| Message ID | 20200306110025.24747-1-geert+renesas@glider.be (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: renesas: r8a77961: Add thermal nodes | expand |
Hi Geert, Thanks for your work. On 2020-03-06 12:00:25 +0100, Geert Uytterhoeven wrote: > Add a device node for the Thermal Sensor/Chip Internal Voltage Monitor > in the R-Car M3-W+ (R8A77961) SoC, and describe the thermal zones. > > According to the R-Car Gen3 Hardware Manual Errata for Revision 2.00 of > Jan 31, 2020, the thermal parameters for R-Car M3-W+ are the same as for > R-Car M3-W. > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > --- > It's a bit cold in Magnus' lab: > > / # grep . /sys/devices/virtual/thermal/thermal_zone?/temp > /sys/devices/virtual/thermal/thermal_zone0/temp:17000 > /sys/devices/virtual/thermal/thermal_zone1/temp:19000 > /sys/devices/virtual/thermal/thermal_zone2/temp:18000 > --- > arch/arm64/boot/dts/renesas/r8a77961.dtsi | 80 +++++++++++++++++++++++ > 1 file changed, 80 insertions(+) > > diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi > index b6915319a61c8bf0..2f016458f57d3a33 100644 > --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi > +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi > @@ -474,6 +474,20 @@ > #power-domain-cells = <1>; > }; > > + tsc: thermal@e6198000 { > + compatible = "renesas,r8a77961-thermal"; > + reg = <0 0xe6198000 0 0x100>, > + <0 0xe61a0000 0 0x100>, > + <0 0xe61a8000 0 0x100>; > + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, > + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&cpg CPG_MOD 522>; > + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; > + resets = <&cpg 522>; > + #thermal-sensor-cells = <1>; > + }; > + > intc_ex: interrupt-controller@e61c0000 { > #interrupt-cells = <2>; > interrupt-controller; > @@ -785,6 +799,7 @@ > status = "disabled"; > }; > > + This don't looks like it's needed :-) With this fixed, Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> > pwm1: pwm@e6e31000 { > reg = <0 0xe6e31000 0 8>; > #pwm-cells = <2>; > @@ -1073,6 +1088,71 @@ > }; > }; > > + thermal-zones { > + sensor_thermal1: sensor-thermal1 { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + thermal-sensors = <&tsc 0>; > + sustainable-power = <3874>; > + > + trips { > + sensor1_crit: sensor1-crit { > + temperature = <120000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + sensor_thermal2: sensor-thermal2 { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + thermal-sensors = <&tsc 1>; > + sustainable-power = <3874>; > + > + trips { > + sensor2_crit: sensor2-crit { > + temperature = <120000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + > + sensor_thermal3: sensor-thermal3 { > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + thermal-sensors = <&tsc 2>; > + sustainable-power = <3874>; > + > + cooling-maps { > + map0 { > + trip = <&target>; > + cooling-device = <&a57_0 2 4>; > + contribution = <1024>; > + }; > + map1 { > + trip = <&target>; > + cooling-device = <&a53_0 0 2>; > + contribution = <1024>; > + }; > + }; > + trips { > + target: trip-point1 { > + temperature = <100000>; > + hysteresis = <1000>; > + type = "passive"; > + }; > + > + sensor3_crit: sensor3-crit { > + temperature = <120000>; > + hysteresis = <1000>; > + type = "critical"; > + }; > + }; > + }; > + }; > + > timer { > compatible = "arm,armv8-timer"; > interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>, > -- > 2.17.1 >
