[v2] media: spi: gs1662: Use new structure for SPI transfer delays

Commit Message

Sergiu Cuciurean Feb. 27, 2020, 1:24 p.m. UTC

In a recent change to the SPI subsystem [1], a new `delay` struct was added
to replace the `delay_usecs`. This change replaces the current
`delay_usecs` with `delay` for this driver.

The `spi_transfer_delay_exec()` function [in the SPI framework] makes sure
that both `delay_usecs` & `delay` are used (in this order to preserve
backwards compatibility).

[1] commit bebcfd272df6 ("spi: introduce `delay` field for
`spi_transfer` + spi_transfer_delay_exec()")

Signed-off-by: Sergiu Cuciurean <[e-mail]>
---

Changelog v1->v2:
*Change the remaining delays

 drivers/media/spi/gs1662.c | 20 ++++++++++++++++----
 1 file changed, 16 insertions(+), 4 deletions(-)

Patch

diff --git a/drivers/media/spi/gs1662.c b/drivers/media/spi/gs1662.c
index d789d82df7c4..f86ef1ca1288 100644
--- a/drivers/media/spi/gs1662.c
+++ b/drivers/media/spi/gs1662.c
@@ -147,11 +147,17 @@  static int gs_read_register(struct spi_device *spi, u16 addr, u16 *value)
 		{
 			.tx_buf = &buf_addr,
 			.len = 2,
-			.delay_usecs = 1,
+			.delay = {
+				.value = 1,
+				.unit = SPI_DELAY_UNIT_USECS
+			},
 		}, {
 			.rx_buf = &buf_value,
 			.len = 2,
-			.delay_usecs = 1,
+			.delay = {
+				.value = 1,
+				.unit = SPI_DELAY_UNIT_USECS
+			},
 		},
 	};
 
@@ -175,11 +181,17 @@  static int gs_write_register(struct spi_device *spi, u16 addr, u16 value)
 		{
 			.tx_buf = &buf_addr,
 			.len = 2,
-			.delay_usecs = 1,
+			.delay = {
+				.value = 1,
+				.unit = SPI_DELAY_UNIT_USECS
+			},
 		}, {
 			.tx_buf = &buf_value,
 			.len = 2,
-			.delay_usecs = 1,
+			.delay = {
+				.value = 1,
+				.unit = SPI_DELAY_UNIT_USECS
+			},
 		},
 	};