| Message ID | 20200416104707.20219-2-david@redhat.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | mm/memory_hotplug: handle memblocks only with CONFIG_ARCH_KEEP_MEMBLOCK | expand |
> A hotadded node/pgdat will span no pages at all, until memory is moved to > the zone/node via move_pfn_range_to_zone() -> resize_pgdat_range - e.g., > when onlining memory blocks. We don't have to initialize the > node_start_pfn to the memory we are adding. > > Note: we'll also end up with pgdat->node_start_pfn == 0 when offlined the > last memory block belonging to a node (via remove_pfn_range_from_zone()-> > update_pgdat_span()). > > Cc: Andrew Morton <akpm@linux-foundation.org> > Cc: Michal Hocko <mhocko@kernel.org> > Cc: Baoquan He <bhe@redhat.com> > Cc: Oscar Salvador <osalvador@suse.de> > Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> > Signed-off-by: David Hildenbrand <david@redhat.com> > --- > mm/memory_hotplug.c | 15 ++++++--------- > 1 file changed, 6 insertions(+), 9 deletions(-) > > diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c > index 47cf6036eb31..9b15ce465be2 100644 > --- a/mm/memory_hotplug.c > +++ b/mm/memory_hotplug.c > @@ -866,10 +866,9 @@ static void reset_node_present_pages(pg_data_t *pgdat) > } > > /* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */ > -static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start) > +static pg_data_t __ref *hotadd_new_pgdat(int nid) > { > struct pglist_data *pgdat; > - unsigned long start_pfn = PFN_DOWN(start); > > pgdat = NODE_DATA(nid); > if (!pgdat) { > @@ -899,9 +898,8 @@ static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start) > } > > /* we can use NODE_DATA(nid) from here */ > - > pgdat->node_id = nid; > - pgdat->node_start_pfn = start_pfn; > + pgdat->node_start_pfn = 0; > > /* init node's zones as empty zones, we don't have any present pages.*/ > free_area_init_core_hotplug(nid); > @@ -936,7 +934,6 @@ static void rollback_node_hotadd(int nid) > /** > * try_online_node - online a node if offlined > * @nid: the node ID > - * @start: start addr of the node > * @set_node_online: Whether we want to online the node > * called by cpu_up() to online a node without onlined memory. > * > @@ -945,7 +942,7 @@ static void rollback_node_hotadd(int nid) > * 0 -> the node is already online > * -ENOMEM -> the node could not be allocated > */ > -static int __try_online_node(int nid, u64 start, bool set_node_online) > +static int __try_online_node(int nid, bool set_node_online) > { > pg_data_t *pgdat; > int ret = 1; > @@ -953,7 +950,7 @@ static int __try_online_node(int nid, u64 start, bool set_node_online) > if (node_online(nid)) > return 0; > > - pgdat = hotadd_new_pgdat(nid, start); > + pgdat = hotadd_new_pgdat(nid); > if (!pgdat) { > pr_err("Cannot online node %d due to NULL pgdat\n", nid); > ret = -ENOMEM; > @@ -977,7 +974,7 @@ int try_online_node(int nid) > int ret; > > mem_hotplug_begin(); > - ret = __try_online_node(nid, 0, true); > + ret = __try_online_node(nid, true); > mem_hotplug_done(); > return ret; > } > @@ -1031,7 +1028,7 @@ int __ref add_memory_resource(int nid, struct resource *res) > */ > memblock_add_node(start, size, nid); > > - ret = __try_online_node(nid, start, false); > + ret = __try_online_node(nid, false); > if (ret < 0) > goto error; > new_node = ret; > -- Looks right thing to me. Will wait for others to comment. Acked-by: Pankaj Gupta <pankaj.gupta.linux@gmail.com> > 2.25.1 >
Sorry for the late reply On Thu 16-04-20 12:47:06, David Hildenbrand wrote: > A hotadded node/pgdat will span no pages at all, until memory is moved to > the zone/node via move_pfn_range_to_zone() -> resize_pgdat_range - e.g., > when onlining memory blocks. We don't have to initialize the > node_start_pfn to the memory we are adding. You are right that the node is empty at this phase but that is already reflected by zero present pages (hmm, I do not see spanned pages to be set 0 though). What I am missing here is why this is an improvement. The new node is already visible here and I do not see why we hide the information we already know. > Note: we'll also end up with pgdat->node_start_pfn == 0 when offlined the > last memory block belonging to a node (via remove_pfn_range_from_zone()-> > update_pgdat_span()). > > Cc: Andrew Morton <akpm@linux-foundation.org> > Cc: Michal Hocko <mhocko@kernel.org> > Cc: Baoquan He <bhe@redhat.com> > Cc: Oscar Salvador <osalvador@suse.de> > Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> > Signed-off-by: David Hildenbrand <david@redhat.com> > --- > mm/memory_hotplug.c | 15 ++++++--------- > 1 file changed, 6 insertions(+), 9 deletions(-) > > diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c > index 47cf6036eb31..9b15ce465be2 100644 > --- a/mm/memory_hotplug.c > +++ b/mm/memory_hotplug.c > @@ -866,10 +866,9 @@ static void reset_node_present_pages(pg_data_t *pgdat) > } > > /* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */ > -static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start) > +static pg_data_t __ref *hotadd_new_pgdat(int nid) > { > struct pglist_data *pgdat; > - unsigned long start_pfn = PFN_DOWN(start); > > pgdat = NODE_DATA(nid); > if (!pgdat) { > @@ -899,9 +898,8 @@ static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start) > } > > /* we can use NODE_DATA(nid) from here */ > - > pgdat->node_id = nid; > - pgdat->node_start_pfn = start_pfn; > + pgdat->node_start_pfn = 0; > > /* init node's zones as empty zones, we don't have any present pages.*/ > free_area_init_core_hotplug(nid); > @@ -936,7 +934,6 @@ static void rollback_node_hotadd(int nid) > /** > * try_online_node - online a node if offlined > * @nid: the node ID > - * @start: start addr of the node > * @set_node_online: Whether we want to online the node > * called by cpu_up() to online a node without onlined memory. > * > @@ -945,7 +942,7 @@ static void rollback_node_hotadd(int nid) > * 0 -> the node is already online > * -ENOMEM -> the node could not be allocated > */ > -static int __try_online_node(int nid, u64 start, bool set_node_online) > +static int __try_online_node(int nid, bool set_node_online) > { > pg_data_t *pgdat; > int ret = 1; > @@ -953,7 +950,7 @@ static int __try_online_node(int nid, u64 start, bool set_node_online) > if (node_online(nid)) > return 0; > > - pgdat = hotadd_new_pgdat(nid, start); > + pgdat = hotadd_new_pgdat(nid); > if (!pgdat) { > pr_err("Cannot online node %d due to NULL pgdat\n", nid); > ret = -ENOMEM; > @@ -977,7 +974,7 @@ int try_online_node(int nid) > int ret; > > mem_hotplug_begin(); > - ret = __try_online_node(nid, 0, true); > + ret = __try_online_node(nid, true); > mem_hotplug_done(); > return ret; > } > @@ -1031,7 +1028,7 @@ int __ref add_memory_resource(int nid, struct resource *res) > */ > memblock_add_node(start, size, nid); > > - ret = __try_online_node(nid, start, false); > + ret = __try_online_node(nid, false); > if (ret < 0) > goto error; > new_node = ret; > -- > 2.25.1
On 21.04.20 14:30, Michal Hocko wrote: > Sorry for the late reply > > On Thu 16-04-20 12:47:06, David Hildenbrand wrote: >> A hotadded node/pgdat will span no pages at all, until memory is moved to >> the zone/node via move_pfn_range_to_zone() -> resize_pgdat_range - e.g., >> when onlining memory blocks. We don't have to initialize the >> node_start_pfn to the memory we are adding. > > You are right that the node is empty at this phase but that is already > reflected by zero present pages (hmm, I do not see spanned pages to be > set 0 though). What I am missing here is why this is an improvement. The > new node is already visible here and I do not see why we hide the > information we already know. "information we already know" - no, not before we online the memory. Before onlining, it's just setting node_start_pfn to *some value* to be overwritten in move_pfn_range_to_zone()->resize_pgdat_range(). (I have some more patches to clean up __try_online_node(), and this change here makes it clear that there isn't any magic happening in __try_online_node() related to the start pfn and memblocks - see patch #2)