Hi Niklas, On Sun, Mar 8, 2020 at 5:35 PM Niklas Söderlund <niklas.soderlund@ragnatech.se> wrote: > On 2020-03-06 12:00:25 +0100, Geert Uytterhoeven wrote: > > Add a device node for the Thermal Sensor/Chip Internal Voltage Monitor > > in the R-Car M3-W+ (R8A77961) SoC, and describe the thermal zones. > > > > According to the R-Car Gen3 Hardware Manual Errata for Revision 2.00 of > > Jan 31, 2020, the thermal parameters for R-Car M3-W+ are the same as for > > R-Car M3-W. > > > > Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> > > --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi > > +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi > > @@ -785,6 +799,7 @@ > > status = "disabled"; > > }; > > > > + > > This don't looks like it's needed :-) With this fixed, > > Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Thanks, queued in renesas-devel for v5.7, with the above fixed. Gr{oetje,eeting}s, Geert -- Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@linux-m68k.org In personal conversations with technical people, I call myself a hacker. But when I'm talking to journalists I just say "programmer" or something like that. -- Linus Torvalds
diff --git a/arch/arm64/boot/dts/renesas/r8a77961.dtsi b/arch/arm64/boot/dts/renesas/r8a77961.dtsi index b6915319a61c8bf0..2f016458f57d3a33 100644 --- a/arch/arm64/boot/dts/renesas/r8a77961.dtsi +++ b/arch/arm64/boot/dts/renesas/r8a77961.dtsi @@ -474,6 +474,20 @@ #power-domain-cells = <1>; }; + tsc: thermal@e6198000 { + compatible = "renesas,r8a77961-thermal"; + reg = <0 0xe6198000 0 0x100>, + <0 0xe61a0000 0 0x100>, + <0 0xe61a8000 0 0x100>; + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cpg CPG_MOD 522>; + power-domains = <&sysc R8A77961_PD_ALWAYS_ON>; + resets = <&cpg 522>; + #thermal-sensor-cells = <1>; + }; + intc_ex: interrupt-controller@e61c0000 { #interrupt-cells = <2>; interrupt-controller; @@ -785,6 +799,7 @@ status = "disabled"; }; + pwm1: pwm@e6e31000 { reg = <0 0xe6e31000 0 8>; #pwm-cells = <2>; @@ -1073,6 +1088,71 @@ }; }; + thermal-zones { + sensor_thermal1: sensor-thermal1 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 0>; + sustainable-power = <3874>; + + trips { + sensor1_crit: sensor1-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal2: sensor-thermal2 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 1>; + sustainable-power = <3874>; + + trips { + sensor2_crit: sensor2-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + + sensor_thermal3: sensor-thermal3 { + polling-delay-passive = <250>; + polling-delay = <1000>; + thermal-sensors = <&tsc 2>; + sustainable-power = <3874>; + + cooling-maps { + map0 { + trip = <&target>; + cooling-device = <&a57_0 2 4>; + contribution = <1024>; + }; + map1 { + trip = <&target>; + cooling-device = <&a53_0 0 2>; + contribution = <1024>; + }; + }; + trips { + target: trip-point1 { + temperature = <100000>; + hysteresis = <1000>; + type = "passive"; + }; + + sensor3_crit: sensor3-crit { + temperature = <120000>; + hysteresis = <1000>; + type = "critical"; + }; + }; + }; + }; + timer { compatible = "arm,armv8-timer"; interrupts-extended = <&gic GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(6) | IRQ_TYPE_LEVEL_LOW)>,
Add a device node for the Thermal Sensor/Chip Internal Voltage Monitor in the R-Car M3-W+ (R8A77961) SoC, and describe the thermal zones. According to the R-Car Gen3 Hardware Manual Errata for Revision 2.00 of Jan 31, 2020, the thermal parameters for R-Car M3-W+ are the same as for R-Car M3-W. Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be> --- It's a bit cold in Magnus' lab: / # grep . /sys/devices/virtual/thermal/thermal_zone?/temp /sys/devices/virtual/thermal/thermal_zone0/temp:17000 /sys/devices/virtual/thermal/thermal_zone1/temp:19000 /sys/devices/virtual/thermal/thermal_zone2/temp:18000 --- arch/arm64/boot/dts/renesas/r8a77961.dtsi | 80 +++++++++++++++++++++++ 1 file changed, 80 insertions(+)