[v4,4/4] arm64: dts: qcom: sc7180: Correct qmp phy reset entries
diff mbox series

Message ID 1583928252-21246-5-git-send-email-sanm@codeaurora.org
State Superseded
Headers show
Series
  • Add QMP V3 USB3 PHY support for SC7180
Related show

Commit Message

Sandeep Maheswaram (Temp) March 11, 2020, 12:04 p.m. UTC
The phy reset entries were incorrect.so swapped them.

Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
---
 arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

Comments

Matthias Kaehlcke March 11, 2020, 5:51 p.m. UTC | #1
Hi Sandeep,

This patch landed in Bjorn's tree (arm64-for-5.7 branch). In case you have
to re-spin the series there is no need to include it.

On Wed, Mar 11, 2020 at 05:34:12PM +0530, Sandeep Maheswaram wrote:
> The phy reset entries were incorrect.so swapped them.
> 
> Signed-off-by: Sandeep Maheswaram <sanm@codeaurora.org>
> Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
> ---
>  arch/arm64/boot/dts/qcom/sc7180.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
> 
> diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> index 9d112aa..253274d 100644
> --- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
> @@ -1306,8 +1306,8 @@
>  				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
>  			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
>  
> -			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
> -				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
> +			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
> +				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
>  			reset-names = "phy", "common";
>  
>  			usb_1_ssphy: phy@88e9200 {
> -- 
> QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
> of Code Aurora Forum, hosted by The Linux Foundation
>

Patch
diff mbox series

diff --git a/arch/arm64/boot/dts/qcom/sc7180.dtsi b/arch/arm64/boot/dts/qcom/sc7180.dtsi
index 9d112aa..253274d 100644
--- a/arch/arm64/boot/dts/qcom/sc7180.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7180.dtsi
@@ -1306,8 +1306,8 @@ 
 				 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
 			clock-names = "aux", "cfg_ahb", "ref", "com_aux";
 
-			resets = <&gcc GCC_USB3_DP_PHY_PRIM_BCR>,
-				 <&gcc GCC_USB3_PHY_PRIM_BCR>;
+			resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
+				 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
 			reset-names = "phy", "common";
 
 			usb_1_ssphy: phy@88e9200 {