[2/2] ASoC: rt1308-sdw: use slot and rx_mask to configure stream
diff mbox series

Message ID 20200325212905.28145-3-pierre-louis.bossart@linux.intel.com
State Accepted
Commit 27a18e9e673f03b48a881e133a532c1619b711c7
Headers show
Series
  • ASoC: rt1308-sdw: configure amplifier with set_tdm_slot()
Related show

Commit Message

Pierre-Louis Bossart March 25, 2020, 9:29 p.m. UTC
If the DAI was configured with a set_tdm_slots() call, use the information.

A platform or machine driver may configure each amplifier to extract
different bitSlots from the frame, or extract the same data and use
processing to generate the relevant output. The latter case is easier
to handle in case of orientation changes.

Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
---
 sound/soc/codecs/rt1308-sdw.c | 15 +++++++++++----
 1 file changed, 11 insertions(+), 4 deletions(-)

Patch
diff mbox series

diff --git a/sound/soc/codecs/rt1308-sdw.c b/sound/soc/codecs/rt1308-sdw.c
index 8763192434c4..a5a7e46de246 100644
--- a/sound/soc/codecs/rt1308-sdw.c
+++ b/sound/soc/codecs/rt1308-sdw.c
@@ -539,7 +539,7 @@  static int rt1308_sdw_hw_params(struct snd_pcm_substream *substream,
 	struct sdw_port_config port_config;
 	enum sdw_data_direction direction;
 	struct sdw_stream_data *stream;
-	int retval, port, num_channels;
+	int retval, port, num_channels, ch_mask;
 
 	dev_dbg(dai->dev, "%s %s", __func__, dai->name);
 	stream = snd_soc_dai_get_dma_data(dai, substream);
@@ -559,13 +559,20 @@  static int rt1308_sdw_hw_params(struct snd_pcm_substream *substream,
 		return -EINVAL;
 	}
 
+	if (rt1308->slots) {
+		num_channels = rt1308->slots;
+		ch_mask = rt1308->rx_mask;
+	} else {
+		num_channels = params_channels(params);
+		ch_mask = (1 << num_channels) - 1;
+	}
+
 	stream_config.frame_rate = params_rate(params);
-	stream_config.ch_count = params_channels(params);
+	stream_config.ch_count = num_channels;
 	stream_config.bps = snd_pcm_format_width(params_format(params));
 	stream_config.direction = direction;
 
-	num_channels = params_channels(params);
-	port_config.ch_mask = (1 << (num_channels)) - 1;
+	port_config.ch_mask = ch_mask;
 	port_config.num = port;
 
 	retval = sdw_stream_add_slave(rt1308->sdw_slave, &stream_config,