@@ -1215,6 +1215,12 @@ static blk_status_t sd_setup_read_write_cmnd(struct scsi_cmnd *cmd)
else
protect = 0;
+ if (req_op(rq) == REQ_OP_ZONE_APPEND) {
+ ret = sd_zbc_prepare_zone_append(cmd, &lba, nr_blocks);
+ if (ret)
+ return ret;
+ }
+
if (protect && sdkp->protection_type == T10_PI_TYPE2_PROTECTION) {
ret = sd_setup_rw32_cmnd(cmd, write, lba, nr_blocks,
protect | fua);
@@ -1287,6 +1293,7 @@ static blk_status_t sd_init_command(struct scsi_cmnd *cmd)
return sd_setup_flush_cmnd(cmd);
case REQ_OP_READ:
case REQ_OP_WRITE:
+ case REQ_OP_ZONE_APPEND:
return sd_setup_read_write_cmnd(cmd);
case REQ_OP_ZONE_RESET:
return sd_zbc_setup_zone_mgmt_cmnd(cmd, ZO_RESET_WRITE_POINTER,
@@ -2055,7 +2062,7 @@ static int sd_done(struct scsi_cmnd *SCpnt)
out:
if (sd_is_zoned(sdkp))
- sd_zbc_complete(SCpnt, good_bytes, &sshdr);
+ good_bytes = sd_zbc_complete(SCpnt, good_bytes, &sshdr);
SCSI_LOG_HLCOMPLETE(1, scmd_printk(KERN_INFO, SCpnt,
"sd_done: completed %d of %d bytes\n",
@@ -3370,6 +3377,8 @@ static int sd_probe(struct device *dev)
sdkp->first_scan = 1;
sdkp->max_medium_access_timeouts = SD_MAX_MEDIUM_TIMEOUTS;
+ sd_zbc_init_disk(sdkp);
+
sd_revalidate_disk(gd);
gd->flags = GENHD_FL_EXT_DEVT;
@@ -3663,19 +3672,26 @@ static int __init init_sd(void)
if (!sd_page_pool) {
printk(KERN_ERR "sd: can't init discard page pool\n");
err = -ENOMEM;
- goto err_out_ppool;
+ goto err_out_cdb_pool;
}
+ err = sd_zbc_init();
+ if (err)
+ goto err_out_ppool;
+
err = scsi_register_driver(&sd_template.gendrv);
if (err)
- goto err_out_driver;
+ goto err_out_zbc;
return 0;
-err_out_driver:
- mempool_destroy(sd_page_pool);
+err_out_zbc:
+ sd_zbc_exit();
err_out_ppool:
+ mempool_destroy(sd_page_pool);
+
+err_out_cdb_pool:
mempool_destroy(sd_cdb_pool);
err_out_cache:
@@ -3705,6 +3721,8 @@ static void __exit exit_sd(void)
mempool_destroy(sd_page_pool);
kmem_cache_destroy(sd_cdb_cache);
+ sd_zbc_exit();
+
class_unregister(&sd_disk_class);
for (i = 0; i < SD_MAJORS; i++) {
@@ -79,6 +79,7 @@ struct scsi_disk {
u32 zones_optimal_open;
u32 zones_optimal_nonseq;
u32 zones_max_open;
+ spinlock_t zone_wp_ofst_lock;
#endif
atomic_t openers;
sector_t capacity; /* size in logical blocks */
@@ -207,17 +208,33 @@ static inline int sd_is_zoned(struct scsi_disk *sdkp)
#ifdef CONFIG_BLK_DEV_ZONED
+int __init sd_zbc_init(void);
+void sd_zbc_exit(void);
+
+void sd_zbc_init_disk(struct scsi_disk *sdkp);
extern int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buffer);
extern void sd_zbc_print_zones(struct scsi_disk *sdkp);
blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
unsigned char op, bool all);
-extern void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
- struct scsi_sense_hdr *sshdr);
+unsigned int sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
+ struct scsi_sense_hdr *sshdr);
int sd_zbc_report_zones(struct gendisk *disk, sector_t sector,
unsigned int nr_zones, report_zones_cb cb, void *data);
+blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd, sector_t *lba,
+ unsigned int nr_blocks);
+
#else /* CONFIG_BLK_DEV_ZONED */
+static inline int sd_zbc_init(void)
+{
+ return 0;
+}
+
+static inline void sd_zbc_exit(void) {}
+
+static inline void sd_zbc_init_disk(struct scsi_disk *sdkp) {}
+
