new file mode 100644
@@ -0,0 +1,48 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/* Copyright (C) 2020 ROHM Semiconductors */
+
+#ifndef LINEAR_RANGE_H
+#define LINEAR_RANGE_H
+
+#include <linux/types.h>
+
+/**
+ * struct linear_range - table of selector - value pairs
+ *
+ * Define a lookup-table for range of values. Intended to help when looking
+ * for a register value matching certaing physical measure (like voltage).
+ * Usable when increment of one in register always results a constant increment
+ * of the physical measure (like voltage).
+ *
+ * @min: Lowest value in range
+ * @min_sel: Lowest selector for range
+ * @max_sel: Highest selector for range
+ * @step: Value step size
+ */
+struct linear_range {
+ unsigned int min;
+ unsigned int min_sel;
+ unsigned int max_sel;
+ unsigned int step;
+};
+
+unsigned int linear_range_values_in_range(const struct linear_range *r);
+unsigned int linear_range_values_in_range_array(const struct linear_range *r,
+ int ranges);
+unsigned int linear_range_get_max_value(const struct linear_range *r);
+
+int linear_range_get_value(const struct linear_range *r, unsigned int selector,
+ unsigned int *val);
+int linear_range_get_value_array(const struct linear_range *r, int ranges,
+ unsigned int selector, unsigned int *val);
+int linear_range_get_selector_low(const struct linear_range *r,
+ unsigned int val, unsigned int *selector,
+ bool *found);
+int linear_range_get_selector_high(const struct linear_range *r,
+ unsigned int val, unsigned int *selector,
+ bool *found);
+int linear_range_get_selector_low_array(const struct linear_range *r,
+ int ranges, unsigned int val,
+ unsigned int *selector, bool *found);
+
+#endif
@@ -19,6 +19,9 @@ config RAID6_PQ_BENCHMARK
Benchmark all available RAID6 PQ functions on init and choose the
fastest one.
+config LINEAR_RANGES
+ tristate
+
config PACKING
bool "Generic bitfield packing and unpacking"
default n
@@ -122,6 +122,7 @@ obj-$(CONFIG_DEBUG_LIST) += list_debug.o
obj-$(CONFIG_DEBUG_OBJECTS) += debugobjects.o
obj-$(CONFIG_BITREVERSE) += bitrev.o
+obj-$(CONFIG_LINEAR_RANGES) += linear_ranges.o
obj-$(CONFIG_PACKING) += packing.o
obj-$(CONFIG_CRC_CCITT) += crc-ccitt.o
obj-$(CONFIG_CRC16) += crc16.o
new file mode 100644
@@ -0,0 +1,246 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * linear_ranges.c -- helpers to map values in a linear range to range index
+ *
+ * Original idea borrowed from regulator framework
+ *
+ * It might be useful if we could support also inversely proportional ranges?
+ * Copyright 2020 ROHM Semiconductors
+ */
+
+#include <linux/errno.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/linear_range.h>
+
+/**
+ * linear_range_values_in_range - return the amount of values in a range
+ *
+ * @r: pointer to linear range where values are counted
+ *
+ * Compute the amount of values in range pointed by @r. Note, values can
+ * be all equal - range with selectors 0,...,2 with step 0 still contains
+ * 3 values even though they are all equal.
+ *
+ * Return: the amount of values in range pointed by @r
+ */
+unsigned int linear_range_values_in_range(const struct linear_range *r)
+{
+ if (!r)
+ return 0;
+ return r->max_sel - r->min_sel + 1;
+}
+EXPORT_SYMBOL_GPL(linear_range_values_in_range);
+
+/**
+ * linear_range_values_in_range_array - return the amount of values in ranges
+ *
+ * @r: pointer to array of linear ranges where values are counted
+ * @ranges: amount of ranges we include in computation.
+ *
+ * Compute the amount of values in ranges pointed by @r. Note, values can
+ * be all equal - range with selectors 0,...,2 with step 0 still contains
+ * 3 values even though they are all equal.
+ *
+ * Return: the amount of values in first @ranges ranges pointed by @r
+ */
+unsigned int linear_range_values_in_range_array(const struct linear_range *r,
+ int ranges)
+{
+ int i, values_in_range = 0;
+
+ for (i = 0; i < ranges; i++) {
+ int values;
+
+ values = linear_range_values_in_range(&r[i]);
+ if (!values)
+ return values;
+
+ values_in_range += values;
+ }
+ return values_in_range;
+}
+EXPORT_SYMBOL_GPL(linear_range_values_in_range_array);
+
+/**
+ * linear_range_get_max_value - return the largest value in a range
+ *
+ * @r: pointer to linear range where value is looked from
+ *
+ * Return: the largest value in the given range
+ */
+unsigned int linear_range_get_max_value(const struct linear_range *r)
+{
+ return r->min + (r->max_sel - r->min_sel) * r->step;
+}
+EXPORT_SYMBOL_GPL(linear_range_get_max_value);
+
+/**
+ * linear_range_get_value - fetch a value from given range
+ *
+ * @r: pointer to linear range where value is looked from
+ * @selector: selector for which the value is searched
+ * @val: address where found value is updated
+ *
+ * Search given ranges for value which matches given selector.
+ *
+ * Return: 0 on success, -EINVAL given selector is not found from any of the
+ * ranges.
