diff mbox series

[v6,04/10] PM / EM: add support for other devices than CPUs in Energy Model

Message ID 20200410084210.24932-5-lukasz.luba@arm.com (mailing list archive)
State New, archived
Headers show
Series Add support for devices in the Energy Model | expand

Commit Message

Lukasz Luba April 10, 2020, 8:42 a.m. UTC
Add support for other devices that CPUs. The registration function
does not require a valid cpumask pointer and is ready to handle new
devices. Some of the internal structures has been reorganized in order to
keep consistent view (like removing per_cpu pd pointers). To track usage
of the Energy Model structures, they are protected with kref.

Signed-off-by: Lukasz Luba <lukasz.luba@arm.com>
---
 include/linux/energy_model.h |  32 ++-
 kernel/power/energy_model.c  | 433 +++++++++++++++++++++++++++++------
 2 files changed, 389 insertions(+), 76 deletions(-)

Comments

Luis Gerhorst April 10, 2020, 11:12 a.m. UTC | #1
Lukasz Luba writes:

> +/**
> + * em_dev_unregister_perf_domain() - Unregister Energy Model 
> (EM) for a device
> + * @dev		: Device for which the EM is registered
> + *
> + * Try to unregister the EM for the specified device (it checks 
> current
> + * reference counter). The EM for CPUs will not be freed.
> + */
> +void em_dev_unregister_perf_domain(struct device *dev)
> +{
> +	struct em_device *em_dev, *tmp;
> +
> +	if (IS_ERR_OR_NULL(dev))
> +		return;
> +
> +	/* We don't support freeing CPU structures in hotplug */
> +	if (_is_cpu_device(dev)) {
> +		dev_dbg_once(dev, "EM: the structures are not going to be 
> removed\n");
> +		return;
> +	}
> +
> +	mutex_lock(&em_pd_mutex);
> +
> +	if (list_empty(&em_pd_dev_list)) {
> +		mutex_unlock(&em_pd_mutex);
> +		return;
> +	}
> +
> +	list_for_each_entry_safe(em_dev, tmp, &em_pd_dev_list, 
> em_dev_list) {
> +		if (em_dev->dev == dev) {
> +			kref_put(&em_dev->kref, _em_release);
> +			break;
> +		}
> +	}
> +
> +	mutex_unlock(&em_pd_mutex);
> +}
> +EXPORT_SYMBOL_GPL(em_dev_unregister_perf_domain);

Ok, so em_dev_unregister_perf_domain() does not support the CPU 
device
and a subsequent em_register_perf_domain() will fail with EEXIST.

Is there a way to unregister/change the CPU's energy model during
runtime without restarting the whole system?
Lukasz Luba April 10, 2020, 11:34 a.m. UTC | #2
On 4/10/20 12:12 PM, Luis Gerhorst wrote:
> 
> Lukasz Luba writes:
> 
>> +/**
>> + * em_dev_unregister_perf_domain() - Unregister Energy Model (EM) for 
>> a device
>> + * @dev        : Device for which the EM is registered
>> + *
>> + * Try to unregister the EM for the specified device (it checks current
>> + * reference counter). The EM for CPUs will not be freed.
>> + */
>> +void em_dev_unregister_perf_domain(struct device *dev)
>> +{
>> +    struct em_device *em_dev, *tmp;
>> +
>> +    if (IS_ERR_OR_NULL(dev))
>> +        return;
>> +
>> +    /* We don't support freeing CPU structures in hotplug */
>> +    if (_is_cpu_device(dev)) {
>> +        dev_dbg_once(dev, "EM: the structures are not going to be 
>> removed\n");
>> +        return;
>> +    }
>> +
>> +    mutex_lock(&em_pd_mutex);
>> +
>> +    if (list_empty(&em_pd_dev_list)) {
>> +        mutex_unlock(&em_pd_mutex);
>> +        return;
>> +    }
>> +
>> +    list_for_each_entry_safe(em_dev, tmp, &em_pd_dev_list, 
>> em_dev_list) {
>> +        if (em_dev->dev == dev) {
>> +            kref_put(&em_dev->kref, _em_release);
>> +            break;
>> +        }
>> +    }
>> +
>> +    mutex_unlock(&em_pd_mutex);
>> +}
>> +EXPORT_SYMBOL_GPL(em_dev_unregister_perf_domain);
> 
> Ok, so em_dev_unregister_perf_domain() does not support the CPU device
> and a subsequent em_register_perf_domain() will fail with EEXIST.

Correct. At the current mainline Energy Model we don't even have
em_unregister_perf_domain function. I had to introduce it in order
to support other devices which might have drivers loaded/unloaded
as modules.


> 
> Is there a way to unregister/change the CPU's energy model during
> runtime without restarting the whole system?

Not for the CPU for now.

It is possible for other devices. When you have i.e. a module driver for
a device and in your code there is a (*active_power)(), then it is
possible to change EM by unloading/loading the module.

For the CPU we don't have this requirement for production code. I will
add you to CC list when something like this would pop-up for a
prototyping/experimentation code. We have been analyzing some options.