static inline int sd_zbc_read_zones(struct scsi_disk *sdkp,
unsigned char *buf)
{
@@ -233,9 +250,18 @@ static inline blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
return BLK_STS_TARGET;
}
-static inline void sd_zbc_complete(struct scsi_cmnd *cmd,
- unsigned int good_bytes,
- struct scsi_sense_hdr *sshdr) {}
+static inline unsigned int sd_zbc_complete(struct scsi_cmnd *cmd,
+ unsigned int good_bytes, struct scsi_sense_hdr *sshdr)
+{
+ return 0;
+}
+
+static inline blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd,
+ sector_t *lba,
+ unsigned int nr_blocks)
+{
+ return BLK_STS_TARGET;
+}
#define sd_zbc_report_zones NULL
@@ -19,6 +19,11 @@
#include "sd.h"
+static struct kmem_cache *sd_zbc_zone_work_cache;
+static mempool_t *sd_zbc_zone_work_pool;
+
+#define SD_ZBC_ZONE_WORK_MEMPOOL_SIZE 8
+
static int sd_zbc_parse_report(struct scsi_disk *sdkp, u8 *buf,
unsigned int idx, report_zones_cb cb, void *data)
{
@@ -229,6 +234,152 @@ static blk_status_t sd_zbc_cmnd_checks(struct scsi_cmnd *cmd)
return BLK_STS_OK;
}
+#define SD_ZBC_INVALID_WP_OFST ~(0u)
+#define SD_ZBC_UPDATING_WP_OFST (SD_ZBC_INVALID_WP_OFST - 1)
+
+struct sd_zbc_zone_work {
+ struct work_struct work;
+ struct scsi_disk *sdkp;
+ unsigned int zno;
+ char buf[SD_BUF_SIZE];
+};
+
+static int sd_zbc_update_wp_ofst_cb(struct blk_zone *zone, unsigned int idx,
+ void *data)
+{
+ struct sd_zbc_zone_work *zwork = data;
+ struct scsi_disk *sdkp = zwork->sdkp;
+ struct request_queue *q = sdkp->disk->queue;
+ int ret;
+
+ spin_lock_bh(&sdkp->zone_wp_ofst_lock);
+ ret = blk_get_zone_wp_offset(zone, &q->seq_zones_wp_ofst[zwork->zno]);
+ if (ret)
+ q->seq_zones_wp_ofst[zwork->zno] = SD_ZBC_INVALID_WP_OFST;
+ spin_unlock_bh(&sdkp->zone_wp_ofst_lock);
+
+ return ret;
+}
+
+static void sd_zbc_update_wp_ofst_workfn(struct work_struct *work)
+{
+ struct sd_zbc_zone_work *zwork;
+ struct scsi_disk *sdkp;
+ int ret;
+
+ zwork = container_of(work, struct sd_zbc_zone_work, work);
+ sdkp = zwork->sdkp;
+
+ ret = sd_zbc_do_report_zones(sdkp, zwork->buf, SD_BUF_SIZE,
+ zwork->zno * sdkp->zone_blocks, true);
+ if (!ret)
+ sd_zbc_parse_report(sdkp, zwork->buf + 64, 0,
+ sd_zbc_update_wp_ofst_cb, zwork);
+
+ mempool_free(zwork, sd_zbc_zone_work_pool);
+ scsi_device_put(sdkp->device);
+}
+
+static blk_status_t sd_zbc_update_wp_ofst(struct scsi_disk *sdkp,
+ unsigned int zno)
+{
+ struct sd_zbc_zone_work *zwork;
+
+ /*
+ * We are about to schedule work to update a zone write pointer offset,
+ * which will cause the zone append command to be requeued. So make
+ * sure that the scsi device does not go away while the work is
+ * being processed.
+ */
+ if (scsi_device_get(sdkp->device))
+ return BLK_STS_IOERR;
+
+ zwork = mempool_alloc(sd_zbc_zone_work_pool, GFP_ATOMIC);
+ if (!zwork) {
+ /* Retry later */
+ scsi_device_put(sdkp->device);
+ return BLK_STS_RESOURCE;
+ }
+
+ memset(zwork, 0, sizeof(struct sd_zbc_zone_work));
+ INIT_WORK(&zwork->work, sd_zbc_update_wp_ofst_workfn);
+ zwork->sdkp = sdkp;
+ zwork->zno = zno;
+
+ sdkp->disk->queue->seq_zones_wp_ofst[zno] = SD_ZBC_UPDATING_WP_OFST;
+
+ schedule_work(&zwork->work);
+
+ return BLK_STS_RESOURCE;
+}
+
+/**
+ * sd_zbc_prepare_zone_append() - Prepare an emulated ZONE_APPEND command.