On Tue 21-04-20 14:35:12, David Hildenbrand wrote: > On 21.04.20 14:30, Michal Hocko wrote: > > Sorry for the late reply > > > > On Thu 16-04-20 12:47:06, David Hildenbrand wrote: > >> A hotadded node/pgdat will span no pages at all, until memory is moved to > >> the zone/node via move_pfn_range_to_zone() -> resize_pgdat_range - e.g., > >> when onlining memory blocks. We don't have to initialize the > >> node_start_pfn to the memory we are adding. > > > > You are right that the node is empty at this phase but that is already > > reflected by zero present pages (hmm, I do not see spanned pages to be > > set 0 though). What I am missing here is why this is an improvement. The > > new node is already visible here and I do not see why we hide the > > information we already know. > > "information we already know" - no, not before we online the memory. Is this really the case? All add_memory_resource users operate on a physical memory range. > Before onlining, it's just setting node_start_pfn to *some value* to be > overwritten in move_pfn_range_to_zone()->resize_pgdat_range(). Yes the value is overwritten but I am not sure this is actually correct thing to do. I cannot remember why I've chosen to do that. It doesn't really seem unlikely to online node in a higher physical address. Btw. one thing that I have in my notes, I was never able to actually test the no numa node case. Because I have always been testing with node being allocated during the boot. Do you have any way to trigger this path?
On 21.04.20 14:52, Michal Hocko wrote: > On Tue 21-04-20 14:35:12, David Hildenbrand wrote: >> On 21.04.20 14:30, Michal Hocko wrote: >>> Sorry for the late reply >>> >>> On Thu 16-04-20 12:47:06, David Hildenbrand wrote: >>>> A hotadded node/pgdat will span no pages at all, until memory is moved to >>>> the zone/node via move_pfn_range_to_zone() -> resize_pgdat_range - e.g., >>>> when onlining memory blocks. We don't have to initialize the >>>> node_start_pfn to the memory we are adding. >>> >>> You are right that the node is empty at this phase but that is already >>> reflected by zero present pages (hmm, I do not see spanned pages to be >>> set 0 though). What I am missing here is why this is an improvement. The >>> new node is already visible here and I do not see why we hide the >>> information we already know. >> >> "information we already know" - no, not before we online the memory. > > Is this really the case? All add_memory_resource users operate on a > physical memory range. Having the first add_memory() to magically set node_start_pfn of a hotplugged node isn't dangerous, I think we agree on that. It's just completely unnecessary here and at least left me confused why this is needed at all- because the node start/end pfn is only really touched when onlining/offlining memory (when resizing the zone and the pgdat). > >> Before onlining, it's just setting node_start_pfn to *some value* to be >> overwritten in move_pfn_range_to_zone()->resize_pgdat_range(). > > Yes the value is overwritten but I am not sure this is actually correct > thing to do. I cannot remember why I've chosen to do that. It doesn't > really seem unlikely to online node in a higher physical address. > Well, we decided to glue the node span to onlining/offlining of memory. So, the value really has no meaning without any of that memory being online/the node span being 0. > Btw. one thing that I have in my notes, I was never able to actually > test the no numa node case. Because I have always been testing with node > being allocated during the boot. Do you have any way to trigger this > path? Sure, here is my test case #! /bin/bash sudo qemu-system-x86_64 \ --enable-kvm \ -m 4G,maxmem=20G,slots=2 \ -smp sockets=2,cores=2 \ -numa node,nodeid=0,cpus=0-1,mem=4G -numa node,nodeid=1,mem=0G \ -kernel /home/dhildenb/git/linux/arch/x86_64/boot/bzImage \ -append "console=ttyS0 rd.shell rd.luks=0 rd.lvm=0 rd.md=0 rd.dm=0 page_owner=on" \ -initrd /boot/initramfs-5.4.7-200.fc31.x86_64.img \ -machine pc \ -nographic \ -nodefaults \ -chardev stdio,id=serial \ -device isa-serial,chardev=serial \ -chardev socket,id=monitor,path=/var/tmp/monitor,server,nowait \ -mon chardev=monitor,mode=readline \ -device virtio-balloon \ -object memory-backend-ram,id=mem0,size=512M \ -object memory-backend-ram,id=mem1,size=512M \ -device pc-dimm,id=dimm0,memdev=mem0,node=1 \ -device pc-dimm,id=dimm1,memdev=mem1,node=1 Instead of coldplugging the DIMMs to node 1, you could also hotplug them later (let me know if you need information on how to do that). I use this test to verify that the node is properly onlined/offlined once I unplug/replug the two DIMMs (e.g., after onlining/offlining the memory blocks).