Regards,
Lukasz
kernel test robot April 10, 2020, 2:35 p.m. UTC | #3
Hi Lukasz,

I love your patch! Perhaps something to improve:

[auto build test WARNING on next-20200409]
[cannot apply to pm/linux-next tip/sched/core linus/master linux/master v5.6 v5.6-rc7 v5.6-rc6 v5.6]
[if your patch is applied to the wrong git tree, please drop us a note to help
improve the system. BTW, we also suggest to use '--base' option to specify the
base tree in git format-patch, please see https://stackoverflow.com/a/37406982]

url:    https://github.com/0day-ci/linux/commits/Lukasz-Luba/Add-support-for-devices-in-the-Energy-Model/20200410-172456
base:    873e37a44b1ee8ad4628ca257dc51c0c7c654326

If you fix the issue, kindly add following tag as appropriate
Reported-by: kbuild test robot <lkp@intel.com>


cppcheck warnings: (new ones prefixed by >>)

>> kernel/power/energy_model.c:394:15: warning: Variable 'ret' is assigned a value that is never used. [unreadVariable]
    int cpu, ret = 0;
                 ^

vim +/ret +394 kernel/power/energy_model.c

27871f7a8a341e Quentin Perret  2018-12-03  370  
27871f7a8a341e Quentin Perret  2018-12-03  371  /**
b4dc5cca354b8a Lukasz Luba     2020-04-10  372   * em_dev_register_perf_domain() - Register the Energy Model (EM) for a device
b4dc5cca354b8a Lukasz Luba     2020-04-10  373   * @dev		: Device for which the EM is to register
1ccc27ced21bf5 Lukasz Luba     2020-04-10  374   * @nr_states	: Number of performance states to register
27871f7a8a341e Quentin Perret  2018-12-03  375   * @cb		: Callback functions providing the data of the Energy Model
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  376   * @cpus	: Pointer to cpumask_t, which in case of a CPU device is
b4dc5cca354b8a Lukasz Luba     2020-04-10  377   *		obligatory. It can be taken from i.e. 'policy->cpus'. For other
b4dc5cca354b8a Lukasz Luba     2020-04-10  378   *		type of devices this should be set to NULL.
27871f7a8a341e Quentin Perret  2018-12-03  379   *
27871f7a8a341e Quentin Perret  2018-12-03  380   * Create Energy Model tables for a performance domain using the callbacks
27871f7a8a341e Quentin Perret  2018-12-03  381   * defined in cb.
27871f7a8a341e Quentin Perret  2018-12-03  382   *
27871f7a8a341e Quentin Perret  2018-12-03  383   * If multiple clients register the same performance domain, all but the first
27871f7a8a341e Quentin Perret  2018-12-03  384   * registration will be ignored.
27871f7a8a341e Quentin Perret  2018-12-03  385   *
27871f7a8a341e Quentin Perret  2018-12-03  386   * Return 0 on success
27871f7a8a341e Quentin Perret  2018-12-03  387   */
b4dc5cca354b8a Lukasz Luba     2020-04-10  388  int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states,
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  389  				struct em_data_callback *cb, cpumask_t *cpus)
27871f7a8a341e Quentin Perret  2018-12-03  390  {
27871f7a8a341e Quentin Perret  2018-12-03  391  	unsigned long cap, prev_cap = 0;
27871f7a8a341e Quentin Perret  2018-12-03  392  	struct em_perf_domain *pd;
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  393  	struct em_device *em_dev;
27871f7a8a341e Quentin Perret  2018-12-03 @394  	int cpu, ret = 0;
27871f7a8a341e Quentin Perret  2018-12-03  395  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  396  	if (!dev || !nr_states || !cb)
27871f7a8a341e Quentin Perret  2018-12-03  397  		return -EINVAL;
27871f7a8a341e Quentin Perret  2018-12-03  398  
27871f7a8a341e Quentin Perret  2018-12-03  399  	/*
27871f7a8a341e Quentin Perret  2018-12-03  400  	 * Use a mutex to serialize the registration of performance domains and
27871f7a8a341e Quentin Perret  2018-12-03  401  	 * let the driver-defined callback functions sleep.
27871f7a8a341e Quentin Perret  2018-12-03  402  	 */
27871f7a8a341e Quentin Perret  2018-12-03  403  	mutex_lock(&em_pd_mutex);
27871f7a8a341e Quentin Perret  2018-12-03  404  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  405  	em_dev = _em_dev_find_existing(dev);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  406  	if (em_dev) {
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  407  		mutex_unlock(&em_pd_mutex);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  408  		dev_dbg(dev, "EM: found exisiting pd%d\n", em_dev->id);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  409  		return -EEXIST;
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  410  	}
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  411  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  412  	if (_is_cpu_device(dev)) {
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  413  		if (!cpus) {
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  414  			mutex_unlock(&em_pd_mutex);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  415  			dev_err(dev, "EM: invalid CPU mask\n");
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  416  			return -EINVAL;
27871f7a8a341e Quentin Perret  2018-12-03  417  		}
27871f7a8a341e Quentin Perret  2018-12-03  418  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  419  		/* Make sure we don't register domain for existing CPUs */
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  420  		if (em_cpus_pd_exist(cpus)) {
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  421  			mutex_unlock(&em_pd_mutex);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  422  			return -EEXIST;
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  423  		}
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  424  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  425  		for_each_cpu(cpu, cpus) {
27871f7a8a341e Quentin Perret  2018-12-03  426  			/*
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  427  			 * All CPUs of a domain must have the same
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  428  			 * micro-architecture since they all share the same
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  429  			 * table.
27871f7a8a341e Quentin Perret  2018-12-03  430  			 */
8ec59c0f5f4966 Vincent Guittot 2019-06-17  431  			cap = arch_scale_cpu_capacity(cpu);
27871f7a8a341e Quentin Perret  2018-12-03  432  			if (prev_cap && prev_cap != cap) {
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  433  				dev_err(dev, "EM: CPUs of %*pbl must have the same capacity\n",
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  434  					cpumask_pr_args(cpus));
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  435  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  436  				mutex_unlock(&em_pd_mutex);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  437  				return -EINVAL;
27871f7a8a341e Quentin Perret  2018-12-03  438  			}
27871f7a8a341e Quentin Perret  2018-12-03  439  			prev_cap = cap;
27871f7a8a341e Quentin Perret  2018-12-03  440  		}
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  441  	}
27871f7a8a341e Quentin Perret  2018-12-03  442  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  443  	pd = em_create_pd(dev, nr_states, cb, cpus);
27871f7a8a341e Quentin Perret  2018-12-03  444  	if (!pd) {
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  445  		mutex_unlock(&em_pd_mutex);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  446  		return -EINVAL;
27871f7a8a341e Quentin Perret  2018-12-03  447  	}
27871f7a8a341e Quentin Perret  2018-12-03  448  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  449  	em_dev = kzalloc(sizeof(struct em_device), GFP_KERNEL);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  450  	if (!em_dev) {
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  451  		ret = -ENOMEM;
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  452  		goto free_pd;
27871f7a8a341e Quentin Perret  2018-12-03  453  	}
27871f7a8a341e Quentin Perret  2018-12-03  454  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  455  	em_dev->id = ida_simple_get(&em_dev_ida, 0, 0, GFP_KERNEL);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  456  	if (em_dev->id < 0) {
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  457  		ret = em_dev->id;
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  458  		goto free_em_dev;
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  459  	}
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  460  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  461  	em_dev->em_pd = pd;
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  462  	em_dev->dev = dev;
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  463  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  464  	kref_init(&em_dev->kref);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  465  	list_add(&em_dev->em_dev_list, &em_pd_dev_list);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  466  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  467  	em_debug_create_pd(em_dev);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  468  	dev_dbg(dev, "EM: created perf domain pd%d\n", em_dev->id);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  469  
27871f7a8a341e Quentin Perret  2018-12-03  470  	mutex_unlock(&em_pd_mutex);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  471  	return 0;
27871f7a8a341e Quentin Perret  2018-12-03  472  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  473  free_em_dev:
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  474  	kfree(em_dev);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  475  free_pd:
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  476  	kfree(pd->table);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  477  	kfree(pd);
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  478  
9cf8494b5f4eb8 Lukasz Luba     2020-04-10  479  	mutex_unlock(&em_pd_mutex);
27871f7a8a341e Quentin Perret  2018-12-03  480  	return ret;
27871f7a8a341e Quentin Perret  2018-12-03  481  }
b4dc5cca354b8a Lukasz Luba     2020-04-10  482  EXPORT_SYMBOL_GPL(em_dev_register_perf_domain);
b4dc5cca354b8a Lukasz Luba     2020-04-10  483  

