| Message ID | 1587421629-914-4-git-send-email-ben.levinsky@xilinx.com (mailing list archive) |
|---|---|
| State | Superseded |
| Headers | show |
| Series | remoteproc: Add zynqmp_r5 driver | expand |
On 21. 04. 20 0:27, Ben Levinsky wrote: > This patch adds APIs to provide access and a configuration interface > to the current power state of a sub-system on Zynqmp sub-system. > > Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com> > --- > changes since v2: > - add xilinx-related platform mgmt fn's instead of wrapping around > function pointer in xilinx eemi ops struct > --- > drivers/firmware/xilinx/zynqmp.c | 101 +++++++++++++++++++++++++++++++++++ > include/linux/firmware/xlnx-zynqmp.h | 30 +++++++++++ > 2 files changed, 131 insertions(+) > > diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c > index b0d140f..e0a906e 100644 > --- a/drivers/firmware/xilinx/zynqmp.c > +++ b/drivers/firmware/xilinx/zynqmp.c > @@ -845,6 +845,63 @@ int zynqmp_pm_release_node(const u32 node) > EXPORT_SYMBOL_GPL(zynqmp_pm_release_node); > > /** > + * zynqmp_pm_get_rpu_mode() - Get RPU mode > + * @node_id: Node ID of the device > + * @arg1: Argument 1 to requested IOCTL call > + * @arg2: Argument 2 to requested IOCTL call > + * @out: Returned output value > + * > + * Return: Returns RPU mode ditto. > + */ > +int zynqmp_pm_get_rpu_mode(u32 node_id, > + u32 arg1, u32 arg2, u32 *out) > +{ > + return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, > + IOCTL_GET_RPU_OPER_MODE, 0, 0, out); > +} > +EXPORT_SYMBOL_GPL(zynqmp_pm_get_rpu_mode); > + > +/** > + * zynqmp_pm_set_rpu_mode() - Set RPU mode > + * @node_id: Node ID of the device > + * @ioctl_id: ID of the requested IOCTL > + * @arg2: Argument 2 to requested IOCTL call > + * @out: Returned output value > + * > + * This function is used to set RPU mode. > + * > + * Return: Returns status, either success or error+reason > + */ > +int zynqmp_pm_set_rpu_mode(u32 node_id, > + u32 arg1, u32 arg2, u32 *out) > +{ > + return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, > + IOCTL_SET_RPU_OPER_MODE, 0, 0, out); > +} > +EXPORT_SYMBOL_GPL(zynqmp_pm_set_rpu_mode); > + > +/** > + * zynqmp_pm_tcm_comb_config - configure TCM > + * @node_id: Node ID of the device > + * @arg1: Argument 1 to requested IOCTL call > + * @arg2: Argument 2 to requested IOCTL call > + * @out: Returned output value > + * > + * This function is used to set RPU mode. > + * > + * Return: Returns status, either success or error+reason > + */ > +int zynqmp_pm_set_tcm_config(u32 node_id, > + u32 arg1, u32 arg2, u32 *out) > +{ > + return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, > + IOCTL_TCM_COMB_CONFIG, 0, 0, out); > + > +} > +EXPORT_SYMBOL_GPL(zynqmp_pm_set_tcm_config); > + > + double space here. > +/** > * zynqmp_pm_force_powerdown - PM call to request for another PU or subsystem to > * be powered down forcefully > * @target: Node ID of the targeted PU or subsystem > @@ -880,6 +937,50 @@ int zynqmp_pm_request_wakeup(const u32 node, > EXPORT_SYMBOL_GPL(zynqmp_pm_request_wakeup); > > /** > + * zynqmp_pm_get_node_status - PM call to request a node's current power state > + * @node: ID of the component or sub-system in question > + * @status: Current operating state of the requested node > + * @requirements: