| Message ID | 1585302763-23007-1-git-send-email-sreekanth.reddy@broadcom.com (mailing list archive) |
|---|---|
| State | Mainlined |
| Commit | cc41f11a21a51d6869d71e525a7264c748d7c0d7 |
| Headers | show |
| Series | [v2] mpt3sas: Fix kernel panic observed on soft HBA unplug | expand |
Sreekanth, > Generic protection fault type kernel panic is observed when user > performs soft(ordered) HBA unplug operation while IOs are running > on drives connected to HBA. Applied to 5.7/scsi-queue, thanks!
diff --git a/drivers/scsi/mpt3sas/mpt3sas_scsih.c b/drivers/scsi/mpt3sas/mpt3sas_scsih.c index 778d5e6..04a40af 100644 --- a/drivers/scsi/mpt3sas/mpt3sas_scsih.c +++ b/drivers/scsi/mpt3sas/mpt3sas_scsih.c @@ -9908,8 +9908,8 @@ static void scsih_remove(struct pci_dev *pdev) ioc->remove_host = 1; - mpt3sas_wait_for_commands_to_complete(ioc); - _scsih_flush_running_cmds(ioc); + if (!pci_device_is_present(pdev)) + _scsih_flush_running_cmds(ioc); _scsih_fw_event_cleanup_queue(ioc); @@ -9992,8 +9992,8 @@ static void scsih_remove(struct pci_dev *pdev) ioc->remove_host = 1; - mpt3sas_wait_for_commands_to_complete(ioc); - _scsih_flush_running_cmds(ioc); + if (!pci_device_is_present(pdev)) + _scsih_flush_running_cmds(ioc); _scsih_fw_event_cleanup_queue(ioc);
Generic protection fault type kernel panic is observed when user performs soft(ordered) HBA unplug operation while IOs are running on drives connected to HBA. When user performs ordered HBA removal operation then kernel calls PCI device's .remove() call back function where driver is flushing out all the outstanding SCSI IO commands with DID_NO_CONNECT host byte and also un-maps sg buffers allocated for these IO commands. But in the ordered HBA removal case (unlike of real HBA hot unplug) HBA device is still alive and hence HBA hardware is performing the DMA operations to those buffers on the system memory which are already unmapped while flushing out the outstanding SCSI IO commands and this leads to Kernel panic. This bug got introduced from below commit, commit c666d3be99c000bb889a33353e9be0fa5808d3de ("scsi: mpt3sas: wait for and flush running commands on shutdown/unload") Fix: Don't flush out the outstanding IOs from .remove() path in case of ordered HBA removal since HBA will be still alive in this case and it can complete the outstanding IOs. Flush out the outstanding IOs only in case of 'physical HBA hot unplug' where their won't be any communication with the HBA. During shutdown also it is possible that HBA hardware can perform DMA operations on those outstanding IO buffers which are completed with DID_NO_CONNECT by the driver from .shutdown(). So same above fix is applied in shutdown path as well. In Summary it is always safe to drop the outstanding commands when HBA is inaccessible. Such as when permanent PCI failure happens, HBA is in non-operational state and when someone does the real HBA hot unplug operation. Since driver knows that HBA is inaccessible during these cases, so it is always safe to drop the outstanding commands instead of waiting for SCSI error recovery to kicks start and clear these outstanding commands. Cc: stable@vger.kernel.org #v4.14.174+ Signed-off-by: Sreekanth Reddy <sreekanth.reddy@broadcom.com> --- v1: Update the patch description. v2: Update the patch description by adding summary paragraph. drivers/scsi/mpt3sas/mpt3sas_scsih.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)