diff mbox series

[1/2] gpiolib: Pass gpio_desc to gpio_set_config()

Message ID 20200325100357.13705-2-geert+renesas@glider.be (mailing list archive)
State New, archived
Headers show
Series gpiolib: gpio_set_config() cleanups | expand

Commit Message

Geert Uytterhoeven March 25, 2020, 10:03 a.m. UTC
All callers of gpio_set_config() have to convert a gpio_desc to a
gpio_chip and offset.  Avoid these duplicated conversion steps by
letting gpio_set_config() take a gpio_desc pointer directly.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
---
 drivers/gpio/gpiolib.c | 17 +++++++----------
 1 file changed, 7 insertions(+), 10 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index cf7ee9a0ddde6b45..8eeb29de12cb5811 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -3244,9 +3244,9 @@  static int gpio_do_set_config(struct gpio_chip *gc, unsigned int offset,
 	return gc->set_config(gc, offset, config);
 }
 
-static int gpio_set_config(struct gpio_chip *gc, unsigned int offset,
-			   enum pin_config_param mode)
+static int gpio_set_config(struct gpio_desc *desc, enum pin_config_param mode)
 {
+	struct gpio_chip *chip = desc->gdev->chip;
 	unsigned long config;
 	unsigned arg;
 
@@ -3261,7 +3261,7 @@  static int gpio_set_config(struct gpio_chip *gc, unsigned int offset,
 	}
 
 	config = PIN_CONF_PACKED(mode, arg);
-	return gpio_do_set_config(gc, offset, config);
+	return gpio_do_set_config(chip, gpio_chip_hwgpio(desc), config);
 }
 
 static int gpio_set_bias(struct gpio_chip *chip, struct gpio_desc *desc)
@@ -3277,7 +3277,7 @@  static int gpio_set_bias(struct gpio_chip *chip, struct gpio_desc *desc)
 		bias = PIN_CONFIG_BIAS_PULL_DOWN;
 
 	if (bias) {
-		ret = gpio_set_config(chip, gpio_chip_hwgpio(desc), bias);
+		ret = gpio_set_config(desc, bias);
 		if (ret != -ENOTSUPP)
 			return ret;
 	}
@@ -3435,8 +3435,7 @@  int gpiod_direction_output(struct gpio_desc *desc, int value)
 	gc = desc->gdev->chip;
 	if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
 		/* First see if we can enable open drain in hardware */
-		ret = gpio_set_config(gc, gpio_chip_hwgpio(desc),
-				      PIN_CONFIG_DRIVE_OPEN_DRAIN);
+		ret = gpio_set_config(desc, PIN_CONFIG_DRIVE_OPEN_DRAIN);
 		if (!ret)
 			goto set_output_value;
 		/* Emulate open drain by not actively driving the line high */
@@ -3446,8 +3445,7 @@  int gpiod_direction_output(struct gpio_desc *desc, int value)
 		}
 	}
 	else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
-		ret = gpio_set_config(gc, gpio_chip_hwgpio(desc),
-				      PIN_CONFIG_DRIVE_OPEN_SOURCE);
+		ret = gpio_set_config(desc, PIN_CONFIG_DRIVE_OPEN_SOURCE);
 		if (!ret)
 			goto set_output_value;
 		/* Emulate open source by not actively driving the line low */
@@ -3456,8 +3454,7 @@  int gpiod_direction_output(struct gpio_desc *desc, int value)
 			goto set_output_flag;
 		}
 	} else {
-		gpio_set_config(gc, gpio_chip_hwgpio(desc),
-				PIN_CONFIG_DRIVE_PUSH_PULL);
+		gpio_set_config(desc, PIN_CONFIG_DRIVE_PUSH_PULL);
 	}
 
 set_output_value: