[v4,2/5] dt-bindings: hwmon: Document adt7475 bypass-attenuator property
diff mbox series

Message ID 20200221041631.10960-3-chris.packham@alliedtelesis.co.nz
State Superseded
Headers show
Series
  • hwmon: (adt7475) attenuator bypass and pwm invert
Related show

Commit Message

Chris Packham Feb. 21, 2020, 4:16 a.m. UTC
From: Logan Shaw <logan.shaw@alliedtelesis.co.nz>

Add documentation for the bypass-attenuator-in[0-4] property.

Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
---

Notes:
    Changes in v4:
    - use $ref uint32 and enum
    - add 'adi' vendor prefix
    
    Changes in v3:
    - separated addition of new properties from conversion to yaml

 .../devicetree/bindings/hwmon/adt7475.yaml          | 13 +++++++++++++
 1 file changed, 13 insertions(+)

Comments

Rob Herring Feb. 26, 2020, 4:48 p.m. UTC | #1
On Fri, 21 Feb 2020 17:16:28 +1300, Chris Packham wrote:
> 
> From: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
> 
> Add documentation for the bypass-attenuator-in[0-4] property.
> 
> Signed-off-by: Logan Shaw <logan.shaw@alliedtelesis.co.nz>
> Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
> ---
> 
> Notes:
>     Changes in v4:
>     - use $ref uint32 and enum
>     - add 'adi' vendor prefix
>     
>     Changes in v3:
>     - separated addition of new properties from conversion to yaml
> 
>  .../devicetree/bindings/hwmon/adt7475.yaml          | 13 +++++++++++++
>  1 file changed, 13 insertions(+)
> 

Reviewed-by: Rob Herring <robh@kernel.org>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/hwmon/adt7475.yaml b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
index 2252499ea201..e40612ee075f 100644
--- a/Documentation/devicetree/bindings/hwmon/adt7475.yaml
+++ b/Documentation/devicetree/bindings/hwmon/adt7475.yaml
@@ -39,6 +39,17 @@  properties:
   reg:
     maxItems: 1
 
+patternProperties:
+  "^adi,bypass-attenuator-in[0-4]$":
+    description: |
+      Configures bypassing the individual voltage input attenuator. If
+      set to 1 the attenuator is bypassed if set to 0 the attenuator is
+      not bypassed. If the property is absent then the attenuator
+      retains it's configuration from the bios/bootloader.
+    allOf:
+     - $ref: /schemas/types.yaml#/definitions/uint32
+     - enum: [0, 1]
+
 required:
   - compatible
   - reg
@@ -52,6 +63,8 @@  examples:
       hwmon@2e {
         compatible = "adi,adt7476";
         reg = <0x2e>;
+        adi,bypass-attenuator-in0 = <1>;
+        adi,bypass-attenuator-in1 = <0>;
       };
     };