Message ID | 20200318082739.9833-2-j-keerthy@ti.com (mailing list archive) |
---|---|
State | Superseded, archived |
Headers | show |
Series | thermal: k3: Add support for bandgap sensors | expand |
On 18/03/20 1:57 pm, Keerthy wrote: > Add VTM bindings documentation. In the Voltage Thermal > Management Module(VTM), K3 AM654 supplies a voltage > reference and a temperature sensor feature that are gathered in the band > gap voltage and temperature sensor (VBGAPTS) module. The band > gap provides current and voltage reference for its internal > circuits and other analog IP blocks. The analog-to-digital > converter (ADC) produces an output value that is proportional > to the silicon temperature. Numbering is bad. I will resend in a bit. > > Signed-off-by: Keerthy <j-keerthy@ti.com> > --- > .../bindings/thermal/ti,am654-thermal.yaml | 56 +++++++++++++++++++ > 1 file changed, 56 insertions(+) > create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml > > diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml > new file mode 100644 > index 000000000000..d241b65d6072 > --- /dev/null > +++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml > @@ -0,0 +1,56 @@ > +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: Texas Instruments AM654 VTM (DTS) binding > + > +maintainers: > + - Keerthy <j-keerthy@ti.com> > + > +properties: > + compatible: > + const: ti,am654-vtm > + > + reg: > + maxItems: 1 > + > + power-domains: > + maxItems: 1 > + > + "#thermal-sensor-cells": > + const: 1 > + > +required: > + - "#thermal-sensor-cells" > + - compatible > + - reg > + - power-domains > + > +additionalProperties: false > + > +examples: > + - | > + #include <dt-bindings/soc/ti,sci_pm_domain.h> > + vtm: thermal@42050000 { > + compatible = "ti,am654-vtm"; > + reg = <0x0 0x42050000 0x0 0x25c>; > + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; > + #thermal-sensor-cells = <1>; > + }; > + > + mpu0_thermal: mpu0_thermal { > + polling-delay-passive = <250>; /* milliseconds */ > + polling-delay = <500>; /* milliseconds */ > + thermal-sensors = <&vtm0 0>; > + > + trips { > + mpu0_crit: mpu0_crit { > + temperature = <125000>; /* milliCelsius */ > + hysteresis = <2000>; /* milliCelsius */ > + type = "critical"; > + }; > + }; > + }; > +... >
diff --git a/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml new file mode 100644 index 000000000000..d241b65d6072 --- /dev/null +++ b/Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml @@ -0,0 +1,56 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/ti,am654-thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Texas Instruments AM654 VTM (DTS) binding + +maintainers: + - Keerthy <j-keerthy@ti.com> + +properties: + compatible: + const: ti,am654-vtm + + reg: + maxItems: 1 + + power-domains: + maxItems: 1 + + "#thermal-sensor-cells": + const: 1 + +required: + - "#thermal-sensor-cells" + - compatible + - reg + - power-domains + +additionalProperties: false + +examples: + - | + #include <dt-bindings/soc/ti,sci_pm_domain.h> + vtm: thermal@42050000 { + compatible = "ti,am654-vtm"; + reg = <0x0 0x42050000 0x0 0x25c>; + power-domains = <&k3_pds 80 TI_SCI_PD_EXCLUSIVE>; + #thermal-sensor-cells = <1>; + }; + + mpu0_thermal: mpu0_thermal { + polling-delay-passive = <250>; /* milliseconds */ + polling-delay = <500>; /* milliseconds */ + thermal-sensors = <&vtm0 0>; + + trips { + mpu0_crit: mpu0_crit { + temperature = <125000>; /* milliCelsius */ + hysteresis = <2000>; /* milliCelsius */ + type = "critical"; + }; + }; + }; +...
Add VTM bindings documentation. In the Voltage Thermal Management Module(VTM), K3 AM654 supplies a voltage reference and a temperature sensor feature that are gathered in the band gap voltage and temperature sensor (VBGAPTS) module. The band gap provides current and voltage reference for its internal circuits and other analog IP blocks. The analog-to-digital converter (ADC) produces an output value that is proportional to the silicon temperature. Signed-off-by: Keerthy <j-keerthy@ti.com> --- .../bindings/thermal/ti,am654-thermal.yaml | 56 +++++++++++++++++++ 1 file changed, 56 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/ti,am654-thermal.yaml