diff mbox series

[v4,1/3] dt-bindings: thermal: Add yaml bindings for thermal sensors

Message ID 146b5dfebf23321c1eed8190ada957e2264ffe65.1585738725.git.amit.kucheria@linaro.org (mailing list archive)
State Superseded
Headers show
Series Convert thermal bindings to yaml | expand

Commit Message

Amit Kucheria April 1, 2020, 11:15 a.m. UTC
As part of moving the thermal bindings to YAML, split it up into 3
bindings: thermal sensors, cooling devices and thermal zones.

The property #thermal-sensor-cells is required in each device that acts
as a thermal sensor. It is used to uniquely identify the instance of the
thermal sensor inside the system.

Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../bindings/thermal/thermal-sensor.yaml      | 72 +++++++++++++++++++
 1 file changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/thermal/thermal-sensor.yaml

Comments

Lukasz Luba April 1, 2020, 12:40 p.m. UTC | #1
On 4/1/20 12:15 PM, Amit Kucheria wrote:
> As part of moving the thermal bindings to YAML, split it up into 3
> bindings: thermal sensors, cooling devices and thermal zones.
> 
> The property #thermal-sensor-cells is required in each device that acts
> as a thermal sensor. It is used to uniquely identify the instance of the
> thermal sensor inside the system.
> 
> Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> Reviewed-by: Rob Herring <robh@kernel.org>
> ---
>   .../bindings/thermal/thermal-sensor.yaml      | 72 +++++++++++++++++++
>   1 file changed, 72 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
> 
> diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
> new file mode 100644
> index 0000000000000..920ee7667591d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
> @@ -0,0 +1,72 @@
> +# SPDX-License-Identifier: (GPL-2.0)
> +# Copyright 2020 Linaro Ltd.
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/thermal/thermal-sensor.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Thermal sensor binding
> +
> +maintainers:
> +  - Amit Kucheria <amitk@kernel.org>
> +
> +description: |
> +  Thermal management is achieved in devicetree by describing the sensor hardware
> +  and the software abstraction of thermal zones required to take appropriate
> +  action to mitigate thermal overloads.
> +
> +  The following node types are used to completely describe a thermal management
> +  system in devicetree:
> +   - thermal-sensor: device that measures temperature, has SoC-specific bindings
> +   - cooling-device: device used to dissipate heat either passively or artively

s/artively/actively

> +   - thermal-zones: a container of the following node types used to describe all
> +     thermal data for the platform
> +
> +  This binding describes the thermal-sensor.
> +
> +  Thermal sensor devices provide temperature sensing capabilities on thermal
> +  zones. Typical devices are I2C ADC converters and bandgaps. Thermal sensor
> +  devices may control one or more internal sensors.
> +
> +properties:
> +  "#thermal-sensor-cells":
> +    description:
> +      Used to uniquely identify a thermal sensor instance within an IC. Will be
> +      0 on sensor nodes with only a single sensor and at least 1 on nodes
> +      containing several internal sensors.
> +    enum: [0, 1]
> +
> +examples:
> +  - |
> +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> +    // Example 1: SDM845 TSENS
> +    soc: soc@0 {
> +            #address-cells = <2>;
> +            #size-cells = <2>;
> +
> +            /* ... */
> +
> +            tsens0: thermal-sensor@c263000 {
> +                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> +                    reg = <0 0x0c263000 0 0x1ff>, /* TM */
> +                          <0 0x0c222000 0 0x1ff>; /* SROT */
> +                    #qcom,sensors = <13>;
> +                    interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> +                                 <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> +                    interrupt-names = "uplow", "critical";
> +                    #thermal-sensor-cells = <1>;
> +            };
> +
> +            tsens1: thermal-sensor@c265000 {
> +                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> +                    reg = <0 0x0c265000 0 0x1ff>, /* TM */
> +                          <0 0x0c223000 0 0x1ff>; /* SROT */
> +                    #qcom,sensors = <8>;
> +                    interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> +                                 <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
> +                    interrupt-names = "uplow", "critical";
> +                    #thermal-sensor-cells = <1>;
> +            };
> +    };
> +...
> 

Apart from the above, looks good.

Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>

Regards,
Lukasz
Amit Kucheria April 1, 2020, 1:38 p.m. UTC | #2
On Wed, Apr 1, 2020 at 6:10 PM Lukasz Luba <lukasz.luba@arm.com> wrote:
>
>
>
> On 4/1/20 12:15 PM, Amit Kucheria wrote:
> > As part of moving the thermal bindings to YAML, split it up into 3
> > bindings: thermal sensors, cooling devices and thermal zones.
> >
> > The property #thermal-sensor-cells is required in each device that acts
> > as a thermal sensor. It is used to uniquely identify the instance of the
> > thermal sensor inside the system.
> >
> > Signed-off-by: Amit Kucheria <amit.kucheria@linaro.org>
> > Reviewed-by: Rob Herring <robh@kernel.org>
> > ---
> >   .../bindings/thermal/thermal-sensor.yaml      | 72 +++++++++++++++++++
> >   1 file changed, 72 insertions(+)
> >   create mode 100644 Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
> >
> > diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
> > new file mode 100644
> > index 0000000000000..920ee7667591d
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
> > @@ -0,0 +1,72 @@
> > +# SPDX-License-Identifier: (GPL-2.0)
> > +# Copyright 2020 Linaro Ltd.
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/thermal/thermal-sensor.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Thermal sensor binding
> > +
> > +maintainers:
> > +  - Amit Kucheria <amitk@kernel.org>
> > +
> > +description: |
> > +  Thermal management is achieved in devicetree by describing the sensor hardware
> > +  and the software abstraction of thermal zones required to take appropriate
> > +  action to mitigate thermal overloads.
> > +
> > +  The following node types are used to completely describe a thermal management
> > +  system in devicetree:
> > +   - thermal-sensor: device that measures temperature, has SoC-specific bindings
> > +   - cooling-device: device used to dissipate heat either passively or artively
>
> s/artively/actively
>
> > +   - thermal-zones: a container of the following node types used to describe all
> > +     thermal data for the platform
> > +
> > +  This binding describes the thermal-sensor.
> > +
> > +  Thermal sensor devices provide temperature sensing capabilities on thermal
> > +  zones. Typical devices are I2C ADC converters and bandgaps. Thermal sensor
> > +  devices may control one or more internal sensors.
> > +
> > +properties:
> > +  "#thermal-sensor-cells":
> > +    description:
> > +      Used to uniquely identify a thermal sensor instance within an IC. Will be
> > +      0 on sensor nodes with only a single sensor and at least 1 on nodes
> > +      containing several internal sensors.
> > +    enum: [0, 1]
> > +
> > +examples:
> > +  - |
> > +    #include <dt-bindings/interrupt-controller/arm-gic.h>
> > +
> > +    // Example 1: SDM845 TSENS
> > +    soc: soc@0 {
> > +            #address-cells = <2>;
> > +            #size-cells = <2>;
> > +
> > +            /* ... */
> > +
> > +            tsens0: thermal-sensor@c263000 {
> > +                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> > +                    reg = <0 0x0c263000 0 0x1ff>, /* TM */
> > +                          <0 0x0c222000 0 0x1ff>; /* SROT */
> > +                    #qcom,sensors = <13>;
> > +                    interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
> > +                                 <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
> > +                    interrupt-names = "uplow", "critical";
> > +                    #thermal-sensor-cells = <1>;
> > +            };
> > +
> > +            tsens1: thermal-sensor@c265000 {
> > +                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
> > +                    reg = <0 0x0c265000 0 0x1ff>, /* TM */
> > +                          <0 0x0c223000 0 0x1ff>; /* SROT */
> > +                    #qcom,sensors = <8>;
> > +                    interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
> > +                                 <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
> > +                    interrupt-names = "uplow", "critical";
> > +                    #thermal-sensor-cells = <1>;
> > +            };
> > +    };
> > +...
> >
>
> Apart from the above, looks good.
>
> Reviewed-by: Lukasz Luba <lukasz.luba@arm.com>

Thanks for the review. Will spin a v5 with those trivial fixes.
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
new file mode 100644
index 0000000000000..920ee7667591d
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
@@ -0,0 +1,72 @@ 
+# SPDX-License-Identifier: (GPL-2.0)
+# Copyright 2020 Linaro Ltd.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/thermal-sensor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thermal sensor binding
+
+maintainers:
+  - Amit Kucheria <amitk@kernel.org>
+
+description: |
+  Thermal management is achieved in devicetree by describing the sensor hardware
+  and the software abstraction of thermal zones required to take appropriate
+  action to mitigate thermal overloads.
+
+  The following node types are used to completely describe a thermal management
+  system in devicetree:
+   - thermal-sensor: device that measures temperature, has SoC-specific bindings
+   - cooling-device: device used to dissipate heat either passively or artively
+   - thermal-zones: a container of the following node types used to describe all
+     thermal data for the platform
+
+  This binding describes the thermal-sensor.
+
+  Thermal sensor devices provide temperature sensing capabilities on thermal
+  zones. Typical devices are I2C ADC converters and bandgaps. Thermal sensor
+  devices may control one or more internal sensors.
+
+properties:
+  "#thermal-sensor-cells":
+    description:
+      Used to uniquely identify a thermal sensor instance within an IC. Will be
+      0 on sensor nodes with only a single sensor and at least 1 on nodes
+      containing several internal sensors.
+    enum: [0, 1]
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    // Example 1: SDM845 TSENS
+    soc: soc@0 {
+            #address-cells = <2>;
+            #size-cells = <2>;
+
+            /* ... */
+
+            tsens0: thermal-sensor@c263000 {
+                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+                    reg = <0 0x0c263000 0 0x1ff>, /* TM */
+                          <0 0x0c222000 0 0x1ff>; /* SROT */
+                    #qcom,sensors = <13>;
+                    interrupts = <GIC_SPI 506 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 508 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "uplow", "critical";
+                    #thermal-sensor-cells = <1>;
+            };
+
+            tsens1: thermal-sensor@c265000 {
+                    compatible = "qcom,sdm845-tsens", "qcom,tsens-v2";
+                    reg = <0 0x0c265000 0 0x1ff>, /* TM */
+                          <0 0x0c223000 0 0x1ff>; /* SROT */
+                    #qcom,sensors = <8>;
+                    interrupts = <GIC_SPI 507 IRQ_TYPE_LEVEL_HIGH>,
+                                 <GIC_SPI 509 IRQ_TYPE_LEVEL_HIGH>;
+                    interrupt-names = "uplow", "critical";
+                    #thermal-sensor-cells = <1>;
+            };
+    };
+...