diff mbox series

[V3,5/8] spi: spi-geni-qcom: Add interconnect support

Message ID 1585652976-17481-6-git-send-email-akashast@codeaurora.org (mailing list archive)
State Superseded
Headers show
Series Add interconnect support to QSPI and QUP drivers | expand

Commit Message

Akash Asthana March 31, 2020, 11:09 a.m. UTC 
Get the interconnect paths for SPI based Serial Engine device
and vote according to the current bus speed of the driver.

Signed-off-by: Akash Asthana <akashast@codeaurora.org>
---
Changes in V2:
 - As per Bjorn's comment, removed se == NULL check from geni_spi_icc_get
 - As per Bjorn's comment, removed code to set se->icc_path* to NULL in failure
 - As per Bjorn's comment, introduced and using devm_of_icc_get API for getting
   path handle
 - As per Matthias comment, added error handling for icc_set_bw call

Changes in V3:
 - As per Matthias's comment, use helper ICC function from geni-se driver.

 drivers/spi/spi-geni-qcom.c | 31 ++++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

Comments

Matthias Kaehlcke March 31, 2020, 7:02 p.m. UTC | #1 
On Tue, Mar 31, 2020 at 04:39:33PM +0530, Akash Asthana wrote:
> Get the interconnect paths for SPI based Serial Engine device
> and vote according to the current bus speed of the driver.
> 
> Signed-off-by: Akash Asthana <akashast@codeaurora.org>
> ---
> Changes in V2:
>  - As per Bjorn's comment, removed se == NULL check from geni_spi_icc_get
>  - As per Bjorn's comment, removed code to set se->icc_path* to NULL in failure
>  - As per Bjorn's comment, introduced and using devm_of_icc_get API for getting
>    path handle
>  - As per Matthias comment, added error handling for icc_set_bw call
> 
> Changes in V3:
>  - As per Matthias's comment, use helper ICC function from geni-se driver.
> 
>  drivers/spi/spi-geni-qcom.c | 31 ++++++++++++++++++++++++++++++-
>  1 file changed, 30 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
> index c397242..f1dae2d 100644
> --- a/drivers/spi/spi-geni-qcom.c
> +++ b/drivers/spi/spi-geni-qcom.c
> @@ -234,6 +234,16 @@ static int setup_fifo_params(struct spi_device *spi_slv,
>  		return ret;
>  	}
>  
> +	/*
> +	 * Set BW quota for CPU as driver supports FIFO mode only.
> +	 * Assume peak bw as twice of avg bw.
> +	 */
> +	se->from_cpu.avg_bw = Bps_to_icc(mas->cur_speed_hz);
> +	se->from_cpu.peak_bw = Bps_to_icc(2 * mas->cur_speed_hz);
> +	ret = geni_icc_vote_on(se);
> +	if (ret)
> +		return ret;
> +
>  	clk_sel = idx & CLK_SEL_MSK;
>  	m_clk_cfg = (div << CLK_DIV_SHFT) | SER_CLK_EN;
>  	spi_setup_word_len(mas, spi_slv->mode, spi_slv->bits_per_word);
> @@ -578,6 +588,15 @@ static int spi_geni_probe(struct platform_device *pdev)
>  	spin_lock_init(&mas->lock);
>  	pm_runtime_enable(dev);
>  
> +	ret = geni_icc_get(&mas->se, "qup-core", "qup-config", NULL);
> +	if (ret)
> +		goto spi_geni_probe_runtime_disable;

This fails without providing any hints why, besides the error code.
It might be worth to add error logging to geni_icc_get().