:::::: The code at line 394 was first introduced by commit
:::::: 27871f7a8a341ef5c636a337856369acf8013e4e PM: Introduce an Energy Model management framework

:::::: TO: Quentin Perret <quentin.perret@arm.com>
:::::: CC: Ingo Molnar <mingo@kernel.org>

---
0-DAY CI Kernel Test Service, Intel Corporation
https://lists.01.org/hyperkitty/list/kbuild-all@lists.01.org
Daniel Lezcano April 23, 2020, 3:12 p.m. UTC | #4
On Fri, Apr 10, 2020 at 09:42:04AM +0100, Lukasz Luba wrote:
> Add support for other devices that CPUs. The registration function
> does not require a valid cpumask pointer and is ready to handle new
> devices. Some of the internal structures has been reorganized in order to
> keep consistent view (like removing per_cpu pd pointers). To track usage
> of the Energy Model structures, they are protected with kref.

Why not add the energy model structure in the struct device directly?

For instance for the em_cpu_get() function, the cpu id allows to retrieve the
cpu device and then from there, the energy model instead of browsing another
list. The em_device life cycle will be tied to the struct device.

Then when the struct device and the em_device are connected, add the debugfs
with a struct device list for those which are energy aware, so you end up with
a structure:

struct em_device {
	struct device *dev;
	struct list_head em_dev_list;
};

(a global single dentry for debugfs to do a recursive delete is enough).

Locks when inspecting and add/removal called from the struct device release
function. So no need of an extra refcounting.

Does it make sense?
Lukasz Luba April 23, 2020, 4:57 p.m. UTC | #5
On 4/23/20 4:12 PM, Daniel Lezcano wrote:
> On Fri, Apr 10, 2020 at 09:42:04AM +0100, Lukasz Luba wrote:
>> Add support for other devices that CPUs. The registration function
>> does not require a valid cpumask pointer and is ready to handle new
>> devices. Some of the internal structures has been reorganized in order to
>> keep consistent view (like removing per_cpu pd pointers). To track usage
>> of the Energy Model structures, they are protected with kref.
> 
> Why not add the energy model structure in the struct device directly?

Do you mean this structure?
https://elixir.bootlin.com/linux/latest/source/include/linux/device.h#L537

and to put something like:
struct device {
...
	struct dev_pm_domain	*pm_domain;
#ifdef CONFIG_ENERGY_MODEL
	struct em_perf_domain	*em_pd;
#endif
...
};

> 
> For instance for the em_cpu_get() function, the cpu id allows to retrieve the
> cpu device and then from there, the energy model instead of browsing another
> list. The em_device life cycle will be tied to the struct device.

That would be perfect.

> 
> Then when the struct device and the em_device are connected, add the debugfs
> with a struct device list for those which are energy aware, so you end up with
> a structure:
> 
> struct em_device {
> 	struct device *dev;
> 	struct list_head em_dev_list;
> };
> 
> (a global single dentry for debugfs to do a recursive delete is enough).
> 
> Locks when inspecting and add/removal called from the struct device release
> function. So no need of an extra refcounting.
> 
> Does it make sense?
> 

Indeed it looks much cleaner/simpler.