+ */
+int linear_range_get_value(const struct linear_range *r, unsigned int selector,
+ unsigned int *val)
+{
+ if (r->min_sel > selector || r->max_sel < selector)
+ return -EINVAL;
+
+ *val = r->min + (selector - r->min_sel) * r->step;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(linear_range_get_value);
+
+/**
+ * linear_range_get_value_array - fetch a value from array of ranges
+ *
+ * @r: pointer to array of linear ranges where value is looked from
+ * @ranges: amount of ranges in an array
+ * @selector: selector for which the value is searched
+ * @val: address where found value is updated
+ *
+ * Search through an array of ranges for value which matches given selector.
+ *
+ * Return: 0 on success, -EINVAL given selector is not found from any of the
+ * ranges.
+ */
+int linear_range_get_value_array(const struct linear_range *r, int ranges,
+ unsigned int selector, unsigned int *val)
+{
+ int i;
+
+ for (i = 0; i < ranges; i++)
+ if (r[i].min_sel <= selector && r[i].max_sel >= selector)
+ return linear_range_get_value(&r[i], selector, val);
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL_GPL(linear_range_get_value_array);
+
+/**
+ * linear_range_get_selector_low - return linear range selector for value
+ *
+ * @r: pointer to linear range where selector is looked from
+ * @val: value for which the selector is searched
+ * @selector: address where found selector value is updated
+ * @found: flag to indicate that given value was in the range
+ *
+ * Return selector which which range value is closest match for given
+ * input value. Value is matching if it is equal or smaller than given
+ * value. If given value is in the range, then @found is set true.
+ *
+ * Return: 0 on success, -EINVAL if range is invalid or does not contain
+ * value smaller or equal to given value
+ */
+int linear_range_get_selector_low(const struct linear_range *r,
+ unsigned int val, unsigned int *selector,
+ bool *found)
+{
+ *found = false;
+
+ if (r->min > val)
+ return -EINVAL;
+
+ if (linear_range_get_max_value(r) >= val)
+ *found = true;
+
+ if (!r->step)
+ *selector = r->min_sel;
+ else
+ *selector = (val - r->min) / r->step + r->min_sel;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(linear_range_get_selector_low);
+
+/**
+ * linear_range_get_selector_low_array - return linear range selector for value
+ *
+ * @r: pointer to array of linear ranges where selector is looked from
+ * @ranges: amount of ranges to scan from array
+ * @val: value for which the selector is searched
+ * @selector: address where found selector value is updated
+ * @found: flag to indicate that given value was in the range
+ *
+ * Scan array of ranges for selector which which range value matches given
+ * input value. Value is matching if it is equal or smaller than given
+ * value. If given value is found to be in a range scannins is stopped and
+ * @found is set true. If a range with values smaller than given value is found
+ * but the range max is being smaller than given value, then the ranges
+ * biggest selector is updated to @selector but scanning ranges is continued
+ * and @found is set to false.
+ *
+ * Return: 0 on success, -EINVAL if range array is invalid or does not contain
+ * range with a value smaller or equal to given value
+ */
+int linear_range_get_selector_low_array(const struct linear_range *r,
+ int ranges, unsigned int val,
+ unsigned int *selector, bool *found)
+{
+ int i;
+ int ret = -EINVAL;
+
+ for (i = 0; i < ranges; i++) {
+ int tmpret;
+
+ tmpret = linear_range_get_selector_low(&r[i], val, selector,
+ found);
+
+ if (!tmpret)
+ ret = 0;
+
+ if (*found)
+ break;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(linear_range_get_selector_low_array);
+
+/**
+ * linear_range_get_selector_high - return linear range selector for value
+ *
+ * @r: pointer to linear range where selector is looked from
+ * @val: value for which the selector is searched
+ * @selector: address where found selector value is updated
+ * @found: flag to indicate that given value was in the range
+ *
+ * Return selector which which range value is closest match for given
+ * input value. Value is matching if it is equal or higher than given
+ * value. If given value is in the range, then @found is set true.
+ *
+ * Return: 0 on success, -EINVAL if range is invalid or does not contain
+ * value greater or equal to given value
+ */
+int linear_range_get_selector_high(const struct linear_range *r,
+ unsigned int val, unsigned int *selector,
+ bool *found)
+{
+ *found = false;
+
+ if (linear_range_get_max_value(r) < val)
+ return -EINVAL;
+
+ if (r->min <= val) {
+ *found = true;
+ } else {
+ *selector = r->min_sel;
+ return 0;
+ }
+
+ if (!r->step)
+ *selector = r->max_sel;
+ else
+ *selector = DIV_ROUND_UP(val - r->min, r->step) + r->min_sel;
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(linear_range_get_selector_high);
Many devices have control registers which control some measurable property. Often a register contains control field so that change in this field causes linear change in the controlled property. It is not a rare case that user wants to give 'meaningful' control values and driver needs to convert them to register field values. Even more often user wants to 'see' the currently set value - again in meaningful units - and driver needs to convert the values it reads from register to these meaningful units. Examples of this include: - regulators, voltage/current configurations - power, voltage/current configurations - clk(?) NCOs and maybe others I can't think of right now. Provide a linear_range helper which can do conversion from user value to register value 'selector'. The idea here is stolen from regulator framework and patches refactoring the regulator helpers to use this are following. Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com> --- include/linux/linear_range.h | 48 +++++++ lib/Kconfig | 3 + lib/Makefile | 1 + lib/linear_ranges.c | 246 +++++++++++++++++++++++++++++++++++ 4 files changed, 298 insertions(+) create mode 100644 include/linux/linear_range.h create mode 100644 lib/linear_ranges.c