIG_ARM_ARMADA_8K_CPUFREQ)	+= armada-8k-cpufreq.o
 obj-$(CONFIG_ARM_BRCMSTB_AVS_CPUFREQ)	+= brcmstb-avs-cpufreq.o
 obj-$(CONFIG_ACPI_CPPC_CPUFREQ)		+= cppc_cpufreq.o
 obj-$(CONFIG_ARCH_DAVINCI)		+= davinci-cpufreq.o
-obj-$(CONFIG_ARM_HIGHBANK_CPUFREQ)	+= highbank-cpufreq.o
 obj-$(CONFIG_ARM_IMX6Q_CPUFREQ)		+= imx6q-cpufreq.o
 obj-$(CONFIG_ARM_IMX_CPUFREQ_DT)	+= imx-cpufreq-dt.o
 obj-$(CONFIG_ARM_KIRKWOOD_CPUFREQ)	+= kirkwood-cpufreq.o
diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c
index f2ae9cd455c1..274294f83e7c 100644
--- a/drivers/cpufreq/cpufreq-dt-platdev.c
+++ b/drivers/cpufreq/cpufreq-dt-platdev.c
@@ -102,9 +102,6 @@  static const struct of_device_id whitelist[] __initconst = {
 static const struct of_device_id blacklist[] __initconst = {
 	{ .compatible = "allwinner,sun50i-h6", },

-	{ .compatible = "calxeda,highbank", },
-	{ .compatible = "calxeda,ecx-2000", },
-
 	{ .compatible = "fsl,imx7d", },
 	{ .compatible = "fsl,imx8mq", },
 	{ .compatible = "fsl,imx8mm", },
diff --git a/drivers/cpufreq/highbank-cpufreq.c b/drivers/cpufreq/highbank-cpufreq.c
deleted file mode 100644
index 5a7f6dafcddb..000000000000
--- a/drivers/cpufreq/highbank-cpufreq.c
+++ /dev/null
@@ -1,106 +0,0 @@ 
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * Copyright (C) 2012 Calxeda, Inc.
- *
- * This driver provides the clk notifier callbacks that are used when
- * the cpufreq-dt driver changes to frequency to alert the highbank
- * EnergyCore Management Engine (ECME) about the need to change
- * voltage. The ECME interfaces with the actual voltage regulators.
- */
-
-#define pr_fmt(fmt)	KBUILD_MODNAME ": " fmt
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/clk.h>
-#include <linux/cpu.h>
-#include <linux/err.h>
-#include <linux/of.h>
-#include <linux/pl320-ipc.h>
-#include <linux/platform_device.h>
-
-#define HB_CPUFREQ_CHANGE_NOTE	0x80000001
-#define HB_CPUFREQ_IPC_LEN	7
-#define HB_CPUFREQ_VOLT_RETRIES	15
-
-static int hb_voltage_change(unsigned int freq)
-{
-	u32 msg[HB_CPUFREQ_IPC_LEN] = {HB_CPUFREQ_CHANGE_NOTE, freq / 1000000};
-
-	return pl320_ipc_transmit(msg);
-}
-
-static int hb_cpufreq_clk_notify(struct notifier_block *nb,
-				unsigned long action, void *hclk)
-{
-	struct clk_notifier_data *clk_data = hclk;
-	int i = 0;
-
-	if (action == PRE_RATE_CHANGE) {
-		if (clk_data->new_rate > clk_data->old_rate)
-			while (hb_voltage_change(clk_data->new_rate))
-				if (i++ > HB_CPUFREQ_VOLT_RETRIES)
-					return NOTIFY_BAD;
-	} else if (action == POST_RATE_CHANGE) {
-		if (clk_data->new_rate < clk_data->old_rate)
-			while (hb_voltage_change(clk_data->new_rate))
-				if (i++ > HB_CPUFREQ_VOLT_RETRIES)
-					return NOTIFY_BAD;
-	}
-
-	return NOTIFY_DONE;
-}
-
-static struct notifier_block hb_cpufreq_clk_nb = {
-	.notifier_call = hb_cpufreq_clk_notify,
-};
-
-static int hb_cpufreq_driver_init(void)
-{
-	struct platform_device_info devinfo = { .name = "cpufreq-dt", };
-	struct device *cpu_dev;
-	struct clk *cpu_clk;
-	struct device_node *np;
-	int ret;
-
-	if ((!of_machine_is_compatible("calxeda,highbank")) &&
-		(!of_machine_is_compatible("calxeda,ecx-2000")))
-		return -ENODEV;
-
-	cpu_dev = get_cpu_device(0);
-	if (!cpu_dev) {
-		pr_err("failed to get highbank cpufreq device\n");
-		return -ENODEV;
-	}
-
-	np = of_node_get(cpu_dev->of_node);
-	if (!np) {
-		pr_err("failed to find highbank cpufreq node\n");
-		return -ENOENT;
-	}
-
-	cpu_clk = clk_get(cpu_dev, NULL);
-	if (IS_ERR(cpu_clk)) {
-		ret = PTR_ERR(cpu_clk);
-		pr_err("failed to get cpu0 clock: %d\n", ret);
-		goto out_put_node;
-	}
-
-	ret = clk_notifier_register(cpu_clk, &hb_cpufreq_clk_nb);
-	if (ret) {
-		pr_err("failed to register clk notifier: %d\n", ret);
-		goto out_put_node;
-	}
-
-	/* Instantiate cpufreq-dt */
-	platform_device_register_full(&devinfo);
-
-out_put_node:
-	of_node_put(np);
-	return ret;
-}
-module_init(hb_cpufreq_driver_init);
-
-MODULE_AUTHOR("Mark Langsdorf <mark.langsdorf@calxeda.com>");
-MODULE_DESCRIPTION("Calxeda Highbank cpufreq driver");
-MODULE_LICENSE("GPL");