On Tue 21-04-20 15:06:20, David Hildenbrand wrote: > On 21.04.20 14:52, Michal Hocko wrote: > > On Tue 21-04-20 14:35:12, David Hildenbrand wrote: > >> On 21.04.20 14:30, Michal Hocko wrote: > >>> Sorry for the late reply > >>> > >>> On Thu 16-04-20 12:47:06, David Hildenbrand wrote: > >>>> A hotadded node/pgdat will span no pages at all, until memory is moved to > >>>> the zone/node via move_pfn_range_to_zone() -> resize_pgdat_range - e.g., > >>>> when onlining memory blocks. We don't have to initialize the > >>>> node_start_pfn to the memory we are adding. > >>> > >>> You are right that the node is empty at this phase but that is already > >>> reflected by zero present pages (hmm, I do not see spanned pages to be > >>> set 0 though). What I am missing here is why this is an improvement. The > >>> new node is already visible here and I do not see why we hide the > >>> information we already know. > >> > >> "information we already know" - no, not before we online the memory. > > > > Is this really the case? All add_memory_resource users operate on a > > physical memory range. > > Having the first add_memory() to magically set node_start_pfn of a hotplugged > node isn't dangerous, I think we agree on that. It's just completely > unnecessary here and at least left me confused why this is needed at all- > because the node start/end pfn is only really touched when > onlining/offlining memory (when resizing the zone and the pgdat). I do not see any specific problem. It just feels odd to ignore the start pfn when we have that information. I am little bit worried that this might kick back. E.g. say we start using the memmaps from the hotplugged memory then the initial part of the node will never get online and we would have memmaps outside of the node span. I do not see an immediate problem except for the feeling this is odd. That being said I will shut up now and leave it alone. [...] > > Btw. one thing that I have in my notes, I was never able to actually > > test the no numa node case. Because I have always been testing with node > > being allocated during the boot. Do you have any way to trigger this > > path? > > Sure, here is my test case > > #! /bin/bash > sudo qemu-system-x86_64 \ > --enable-kvm \ > -m 4G,maxmem=20G,slots=2 \ > -smp sockets=2,cores=2 \ > -numa node,nodeid=0,cpus=0-1,mem=4G -numa node,nodeid=1,mem=0G \ I have been using a similar command line NUMA_ONE_MEMORY_LESS_NODE="-numa node,mem=2G -numa node,mem=0G" which gets appended to the qemu cmdline. I have always thought that this would allocate pgdat for node 1 though. I have checked that again now and dmesg doesn't point to node 1 anywhere. Thanks!