+ * @cmd: the command to setup
+ * @lba: the LBA to patch
+ * @nr_blocks: the number of LBAs to be written
+ *
+ * Called from sd_setup_read_write_cmnd() for REQ_OP_ZONE_APPEND.
+ * @sd_zbc_prepare_zone_append() handles the necessary zone wrote locking and
+ * patching of the lba for an emulated ZONE_APPEND command.
+ *
+ * In case the cached write pointer offset is %SD_ZBC_INVALID_WP_OFST it will
+ * schedule a REPORT ZONES command and return BLK_STS_IOERR.
+ */
+blk_status_t sd_zbc_prepare_zone_append(struct scsi_cmnd *cmd, sector_t *lba,
+ unsigned int nr_blocks)
+{
+ struct request *rq = cmd->request;
+ struct scsi_disk *sdkp = scsi_disk(rq->rq_disk);
+ unsigned int wp_ofst, zno = blk_rq_zone_no(rq);
+ blk_status_t ret;
+
+ ret = sd_zbc_cmnd_checks(cmd);
+ if (ret != BLK_STS_OK)
+ return ret;
+
+ if (!blk_rq_zone_is_seq(rq))
+ return BLK_STS_IOERR;
+
+ /* Unlock of the write lock will happen in sd_zbc_complete() */
+ if (!blk_req_zone_write_trylock(rq))
+ return BLK_STS_ZONE_RESOURCE;
+
+ spin_lock_bh(&sdkp->zone_wp_ofst_lock);
+
+ wp_ofst = rq->q->seq_zones_wp_ofst[zno];
+
+ if (wp_ofst == SD_ZBC_UPDATING_WP_OFST) {
+ /* Write pointer offset update in progress: ask for a requeue */
+ ret = BLK_STS_RESOURCE;
+ goto err;
+ }
+
+ if (wp_ofst == SD_ZBC_INVALID_WP_OFST) {
+ /* Invalid write pointer offset: trigger an update from disk */
+ ret = sd_zbc_update_wp_ofst(sdkp, zno);
+ goto err;
+ }
+
+ wp_ofst = sectors_to_logical(sdkp->device, wp_ofst);
+ if (wp_ofst + nr_blocks > sdkp->zone_blocks) {
+ ret = BLK_STS_IOERR;
+ goto err;
+ }
+
+ /* Set the LBA for the write command used to emulate zone append */
+ *lba += wp_ofst;
+
+ spin_unlock_bh(&sdkp->zone_wp_ofst_lock);
+
+ return BLK_STS_OK;
+
+err:
+ spin_unlock_bh(&sdkp->zone_wp_ofst_lock);
+ blk_req_zone_write_unlock(rq);
+ return ret;
+}
+
/**
* sd_zbc_setup_zone_mgmt_cmnd - Prepare a zone ZBC_OUT command. The operations
* can be RESET WRITE POINTER, OPEN, CLOSE or FINISH.
@@ -266,25 +417,75 @@ blk_status_t sd_zbc_setup_zone_mgmt_cmnd(struct scsi_cmnd *cmd,
cmd->transfersize = 0;
cmd->allowed = 0;
+ /* Only zone reset and zone finish need zone write locking */
+ if (op != ZO_RESET_WRITE_POINTER && op != ZO_FINISH_ZONE)
+ return BLK_STS_OK;
+
+ if (all) {
+ /* We do not write lock all zones for an all zone reset */
+ if (op == ZO_RESET_WRITE_POINTER)
+ return BLK_STS_OK;
+
+ /* Finishing all zones is not supported */
+ return BLK_STS_IOERR;
+ }
+
+ if (!blk_rq_zone_is_seq(rq))
+ return BLK_STS_IOERR;
+
+ if (!blk_req_zone_write_trylock(rq))
+ return BLK_STS_ZONE_RESOURCE;
+
return BLK_STS_OK;
}
+static inline bool sd_zbc_zone_needs_write_unlock(struct request *rq)
+{
+ /*
+ * For zone append, the zone was locked in sd_zbc_prepare_zone_append().
+ * For zone reset and zone finish, the zone was locked in
+ * sd_zbc_setup_zone_mgmt_cmnd().
+ * For regular writes, the zone is unlocked by the block layer elevator.
