[3/7] ti-sysc: Improve reset to work with modules with no sysconfig
diff mbox series

Message ID 20200221195256.54016-4-tony@atomide.com
State New
Headers show
Series
  • ti-sysc driver fix for hdq1w and few improvments
Related show

Commit Message

Tony Lindgren Feb. 21, 2020, 7:52 p.m. UTC
At least display susbsystem (DSS) has modules with no sysconfig registers
and rely on custom function for module reset handling. Let's make reset
work with that too.

Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/bus/ti-sysc.c | 10 ++++++----
 1 file changed, 6 insertions(+), 4 deletions(-)

Patch
diff mbox series

diff --git a/drivers/bus/ti-sysc.c b/drivers/bus/ti-sysc.c
--- a/drivers/bus/ti-sysc.c
+++ b/drivers/bus/ti-sysc.c
@@ -1571,7 +1571,7 @@  static int sysc_reset(struct sysc *ddata)
 	sysc_offset = ddata->offsets[SYSC_SYSCONFIG];
 	syss_offset = ddata->offsets[SYSC_SYSSTATUS];
 
-	if (ddata->legacy_mode || sysc_offset < 0 ||
+	if (ddata->legacy_mode ||
 	    ddata->cap->regbits->srst_shift < 0 ||
 	    ddata->cfg.quirks & SYSC_QUIRK_NO_RESET_ON_INIT)
 		return 0;
@@ -1586,9 +1586,11 @@  static int sysc_reset(struct sysc *ddata)
 	if (ddata->pre_reset_quirk)
 		ddata->pre_reset_quirk(ddata);
 
-	sysc_val = sysc_read_sysconfig(ddata);
-	sysc_val |= sysc_mask;
-	sysc_write(ddata, sysc_offset, sysc_val);
+	if (sysc_offset >= 0) {
+		sysc_val = sysc_read_sysconfig(ddata);
+		sysc_val |= sysc_mask;
+		sysc_write(ddata, sysc_offset, sysc_val);
+	}
 
 	if (ddata->cfg.srst_udelay)
 		usleep_range(ddata->cfg.srst_udelay,