On 22.04.20 10:21, Michal Hocko wrote: > On Tue 21-04-20 15:06:20, David Hildenbrand wrote: >> On 21.04.20 14:52, Michal Hocko wrote: >>> On Tue 21-04-20 14:35:12, David Hildenbrand wrote: >>>> On 21.04.20 14:30, Michal Hocko wrote: >>>>> Sorry for the late reply >>>>> >>>>> On Thu 16-04-20 12:47:06, David Hildenbrand wrote: >>>>>> A hotadded node/pgdat will span no pages at all, until memory is moved to >>>>>> the zone/node via move_pfn_range_to_zone() -> resize_pgdat_range - e.g., >>>>>> when onlining memory blocks. We don't have to initialize the >>>>>> node_start_pfn to the memory we are adding. >>>>> >>>>> You are right that the node is empty at this phase but that is already >>>>> reflected by zero present pages (hmm, I do not see spanned pages to be >>>>> set 0 though). What I am missing here is why this is an improvement. The >>>>> new node is already visible here and I do not see why we hide the >>>>> information we already know. >>>> >>>> "information we already know" - no, not before we online the memory. >>> >>> Is this really the case? All add_memory_resource users operate on a >>> physical memory range. >> >> Having the first add_memory() to magically set node_start_pfn of a hotplugged >> node isn't dangerous, I think we agree on that. It's just completely >> unnecessary here and at least left me confused why this is needed at all- >> because the node start/end pfn is only really touched when >> onlining/offlining memory (when resizing the zone and the pgdat). > > I do not see any specific problem. It just feels odd to > ignore the start pfn when we have that information. I am little bit > worried that this might kick back. E.g. say we start using the memmaps > from the hotplugged memory then the initial part of the node will never> get online and we would have memmaps outside of the node span. I do not That's a general issue, which I pointed out as response to Oscars last series. This needs more thought and reworks, especially how node_start_pfn/node_spanned_pages are glued to memory onlining/offlining today. > see an immediate problem except for the feeling this is odd. I think it's inconsistent. E.g., start with memory-less/cpu-less node and don't online memory from the kernel immediately. Hotplug CPU. PGDAT initialized with node_start_pfn=0. Hotplug memory. -> node_start_pfn=0 until memory is actually onlined. Hotplug memory. PGDAT initialized with node_start_pfn=$VALUE. Hotplug CPU. -> node_start_pfn=$VALUE Hotplug memory. PGDAT initialized with node_start_pfn=$VALUE. Hotplug CPU. Hotunplug memory. -> node_start_pfn=$VALUE, although there is no memory anymore. Hotplug memory 1. PGDAT initialized with node_start_pfn=$VALUE. Hotplug memory 2. Hotunplug memory 2. -> node_start_pfn=$VALUE1 instead of $VALUE2. Again, because node_start_pfn has absolutely no meaning until memory is actually onlined - today. > > That being said I will shut up now and leave it alone. Is that a nack? Thanks for having a look!
On Wed 22-04-20 10:32:32, David Hildenbrand wrote: > On 22.04.20 10:21, Michal Hocko wrote: > > On Tue 21-04-20 15:06:20, David Hildenbrand wrote: > >> On 21.04.20 14:52, Michal Hocko wrote: > >>> On Tue 21-04-20 14:35:12, David Hildenbrand wrote: > >>>> On 21.04.20 14:30, Michal Hocko wrote: > >>>>> Sorry for the late reply > >>>>> > >>>>> On Thu 16-04-20 12:47:06, David Hildenbrand wrote: > >>>>>> A hotadded node/pgdat will span no pages at all, until memory is moved to > >>>>>> the zone/node via move_pfn_range_to_zone() -> resize_pgdat_range - e.g., > >>>>>> when onlining memory blocks. We don't have to initialize the > >>>>>> node_start_pfn to the memory we are adding. > >>>>> > >>>>> You are right that the node is empty at this phase but that is already > >>>>> reflected by zero present pages (hmm, I do not see spanned pages to be > >>>>> set 0 though). What I am missing here is why this is an improvement. The > >>>>> new node is already visible here and I do not see why we hide the > >>>>> information we already know. > >>>> > >>>> "information we already know" - no, not before we online the memory. > >>> > >>> Is this really the case? All add_memory_resource users operate on a > >>> physical memory range. > >> > >> Having the first add_memory() to magically set node_start_pfn of a hotplugged > >> node isn't dangerous, I think we agree on that. It's just completely > >> unnecessary here and at least left me confused why this is needed at all- > >> because the node start/end pfn is only really touched when > >> onlining/offlining memory (when resizing the zone and the pgdat). > > > > I do not see any specific problem. It just feels odd to > > ignore the start pfn when we have that information. I am little bit > > worried that this might kick back. E.g. say we start using the memmaps > > from the hotplugged memory then the initial part of the node will never> get online and we would have memmaps outside of the node span. I do not > > That's a general issue, which I pointed out as response to Oscars last > series. This needs more thought and reworks, especially how > node_start_pfn/node_spanned_pages are glued to memory onlining/offlining > today. > > > see an immediate problem except for the feeling this is odd. > > I think it's inconsistent. E.g., start with memory-less/cpu-less node > and don't online memory from the kernel immediately. > > Hotplug CPU. PGDAT initialized with node_start_pfn=0. Hotplug memory. > -> node_start_pfn=0 until memory is actually onlined. > > Hotplug memory. PGDAT initialized with node_start_pfn=$VALUE. Hotplug CPU. > -> node_start_pfn=$VALUE > > Hotplug memory. PGDAT initialized with node_start_pfn=$VALUE. Hotplug > CPU. Hotunplug memory. > -> node_start_pfn=$VALUE, although there is no memory anymore. > > Hotplug memory 1. PGDAT initialized with node_start_pfn=$VALUE. Hotplug > memory 2. Hotunplug memory 2. > -> node_start_pfn=$VALUE1 instead of $VALUE2. > > > Again, because node_start_pfn has absolutely no meaning until memory is > actually onlined - today. > > > > > That being said I will shut up now and leave it alone. > > Is that a nack? No it's not. Nor I am going to ack this but I will not stand in the way. I would just urge to have as many assumptions you are making and as much information in the changelog as possible.
