[V16,5/5] arm64: dts: imx: add i.MX8QXP thermal support
diff mbox series

Message ID 1582330132-13461-5-git-send-email-Anson.Huang@nxp.com
State New
Delegated to: Daniel Lezcano
Headers show
Series
  • [V16,1/5] dt-bindings: fsl: scu: add thermal binding
Related show

Commit Message

Anson Huang Feb. 22, 2020, 12:08 a.m. UTC
Add i.MX8QXP CPU thermal zone support.

Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
---
No change.
---
 arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 36 ++++++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)

Comments

Shawn Guo March 10, 2020, 7:04 a.m. UTC | #1
On Sat, Feb 22, 2020 at 08:08:52AM +0800, Anson Huang wrote:
> Add i.MX8QXP CPU thermal zone support.
> 
> Signed-off-by: Anson Huang <Anson.Huang@nxp.com>
> ---
> No change.
> ---
>  arch/arm64/boot/dts/freescale/imx8qxp.dtsi | 36 ++++++++++++++++++++++++++++++
>  1 file changed, 36 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> index fb5f752..0a14fe4 100644
> --- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
> @@ -11,6 +11,7 @@
>  #include <dt-bindings/input/input.h>
>  #include <dt-bindings/interrupt-controller/arm-gic.h>
>  #include <dt-bindings/pinctrl/pads-imx8qxp.h>
> +#include <dt-bindings/thermal/thermal.h>
>  
>  / {
>  	interrupt-parent = <&gic>;
> @@ -189,6 +190,11 @@
>  			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
>  			timeout-sec = <60>;
>  		};
> +
> +		tsens: thermal-sensor {
> +			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
> +			#thermal-sensor-cells = <1>;
> +		};
>  	};
>  
>  	timer {
> @@ -586,4 +592,34 @@
>  			#clock-cells = <1>;
>  		};
>  	};
> +
> +	thermal_zones: thermal-zones {
> +		cpu-thermal0 {
> +			polling-delay-passive = <250>;
> +			polling-delay = <2000>;
> +			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;

newline

> +			trips {
> +				cpu_alert0: trip0 {
> +					temperature = <107000>;
> +					hysteresis = <2000>;
> +					type = "passive";
> +				};

newline

> +				cpu_crit0: trip1 {
> +					temperature = <127000>;
> +					hysteresis = <2000>;
> +					type = "critical";
> +				};
> +			};

newline

I fixed them up and applied the patch.

Shawn

> +			cooling-maps {
> +				map0 {
> +					trip = <&cpu_alert0>;
> +					cooling-device =
> +						<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +						<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +						<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
> +						<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
> +				};
> +			};
> +		};
> +	};
>  };
> -- 
> 2.7.4
>

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
index fb5f752..0a14fe4 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp.dtsi
@@ -11,6 +11,7 @@ 
 #include <dt-bindings/input/input.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/pinctrl/pads-imx8qxp.h>
+#include <dt-bindings/thermal/thermal.h>
 
 / {
 	interrupt-parent = <&gic>;
@@ -189,6 +190,11 @@ 
 			compatible = "fsl,imx8qxp-sc-wdt", "fsl,imx-sc-wdt";
 			timeout-sec = <60>;
 		};
+
+		tsens: thermal-sensor {
+			compatible = "fsl,imx8qxp-sc-thermal", "fsl,imx-sc-thermal";
+			#thermal-sensor-cells = <1>;
+		};
 	};
 
 	timer {
@@ -586,4 +592,34 @@ 
 			#clock-cells = <1>;
 		};
 	};
+
+	thermal_zones: thermal-zones {
+		cpu-thermal0 {
+			polling-delay-passive = <250>;
+			polling-delay = <2000>;
+			thermal-sensors = <&tsens IMX_SC_R_SYSTEM>;
+			trips {
+				cpu_alert0: trip0 {
+					temperature = <107000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+				cpu_crit0: trip1 {
+					temperature = <127000>;
+					hysteresis = <2000>;
+					type = "critical";
+				};
+			};
+			cooling-maps {
+				map0 {
+					trip = <&cpu_alert0>;
+					cooling-device =
+						<&A35_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
+						<&A35_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
+				};
+			};
+		};
+	};
 };