diff mbox series

[2/4] drm/amd/display: codestyle cleanup on dc_link file until detect_dp func

Message ID f1dc315e03bc9f8512004b4aa8c174fcb506c4c2.1585651869.git.melissa.srw@gmail.com (mailing list archive)
State New, archived
Headers show
Series drm/amd/display: more code cleanup in the dc_link file | expand

Commit Message

Melissa Wen March 31, 2020, 10:59 a.m. UTC
Removes codestyle issues on the file dc_link until detect_dp func as
suggested by checkpatch.pl.

Types covered:

CHECK: Please don't use multiple blank lines
CHECK: Comparison to NULL could be written
ERROR: space required before the open parenthesis '('
CHECK: Alignment should match open parenthesis
CHECK: Lines should not end with a '('
WARNING: please, no space before tabs
WARNING: Comparisons should place the constant on the right side of the test
WARNING: braces {} are not necessary for single statement blocks
CHECK: Please don't use multiple blank lines

Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
---
 drivers/gpu/drm/amd/display/dc/core/dc_link.c | 109 ++++++++----------
 1 file changed, 49 insertions(+), 60 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link.c b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
index f580b533db5f..0b303d17e543 100644
--- a/drivers/gpu/drm/amd/display/dc/core/dc_link.c
+++ b/drivers/gpu/drm/amd/display/dc/core/dc_link.c
@@ -49,7 +49,6 @@ 
 
 #define DC_LOGGER_INIT(logger)
 
-
 #define LINK_INFO(...) \
 	DC_LOG_HW_HOTPLUG(  \
 		__VA_ARGS__)
@@ -79,7 +78,7 @@  static void dc_link_destruct(struct dc_link *link)
 {
 	int i;
 
-	if (link->hpd_gpio != NULL) {
+	if (link->hpd_gpio) {
 		dal_gpio_destroy_irq(&link->hpd_gpio);
 		link->hpd_gpio = NULL;
 	}
@@ -87,7 +86,7 @@  static void dc_link_destruct(struct dc_link *link)
 	if (link->ddc)
 		dal_ddc_service_destroy(&link->ddc);
 
-	if(link->link_enc)
+	if (link->link_enc)
 		link->link_enc->funcs->destroy(&link->link_enc);
 
 	if (link->local_sink)
@@ -98,8 +97,8 @@  static void dc_link_destruct(struct dc_link *link)
 }
 
 struct gpio *get_hpd_gpio(struct dc_bios *dcb,
-		struct graphics_object_id link_id,
-		struct gpio_service *gpio_service)
+			  struct graphics_object_id link_id,
+			  struct gpio_service *gpio_service)
 {
 	enum bp_result bp_result;
 	struct graphics_object_hpd_info hpd_info;
@@ -116,10 +115,9 @@  struct gpio *get_hpd_gpio(struct dc_bios *dcb,
 		return NULL;
 	}
 
-	return dal_gpio_service_create_irq(
-		gpio_service,
-		pin_info.offset,
-		pin_info.mask);
+	return dal_gpio_service_create_irq(gpio_service,
+					   pin_info.offset,
+					   pin_info.mask);
 }
 
 /*
@@ -134,13 +132,10 @@  struct gpio *get_hpd_gpio(struct dc_bios *dcb,
  *  @return
  *     true on success, false otherwise
  */
-static bool program_hpd_filter(
-	const struct dc_link *link)
+static bool program_hpd_filter(const struct dc_link *link)
 {
 	bool result = false;
-
 	struct gpio *hpd;
-
 	int delay_on_connect_in_ms = 0;
 	int delay_on_disconnect_in_ms = 0;
 
@@ -159,10 +154,10 @@  static bool program_hpd_filter(
 	case SIGNAL_TYPE_DISPLAY_PORT_MST:
 		/* Program hpd filter to allow DP signal to settle */
 		/* 500:	not able to detect MST <-> SST switch as HPD is low for
-		 * 	only 100ms on DELL U2413
-		 * 0:	some passive dongle still show aux mode instead of i2c
-		 * 20-50:not enough to hide bouncing HPD with passive dongle.
-		 * 	also see intermittent i2c read issues.
+		 * only 100ms on DELL U2413
+		 * 0: some passive dongle still show aux mode instead of i2c
+		 * 20-50: not enough to hide bouncing HPD with passive dongle.
+		 * also see intermittent i2c read issues.
 		 */
 		delay_on_connect_in_ms = 80;
 		delay_on_disconnect_in_ms = 0;
@@ -175,7 +170,8 @@  static bool program_hpd_filter(
 	}
 