> +	/* Set the bus quota to a reasonable value for register access */
> +	mas->se.to_core.avg_bw = Bps_to_icc(CORE_2X_50_MHZ);
> +	mas->se.to_core.peak_bw = Bps_to_icc(CORE_2X_100_MHZ);
> +	mas->se.from_cpu.avg_bw = GENI_DEFAULT_BW;
> +	mas->se.from_cpu.peak_bw = GENI_DEFAULT_BW;
> +
>  	ret = spi_geni_init(mas);
>  	if (ret)
>  		goto spi_geni_probe_runtime_disable;
> @@ -616,14 +635,24 @@ static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
>  {
>  	struct spi_master *spi = dev_get_drvdata(dev);
>  	struct spi_geni_master *mas = spi_master_get_devdata(spi);
> +	int ret;
> +
> +	ret = geni_se_resources_off(&mas->se);
> +	if (ret)
> +		return ret;
>  
> -	return geni_se_resources_off(&mas->se);
> +	return geni_icc_vote_off(&mas->se);
>  }
>  
>  static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
>  {
>  	struct spi_master *spi = dev_get_drvdata(dev);
>  	struct spi_geni_master *mas = spi_master_get_devdata(spi);
> +	int ret;
> +
> +	ret = geni_icc_vote_on(&mas->se);
> +	if (ret)
> +		return ret;
>  
>  	return geni_se_resources_on(&mas->se);
>  }

Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Akash Asthana April 7, 2020, 7:11 a.m. UTC | #2 
Hi Matthias,

>>   
>> +	ret = geni_icc_get(&mas->se, "qup-core", "qup-config", NULL);
>> +	if (ret)
>> +		goto spi_geni_probe_runtime_disable;
> This fails without providing any hints why, besides the error code.
> It might be worth to add error logging to geni_icc_get().
>
As per Bjorn's comment, I will add error logs inside geni_icc_get API 
incase it returns something other than -EPROBE_DEFER . 
https://patchwork.kernel.org/patch/11467511/

regards,

Akash
diff mbox series

Patch

diff --git a/drivers/spi/spi-geni-qcom.c b/drivers/spi/spi-geni-qcom.c
index c397242..f1dae2d 100644
--- a/drivers/spi/spi-geni-qcom.c
+++ b/drivers/spi/spi-geni-qcom.c
@@ -234,6 +234,16 @@  static int setup_fifo_params(struct spi_device *spi_slv,
 		return ret;
 	}
 
+	/*
+	 * Set BW quota for CPU as driver supports FIFO mode only.
+	 * Assume peak bw as twice of avg bw.
+	 */
+	se->from_cpu.avg_bw = Bps_to_icc(mas->cur_speed_hz);
+	se->from_cpu.peak_bw = Bps_to_icc(2 * mas->cur_speed_hz);
+	ret = geni_icc_vote_on(se);
+	if (ret)
+		return ret;
+
 	clk_sel = idx & CLK_SEL_MSK;
 	m_clk_cfg = (div << CLK_DIV_SHFT) | SER_CLK_EN;
 	spi_setup_word_len(mas, spi_slv->mode, spi_slv->bits_per_word);
@@ -578,6 +588,15 @@  static int spi_geni_probe(struct platform_device *pdev)
 	spin_lock_init(&mas->lock);
 	pm_runtime_enable(dev);
 
+	ret = geni_icc_get(&mas->se, "qup-core", "qup-config", NULL);
+	if (ret)
+		goto spi_geni_probe_runtime_disable;
+	/* Set the bus quota to a reasonable value for register access */
+	mas->se.to_core.avg_bw = Bps_to_icc(CORE_2X_50_MHZ);
+	mas->se.to_core.peak_bw = Bps_to_icc(CORE_2X_100_MHZ);
+	mas->se.from_cpu.avg_bw = GENI_DEFAULT_BW;
+	mas->se.from_cpu.peak_bw = GENI_DEFAULT_BW;
+
 	ret = spi_geni_init(mas);
 	if (ret)
 		goto spi_geni_probe_runtime_disable;
@@ -616,14 +635,24 @@  static int __maybe_unused spi_geni_runtime_suspend(struct device *dev)
 {
 	struct spi_master *spi = dev_get_drvdata(dev);
 	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+	int ret;
+
+	ret = geni_se_resources_off(&mas->se);
+	if (ret)
+		return ret;
 
-	return geni_se_resources_off(&mas->se);
+	return geni_icc_vote_off(&mas->se);
 }
 
 static int __maybe_unused spi_geni_runtime_resume(struct device *dev)
 {
 	struct spi_master *spi = dev_get_drvdata(dev);
 	struct spi_geni_master *mas = spi_master_get_devdata(spi);
+	int ret;
+
+	ret = geni_icc_vote_on(&mas->se);
+	if (ret)
+		return ret;
 
 	return geni_se_resources_on(&mas->se);
 }