Current requirements asserted on the node, > + * used for slave nodes only. > + * @usage: Usage information, used for slave nodes only: > + * PM_USAGE_NO_MASTER - No master is currently using > + * the node > + * PM_USAGE_CURRENT_MASTER - Only requesting master is > + * currently using the node > + * PM_USAGE_OTHER_MASTER - Only other masters are > + * currently using the node > + * PM_USAGE_BOTH_MASTERS - Both the current and at least > + * one other master is currently > + * using the node > + * > + * Return: Returns status, either success or error+reason > + */ > +int zynqmp_pm_get_node_status(const u32 node, > + u32 *status, u32 *requirements, > + u32 *usage) > + > +{ > + u32 ret_payload[PAYLOAD_ARG_CNT]; > + int ret; > + > + if (!status) > + return -EINVAL; > + > + ret = zynqmp_pm_invoke_fn(PM_GET_NODE_STATUS, node, 0, 0, > + 0, ret_payload); > + if (ret_payload[0] == XST_PM_SUCCESS) { > + *status = ret_payload[1]; > + if (requirements) > + *requirements = ret_payload[2]; > + if (usage) > + *usage = ret_payload[3]; > + } > + > + return ret; indentation. M
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c index b0d140f..e0a906e 100644 --- a/drivers/firmware/xilinx/zynqmp.c +++ b/drivers/firmware/xilinx/zynqmp.c @@ -845,6 +845,63 @@ int zynqmp_pm_release_node(const u32 node) EXPORT_SYMBOL_GPL(zynqmp_pm_release_node); /** + * zynqmp_pm_get_rpu_mode() - Get RPU mode + * @node_id: Node ID of the device + * @arg1: Argument 1 to requested IOCTL call + * @arg2: Argument 2 to requested IOCTL call + * @out: Returned output value + * + * Return: Returns RPU mode + */ +int zynqmp_pm_get_rpu_mode(u32 node_id, + u32 arg1, u32 arg2, u32 *out) +{ + return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, + IOCTL_GET_RPU_OPER_MODE, 0, 0, out); +} +EXPORT_SYMBOL_GPL(zynqmp_pm_get_rpu_mode); + +/** + * zynqmp_pm_set_rpu_mode() - Set RPU mode + * @node_id: Node ID of the device + * @ioctl_id: ID of the requested IOCTL + * @arg2: Argument 2 to requested IOCTL call + * @out: Returned output value + * + * This function is used to set RPU mode. + * + * Return: Returns status, either success or error+reason + */ +int zynqmp_pm_set_rpu_mode(u32 node_id, + u32 arg1, u32 arg2, u32 *out) +{ + return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, + IOCTL_SET_RPU_OPER_MODE, 0, 0, out); +} +EXPORT_SYMBOL_GPL(zynqmp_pm_set_rpu_mode); + +/** + * zynqmp_pm_tcm_comb_config - configure TCM + * @node_id: Node ID of the device + * @arg1: Argument 1 to requested IOCTL call + * @arg2: Argument 2 to requested IOCTL call + * @out: Returned output value + * + * This function is used to set RPU mode. + * + * Return: Returns status, either success or error+reason + */ +int zynqmp_pm_set_tcm_config(u32 node_id, + u32 arg1, u32 arg2, u32 *out) +{ + return zynqmp_pm_invoke_fn(PM_IOCTL, node_id, + IOCTL_TCM_COMB_CONFIG, 0, 0, out); + +} +EXPORT_SYMBOL_GPL(zynqmp_pm_set_tcm_config); + + +/** * zynqmp_pm_force_powerdown - PM call to request for another PU or subsystem to * be powered down forcefully * @target: Node ID of the targeted PU or subsystem @@ -880,6 +937,50 @@ int zynqmp_pm_request_wakeup(const u32 node, EXPORT_SYMBOL_GPL(zynqmp_pm_request_wakeup); /** + * zynqmp_pm_get_node_status - PM call to request a node's current power state + * @node: ID of the component or sub-system in question + * @status: Current operating state of the requested node + * @requirements: Current requirements asserted on the node, + * used for slave nodes only. + * @usage: Usage information, used for slave nodes only: + * PM_USAGE_NO_MASTER - No master is currently using + * the node + * PM_USAGE_CURRENT_MASTER - Only requesting master is + * currently using the node + * PM_USAGE_OTHER_MASTER - Only other masters are + * currently using the node + * PM_USAGE_BOTH_MASTERS - Both the current and at least + * one other master is currently + * using the node + * + * Return: Returns status, either success or error+reason + */ +int zynqmp_pm_get_node_status(const u32 node, + u32 *status, u32 *requirements, + u32 *usage) + +{ + u32 ret_payload[PAYLOAD_ARG_CNT]; + int ret; + + if (!status) + return -EINVAL; + + ret = zynqmp_pm_invoke_fn(PM_GET_NODE_STATUS, node, 0, 0, + 0, ret_payload); + if (ret_payload[0] == XST_PM_SUCCESS) { + *status = ret_payload[1]; + if (requirements) + *requirements = ret_payload[2]; + if (usage) + *usage = ret_payload[3]; + } + + return ret; +} +EXPORT_SYMBOL_GPL(zynqmp_pm_get_node_status); + +/** * zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves * @node: Node ID of the slave * @capabilities: Requested capabilities of the slave diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h index 1235923..c123d1b 100644 --- a/include/linux/firmware/xlnx-zynqmp.h +++ b/include/linux/firmware/xlnx-zynqmp.h @@ -64,6 +64,7 @@ enum pm_api_id { PM_GET_API_VERSION = 1, + PM_GET_NODE_STATUS = 3, PM_FORCE_POWERDOWN = 8, PM_REQUEST_WAKEUP = 10, PM_SYSTEM_SHUTDOWN = 12, @@ -384,6 +385,14 @@ int zynqmp_pm_request_wakeup(const u32 node, const bool set_addr, const u64 address, const enum zynqmp_pm_request_ack ack); +int zynqmp_pm_get_node_status(const u32 node, u32 *status, + u32 *requirements, u32 *usage); +int zynqmp_pm_get_rpu_mode(u32 node_id, + u32 arg1, u32 arg2, u32 *out); +int zynqmp_pm_set_rpu_mode(u32 node_id, + u32 arg1, u32 arg2, u32 *out); +int zynqmp_pm_set_tcm_config(u32 node_id, + u32 arg1, u32 arg2, u32 *out); #else static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void) { @@ -546,6 +555,27 @@ static inline int zynqmp_pm_request_wakeup(const u32 node, { return -ENODEV; } +static inline int zynqmp_pm_get_node_status(const u32 node, + u32 *status, u32 *requirements, + u32 *usage) +{ + return -ENODEV; +} +static inline int zynqmp_pm_get_rpu_mode(u32 node_id, + u32 arg1, u32 arg2, u32 *out) +{ + return -ENODEV; +} +static inline int zynqmp_pm_set_rpu_mode(u32 node_id, + u32 arg1, u32 arg2, u32 *out) +{ + return -ENODEV; +} +static inline int zynqmp_pm_set_tcm_config(u32 node_id, + u32 arg1, u32 arg2, u32 *out) +{ + return -ENODEV; +} #endif #endif /* __FIRMWARE_ZYNQMP_H__ */
This patch adds APIs to provide access and a configuration interface to the current power state of a sub-system on Zynqmp sub-system. Signed-off-by: Ben Levinsky <ben.levinsky@xilinx.com> --- changes since v2: - add xilinx-related platform mgmt fn's instead of wrapping around function pointer in xilinx eemi ops struct --- drivers/firmware/xilinx/zynqmp.c | 101 +++++++++++++++++++++++++++++++++++ include/linux/firmware/xlnx-zynqmp.h | 30 +++++++++++ 2 files changed, 131 insertions(+)