I will try to address this idea and get rid of refcounting.

This should be doable in this patch (4/10). In the v7 I will keep your
ACKs for other patches that you have already commented.

Thank you for your suggestions and review.

Regards,
Lukasz
Daniel Lezcano April 23, 2020, 5:15 p.m. UTC | #6
On 23/04/2020 18:57, Lukasz Luba wrote:
> 
> 
> On 4/23/20 4:12 PM, Daniel Lezcano wrote:
>> On Fri, Apr 10, 2020 at 09:42:04AM +0100, Lukasz Luba wrote:
>>> Add support for other devices that CPUs. The registration function
>>> does not require a valid cpumask pointer and is ready to handle new
>>> devices. Some of the internal structures has been reorganized in
>>> order to
>>> keep consistent view (like removing per_cpu pd pointers). To track usage
>>> of the Energy Model structures, they are protected with kref.
>>
>> Why not add the energy model structure in the struct device directly?
> 
> Do you mean this structure?
> https://elixir.bootlin.com/linux/latest/source/include/linux/device.h#L537
> 
> and to put something like:
> struct device {
> ...
>     struct dev_pm_domain    *pm_domain;
> #ifdef CONFIG_ENERGY_MODEL
>     struct em_perf_domain    *em_pd;
> #endif
> ...
> };

Yes, exactly.
Lukasz Luba April 23, 2020, 5:19 p.m. UTC | #7
On 4/23/20 6:15 PM, Daniel Lezcano wrote:
> On 23/04/2020 18:57, Lukasz Luba wrote:
>>
>>
>> On 4/23/20 4:12 PM, Daniel Lezcano wrote:
>>> On Fri, Apr 10, 2020 at 09:42:04AM +0100, Lukasz Luba wrote:
>>>> Add support for other devices that CPUs. The registration function
>>>> does not require a valid cpumask pointer and is ready to handle new
>>>> devices. Some of the internal structures has been reorganized in
>>>> order to
>>>> keep consistent view (like removing per_cpu pd pointers). To track usage
>>>> of the Energy Model structures, they are protected with kref.
>>>
>>> Why not add the energy model structure in the struct device directly?
>>
>> Do you mean this structure?
>> https://elixir.bootlin.com/linux/latest/source/include/linux/device.h#L537
>>
>> and to put something like:
>> struct device {
>> ...
>>      struct dev_pm_domain    *pm_domain;
>> #ifdef CONFIG_ENERGY_MODEL
>>      struct em_perf_domain    *em_pd;
>> #endif
>> ...
>> };
> 
> Yes, exactly.
> 

Thank you for the confirmation. I am going to start working on it.

BTW, thank you for all of the ACKs and reviews.

Regards,
Lukasz
diff mbox series

Patch

diff --git a/include/linux/energy_model.h b/include/linux/energy_model.h
index 7076cb22b247..f6b8077cc875 100644
--- a/include/linux/energy_model.h
+++ b/include/linux/energy_model.h
@@ -12,8 +12,10 @@ 
 
 /**
  * em_perf_state - Performance state of a performance domain
- * @frequency:	The CPU frequency in KHz, for consistency with CPUFreq
- * @power:	The power consumed by 1 CPU at this level, in milli-watts
+ * @frequency:	The frequency in KHz, for consistency with CPUFreq
+ * @power:	The power consumed at this level, in milli-watts (by 1 CPU or
+		by a registered device). It can be a total power: static and
+		dynamic.
  * @cost:	The cost coefficient associated with this level, used during
  *		energy calculation. Equal to: power * max_frequency / frequency
  */
@@ -27,12 +29,15 @@  struct em_perf_state {
  * em_perf_domain - Performance domain
  * @table:		List of performance states, in ascending order
  * @nr_perf_states:	Number of performance states
- * @cpus:		Cpumask covering the CPUs of the domain
+ * @cpus:		Cpumask covering the CPUs of the domain. It's here
+ *			for performance reasons to avoid potential cache
+ *			misses during energy calculations in the scheduler
  *
- * A "performance domain" represents a group of CPUs whose performance is
- * scaled together. All CPUs of a performance domain must have the same
- * micro-architecture. Performance domains often have a 1-to-1 mapping with
- * CPUFreq policies.
+ * In case of CPU device, a "performance domain" represents a group of CPUs
+ * whose performance is scaled together. All CPUs of a performance domain
+ * must have the same micro-architecture. Performance domains often have
+ * a 1-to-1 mapping with CPUFreq policies. In case of other devices the 'cpus'
+ * field is unused.
  */
 struct em_perf_domain {
 	struct em_perf_state *table;
@@ -71,10 +76,13 @@  struct em_data_callback {
 #define EM_DATA_CB(_active_power_cb) { .active_power = &_active_power_cb }
 
 struct em_perf_domain *em_cpu_get(int cpu);
+struct em_perf_domain *em_pd_get(struct device *dev);
+void em_pd_put(struct device *dev);
 int em_register_perf_domain(cpumask_t *span, unsigned int nr_states,
 						struct em_data_callback *cb);
 int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states,
 				struct em_data_callback *cb, cpumask_t *span);
+void em_dev_unregister_perf_domain(struct device *dev);
 