diff --git a/mm/memory_hotplug.c b/mm/memory_hotplug.c index 47cf6036eb31..9b15ce465be2 100644 --- a/mm/memory_hotplug.c +++ b/mm/memory_hotplug.c @@ -866,10 +866,9 @@ static void reset_node_present_pages(pg_data_t *pgdat) } /* we are OK calling __meminit stuff here - we have CONFIG_MEMORY_HOTPLUG */ -static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start) +static pg_data_t __ref *hotadd_new_pgdat(int nid) { struct pglist_data *pgdat; - unsigned long start_pfn = PFN_DOWN(start); pgdat = NODE_DATA(nid); if (!pgdat) { @@ -899,9 +898,8 @@ static pg_data_t __ref *hotadd_new_pgdat(int nid, u64 start) } /* we can use NODE_DATA(nid) from here */ - pgdat->node_id = nid; - pgdat->node_start_pfn = start_pfn; + pgdat->node_start_pfn = 0; /* init node's zones as empty zones, we don't have any present pages.*/ free_area_init_core_hotplug(nid); @@ -936,7 +934,6 @@ static void rollback_node_hotadd(int nid) /** * try_online_node - online a node if offlined * @nid: the node ID - * @start: start addr of the node * @set_node_online: Whether we want to online the node * called by cpu_up() to online a node without onlined memory. * @@ -945,7 +942,7 @@ static void rollback_node_hotadd(int nid) * 0 -> the node is already online * -ENOMEM -> the node could not be allocated */ -static int __try_online_node(int nid, u64 start, bool set_node_online) +static int __try_online_node(int nid, bool set_node_online) { pg_data_t *pgdat; int ret = 1; @@ -953,7 +950,7 @@ static int __try_online_node(int nid, u64 start, bool set_node_online) if (node_online(nid)) return 0; - pgdat = hotadd_new_pgdat(nid, start); + pgdat = hotadd_new_pgdat(nid); if (!pgdat) { pr_err("Cannot online node %d due to NULL pgdat\n", nid); ret = -ENOMEM; @@ -977,7 +974,7 @@ int try_online_node(int nid) int ret; mem_hotplug_begin(); - ret = __try_online_node(nid, 0, true); + ret = __try_online_node(nid, true); mem_hotplug_done(); return ret; } @@ -1031,7 +1028,7 @@ int __ref add_memory_resource(int nid, struct resource *res) */ memblock_add_node(start, size, nid); - ret = __try_online_node(nid, start, false); + ret = __try_online_node(nid, false); if (ret < 0) goto error; new_node = ret;
A hotadded node/pgdat will span no pages at all, until memory is moved to the zone/node via move_pfn_range_to_zone() -> resize_pgdat_range - e.g., when onlining memory blocks. We don't have to initialize the node_start_pfn to the memory we are adding. Note: we'll also end up with pgdat->node_start_pfn == 0 when offlined the last memory block belonging to a node (via remove_pfn_range_from_zone()-> update_pgdat_span()). Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Michal Hocko <mhocko@kernel.org> Cc: Baoquan He <bhe@redhat.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Pankaj Gupta <pankaj.gupta.linux@gmail.com> Signed-off-by: David Hildenbrand <david@redhat.com> --- mm/memory_hotplug.c | 15 ++++++--------- 1 file changed, 6 insertions(+), 9 deletions(-)