+ */
+ return req_op(rq) == REQ_OP_ZONE_APPEND ||
+ req_op(rq) == REQ_OP_ZONE_RESET ||
+ req_op(rq) == REQ_OP_ZONE_FINISH;
+}
+
+static bool sd_zbc_need_zone_wp_update(struct request *rq)
+{
+ if (req_op(rq) == REQ_OP_WRITE ||
+ req_op(rq) == REQ_OP_WRITE_ZEROES ||
+ req_op(rq) == REQ_OP_WRITE_SAME)
+ return blk_rq_zone_is_seq(rq);
+
+ if (req_op(rq) == REQ_OP_ZONE_RESET_ALL)
+ return true;
+
+ return sd_zbc_zone_needs_write_unlock(rq);
+}
+
/**
* sd_zbc_complete - ZBC command post processing.
* @cmd: Completed command
* @good_bytes: Command reply bytes
* @sshdr: command sense header
*
- * Called from sd_done(). Process report zones reply and handle reset zone
- * and write commands errors.
+ * Called from sd_done() to handle zone commands errors and updates to the
+ * device queue zone write pointer offset cahce.
*/
-void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
+unsigned int sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
struct scsi_sense_hdr *sshdr)
{
int result = cmd->result;
struct request *rq = cmd->request;
+ struct request_queue *q = rq->q;
+ struct gendisk *disk = rq->rq_disk;
+ struct scsi_disk *sdkp = scsi_disk(disk);
+ enum req_opf op = req_op(rq);
+ unsigned int zno;
- if (op_is_zone_mgmt(req_op(rq)) &&
+ if (op_is_zone_mgmt(op) &&
result &&
sshdr->sense_key == ILLEGAL_REQUEST &&
sshdr->asc == 0x24) {
@@ -294,7 +495,69 @@ void sd_zbc_complete(struct scsi_cmnd *cmd, unsigned int good_bytes,
* so be quiet about the error.
*/
rq->rq_flags |= RQF_QUIET;
+ goto unlock_zone;
+ }
+
+ if (!sd_zbc_need_zone_wp_update(rq))
+ goto unlock_zone;
+
+ /*
+ * If we got an error for a command that needs updating the write
+ * pointer offset cache, we must mark the zone wp offset entry as
+ * invalid to force an update from disk the next time a zone append
+ * command is issued.
+ */
+ zno = blk_rq_zone_no(rq);
+ spin_lock_bh(&sdkp->zone_wp_ofst_lock);
+
+ if (result && op != REQ_OP_ZONE_RESET_ALL) {
+ if (op == REQ_OP_ZONE_APPEND) {
+ /* Force complete completion (no retry) */
+ good_bytes = 0;
+ scsi_set_resid(cmd, blk_rq_bytes(rq));
+ }
+
+ /*
+ * Force an update of the zone write pointer offset on
+ * the next zone append access.
+ */
+ if (q->seq_zones_wp_ofst[zno] != SD_ZBC_UPDATING_WP_OFST)
+ q->seq_zones_wp_ofst[zno] = SD_ZBC_INVALID_WP_OFST;
+ goto unlock_wp_ofst;
}
+
+ switch (op) {
+ case REQ_OP_ZONE_APPEND:
+ rq->__sector += q->seq_zones_wp_ofst[zno];
+ /* fallthrough */
+ case REQ_OP_WRITE_ZEROES:
+ case REQ_OP_WRITE_SAME:
+ case REQ_OP_WRITE:
+ if (q->seq_zones_wp_ofst[zno] < sd_zbc_zone_sectors(sdkp))
+ q->seq_zones_wp_ofst[zno] += good_bytes >> SECTOR_SHIFT;
+ break;
+ case REQ_OP_ZONE_RESET:
+ q->seq_zones_wp_ofst[zno] = 0;
+ break;
+ case REQ_OP_ZONE_FINISH:
+ q->seq_zones_wp_ofst[zno] = sd_zbc_zone_sectors(sdkp);
+ break;
+ case REQ_OP_ZONE_RESET_ALL:
+ memset(q->seq_zones_wp_ofst, 0,
+ sdkp->nr_zones * sizeof(unsigned int));
+ break;
+ default:
+ break;
+ }
+
+unlock_wp_ofst:
+ spin_unlock_bh(&sdkp->zone_wp_ofst_lock);
+
+unlock_zone:
+ if (sd_zbc_zone_needs_write_unlock(rq))
+ blk_req_zone_write_unlock(rq);
+
+ return good_bytes;
}
/**
@@ -399,6 +662,7 @@ static int sd_zbc_check_capacity(struct scsi_disk *sdkp, unsigned char *buf,
int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf)
{
struct gendisk *disk = sdkp->disk;
+ struct request_queue *q = disk->queue;
unsigned int nr_zones;
u32 zone_blocks = 0;
int ret;
@@ -421,9 +685,12 @@ int sd_zbc_read_zones(struct scsi_disk *sdkp, unsigned char *buf)
goto err;
/* The drive satisfies the kernel restrictions: set it up */
- blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, sdkp->disk->queue);
- blk_queue_required_elevator_features(sdkp->disk->queue,
- ELEVATOR_F_ZBD_SEQ_WRITE);
+ blk_queue_flag_set(QUEUE_FLAG_ZONE_RESETALL, q);
+ blk_queue_flag_set(QUEUE_FLAG_ZONE_WP_OFST, q);
+ blk_queue_required_elevator_features(q, ELEVATOR_F_ZBD_SEQ_WRITE);
+ blk_queue_max_zone_append_sectors(q,
+ min_t(u32, logical_to_sectors(sdkp->device, zone_blocks),
+ q->limits.max_segments << (PAGE_SHIFT - SECTOR_SHIFT)));
nr_zones = round_up(sdkp->capacity, zone_blocks) >> ilog2(zone_blocks);
/* READ16/WRITE16 is mandatory for ZBC disks */
@@ -475,3 +742,38 @@ void sd_zbc_print_zones(struct scsi_disk *sdkp)
sdkp->nr_zones,
sdkp->zone_blocks);
}
+
+void sd_zbc_init_disk(struct scsi_disk *sdkp)
+{
+ if (!sd_is_zoned(sdkp))
+ return;
+
+ spin_lock_init(&sdkp->zone_wp_ofst_lock);
+}
+
+int __init sd_zbc_init(void)
+{
+ sd_zbc_zone_work_cache =
+ kmem_cache_create("sd_zbc_zone_work",
+ sizeof(struct sd_zbc_zone_work),
+ 0, 0, NULL);
+ if (!sd_zbc_zone_work_cache)
+ return -ENOMEM;
+
+ sd_zbc_zone_work_pool =
+ mempool_create_slab_pool(SD_ZBC_ZONE_WORK_MEMPOOL_SIZE,
+ sd_zbc_zone_work_cache);
+ if (!sd_zbc_zone_work_pool) {
+ kmem_cache_destroy(sd_zbc_zone_work_cache);
+ printk(KERN_ERR "sd_zbc: create zone work pool failed\n");
+ return -ENOMEM;
+ }
+
+ return 0;
+}
+
+void sd_zbc_exit(void)
+{
+ mempool_destroy(sd_zbc_zone_work_pool);
+ kmem_cache_destroy(sd_zbc_zone_work_cache);
+}
Emulate ZONE_APPEND for SCSI disks using a regular WRITE(16) with a start LBA set to the target zone write pointer position. In order to always know the write pointer position of a sequential write zone, the queue flag QUEUE_FLAG_ZONE_WP_OFST is set to get an initialized write pointer offset array attached to the device request queue. The values of the cache are maintained in sync with the device as follows: 1) the write pointer offset of a zone is reset to 0 when a REQ_OP_ZONE_RESET command completes. 2) the write pointer offset of a zone is set to the zone size when a REQ_OP_ZONE_FINISH command completes. 3) the write pointer offset of a zone is incremented by the number of 512B sectors written when a write or a zone append command completes 4) the write pointer offset of all zones is reset to 0 when a REQ_OP_ZONE_RESET_ALL command completes. Since the block layer does not write lock zones for zone append commands, to ensure a sequential ordering of the write commands used for the emulation, the target zone of a zone append command is locked when the function sd_zbc_prepare_zone_append() is called from sd_setup_read_write_cmnd(). If the zone write lock cannot be obtained (e.g. a zone append is in-flight or a regular write has already locked the zone), the zone append command dispatching is delayed by returning BLK_STS_ZONE_RESOURCE. Since zone reset and finish operations can be issued concurrently with writes and zone append requests, ensure a coherent update of the zone write pointer offsets by also write locking the target zones for these zone management requests. Finally, to avoid the need for write locking all zones for REQ_OP_ZONE_RESET_ALL requests, use a spinlock to protect accesses and modifications of the zone write pointer offsets. This spinlock is initialized from sd_probe() using the new function sd_zbc_init(). Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com> --- drivers/scsi/sd.c | 28 +++- drivers/scsi/sd.h | 36 ++++- drivers/scsi/sd_zbc.c | 316 +++++++++++++++++++++++++++++++++++++++++- 3 files changed, 363 insertions(+), 17 deletions(-)