diff mbox series

[v2,1/3] ASoC: dapm: connect virtual mux with default value

Message ID 01a301d60731$b724ea10$256ebe30$@samsung.com (mailing list archive)
State Accepted
Commit 3bbbb7728fc853d71dbce4073fef9f281fbfb4dd
Headers show
Series [v2,1/3] ASoC: dapm: connect virtual mux with default value | expand

Commit Message

Gyeongtaek Lee March 31, 2020, 7:55 a.m. UTC 
Since a virtual mixer has no backing registers
to decide which path to connect,
it will try to match with initial state.
This is to ensure that the default mixer choice will be
correctly powered up during initialization.
Invert flag is used to select initial state of the virtual switch.
Since actual hardware can't be disconnected by virtual switch,
connected is better choice as initial state in many cases.

Signed-off-by: Gyeongtaek Lee <gt82.lee@samsung.com>
---
 sound/soc/soc-dapm.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c
index 9fb54e6fe254..17962564866d 100644
--- a/sound/soc/soc-dapm.c
+++ b/sound/soc/soc-dapm.c
@@ -802,7 +802,13 @@  static void dapm_set_mixer_path_status(struct snd_soc_dapm_path *p, int i,
 			val = max - val;
 		p->connect = !!val;
 	} else {
-		p->connect = 0;
+		/* since a virtual mixer has no backing registers to
+		 * decide which path to connect, it will try to match
+		 * with initial state.  This is to ensure
+		 * that the default mixer choice will be
+		 * correctly powered up during initialization.
+		 */
+		p->connect = invert;
 	}
 }