[v1,12/36] dt-bindings: display: convert jdi,lt070me05000 to DT Schema
diff mbox series

Message ID 20200315134416.16527-13-sam@ravnborg.org
State New
Headers show
Series
  • dt-bindings: display: convert remaning panel bindings to DT Schema
Related show

Commit Message

Sam Ravnborg March 15, 2020, 1:43 p.m. UTC
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Vinay Simha BN <simhavcs@gmail.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
---
 .../display/panel/jdi,lt070me05000.txt        | 31 ---------
 .../display/panel/jdi,lt070me05000.yaml       | 69 +++++++++++++++++++
 2 files changed, 69 insertions(+), 31 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
 create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml

Comments

Vinay Simha B N March 16, 2020, 8:59 a.m. UTC | #1
sam,

Reviewed-by: Vinay Simha BN <simhavcs@gmail.com>

Thanks.

On Sun, Mar 15, 2020 at 7:14 PM Sam Ravnborg <sam@ravnborg.org> wrote:
>
> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> Cc: Vinay Simha BN <simhavcs@gmail.com>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> ---
>  .../display/panel/jdi,lt070me05000.txt        | 31 ---------
>  .../display/panel/jdi,lt070me05000.yaml       | 69 +++++++++++++++++++
>  2 files changed, 69 insertions(+), 31 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
>  create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
>
> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> deleted file mode 100644
> index 4989c91d505f..000000000000
> --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -JDI model LT070ME05000 1200x1920 7" DSI Panel
> -
> -Required properties:
> -- compatible: should be "jdi,lt070me05000"
> -- vddp-supply: phandle of the regulator that provides the supply voltage
> -  Power IC supply (3-5V)
> -- iovcc-supply: phandle of the regulator that provides the supply voltage
> -  IOVCC , power supply for LCM (1.8V)
> -- enable-gpios: phandle of gpio for enable line
> -  LED_EN, LED backlight enable, High active
> -- reset-gpios: phandle of gpio for reset line
> -  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
> -  XRES, Reset, Low active
> -- dcdc-en-gpios: phandle of the gpio for power ic line
> -  Power IC supply enable, High active
> -
> -Example:
> -
> -       dsi0: qcom,mdss_dsi@4700000 {
> -               panel@0 {
> -                       compatible = "jdi,lt070me05000";
> -                       reg = <0>;
> -
> -                       vddp-supply = <&pm8921_l17>;
> -                       iovcc-supply = <&pm8921_lvs7>;
> -
> -                       enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
> -                       reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
> -                       dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
> -               };
> -       };
> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
> new file mode 100644
> index 000000000000..e0abf68ecb19
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: JDI model LT070ME05000 1200x1920 7" DSI Panel
> +
> +maintainers:
> +  - Vinay Simha BN <simhavcs@gmail.com>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: jdi,lt070me05000
> +
> +  enable-gpios: true
> +  reg: true
> +  reset-gpios: true
> +
> +  vddp-supply:
> +    description: |
> +      The regulator that provides the supply voltage Power IC supply (3-5V)
> +
> +  iovcc-supply:
> +    description: |
> +      The regulator that provides the supply voltage IOVCC,
> +      power supply for LCM (1.8V)
> +
> +  dcdc-en-gpios:
> +    description: |
> +      phandle of the gpio for power ic line
> +      Power IC supply enable, High active
> +
> +required:
> +  - compatible
> +  - reg
> +  - vddp-supply
> +  - iovcc-supply
> +  - enable-gpios
> +  - reset-gpios
> +  - dcdc-en-gpios
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi: qcom,mdss_dsi@4700000 {
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        panel@0 {
> +            compatible = "jdi,lt070me05000";
> +            reg = <0>;
> +
> +            vddp-supply = <&pm8921_l17>;
> +            iovcc-supply = <&pm8921_lvs7>;
> +
> +            enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
> +            reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
> +            dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
> +        };
> +    };
> +
> +...
> --
> 2.20.1
>
Rob Herring March 19, 2020, 2:53 a.m. UTC | #2
On Sun, Mar 15, 2020 at 02:43:52PM +0100, Sam Ravnborg wrote:
> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
> Cc: Vinay Simha BN <simhavcs@gmail.com>
> Cc: Thierry Reding <thierry.reding@gmail.com>
> Cc: Sam Ravnborg <sam@ravnborg.org>
> ---
>  .../display/panel/jdi,lt070me05000.txt        | 31 ---------
>  .../display/panel/jdi,lt070me05000.yaml       | 69 +++++++++++++++++++
>  2 files changed, 69 insertions(+), 31 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
>  create mode 100644 Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
> 
> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> deleted file mode 100644
> index 4989c91d505f..000000000000
> --- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
> +++ /dev/null
> @@ -1,31 +0,0 @@
> -JDI model LT070ME05000 1200x1920 7" DSI Panel
> -
> -Required properties:
> -- compatible: should be "jdi,lt070me05000"
> -- vddp-supply: phandle of the regulator that provides the supply voltage
> -  Power IC supply (3-5V)
> -- iovcc-supply: phandle of the regulator that provides the supply voltage
> -  IOVCC , power supply for LCM (1.8V)
> -- enable-gpios: phandle of gpio for enable line
> -  LED_EN, LED backlight enable, High active
> -- reset-gpios: phandle of gpio for reset line
> -  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
> -  XRES, Reset, Low active
> -- dcdc-en-gpios: phandle of the gpio for power ic line
> -  Power IC supply enable, High active
> -
> -Example:
> -
> -	dsi0: qcom,mdss_dsi@4700000 {
> -		panel@0 {
> -			compatible = "jdi,lt070me05000";
> -			reg = <0>;
> -
> -			vddp-supply = <&pm8921_l17>;
> -			iovcc-supply = <&pm8921_lvs7>;
> -
> -			enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
> -			reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
> -			dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
> -		};
> -	};
> diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
> new file mode 100644
> index 000000000000..e0abf68ecb19
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
> @@ -0,0 +1,69 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: JDI model LT070ME05000 1200x1920 7" DSI Panel
> +
> +maintainers:
> +  - Vinay Simha BN <simhavcs@gmail.com>
> +
> +allOf:
> +  - $ref: panel-common.yaml#
> +
> +properties:
> +  compatible:
> +    const: jdi,lt070me05000
> +
> +  enable-gpios: true
> +  reg: true
> +  reset-gpios: true
> +
> +  vddp-supply:
> +    description: |
> +      The regulator that provides the supply voltage Power IC supply (3-5V)
> +
> +  iovcc-supply:
> +    description: |
> +      The regulator that provides the supply voltage IOVCC,
> +      power supply for LCM (1.8V)
> +
> +  dcdc-en-gpios:
> +    description: |
> +      phandle of the gpio for power ic line
> +      Power IC supply enable, High active
> +
> +required:
> +  - compatible
> +  - reg
> +  - vddp-supply
> +  - iovcc-supply
> +  - enable-gpios
> +  - reset-gpios
> +  - dcdc-en-gpios
> +
> +additionalProperties: false
> +
> +examples:
> +  - |
> +    #include <dt-bindings/gpio/gpio.h>
> +
> +    dsi: qcom,mdss_dsi@4700000 {