 /**
  * em_pd_energy() - Estimates the energy consumed by the CPUs of a perf. domain
@@ -184,10 +192,20 @@  int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states,
 {
 	return -EINVAL;
 }
+static inline void em_dev_unregister_perf_domain(struct device *dev)
+{
+}
 static inline struct em_perf_domain *em_cpu_get(int cpu)
 {
 	return NULL;
 }
+static inline struct em_perf_domain *em_pd_get(struct device *dev)
+{
+	return NULL;
+}
+static inline void em_pd_put(struct device *dev)
+{
+}
 static inline unsigned long em_pd_energy(struct em_perf_domain *pd,
 			unsigned long max_util, unsigned long sum_util)
 {
diff --git a/kernel/power/energy_model.c b/kernel/power/energy_model.c
index 5b8a1566526a..5967a21b56fc 100644
--- a/kernel/power/energy_model.c
+++ b/kernel/power/energy_model.c
@@ -2,8 +2,9 @@ 
 /*
  * Energy Model of CPUs
  *
- * Copyright (c) 2018, Arm ltd.
+ * Copyright (c) 2018-2020, Arm ltd.
  * Written by: Quentin Perret, Arm ltd.
+ * Improvements provided by: Lukasz Luba, Arm ltd.
  */
 
 #define pr_fmt(fmt) "energy_model: " fmt
@@ -12,17 +13,46 @@ 
 #include <linux/cpumask.h>
 #include <linux/debugfs.h>
 #include <linux/energy_model.h>
+#include <linux/idr.h>
+#include <linux/kref.h>
 #include <linux/sched/topology.h>
 #include <linux/slab.h>
 
-/* Mapping of each CPU to the performance domain to which it belongs. */
-static DEFINE_PER_CPU(struct em_perf_domain *, em_data);
+/**
+ * em_device - Performance domain wrapper for device
+ * @em_pd:		Performance domain which carries the energy model
+ * @dev:		Device for which this performance domain is set
+ * @id:			Id of this performance domain
+ * @em_dev_list:	List entry to connect all the devices perf. domain
+ * @debug_dir:		Optional debug directory
+ *
+ * Internal structure. It contains a "performance domain" and the corresponding
+ * device.
+ */
+struct em_device {
+	struct em_perf_domain *em_pd;
+	struct device *dev;
+	int id;
+	struct kref kref;
+	struct list_head em_dev_list;
+#ifdef CONFIG_DEBUG_FS
+	struct dentry *debug_dir;
+#endif
+};
 
+static DEFINE_IDA(em_dev_ida);
 /*
  * Mutex serializing the registrations of performance domains and letting
  * callbacks defined by drivers sleep.
  */
 static DEFINE_MUTEX(em_pd_mutex);
+/* List of devices' energy model, protected by 'em_pd_mutex' */
+static LIST_HEAD(em_pd_dev_list);
+
+static bool _is_cpu_device(struct device *dev)
+{
+	return (dev->bus == &cpu_subsys);
+}
 
 #ifdef CONFIG_DEBUG_FS
 static struct dentry *rootdir;
@@ -43,28 +73,74 @@  static void em_debug_create_ps(struct em_perf_state *ps, struct dentry *pd)
 
 static int em_debug_cpus_show(struct seq_file *s, void *unused)
 {
-	seq_printf(s, "%*pbl\n", cpumask_pr_args(to_cpumask(s->private)));
+	struct em_perf_domain *em_pd = s->private;
+	struct cpumask *mask = em_span_cpus(em_pd);
+
+	seq_printf(s, "%*pbl\n", cpumask_pr_args(mask));
 
 	return 0;
 }
 DEFINE_SHOW_ATTRIBUTE(em_debug_cpus);
 
-static void em_debug_create_pd(struct em_perf_domain *pd, int cpu)
+static int em_debug_dev_show(struct seq_file *s, void *unused)
 {
+	struct em_device *em_dev = s->private;
+	const char *domain_name;
+
+	domain_name = dev_name(em_dev->dev);
+	if (!domain_name)
+		domain_name = "unknown";
+
+	seq_printf(s, "%s\n", domain_name);
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(em_debug_dev);
+
+static int em_debug_type_show(struct seq_file *s, void *unused)
+{
+	struct em_device *em_dev = s->private;
+
+	if (_is_cpu_device(em_dev->dev))
+		seq_puts(s, "EM cpufreq device\n");
+	else
+		seq_puts(s, "EM devfreq device\n");
+
+	return 0;
+}
+DEFINE_SHOW_ATTRIBUTE(em_debug_type);
+
+static void em_debug_create_pd(struct em_device *em_dev)
+{
+	struct em_perf_domain *em_pd = em_dev->em_pd;
 	struct dentry *d;
 	char name[8];
 	int i;
 
-	snprintf(name, sizeof(name), "pd%d", cpu);
+	snprintf(name, sizeof(name), "pd%d", em_dev->id);
 
 	/* Create the directory of the performance domain */
 	d = debugfs_create_dir(name, rootdir);
 
-	debugfs_create_file("cpus", 0444, d, pd->cpus, &em_debug_cpus_fops);
+	if (_is_cpu_device(em_dev->dev))
+		debugfs_create_file("cpus", 0444, d, em_pd,
+				    &em_debug_cpus_fops);
+	else
+		debugfs_create_file("dev_name", 0444, d, em_dev,
+				    &em_debug_dev_fops);
+
+	debugfs_create_file("type", 0444, d, em_dev, &em_debug_type_fops);
 
