diff mbox series

[v5,3/3] arm64: dts: sc7180: Add interconnect provider DT nodes

Message ID 1583241493-21212-4-git-send-email-okukatla@codeaurora.org (mailing list archive)
State New, archived
Headers show
Series Add SC7180 interconnect provider driver | expand

Commit Message

Odelu Kukatla March 3, 2020, 1:18 p.m. UTC 
Add the DT nodes for the network-on-chip interconnect buses found
on sc7180-based platforms.

Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 96 ++++++++++++++++++++++++++++++++++++
 1 file changed, 96 insertions(+)

Comments

Georgi Djakov March 4, 2020, 4:30 p.m. UTC | #1 
On 3/3/20 15:18, Odelu Kukatla wrote:
> Add the DT nodes for the network-on-chip interconnect buses found
> on sc7180-based platforms.
> 
> Signed-off-by: Odelu Kukatla <okukatla@codeaurora.org>

Acked-by: Georgi Djakov <georgi.djakov@linaro.org>

The ack is also valid for v4 of the same patch, just in case it's preferred.

Thanks,
Georgi
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index cc5a94f..27443de 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -7,6 +7,7 @@ 
 
 #include <dt-bindings/clock/qcom,gcc-sc7180.h>
 #include <dt-bindings/clock/qcom,rpmh.h>
+#include <dt-bindings/interconnect/qcom,sc7180.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
 #include <dt-bindings/phy/phy-qcom-qusb2.h>
 #include <dt-bindings/power/qcom-aoss-qmp.h>
@@ -748,6 +749,69 @@ 
 			};
 		};
 
+		config_noc: interconnect@1500000 {
+			compatible = "qcom,sc7180-config-noc";
+			reg = <0 0x01500000 0 0x28000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		system_noc: interconnect@1620000 {
+			compatible = "qcom,sc7180-system-noc";
+			reg = <0 0x01620000 0 0x17080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mc_virt: interconnect@1638000 {
+			compatible = "qcom,sc7180-mc-virt";
+			reg = <0 0x01638000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		qup_virt: interconnect@1650000 {
+			compatible = "qcom,sc7180-qup-virt";
+			reg = <0 0x01650000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre1_noc: interconnect@16e0000 {
+			compatible = "qcom,sc7180-aggre1-noc";
+			reg = <0 0x016e0000 0 0x15080>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		aggre2_noc: interconnect@1705000 {
+			compatible = "qcom,sc7180-aggre2-noc";
+			reg = <0 0x01705000 0 0x9000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		compute_noc: interconnect@170e000 {
+			compatible = "qcom,sc7180-compute-noc";
+			reg = <0 0x0170e000 0 0x6000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		mmss_noc: interconnect@1740000 {
+			compatible = "qcom,sc7180-mmss-noc";
+			reg = <0 0x01740000 0 0x1c100>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		ipa_virt: interconnect@1e00000 {
+			compatible = "qcom,sc7180-ipa-virt";
+			reg = <0 0x01e00000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		tcsr_mutex_regs: syscon@1f40000 {
 			compatible = "syscon";
 			reg = <0 0x01f40000 0 0x40000>;
@@ -1103,6 +1167,13 @@ 
 			};
 		};
 
+		dc_noc: interconnect@9160000 {
+			compatible = "qcom,sc7180-dc-noc";
+			reg = <0 0x09160000 0 0x03200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		system-cache-controller@9200000 {
 			compatible = "qcom,sc7180-llcc";
 			reg = <0 0x09200000 0 0x200000>, <0 0x09600000 0 0x50000>;
@@ -1110,6 +1181,20 @@ 
 			interrupts = <GIC_SPI 582 IRQ_TYPE_LEVEL_HIGH>;
 		};
 
+		gem_noc: interconnect@9680000 {
+			compatible = "qcom,sc7180-gem-noc";
+			reg = <0 0x09680000 0 0x3e200>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
+		npu_noc: interconnect@9990000 {
+			compatible = "qcom,sc7180-npu-noc";
+			reg = <0 0x09990000 0 0x1600>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		usb_1: usb@a6f8800 {
 			compatible = "qcom,sc7180-dwc3", "qcom,dwc3";
 			reg = <0 0x0a6f8800 0 0x400>;
@@ -1154,6 +1239,13 @@ 
 			};
 		};
 
+		camnoc_virt: interconnect@ac00000 {
+			compatible = "qcom,sc7180-camnoc-virt";
+			reg = <0 0x0ac00000 0 0x1000>;
+			#interconnect-cells = <1>;
+			qcom,bcm-voters = <&apps_bcm_voter>;
+		};
+
 		pdc: interrupt-controller@b220000 {
 			compatible = "qcom,sc7180-pdc", "qcom,pdc";
 			reg = <0 0x0b220000 0 0x30000>;
@@ -1481,6 +1573,10 @@ 
 					};
 				};
 			};
+
+			apps_bcm_voter: bcm_voter {
+				compatible = "qcom,bcm-voter";
+			};
 		};
 
 		cpufreq_hw: cpufreq@18323000 {