 	/* Obtain HPD handle */
-	hpd = get_hpd_gpio(link->ctx->dc_bios, link->link_id, link->ctx->gpio_service);
+	hpd = get_hpd_gpio(link->ctx->dc_bios, link->link_id,
+			   link->ctx->gpio_service);
 
 	if (!hpd)
 		return result;
@@ -226,8 +222,9 @@  bool dc_link_detect_sink(struct dc_link *link, enum dc_connection_type *type)
 	}
 
 	/* todo: may need to lock gpio access */
-	hpd_pin = get_hpd_gpio(link->ctx->dc_bios, link->link_id, link->ctx->gpio_service);
-	if (hpd_pin == NULL)
+	hpd_pin = get_hpd_gpio(link->ctx->dc_bios, link->link_id,
+			       link->ctx->gpio_service);
+	if (!hpd_pin)
 		goto hpd_gpio_failure;
 
 	dal_gpio_open(hpd_pin, GPIO_MODE_INTERRUPT);
@@ -248,8 +245,7 @@  bool dc_link_detect_sink(struct dc_link *link, enum dc_connection_type *type)
 	return false;
 }
 
-static enum ddc_transaction_type get_ddc_transaction_type(
-		enum signal_type sink_signal)
+static enum ddc_transaction_type get_ddc_transaction_type(enum signal_type sink_signal)
 {
 	enum ddc_transaction_type transaction_type = DDC_TRANSACTION_TYPE_NONE;
 
@@ -282,9 +278,8 @@  static enum ddc_transaction_type get_ddc_transaction_type(
 	return transaction_type;
 }
 
-static enum signal_type get_basic_signal_type(
-	struct graphics_object_id encoder,
-	struct graphics_object_id downstream)
+static enum signal_type get_basic_signal_type(struct graphics_object_id encoder,
+					      struct graphics_object_id downstream)
 {
 	if (downstream.type == OBJECT_TYPE_CONNECTOR) {
 		switch (downstream.id) {
@@ -373,8 +368,8 @@  bool dc_link_is_dp_sink_present(struct dc_link *link)
 	 * which indicates we need additional delay
 	 */
 
-	if (GPIO_RESULT_OK != dal_ddc_open(
-		ddc, GPIO_MODE_INPUT, GPIO_DDC_CONFIG_TYPE_MODE_I2C)) {
+	if (dal_ddc_open(ddc, GPIO_MODE_INPUT,
+			 GPIO_DDC_CONFIG_TYPE_MODE_I2C) != GPIO_RESULT_OK) {
 		dal_ddc_close(ddc);
 
 		return present;
@@ -408,12 +403,11 @@  bool dc_link_is_dp_sink_present(struct dc_link *link)
  * @brief
  * Detect output sink type
  */
-static enum signal_type link_detect_sink(
-	struct dc_link *link,
-	enum dc_detect_reason reason)
+static enum signal_type link_detect_sink(struct dc_link *link,
+					 enum dc_detect_reason reason)
 {
-	enum signal_type result = get_basic_signal_type(
-		link->link_enc->id, link->link_id);
+	enum signal_type result = get_basic_signal_type(link->link_enc->id,
+							link->link_id);
 
 	/* Internal digital encoder will detect only dongles
 	 * that require digital signal
@@ -428,17 +422,16 @@  static enum signal_type link_detect_sink(
 	 */
 
 	/* PCIE detects the actual connector on add-on board */
-
-	if (link->link_id.id == CONNECTOR_ID_PCIE) {
+	if (link->link_id.id == CONNECTOR_ID_PCIE)
 		/* ZAZTODO implement PCIE add-on card detection */
-	}
 
 	switch (link->link_id.id) {
 	case CONNECTOR_ID_HDMI_TYPE_A: {
 		/* check audio support:
 		 * if native HDMI is not supported, switch to DVI
 		 */
-		struct audio_support *aud_support = &link->dc->res_pool->audio_support;
+		struct audio_support *aud_support =
+					&link->dc->res_pool->audio_support;
 
 		if (!aud_support->hdmi_audio_native)
 			if (link->link_id.id == CONNECTOR_ID_HDMI_TYPE_A)
@@ -466,16 +459,15 @@  static enum signal_type link_detect_sink(
 	return result;
 }
 
-static enum signal_type decide_signal_from_strap_and_dongle_type(
-		enum display_dongle_type dongle_type,
-		struct audio_support *audio_support)
+static enum signal_type decide_signal_from_strap_and_dongle_type(enum display_dongle_type dongle_type,
+								 struct audio_support *audio_support)
 {
 	enum signal_type signal = SIGNAL_TYPE_NONE;
 
 	switch (dongle_type) {
 	case DISPLAY_DONGLE_DP_HDMI_DONGLE:
 		if (audio_support->hdmi_audio_on_dongle)
-			signal =  SIGNAL_TYPE_HDMI_TYPE_A;
+			signal = SIGNAL_TYPE_HDMI_TYPE_A;
 		else
 			signal = SIGNAL_TYPE_DVI_SINGLE_LINK;
 		break;
@@ -496,16 +488,14 @@  static enum signal_type decide_signal_from_strap_and_dongle_type(
 	return signal;
 }
 
-static enum signal_type dp_passive_dongle_detection(
-		struct ddc_service *ddc,
-		struct display_sink_capability *sink_cap,
-		struct audio_support *audio_support)
+static enum signal_type dp_passive_dongle_detection(struct ddc_service *ddc,
+						    struct display_sink_capability *sink_cap,
+						    struct audio_support *audio_support)
 {
-	dal_ddc_service_i2c_query_dp_dual_mode_adaptor(
-						ddc, sink_cap);
-	return decide_signal_from_strap_and_dongle_type(
-			sink_cap->dongle_type,
-			audio_support);
+	dal_ddc_service_i2c_query_dp_dual_mode_adaptor(ddc, sink_cap);
+
+	return decide_signal_from_strap_and_dongle_type(sink_cap->dongle_type,
+							audio_support);
 }
 
 static void link_disconnect_sink(struct dc_link *link)
@@ -524,7 +514,6 @@  static void link_disconnect_remap(struct dc_sink *prev_sink, struct dc_link *lin
 	link->local_sink = prev_sink;
 }
 
-
 static void read_current_link_settings_on_detect(struct dc_link *link)
 {
 	union lane_count_set lane_count_set = { {0} };
@@ -537,18 +526,18 @@  static void read_current_link_settings_on_detect(struct dc_link *link)
 
 	// Read DPCD 00101h to find out the number of lanes currently set
 	for (i = 0; i < read_dpcd_retry_cnt; i++) {
-		status = core_link_read_dpcd(
-				link,
-				DP_LANE_COUNT_SET,
-				&lane_count_set.raw,
-				sizeof(lane_count_set));
+		status = core_link_read_dpcd(link,
+					     DP_LANE_COUNT_SET,
+					     &lane_count_set.raw,
+					     sizeof(lane_count_set));
 		/* First DPCD read after VDD ON can fail if the particular board
 		 * does not have HPD pin wired correctly. So if DPCD read fails,
 		 * which it should never happen, retry a few times. Target worst
 		 * case scenario of 80 ms.
 		 */
 		if (status == DC_OK) {
-			link->cur_link_settings.lane_count = lane_count_set.bits.LANE_COUNT_SET;
+			link->cur_link_settings.lane_count =
+					lane_count_set.bits.LANE_COUNT_SET;
 			break;
 		}
 
@@ -557,7 +546,7 @@  static void read_current_link_settings_on_detect(struct dc_link *link)
 
 	// Read DPCD 00100h to find if standard link rates are set
 	core_link_read_dpcd(link, DP_LINK_BW_SET,
-			&link_bw_set, sizeof(link_bw_set));
+			    &link_bw_set, sizeof(link_bw_set));
 
 	if (link_bw_set == 0) {
 		if (link->connector_signal == SIGNAL_TYPE_EDP) {
@@ -565,12 +554,12 @@  static void read_current_link_settings_on_detect(struct dc_link *link)
 			 * Read DPCD 00115h to find the edp link rate set used
 			 */
 			core_link_read_dpcd(link, DP_LINK_RATE_SET,
-					&link_rate_set, sizeof(link_rate_set));
+					    &link_rate_set, sizeof(link_rate_set));
 
 			// edp_supported_link_rates_count = 0 for DP
 			if (link_rate_set < link->dpcd_caps.edp_supported_link_rates_count) {
 				link->cur_link_settings.link_rate =
-						link->dpcd_caps.edp_supported_link_rates[link_rate_set];
+					link->dpcd_caps.edp_supported_link_rates[link_rate_set];
 				link->cur_link_settings.link_rate_set = link_rate_set;
 				link->cur_link_settings.use_link_rate_set = true;
 			}
@@ -584,7 +573,7 @@  static void read_current_link_settings_on_detect(struct dc_link *link)
 	}
 	// Read DPCD 00003h to find the max down spread.
 	core_link_read_dpcd(link, DP_MAX_DOWNSPREAD,
-			&max_down_spread.raw, sizeof(max_down_spread));
+			    &max_down_spread.raw, sizeof(max_down_spread));
 	link->cur_link_settings.link_spread =
 		max_down_spread.bits.MAX_DOWN_SPREAD ?
 		LINK_SPREAD_05_DOWNSPREAD_30KHZ : LINK_SPREAD_DISABLED;