 	/* Create a sub-directory for each performance state */
-	for (i = 0; i < pd->nr_perf_states; i++)
-		em_debug_create_ps(&pd->table[i], d);
+	for (i = 0; i < em_pd->nr_perf_states; i++)
+		em_debug_create_ps(&em_pd->table[i], d);
+
+	em_dev->debug_dir = d;
+}
+
+static void em_debug_remove_pd(struct em_device *em_dev)
+{
+	debugfs_remove_recursive(em_dev->debug_dir);
 }
 
 static int __init em_debug_init(void)
@@ -76,40 +152,34 @@  static int __init em_debug_init(void)
 }
 core_initcall(em_debug_init);
 #else /* CONFIG_DEBUG_FS */
-static void em_debug_create_pd(struct em_perf_domain *pd, int cpu) {}
+static void em_debug_create_pd(struct em_device *em_dev) {}
+static void em_debug_remove_pd(struct em_device *em_dev) {}
 #endif
-static struct em_perf_domain *
-em_create_pd(struct device *dev, int nr_states, struct em_data_callback *cb,
-	     cpumask_t *span)
+
+static int em_create_perf_table(struct device *dev, struct em_perf_domain *pd,
+				int nr_states, struct em_data_callback *cb)
 {
 	unsigned long opp_eff, prev_opp_eff = ULONG_MAX;
 	unsigned long power, freq, prev_freq = 0;
-	int i, ret, cpu = cpumask_first(span);
 	struct em_perf_state *table;
-	struct em_perf_domain *pd;
+	int i, ret;
 	u64 fmax;
 
-	if (!cb->active_power)
-		return NULL;
-
-	pd = kzalloc(sizeof(*pd) + cpumask_size(), GFP_KERNEL);
-	if (!pd)
-		return NULL;
-
 	table = kcalloc(nr_states, sizeof(*table), GFP_KERNEL);
 	if (!table)
-		goto free_pd;
+		return -ENOMEM;
 
 	/* Build the list of performance states for this performance domain */
 	for (i = 0, freq = 0; i < nr_states; i++, freq++) {
 		/*
 		 * active_power() is a driver callback which ceils 'freq' to
-		 * lowest performance state of 'cpu' above 'freq' and updates
+		 * lowest performance state of 'dev' above 'freq' and updates
 		 * 'power' and 'freq' accordingly.
 		 */
 		ret = cb->active_power(&power, &freq, dev);
 		if (ret) {
-			pr_err("pd%d: invalid perf. state: %d\n", cpu, ret);
+			dev_err(dev, "EM: invalid perf. state: %d\n",
+				ret);
 			goto free_ps_table;
 		}
 
@@ -118,7 +188,8 @@  em_create_pd(struct device *dev, int nr_states, struct em_data_callback *cb,
 		 * higher performance states.
 		 */
 		if (freq <= prev_freq) {
-			pr_err("pd%d: non-increasing freq: %lu\n", cpu, freq);
+			dev_err(dev, "EM: non-increasing freq: %lu\n",
+				freq);
 			goto free_ps_table;
 		}
 
@@ -127,7 +198,8 @@  em_create_pd(struct device *dev, int nr_states, struct em_data_callback *cb,
 		 * positive, in milli-watts and to fit into 16 bits.
 		 */
 		if (!power || power > EM_MAX_POWER) {
-			pr_err("pd%d: invalid power: %lu\n", cpu, power);
+			dev_err(dev, "EM: invalid power: %lu\n",
+				power);
 			goto free_ps_table;
 		}
 
@@ -142,8 +214,8 @@  em_create_pd(struct device *dev, int nr_states, struct em_data_callback *cb,
 		 */
 		opp_eff = freq / power;
 		if (opp_eff >= prev_opp_eff)
-			pr_warn("pd%d: hertz/watts ratio non-monotonically decreasing: em_perf_state %d >= em_perf_state%d\n",
-					cpu, i, i - 1);
+			dev_dbg(dev, "EM: hertz/watts ratio non-monotonically decreasing: em_perf_state %d >= em_perf_state%d\n",
+					i, i - 1);
 		prev_opp_eff = opp_eff;
 	}
 
@@ -156,30 +228,143 @@  em_create_pd(struct device *dev, int nr_states, struct em_data_callback *cb,
 
 	pd->table = table;
 	pd->nr_perf_states = nr_states;
-	cpumask_copy(to_cpumask(pd->cpus), span);
-
-	em_debug_create_pd(pd, cpu);
 
-	return pd;
+	return 0;
 
 free_ps_table:
 	kfree(table);
-free_pd:
-	kfree(pd);
+	return -EINVAL;
+}
+
+static struct em_perf_domain *em_create_pd(struct device *dev, int nr_states,
+					   struct em_data_callback *cb,
+					   cpumask_t *cpus)
+{
+	struct em_perf_domain *pd;
+	int ret;
+
+	if (_is_cpu_device(dev)) {
+		pd = kzalloc(sizeof(*pd) + cpumask_size(), GFP_KERNEL);
+		if (!pd)
+			return NULL;
+
+		cpumask_copy(em_span_cpus(pd), cpus);
+	} else {
+		pd = kzalloc(sizeof(*pd), GFP_KERNEL);
+		if (!pd)
+			return NULL;
+	}
+
+	ret = em_create_perf_table(dev, pd, nr_states, cb);
+	if (ret) {
+		kfree(pd);
+		return NULL;
+	}
+
+	return pd;
+}
+
+static bool em_cpus_pd_exist(cpumask_t *span)
+{
+	struct em_device *em_dev;
+
+	/* The em_pd_mutex should be held already. */
+	if (list_empty(&em_pd_dev_list))
+		return 0;
+
+	list_for_each_entry(em_dev, &em_pd_dev_list, em_dev_list) {
+		if (!_is_cpu_device(em_dev->dev))
+			continue;
+
+		if (cpumask_intersects(span, em_span_cpus(em_dev->em_pd)))
+			return 1;
+	}
+
+	return 0;
+}
+
+static struct em_device *_em_dev_find_existing(struct device *dev)
+{
+	struct em_device *em_dev;
+
+	/* The em_pd_mutex should be held already. */
+	if (list_empty(&em_pd_dev_list))
+		return NULL;
+
+	list_for_each_entry(em_dev, &em_pd_dev_list, em_dev_list)
+		if (em_dev->dev == dev)
+			return em_dev;
 