dsi {

> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +
> +        panel@0 {
> +            compatible = "jdi,lt070me05000";
> +            reg = <0>;
> +
> +            vddp-supply = <&pm8921_l17>;
> +            iovcc-supply = <&pm8921_lvs7>;
> +
> +            enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
> +            reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
> +            dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
> +        };
> +    };
> +
> +...
> -- 
> 2.20.1
>

Patch
diff mbox series

diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
deleted file mode 100644
index 4989c91d505f..000000000000
--- a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.txt
+++ /dev/null
@@ -1,31 +0,0 @@ 
-JDI model LT070ME05000 1200x1920 7" DSI Panel
-
-Required properties:
-- compatible: should be "jdi,lt070me05000"
-- vddp-supply: phandle of the regulator that provides the supply voltage
-  Power IC supply (3-5V)
-- iovcc-supply: phandle of the regulator that provides the supply voltage
-  IOVCC , power supply for LCM (1.8V)
-- enable-gpios: phandle of gpio for enable line
-  LED_EN, LED backlight enable, High active
-- reset-gpios: phandle of gpio for reset line
-  This should be 8mA, gpio can be configured using mux, pinctrl, pinctrl-names
-  XRES, Reset, Low active
-- dcdc-en-gpios: phandle of the gpio for power ic line
-  Power IC supply enable, High active
-
-Example:
-
-	dsi0: qcom,mdss_dsi@4700000 {
-		panel@0 {
-			compatible = "jdi,lt070me05000";
-			reg = <0>;
-
-			vddp-supply = <&pm8921_l17>;
-			iovcc-supply = <&pm8921_lvs7>;
-
-			enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
-			reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
-			dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
-		};
-	};
diff --git a/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
new file mode 100644
index 000000000000..e0abf68ecb19
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/jdi,lt070me05000.yaml
@@ -0,0 +1,69 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/jdi,lt070me05000.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: JDI model LT070ME05000 1200x1920 7" DSI Panel
+
+maintainers:
+  - Vinay Simha BN <simhavcs@gmail.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: jdi,lt070me05000
+
+  enable-gpios: true
+  reg: true
+  reset-gpios: true
+
+  vddp-supply:
+    description: |
+      The regulator that provides the supply voltage Power IC supply (3-5V)
+
+  iovcc-supply:
+    description: |
+      The regulator that provides the supply voltage IOVCC,
+      power supply for LCM (1.8V)
+
+  dcdc-en-gpios:
+    description: |
+      phandle of the gpio for power ic line
+      Power IC supply enable, High active
+
+required:
+  - compatible
+  - reg
+  - vddp-supply
+  - iovcc-supply
+  - enable-gpios
+  - reset-gpios
+  - dcdc-en-gpios
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi: qcom,mdss_dsi@4700000 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        panel@0 {
+            compatible = "jdi,lt070me05000";
+            reg = <0>;
+
+            vddp-supply = <&pm8921_l17>;
+            iovcc-supply = <&pm8921_lvs7>;
+
+            enable-gpios = <&pm8921_gpio 36 GPIO_ACTIVE_HIGH>;
+            reset-gpios = <&tlmm_pinmux 54 GPIO_ACTIVE_LOW>;
+            dcdc-en-gpios = <&pm8921_gpio 23 GPIO_ACTIVE_HIGH>;
+        };
+    };
+
+...