diff mbox series

[05/10] mmc: sdhci: pxav3: Use quirk instead of custom set_power()

Message ID 20200306103857.23962-6-nsaenzjulienne@suse.de (mailing list archive)
State New, archived
Headers show
Series Raspberry Pi vmmc regulator support | expand

Commit Message

Nicolas Saenz Julienne March 6, 2020, 10:38 a.m. UTC
With the introduction of SDHCI_QUIRK2_SET_BUS_VOLTAGE there is no need
to use a custom set_power() implementation as the quirk takes care of
configuring the bus voltage register even when powering trough a
regulator.

Signed-off-by: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>
---
 drivers/mmc/host/sdhci-pxav3.c | 20 +-------------------
 1 file changed, 1 insertion(+), 19 deletions(-)
diff mbox series

Patch

diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index e55037ceda73..dc4a1e69e6f6 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -297,27 +297,8 @@  static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
 		__func__, uhs, ctrl_2);
 }
 
-static void pxav3_set_power(struct sdhci_host *host, unsigned char mode,
-			    unsigned short vdd)
-{
-	struct mmc_host *mmc = host->mmc;
-	u8 pwr = host->pwr;
-
-	sdhci_set_power_noreg(host, mode, vdd);
-
-	if (host->pwr == pwr)
-		return;
-
-	if (host->pwr == 0)
-		vdd = 0;
-
-	if (!IS_ERR(mmc->supply.vmmc))
-		mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
-}
-
 static const struct sdhci_ops pxav3_sdhci_ops = {
 	.set_clock = sdhci_set_clock,
-	.set_power = pxav3_set_power,
 	.platform_send_init_74_clocks = pxav3_gen_init_74_clocks,
 	.get_max_clock = sdhci_pltfm_clk_get_max_clock,
 	.set_bus_width = sdhci_set_bus_width,
@@ -330,6 +311,7 @@  static const struct sdhci_pltfm_data sdhci_pxav3_pdata = {
 		| SDHCI_QUIRK_NO_ENDATTR_IN_NOPDESC
 		| SDHCI_QUIRK_32BIT_ADMA_SIZE
 		| SDHCI_QUIRK_CAP_CLOCK_BASE_BROKEN,
+	.quirks2 = SDHCI_QUIRK2_SET_BUS_VOLTAGE,
 	.ops = &pxav3_sdhci_ops,
 };