 	return NULL;
 }
 
+/**
+ * em_pd_get() - Return the performance domain for a device
+ * @dev : Device to find the performance domain for
+ *
+ * Returns the performance domain to which 'dev' belongs, or NULL if it doesn't
+ * exist.
+ */
+struct em_perf_domain *em_pd_get(struct device *dev)
+{
+	struct em_perf_domain *pd = NULL;
+	struct em_device *em_dev;
+
+	if (IS_ERR_OR_NULL(dev))
+		return NULL;
+
+	if (_is_cpu_device(dev))
+		return em_cpu_get(dev->id);
+
+	mutex_lock(&em_pd_mutex);
+
+	em_dev = _em_dev_find_existing(dev);
+	if (em_dev) {
+		kref_get(&em_dev->kref);
+		pd = em_dev->em_pd;
+	}
+
+	mutex_unlock(&em_pd_mutex);
+	return pd;
+}
+EXPORT_SYMBOL_GPL(em_pd_get);
+
 /**
  * em_cpu_get() - Return the performance domain for a CPU
  * @cpu : CPU to find the performance domain for
  *
- * Return: the performance domain to which 'cpu' belongs, or NULL if it doesn't
+ * This function is especially useful for subsystems which operate on CPU id,
+ * like topology setup code does. It simplifies code in those subsystems.
+ *
+ * Returns the performance domain to which 'cpu' belongs, or NULL if it doesn't
  * exist.
  */
 struct em_perf_domain *em_cpu_get(int cpu)
 {
-	return READ_ONCE(per_cpu(em_data, cpu));
+	struct em_device *em_dev;
+
+	mutex_lock(&em_pd_mutex);
+
+	if (list_empty(&em_pd_dev_list))
+		goto unlock;
+
+	list_for_each_entry(em_dev, &em_pd_dev_list, em_dev_list) {
+		if (!_is_cpu_device(em_dev->dev))
+			continue;
+
+		if (cpumask_test_cpu(cpu, em_span_cpus(em_dev->em_pd))) {
+			/*
+			 * Don't increment kref here, we won't free the EM
+			 * in CPU hotlpug.
+			 */
+			mutex_unlock(&em_pd_mutex);
+			return em_dev->em_pd;
+		}
+	}
+
+unlock:
+	mutex_unlock(&em_pd_mutex);
+	return NULL;
 }
 EXPORT_SYMBOL_GPL(em_cpu_get);
 
@@ -188,7 +373,7 @@  EXPORT_SYMBOL_GPL(em_cpu_get);
  * @dev		: Device for which the EM is to register
  * @nr_states	: Number of performance states to register
  * @cb		: Callback functions providing the data of the Energy Model
- * @span	: Pointer to cpumask_t, which in case of a CPU device is
+ * @cpus	: Pointer to cpumask_t, which in case of a CPU device is
  *		obligatory. It can be taken from i.e. 'policy->cpus'. For other
  *		type of devices this should be set to NULL.
  *
@@ -201,13 +386,14 @@  EXPORT_SYMBOL_GPL(em_cpu_get);
  * Return 0 on success
  */
 int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states,
-				struct em_data_callback *cb, cpumask_t *span)
+				struct em_data_callback *cb, cpumask_t *cpus)
 {
 	unsigned long cap, prev_cap = 0;
 	struct em_perf_domain *pd;
+	struct em_device *em_dev;
 	int cpu, ret = 0;
 
-	if (!dev || !span || !nr_states || !cb)
+	if (!dev || !nr_states || !cb)
 		return -EINVAL;
 
 	/*
@@ -216,51 +402,104 @@  int em_dev_register_perf_domain(struct device *dev, unsigned int nr_states,
 	 */
 	mutex_lock(&em_pd_mutex);
 
-	for_each_cpu(cpu, span) {
-		/* Make sure we don't register again an existing domain. */
-		if (READ_ONCE(per_cpu(em_data, cpu))) {
-			ret = -EEXIST;
-			goto unlock;
+	em_dev = _em_dev_find_existing(dev);
+	if (em_dev) {
+		mutex_unlock(&em_pd_mutex);
+		dev_dbg(dev, "EM: found exisiting pd%d\n", em_dev->id);
+		return -EEXIST;
+	}
+
+	if (_is_cpu_device(dev)) {
+		if (!cpus) {
+			mutex_unlock(&em_pd_mutex);
+			dev_err(dev, "EM: invalid CPU mask\n");
+			return -EINVAL;
 		}
 
-		/*
-		 * All CPUs of a domain must have the same micro-architecture
-		 * since they all share the same table.
-		 */
-		cap = arch_scale_cpu_capacity(cpu);
-		if (prev_cap && prev_cap != cap) {
-			pr_err("CPUs of %*pbl must have the same capacity\n",
-							cpumask_pr_args(span));
-			ret = -EINVAL;
-			goto unlock;
+		/* Make sure we don't register domain for existing CPUs */
+		if (em_cpus_pd_exist(cpus)) {
+			mutex_unlock(&em_pd_mutex);
+			return -EEXIST;
+		}
+
+		for_each_cpu(cpu, cpus) {
+			/*
+			 * All CPUs of a domain must have the same
+			 * micro-architecture since they all share the same
+			 * table.
+			 */
+			cap = arch_scale_cpu_capacity(cpu);
+			if (prev_cap && prev_cap != cap) {
+				dev_err(dev, "EM: CPUs of %*pbl must have the same capacity\n",
+					cpumask_pr_args(cpus));
+
+				mutex_unlock(&em_pd_mutex);
+				return -EINVAL;
+			}
+			prev_cap = cap;
 		}
-		prev_cap = cap;
 	}
 
-	/* Create the performance domain and add it to the Energy Model. */
-	pd = em_create_pd(dev, nr_states, cb, span);
+	pd = em_create_pd(dev, nr_states, cb, cpus);
 	if (!pd) {
-		ret = -EINVAL;
-		goto unlock;
+		mutex_unlock(&em_pd_mutex);
+		return -EINVAL;
 	}
 
-	for_each_cpu(cpu, span) {
-		/*
-		 * The per-cpu array can be read concurrently from em_cpu_get().
-		 * The barrier enforces the ordering needed to make sure readers
-		 * can only access well formed em_perf_domain structs.
-		 */
-		smp_store_release(per_cpu_ptr(&em_data, cpu), pd);
+	em_dev = kzalloc(sizeof(struct em_device), GFP_KERNEL);
+	if (!em_dev) {
+		ret = -ENOMEM;
+		goto free_pd;
 	}
 
-	pr_debug("Created perf domain %*pbl\n", cpumask_pr_args(span));
-unlock:
+	em_dev->id = ida_simple_get(&em_dev_ida, 0, 0, GFP_KERNEL);
+	if (em_dev->id < 0) {
+		ret = em_dev->id;
+		goto free_em_dev;
+	}
+
+	em_dev->em_pd = pd;
+	em_dev->dev = dev;
+
+	kref_init(&em_dev->kref);
+	list_add(&em_dev->em_dev_list, &em_pd_dev_list);
+
+	em_debug_create_pd(em_dev);
+	dev_dbg(dev, "EM: created perf domain pd%d\n", em_dev->id);
+
 	mutex_unlock(&em_pd_mutex);
+	return 0;
 
+free_em_dev:
+	kfree(em_dev);
+free_pd:
+	kfree(pd->table);
+	kfree(pd);
+
+	mutex_unlock(&em_pd_mutex);
 	return ret;
 }
 EXPORT_SYMBOL_GPL(em_dev_register_perf_domain);
 
+static void _em_release(struct kref *ref)
+{
+	struct em_device *em_dev = container_of(ref, struct em_device, kref);
+	struct em_perf_domain *pd = em_dev->em_pd;
+
+	dev_dbg(em_dev->dev, "EM: freeing perf domain pd%d\n", em_dev->id);
+
+	/* The em_pd_mutex is already locked. */
+	list_del(&em_dev->em_dev_list);
+
+	em_debug_remove_pd(em_dev);
+
+	ida_simple_remove(&em_dev_ida, em_dev->id);
+
+	kfree(pd->table);
+	kfree(pd);
+	kfree(em_dev);
+}
+
 /**
  * em_register_perf_domain() - Register the Energy Model of a performance domain
  * @span	: Mask of CPUs in the performance domain
@@ -285,3 +524,59 @@  int em_register_perf_domain(cpumask_t *span, unsigned int nr_states,
 	return em_dev_register_perf_domain(cpu_dev, nr_states, cb, span);
 }
 EXPORT_SYMBOL_GPL(em_register_perf_domain);
+
+/**
+ * em_dev_unregister_perf_domain() - Unregister Energy Model (EM) for a device
+ * @dev		: Device for which the EM is registered
+ *
+ * Try to unregister the EM for the specified device (it checks current
+ * reference counter). The EM for CPUs will not be freed.
+ */
+void em_dev_unregister_perf_domain(struct device *dev)
+{
+	struct em_device *em_dev, *tmp;
+
+	if (IS_ERR_OR_NULL(dev))
+		return;
+
+	/* We don't support freeing CPU structures in hotplug */
+	if (_is_cpu_device(dev)) {
+		dev_dbg_once(dev, "EM: the structures are not going to be removed\n");
+		return;
+	}
+
+	mutex_lock(&em_pd_mutex);
+
+	if (list_empty(&em_pd_dev_list)) {
+		mutex_unlock(&em_pd_mutex);
+		return;
+	}
+
+	list_for_each_entry_safe(em_dev, tmp, &em_pd_dev_list, em_dev_list) {
+		if (em_dev->dev == dev) {
+			kref_put(&em_dev->kref, _em_release);
+			break;
+		}
+	}
+
+	mutex_unlock(&em_pd_mutex);
+}
+EXPORT_SYMBOL_GPL(em_dev_unregister_perf_domain);
+
+/**
+ * em_pd_put() - Decrement reference of the Energy Model (EM) for the device
+ * @dev		: Device for which the EM is registered
+ *
+ * Decrement reference of the EM for the specified device. If it was the last
+ * reference then it will trigger cleaning. The EM for CPUs will not be freed,
+ * though. It goes in pair with em_pd_get() (which incremented a kref counter).
+ * This should be called when the code which called em_pd_get() has finished
+ * its work with EM structs and won't use them in future. Typical places where
+ * this should be called are e.g. driver unregister function or framework clean
+ * up functions.
+ */
+void em_pd_put(struct device *dev)
+{
+	em_dev_unregister_perf_domain(dev);
+}
+EXPORT_SYMBOL_GPL(em_pd_put);